Opis DIGITALNI DRAJVER STEP MOTORA MODEL : 542C RADNI NAPON : DC 12~36V RADNA STRUJA : 1.0A~4.2A , 8 STEPENA REGULACIJE STRUJE

Kontroler i drajver step motora koji na sebi ima ULN2003 koji služi za pogon motora i 4 LED diode koje služe za kontrolu stanja pojedinih izlaza. Komplet kao stvoren za kontrolu mikrokontrolerom i eksperimentisanje. Karakteristike: - Napon: 5~12 V DC - Čip: ULN2003 - 4-fazna LED indikacija: A, B, C, D - Dimeznije: 3.5 x 3 x 1 cm

Step motor drajver za bipolarne motore za Reprap 4 PCB Board RUMBA Pogodan za male CNC mašine i ARDUINO projekte. Drajver koji je naprednija verzija drajvera A4988. Karakteristike: - Model: DRV8825 - Mikrostep: 1 do 1/32 - Podešavanje maximalne struje - Prekostrujna zaštita - Temperaturna zaštita - Napajanje 8,2-45 V DC - Nominalna struja: 1.5A po fazi bez dodatnog hlađenja - Maximalna struja: do 2.2A po fazi sa OBAVEZNIM HLAĐNJEM - Hladnjak u kompletu

Step motor drajver za bipolarne motore za RAMPS Prusa I3 GT2560 Pogodan za male CNC mašine i ARDUINO projekte. Karakteristike: - Model: A4988 - Mikrostep: 1 do 1/16 - Podešavanje maximalne struje - Prekostrujna zaštita - Temperaturna zaštita - Napajanje 8-35 V DC - Nominalna struja: 1A po fazi bez dodatnog hlađenja - Maximalna struja: do 2A po fazi sa OBAVEZNIM HLAĐNJEM - Hladnjak u kompletu

Ovaj kontroler koristi L9110S cip za upravljanje do 2 DC motora ili 1 4 zilni dvofazni steper motor. Radni napon modula je od 2.5 do 12V DC. Tehnicke karakteristike: Napajanje: 2.5-12V DC Maksimalna struja: 800 mA Radna temperatura: 0-80 ℃ Kontroler: L9110S Sifra: B1163

Drajver za step motor do 4.5A. Koristi se za jednu osu CNC ili neke druge masine koja koristi step motore. Koristi Toshibine drajvere TB6600. Napon napajanja: 10-36V Izlazna struja: do 4.5A Opticki izolovan ulaz brzim optokaplerima. . Zastita od prevelikog i premalog napona, prevelike struje i kratkog spoja. Dimenzije: 8x5x3.5 cm Iako za ovaj chip cesto stoji da je za napone do 45V iz iskustva korisnika ga ne bi trebalo napajati sa vise od 36V.

Drajver step motora sa ULN2003 chipom. Odredjeni ulaz direktno ukljucuje isti izlaz. A, B, C, D Led diode signaliziraju koji je izlaz aktivan. Dimenzije: :2.8cm x 2.8cm x 2cm Napajanje: 5-12V DC

Modul za pogon DC motora zasnovan na cipu L298N. Može da pogoni jedan step motor bipolarni ili dva DC motora. Za napajanje logičkog dela ima ugrađeni regulator napona 78M05. Maksimalna jacina struje je 2A po fazi (motoru), a napon napajanja 5-35V. Specifikacija: - Dopli H mosni drajver - Čip: L298N (ST) - Napon logičkog dela: 5V DC - Struja logičkog dela: 0-36 mA - Napon motora: 5-35V DC - Struja: 2A maksimalno po motoru - Maksimalna snaga: 25W - Dimenzije: 43 x 43 x 26 mm Note: This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available. When ENA enable IN1 IN2 control OUT1 OUT2 When ENB enable IN3 IN4 control OUT3 OUT4

ŠIFRA: 106 - Drajver za step motore sa integralnim kolom L298, - Mogućnost kontrole putem CNC mašine, - Modul može da se koristi za kontrolu 2 DC motora ili jednog bipolarnog step motora, - Poseduje 2 H odvojene grane sa maximalnom strujom od 2A po grani, - Sadrži interni stabilizator napona na 5V za napajanje logičkog dela modula, - Napon napajanja motora: 5-35VDC, - Napon napajanja logičkog dela: 4.5-5.5VDC, - Maksimalna potrošnja struje logičkog dela: 0-36mA, - Radna temperatura: -25...+130°C, - Maksimalna struja po jednoj grani: 2A, - Maksimalna snaga: 20W, - LED indikator, - Dimenzije modula: 55x60x30mm.

DRV8825 Drajver step motora sa hladnjakom.Novo, upakovano.Cena je za je 4 drajvera.

Mali drajver step motora sa kolom L9110S. Moze da sluzi za pogon jednog step motora ili dva mala DC motora i idealan je za eksperimente sa arduino ili drugim razvojnim sistemima. Radni napon: DC 2.5-12V Maksimalna struja: 800mA po kanalu Dimenzije: 29.2(mm)x23(mm)

Drajver za step motor do 3A (3.5A u piku). Koristi se za jednu osu CNC ili neke druge masine koja koristi step motore. Koristi Toshibine drajvere TB6560. Napon napajanja: 10-35V Izlazna struja: 0.3-3A Radna temperatura: -10 to 45 ℃ Opticki izolovan ulaz brzim optokaplerima.. Zastita od prevelikog i premalog napona, prevelike struje i kratkog spoja. Maze da smanji struju ako nema koraka i da na taj nacin smanji grejanje motora Podrzava mikrokorake: 1, 1/2, 1/8 ,1/16 Dimenzije: 50 * 75 * 35mm

Kontroler sa drajverom step motora Kontroler koji sadrži i drajver namenjen za male step motore radnog napona od 5-12v i struje do 800ma max. Može da im se kontroliše brzina kao i promena smera, a ako se povežu limit svič prekidači i krajnja pozicija na kojoj se kad je dostignu zaustavlja motor. Može da se koristi za motore koji imaju 2 faze i 4 žice i za motore koji imaju 4 faze i 5 žica. Osnovne karakteristike: - Radni napon: DC 5-12 V - Struja motora: do 800 mA - Dimenzije: 60 x 44 x 16 mm - Zaštita od preopterećenja i pregrejavanja Working Mode Drive control board has 4 working modes to choose: common mode 1; Normal mode 2; Dot mode; Automatic round-trip mode. Normal mode 1: S1 start/stop button, S2 forward/backward button, W2 potentiometer speed control. If limit reversal is required, two limit switches can be connected to the P3 pin, and the motor motion shaft is mounted with contacts, so that the motor will reciprocate within the stroke between the two limit switches. Normal mode 2: Click S1 button to start forwards, S2 backwards, click any button again to stop. W2 potentiometer speed regulation. If the limit stop is required, two limit switches can be connected to the P3 pin, so that the motor will stop moving when it touches the limit switch, and the motor will reverse after the opposite button is clicked. Jog mode: S1 presses the forward rotation, releases the stop, S2 presses the reverse rotation, releases the stop, and the W2 potentiometer adjusts the speed. If a limit stop is required, the upper limit switch can be connected to P3. Automatic round-trip mode: S1 starts and stops, S2 is reversed, W2 potentiometer speeds, and W1 potentiometer adjusts the automatic round-trip steps. After starting, the motor automatically runs back and forth within the number of steps adjusted by W1. Functional specifications Following figure shows S1 and S2 control buttons with different functions in different modes. Please refer to P4 pin function description for details. Below is the description of W2 and P2 W2 motor speed adjustment potentiometer, counterclockwise adjustment becomes slow, clockwise adjustment becomes fast. P2 speed adjustment extension gear pin, W2 adjustment range is: the slowest 3.125 seconds per step to the fastest 0.0625 seconds per step (16 steps/second). In fast mode, the W2 can be adjusted from 0.0625 seconds per step (16 steps/S) to 0.00125 seconds per step (800 steps/S). Below is the description of W1 and P1 W1 automatic round-trip stroke adjustment potentiometer, counterclockwise adjustment stroke becomes shorter, clockwise adjustment stroke becomes longer. P1 automatic round trip adjustment expansion pin. In short stroke gear, W1 can adjust the number of steps from 1 to 200. W1 can adjust the number of steps from 200 to 1200 in long stroke gear. Figure below is the function description of P3 pin. External stroke switch can also be used for high and low level signals of various sensors. Low level is effective. The function varies with the mode. For details, see P4 Pin function description. Following figure shows the pin functions of P5 and P6 P5 stepper motor output pin, according to whether you choose 2-phase 4-wire or 4-phase 5-wire stepper motor, correctly connect the wire according to the characters on the board. P6 power input pin, can be connected to 5V-12V DC power supply. Note: (1) if you want to change any function pins of P1, P2 and P4, you need to disconnect the power supply on the board and power on the selected function again to take effect. (2) when the load current exceeds 800mA circuit protection, the running indicator light flashing every 2 seconds, then need to reduce the working voltage or replace the motor can work normally.

Drajver za CNC mašinu - 5A step motor - TB6600 Drajver za jednu osu tj. jedan motor za CNC mašinu. Karakteristike: - Maksimalna struja: 4 A - Napajanje: 9-40 V DC - Čip: TB6600 sa prekostrujom zaštitom, zaštitom od pregrevanja itd - Optički izolovan brzim optokaplerom - Podržava mikrokorake: 1, 1/2, 1/4, 1/8, 1/16, 1/32 - Podešavanje struje: 0.7 1.2 1.7 2.2 2.7 2.9 3.2 i 4A - Radna temperatura: -10~45 ℃ - Dimenzije: 96 x 55 x 27 mm

Drajver step motora sa A4988, zgodan za manje cnc masine i projekte sa arduinom ili drugim razvojnim sistemima i mikrokontrolerima. Brief introduction A4988 is a complete microstepping motor driver with built-in translator for easy operation. The product can be full, half, 1/4, 1/8 and 1/16 step mode to operate bipolar stepper motor output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator can slow or mixed decay mode. The converter is the key to the easy implementation of the A4988. In inputting one pulse on the STEP input drives the motor one microstep. No phase sequence tables, high frequency control lines, or complex interfaces to programming. A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened. Micro-step operation, the chopping control in the A4988 automatically selects the current decay mode (Slow or Mixed). In the mixed decay mode, the device is initially set to fast decay in the part of the fixed off-time, then a slow decay in the rest of the downtime. Mixed-decay current control scheme results in reduced audible motor noise, increased step accuracy, and reduced power consumption. Internal synchronous rectification control circuitry to improve the pulse-width modulation (PWM) power consumption when operating. Internal circuit protection includes: thermal shutdown with hysteresis, undervoltage lockout (UVLO) and crossover current protection. Special power-Sort. A4988 surface mount QFN package (ES), the size of 5 mm × 5 mm nominal overall package height of 0.90 mm​​, and with exposed pad for enhanced thermal dissipation. The package is Pb (suffixes-T), with 100% matte tin leadframe plating. Features and Benefits Low RDS (ON) outputs Automatic current decay mode detection / selection Mixed with slow current decay modes Synchronous rectification for low power dissipation Internal UVLO Crossover-current protection 3.3 and 5 V compatible logic supply Thermal shutdown circuitry Ground Fault Circuit Load short-circuit protection Of five optional step mode: full, 1/2, 1/4, 1/8 and 1/16

CNC shield za arduino sa 4 drajvera step motora A4988.Sve novo upakovano.

Drajver za step motor sa kolom L298. Moze da se kontrolise motor neke CNC masine ili za neku drugu namenu. Maksimalna struja: 2A. Maksimalna potrosnja: 20W Dimenzije: 54 X 49 X 27mm

Kontroler i drajver ULN2003 i step motor 28BYJ-48 U kompletu dolazi Step motor sa modulom koji na sebi ima ULN2003 koji služi za pogon samog motora i 4 ledice koje služe za kontrolu stanja pojedinih izlaza. Komplet kao stvoren za kontrolu mikrokontrolerom i eksperimentisanje. Karakteristike: - Napon: 5V DC - Prečnik motora: 28 mm - Ugao koraka: 5.625 x 1/64 - Odnos redukcije motora: 1/64 - Čip drajvera: ULN2003 - Motor: 28BYJ-48 - 4-fazna LED indikacija: A, B, C, D - Dimeznije modula: 2.8 x 2.8 x 2 cm - Dimenzije motora: 3.2 x 3.2 cm

CNC kontroler - drajver za 1 step motor do 3A (3.5A u piku). Napon napajanja: 10-35V Izlazna struja: 0.3-3A Radna temperatura: -10 to 45 ℃ Optički izolovan ulaz brzim optokaplerima. Zaštita od prevelikog i premalog napona, prevelike struje i kratkog spoja. Može da smanji struju ako nema koraka i da na taj način smanji grejanje motora Podržava mikrokorake: 1, 1/2, 1/8 ,1/16 Dimenzije: 50 * 75 * 35mm Features: Recommended to use a switching power supply DC24V power supply. 6N137 high-speed optical coupling, guarantee high speed without losing step. Using the TB6560AHQ chip with low voltage shutdown, overheating stop and overcurrent protection circuit to ensure optimal performance. Rated maximum output: ± 3A, peak 3.5A. For two-phase within 42,57 stepping 3A / four-phase / of line four / six-wire stepper motor, and is not suitable for more than 3A stepper motor. Automatic half current function. Subdivision: whole step, half-step, step 1/8, 1/16 step, a maximum of 16 subdivisions. Specifications: Working voltage: DC 10-35V Rated maximum output: ± 3A, peak 3.5A. Size:75 x 50 x 33mm KEY: step motor drajver kontroler POZICIJA: 00035

Kontroler i drajver za CNC mašinu - 4.5A step motor - TB6600 Kontroler i drajver za jednu osu tj jedan motor za CNC mašinu. Karakteristike: - Maksimalna struja: 4.5A - Napajanje: 10-45 V DC (preporuka 32V) - Čip: TB6600 Toshiba sa prekostrujom zaštitom, zaštitom od pregrevanja, prevelikog i premalog napona, kratkog spoja itd - Optički izolovan brzim optokaplerom 6N137 - Podržava mikrokorake: 1, 1/2, 1/8, 1/16 - Podržani motori: 2-fazni, 4-fazni, 4-žičani i 6-žičani - Dimenzije: 82 x 50 x 35 mm

Generator pulsa za stepmotore Kontroler step motora MKS OSC v1.0 služi za davanje signala drajveru step motora i omogućava dodatnu kontrolu rada step motora. Uz ovaj kontroler i drajver (ne isporučuje se sa kontrolerom), dobija se jednostavna platforma za upravljanje step motorom. Kontroler podržava 3 različita opsega: 5.4k-160khz, 540-16.6khz, 80-2.4khz. Podešavanje se vrši jumper-ima na ploči. Na ivicama se nalaze otvori za montažu. Na ploči se nalaze i dva prekidača: ON-OFF kao i prekidač za promenu smera. Osnovne karakteristike: - Model: Kontroler step motora MKS OSC v1.0 - Opseg: 5.4k-160khz, 540-16.6khz, 80-2.4khz - Dimenzije: 38.6mm x 58mmOvo je jedan jako koristan kontroler za sve kojima je potrebno da upotrebe step motor kao obican motor ili za testriranje istih. Generise sve potrebne upravljacke impulse a ima i promenu smera motora. Brzina okretanja motora se regulise potenciometrom. Sve sto treba da uradite je da povezete ovaj kontroler na drajver od vaseg motora i zabava moze da pocne. Originalni opis: Feature: 1, this module is a pulse generation module, supply the control signal to stepper driver. To control the stepper motor, it must be equipped with a drive. 2, this simple controller + stepper motor + stepper motor + DC power supply can be composed of a simple set of control platform. 3, the controller has high 5.4k-160khz, middle 540-16.6khz, low 80-2.4khz total of 3 kinds of low frequency signal can be used to select the jumper. 4, can produce pulse signal, can also produce PWM signal, can choose the jumper. 5, the frequency of measurement: PUL and common cathode end. Different stepper driver may mark different name EN=ENA=FREE Enable PUL=PULS=CLK Pulse DIR=CW=CWW Direction

Kontroler i drajver za CNC mašinu - 3A (3.5A u pikovima) step motor Kontroler i drajver za jednu osu tj jedan motor za CNC mašinu. Karakteristike: - Maksimalna struja: 3A (3.5A u pikovima) - Napajanje: 10-35 V DC - Čip: TB6560AHQ sa prekostrujom zaštitom, zaštitom od pregrevanja itd - Optički izolovan brzim optokaplerom 6N137 - Podržava mikrokorake: 1, 1/2, 1/8, 1/16 - Dimenzije: 75 x 50 x 35 mm

ŠIFRA: 278 - Step motor sa kontrolerom i drajverom ULN2003, - Napon napajanja: 5VDC, - Prečnik motora: 28mm, - Ugao koraka: 5.625x1/64, - Odnos redukcije motora: 1/64, - Čip drajvera: ULN2003, - Motor: 28BYJ-48, - 4- fazni LED indikator: A, B, C i D, - Dimenzije modula: 2.8x2.8x2cm, - Dimenzije motora: 3.2x3.2cm.

Steper motor koracni motor NEMA 23 i NEMA 34 od 0,5nm do 12nm Prodaja komponenti za CNC samogradnju, automatizaciju, hobi i industriju. * Cene u nasim oglasima su sa PDV-om prikazane u dinarima i evrima. * STEP MOTORI NEMA17 Step motor 42HS40 1.7A 0,42NM 1,500.00 dinara. (12.80€ ) Step motor 42HS60 1.2A 0,52NM 1,650.00 dinara. (14,03€ ) STEP MOTORI NEMA23 Step motor 57HS56 2.80A 1.2NM 2,145.00 dinara (18,24€ ) Step motor 57HS82 3.0A 2.5NM 2,850.00 dinara (24,24€ ) Step motor 57HS112 3.0A 3.0NM 3,850.00 dinara (32,74€ ), *********************************************************************** STEP MOTORI NEMA34 Step motor 86HS78 5.0A 4.0NM 4,815.00 dinara (40.95€ ) Step motor 86HS115 6.0A 8.5NM 6,940.00 dinara (59.02€ ) Step motor 86HS150 6.0A 12,5NM 9.500,00 dinara (80,80€ ) *************************************************************************** DRAJVERI POGODNI ZA STEP MOTORE TB6600… cena 924.00 Din. (7.86€ ) DM556…..cena 2,544.00 Din. (21,59€ ) DM860H….cena 5,160.00 Din. (43.88€ ) **************************************************************** Nosac za step motor NEMA23 200.00 dinara. (1,43€) Nosac za step motor NEMA34 520.00 dinara. (4,42€) Vallder RS DOO 062426034 vallder.rs RADNO VREME 08H-16H

Steper motor koracni motor NEMA 23 i NEMA 34 od 0,5nm do 12nm Prodaja komponenti za CNC samogradnju, automatizaciju, hobi i industriju. * Cene u nasim oglasima su sa PDV-om prikazane u dinarima i evrima. * STEP MOTORI NEMA17 Step motor 42HS40 1.7A 0,42NM 1,500.00 dinara. (12.80€ ) Step motor 42HS60 1.2A 0,52NM 1,650.00 dinara. (14,03€ ) STEP MOTORI NEMA23 Step motor 57HS56 2.80A 1.2NM 2,145.00 dinara (18,24€ ) Step motor 57HS82 3.0A 2.5NM 2,850.00 dinara (24,24€ ) Step motor 57HS112 3.0A 3.0NM 3,850.00 dinara (32,74€ ), *********************************************************************** STEP MOTORI NEMA34 Step motor 86HS78 5.0A 4.0NM 4,815.00 dinara (40.95€ ) Step motor 86HS115 6.0A 8.5NM 6,940.00 dinara (59.02€ ) Step motor 86HS150 6.0A 12,5NM 9.500,00 dinara (80,80€ ) *************************************************************************** DRAJVERI POGODNI ZA STEP MOTORE TB6600... cena 924.00 Din. (7.86€ ) DM556.....cena 2,544.00 Din. (21,59€ ) DM860H....cena 5,160.00 Din. (43.88€ ) **************************************************************** Nosac za step motor NEMA23 200.00 dinara. (1,43€) Nosac za step motor NEMA34 520.00 dinara. (4,42€) Vallder RS DOO 062426034 vallder.rs RADNO VREME 08H-16H