Marketing
Postavite oglas
Kontakt
Pratite promene cene putem maila
- Da bi dobijali obaveštenja o promeni cene potrebno je da kliknete Prati oglas dugme koje se nalazi na dnu svakog oglasa i unesete Vašu mail adresu.
101-125 od 1009 rezultata
Prati pretragu "EKSTRUDER,"
Vi se opustite, Gogi će Vas obavestiti kad pronađe nove oglase za tražene ključne reči.
Gogi će vas obavestiti kada pronađe nove oglase.
Režim promene aktivan!
Upravo ste u režimu promene sačuvane pretrage za frazu .
Možete da promenite frazu ili filtere i sačuvate trenutno stanje
Twin Screw Extruder Davis-Standard 25IN25 - PET films were produced on the extruder, working width: 650-800mm, output: 600-700kg/h, with cooling spirals, new extruder screw, degassing system, other spare parts and documentation, without dosing system, an on-site inspection is possible. Poruka Poruka
Regranulation Machine Plastmachines PM 60/35 - Includes (1) Single Screw Extruder PME60/35, screw diameter: 60mm, screw length: 35D with degassing vacuum pump, barrel heating zones: 7x 20kW, throughput: 60-180kg/h, power: 70kW, with integrated electrical control cabinet with temperature controllers and all connections, continuously operating screen changer type L-026 with two channels, granulating nozzle for 20 strands, stainless steel water bath with deflection rollers and cooling fan, dosing unit with hopper, (2) Double Screen 800/300 stainless steel with double screen chute, round perforation 8mm for downstream connection of a transport suction unit, monitor control, strand pelletiser GR 250, infinitely variable collection heating, single knife, inclined cut, pneumatically pressed feed roller, outlet with slide (3) Dry Air Dryer E200 with one fully insulated 1000l V2A vessel, drying throughput: 250kg/h, stationary unit, easy cleaning when changing material due to pull and plug system, process controlled, with automatic boiler filling by material conveying system Z-AS/GV SFR 80, connected load: 18kW. Poruka Poruka
Location: Barneveld Type: MPC/V30 Mach.No: 65034 Inlet diameter: 30 mm L/D: 14 Double screw extruder: (1x) Screw diameter: 30mm, Screw length 420mm Co-rotating: check Number of heating zones: 3 (6x 200 Watt per zone) + die heater Electric heating: check Water cooling: check DC-motor: 3,0 KW, 180 Volt With variable speed drive: check Feeding with metering screw: dia. 32mm Used on: toner Floorspace: 2,0x0,9 M Total height: 2,0 M merk: Baker Perkins, Stoke on Trent productiejaar: unknown General Main Features Specified Features - Double screw extruder Information Poruka Poruka
Location: Barneveld Type: EV 32 Mach.No: B 101 Inlet diameter: 80 mm L/D: 36 Double screw extruder: check Screw diameter: 32 mm Counter rotating: check Number of heating zones: 8 Steam heating: check AC-motor: 45/52kW, 380-420/440-480/660 Volt, 1480/1780 rpm Feeding with metering screw: check clextral C0 Number of temperature controllers: 8 Material: Stainless steel 1.4306 (304L) With switchgear: check(as is) Total height: 3.26 CE: check Floorspace: 4,3x1,42 m Extra Specifications: machine comes with k-tron Feeder specifications: Type LWF D5/ Type K2-ML-T35/DR Dia: 400mm feeder inlet Outlet: 110mm merk: Clextral Framatome General Main Features Specified Features - Double screw extruder Information Poruka Poruka
Location: Barneveld Type: BC45 Mach.No: 876 Inlet diameter: 105 mm L/D: 28 Double screw extruder: check Screw diameter: 55 mm Counter rotating: check Number of heating zones: 5 Electric heating: check 7kW each Water cooling: check DC-motor: 21 kW, 430 Volt Screw speed: 50-300rpm Feeding with hopper: check Exchangeable segments: check Material: Mild steel With switchgear: check(as is) Sizes switchgear: 3,3x0,62x2,26 m Total height: 2,3 m CE: check Floorspace: 4,25x1,25 m Extra Specifications: machine comes with additional parts. the screw consists of segments specifications p34 cutter: 2.2kW, 380/420 volts, 2280rpm merk: Clextral General Main Features Specified Features - Double screw extruder Information Poruka Poruka
Preis: Contact us for price Marke: Baker Perkins Twin screw extruder APV Baker int. ref. APV 5 (Baker Perkins) Ø50/25D + additional liner 10D(for 35D) this was totally revamped in 2017 liners and screws are in quite good conditions reduction gear was replaced in 2021. Operator panel with recipes and 14 heating zones all in good conditions Find more here pokazati kontakte Contact us at pokazati kontakte Poruka Poruka
Pet food extruder MK-50 Equipment for the production of food for dogs, cats, fish, goats and other animals, including cattle. The principle of feed production is the extrusion method. This method has been improved by installing an electric heater that heats the working section to the required temperature and maintains it during operation. This addition makes the operation of the feed extruder more even and efficient in comparison to other extruder designs, in which the heating of the working section is caused by the friction of the material (or the screw itself) against the walls of the working section of the screw. As a result, temperature control is possible, ensuring consistent yield and end product quality. In addition, the raw material is subjected to heat treatment at high temperatures, which ensures product sterilization. The feed extruder is equipped with several types of fillers (pillow, heart and ball) that allow the feed to be shaped in different ways. The use of knives also makes it possible to control the size of the final product, from 1 to 20 mm. The device has an automatic adjustment of the feed speed, which can be changed depending on the situation. Specification Product dimensions Length 870,0 (mm) Width 1520,0 (mm) Height 1230,0 (mm) Features Product Weight 263 (kg) Usage For the production of food Efficiency 60 (kg/h) Energy consumption 7.5 (kW) Tension 380 (V) Drive type Electric Additional information Guarantee 12 month Video review Poruka Poruka
Grinder for plastics GRINDEX - 11 The GRINDEX series of plastic shredders are versatile, high-performance medium-sized shredders. Ideal for medium to large scale production, GRINDEX shreds a wide range of plastics, rubber and other solid waste (wood, paper, fiberglass, etc.) as well as difficult to grind waste (medium-sized castings, pipes, thick-walled sheet materials, cans, drums, bottles and films). Intended for. The size of the initial fraction is determined by the size of the sieve mesh. Depending on the customer's requirements, a sieve mesh with the required cell size can be installed. Thanks to the efficient processing process, it is possible to obtain a well-flowing, dense bulk product with minimal energy consumption and high productivity. Specification Product dimensions Length 1515,0 (mm) Width 1150,0 (mm) Height 1585,0 (mm) Features Product Weight 850 (kg) Usage For plastics of high and medium hardness Efficiency 250 (kg / h) Energy consumption 11 (kW) Tension 380 (V) Drive type Belt (3 pcs) The diameter of the nozzle for the intake of raw materials 400*220 (мм) Outgoing faction up to 10 (mm) Additional information Guarantee 12 month Number of knives 17 (pcs) Video review Poruka Poruka
Feed extruder (soy) EGK-150 , 15 kW | 150 kg/h Household grain extruder with a capacity of 15 kW, intended for the preparation of fodder for pets, poultry and fish with a productivity of up to 150 kg per hour. A homogeneous stick is obtained at the output. For the convenience of further use, you can use a special shredder. Operates from 380 V mains. Great for small home and farm use. Advantages of extruded feed: 1. The fodder extruder in the pressing chamber grinds the fodder, and under the influence of a pressure of 40-60 atmospheres, it is heated to a temperature of 180C. When leaving the die, due to the difference in pressure, water hammer occurs in the grains, as a result of which the grains foam, increasing in volume more than 5 times. As a result, 5 times more fodder for the farm is obtained; 2. Due to ultra-fast heat treatment, starch, which is poorly absorbed by animals, is broken down into simple carbohydrates and sugar, while most of the vitamins and proteins do not have time to break down, and the high temperature makes it possible to get rid of pathogenic microflora and fungus, which are present even in dried grain; 3. The feed is disinfected in the extruder, which is especially useful when growing young animals that are sensitive to various types of bacteria and other harmful microorganisms; 4. The possibility of using spoiled grain, underripe and almost any quality; 5. The feed after the extruder has the shape of a stick, is pleasant to the taste and is eaten by animals with pleasure, leaving no waste. Specification Product dimensions Length 1100,0 (mm) Width 1100,0 (mm) Height 1000,0 (mm) Features Product Weight 220 (kg) Producer LabEcoTech Usage Grain,soy Efficiency up to 150 (kg/h) Energy consumption 15 (kW) Tension 380 (V) Tank volume 20 (L) Additional information Guarantee 12 month Video review Poruka Poruka
Feed extruder EGK-30, 4 kW (220/380V) 30 kg/h Feed screw extruder EGK-30 is designed for sintering feed from grain crops. The model has a productivity of up to 30 kg/h. 2 types of 220/380V connection are possible. You can also purchase equipment without an engine or only the working part (working module). At the request of the customer, the extruder can be additionally equipped with a BP-50 resin hopper. The EGK-30 grain extruder efficiently processes grain: corn, oats, wheat, rye, legumes, soy, and up to 20% bran can also be added. It is important that the grain or mixture does not need to be steamed before processing. The main advantage of this extruder is that it can be used in the conditions of a small household, where there is no industrial voltage of 380 V. Specification Product dimensions Length 750,0 (mm) Width 800,0 (mm) Height 500,0 (mm) Features Product Weight 55 (kg) Producer LabEcoTech Efficiency up to 30 (kg/h) Energy consumption 4 (kW) Tension 220/380 (V) Tank volume 6 (L) Additional information Guarantee 12 month Video review Poruka Poruka
Bunker / Feeder for extruder BP-50 Specification Product dimensions Length 700,0 (mm) Width 500,0 (mm) Height 500,0 (mm) Features Product Weight 17 (kg) Efficiency up to 60 (kg/h) Energy consumption 0,1 (kW) Tension 220 (V) Tank volume 50 (L) Additional information Guarantee 12 month Poruka Poruka
Grinder for plastics GRINDEX - 15 The GRINDEX series of plastic shredders are versatile, high-performance medium-sized shredders. Ideal for medium to large scale production, GRINDEX shreds a wide range of plastics, rubber and other solid waste (wood, paper, fiberglass, etc.) as well as difficult to grind waste (medium-sized castings, pipes, thick-walled sheet materials, cans, drums, bottles and films). Intended for. The size of the initial fraction is determined by the size of the sieve mesh. Depending on the customer's requirements, a sieve mesh with the required cell size can be installed. Thanks to the efficient processing process, it is possible to obtain a well-flowing, dense bulk product with minimal energy consumption and high productivity. Specification Product dimensions Length 1296,0 (mm) Width 1100,0 (mm) Height 1522,0 (mm) Features Product Weight 820 (kg) Usage For plastics of high and medium hardness Efficiency 350 (kg / h) Energy consumption 15 (kW) Tension 380 (V) Drive type Belt (3 pcs) The diameter of the nozzle for the intake of raw materials 400*220 (mm) Outgoing faction up to 10 (mm) Additional information Guarantee 12 month Number of knives 22 (pcs) Video review Poruka Poruka
Istorija cene
Naziv oglasa
Početna cena
Najveća cena
Najniža cena
Nema podataka o istoriji cene
Pretraga: " "
Uspešno ste zapratili pretragu.
Sve zapraćene pretrage možete videti u
korisničkom panelu.