Compact portable PA unit with sturdy moulded cabinet and carrying handle. Powered directly from the mains supply, external 12Vdc or internal rechargeable battery for true portability. The main speaker cone is silvered to reflect a 7-colour LED show built into the front grille. A handheld VHF wireless microphone system is built into the rear panel and there are additional jack inputs for a wired microphone and guitar or other instrument. The integral USB/SD media player has an FM tuner and True Wireless Stereo receiver for wireless playback from a smart phone and linking with another PAL unit to form a wireless stereo pair. Overall, a complete sound and light system for house parties, singers and performers. Built-in VHF handheld microphone system True Wireless Stereo pairing Internal USB/SD audio player with FM tuner Mains, DC or rechargeable operation Colourful LED light show from main speaker cone Power supply 100-240Vac 50Hz (IEC), 12Vdc or internal battery Battery Rechargeable 7.4V 1800mAh Li-ion Battery operation time Up to 4 hours (2 hours with LEDs on) HF driver 25mmØ (1") Inputs Mic in + Guitar in 6.3mm jack, Aux 3.5mm jack Controls Wireless Mic, Master, Treble, Bass, Mic Vol, Gtr Vol, Echo Audio source Internal USB/SD/FM/TWS media player Carrier frequency 174.1MHz Power output 30Wrms Main driver 200mmØ (8") SPL @ 1W/1m 83dB Dimensions 390 x 250 x 200mm Weight 3.65kg

Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within. These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume. The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ. Configuration: 2 way Recommended amplifier: 300 W RMS Long Term power: 150 W Short term power: 600 W Nominal impedance: 8 ohm Frequency response: 50Hz - 20KHz -6dB Low Frequency woofer: 15 - 2 coil inch High frequency driver: 1 - 1 coil inch Sensitivity (@1W/1m): 99 dB Maximum SPL cont/peak: 124 / 127 dB Dispersion: 90° x 60° HxV Crossover Frequency: 1.8 KHz Recommended HP filter: 40hz - 24dboct Input connector: 2 x Speakon NL4 in & thru Net Dimension (WxHxD): 410x663x387 - 16.14x26.10x15.23 mm/inch Net Weight: 14.7 / 32.4 kg/lb Transport Dimension (WxHxD): 495x740x475 - 19.48x29.13x18.70 mm/inch Transport Weight: 17.8 / 39.24 kg/lb

RMS Power Handling 300 W Peak Power Handling 1200 W Frequency Range (-10 dB) 50 Hz – 20 kHz Nominal Impedance 8 ohms On-axis Sensitivity 1 W / 1 m 96 dB SPL Rated Peak SPL at 1 m 131 dB Dispersion 80º x 50º Enclosure Material Birch Plywood Color/Finish Black/ISO-flex Paint Connectors 2 x NL4 speakON Dimensions (H x W x D) 65.3 x 37.8 x 32.4 cm 25.7 x 14.9 x 12.8 in Weight 18.5 kg (40.7 lb)

The Altea-715 passive system allow users to choose the powering option they prefer and is designed for use with external amplification and outboard DSP. This system benefits from the high-performance transducers include the D.A.S. 15FV4 loudspeaker, which provides accurate low frequency reproduction with a deep, powerful bass. High frequencies are handled by the brilliant M-28 FEM optimized compression driver with 1″ exit providing exceptional performance and smooth reproduction. RMS Power Handling 500 W Peak Power Handling 2000 W Frequency Range (-10 dB) 60 Hz – 20 kHz Nominal Impedance 8 ohms On-axis Sensitivity 1 W / 1 m 99 dB SPL Rated Peak SPL at 1 m 132 dB Dispersion 90º x 60º Enclosure Material Polypropylene Color/Finish Black /Textured Connectors 2 x NL4 Speakon Dimensions (H x W x D) 71 x 44 x 38 cm 28 x 17.3 x 15 in Weight 18.8 kg (41.4 lb)

Enhance your lower frequencies with the quick and powerful bass response of the XPRS215S subwoofer. The sub’s built-in horn shape and dual 15-inch, high-grade ferrite LF drivers deliver rich, powerful low frequencies, while the Crossover and Phase switches allow you to control your DSP settings effortlessly. * The XPRS215S is sold as a single subwoofer. Double the bass The XPRS215S’ birch hardwood cabinet encloses two 15-inch LF drivers and a built-in horn shape to deliver rich, powerful low frequencies, no matter the event or the setting. Powersoft Class D amps Powersoft’s Class D amp modules produce 2400 W (peak) or 1200 W (continuous) output. The Power Factor Correction (PFC) reduces power consumption while ensuring steady performance in all environments. Instant control A versatile Crossover switch lets you adjust the low pass filter cut-off at stages between 80 Hz and 150 Hz. At the same time, the Phase switch allows you to choose a positive or negative polarity to prevent multiple subwoofers from cancelling each other out. Advanced protection The XPRS subwoofer is packed with features to protect the drivers, amp and power supply – giving you peace of mind, consistent high-quality sound, and extending the life of your sound system. Flexible connectivity The subwoofer has 2 balanced XLR/TRS combo sockets so you can input a couple of devices at the same time. Plus 2 balanced XLR through outputs enable easy connection to other speakers and subs. Designed for the road The durable, birch plywood enclosure keeps your subwoofer safe, while castors on the back of sub and carefully placed handles take the hard work out of transit and set up. Auto-ranging power supply Plug in the XPRS Series anywhere in the world – including venues with generators or temporary power supplies. They will detect and adapt to the voltage without compromising the sound quality. Up to a 7-year warranty We're extending the free warranty period for the XPRS Series active speakers. You can now receive up to 7 years of cover by registering your products online within 90 days of your purchase. Please review the warranty statement for a full list of terms and conditions. Specifications Main Features What's in the Box XPRS 215S x 1 Powerd cord Installation and Operation Manual Important Safety Precautions Specifications Supported voltages 100 V (50 Hz/60 Hz) 110 V to 240 V (50 Hz/60 Hz) Width 743 mm Height 524 mm Depth 811 mm Weight 55.9 kg Frequency Range 40 - 160 Hz System characteristic Maximum Sound Pressure 135 dB Terminals Inputs 2 XLR/TRS Combo (balanced) Outputs 2 Through output XLR (balanced) Amplifier Amplifier Output 2400W peak / 1200W cont. Class D Impedance 10 kΩ Speaker Driver 15 inch ferrite LF cone driver Finish Impact-resistant Black semi-matt textured Handle 4 (on both sides) Pole socket M20 screw socket Enclosure 15 mm birch plywood Protection Amplifier Protection Thermal limiting Over-temperature muting Output overcurrent Driver Protection DC offset removal High frequency stationary loud signals Input voltage limiter (Peak/RMS) Power unit Protection Primary AC mains overcurrent protection Primary AC mains overvoltage protection

TYPE Compact, high-output, passive/bi-amp two-way system FREQUENCY RESPONSE (a) 65Hz-20kHz ± 3dB -10dB @ 55Hz DRIVERS 12" (300mm)/3" (75mm) voice coil, long-excursion, neodymium magnet LF driver 1" (25mm) exit/1.7" (44mm) voice coil, titanium dome, neodymium magnet HF compression driver RATED POWER (b) LF: 400W AES, 1600W peak HF: 50W AES, 200W peak RECOMMENDED AMPLIFIER MA2.0, MA3.0, MA5.2K SENSITIVITY (c) FR: 98dB LF: 99dB HF: 108dB MAXIMUM SPL (d) FR: 124dB continuous, 130dB peak LF: 125dB continuous, 131dB peak HF: 122dB continuous, 131dB peak NOMINAL IMPEDANCE FR/LF: 8 ohms HF: 16 ohms DISPERSION (-6dB) 80° horizontal, 50° vertical user rotatable CROSSOVER 2kHz switchable passive/bi-amp ENCLOSURE 38 litre, multi-laminate birch ply FINISH Textured black polyurea coating PROTECTIVE GRILLE Black perforated steel, Declon® backed CONNECTORS 2 x Neutrik® NL4 INPUT CONNECTIONS FR/LF (+,-): 1+,1- HF (+.-): 2+,2- FITTINGS 21 x M8 threaded inserts 1 x Pole mounting socket 1 x Pocket Handle DIMENSIONS (W) 360mm x (H) 571mm x (D) 341mm (W) 14.2ins x (H) 22.5ins x (D) 13.4ins WEIGHT 19.5Kg (43lbs)

FBT ProMaxx 12a Active Full Range Speaker - 12"+1" B&C neodymium drivers, biamped switched mode amp, 600W LF + 300W HF, 48Hz-20kHz, 90° x 60°, internal DSP with 8 switchable EQ presets, 3 wedge angles (12°, 40° and 55°), XLR in/out, volume, HP filter, ground lift switch, 2x M10 flying points, 35mm pole mount, black plastic housing. Dimensions: 402 x 644 x 345mm. Weight: 15kg

Receiving multiple awards for innovation, MLA technology represents a radical departure from conventional line array thinking, and delivers much more consistent sound across the audience. With independent control of up to 144 individual cells in an array, MLA technology is not constrained by the typical 3dB fall-off in SPL with doubling of distance associated with line arrays. Instead, the engineer specifies exactly what SPL and frequency response is required at the front rows, the mix position and the rear balconies – as well as identifying areas where sound is to be avoided – and intelligent software automatically controls the array to produce that result. Critically, the software predictions are accurate to within +/-1dB of measured results, so the required coverage and SPLs can be programme-in and achieved at switch-on – completely eliminating time consuming trial-and-error during set-up. MLA technology has many advantages over a conventional line array, including: Consistency across the coverage area (the sound heard at the mix position is replicated uniformly across the audience). Noise pollution reduction – MLA’s ‘hard-avoid’ function greatly reduces sound spill outside the defined audience area without impacting on audience enjoyment. Environmental noise issues are tackled head on! MLA provides immense power in a smaller package with freight cost savings and reduction in energy consumption contributing to a lower carbon footprint. MLA offers sonic perfection, transparency and engineer responsiveness The elimination of delay speakers in some venues, where standard line array systems would generally require them – leading to the freeing up of more seats in the auditorium (and greater promoter profitability). The optimisation technique allows software-driven changes without the need to drop the array for physical adjustment – it can also lead to an improvement in sight lines. These advantages apply to the full range of applications – whether concert touring, one-off events, festivals or permanent installations in clubs and live venues. In short, MLA technology embodied in the MLA Series employs a precise science that guarantees greater control, consistency and unparalleled sonic quality. High-efficiency acoustic and amplifier technologies reduce size and weight, and with amplification, processing and control already onboard, less trucking space is required – delivering greater tour profit. Numerically optimised, ultra-compact loudspeaker system Cellular array format with amplification, multi-cellular DSP and digital networking housed in companion sub-bass Dedicated Class D amplifiers for individual powering of individual cells Industry leading DISPLAY2.1™ intelligent software interacts with DSP for highly accurate array optimisation Vertical coverage can be fine-tuned electronically to cope with changing environmental conditions and last minute changes in rigging height “Hard-avoid” areas, such as on-stage, ceilings and site perimeter, can be programmed in Switched mode power supplies with PFC (Power Factor Correction) and global mains voltage operation Two-way design delivers LF/HF peak SPL’s of 130/129dB @ 1m from a single, ultra-compact enclosure Fast, integral flying system for suspension of up to 16 MLA Mini or 12 MLA Mini + 3 MSX enclosures True 100° (-6dB) horizontal constant directivity. Consistent and usable out to 125° (-10dB) 76Hz-18kHz ± 3dB frequency response

Compared to a traditional two-way speaker, the sound is distributed in a much more uniform manner into the listening area, regardless of whether the application is indoors, outdoors or acoustically difficult in terms of reverberation. The cylindrical wave front of the CLA projects sound forwards in a very precise and coherent fashion without the reverberant performance that is typical of conventional speakers which can excite environmental reflections, directing acoustic energy where it is not needed, especially towards the ceiling and floor. Even acoustic feedback such as that generated by microphones is rejected to a far greater extent than a conventional enclosure. Finally, the columns narrow dimensions allow the discreet, unobtrusive integration of the column into any environment. The qualities of the system CLA can be summarized as: High-end sound quality with a frequency response of 33Hz to 20kHz, designed specifically for live Improved dispersion within a set listening area plus extended projection High power performance and dynamic range thanks to the tri-amplification system Portability and modularity – elements can be rapidly daisy-chained via a quick release system, extending both the vertical directivity and sound pressure level Design and elegance for easy integration even in the most demanding installations – the compact dimensions ensure listeners will focus on the sound and not the speaker! Wide horizontal dispersion VERTUS CLA 406A 600W + 300W 133 dB SPL Active Column Line Array 2-way bi-amplified line array column system 4 x 165mm (6.5”) custom woofer voice coil 38mm (1.5”) B&C HF neodymium driver with 36mm (1.4”) exit and 64mm (2.5”) voice coil Waveguide FBT large format with dispersion 100 ° H x 25 ° V Frequency response from 65Hz to 20KHz Amplifiers Class D 600Wrms for LF and HF 300Wrms with switching power supply Processor DSP with 8 EQ presets Control Panel with XLR input and link, volume, presets, filter-HP, ground-lift Neutrik powerCON power IN and LINK connectors 12mm (1/2”) birch plywood with scratch-resistant coating. 12 attachment points above and below for the optional hardware that allows the installation of hanging or pair two CLA406A with angle of 0 ° - 10 ° - 20 ° in the vertical plane Top side tilted 10 ° for the inclination of two columns without damaging gap between the waveguides for a wavefront extremely consistent over the 18kHz 35mm (1.3/8”) top hat for stand mount facility It is ideal for live applications, assisted by sub CLA 118SA, which for fixed installations Built-in amplifier LF/HF: 600/300 W RMS Built-in amplifier peak LF/HF: 1200/600 W Frequency response: 65Hz - 20KHz -6dB Low frequency woofer: 4x6.5 - 1.5 coil inch High frequency driver: 1x1.4 - 2.5 coil - neodymium inch Maximum SPL cont/peak: 133 dB Dispersion: 100°x25° H x V Input impedance: 22 Kohm Crossover frequency: 1.2 KHz Ac power requirements: 640 VA Input connector: XLR with loop Power cord: 5 / 16.4 mm/inch Net Dimension (WxHxD): 190x1235x290 / 7.48x44.68x11.41 mm/inch Net weight: 27 / 59.52 kg/lb Transport Dimension (WxHxD): 290x1235x390 / 11.41x48.62x15.35 mm/inch Transport weight: 32 / 70.54 kg/lb

The powerful system is paired with a custom Sym-X horn with a premium polymer HF driver to provide a smooth and consistent mid- and high-frequency response, while the heavy-duty woofer provides an accurate and consistent transient response for bass that never gets muddy. Proprietary Advanced Impulse DSP tuning and Intelligent Bass Management to deliver a consistent listening experience to your whole audience even at extreme volumes. The integrated digital mixer has a full-color display and features Bluetooth streaming, powerful processing, plus complete wireless control via the SRM Connect app. Professional 2000W Class-D Amplifier Mackie's most advanced amplifier platform to date, delivering remarkable stability, headroom, and audio fidelity High SPL Reliability and rock-solid operation can withstand the most demanding applications Universal power supply (100-240 VAC) with Power Factor Correction for stable operation even with unstable AC power Advanced Impulse DSP / Proprietary Acoustic Tuning Clear sound across the entire dispersion zone means the whole room is the sweet spot Precision crossover and transducer time-alignment ensures balanced and accurate sound Intelligent Bass Management Proprietary LF management technology maintains tonal balance and output level when operating at very high volumes while keeping the bass tight and punchy Wireless Link Wirelessly link two SRM | V-Class speakers together for music streaming applications plus complete control over both speakers Uses latest Bluetooth technology allows up to 328' of range between linked speakers Stereo or dual-zone linking modes allow discrete control over the inputs and outputs of the entire system across two rooms or zones Create a clean setup in minutes Custom Sym-X Horn Allows for total efficiency from the HF transducer minimizing distortion and increasing output Creates a perfectly symmetrical, flat response at the crossover point for exceptionally smooth midrange The horn-loading frequency is set below the drivers’ LF capability allowing for maximum efficiency and optimal performance at the crossover point High-Performance Custom Transducers Large, powerful magnets partner with robust motors, voice coils, and spiders to provide the highest possible efficiency and transient accuracy Additional cooling vents surrounding the specially designed voice coil plus directional cabinet porting ensures maximum heat dispersion and reliability Premium polymer high-frequency driver provides the flattest possible response for incredibly smooth highs that sound natural and balanced Transparent System Limiting and Protection Dedicated processing module monitors and protects the amplifier in real time Sound quality and tonal balance is maintained even under heavy limiting Utilizing powerful multiband compression, the amplifier can target specific frequency ranges to prevent the system from being overloaded rather than turn everything down at the expense of overall output Input limiting keeps your source signal in check so if your sending audio is a bit too hot, the speaker will cool it down SRM Mix Control Built-In 4-Channel Digital Mixer with Bluetooth Dual independent channels that support mic, line, and instrument signals Dedicated 3.5mm stereo aux channel Stream music from any Bluetooth enabled device High-contrast, full-color display for easy single-knob access to mixer and processing Adjust channel levels and EQ Application and venue specific voicing modes Alignment delay up to 100' Save and recall up to 10 user presets Screensaver plus dimmer and contrast control System lock with 4-digit passcode Change front LED function: green, white, off, signal present, multi (cycle through colors) Complete Wireless Control via the SRM Connect App The SRM Connect app gives you access to all adjustments and settings including EQ, levels, and presets Versatile Configuration Options Dual-angled cabinet design allows for use as a high-performance floor monitor Dual-angle pole mount provides optimal coverage and minimal reflections in most venues. The 7-degree downward tilt is perfect for when the speakers are on elevated stages

TYPE Compact, sub-bass system FREQUENCY RESPONSE (1) 52Hz-150Hz ± 3dB -10dB @ 43Hz DRIVERS 12” (300mm)/3” (75mm) voice coil LF driver RATED POWER (2) 400W AES, 1600W peak RECOMMENDED AMPLIFIER MA3.0 SENSITIVITY (3) 100dB (half space) MAXIMUM SPL (9) 126dB continuous, 132dB peak (half space) NOMINAL IMPEDANCE 8 ohms DISPERSION (-6dB) CROSSOVER 120Hz active/passive low pass filter ENCLOSURE 55 litre, multi-laminate birch ply FINISH Textured black paint PROTECTIVE GRILLE Black perforated steel CONNECTORS 2 x Neutrik NL4 PIN CONNECTIONS LF+,- : 1+,1- , Link thro’: 2+,2- FITTINGS 1 x mounting pole socket 2 x pocket handles DIMENSIONS (W) 398mm x (H) 571mm x (D) 364mm (W) 15.6ins x (H) 22.5ins x (D) 14.3ins WEIGHT 20kg (44lbs) Features Very compact sub-bass system Long excursion 12" (300mm) driver Active/passive operation Top hat fitting for pole mounting F8+/F10+ Five year limited warranty Applications Club sound reinforcement Theatre sub-bass AV presentations

PRODUCT DESCRIPTION The FBT XLITE 112A is two way design incorporating a 12” low frequency woofer and 1” HF compression driver coupled to a 90°H x 60°V constant directivity horn. With a frequency range of 50Hz - 20kHz the FBT XLITE 112A speaker provide high fidelity sound for both speech and music applications with a maximum SPL of 129dB. The bi-amplified FBT XLITE 112A active speaker feature a 1200W low frequency amp and a 300W high frequency amp. The control panel features a three-channel mixer with two micro-line inputs, a stereo input and a dedicated channel for bluetooth 5.0; two xlr inputs, stereo input, XLR output with ch1 or mix link selector, HP filter, two mic-line selectors, DSP preset selector, bluetooth 5.0 with pairing led. 4 x M10 rigging points built-in into the cabinet along with the optional mounting brackets allow the FBT XLITE 112A speaker to be surface mounted on walls or ceilings. A standard 1.38” speaker stand socket allows the FBT XLITE 112A to be mounted on speaker stand. KEY FEATURES 2-way bi-amplified system in bass reflex Polypropylene moulded enclosure Woofer custom 12” (LF) / 2,5” voice coil 1” throat / 1,4” voice coil HF compression driver 1200/300W built-in amplifier (LF/HF) Bluetooth 5.0 3-channels mixer 4 DSP presets 30° / 45° monitor taper Universal switching mode power supply 100-240 VAC M10 rigging points 4 DSP presets SPECIFICATIONS Configuration: 2 Way Frequency response: 50Hz - 20KHz Low frequency woofer: 12" / 2.5" VC High frequency driver: 1" - 1.4" VC Maximum SPL cont/peak: 124 / 129 Dispersion: 90 x 60 Input impedance: 22 Input connector: XLR IN/OUT, Jack ST Net Dimension (WxHxD): 356 x 619 x 357 Net Weight: 16.3 KG Transport Dimension (WxHxD): 440 x 700 x 445 Transport Weight: 18.9 Built in amplifier: 1200 / 300 LF/HF

Multimedia player: Usb Flash Drive, Sd Memory Card, STEREO Bluetooth Device, Remote Control Woofer 15’’ VC 2,5” Driver 1’’ VC 1” Line output XLR OUT + ¼” JACK OUT Line input XLR IN + 2 x RCA Mic input XLR IN + ¼” JACK IN Rms power AB class 170 + 30 W Peak power 400W Frequency response 45hz-20khz Peak spl 130 dB Power supply AC110V/AC230V

Designed for use in small- to medium-sized venues, the Mackie SRM-FLEX is a portable column array PA system that can easily be transported, configured, and operated by just one person. It breaks down into four sections and comes with a carry bag and a dust cover to make moving from gig to gig simple. The SRM-FLEX is a two-way 1300W sound system consisting of one 10" woofer, six 2" high-frequency drivers, and an onboard 6-channel digital mixer. The digital mixer features a control-per-function design, 2-band EQ on channels 1 and 2, three application-specific voicing modes, and three choices of reverb. Mic, line, instrument, and aux inputs ensure that you can connect common sources for all sorts of gigs. The SRM-FLEX's built-in Bluetooth capabilities enable you to not only stream music from a mobile device, but also wirelessly mix via a user-friendly app on your iOS or Android mobile device. Six 2" high-frequency drivers in a wide-dispersion array along with the 10" subwoofer provide room-filling sound for audiences of up to 100 people Amplification power of 1300W peak Integrated Bluetooth functionality for wireless music streaming and app control from any iOS or Android device Physical mix controls are redundant to the app for seamless switching between mixing on the SRM-Flex or anywhere in the venue 6-channel digital mixer with DSP, channel levels, and master volume Application-specific voicing modes for music, speech, and live performance 2-band EQ on each mono channel Three flavors of reverb Two XLR-1/4" mic/line/instrument inputs Stereo pair of 1/4" line inputs 3.5mm stereo aux input Balanced XLR line output for connection to an additional SRM-Flex or main mixing console Universal power supply with power factor correction Breaks down into four sections for easy carriage, setup, and operation by a single person Built-in carry handle on subwoofer / mixer module Includes a carry bag (for the array module and extenders) and a protective dust cover (for the subwoofer / mixer module)

MACKIE Thump GO 8" može da služi kao lični monitor za vežbanje ili nastupe, sjajan je za kantautore/izvođače, ulično sviranje, A/V prezentacije, učionice, zvučne sisteme malih klubova, i dr. Zadnji panel sadrži dva kombo XLR 1/4-inčna mic/line kanala sa mikserom i integrisanim DSP-om, a tu je i XLR izlaz za povezivanje dodatnih zvučnika. Brzo i lako se može birati između 4 različita režima zvuka: Music, Live, Monitor, Sub Kanal br. 2 se lako uparuje sa Bluetooth uređajem za striming, a tu je i Link dugme, za uparivanje dva Thump GO-a u zajednički stereo setap. Ostale funkcije: prekidač za indoor/outdoor režime, efekat stišavanja (pri korišćenju mikrofona), feedback extermination, i on/off LED dugmetom (za frontalno LED svetlo). Ultra-efikasno pojačalo klase D od 200 W, sa Bluetooth® povezivanjem 8” -ni vufer visoke izlazne snage, 1"-ni kompresioni drajver Litijum-jonska baterija (može da se vadi), trobojni označivač popunjenosti baterije Radni vek baterije je do 12 sati Bežična kontrola putem Thump Connect 2 aplikacije Dvokanalni digitalni mikser sa XLR izlazom, Feedback Eliminator Precizno digitalno ravnanje crossover-a i drajvera Dugotrajna, lagana konstrukcija sa čvrsto obloženom čeličnom zaštitnom mrežom Dimenzije: 457 x 230 x 284.5 mm, Težina: 8 kg Snaga: 200 W Peak Klasa pojačala: LF: Class-D, HF: Class-D Drajveri: Visokotonac - 1 x jednoinčni polimerski kompresioni drajver, Niskotonac - 1 x 8-inčni vufer (203.2 mm) Procesovanje signala – crossover: 2 kHz, 24 dB/Octave Odziv (frekvencija) 57 Hz - 20 Khz: -10 dB Dimenzije: 614.7 x 358 x 355.6 mm, Težina: 13.2 kg Maksimalni nivo zvučnog pritiska: 115 dB (SPL) Ugao pokrivanja: 90° H x 60° V Impedansa, ulazna: 8 kΩ (balansirana), 1 MΩ (nebalansirana); izlazna: 600 Ω Snaga (AC input): 100 do 240 VAC, 50 / 60 Hz, AC konektor: 1 x IEC, Potrošnja: 150 W Audio I/O: 2 x kombo XLR 1/4"-ni TRS ženski ulazi (balansirani/nebalansirani) za mic/line, 1 x XLR 3-pinski muški balansirani Line Thru

Class D 1,000W RMS Powered Speaker 2,000W Peak Power Generates up to 128dB SPL Integrated DL2 Digital Mixer Two Flexible Input Channels DSP Effects, EQ and Audio Tools Common-Magnet Design Unpowered Audio Thru Output PA Speaker Configuration Active 2-Way Total Power Capacity 1000 W RMS 2000 W Peak Amplifier Power Rating LF: 500 W RMS 1000 W Peak HF: 500 W RMS 1000 W Peak Amplifier Class Class-D Drivers HF Driver 1 x 1.75" / 44 mm Polyimide Compression Driver with 1" / 25 mm Throat LF Driver 1x 12" / 305 mm Woofer LF Voice Coil 2.5" / 64 mm Magnet HF: Ferrite LF: Ferrite Performance Frequency Response 38 Hz to 20 kHz -10 dB Maximum SPL 128 dB Coverage Angle 90° H x 90° V I/O Impedance Mic Input: 3.3 Kilohms (Balanced) Line Input: 20 Kilohms (Balanced) 10 Kilohms (Unbalanced) 1/4" Input: 16 Kilohms (Balanced) 8 Kilohms (Unbalanced) XLR Line Input: 20 Kilohms (Balanced) 10 Kilohms (Unbalanced) Hi-Z Input: 1 Megohms (Unbalanced) RCA Input: 25 Kilohms (Unbalanced) Total Harmonic Distortion/Noise < 1% Connectivity Audio I/O 1x Combo XLR-1/4" TRS Mic/Line Input 1x Combo XLR-1/4" TRS Mic Input 1x Stereo RCA Input 1x XLR 3-Pin Thru/Output Signal Processing Crossover 1.6 kHz EQ LF Shelf: ±15 dB at 80 Hz MF Notch/Peak: ±15 dB at 2.5 kHz HF Shelf: ±15 dB at 12 kHz Alignment Delay 0 to 300 ms Power AC Input Power 100 to 120 VAC, 50 / 60 Hz 220 to 240 VAC, 50 / 60 Hz AC Power I/O 1x IEC Power Consumption 250 W Physical Mounting 1 x Pole Socket 3 x M10 Handles 1x Top Cooling Fan (Variable Speed) Construction Material ABS, Metal Grille Operating Temperature 32 to 104°F / 0 to 40°C Dimensions 15.9 x 15.3 x 14.3" / 403 x 389 x 363 mm Weight 31 lb / 14.1 kg Packaging Info Package Weight 37 lb Box Dimensions (LxWxH) 20 x 20 x 19.5"

For Boardroom A/V to Live Music Portable Powered Loudspeaker System 3-Channel Mixer with 3-Band EQ Two Mic/Line Preamps with 48V Hi-Z Input for Instruments Dedicated Stereo Line-Level Channel Built-In Limiter for System Protection Mic Stand Integration System Lightweight at 7.6 lb Includes Power Cord Key Specs Speaker Configuration 1x Full-Range Loudspeaker Number of Input Channels 3 (2 x Mono, 1 x Stereo) Amplifier Power Rating 150 W Audio I/O 1x Combo XLR-1/4" TRS Balanced/Unbalanced Mic/Line/Hi-Z Input 1x Combo XLR-1/4" TRS Mic/Line Input 1x Combo XLR-1/4" TRS Line Input 1x Stereo RCA TS Input 1x XLR 3-Pin Male Mic/Line Thru Portable PA System Speaker Configuration 1x Full-Range Loudspeaker Number of Input Channels 3 (2 x Mono, 1 x Stereo) Amplifier Power Rating 150 W Amplifier Class Class-D Speakers Full-Range Driver 5.25" / 133.35 mm Cone Magnet Neodymium Signal Processing Input Pad No EQ Contour: ±15 dB at 12 kHz (on Master) ±15 dB at 2.5 kHz (on Master) ±15 dB at 100 Hz (on Master) Performance Frequency Response 100 Hz to 17.5 kHz -3 dB Frequency Range 60 Hz to 22 kHz -10 dB Maximum SPL 120 dB (Peak) I/O Impedance Mic Input: 3 Kilohms (Balanced) Hi-Z Input: 20 Kilohms (Balanced) Line Input: 10 Kilohms (Balanced) THD 0.05% Protections AC Fuse, Output Limiter Connectivity Audio I/O 1x Combo XLR-1/4" TRS Balanced/Unbalanced Mic/Line/Hi-Z Input 1x Combo XLR-1/4" TRS Mic/Line Input 1x Combo XLR-1/4" TRS Line Input 1x Stereo RCA TS Input 1x XLR 3-Pin Male Mic/Line Thru Phantom Power +48 V (Switchable) Power AC Input Power 100 to 240 VAC, 50 / 60 Hz AC Power I/O IEC Input Physical Transport Options Handle (Top) Mounting 1 x Mic Stand Socket (Bottom) Construction Material Polypropylene Environmental Protection No Operating Temperature 32 to 104°F / 0 to 40°C Dimensions 11.2 x 8 x 6.8" / 28.4 x 20.3 x 17.3 cm Weight 7.6 lb / 3.4 kg

EPAX 400 - Kombo System PA - 4180 MIKSER + ZVUČNICI Karakteristike 4/5 kanalni mikrofon / linijski ulaz Mikrofonski ulazni nivo: - 60dB ulazna impedansa 600 oma Linijski ulazni nivo: 20dB - ulazna impedansa 47 K oma Kanalna regulacija klipinga 5-pojasni grafički ekvilajzer 3-pojasni kanalni ekvilajzer 1-16 band grafički ekvilajzer Izlaz pojačala snage 2x75W 8 oma THS < 0,1 % Frekvencijski odziv <± 0.5 dB (20 ~ 20KHz) Odnos signal šum > 105dB ZVUČNICI Impedansa ....................... 8 oma Tip visokotonca ....................... piezoelektrični Vufer prečnika .................... 8 “ PA - 4180 MIKSER Snaga .................... 90V RMS @ 4 oma po kanalu Odnos signal/šum ...................................................... > 115dB THD Izlazna snaga, 20Hz do 20KHz ........................... < 0,1 % Crosstalk (1KHz na 0dBu, kanal na glavnom izlazu) Kontrole fader-a............................. < - 60dB Frekventni odziv (mikrofonski ulaz na izlaz) Linijski nivo O/P na +4 dBu u 600 ohms ................. +0 / - 3dB Pojačalo snage O/P 1 V na 8 oma po kanalu ......... +0 / - 3dB Osetljivost na linijskom izlazu +4 dBu sa Master kontrolama i kontrolama kanala postavljen na srednji položaj Linijski ulaz za mikrofon .......................................... -54/-24dB Ulaz za snimač ........................... - 6dB Maksimalni ulazni nivo XLR ............. - 9dB Maksimalni ulazni nivo 1/4" banane .. +22 dB KANALna korekcija signala Ekvilajzer niskih tonova................ 90Hz ± 15dB Ekvilajzer srednjih tonova.......... 2.5KHz ± 15dB Ekvilajzer visokih tonova .............. 12kHz ± 15dB MASTER korekcija signala Ekvilajzer niskih tonova ..................... 90Hz ± 15dB Ekvilajzer srednjih tonova .............. 2.5KHz ± 15dB Ekvilajzer visokih tono...................... 12kHz ± 15dB Mikrofonsko predpojačalo E.I.N. (150 oma - terminisano, maks. Gain) .................. -102 dBm Napajanje ....................... 100-120, 220-240 VAC, 50-60 Hz Osigurači ................................................... 5x20mm stakleni 4A/250V za 115VAC, i 2A/250V za 230VAC operaciju, osigurač brze reakcije Dimenzije (ŠxVxD) .................(40 x 70 x 27 cm) Težina ........................................ 28.4 kg

Ispravne, ne prde, ne skripe, ne motane, nepopravljane...3 komada...

Cene nisu fiksne, odredite ih sami! Ukoliko budete realni, lako cemo se dogovoriti. Nemojte se stideti cenkanja, ovo nije prodavnica, tako da je svaki dogovor moguc Prenosivi Blutut zvucnik muziku moze ocitati na sledece nacine: - Preko blututa - USB flesa - SD kartice - AUX kabla Reprodukuje muziku sa mikro SD memorijskih kartica ili USB fleš uređaja. Ugrađeni digitalni radio,FM. AUX ulaz 3,5 mm priključak na koji se mogu priključiti telefon, laptop, računar, mp3 plejer itd . . Specifikacija: Udaljenost do 10m Velicina zvucnika 4inch-a Izlazna snaga 5W Frekventnost 100Hz - 20KHz FM pretraga od 87.5 do 108.0 MHz USB punjenje DC5V Baterija 800mAh Podrzava memorijske kartice do 32GB Vreme punjenja 2-3 sata Dimenzije 15x10x22.4cm Za sve ostale informacije, mozete nas kontaktirati ovde, na "Viber"ili"What's Up'' kao i pozivom Vladimir Pogledajte i nase ostale oglase.Za prave kupce,nijedna cena nije fiksna. Unapred hvala

Na prodaju D. A. S Španski zvučnici Malo radili, prodaju se zbog zatvaranja lokala. Uz zvučnike komplet kablovi i džekovi

Pogodan za polu-profesionalnu upotrebu 2-sistemski bas-refleks sistem Veoma jako plasticno ABS kućište otporano na udarce. Opremljeno sa ručkama Priključak: zvučnik NL4 konektor spikon Model Pasivna kutija, Maksimalna snaga 400V Izlazna snaga 200V , Impedance: 8 Ohm Frekvencijski odziv 50Hz - 18kHz SPL 1V / 1m 96dB SPL najveća 122dB voofer 12 "hornna 1" titanium Dimenzije 395 k 430 k 630mm Težina 14kg

Prodajem zvucnike marke Kenwood KL555D u perfektnom stanju.

PA-/Disko Zvucnici Fidek Audio Corporation USA 1. FD-330A, 3Way reflex A Serija, Fullrange Cena 140€ /kom Komponente 12” (30,5cm) Bas + 100D Horna + Piezo Frekventni raspon: 38 – 20kHz Impedansa: 8 Ohm Snaga: 200/300W Sound level: 102 db Dimenzije: 69x44x40 Tezina: 24 kg 2. FD-38AR, 2Way reflex A Serija, Fullrange Cena 165€ /kom Komponente 15” (38,1cm) Bas + 120D Horna Frekventni raspon: 36 – 20kHz Impedansa: 8 Ohm Snaga: 200/400W Sound level: 103 db Dimenzije: 72x54x47 Tezina: 32 kg

Očuvani zvučnici marke Canton CX Tri satelita i centralni zvučnik (2.1) Zvučnici su iz iste serije što možete videti na slikama Zvučno izvanredni. Potpuno ispravni ! ! ! Molim Vas bez zamena. Slanje predmeta prodaje tek nakon uplate nа tekuci račun. Hvala na razumevanju. Svaki uredjaj pre slanja biće kratko snimljen u radu, snimak će biti poslat preko Vibera kupcu pre kupovine. Uredjaj će biti perfektno upakovan i kao takav poslat kupcu. Technical specifications : Dimensions sat. : 9 x 9 x 10 cm (W x H x D) Dimensions cent. : 19,5 x 10 x 9 cm (W x H x D) Rated / music power: 40/70 watts. Frequency range: 120 - 25000 Hz. Sensitivity: 87dB Transition frequency: 5000 Hz. Woofer chassis: 80 mm. Weight 1.5kg ( Cent. ) Weight 0,8kg ( Sat. )