Product Description ProAc Response DB3 is a new high-end stand mount loudspeaker available at an affordable price offering good efficiency and a rich sound that belies its compact size. Exceptional Performance DB3 continues the legendary ProAc stand mount tradition and produces an excellent level of sound quality when partnered with high-quality electronics. Featuring a similar cabinet size to that of the Response DB1, there are structural and visual differences including a new bass driver and crossover which were chosen for exceptional performance but at a more affordable price. Superb Bass Extension The new Response DB3 has a wonderfully rich and extended bass quality, loaded with a single reflex port in the rear baffle of the cabinet. The newly designed bass driver with a special surround and dust cap, allows extra information from the voice coil to give a smoother transition of frequencies to the 1" dome tweeter. It is a long throw design with a raised spider and linear motor system and is responsible for a remarkable bass extension. Soft Dome Tweeter The tweeter is ProAc's 1" silk soft dome with special coolant, used in many other ProAc designs, which has a superbly flat response with electrostatic type detail and sweetness. This is combined with a 5” long throw unit incorporating mikapulp cone and a transparent dust cap. Detailed Reproduction The crossover has been designed to seamlessly mate with the tweeter using the finest components on the dedicated circuit board. Multistrand oxygen free copper cable is used throughout which is split for optional Bi-wiring or Bi-amplification The sound quality is what music lovers have come to expect from ProAc with a very natural presentation, excellent detailed, sweet high-frequency reproduction and exceptional soundstage. Stunning Finishes ProAc DB3 is available in the usual choice of standard wood veneer finishes which now includes natural oak. The other standard finishes are black ash, maple, Cherry, silk white or mahogany. Rosewood and ebony finishes are also available at a premium. This wide choice of finishes ensures you find the right style to match your home decor or personal choice. Performance Nominal Impedance: 8 ohms Recommended Amps: 20 to 100W Frequency Response: 38Hz-30kHz Sensitivity: 88.5dB linear (1w @1m) Drivers Bass/mid: 5” long throw Cone material: mikapulp cone Dust cap: Transparent Tweeter: 1” silk dome Dome uses: Special coolant Crossover Circuit board: Finest components Cable: Multistrand oxygen free copper Split: optional Biwiring or Biamp General Mode: Stand mounting Grille: Acoustic transparent crimplene Dimensions (HWD): 320 x 182 x 280mm Weight 19.6lb (8.8kg) each

It’s a Wrap The new HTM82 D4 may be our most compact centre-channel speaker, but it shares the design DNA of its larger siblings, including the Reverse Wrap cabinet and Matrix™ bracing. The combination of the two technologies ensures a quieter, more acoustically efficient and better-sounding speaker than ever. Reverse Wrap cabinet Instead of a conventional loudspeaker box, our cabinets are made from a continuous curved section of wood, with the drive units mounted at the heart of the curvature. This stiffer, more inert structure resists mechanical resonances far better and also ensures better dispersion of sound. Continuum™ cone midrange Introduced as a huge evolutionary change for us in 2015, the Continuum cone midrange drive has swiftly become a fundamental element in every Bowers & Wilkins loudspeaker. With exceptionally low noise, it ensures outstanding resolution without colouration or masking of detail. Decoupled midrange assembly HTM82 D4 has a dedicated midrange cone using three key Bowers & Wilkins technologies: the Continuum cone, Biomimetic Suspension and midrange decoupling, the latter ensuring minimal interference from the operation of the loudspeaker’s bass drivers. The result is outstanding clarity. The science of sound Innovation is at the heart of everything we do. We question, we examine, we understand and then we evolve. We use computer modelling to explore and reimagine every aspect of loudspeaker design. Size & weight Dimensions Height: 289mm (11.4 in) Width: 715mm (28.1 in) Depth: 369mm (14.5 in) Net weight 25.15kg (55.4 lb) Technical details Technical features Diamond tweeter Solid body Tweeter-on-Top Continuum™ cone FST Anti-Resonance plug Biomimetic Suspension Matrix™ Aerofoil™ cone bass units Flowport Description 3-way vented-box system Drive units 1x ø25mm (1in) Diamond dome high-frequency 1x ø130mm (5in) Continuum cone FST midrange 2x ø165mm (6.5in) Aerofoil cone bass units Frequency range 33Hz to 35kHz Frequency response 45Hz to 28kHz (+/-3dB from reference axis) Sensitivity 89dB (on axis at 2.83Vrms at 1m) Harmonic distortion 2nd and 3rd harmonics (90dB,1m on axis) <1% 100Hz – 20kHz <0.3% 100Hz – 20kHz Nominal impedance 8Ω (minimum 3.0Ω) Recommended amplifier power 50W – 200W into 8Ω on unclipped programme Max recommended cable impedance 0.1Ω

Since 1982, Wharfedale’s famous Diamond speakers have served as the classic entry point to true high-fidelity sound, their exceptional sonic value for money earning numerous ‘product of the year’ accolades in the UK and around the world. This autumn, with the introduction of the all-new Diamond 12 Series, Wharfedale once again raises the bar for affordable, high-performance loudspeakers. To develop the new range, Wharfedale has collaborated with world-renowned speaker designer Karl-Heinz Fink for the first time. Fink’s track record of delivering class-leading sound from modestly priced speakers is exceptional and with the Diamond 12 Series, he and Wharfedale’s team of acoustic engineers have achieved a new entry-level benchmark. Wharfedale determined that the Diamond 12 Series should be an opportunity to start afresh. A challenge was issued to Mr Fink: how much sonic performance can you wring from a range of speakers at classic Diamond price points? And so, he and Wharfedale’s team set to work, delivering clean-sheet designs without a single part unaltered from the outgoing – and more costly – Diamond 11 Series. Klarity – The Difference is Clear Since the Diamond 8 Series in 2001, Wharfedale has made the mid/bass cones for every Diamond generation from Kevlar. 19 years and many award-wining ranges later, Wharfedale has developed a new composite called Klarity™. The chief ingredient of Klarity™ is polypropylene, a material that has been used to make speaker cones since the BBC researched its use for this purpose in the 1970s. Polypropylene cones are renowned for their characteristically low distortion and controlled ‘breakup’, as well as their resistance to moisture in the air. They also have a reputation in some quarters for sounding a little ‘unexciting’ – a perception that is largely the result of mediocre engineering. When designed and implemented optimally, polypropylene cones can sound enthralling. Bass/Mid Drivers – Cone Surround, Magnet and Voice Coil In the past, polypropylene cones have often been combined with high-damping surrounds to achieve a smooth response curve. However, the hysteresis of these surrounds can restrict dynamics and make bass sound a little ‘soft’. For the Diamond 12 Series, the aim was to combine the Klarity™ cone with a low-damping surround, thereby achieving both low colouration and expressive dynamics. This was not a simple task but, by simulating many different cone shapes and adding ribs to provide further stiffening, a flat response curve was achieved without resorting to a high-damping surround, thereby striking the ideal balance. The Klarity™ diaphragms are driven by a substantial, precision-made magnet system with an aluminium compensation ring to minimise the effect of variations in inductance as the voice coil travels. This contributes to an absence of distortion and intermodulation generated by the motor system. The voice coil is wound on a high-power epoxy/glass fibre bobbin – highly unusual in speakers at this price level. This has the advantage of not adding eddy currents and delivering greater power handling than an aluminium bobbin, whilst also being much stiffer than the Kapton type. Treble Unit and Crossover The Diamond 12 Series’ treble unit sports a 25mm dome made from a woven polyester film with a high-loss coating to deliver open and smoothly extended high frequencies. The magnet system and the front plate have been optimised for wide dispersion and uncompressed behaviour. The front plate is flat and exposes the dome as much as possible, with a short duct to balance the acoustic load and improve the SPL (sound pressure level) measurement. The treble unit combines seamlessly with the mid/bass driver via a crossover network using an acoustic LKR 24dB topology. This includes air core inductors of the type more commonly found in high-end speakers, selected because they produce the lowest distortion of all inductor types. As the resistance of the coil is higher than a standard laminated steel or ferrite core inductor, the magnetic structure of the mid/bass driver has been modified to compensate, resulting in fast, clean bass with no distortion from the inductor. Cabinet Construction The cabinet is a critical part of any high-performance loudspeaker. At entry-level price points, corners are often cut to constrain cost, but this is a mistake; no matter how good the drive units, their performance will be wasted if the cabinet’s construction is suboptimal. For this reason, Diamond 12 Series speakers feature cabinets constructed with a level of sophistication usually reserved for much more expensive designs. The rear-ported enclosure of each model is precisely sized so that the internal volume works in harmony with the drive unit system to deliver the desired sonic result. The cabinet walls are made from sections of wood fibre board of varying thickness, constructed in such a way as to subdue the identifiable characteristics of the cabinet’s ‘sound’ and ensure the drivers’ output remains unsullied. The resonant properties of each element – even the glue – were considered to determine the ideal combination of materials and placement. Inside the cabinet, Intelligent Spot Bracing connects opposing walls with a specific form of wood brace to achieve optimal reduction of cabinet resonance. These braces are precisely modelled by computer simulation to improve upon the commonplace ‘figure of eight’ brace, which can have the effect of transferring resonance from one wall to another. Speaker type 2.5-way floorstanding speaker Enclosure type Bass reflex Treble driver 25mm textile dome Mid/bass driver 150mm Klarity™ composite Dedicated bass driver 150mm Klarity™ composite Sensitivity (2.83v @ 1m) 89dB Recommended amp power 30-200W Peak SPL 102dB Nominal impedance 8Ω compatible Minimum impedance 5Ω Frequency response (+/-3dB) 40Hz-20kHz Bass extension (-6dB) 35Hz Crossover frequency 2.1kHz Dimensions (HxWxD) 1150x200x350mm Weight (each) 22.4kg

Retrieve your old records from the attic and play them on this modern turntable. Enjoy the crystal-clear sound of your vinyl, both old and new. Switch from 33 to 45 revolutions to play your LP or single at the right speed. And what if you want to enjoy your favourite records while cycling, in the car or in the train? The Lenco LBT-120BK digitises all your favourite records via the built-in USB port. You can transfer the recordings to a USB stick in next to no time and carry them with you in your pocket. Lenco is fully aware that you want to treat your vinyl records as gently as possible, so the Lenco LBT-120BK turntable is semi-automatic. When the final track ends, the stylus automatically lifts off the record and the tone arm returns to its support. This prevents scratching so that you can enjoy your beloved records for longer. The Lenco LBT-120BK is supplied with a dust cover that keeps your Lenco fresh and clean during brief periods when you are not using your turntable. Main product PRODUCT HEIGHT 1 11.70 centimeter PRODUCT WIDTH 1 42.10 centimeter PRODUCT DEPTH 1 36.50 centimeter COLOUR PRODUCT Black MATERIAL Metal, Plastic MAINS ADAPTER INPUT VOLTAGE 1 (V) 100-240 V MAINS ADAPTER INPUT FREQUENCY 1 50-60 Hz MAINS ADAPTER OUTPUT VOLTAGE 1 (V) 12.00 volt MAINS ADAPTER OUTPUT CURRENT 1 1.00 ampere MAINS ADAPTER OUTPUT POWER 1 (W) 12.00 watt MAINS ADAPTER NO LOAD ENERGY CONSUMPTION 1 (W) 0.05 watt STANDBY POWER IN WATTS 1 0.11 watt OFF-MODE POWER IN WATTS 1 0.000 Watt TIME PERIOD SWITCH TO ERP STATE 1 20 min NUMBER OF AUDIO CHANNELS Stereo 2.0 AUDIO / VIDEO / DATA CONNECTIONS OUTPUT RCA OUT, USB-A Encoding 1x AUDIO / VIDEO / DATA SOURCES LP SUPPORTED AUDIO FORMATS MP3 BATTERY STATUS INDICATOR No BLUETOOTH® TYPE Send BLUETOOTH® COMMERCIAL RANGE Up to 10 metres BLUETOOTH® VERSION 2.1 BLUETOOTH HANDSFREE No FM No DAB No DAB+ No INTERNET RADIO No ANTI SKATING No TURNTABLE TYPE Normal TURNTABLE WITH BLUETOOTH® Yes, streaming to external sound carrier MP3 ENCODING Yes, directly via USB stick MECHANIC ARMLIFT Yes NEEDLE PRESSURE ADJUSTABLE No PITCH CONTROL No TURNTABLE DRIVE TYPE Belt drive AUTOSTOP No AUTORETURN Yes WARRANTY 24 months PRODUCT WEIGHT (KG) 2.50 kilogram RETAIL PACKAGING / SALES UNIT HEIGHT (M) 0.40 meter RETAIL PACKAGING / SALES UNIT WIDTH (M) 0.50 meter RETAIL PACKAGING / SALES UNIT DEPTH (M) 0.15 meter RETAIL PACKAGING / SALES UNIT GROSS WEIGHT (KG) 3.32 kilogram HANDLE No TROLLEY No TOUCHSCREEN No TURNTABLE RPM SPEED 33, 45 SUPPORTED RECORD TYPES 7, 10, 12 PICK-UP SYSTEM TYPE Moving magnet (MMC) PLATTER MATERIAL Plastic PRE AMPLIFIER Yes TURNTABLE WITH SPEAKER(S) No ACCESSORIES TURNTABLES INCLUDED 45 TPM adaptor, AC adaptor, Cleaning cloth, Dust cover, RCA cable, Slip mat

True Balanced Unleash the full power Simply upgrade your X1 B to a MC cartridge, connect it with one of our new True Balanced Phono Cables to your phono preamp and benefit from an interference-free signal with increased dynamics & lower noise level. Mini XLR Output One cable connects it all We offer a wide range of balanced phono cables with different connectors to fit all our phono preamps. If you want to use your X1 B with a Phono Box S3 B you need a „Connect it Phono Mini XLR / Mini XLR“. Balanced A perfect match! Pair your X1 B with one of our new balanced Phono Boxes and benefit from a fully balanced signal transmission to your phonp preamplifier. Check out our new Phono Box S3 B & DS3 B for further information. PRO Balanced NEW Balanced Cartridge Now with pre-adjusted Pick it PRO Balanced cartridge. (Upgrade offer available to all customers who purchased the X1 B with Pick it S2 MM - contact your dealer!) X1b Tonearm 8,6'' Carbon-Aluminium Tonearm Finished as a one-piece, with no resonance-inducing headshell, the X1 is available with premounted high quality Pick it S2 MM cartridge. Its superstiff and perfectly damped construction provides a perfect tracking of the record groove. X1 Motor Motor suspension Stainless steel platter-bearing with soft brass bushing and teflon mirrors together with a new motor suspension for better decoupling of the motor vibrations to tonearm and chassis ensure lowest rumble and noise. Real high-end features. Azimuth & VTA Fully adjustable The X1 comes with fully adjustable Azimuth & VTA. It offers you the possibility to modify your X1 as you want it. Metal Feet Damped & height adjustable The three height adjustable damped aluminium feet guarantee the perfect stand & massively reduce risk of acoustical feedback. 1,5 kg Platter Resonance free acryl The perfect platform to place your precious vinyl records, guaranteeing absolute reliability in its performance and sonic character. 33/45/78 RPM High precision motor control A sophisticated DC/AC generator board generates clean and stable power to drive the motor. Easily change speed with the push of only a single button. Speed 33, 45, 78 (electronic speed change) Principle belt drive Speed variance 33: 0.30% 45: 0.25% Wow & flutter 33: 0.15% 45: 0.13% Platter 20mm thick, 1.5 kg heavy acryl Main bearing stainless steel/brass Tonearm 8,6” carbon/aluminium sandwich Effective arm length 218,5 mm Overhang 18 mm Effective tonearm mass 10,0g Tracking force range 0 - 30mN Included accessories 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat Power consumption 5,0 watts max /< 0.3 watt standby Dimensions 415 x 125 x 335 mm (WxHxD) Weight 7 kg net / 9.5 kg gross weight

At home or on-the-go Mojo and Poly deserve protecting because life happens. It’s all too easy to bump, scrape or drop your devices and if there’s nothing to protect them then you could damage the finish or, even worse, the connection between the two. This is where our hardwearing Mojo and Poly case comes in. Made from durable polycarbonate with a leather wrap and handy lanyard you’ll add an extra layer of security, providing you peace of mind.

Built to protect the award-winning Mojo DAC/headphone amp and Poly wireless streamer/player, the Poly/Mojo leather case offers stylish protection for on-the-go usage. The case has been styled by Chord Electronics’ John Franks and Fumi Higashi San of VanNuys Inc. and is exclusively manufactured by VanNuys Inc. in Tokyo. Luxuriously finished, the Poly/Mojo protective leather case offers a snug fit that perfectly cossets the two devices, offering protection both at home and on the go. The design gives unrestricted access to Poly’s Micro SD card slot, Micro USB charging port, device status indicators and configuration port, plus Mojo’s twin 3.5mm headphone mini-jack outputs and illuminated control/display spheres. Featuring high-quality black-finished leather and contrasting red stitching detail, the official Poly/Mojo protective leather case is crafted to exceptionally high standards. The case offers superior protection for both units if placed into pockets and bags when travelling.

Built to protect Mojo 2 and Poly wireless streamer/player, the Poly/Mojo 2 leather case offers stylish protection for on-the-go usage. The case has been styled by Chord Electronics’ John Franks. Luxuriously finished, the Poly/Mojo 2 protective leather case offers a snug fit that perfectly cossets the two devices, offering protection both at home and on the go. The design gives unrestricted access to Poly’s Micro SD card slot, Micro USB charging port, device status indicators and configuration port, plus Mojo 2’s twin 3.5mm headphone mini-jack outputs and illuminated control/display spheres. Featuring high-quality black-finished leather and contrasting red stitching detail, the official Poly/Mojo 2 protective leather case is crafted to exceptionally high standards. The case offers superior protection for both units if placed into pockets and bags when travelling. Genuine Leather Portable Design Device Protection Dimensions: (W)13.4cm x (H)6.5cm x (D)2.8cm + Strap Length 16cm Weight: 55g w/ strap

Visoka stabilnost. Napravljen od čelika s bazom širine 6, H1 je dizajniran da spreči prevrtanje dok drži do 6,6 kilograma. Silikonska podloga na dnu baze takođe pomaže da se postolje održi čvrsto na mestu. Elegantan dizajn. Tanak čelični okvir H1 zauzima minimalan prostor uz istovremeno osiguravanje dovoljne stabilnosti. Postavite ga bilo gde na radni sto kako bi vam slušalice bile nadohvat ruke.

Dual Cassette Transport The dual twin-head decks can each be used for recording or playback, or can be used together. Recording and playback is supported on both decks. Additionally, TAPE 1 has pitch control and TAPE 2 has an RTZ (Return to Zero: return the counter to 0000) function. Parallel Recording Feature The parallel recording function for TAPE 1 and 2 records audio to both decks simultaneously, creating two tapes with the same source. A master tape and a copy for distribution can be created simultaneously when immediate distribution is needed after recording, skipping the need for duplicating the master tape. USB Recording Output Cassettes can now be recorded and archived to an external USB-capable digital recorder using the 202mkVII USB output. Archive your cassette collection to digital media for playback digitally, or create new recordings using the new microphone mixing function and then transfer them digitally via USB. Recordable Mic Input A front panel microphone input is available and can be mixed with cassette 1 audio and recorded real time to cassette 2 for karaoke or voice over applications. Even connect a musical instrument like guitar, bass, or electronic keyboard and record. A separate microphone input function allows you to control the microphone volume for a perfect vocal (or instrument) mix. One-touch Dubbing Dubbing the contents of one tape to the other is available at the touch of a button. Special Mode In "SPECIAL" playback mode, you can monitor the sound from one tape using headphones while the other tape is playing (outputting from LINE OUT), making it easy to cue another tape. * In "NORMAL" playback mode, as with conventional models, when playing a tape in either system, the sound is output from LINE OUT and PHONES. Features at a glance Dual cassette deck for playing, dubbing, or recording 1 or 2 cassettes USB output for archiving a cassette to an external digital recorder Microphone input with level control can be mixed with cassette 1 and total mix recorded to cassette 2; convenient for karaoke and announcements Headphone jack output with separate level control for audio verification or private monitoring "SPECIAL" playback mode that allows you to cue the next song on a tape by monitoring the sound with headphones while another tape is playing RCA analog unbalanced outputs; stereo RCA input RTZ (Return to Zero) function that returns the tape to the zero count point Repeat playback function ±12% pitch control function (TAPE 1 only) Parallel recording function for TAPE 1/2 that can reduce time for dubbing cassettes Supports recording and playback of normal tapes (Type I) and chrome tapes (Type II) - For metal tapes (Type IV), only playback is supported Dedicated wireless remote control Noise reduction function to reduce hiss during playback (equivalent to Dolby B NR) 3U rack mount design Differences with 202MKVI Noise reduction function added "SPECIAL" PLAY MODE function added PHONES level adjustment function added USB digital output terminal added Dedicated wireless remote control No auto reverse function No continuous recording/playback with Decks 1/2 No high-speed dubbing function Supported OS' Windows Windows 10 (October 2020 Update) , Windows 10 (May 2020 Update) Mac macOS Big Sur

With the Amiron Home Beyerdynamic have further refined the Tesla system with alterations to the driver to exhibit minimal vibrations and eliminate treble resonances. Amiron Home brings you concert-quality sound, combining a very precise bass with transparent mids and pleasantly clear highs. With highly precise sound the Amiron is sure to enthral even the most discerning audiophile. Beyerdynamic have made sure the Amiron Home headphones not only sound stellar, but also create the most comfortable listening space possible. The balanced contact pressure exerted by the headband ensures the Amiron Homeremains securely and very comfortably positioned around your ears. Microvelour headband and earpads are velvety soft enhancing the sense of well-being produced by your favourite music. Focus on your music. Optimised Tesla Technology Modifications to the transducer have diminished unwanted vibrations to an absolute minimum and completely eliminated annoying treble resonances. More precise than ever, the sound tuning will amaze even the most discerning music enthusiasts. High-Resolution Sound Fine-tuned by Beyerdynamic's sound engineers the Amiron creates concert-quality sound with tight bass, transparent midrange and pleasantly clear highs. The precise and clear musical portrait these headphones paint of each and every instrument is sure to delight music lovers. Fully Open Design The open design of the headphones produces a spacious, natural sound, and you feel an incredible closeness and transparency in the music. Escape from your daily routine and let your favourite concert surround you any time you like in your very own haven of tranquillity. Perfect Comfort The balanced contact pressure exerted by the headband ensures the Amiron home remains securely and very comfortably positioned around your ears, while the use of highest-quality Microvelour with temperature-balancing and moisture-regulating effects make listening a pure pleasure. REVIEWS What Hi-Fi? 2017 Award Winner: Best home on-ear headphones £400+ “Beyerdynamic’s Amiron headphones provide an impressive sound that takes the whole frequency range in its stride.” TECHNICAL SPECIFICATIONS Construction: Circumaural (around the ear) Headphone design: Open back Transducer type: Dynamic Headphone impedance: 250Ω Headphone frequency response: 5Hz – 40kHz Sound pressure Level SPL: 102dB Cable: 3m / double-sided / detachable Connectors: Gold-plated mini stereo jack (3.5 mm) / 6.35mm adaptor Weight: 340g FEATURES Tesla technology drivers provide highest level of efficiency High-resolution sound for a concert experience at home Velvety soft Alcantara microfibre and Microvelour headband and earpads Optimum wearing comfort for hours of listening pleasure 3m long cable with 3.5mm jack plug and 6.35mm jack adaptor Double-sided and detachable cable Hand-crafted in Germany PACKAGE INCLUDES Beyerdynamic Amiron Home Open Back Headphones 6.35mm stereo jack adaptor Carry case Brand Beyerdynamic Product Type Headphones Colour Black Feature Keyword Comfortable, Hi-Fi, Open, Over Ear, Over Head, Professional, Studio Recommended Use Hi-Fi, Studio Manufacturer Warranty 2 Years Included Accessories 6.35mm stereo jack adaptor, Carry case Part Number 717525 GTIN 4010118717529 Headphone Fit Type Over Ear Headphones Type Headphones - binaural Cable Entry Dual Sided Cable Length 3m Connector Angle Straight Connector Type Headphones (3.5 mm stereo jack) Detachable Cable Yes Driver Size No Driver Type Dynamic Connectivity Technology Wired Earcup Design Open Back Frequency Response 5Hz – 40kHz Headphones Form Factor Over Ear Headphones Technology Dynamic Impedance 250Ω Number of Drivers Single Driver Sensitivity 102dB Sound Isolation (dB) No Sound Output Mode Stereo Smartphone Compatibility No Smartphone Controls No Total Harmonic Distortion (THD) No Wireless Technology No

ATH-S200BT Music on the move These lightweight, wireless headphones are designed for those who are constantly on the move, with a 40 hour battery life enabling you to experience clear dynamic sound for a whole day on one charge. Handy features, such as built-in controls and a fold flat design, make your listening experience as free and easy as possible. 40 hour battery life Power up your headphones for 40 hours with just one charge Crystal clear sound S200BT contain Audio-Technica's tranducer technology for our clear signature sound No wires, no restrictions S200BT are lightweight, fold flat, and feature Bluetooth® technology, giving you a free easy listening experience Headphones Type Closed-back dynamic Driver Diameter 40 mm Frequency Response 5 - 32,000 Hz Sensitivity 102 dB/mW Impedance 32 ohms

Featuring two aluminum dome tweeters, a pair of 3.5” cast-basket drivers and two 3.5” pressure-coupled Low Bass Radiators, the UIW RSS III produces a uniquely immersive experience that completely envelops listeners in an expansive, 360-degree soundstage. Bipolar Technology for a theater-like presentation Employing Definitive Technology’s fabled Bipolar driver architecture, UIW RSS Bipolar in-wall/ in-ceiling loudspeakers fill the room with a perfect combination of direct and reflected sound for stunning surround effects. Flagship Definitive Technology Drivers for reference loudspeaker performance Ultimate In-Wall Reference Series loudspeakers are designed with the same driver technologies as our flagship floorstanding speakers to deliver an ultra-realistic theater experience that’s all in the family. Dual 1” Pure Aluminum Tweeters The RSSIII aluminum dome tweeters deliver a clear, precise high frequency response. Their ultralight, rigid construction enables them to play significantly higher frequencies than we can hear, providing effortless, distortion-free highs within and beyond the audible range. Rotating Arrays for optimal directivity When RSSIII Bipolar speakers are installed in the ceiling, the driver arrays can be rotated 90° to optimize performance for your listening area. Fully Enclosed for powerful sound where you want it UIW Reference Series loudspeakers are fully enclosed and sealed with dense, acoustically inert, anti-resonant, anti-vibration Medite® wood. With the RSSIII, you’ll hear loud, accurate, uncolored midrange and tight, powerful bass with no buzzing or sound leakage into walls and ceilings. Overall Total Pieces 1 Included Accessories • (1) Wall Mounting Template • (1) Paint Mask • (1) Paintable Grille • (1) Self Adhering Foam Gasket Cabinet Warranty 5 years Drivers Warranty 5 years Carton 1 13.5" (34.29 cm) h x 13.5" (34.29 cm) w x 7.25" (18.42 cm) d - 9 lbs (4.08 kg) IN-WALL SPEAKER Qty Included 1 Availability US Driver Complement • (2) 1" (2.54 cm) d (Round) - Tweeter • (2) 3.5" (8.89 cm) d (Round) - Mid/Woofer • (2) 3.5" (8.89 cm) d (Round) - Bass Radiator Grille Dimensions 11" (27.94 cm) h x 9.44" (23.98 cm) w Shape Rectangle Dimensions 9.88" (25.1 cm) h x 8.31" (21.11 cm) w Shape Rectangle Dimensions 9.88" (25.1 cm) h x 8.31" (21.11 cm) w Audio Inputs Speaker Inputs (1) Pair of Heavy Duty, Spring Loaded Total Frequency Response 40 Hz → 30,000 Hz Nominal Impedance Range 8 ohms → 4 ohms Max Sensitivity (1 watt @ 1 meter) 92 dB A/V Receiver Crossover Settings Small (120 Hz) Recommended Amplifier Power Per Channel 10 watts → 300 watts

80+ Hour Battery Life Charge 20min to Play All Day Ultra-Low Latency Wireless Play confidently with reliable stability and 3X the range versus standard 2.4GHz wireless, keeping you in sync with the action on-screen. Enjoy lossless-quality high-resolution audio with the latest in wirelesstechnology, compatible with LC3plus, LE Audio, and LDAC. Switch seamlessly between multiple devices with Bluetooth Multipoint. Stunning Spatial Audio Experience unparalleled audio with deeply immersive sound from the experts at Dolby Labs. Maxwell for Xbox includes a Dolby Atmos license ready to activate on your device. Download the Dolby Access app to personalize your spatial audio experience. A.I. Noise Filtering Microphones Get crystal-clear communications from Audeze's FILTER noise reduction technology. Using a dedicated A.I. processor, background noise is removed instantly and automatically on any platform. The detachable boom microphone and on-board beamforming array make sure your voice is always heard. Audio Style Over-ear (circumaural), closed-back Transducer type Planar Magnetic Magnetic structure Fluxor™ magnet array Phase management Fazor™ Magnet type Neodymium N50 Diaphragm type Ultra-Thin Uniforce™ Transducer size 90 mm Maximum SPL >120dB Frequency response 10Hz - 50kHz THD <0.1% (@ 1 kHz, 1mW) Spatial Audio Dolby Atmos® (Xbox Version) Tempest 3D (PlayStation Version) Weight 490g Microphones Boom Microphone Detachable, Hypercardioid Beamforming Physical and AI noise reduction, Internal mic for chat Power Battery type Lithium-polymer, 1800mAh Battery life Over 80 hrs wireless playback @ 80dBA Fast charge USB-C, 5v 1.8 Amp max - 25% charge / 20min (Full charge 2hr) Connection Wireless Ultra-low-latency Bluetooth: 5.3 Supports: Multipoint, LE Audio, LC3, LC3plus, LDAC, AAC, SBC Wired - Digital USB-C with dual-audio endpoints and game-chat mix Wired - Analog 3.5mm TRRS active Warranty 1 year

Wharfedale’s iconic Diamond lineage of high-performance, high-value speakers sparkles brighter than ever with the all-new Diamond 12 Series Since 1982, Wharfedale’s famous Diamond speakers have served as the classic entry point to true high-fidelity sound, their exceptional sonic value for money earning numerous ‘product of the year’ accolades in the UK and around the world. This autumn, with the introduction of the all-new Diamond 12 Series, Wharfedale once again raises the bar for affordable, high-performance loudspeakers. To develop the new range, Wharfedale has collaborated with world-renowned speaker designer Karl-Heinz Fink for the first time. Fink’s track record of delivering class-leading sound from modestly priced speakers is exceptional and with the Diamond 12 Series, he and Wharfedale’s team of acoustic engineers have achieved a new entry-level benchmark. Wharfedale determined that the Diamond 12 Series should be an opportunity to start afresh. A challenge was issued to Mr Fink: how much sonic performance can you wring from a range of speakers at classic Diamond price points? And so, he and Wharfedale’s team set to work, delivering clean-sheet designs without a single part unaltered from the outgoing – and more costly – Diamond 11 Series. Klarity – The Difference is Clear Since the Diamond 8 Series in 2001, Wharfedale has made the mid/bass cones for every Diamond generation from Kevlar. 19 years and many award-wining ranges later, Wharfedale has developed a new composite called Klarity™. The chief ingredient of Klarity™ is polypropylene, a material that has been used to make speaker cones since the BBC researched its use for this purpose in the 1970s. Polypropylene cones are renowned for their characteristically low distortion and controlled ‘breakup’, as well as their resistance to moisture in the air. They also have a reputation in some quarters for sounding a little ‘unexciting’ – a perception that is largely the result of mediocre engineering. When designed and implemented optimally, polypropylene cones can sound enthralling. Bass/Mid Drivers – Cone Surround, Magnet and Voice Coil In the past, polypropylene cones have often been combined with high-damping surrounds to achieve a smooth response curve. However, the hysteresis of these surrounds can restrict dynamics and make bass sound a little ‘soft’. For the Diamond 12 Series, the aim was to combine the Klarity™ cone with a low-damping surround, thereby achieving both low colouration and expressive dynamics. This was not a simple task but, by simulating many different cone shapes and adding ribs to provide further stiffening, a flat response curve was achieved without resorting to a high-damping surround, thereby striking the ideal balance. The Klarity™ diaphragms are driven by a substantial, precision-made magnet system with an aluminium compensation ring to minimise the effect of variations in inductance as the voice coil travels. This contributes to an absence of distortion and intermodulation generated by the motor system. The voice coil is wound on a high-power epoxy/glass fibre bobbin – highly unusual in speakers at this price level. This has the advantage of not adding eddy currents and delivering greater power handling than an aluminium bobbin, whilst also being much stiffer than the Kapton type. Treble Unit and Crossover The Diamond 12 Series’ treble unit sports a 25mm dome made from a woven polyester film with a high-loss coating to deliver open and smoothly extended high frequencies. The magnet system and the front plate have been optimised for wide dispersion and uncompressed behaviour. The front plate is flat and exposes the dome as much as possible, with a short duct to balance the acoustic load and improve the SPL (sound pressure level) measurement. The treble unit combines seamlessly with the mid/bass driver via a crossover network using an acoustic LKR 24dB topology. This includes air core inductors of the type more commonly found in high-end speakers, selected because they produce the lowest distortion of all inductor types. As the resistance of the coil is higher than a standard laminated steel or ferrite core inductor, the magnetic structure of the mid/bass driver has been modified to compensate, resulting in fast, clean bass with no distortion from the inductor. Cabinet Construction The cabinet is a critical part of any high-performance loudspeaker. At entry-level price points, corners are often cut to constrain cost, but this is a mistake; no matter how good the drive units, their performance will be wasted if the cabinet’s construction is suboptimal. For this reason, Diamond 12 Series speakers feature cabinets constructed with a level of sophistication usually reserved for much more expensive designs. The rear-ported enclosure of each model is precisely sized so that the internal volume works in harmony with the drive unit system to deliver the desired sonic result. The cabinet walls are made from sections of wood fibre board of varying thickness, constructed in such a way as to subdue the identifiable characteristics of the cabinet’s ‘sound’ and ensure the drivers’ output remains unsullied. The resonant properties of each element – even the glue – were considered to determine the ideal combination of materials and placement. Inside the cabinet, Intelligent Spot Bracing connects opposing walls with a specific form of wood brace to achieve optimal reduction of cabinet resonance. These braces are precisely modelled by computer simulation to improve upon the commonplace ‘figure of eight’ brace, which can have the effect of transferring resonance from one wall to another. Speaker type 2.5-way floorstanding speaker Enclosure type Bass reflex Treble driver 25mm textile dome Mid/bass driver 130mm Klarity™ composite Dedicated bass driver 130mm Klarity™ composite Sensitivity (2.83v @ 1m) 89dB Recommended amp power 30-150W Peak SPL 102dB Nominal impedance 8Ω compatible Minimum impedance 5Ω Frequency response (+/-3dB) 45Hz-20kHz Bass extension (-6dB) 40Hz Crossover frequency 2.2kHz Dimensions (HxWxD) 975x180x320mm Weight (each) 19.5kg

Fusing Technics’ traditional analog and digital technologies, the SL-1200GR2 is the new standard in direct drive turntable systems. With a revolutionary new drive control method for smooth, accurate rotational stability and a new power supply for an exceptionally low noise floor the new generation turntable outperforms the usual standards of its class, for rich, robust sounds and true high-fidelity listening. Coreless direct drive motor achieving stable rotation Low-noise, low-voltage power circuit and a switching power supply ΔΣ-Drive suppresses vibrations from the motor for smoother, more accurate rotation Tonearm achieving high initial-motion sensitivity Two-layer platter with high rigidity and vibration damping High-rigidity body and high-damping silicon insulators for smooth sound and isolation from various vibrations The First Stage of The New Generation of Technics’ Direct Drive Turntables Since inventing the world’s first direct drive turntable, Technics has continued to work to improve sound quality. It has now developed the ΔΣ-Drive, which suppresses minute vibrations from the motor and improves the electromagnetic conversion accuracy of the cartridge. The first stage of direct drive turntable systems featuring this technology is the SL-1200GR2. New Motor-Drive System, ΔΣ-Drive (Delta Sigma Drive) The ΔΣ-Drive is a new system that applies Technics’ expertise in PWM signal processing. In addition to reducing high harmonics, the new drive suppresses vibrations from the motor for smoother, more accurate rotation, ensuring a rich reproduction of the music. Coreless Direct-Drive Motor Achieving Stable Rotation In 1970, Technics commercialised the world‘s first direct drive turntable, and the system took the world by storm. Unlike belt drive and other systems, direct drive systems rotate the motor at low speed and directly drive the platter, thus providing numerous advantages, such as the almost complete absence of degradation in S/N ratio due to motor vibration and deceleration mechanisms, as well as high reliability over a long period time because of not requiring parts replacement. And in 2016, Technics developed the twin-rotor, surface-facing, coreless direct drive motor with rotor magnets placed on both sides, thereby eliminating the rotation irregularity of the motor, referred to as "cogging," which was a unique issue for direct drive systems. This motor was adopted for the SL-1200G, which once again drew a significant response in the hi-fi market. The SL-1200GR2 inherits the same design philosophy with the new development of a single-rotor, surface-facing, coreless direct drive motor, resulting in the elimination of cogging. Pursuing Rigidity and Vibration Damping Characteristics The platter achieves high rigidity and vibration damping characteristics by using a two-layer construction with deadening rubber applied to the entire rear surface of the aluminum die-cast to eliminate the unnecessary resonance that is otherwise relayed to the record, thereby producing clear sound. To increase the inertial mass and reduce vibration, the shape of the aluminum die-cast portion was optimized by simulation. At 2.5 kg (including the rubber mat), the SL-1200GR2 platter is 0.8 kg heavier than that of the previous SL-1200MK5. Also, the back surface of the platter has strengthening ribs added to improve rigidity. Increasing the surface area of contact with the deadening rubber achieves damping characteristics that are more than twice those of the SL-1200MK5. Tonearm Achieving High Initial-Motion Sensitivity The tonearm tracks the rotation of the record and enables reading with high precision, and the tonearm inherited by Technics is the traditionally used static-balance universal S-shaped tonearm, employing an aluminium pipe with excellent light weight and rigidity for the material of the tonearm pipe. With its gimbal suspension construction, the tonearm bearing section uses a cut-processed housing that employs high-precision bearings, as in the SL-1200G and SL-1200GR. The high initial-motion sensitivity of 5 mg or less is achieved through manual assembly and adjustment by skilled Japanese artisans. This enables the grooves etched into the records to be accurately traced. In addition, one type of auxiliary weight comes included, and the cartridge can be swapped with a variety of other cartridges to match the music genre or feeling. (Applicable cartridge weight when using the supplied auxiliary weight: 10 - 16.4 g (not including the supplied head shell) Low-Noise Switching Circuit Use of a high-speed switching power supply ensures a stable supply capacity and less ripple and humming. Applying a switching power supply to a turntable eliminates the need for a large transformer and countermeasures for the ensuing mechanical vibrations. A switching frequency of above 100 kHz limits the impact of noise on the music playback bandwidth. Current Injection Active Noise Cancelling This technology combines a noise detection device with an error amplifier. It detects residual noise in the power supply and applies an inverse phase current to remove noise components. It removes low frequency noise more effectively than a regulator to ensure a more ideal power supply. Two-layered Cabinet Construction The SL-1200GR2 ensures high rigidity by using a body with a two-layered construction that solidly unifies the BMC and the aluminum die-cast chassis. High-dampening Silicone Insulators For the insulators supporting the body, the SL-1200GR2 uses special silicon rubber that ensures high vibration damping characteristics and long-term reliability. High-Quality Terminals The turntable uses gold-plated phono terminals for detachable cables, while metal shielding construction inside the case reduces the effects of external noise. Power Supply AC220-240 V, 50/60 Hz Power Consumption 11 W, Approx. 0.3 W (Standby) Dimensions (W x H x D) 453 x 173 x 372 mm (17-27/32 × 6-13/16 × 14-21/32 in) Weight Approx. 11.5 kg (Approx. 25.35 lbs) Accessories Turntable, Turntable sheet, Dust cover, EP record adaptor, Balance weight, Auxiliary weight, Cartridge spacer Head shell, Overhang gauge, Screw set for cartridge, PHONO cable, PHONO earth lead, AC power supply cord, Owner's Manual Operating Humidity Range 35% to 80% RH (no condensation) Terminals Audio Output PHONO (Pin Jack) x 1, EARTH TERMINAL x 1 Tonearm Section Type Static Balance Effective Length 230 mm (9-1/16") Overhang 15 mm (19/32") Tracking Error Angle Within 2° 32' (at the outer groove of 30 cm record), Within 0° 32' (at the inner groove of 30 cm record) Offset Angle 22° Arm-height Adjustment Range 0 - 6 mm Stylus Pressure Adjustment Range 0 - 4 g (Direct Reading) Head Shell Weight Approx. 7.6 g Applicable Cartridge Weight Range (without auxiliary weight) 5.6 - 12.0 g; 14.3 - 20.7 g (including head shell) (with auxiliary weight) 10.0 - 16.4 g; 18.7 - 25.1 g (including head shell) Cartridge Mounting Dimension JIS 12.7 mm (1/2") interval Head Shell Terminal Lug 1.2 mmφ 4-pin terminal lug Turntable Section Type Direct Drive Turntable Turntable Speeds 33-1/3, 45 and 78 r/min Adjust Range ±8 %, ±16 % Starting Torque 2.2 kg-cm Build-up Characteristics 0.7 s. from Standstill to 33-1/3 r/min Wow And Flutter 0.025 % W.R.M.S. Braking System Electronic brake Turntable Platter Aluminium diecast, Diameter: 332 mm, Weight: Approx. 2.5 kg (5.51 lb) (Including rubber sheet)

FWD, The Netherlands, February 2022 FWD NP5 Prisma MK2 Review NP5 Prisma MK2: Primare NP5 MK2 – Durable Expansion The Primare NP5 MK2 is a very specific type of device that can be useful in a number of situations. To breathe new... View full review HIFI & Musik, March 2022, Sweden HIFI & Musik NP5 Prisma MK2 “Great buy” review “Primare NP5 is the network player for you who want to stream music without problems, and already have a D / A converter in the system. It’s hard not to recommend this... View/download full review as PDF Stereo+, January 2022, Norway Stereo+ Årets Product NP5 Prisma “NP5 Prisma MK2 sounds open and precise, and not least analog and smooth. The tends to be a good sign that the device is in control of noise, jitter and analog noise... View/download full review as PDF Stereo+, Norway, December 2021 NP5 Prisma MK2 – Stereo+ awards it 5 Stars – Highly Recommended! “Instead of pushing a DAC and an analog output section into the device as most others have done, absolutely all the money has gone to make as good a streamer as... View/download full review as PDF HiFi+, UK, October 2021 HiFi+ Innovation Award 2021 Primare have received an Innovation award from HiFi+ with the following citation: “First founded in 1985 by industrial designer Bo Christensen, Primare’s is perhaps one of the most recognisably Scandinavian brands in... View/download full review as PDF Hificlass, Poland, June 2020 NP5 Prisma: Primare NP5 Prisma “If anyone is planning to upgrade their system with network functionalities, then they should consider the Primare proposal. With a good DAC, NP5 Prisma transport is able to offer the sound that... View full review Audio PL, March 2020 NP5 Prisma: Streaming Different “Ease of use, Chromecast, Bluetooth, AirPlay 2 and compatibility with Roon create very large functional possibilities, and the natural, almost “analog” sound – obtained even from lower quality streaming services – is... View/download full review as PDF Le Blog d'Eric, France, April 2020 NP5 Prisma: NP5 “The Primare NP5 is a HiFi streamer with three essential qualities. It integrates perfectly with any existing system thanks to its tiny format and digital outputs. It is universal in its operation... View full review Qobuz Magazine, France, April 2020 NP5 Prisma: test of a mini network player that knows how to do the maximum “The Primare NP5 Prisma is fast becoming a staple in the world of small, accessible network players. Its universality with the support of Chromecast for Android and AirPlay 2 for iOS already... View full review ON-MAG, France, May 2020 NP5 Prisma: an ultra-complete Chromecast, AirPlay 2 and Roon mini streamer “NP5 fulfils several offices. First of all, it will allow users of Primare products from previous generations to easily update their amplifier or preamplifier by providing them with the connected function thanks... View full review Alpha Audio, The Netherlands, October 2019 NP5 Prisma: Primare Prisma NP5 compact network player “The new Primare Prisma NP5 is a network player intended to be easily integrated into any existing hi-fi system. Your installation is immediately up to date. The Primare Prisma NP5 is an... View full review Key features Stream hundreds of music services from the internet using familiar apps and devices, including high resolution platforms like Qobuz, Spotify, and Tidal HiFi Full device optimisation and control of network connected hard drives with the Prisma application Advanced control options including digital output configuration, voice control, and sophisticated media management software with Roon Control of volume, mute, standby, and input selection of previous Primare models with RS232 connection Prisma – network player and multi-room technology The Prisma technology bundle was created to allow everyone in the household to explore, discover, and share the deeply satisfying experience of high-performance music playback – providing multi-room/multi-zone connectivity and control of stored and streamed media, whether wired or wireless, all managed from mobile devices with familiar streaming apps and a dedicated system control app. Our design philosophy Primare products embody the Scandinavian design ideal of lagom – that sense of not too much or too little, but just right; everything in balance, proportion, and harmony. What are the differences between the original NP5 Prisma and the NP5 Prisma MK2 versions? he NP5 Prisma MK2 network player is the latest evolution of Primare’s popular NP5 Prisma, a clever little device that provides complete Prisma network player control and connectivity technology to virtually any system with a digital input. The development of the new model was necessitated primarily by the AKM chip factory fire, causing long-term disruption of the supply of the critical re-clocking chip at the heart of the NP5 Prisma design that allowed for the selection of output sampling frequencies. To continue to make available one of our most popular models with the minimum of interruption, we have sourced a readily available SRC chip and redesigned the circuit to maintain the performance of the original NP5 Prisma while allowing for: · DoP (DSD over PCM) output as an available setting option when using Roon Ready and a DoP ready DAC. · MQA passthrough allowing for Tidal Master and MQA files from a NAS to passthrough for higher resolution processing by a connected MQA capable DAC. All other features and functionality remain the same as in the original version, with connection and control features that include AirPlay 2, Bluetooth, Chromecast built-in, Roon Ready, Spotify Connect (including Spotify HiFi when launched), and a host of other features – making the NP5 Prisma MK2 more than ever the network player for everyone. All future updates will be applicable to both the original NP5 Prisma and the new NP5 Prisma MK2 models, including much anticipated playback of Tidal Master files and Qobuz at full 24/192 kHz resolution. RCA1 x digital output Toslink1 x digital output RS232 outboard system control port Prisma connectivity and control USB-Ax 1 Ethernetx 1 WiFi AirPlay 2 Bluetooth Chromecast built-in Roon Ready Spotify Connect Dimensions143 x 36 mm x 125 (WHD) Weight.5 Kg

U paketu dolazi i visoko kvalitetni Audio-Technica kertridž! Podesiva brzina – izaberite između 33 i 45 obrtaja u minutu, za vaše long-plej ploče ili singlice. Za „tihe“ (prostorne) uslove – povežite vaše slušalice i individualno uživajte u zvuku vinila. Remenski pogon (kaiš), poklopac za zaštitu od prašine, pitch kontrola (brzine). GARANCIJA 24 meseca VISINA 19.2 cm ŠIRINA 42.5 cm DUBINA 37 cm BOJA Crna MATERIJAL Metal, plastika, veštačka koža SIGNAL ZVUKA / broj audio kanala Stereo 2.0 IZVORI AUDIO / VIDEO / PODATAKA LP & singl ploče, Bluetooth, Line A/V ulazi AUX In 3.5 mm, MIC In 3.5 mm A/V izlazi RCA Out 3.5 mm, DC 3.5 mm MP3 prenos Ne ANTI SKATING Ne GRAMOFON SA ZVUČNICIMA Da PRETPOJAČALO Ne TIP POGONA Remenski (kaiš) TIP PICK-UP SISTEMA Pokretni magnet (MMC) UKLJUČENA GRAMOFONSKA OPREMA 45 RPM (7”) adapter, AC adapter, krpica za čišćenje, protivteg, MMC kertridž (igla), poklopac protiv prašine, slip mat MATERIJAL tanjira Aluminijum BLUETOOTH (verzija 5) Da, risiver – do 10 m udaljenosti BRZINA/BROJ OBRTAJA 33, 45 PODRŽANI TIPOVI PLOČA 7”, 10”, 12” PODESIVI PRITISAK IGLE Da AUTOSTOP Ne AUTORETURN Ne PITCH KONTROLA Da Mehaničko podizanje ručice Da TEŽINA PROIZVODA (KG) 5.8 kg Ulazna snaga 100-240 V Frekvencija 50-60 Hz MAINS ADAPTER OUTPUT VOLTAGE 12 V MAINS ADAPTER OUTPUT CURRENT 1.5 A MAINS ADAPTER OUTPUT POWER 18 W MAX. izlazna snaga (uređaja) 50 W

What Hi-Fi? 5 stars " Aesthetically, the 6000N Play is as unassuming as hi-fi streamers come, with a screen-less, largely unadorned chassis that gives nothing of its vast network talents away. But behind that modest façade, the 6000N Play has every right to exude an air of quiet confidence. It arrives as the third component in its mid-range 6000 Series, following the five-star 6000A integrated amplifier and the 6000CDT CD transport, borrowing tech and features from both of its slightly older siblings. " reedom of Choice DTS Play-Fi is premium whole-home wireless audio, now available from the largest ecosystem of brands in the world. Stream your favourite content with astounding audio quality, from every device that you've got. Every single DTS Play-Fi product works perfectly with all the rest, regardless of brand, so you get a huge range of options to customize your home. Music Presets Our music presets are just like the presets in your car. Hold down to set, press once to start playback. Easy. Now you can store stations and playlists from compatible streaming services to buttons on your product for quick access whenever you need it. Enjoying music couldn't be easier. Critical Listening Want to sit down in a specific room and appreciate the fine subtleties of your high resolution audio collection? DTS Play-Fi has you covered. Critical Listening mode allows you to send your high resolution audio files to your premium DTS Play-Fi product with no trans-coding or down-sampling, no wires necessary. A/V Synchronisation No longer do you need to suffer through the tiny speakers of your laptop or tablet when watching videos or YouTube. With the DTS Play-Fi app for Windows, turn on Video mode, and send the audio to the nearest DTS Play-Fi product to enjoy your video with premium sound wirelessly A/V synchronised. An Endless Supply of Music The 6000N with DTS Play-Fi comes with a wealth of music options from around the globe. Spotify, Pandora, Deezer, Napster, KKBox and Sirius XM, to name a few. Browse a radio guide with thousands of stations and podcasts, or stream from a home media server. Wi-Fi Technology - DTS Play-Fi streams music over standard Wi-Fi networks, delivering perfectly synchronized audio, with no lag and zero loss in sound quality. Easy Setup - No logins, no complicated computer-based setups. Just download the app and within minutes, you’re ready to listen. Lossless Audio Streaming - Stream in 24-bit/192kHz with compatible streaming services and files formats. ESS Sabre32 ES9018K2M Reference DAC - The inclusion of a DAC stage ensures the 6000N Play can be used with any audio system. Digital Section Digital Output Level 500 +/- 50mVpp Output Impedance 75 Ohm Maximum Resolution 192kHz/24bit Digital Output 1 x Coaxial , 1 x Optical D to A Converter Variable Output Voltage 0 – 2.1V DAC ES9018K2M Frequency Response +/-0.5dB(20Hz-20kHz,ref.1kHz) Total Harmonic Distortion (THD) <0.003% (1kHz @0dBFS , BW=20-20kHz) General Signal-to-noise Ratio (S/N) >115dB(A-Weighted) Analogue Output Impedance 100 Ohm Standby Power Consumption <0.5W Requirements (Depending on Region) 220V—240V~50/60Hz 100V—120V~50/60Hz Dimensions (LxWxH) 445mm x 313mm x 65.5mm Net Weight 4.9kg

Powerful Slatefiber Drivers The Focal Theva N°3 speakers are equipped with two 6.5-inch Slatefibass woofers that deliver a room-filling bass. The Slatefiber 6.5 mid-range brings out every little detail in the vocals and creates a balanced, irresistible sound. With their recycled non-woven carbon fibre design, the Slatefiber cones transmit a premium acoustic performance. But it doesn't stop there! The thermoplastic polymer material will ensure world-class sound velocity and damping. Thanks to a sensitivity of 91dB and a bandwidth of 48Hz – 28kHz, you can get immersed in a powerful sound that will make any music come alive. High-Performing TNF Tweeter Made from aluminium/magnesium, the 1-inch inverted dome TNF tweeter offers stable driver positioning and limits any unwanted distortion. The N°3 speakers are harnessed with Poron suspension, a shape memory material that helps to sharpen up the sound and generate a soft treble output. The frequency response has a variance of +/-0.5dB, which ensures that the intricate, high frequencies can be clearly heard from any part of the room. Stylish Design The included speaker stands supply high-quality Time Alignment, which focuses the sound on the listener. This tilt of the stands allows for an optimal soundstage, that will make any music sound like it’s being performed live. With an additional front panel, sleek black or wood finishes, and magnetic grilles, the N°3 speakers supply an irresistible visual appeal that elevates your living space. The rear-ported bass-reflex design dispenses an opulent bass response with little to no distortion. These speakers are a must-have for any avid audiophile. Key Features Two 6.5-inch Slatefibass woofers create an impactful, deep sound that immerses you in your entertainment Slatefiber 6.5 mid-range adds precise detail and depth to transmit a clear sound Slatefiber cone design offers a premium acoustic performance 1-inch inverted dome TNF tweeter enhances the high frequencies to produce a room-filling sound 91dB sensitivity and 48Hz – 28kHz frequency response create a versatile, wide-reaching sound range that elevates any entertainment genre The included speaker stands enable high-class Time alignment which allows the sound to focus on the listener Additional front panels and magnetic grilles ensure optimal convenience and offer effective driver protection Bass reflex design produces an excellent bass response Type Bass-reflex 3-way floor-standing loudspeaker Speaker drivers 2 x 6.5" (16.5cm) Slatefiber bass 6.5" (16.5cm) Slatefiber midrange 1" (25mm) Al/Mg inverted dome TNF tweeter (per speaker) Sensitivity 91dB Bandwidth 48Hz – 28kHz Low-frequency cut-off 39Hz Nominal impedance 8 Ω Minimal impedance 2.9 Ω Recommended amp power 40 – 250W Crossover frequency 270Hz / 2700Hz Dimensions (H x W x D) 98.9 x 21.2 x 38.8cm Net weight (with grille) 20kg (per speaker) Box dimensions (H x W x D) 34 x 48 x 110cm Net weight (with packaging) 24.5kg (per speaker)

AVForums Highly Recommend "Tight, powerful, natural and fast, this subwoofer really delivers on all levels" Home Cinema Choice Best Buy! "Smaller in stature and output than the PB16, but still a stonking performer that's speedier and sounds more controlled. And it's more affordable, too." One Subwoofer to Rule Them All. Introducing the SB16-Ultra. An unrelenting passion for awesome bass performance and engineering perfection guided every aspect of the SB16-Ultra subwoofer’s design. Groundbreaking technology, rigorous design and extreme testing in real world and laboratory environments allowed SVS to achieve massive output levels, extreme low frequency extension, near-perfect frequency response accuracy, and pinpoint transient response. The culmination of all SVS design advancements, SB16-Ultra represents the greatest leap forward in performance and innovation since the inception of subwoofers. Masterful Engineering. 3 Game-Changing Subwoofer Innovations. One of these groundbreaking innovations would’ve been enough to make the 16-Ultra Series an engineering tour-de-force, but the combination of 3 subwoofer firsts propels the SVS SB16-Ultra into the pantheon of all-time great audio products. Massive New 16-inch SVS Ultra Driver with Unprecedented 8-inch Edge Wound Voice Coil. When designing the biggest and most formidable driver ever used in an SVS subwoofer, it was of utmost importance to meet or exceed the same supreme standards of control and accuracy as every other subwoofer SVS manufactures. One huge advancement that allows the SB16-Ultra to handle the crushing force of a 16-inch driver is the 8-inch edge wound voice coil, the largest ever deployed in a consumer subwoofer. This innovation ensures ultra-low distortion, efficient heat dissipation, exceptional linearity and nearly zero power compression. By nature, larger drivers are more difficult to control, but the unprecedented voice coil design ensures accuracy in frequency response and speed in transients without ever sounding boomy. Pushing the driver are four massive, dedicated toroidal ferrite magnets that unleash a staggering 78mm peak to peak excursion and the highest levels of motor force and palpable SPLs. The light and rigid 16-inch Ultra driver cone consists of a premium fiberglass resin composite with optimal stiffness to mass ratio to maximize movement of air and sonic energy without ever distorting or losing control. Stunningly Powerful, New Sledge Amplifier with Fully Discrete MOSFET Output and 1,500 Watts Continuous, 5,000+ Watts Peak Power. Conservatively rated at 1,500 watts continuous, 5,000+ watts peak power, the SB16-Ultra Sledge STA-1500D amplifier’s 64 Amp 200-Volt MOSFETs are the sonic muscle behind arguably the most powerful and highest fidelity subwoofer amplifier ever developed. Discrete MOSFET output results in superior handling and tighter control of the immense amplifier power and represents a major upgrade over the integrated circuits found in nearly all other Class D subwoofers. Effortless power must be harnessed to ensure refined behavior and pristine output at the most demanding drive levels. To achieve this, the SB16-Ultra subwoofer uses the audio industry’s most advanced 50 Mhz Analog Devices Audio DSP with 56bit filtering to handle the nearly limitless power, only unleashing the perfect amount of low frequency energy at just the right time. Innovative New Smartphone App for Subwoofer DSP and Control. Compatible with Apple® and Android® platforms, the innovative SB16-Ultra smartphone app unleashes the full depth, force and nuance of the world’s finest subwoofer. The groundbreaking SVS subwoofer app controls all DSP functions and conveniently stores custom presets. It’s the easiest way ever to fine tune bass surpassing 16Hz at reference volumes from the comfort of your favorite seat. For added convenience, 2-way feedback shows updates in real time on both the app and subwoofer interface and Bluetooth connectivity allows adjustments to be made even when the subwoofer is not in sight. Control is also available via IR remote and an intuitive front panel display. Google Play and the Google Play logo are trademarks of Google Inc. Acoustically Inert, Rigidly Braced Cabinet A subwoofer capable of creating such extreme levels of sonic energy requires an equally robust cabinet design. The SB16-Ultra is built with a double thick MDF front baffle and rigid internal bracing to support the massive drive unit and to ensure an acoustically inert environment. The highly reinforced internal design eliminates any chance of coloration or resonance from the cabinet, even when the deepest low frequencies are played at reference sound pressure levels. SVS Subwoofer Design Philosophy Cabinet Type Forward Firing Sealed Finish Black Oak Inputs Low Level / Line Level RCA / Balanced XLR Outputs Line Level RCA / Balanced XLR Driver SVS 16” Ultra Driver Amplification Sledge STA-1500D Discrete Mofset DSP Amplifier Power 1500 Watts RMS (5kw peak) Frequency Response 16-460 Hz +/- 3dB Dimensions w/grille (H x W x D) 508mm x 495mm x 582mm Boxed Dimensions (H x W x D) 650mm x 700mm x 800mm Weight 55.3Kg

Veliki zvuk, male dimenzije Kao što mu ime kaže, iLoud je mnogo glasniji od prosečnog prenosnog Bluetooth zvučnika. Sa punih 40 W zvučne snage, iLoud zvuči 2-3 puta glasnije od zvučnika uporedne veličine. Omogućava bogatiji i snažniji zvuk za bilo koju vrstu muzičkog stila, od rocka do hip-hopa do elektronske muzike i šire. Omogućava vam da reprodukujete svoju muziku - u svakoj mogućoj situaciji u mobilnom telefonu - tačno onoliko koliko biste i u udobnosti svog studija. Godine pro-audio iskustva i inovativna inženjerska rešenja doprineli su našoj sposobnosti da proizvedemo ovaj moćan zvučnik u tako malom kućištu. Kvalitet zvuka i vernost iLouda apsolutno će vas iznenaditi. Glasan i jasan Ako je prva stvar koju ćete primetiti kod iLoud-a njegova glasnoća, druga stvar koju ćete primetiti je kako jasno zvuči. Njegov visokokvalitetni studijski zvuk je daleko izvan onoga što možete dobiti od konvencionalnih prenosnih Bluetooth zvučnika. Zahvaljujući vremenski usklađenom dvosistemskom sistemu, preciznim prilagođenim neodim zvučnicima, podešenim bas-refleksom, nerezonantnim kućištem i DSP obradom, iLoud nudi ultra-tačan frekvencijski odziv, izvanredan odziv basa i stereo snimke koje ne možete pronaći ni u jednom drugom prenosivom Bluetooth zvučnik. Pomoću iLouda možete biti sigurni da će se bilo koja vrsta muzike reprodukovati sa tačnošću koja se obično nalazi samo na visokokvalitetnim studijskim monitorima. Čak i veoma zahtevne teksture zvuka kakve nalazite u klasičnoj, jazz i akustičnoj muzici zaživeće s preciznošću i muzikalnošću kakve nikada ranije niste čuli od zvučnika ove veličine. Uključite i svirajte Evo gde postaje zanimljivo. Uzmite gitaru i uključite je u iLoud, priključite mobilni uređaj, pokrenite omiljenu mobilnu aplikaciju poput AmpliTube ili VocaLive i počnite da snimate. iLoud sadrži ugrađeni iRig sklop za direktno povezivanje gitare ili dinamički mikrofon koji vam omogućava da iskoristite realnu obradu zvuka svojih omiljenih mobilnih aplikacija. Ultra prenosivost iLoud možda nudi veliki zvuk i vernost vrhunskog sistema, ali njegovo malo kućište osigurava da ga možete lako nositi bilo gde u torbi za laptop ili u ruksaku. Ima ukupne dimenzije iPada, dubok je samo 6 cm i ima nagnut oblik za optimalno slušanje na radnoj površini. Zahvaljujući dugotrajnoj bateriji, iLoud je idealan zvučnik koji će mobilni muzičari poneti sa sobom bilo da komponuju, snimaju ili jednostavno žele da slušaju visokokvalitetnu muziku bilo kada i bilo gde. U torbi Da biste zaštitili svoj iLoud dok ga nosite oko sebe, možete naručiti putnu torbu iLoud, izdržljivu, 100% poliestersku futrolu sa ugrađenim iLoud logotipom, podesivim kaiševima i torbicom sa zatvaračem za kablove i drugim sitnicama. Veličina: 11.8" (30cm) x 7.8" (20cm) x 5.5" (14cm) Obogatite svoj život bežičnom čistoćom iLoud je dizajniran imajući na umu zahteve muzičara. Kvalitet zvuka je toliko dobar da ga možete koristiti za pravljenje muzike - samo zamislite koliko dobro zvuči kada ga koristite kao prenosni bežični sistem zvučnika. Pruža vam pogodnost bežične veze i performanse hi-fi zvučnika - nudeći vrhunsko iskustvo slušanja kod kuće, sa prijateljima ili u pokretu. Karakteristike 40 W ukupne muzičke snage - dvostruko više od zvučnika slične veličine Vrhunski odziv basa i preciznost zvuka Bluetooth i stereo analogni linijski ulaz Baterija se napaja uobičajenom upotrebom od 10 sati i automatskim režimom pripravnosti iRig® ulaz za gitare i dinamičke mikrofone za iPhone / iPad obradu Visoko prenosiv - lako se uklapa u torbu za laptop ili ranac Idealno za reprodukciju muzike i stvaranje muzike

IsoAcoustics Inc. is pleased to introduce the next evolution of our specialized line of speaker stands for the audio professional, music hobbyist, audiophile, and music lover. The new ISO Series of speaker stands provide superior acoustic isolation and enhance the sound clarity of any speakers including studio monitors, home theatre systems and sound reinforcement. With a lower profile and new contemporary design, the ISO Series of stands positions your studio closer to the supporting surface or meter bridge, and the new redesigned isolators moves the acoustic performance another step forward. IsoAcoustics ISO Series speaker stands are built with a unique, patented isolation technology that provides a high degree of isolations and manages the speaker’s energy to deliver authentic, uncoloured sound. This next generation of speaker stands effectively eliminates energy transfer into the supporting surfaces. Bass becomes tighter, overall imaging is enhanced and your speakers are enabled to perform to their full potential. Following the same design philosophy as the ISO-L8R Series, these isolation stands provide 14 variations of height and tilt adjustment to optimize the placement and performance of studio monitors by getting the tweeters in the correct alignment with the listening position. Whether you’re a pro mixing in the studio – a musician creating in a home project environment – or an audiophile who appreciates every nuance of music and sound – you’ll hear and appreciate the difference with the ISO Series speaker stands. It’s simply the best investment you can make for superior audio. IsoAcoustics ISO-200 Sub Subwoofer Stand Features: Lets you properly position and isolate your subwoofer for more accurate performance Oversize design accommodates large subs, use two for extra-large units Better focus and deeper, tighter bass Isolation-enhancing design Properties of IsoAcoustics ISO 200SUB: Application area: Studio height: 12,5 cm max. inclination angle: 6.5 degrees max. load capacity: 34 kg Dimensions: 200 x 250 mm Colour: black weight: 1,40 kg