Ortofon’s new Test Record is designed to allow you to verify your HiFi system in the most natural audio surroundings at home. The Test Record contains special test signals developed for analyzing cartridge performance as well as its interaction with your tonearm and turntable. Before testing your cartridge, please verify the HiFi system’s functionality. The left speaker should be connected to the left amplifier channel and vice versa; both speakers should work in phase and be optimally positioned in the room. The Test Record is designed to be played through your system with in-built RIAA equalization. Volume control is recommended to be set at a moderate signal level. Please refer to your turntable and tonearm’s instructions for correct installation and alignment, adjust tonearm to be parallel to record surface, set Vertical Tracking Force and antiskating according to the cartridge’s recommended technical data, and adjust stylus overhang. The new 15-track fine pressing Each side of the record consists of 15 tracks which have been cut from 1-4 and 5-15: 1. Frequency Sweep Left Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB) 2. Frequency Sweep Right Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB) 3. Frequency Sweep Left Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB) 4. Frequency Sweep Right Channel 800 Hz – 50 kHz. Log. 28 sec. Linear cut* (800 – 20000 Hz ±1,5 dB) 5. Reference tone 1000 Hz 5 cm/sec rms Left 6. Reference tone 1000 Hz 5 cm/sec rms Right 7. Reference tone 1000 Hz 5 cm/sec rms Left 8. Reference tone 1000 Hz 5 cm/sec rms Right 9. Tracking ability, lateral 50 μm peak 10. Tracking ability, lateral 60 μm peak 11. Tracking ability, lateral 70 μm peak 12. Tracking ability, lateral 80 μm peak 13. Tracking ability, lateral 90 μm peak 14. Tracking ability, lateral 100 μm peak 15. Square Wave Form 2.7 msec duty cycle 3:7 * The record has a constant amplitude throughout the sweep without any RIAA correction. 1-4 Frequency sweep – a tool for checking frequency response There are several factors which can affect frequency response, including cable capacitance, cartridge loading, tracking force and worn parts. Because of this, it can be difficult to achieve perfectly flat frequency response. Sometimes by making small compromises in the cartridge loading, a better overall frequency response can be achieved. Considering the above the signal must be clean throughout the sweep. 5-8 Reference tone for testing channel output With this standard reference signal is it possible to check the correctness of the connections of the left and right channels, channel balance and speed of the turntable. 9 -14 Tracking ability test, 315 Hz lateral modulation These tracks contain a 315 Hz signal, recorded at increasing pick amplitudes of 50, 60, 70, 80, 90 and 100 micrometers. Please refer to your cartridge’s tracking ability value specified in the technical data sheet. Your cartridge should be able to track the actual level without audible distortion. Inability to track can be heard as a departure from a pure tone or a sputtering and intermittent tone. To determine if it is one or both channels, the balance control can be utilized. In case of differing tracking ability in the left and right channels it is probably necessary to readjust the anti-skating correction of the tonearm. If both channels fail to track properly, then vertical tracking force should be increased until no further improvement of tracking force can be obtained. 15. Square Wave Form 2.7 msec duty cycle 3:7 When monitoring the output of your cartridge with an oscilloscope you’ll then see a square wave located precisely above each other if the connection from the cartridge is correct. After successful completion of the above test procedures, you can ensure that your cartridge is optimized. Still the human ear is very sensitive to difference in tone distortion; its level depends on the stylus condition and record wear. To maintain optimal sound reproduction and to minimize wear on your records as well as on your stylus, we recommend the following procedure before and after each playback: • Remove dust carefully from record surfaces by using a fine antistatic brush or cloth before every use. • Please remember to remove dust from the diamond tip before and after playback of each record • I order to keep electrical contacts clean and to lubricate the knurled nut on the tonearm, Ortofon recommends occasionally a light spray of contact cleaner like DeoxIT ®Gold G-Series into the tonearm socket. It should be noted that some phono equalizers may generate some tone distortion, which cannot be referred to the cartridge.

Standard felt mats have poor anti-static characteristics, which attracts dust to your precious vinyl. They are often too thin for effective acoustic control of platters, especially those made from metal. On the other hand, thick rubber mats can Isolate the record from your turntable too much. This makes the record vulnerable to static build-up, and can result in noise and clicks during playback. As the name suggests, Cork & Rubber-it uses a carefully blended mix of cork and rubber to offer the ultimate acoustic control of rubber alongside the anti-static properties of cork. Cork & Rubber it is available in 1mm or 3mm thicknesses, to suit all turntables. The two thickness options allow you to choose what’s best for your turntable, and cater for your personal listening tastes at the same time. Recommendation: Try the thick mat on thin metal platters and the thin one on dense or heavy platters! Features Avoids static load Less noise Fits all turntables Available in two different thickness options (3 mm & 1 mm) Technical Specifications Material cork & rubber Diameter 300 mm Thickness 1 mm or 3 mm Colour brown

From the mid-1990s, just a few years after the founding of Pro-Ject Audio Systems and precisely at the height of the popularity of the CD format, we noticed a growing number of audiophiles nostalgically maintaining the tradition of analog listening. In 1998, Heinz Lichtenegger and his UK distributor and long-time friend Laurence Armstrong sat together and dreamed of a rebirth of the turntable that would make analog sound accessible to a wider audience. They wanted to offer new models that could offer sound with maximum quality approaching the parameters of high-end devices, but at a price that the new younger generation will be able to afford. This is how the DEBUT record player was born. Today, more than 20 years after its launch, the Debut, with nearly a million units sold, is truly one of the best-selling products in Hi-Fi history. Now in 2020 the time has come again for a new evolution of the legendary model. EVOLUTION The debut Carbon EVO focuses on the key aspects that make a turntable sound great. Technically flawless design - perfect workmanship - handmade in the EU. In short, this turntable is built to last a lifetime! PLATE WITH INTERNAL TPE DAMPING Our new TPE (Thermoplastic Elastomer) damping technology helps to dampen resonances very effectively, and also increases the weight of the cymbal to 1.7 kg. Because the TPE damping is installed on the inside of the edge of the plate, the kinetic energy creates a flywheel effect. The result is a much quieter and more stable operation with significantly lower values ​​of speed fluctuations. PERFECTLY BALANCED FOR ALL CIRCUMSTANCES The Debut Carbon EVO uses 3 height-adjustable heavy metal bases that ensure even placement of the turntable on any surface. By using only 3 bases, we increase the stability on uneven surfaces, because for a truly top-quality sound it is necessary to have the turntable perfectly level. IMPROVED ENGINE SUSPENSION SYSTEM The Debut Carbon EVO features a newly designed engine suspension. The turntable motor always vibrates during operation, which is a natural feature. Because the pickup and tip are very sensitive parts that transmit vibrations to the speakers, unwanted motor vibrations can manifest as audible mechanical noise. Therefore, it is very important to consistently separate the engine from the chassis. Advanced sandwich technology of several layers of TPE damping combined with high weight is our new solution for effective engine suspension in the Debut Carbon EVO model . SPEED CONTROL Based on customer feedback, we have integrated electronic speed control in the Debut Carbon EVO because 9" and high-quality 45 rpm records are becoming more and more popular and common due to their excellent sound quality. In addition to being able to easily change the playback speed at the push of a button, the speed of the turntable is electronically controlled with maximum precision, resulting in the most accurate and stable playback. Thanks to the included 78 RPM round belt, you can listen to your shellac record collection at any time. Just replace the pickup tip with an Ortofon 2M 78 (not included), install the round strap and you are ready to enjoy an extraordinary musical experience. The speed control switch has been moved to the bottom of the chassis to maintain the clean look that is appreciated on the Debut. You will not find any button, switch or print on the visible parts of the chassis so as not to disturb the luxurious design and aesthetics . SHOULDER The Debut Carbon EVO is fitted with a proven 8.6'' one-piece carbon fiber arm. In combination with the premium Ortofon 2M-Red pickup, this light and at the same time very stiff arm delivers unprecedented sound quality with a convincing three-dimensional scene. CONNECTION The Debut Carbon EVO turntable is equipped with a high-quality Connect it E phono cable. This is a low-capacity cable with excellent shielding and semi-symmetrical geometry. Compared to other digital and analog music sources, the signal coming from the portable turntable is very sensitive. Cheap RCA cables are often not able to provide the ideal requirements for a clean signal transfer from the turntable to the amplifier. PACKAGING The Debut Carbon EVO comes with an adjustable acrylic dust cover. The delivery also includes an adapter for 7'' singles, a Connect it E RCA turntable cable and, in addition to the standard drive belt, a round belt for playing records at 78 rpm . ADVANTAGES The Carbon EVO debut is timeless in that it offers traditional high-gloss black, white and red lacquers or a beautiful natural walnut veneer. Completely new, original and defining trends are also realized in a satin finish in 5 different color variants. New plate, engine suspension, speed control and height adjustable feet are small details. If they are not perceived individually, but as a whole, they add up and the result is the new Debut EVO. We believe we've set a new benchmark and our new Debut EVO not only sounds better than before, but also looks more impressive and luxurious than any Debut we've made in the past . Replacement Stylus Ortofon 2M Red Stylus Pre-Fitted Cartridge Ortofon 2M Red Nominal Speeds 33 / 45 / 78 RPM (Electronic, except 78 RPM) Drive Principle Belt Drive Platter 300mm Steel Platter with TPE Damping (incl. Felt Mat) Main Bearing Stainless Steel with Bronze Bushing Wow & Flutter 33 = 0.17 / 45 = 0.15 Speed Drift 33 = 0.50 / 45 = 0.60 Signal to Noise -68dB Tonearm 8.6" Carbon Fibre Effective Arm Length 218.5mm Effective Arm Mass 6.0g Overhang 18.5mm Power Supply 15V DC / 0.8A Detachable Power Supply Power Consumption 4W Max. Dimensions (W x H x D) 415 x 113 x 320mm (Lid Closed) Weight 6.0kg net

A2 TECHNOLOGY The A2 continues the success of our fully mechanical automatic turntables. With the A2, you can now select the drop off point for 7“ (singles) or 12“ (LPs) for 45 RPM records. We have also added 78 RPM to the system allowing you to dig back into old shellac collections. To enjoy listening to your A2, just press start and the tonearm automatically moves to the lead in groove of the record. Once playing, the automatics are completely taken out of the equation. And because the automatics are working entirely mechanically – no additional electronics needed – they truly do not influence or degrade sound quality during playback! At the end of the record, the tonearm is automatically brought back and gently lowered into its resting position and the motor shut off. Why sub-chassis? Automatic turntables have many small mechanical parts, which means you need more hollow space in the chassis to fit them. Hollow spaces are the biggest problem as they always reinforce resonances. By using a sub-chassis, you decouple the tonearm and drive from the chassis. In other words, a sub-chassis is a MUST for automatic turntables and enables them to reach excellent sound performance. Floating sub-chassis The A2 employs a sub-chassis construction, where the tonearm, platter bearing and motor are mounted onto a separate floating sub-chassis. This isolates all the most critical turntable elements further and adds an extra layer of protection against outside noise, resonances and interference. This has especially big advantages, when your loudspeakers are very close to the turntable. Pro-Ject Design Philosophy Adding Pro-Ject designs and ideas, we have spent a lot of time on the A2‘s clean design language. You will see similarities to iconic designs of the German audio industry. Today, we believe that this minimalistic approach is very much modern again. IMPROVED AUTOMATIC MECHANISM We have invested in a new aluminium diecast top for the whole sub-chassis and automatic mechanism. We have tried to avoid plastic parts from the original German automatic design as much as possible. This is the first time in all the 50 years of its existance that the original automatic design has received an improvement like this. Due to the new aluminium diecast cover and the massive chassis, the whole sub-chassis construction is more effective and isolates unwanted resonance much better. MASSLESS TRACKING FORCE ADJUSTMENT The A2 uses a new system for setting the tracking force. As usual, you first level out the tonearm with the damped counterweight. Damping the counter- weight makes the tonearm as a whole more robust and decouples the counterweight from the tonearm reducing resonant frequencies. Afterwards the tracking force is set by turning a dial directly on the tonearm bearing. Not only is this system very fast, precise and efficient, it also keeps the center of gravity directly on top of the bearing center. The spring based anti-skating can also be adjusted directly on the tonearm base. IMPROVED TONEARM & CARDANIC BEARING The A2 features an 8.3” ultra-light-mass aluminium tonearm with an improved tonearm tube with bigger diameter. The is a perfect match for the slightly heavier Ortofon 2M Red. In combination we retain the super fast response and all transient detail with lots of fine microdynamics, while the new 2M Red adds a lot of body and musical warmth. The tonearm bearing has received a major upgrade, is now made out of aluminium and features a 4-pin-point cardanic construction with steel tip ball bearings from our own production. This allows for unhindered and free tonearm movement with the lowest amount of friction possible. The A2 will track your vinyl records with the utmost of precision and tightness. WHY ULTRA-LIGHT-MASS TONEARM? Since forever, there has been this technical discussion about light-weight tonearms with high compliance MM cartridges vs. heavy tonearms with low compliance MC cartridges. Both approaches have advantages and disadvantages and you‘ll find detailed analysis in concerned literature. However, when it comes to automatic turntables, we NEED ultra-light-mass tonearms. There is no way around it. We need the automatic mechanics to be like those in mechanical watches: small and precise. A heavy tonearm would result in a rougher mechanical design as much higher masses have to be moved. Therefore, the A2 reaches performance hights like no other automatic turntable on the market. Audiophile Features Ortofon 2M Red Moving-Magnet Cartridge 2M Red is an all-purpose cartridge that delivers open, dynamic sound with a slight touch of warmth. (*US Version comes with Sumiko Rainier) New Headshell Carbon fibre reinforced anti-magnetic headshell The headshell is made of carbon fibre reinforced polymer which makes it super stable and rigid, all while keeping the weight at a lowest to work perfectly with the ultra-light-mass tonearm design. Heavy MDF main chassis Heavy and avoids hollow spaces The new heavy MDF main chassis is made and designed in Austria and carefully hand painted in a luxurious 8-layer matt black finish. It provides a very sturdy base for the sub-chassis and reduces hollow spaces to avoid resonances. Such a massive chassis is very unusual in this price range and the base for natural sound. Floating sub-chassis With aluminium diecast top Isolating all the most critical turntable elements adds an extra layer of protection against outside noise. A must for automatic turntables. Damped Platter Precision balanced aluminium The damping ring on the inside adds weight and reduces resonances. In the last step the platter is turned and precision balanced to receive its fine edges and lowest wow and flutter deviations. Connect it E Semi-balanced RCA cable To guarantee a perfect connection to your amp we use a high-quality phono RCA cable. Our Connect it E is a semi-balanced, low-capacitance cable, with superior shielding. 33/45/78 RPM Ready for singles, LPs & shellacs No need to change the belt position. Easily change speed with the push of only a single button & listen to your favourite LP, single or shellac. Automat Line Handmade in Germany The A2 is fully handmade in Germany and looks back on decades of experience. Paired with Pro-Ject technology, it sets new standards in automatic turntable design. Speed: 33, 45, 78 (electronic speed change) Drive principle: belt drive, fully automatic Platter: damped aluminium platter Wow & flutter: 33: +/-0,14%; 45: +/-0,12% Speed drift: 33: +/-0,27%; 45: +/-0,22% Signal to noise: 74dB Tonearm: ultra-light-mass 8,3” aluminium tonearm Effective arm length: 211mm Overhang: 19,5mm Included accessories: 15V DC / 0,8A power supply, dust cover, 7‘‘ single adapter, feltmat, phono cable Power consumption: 1,5W Dimensions: 430 x 150 x 365 mm (WxHxD) Weight: 7,3 kg net / 10 kg with packaging

Use the brush in the forward direction from the rear of the cartridge towards the stylus tip and never from stylus tip to the rear of the cartridge and never from side to side. Following this treatment there will normally be no need for further stylus cleaning.

Replacing the multi award winning What Hi-Fi? Product of the Year (RP3) was never going to be an easy task. It took our team of designers headed up by Rega’s Roy Gandy, two years to develop the all new ‘Planar 3’ following the biggest re-design of the iconic ‘Three’ model ever seen. The ‘Planar 3’ is a completely new turntable carrying over just two components from the previous RP model. PL3_topdown_white_(1)_spw.jpg The iconic Planar 3 Rega has pioneered the use of lightweight rigid plinths. Clever use of lightweight particulate core with a highly rigid phenolic resin skin became the foundations of the high level of performance achieved by the now iconic original Planar range. The new Planar 3 takes this design philosophy to the next level. A lightweight acrylic laminated plinth strengthened using a new improved double brace system mounted specifically where the increased rigidity is required (between the tonearm mounting and the main hub bearing) which forms a structurally sound “stressed beam” assembly. This rigid plinth design prevents energy absorption and unwanted resonance, which will add unnatural distortions to the music. Equally, heavier mass can transfer more unwanted energy, such as motor or bearing noise directly into the rotating record. The use of braces instead of the complete skin allows double thickness phenolic resin in these key areas while providing further weight reduction to the plinth which directly addresses the issue of mass absorption and unwanted energy transmission. KEY FEATURES What Hi-Fi? Product of the year 2016, 2017, 2018, 2019, 2020, 2021 RB330 precision tonearm Rega Elys 2 MM cartridge factory fitted (optional) Rega Exact MM cartridge factory fitted (optional) Double brace technology 24 V low noise, low vibration motor 12 mm float glass opti-white polished platter Supplied with clear dust cover as standard. Compatible with Rega Neo turntable power supply (sold separately) Advanced EBLT drive belt fitted as standard from March 2021 RB330 The RB330 tonearm was designed using the latest 3D CAD & CAM technology, and is the culmination of more than 35 years of tonearm design experience. Featuring a brand new bearing housing, and our latest tonearm tube designed using intelligent redistribution of mass ensure this arm will exhibit fewer points of possible resonance. Extreme stability with almost friction free movement from the new high precision bearing assemblies guarantees to gather more information from your vinyl than ever before. PLINTH High gloss acrylic, laminated plinth, stiffer and vastly improved appearance, ergonomically positioned power switch. Available in three stunning high gloss finishes, black, white and red and new for 2024 Light oak effect. DOUBLE BRACE TECHNOLOGY Improved thicker 3 mm phenolic bottom brace and new metalised skin phenolic top brace. BEARING HOUSING Re-designed brass main hub central bearing, improved fit and construction reducing stress on the bearing itself. ISOLATION New improved foot to increase stability and reduce vibration transfer. 24 V MOTOR Improved new motor control PCB with integration for the addition of Neo PSU for electronic speed change and improved advanced anti-vibration circuit (sold separately). New motor cover tray with integrated cooling. DUST COVER Supplied as standard / optional lid - plinth protectors - supplied to prevent marks on the plinth and keep it looking its best. SIMPLE SET-UP Easy to use multi-lingual quick start guide for easy set up SUB PLATTER Re-designed sub platter, improved accuracy and improved stiffness. PLATTER New float glass ‘Optiwhite’ polished edge 12 mm – Improved accuracy in manufacture and stunning looks. Tonearm Hand assembled precision RB330 tonearm Motor 24 V low noise motor Platter 12 mm glass polished edge Connectivity RCA / Phono Power (additional) Mini DIN ​for connection to Neo PSU (optional upgrade) Dimensions (lid closed) (W x H x D) 447 x 117 x 360 mm Weight 6.0 kg

Suitable for the following turntables: Planar 1 Planar 2 Planar 78

The Planar 6 is constructed around a unique ultra-light foam core plinth and HPL laminates. It is designed to deliver a level of performance beyond anything at this price. The Planar 6 features the RB330 tonearm and a dual-layer float glass platter. The supplied Neo turntable power supply provides convenient speed selection, advanced anti-vibration control, and electronic fine speed adjustment. Please note: The Planar 6 will now ship with new look NEO MK2 power supply as standard. Ultra-Light The Planar 6 is built around the huge success of the RP8 and RP10 turntables. It is the first new Rega turntable to be constructed with an ultra-lightweight Tancast 8 polyurethane foam core plinth (a material developed for the aerospace industry). This material is sandwiched between a new HPL (high pressure laminate). HPL is exceptionally thin whilst extremely rigid and is presented in a stunning Polaris matt grey finished with high gloss polymer black edge trim. The Planar 6 now benefits from a single piece, machined aluminium sub-platter, a new 24 V motor hand tuned and matched to its own Neo power supply and custom drive pulley fitted with our upgrade drive belt as standard. KEY FEATURES RB330 tonearm with stainless balance weight Exact (MM), Ania (MC) or Ania Pro (MC) cartridge factory fitted (optional) Dual layer float glass platter Double brace technology Tancast 8 foamcore plinth Custom matched Neo PSU EBLT Reference drive belt fitted as standard RB330 The RB330 tonearm was designed using the latest 3D CAD & CAM technology, and is the culmination of more than 35 years of tonearm design experience. Featuring a brand new bearing housing, and our latest tonearm tube designed using intelligent redistribution of mass ensure this arm will exhibit fewer points of possible resonance. Extreme stability with almost friction free movement from the new high precision bearing assemblies guarantees to gather more information from your vinyl than ever before. PLINTH Super lightweight foam core plinth. Plinth laminate: New Polaris HPL (high pressure laminate). Non-marking matt finish scratch resistant high rigidity skin. Available in one finish ‘Polaris Grey’ matt finish with high gloss black polymer edge trim. DOUBLE BRACE TECHNOLOGY Rega’s double brace technology, with integral custom matched aluminium tonearm and hub pillars to ensure maximum rigidity and accuracy. CUSTOM MATCHED NEO TTPSU AND 24 V MOTOR New high spec Rega 24 V low noise synchronous motor – each motor matched by hand to its own Neo PSU ensuring optimum anti-vibration control. Tonearm Hand assembled precision RB330 tonearm Motor 24 V low noise motor Platter Dual layer smoked / clear glass platter Connectivity RCA / Phono Power Mini DIN for connection to supplied Neo PSU Planar 6 Turntable Dimensions (lid closed) (W x H x D) 447 x 120 x 360 mm Neo PSU Dimensions (W x H x D) 180 x 50 x 155 mm Weight 5.2 kg

The Cartridge Alignment Tool standard version has been updated with user convenience in mind. Its straightforward design ensures an easy alignment process, making it accessible for both newcomers and seasoned enthusiasts. With two zero points Baerwald alignment, this tool guarantees optimal tracking performance, allowing you to enjoy the full richness of your vinyl collection with accuracy and clarity. For superior cartridge performance How to use the alignment tool To ensure optimal performance of your turntable cartridge, it's important to learn how to effectively utilize our alignment tool. Mounting the cartridge is crucial for consistent playback quality across your records from the outer to the inner grooves. Proper alignment is necessary for maintaining even playback quality, and our alignment tool makes this process simple. You can achieve precise alignment effortlessly by following these clear instructions. https://ortofon.com/pages/alignment-tool

Izuzetno jednostavan za upotrebu, omogućiće i vašoj deci da puste ploču – uz vrhunski zvuk, visokog kvaliteta. Lenco L-85 opremljen je ugrađenim pretpojačalom, ručicom sa mehaničkim podizanjem i MMC iglom. Reprodukcija vinila u dve standardne brzine, na 33.3 i 45 obrtaja u minutu. Uklonjivi plastični poklopac štiti gramofon od prašine. Vašu kolekciju starih vinila možete digitalizovati pomoću L-85, jednostavnim povezivanjem na računar pomoću USB priključka, i tako zvuk omiljenih ploča učiniti mobilnim, i poneti ga sa sobom. GARANCIJA 24 meseca VISINA 12 cm ŠIRINA 42 cm DUBINA 36.20 cm MATERIJAL Metal, plastika VREME PRELASKA NA ERP STATE 10 min SIGNAL ZVUKA Stereo 2.0 IZVORI AUDIO / VIDEO / PODATAKA LP & singl ploče PODRŽANI AUDIO FORMATI MP3 IZLAZ ZA POVEZIVANJE RCA OUT MP3 Da, direktno preko USB-a ANTI SKATING Ne GRAMOFON SA ZVUČNICIMA Ne PRETPOJAČALO Da TIP POGONA Kaiš/remen (belt drive) TIP PICK-UP SISTEMA Pokretni magnet (MMC) UKLJUČENA GRAMOFONSKA OPREMA 45 RPM (7”) adapter, AT3600, AC adapter, krpica za čišćenje, poklopac protiv prašine, slip mat, RCA kabl Materijal podloge (tanjira) Plastika GRAMOFON SA BLUETOOTH-om Ne TOUCHSCREEN Ne BRZINA/BROJ OBRTAJA 33, 45 PODRŽANI TIPOVI PLOČA 7”, 10”, 12” PODESIVI PRITISAK IGLE Da AUTOSTOP Da AUTORETURN Da “PITCH” kontrola Ne MEHANIČKA RUČICA Da TEŽINA PROIZVODA (KG) 2.61 kg Ulazna snaga 100-240 V Frekvencija 50-60 Hz MAINS ADAPTER OUTPUT VOLTAGE 12 V MAINS ADAPTER OUTPUT CURRENT 1000 A MAINS ADAPTER OUTPUT POWER 12 W TEŽINA PROIZVODA (KG) 2.61 kg

Low Mass Pocan® Body The 1000 series uses a strong one piece body which holds the fixed parts securely in place. Made from a special type of ultra-rigid, glass reinforced polyester called Pocan, the body can be tightly bolted to the head shell for maximum efficiency and optimum sound quality. The user replaceable stylus carrier slots tightly into the body with a locating pin preventing unwanted vibrations which would otherwise colour the sound. An integral mu-metal can keeps the generator parts shielded from hum-inducing stray magnetic fields. Because Pocan has a high strength-to-mass ratio, the overall mass of the G1000 series cartridges is kept below 6.5 g. Low mass and moderate compliance keep the natural arm/cartridge resonance within safe limits for easy matching to a wide range of tonearms. High Efficiency Magnetic Circuit Finely etched mu-metal is laminated to form the pole pieces around which are fitted two formerless coils of four thousand turns each. This unique design reduces mass and also makes for a very efficient magnetic circuit producing a higher than average output. This construction also reduces the loss at high frequencies inherent in conventional designs, making for a smooth and extended frequency response. Reduced Moving Mass The 1000 series uses a unique ultra-low-mass, micro-miniature Alnico V magnet made to a tolerance that can be achieved by no other manufacturer worldwide. Welded to the magnet is a gold plated nickel tie-bar which provides an earth path for vinyl static charge build up and stabilses the cantilever in unwanted vibrational modes. The whole ultra-low-mass assembly is then mounted in a special butyl rubber polymer with optimised damping characteristics. Expert Adjustment The correct setting of stylus azimuth (or horizontal tracking angle) is essential for the maintenance of a proper stereo sound stage. Azimuth is the term used to describe the angle that the vertical centre-line of the stylus makes with the record surface and this must be exactly perpendicular to the record groove. This is not usually a user adjustable parameter on most budget decks and so it is vital that the cartridge leaves the factory with the azimuth precisely set. Badly adjusted azimuth can cause uneven channel balance and increased crosstalk between channels which would severely degrade the stereo image. Frequency Response20 Hz -20 kHz ±3 dB Channel Balance within 2 dB @ 1 kHz Channel Separationbetter than 25 dB @ 1 kHz Sensitivity6.5 mV ±1.5 dB, 1 kHz @ 5 cm/sec Static Compliance24 mm/N (lat); 16 mm/N (vert) Equivalent tip mass0.45 mg Vertical Tracking Angle24° Stylus RadiusElliptical Stylus TypeReplaceable Load Resistance47 kΩ Load Capacitance150-200 pF Internal Inductance570 mH Internal Resistance660 Ω Cartridge Mass6.3 g Cartridge Mass (inc. fixings)7.6 g Fixing Centre0.5" (12.7 mm) Playing Weight1.5 - 2.0 g (1.7 g nom.) Replacement Stylus1006 - D0

The use of a felt mat helps ensure a smooth rotation of the record on the turntable platter. Often called a slip mat, their design is simply to sit under the record and on top of the platter. These colourful replacement felt mats can be used on the 10-inch platter used on Pro-Ject Debut turntable models (excluding the Debut S/E3) as well as almost any turntable.

Why Record Player MG-1 MkII Magic Groove? A perfect match for Vertere’s SG-1 Mkll Tonearm, superbly built and a delight to use Plays music with the intended emotion and real dynamics in a home environment Provides an ideal platform for upgrading tonearm, cable and cartridge Vertere MG-1 Magic Groove Record Player Vertere’s Record Player MG-1 Magic Groove has many critical aspects of its design based on the Vertere SG-1 high performance record player. This has enabled the MG-1 to provide vinyl replay beyond what is possible from its class. Record Player MG-1 will realise the potential of any high quality audio system. The MG-1 precision main bearing and platter assembly, belt-driven by the SG-1 motor system, ensures smoothest running and provides a stable platform for the tonearm and cartridge. This combination provides an exceptionally wide dynamic range with ‘dark’ background that is only bettered by RG-1 or SG-1 record players. With its plinth structure and isolation system based on the SG-1, Record Player MG-1 is designed to be maintenance and setup-free. And the MG-1 with matching SG-1 tonearm and Motor Drive is a delight to use. Even in its standard form, with D-Fi tonearm cable and motor drive cable, the MG-1 provides a performance that is only bettered by the SG-1. However, the upgradability that is built into this class-leading record player elevates its performance, step by step, closer to the SG-1. Upgrade the tonearm and motor drive cables from D-Fi to Pulse-B, to Pulse-R and all the way to Pulse-HB, to realise the true potential of the MG-1. Every step will provide an unparalleled musical experience and enjoyment that is only achievable from a Vertere record player. Stylish and beautifully crafted with attention to the finest details, this record player is a must-have, and one that lovers of music on vinyl will cherish. Technical Specifications Type Belt drive Motor 24 Pole Synchronous Spindle Support Acetal Ball Bearing Motor Mount Acetal Mount & Bearing – Two Articulated Ball Race Bearings with 3-point Adjustable Pulley Super Precision Aluminium Alloy Drive Belt Precision Ground Polymer Platter MG-1 Single Piece Super Precision Aluminium Alloy 3mm Bonded Acrylic Record Interface Bearing Spindle MG-1 Precision Hardened Stainless Steel Roundness / Concentricity and Finish < 2 Micron Bearing Spindle MG-1 Precision Hardened Stainless Steel Roundness / Concentricity and Finish < 2 Micron Bearing Housing MG-1 High Copper Content Phosphor Bronze Clearance < 6.0 Microns Plinth Structure 20mm Clear Cast Acrylic with optional finishes Special Metallic Black or Metallic Pearlescent White and Metallic Champagne With switchable internal illumination Isolation System 2 Stage Compliant and 1 Stage Rigid 9 De-coupler Sets and Aluminium Alloy/SS Feet & Felt Motor Drive P/S Precision Crystal Referenced 33.3 and 45 rpm (<0.4%) Wow and Flutter <0.1% Rumble <-85dB Dimensions (W x D x H) 468 x 384 x 140-155mm Weight 14 Kg

Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM Balanced straight tone arm with hydraulically damped lift control and rest Built-in switchable phono/line pre-amplifier with attached dual RCA output cable Switchable pre-amp modes for moving magnet and moving coil cartridges ½" mount universal headshell with AT91R Dual Moving Magnet phono cartridge and long-life diamond stylus Anti-resonance, die-cast aluminum platter with 4 mm thick rubber mat Damped base construction for reduced low-frequency feedback coloration Includes 45 RPM adapter and removable hinged dust cover Available in black (AT-LP3BK) and white (AT-LP3WH) Type: Belt-drive turntable, fully automatic Motor: DC servo-controlled Speeds: 33-1/3 RPM, 45 RPM Turntable Platter: Die-cast aluminum Wow and Flutter: Less than 0.25% (WTD) @ 3 kHz (JIS)

Cleaning a record collection can be tiresome. There are many ways to de-dust your precious collection. All of them have one thing in common, you have to clean the records while they are put at rest. Sweep it E goes the other way. You can enjoy listening to your records while they are being cleaned. Simply place Sweep it E on your turntable and make sure that the brush is placed before the needle. This way the grooves will get clean right before the cartridge can pick up sound from it. Sweep it E is made out of durable and resistant aluminium to make sure it lasts a long cleaning-life. With the heavy weight base it stands firmly on your turntable. The uni-pivot arm follows the grooves of your record and cleans them effectively. When you don‘t need Sweep it E you can simply put the arm on its dedicated arm-rest for a comfortable placement. The soft hair-brush guarantees that the records won‘t be harmed during the cleaning process. Features Gently cleans your vinyl while playing Follows the grooves Heavy weight base for secure placement Uni-pivot design Easy setup Suitable for Primary, Essential and Debut turntables Elegant looks Durable materials Brush made of natural hair Weight 430 g Arm-length 226 mm Base diameter 46 mm Arm material Aluminium Brush Hair Colours Black, silver

Automatizovan gramofon koji pušta ploče na jedan dodir dugmeta, i završava plejbek na kraju svake strane – automatskim podizanjem i vraćanjem ručice u početni položaj. Manuelni podizač ručice. U DP 300F je i Phono pretpojačalo, sa integrisanim Phono ekvilajzerom (RIAA), tako da se može priključiti na pojačala bez Phono sekcije – preko regularnog Line ulaza. Sofisticiran, jednostavan dizajn dolazi odenut u boju visokog sjaja. Boja: Srebrna; Materijal izrade osnove/okvira: Aluminijum izliven pod pritiskom Sistem prenosa: Remen (kaiš, gumeni) Brzina reprodukcije (broj obrtaja): 33.3 & 45 (RPM) Ručka: statički balansirana, ravna, efektivne dužine 221.5 mm; Prebačaj: 19 mm; Podesivi pritisak igle/zvučnice: 0 do 4.0 g; Težina podobnih kertridža: od 4.5 do 9.5 g (bez glave) Tip igle/zvučnice: MM (pokretni magnet), DSN-85mm, odgovarajući pritisak: 2.0 g, Težina kertridža: 5 g, Masa glave (namontirane): 10 g Frekvencijski opseg: 20 Hz - 20 kHz; Izlazni kapacitet (kertridža): 2.5 mV / 1 kHz Izlazni Phono EQ: 150 mV / 1 kHz; Wow & flutter: 0.10 % (WRMS) Napajanje: AC 100 V 50/60 Hz, Potrošnja el. energije: 2 W Dimenzije: 434 x 122 x 381 mm (sa nožicama), Težina: 5.5 kg

Legendarna RB330 ručka Fino podešavanje Ekstremni nivoi postignute stabilnosti, zajedno sa kretanjem gotovo bez trenja iz visoko preciznih ručno usklađenih sklopova ležaja garantuju prikupljanje više informacija sa vašeg vinila nego ikada ranije. Takođe ćete pronaći nove Rega fono kablove niske kapacitativnosti, koji se završavaju fono utikačima visoke specifikacije. Rega je poznata po dizajnu gramofonskih ručki. Jedinstvena karakteristika ovog dizajna je postizanje horizontalnog i vertikalnog kretanja gotovo bez trenja, dok nema merljivog slobodnog hoda u sklopovima ležaja. Proizveden je potpuno nov, precizno dizajniran vertikalni sklop ležaja male mase kako bi dodatno upotpunio inherentnu filozofiju dizajna Planar 8 gramofona. RB880 koristi najnoviju Rega cev ručke, potpuno redizajniranu za redistribuciju mase i dalje smanjenje naprezanja i rezonancija. Ova cev naprednog dizajna povećava krutost i rigidnost kompletnog sklopa koristeći CAD dizajn. Rega dizajniran fono kabl niske kapacitativnosti je ugrađen eksterno. Koristi napredni sklop fono utikača. Ovo ima samo dva dela za minimiziranje spojeva i uključuje twist & clamp dizajn koji zaključava utikač na terminal. Dizajn povećava konektivnost i osigurava da se signalna putanja održava što čistijom. GLAVNE KARAKTERISTIKE Redizajnirano aluminijumsko vertikalno kućište ležaja Redizajnirani uložak Integrisana kopča za ručku Poboljšano kućište opruge Rega nagrađivana low-mass aluminijska cev ručke Ekstremna stabilnost i kretanje gotovo bez trenja Ručno odabrani ležajevi SPECIFIKACIJE Efektivna masa: niska / 11 g Distanca pri montiranju (od centra tanjira do centra otvora za ručku): 222 mm Efektivna dužina: 236.5 mm Offset ugao: 21.55° Prepust: 14.5 mm

This new record puck ensures a secure fit between record and turntable. With the two different finishes, black painted and polished silver, it perfectly fits the design of of our turntables. Record pucks use weight to secure a playing vinyl record against the turntable platter. By holding the two together, the sound performance of the turntable will improve, in timing and depth of sound. With a weight of 190 grams, this puck is perfect for smaller turntables in order not to burden the turntable bearing and to prevent an increase in rumbling. Check the spindle height: The spindle height with applied record shall not exceed 10,5mm! Features Ensures a firm fit of the record Reduces unwanted vibrations Optimizes playback of warped records Felt mat on the underside to protect the label Sound improvement for all turntables Material: Aluminium (black) Weight: 190g Diameter: 78mm Height: 16mm

Automatizovan gramofon koji pušta ploče na jedan dodir dugmeta, i završava plejbek na kraju svake strane – automatskim podizanjem i vraćanjem ručice u početni položaj. Manuelni podizač ručice. U DP 300F je i Phono pretpojačalo, sa integrisanim Phono ekvilajzerom (RIAA), tako da se može priključiti na pojačala bez Phono sekcije – preko regularnog Line ulaza. Sofisticiran, jednostavan dizajn dolazi odenut u boju visokog sjaja. Boja: Crna; Materijal izrade osnove/okvira: Aluminijum izliven pod pritiskom Sistem prenosa: Remen (kaiš, gumeni) Brzina reprodukcije (broj obrtaja): 33.3 & 45 (RPM) Ručka: statički balansirana, ravna, efektivne dužine 221.5 mm; Prebačaj: 19 mm; Podesivi pritisak igle/zvučnice: 0 do 4.0 g; Težina podobnih kertridža: od 4.5 do 9.5 g (bez glave) Tip igle/zvučnice: MM (pokretni magnet), DSN-85mm, odgovarajući pritisak: 2.0 g, Težina kertridža: 5 g, Masa glave (namontirane): 10 g Frekvencijski opseg: 20 Hz - 20 kHz; Izlazni kapacitet (kertridža): 2.5 mV / 1 kHz Izlazni Phono EQ: 150 mV / 1 kHz; Wow & flutter: 0.10 % (WRMS) Napajanje: AC 100 V 50/60 Hz, Potrošnja el. energije: 2 W Dimenzije: 434 x 122 x 381 mm (sa nožicama), Težina: 5.5 kg

Za veću jačinu zvuka povežite spoljne zvučnike preko RCA priključka na zadnjoj strani gramofona. LS-10 takođe ima izlaz za slušalice, tako da možete slušati svoje ploče bez ometanja bilo koga drugog. LS-10 dolazi sa odvojivim poklopcem za prašinu koji štiti gramofon od prljanja. Uređaj možete lako održavati čistim pomoću meke i suve krpe. Udahnite novi život vašim starim vinilima! GARANCIJA 24 meseca VISINA 10.5 cm ŠIRINA 32.8 cm DUBINA 31.5 cm BOJA Crna MATERIJAL Plastika, drvo VREME PRELASKA NA ERP STATE 15 min SIGNAL ZVUKA / broj audio kanala Stereo 2.0 IZVORI AUDIO / VIDEO / PODATAKA LP & singl ploče A/V izlazi RCA Out, 3.5mm-ski izlaz za slušalice MP3 prenos Ne ANTI SKATING Ne GRAMOFON SA ZVUČNICIMA Da (ugrađenim) PRETPOJAČALO Da TIP POGONA Remenski (kaiš) TIP PICK-UP SISTEMA Keramički UKLJUČENA GRAMOFONSKA OPREMA 45 RPM (7”) adapter, AC adapter, krpica za čišćenje, poklopac protiv prašine, slip mat MATERIJAL tanjira Plastika Bluetooth Ne BRZINA/BROJ OBRTAJA 33, 45 PODRŽANI TIPOVI PLOČA 7”, 10”, 12” PODESIVI PRITISAK IGLE Ne AUTOSTOP Da AUTORETURN Ne “PITCH” kontrola Ne Mehaničko podizanje ručice Da TEŽINA PROIZVODA (KG) 2.29 kg Ulazna snaga 100-240 V Frekvencija 50-60 Hz MAINS ADAPTER OUTPUT VOLTAGE 5 V MAINS ADAPTER OUTPUT CURRENT 1 A MAINS ADAPTER OUTPUT POWER 5 W MAX. izlazna snaga 2 x 3 W

Napravljen za maksimalnu preciznost Svaki Exact kertridž koristi par paralelnih Rega kalema najviše klase. Odabrani set kalema pažljivo je sastavljen u specijalnom šablonu kako bi se stvorio najuži mogući razmak između polova pokretnih magneta. Postizanjem neverovatno finog balansa kanala od ±0,1 mV Exact isporučuje najbolju stereo sliku i najbolji izlaz dostupan kod Rega magneta. Ovaj proces testiranja može potrajati tri puta duže od ostalih modela magneta, ali povećana preciznost je vredna truda jer ćete osetiti potentniji bas i oštrije visoke tonove. Dodatak jedinstvenog Rega sistema za montažu u tri tačke (koji automatski postavlja prepust i poboljšava krutost montaže na nosač glave Rega ručke) je ono što Exact čini vrhunskim Rega MM kertridžom. GLAVNE KARAKTERISTIKE Ručno rađeni stereo kertridž Rega 3 tačke fiksiranja “Vital” dijamantski profil Aluminijumski nosač igle Vrhunski ručno podešen fini balans kanala za optimalnu stereo sliku Fini balans kanala: ±0,1 mV Doživotna garancija na proizvodne greške REGA REKONSTRUKCIJSKA SHEMA Jedinstveni dizajn pivota Rega kertridža poboljšava performanse eliminacijom mehaničkog spoja između kućišta igle i glavnog tela. Ovo značajno poboljšava efikasnost trekinga i stabilnost igle. Ako se Rega kertridž ošteti ili istroši, jednostavno ga vratite svom Rega distributeru i on će vam isporučiti rekonstruisan kertridž opremljen novim nosačem igle, iglom i pivotom. Svaka rekonstrukcija je u potpunosti testirana tokom dva dana kao što se testira i novi kertridž. Rekonstruisani kertridž se prodaje po sniženoj ceni nakon što ga zamenite svojim istrošenim ili oštećenim kertridžom koji je ekvivalentan zamenskoj igli koju nude drugi proizvođači. TEHNIČKE SPECIFIKACIJE Izlaz: 6,8 - 7,2 mV Igla: “Vital” - kompleksno fino mikro-brušena iz pravougaonog dijamantskog komada Fiksiranje: Rega 3 tačke fiksiranja Kalemi: paralelno namotani kalemi visoke specifikacije Boja: žuta Pritisak igle na površinu vinila: 1,75 g Impedansa: 47 k Kapacitativnost: 100 pF

Visok izlazni napon Sistem jedne tačke vešanja Armaturni sklop male težine Dvoslojna konstrukcija cantilevera SPECIFIKACIJE • Izlazna snaga: 1.6 mV • Igla: specijalni eliptični dijamant • Cantilever: aluminijumski • Frekventni opseg: 20 do 45 kHz • Težina: 4.8 g

Our entry level phono stage has been highly requested by the aspiring and rising audiophile. After the big success of our VT-E BT we decided to create a phono preamplifier that turns any turntable (with moving magnet cartridge) into a modern BT streamer. Phono Box E BT offers two separate inputs, one phono and one line level input, as well as two separate outputs. It can be used as an ordinary MM phono stage that connects to any hifi amplifier via its line level ouput (3.5mm jack) or it can be used as a BT streamer. It takes any provided analogue input signal, converts it and sends digital audio to any BT receiver within a 10m range. Those devices could be either BT headphones, speakers or any other BT receiver. The super-fast pairing is the icing on the cake and makes sure that listening to your LPs will be as painless and quick as possible. The housing is shielded with a metal interior which protects the unit against vibrations and radio frequency interferences, which guarantees an undisturbed listening experience. Phono Box E BT is the perfect companion for all modern audiophiles who want to enjoy their vinyl hobby with the comfort of wireless streaming! Features Wireless BT streaming from line or phono sources 2 Inputs: 1 Phono and 1 Line Input Suitable for MM cartridges Precise RIAA equalisation Use analogue RCA & BT output simultaneously Low noise circuitry Internal metal shielding Gold-plated RCA connectors Outboard power supply included Colour options: black or white Phono input impedance 47 kohms Phono capacitance 100 pF Gain phono 34 dB Inputs 1 Phono (RCA), 1 Line In (3.5 mm) Outputs 1 Line Out (3.5 mm), 1 Bluetooth Noise floor 74 dB THD < 0,02% at 1kHz Phono/Line in max. input voltage 800mV RIAA equalisation curve accuracy within 0.5 dB/20 Hz - 20 kHz BT V2.1, EDR outboard power supply 18 V/500 mA DC, suitable for your country's mains supply Power consumption 200 mA DC Dimensions W x H x D (D with sockets) 120 x 32 x 100 (106) mm Weight 280 g without power supply

The multiple inputs are fully adjustable in real-time. Each input has two separate head-shell / arm settings to allow precise matching for up to six phono cartridges, each being selectable at the touch of a button. In addition to the single-ended RCA (cinch) and fully balanced XLR analogue outputs, a reference quality analogue to digital converter feeds a USB output, allowing broadcast quality archiving to computer hard-drives or other digital media. Real time record monitoring is possible from the USB-connected computer via dedicated RCA (cinch) analogue and SPDIF digital outputs. Agena features a unique ‘Sleep Mode’ which, when selected, enables the unit to switch off its control circuitry, LEDs and display automatically when not required. In this mode, Agena becomes a purely analogue component, with no interference from microprocessors etc. in this way, the analogue signal path is optimised for the very highest performance and signal fidelity. User features include mono, mute and high and low frequency filters. Specification / Features Input Resistance MM: 47 kOhms & 100 kOhms MC: 20, 50, 100, 500, 1000 Ohms Input Capacitance MM: 100 pF MC: 100, 250, 430, 580, 1100,1250, 1430, 1580 pF Input Sensitivity MM: 1.6, 2, 4 mV MC: 135, 145, 177, 200, 320, 400, 800 µV Noise MM: 0.34 µV-A weighted MC: 0.05 µV-A weighted @ max gain RIAA Error: 10 Hz - 100 kHz - 1dB Filters: 15 Hz / 15 kHz Dimensions: 440*320*110mm Carton: 590*450*210mm Mass: 11Kg Downloads Manual Brochure

An external phono preamp is an essential element to be able to listen to vinyls if the amplifier in possession does not have a connection for a turntable or when the integrated phono preamp does not meet the quality requirements that are expected, since prephono generally integrated are never of excellent quality. The well-known Austrian company Pro-Ject offers a huge range of turntables and accessories that soon made it known and appreciated among all fans, and its latest prephono presented fully meets the needs of vinyl lovers, characterized by the usual high price / quality ratio. The Pro-Ject Phono Box S3 B is the new RIAA preamplifier for turntables that can manage both MM and MC cartridges with a series of very versatile adjustments present on the front panel, which thus give the possibility to be adapted in a sensitive way to the needs of your own. pickups, in terms of termination capacity, termination resistance and gain. These settings are also storable which is something very useful as they can be easily recalled based on the cartridge in use, this is because two turntables can be connected to the Phono Box S3. Made with a very elegant chassis in silver finish and very well built with all the adjustments present on the front, while on the rear side there is space for an RCA and mini XLR (balanced) input, an RCA and XLR output that make this device highly versatile and business suit. Also worth mentioning is the possibility of inserting the subsonic filter when required for the reproduction of particular vinyls. Technical specifications: Input Impedance: 10 ohm / 50 ohm / 100 ohm / 1 kOhm / 47 kOhm Input capacity: 50 pF / 150 pF / 300 pF / 400 pF Gain Switch: 40dB / 45dB / 60dB / 65dB (+ 6dB if using XLR output) Subsonic filter: -18 dB per octave at 20 Hz MM Signal to Noise Ratio (40dB): 103dBV, 110dBV α-weighted MC signal-to-noise ratio (60dB): 85dBV, 90dBV α-weighted THD a 1 kHz: <0,001% MM / <0,005% MC THD (20 Hz-20 kHz): <0,008% MM, <0,01% MC Precisione RIAA: <0,3 dB / 20 Hz - 20 kHz Ingresso: 1 x 5 pin mini XLR / 1 x RCA Line level output: 1 RCA, 1 XLR Power Consumption: <0.5W in standby Power supply: 18 Volt DC / 500 mA Dimensions: 206 x 55 x 153 (164 with sockets) mm (WxHxD) Weight: 930g