Arm Set B - dodatak za treću klavijaturu namenjen popularnom stalku SPIDER PRO.

Arm Set B - dodatak za treću klavijaturu namenjen popularnom stalku SPIDER PRO.

Stalak za klavijature u stilu stola, vrhunskog kvaliteta i super čvrste konstrukcije - namenjen za profesionalce! Ukoliko imate neku težu kalvijaturu i sl., ovaj stalak je idealan za nju, ima izuzetne mogućnosti podešavanja.VARI-FOOT® podešavanje dolazi u kompletu.

Additional extendable 15° tilt angle support arms for the »Spider Pro« keyboard stand; available in black or silver with fastening clamp

Additional extendable 15° tilt angle support arms for the »Spider Pro« keyboard stand; available in black or silver with fastening clamp.

SPECIFIKACIJE: OSCILLATORS Two authentic CEM 3340 voltage-controlled oscillators per voice Simultaneously selectable wave shapes. Oscillator A: sawtooth, pulse. Oscillator B: sawtooth, triangle, pulse. Pulse width per oscillator Hard sync: Oscillator A syncs to Oscillator B Low frequency mode (Oscillator B) Keyboard tracking on/off (Oscillator B) MIXER Oscillator A amount Oscillator B amount White noise amount LOW-PASS FILTER Four-pole, resonant, low-pass filter per voice Switchable between authentic versions of the Prophet-5 Rev1/2 filter and Prophet-5 Rev3 filter Rev1/2 filter is a Dave Rossum-designed 2140, the modern counterpart of the original 2040 filter found in the Prophet-5 Rev1 and Rev2 Rev3 filter is a Doug Curtis-designed CEM 3320 Filter can be driven into self-oscillation with the Resonance control Keyboard tracking: off, half, full FILTER ENVELOPE Four-stage (ADSR) envelope generator Velocity modulation of envelope amount AMPLIFIER ENVELOPE Four-stage (ADSR) envelope generator Velocity modulation of envelope amount LOW FREQUENCY OSCILLATOR Three wave shapes: sawtooth, triangle, square. All waveshapes can be engaged simultaneously Both Initial Amount and mod wheel control Mod destinations: oscillator A frequency, Oscillator B frequency, Oscillator A and B pulse width, filter cutoff POLY MOD Sources: filter envelope and Oscillator B Destinations: Oscillator A frequency, Oscillator A pulse width, filter cutoff VINTAGE KNOB Recreates the characteristics of various Prophet-5 models by varying the behavior of oscillators, envelopes, amplifiers, and other parameters. Go from a very stable “4” — as in Prophet-5 Rev4, (the new version) — all the way to “1,” as in Prophet-5 Rev1, the rarest and most temperamental of all Prophet-5s. AFTERTOUCH Channel (mono) aftertouch Destinations: filter cutoff frequency, LFO amount PERFORMANCE CONTROLS Polyphonic glide (portamento) Unison (monophonic) mode with configurable voice count, from one to all five voices and key modes Preset switch: when off, the front panel is live; what you see is what you hear PATCH MEMORY 200 user and 200 factory programs in 5 banks of 40 programs each Direct program access, including Prophet 5-style single-button access to the current set of 8 programs IN/OUT Mono output (1 x 1/4” phone jack) Headphone output (stereo, 1/4” phone jack) MIDI in, out, and thru ports USB for bidirectional MIDI communication Control voltage in/out (1 x 1/4” phone jack) 0- +5V input/output signal. Configured for 1-volt-per-octave operation. Gate in/out (1 x 1/4” phone jack). Accepts a 1.5 to 15-volt on/off signal to gate the envelopes of a single voice on the Prophet-5. Outputs a 15-volt on/off used to gate the envelopes of an external synth. Low-pass filter cutoff expression pedal input Volume expression pedal input Sustain footswitch input POWER IEC AC power inlet for internal power supply Operates worldwide on voltages between 100 and 240 volts at 50 to 60 Hz; Prophet-5: 20 watts maximum power consumption. PHYSICAL SPECS 20.75″ L x 7.4″ W x 3″ H (52.70 cm x 18.8 cm x 7.62 cm) Roadworthy all-steel case with premium black walnut heartwood trim

SPECIFIKACIJE: OSCILLATORS Two authentic CEM 3340 voltage-controlled oscillators per voice Simultaneously selectable wave shapes. Oscillator A: sawtooth, pulse. Oscillator B: sawtooth, triangle, pulse. Pulse width per oscillator Hard sync: Oscillator A syncs to Oscillator B Low frequency mode (Oscillator B) Keyboard tracking on/off (Oscillator B) MIXER Oscillator A amount Oscillator B amount White noise amount LOW-PASS FILTER Four-pole, resonant, low-pass filter per voice Switchable between authentic versions of the Prophet-5 Rev1/2 filter and Prophet-5 Rev3 filter Rev1/2 filter is a Dave Rossum-designed 2140, the modern counterpart of the original 2040 filter found in the Prophet-5 Rev1 and Rev2 Rev3 filter is a Doug Curtis-designed CEM 3320 Filter can be driven into self-oscillation with the Resonance control Keyboard tracking: off, half, full FILTER ENVELOPE Four-stage (ADSR) envelope generator Velocity modulation of envelope amount AMPLIFIER ENVELOPE Four-stage (ADSR) envelope generator Velocity modulation of envelope amount LOW FREQUENCY OSCILLATOR Three wave shapes: sawtooth, triangle, square. All waveshapes can be engaged simultaneously Both Initial Amount and mod wheel control Mod destinations: oscillator A frequency, Oscillator B frequency, Oscillator A and B pulse width, filter cutoff POLY MOD Sources: filter envelope and Oscillator B Destinations: Oscillator A frequency, Oscillator A pulse width, filter cutoff VINTAGE KNOB Recreates the characteristics of various Prophet-5 models by varying the behavior of oscillators, envelopes, amplifiers, and other parameters. Go from a very stable “4” — as in Prophet-5 Rev4, (the new version) — all the way to “1,” as in Prophet-5 Rev1, the rarest and most temperamental of all Prophet-5s. AFTERTOUCH Channel (mono) aftertouch Destinations: filter cutoff frequency, LFO amount BI-TIMBRAL OPERATION Layer mode: two different 5-voice programs stacked together simultaneously Split mode: two independent, user-assignable performance zones, with a different 5-voice program assigned to each. PERFORMANCE CONTROLS Polyphonic glide (portamento) Unison (monophonic) mode with configurable voice count, from one to all five voices and key modes Preset switch: when off, the front panel is live; what you see is what you hear PATCH MEMORY 200 user and 200 factory programs in 5 banks of 40 programs each Direct program access, including Prophet 5-style single-button access to the current set of 8 programs IN/OUT Mono output (1 x 1/4” phone jack) Headphone output (stereo, 1/4” phone jack) MIDI in, out, and thru ports USB for bidirectional MIDI communication Control voltage in/out (1 x 1/4” phone jack) 0- +5V input/output signal. Configured for 1-volt-per-octave operation. Gate in/out (1 x 1/4” phone jack). Accepts a 1.5 to 15-volt on/off signal to gate the envelopes of a single voice on the Prophet-5. Outputs a 15-volt on/off used to gate the envelopes of an external synth. Low-pass filter cutoff expression pedal input Volume expression pedal input Sustain footswitch input POWER IEC AC power inlet for internal power supply Operates worldwide on voltages between 100 and 240 volts at 50 to 60 Hz; Prophet-5: 20 watts maximum power consumption. PHYSICAL SPECS 20.75″ L x 7.4″ W x 3″ H (52.70 cm x 18.8 cm x 7.62 cm) Roadworthy all-steel case with premium black walnut heartwood trim

StudioLogic Numa Organ 2 su nove virtualne Tone wheel orgulje. Opremljene su sa 73 poluotežane dirke (od kojih dirke prve oktave imaju obrnutu boju), sq 9 registara na izvlačenje i MIDI upravljačkim funkcijama te mnoštvom kontrola koje su nadahnute Hammondovim orguljama B-3. Uz klasične zvukove modela B, tu su još i rjeđi modeli A, C i G, kao i klasične crkvene orgulje i par modela popularnih električnih orgulja. Kad je u pitanju simulator rotacijskog zvučnika (Leslie), Numa Organ 2 neće vas razočarati. Uz njega su tu i orguljaški klasični efekti, a maksimalnu fleksibilnost sviranja nudi mogućnost pohranjivanja sopstvenih preseta, kao i MIDI i USB povezivanje sa kompom.

SPECIFIKACIJA: Dual-manual - 2 x 61 keys With Hammond drawbars Piano and vintage sounds Sound production: Organ Section 2-VASE III 8-Fold polyphony (for pedal) 63-Fold polyphony (for organ only) 9 Drawbars, assignable for Upper, Pedal, Lower Voicing Manual: 6 Settings selectable -B-Type1, B-Type2, Mellow, Vx, Farf, Pipe Pedal: 4 Settings selectable -Normal, Muted, Synth1, Synth2 Integrated effects Equalizer Internal Leslie 100 Preset and 100 user patches Integrated Wav- / MP3 File Player Display Dimensions (W x H x D): 944 x 454 x 170 mm Weight: 16.9 kg Includes power supply Connections: USB port for external storage medium MIDI input and output Line output: L / R 6.3 mm Headphone jack 11-Pin Leslie connector Footswitch, damper and expression pedal connector

Stage orgulje sa dvostrukom 61 dirkom ! Kao dodatak višestruko dokazanoj 2-Vase III organ tonskom generatoru i Vox, Farisa i sakralnim orguljama ovaj model od sada donosi širi i fleksibilniji spektar dodatnih zvukova. Ovi vintage usmereni zvukovi odišu kvalitetom i sa samopouzdanjem. Bitni parameteri poput ekvalajzera, overdrive efekta i reverba su podesivi putem odvojenih kontrola, sve detaljnije postavke definšu se putem ekrana. Ovaj instrument teži svega 16Kg, tako da je ovaj model izuzetno mobilan. Piano i vintage zvukovi, 63-notna polifonija (za orgulje) i 8-notna polifonija za pedale, 9 kliznih potenciometara (upravljivi za gornji, donji manual i za pedalu), 6 ručnih postavki selektivno: B-Type 1, Type B-2, Mellow, Vx, Farf, Pipe, 4 pedal postavki može biti odabrano: Normal, Muted, Synth1, Synth2. Integrirani Leslie efekt, 10 preset zvukova + 100 korisničkih zvukova.

SPECIFIKACIJE: Type:Desktop Synthesizer Analog/Digital:Analog Polyphony:Monophonic, 16 Notes via Poly Chain Oscillators:2 x Analog VCO: 3340, 3320 Chips Waveforms:Osc A: Sawtooth, Pulse ; Osc B: Sawtooth, Triangle, Pulse Noise Generator:White Noise Envelope Generator:ADSR (filter), ADSR (amplifier) LFO:1 x Analog LFO: Sawtooth, Triangle, Square VCA:Yes Filter:Lowpass 4-pole 24dB/octave Arpeggiator:3 Patterns: Ascending, Descending, Off Sequencer:64-note, 2 x Sequences Analog Inputs:1 x 1/8" (external audio) Analog Outputs:1 x 1/4", 1 x 1/8" Headphones:1 x 1/8" MIDI I/O:In, Out/Thru, USB USB:1 x Type B Expansion:Poly Chain multiple Synthesizers OS Requirements - Mac:OS X 10.8.5 or later OS Requirements - PC:Windows 7 SP1 or later Power Supply:12V DC power supply (included) Dimensions: 95 x 424 x 136 mm Weight: 1.8 kg Includes power supply (12 V DC)

HAMMOND XK-4 je sinonim za klasične orgulje "tonewheel" kao što su B-3 koje su odigrale veliku ulogu u muzičkoj revoluciji 1960-ih i 70-ih. U digitalnoj eri, Hammond je preuzeo vodeću ulogu u razvoju najsavremenijih orgulja koje isporučuju te legendarne zvuke orgulja. Sada, iskustvo B-3 dostiže novi nivo realizma koji oduzima dah sa Hammond KSK-4 prenosivim orguljama. XK-4 je opremljen novim zvučnim “Modelled Tone Vheel 2 (MTV2)” "engine-om" koji precizno reprodukuje točkove od 91 tona u srcu svih starinskih Hammond orgulja. Ova nova tehnologija omogućava izražavanje nesavršenosti dajući starinskim Hamondima njihovu distinkciju, kao što su fluktuacije visine tona usled zazora tona i fluktuacije jačine zvuka usled decentriranja. Sloboda da prilagodite svoj ton nikada nije bila veća.Chorus/Vibrato” i „Touch-Response Percussion” su uključeni, sa mogućnošću izbora između tri generacije virtuelnog Chorus/Vibrato skenera; i karakteristike udaraljki. Takođe možete primeniti autentični vibrato za modele tranzistorskih organa i autentične tremulante za modele organa za cevi.

Savršena simbioza modernog i vintage sveta kada je zvuk orgulja u pitanju, pravo "malo-umetničko-delo" unutar mobilnog pakovanja! Najjači mobilni model od Hammonda koji sadrži vrhunski dizajn zasnovan na originalnoj B-3 shemi , sadrži legendarni zvuk, osećaj i dušu - sa neverovatnom preciznosti. Iznutra, nova tehnologija sadrži prvoklasni pogon zvuka koji kombinuje modleing i sempliranje kako bi se reprodukovao svaki detalj .

Specs: Sample-based drum machine with 64MB sample memory and over 1GB of onboard storage 8 stereo audio tracks support one-shot samples and sample chains 1 multimode-filter per audio track and 1 assignable LFO per track Delay and Reverb send effects onboard 8 MIDI tracks for sequencing external instruments Powerful Elektron sequencing with Trig Conditions and Parameter Locks MIDI sequencer features +3 note offset for every step for sequencing chords up to four notes USB 2.0 connectivity, with support for Overbridge MIDI In, Out, and Thru ports Type:8-voice Drum Machine/Sequencer Pads:16 Patterns:128 patterns per project Sequencer:8 x MIDI tracks, 8 x audio tracks Sampler:Yes Effects Types:Delay, Reverb Analog Inputs:2 x 1/4" (left, right) Analog Outputs:2 x 1/4" (main out) Headphones:1 x 1/4" MIDI I/O:In, Out (sync A), Thru (sync B) USB:1 x Type B Storage:64MB sample memory, 1GB +Drive Sound Library (up to 2048 sounds stored) Software:Elektron Overbridge Basic Power:12V DC power supply (included) Dimensions (W x D x H): 215 x 184 x 63 mm Weight: 1.45 kg

A Hammond B-3 You Can Tuck Under Your Arm! The Hammond XK-1c packs the sonic fortitude of the legendary B-3 into a tidy package weighing just over 16 lbs. This portable organ serves up genuine B-3 mojo, replete with real mechanical drawbars, chorus, vibrato, touch-response percussion, and an outrageously convincing digital Leslie rotary speaker emulation. The XK-1c also gives you Vx and Farf combo models, plus a potpourri of fine classical pipe organ voices. If you're hankering for authentic, swirluptuous B-3 tones - but don't have a road crew and a semi, here's your chance. Hook up with the Hammond XK-1c and give your music some lovin'. Hammond XK-1c Combo Organ at a Glance: Insist on real-deal Hammond organ sounds Extensive customization options let you ace any stylistic requirement Vx, Farf, and Pipe organs round out the soundset Insist on real-deal Hammond organ sounds When it comes to organ sounds, most purists insist on the real thing. The XK-1c walks like a Hammond - and talks like a Hammond. It's just several hundred pounds lighter and fits in your Mini. The Drawbar section is a complete Hammond organ with all the functions. Two Hammond VASE III digital tone-wheel sound generators deliver voicings so convincing, your fans will be looking around for a hidden Leslie cabinet. Extensive customization options let you ace any stylistic requirement The Hammond XK-1c gives you extensive customization options, letting you replicate any vintage of Hammond/Leslie, with all the settings stored with each patch. What's more, the editing facilities accommodate many popular aftermarket modifications. With 64 factory patches and 64 user-programmable patches, XK-1c delivers a wide variety of Hammond tones to cover a broad range of musical styles. Vx, Farf, and Pipe organs round out the soundset In addition to the Drawbar Profiles, Hammond XK-1c gives you the sounds of two of the most popular transistor combo organs (Vx and Farf), along with 28 glorious Classical Pipe Organ sounds. You can even register the Combo Organ and Pipe Organ voices in traditional fashion with the Drawbar controls. Hammond XK-1c Combo Organ Features: Sound generator: two VASE III digital tone wheels, transistor organ and pipe organ Polyphony (except pipe organ): Manual: 61 notes, Pedal: 8 notes; Pipe Organ: 63 notes Keyboard: Waterfall 61-key, C1 to C6 Drawbars: 9 pitches, assignable for upper, pedal, lower Effects: Vibrato and chorus, overdrive, multi-effects (8 programs), reverb (11 programs) Equalizer: Bass, Mid, Treble, Tone Master EQ: Bass, Mid, Treble MIDI I/O; USB flash drive storage The Hammond XK-1c: for those organ(ic) sounds you can't get anywhere else!

Nadogradite svoj XK-5 u dvostruku klavijaturu Hammond XLK-5 Lover Manual (donja klavijatura) je donja komponenta tastature XK-5 koji je ponos Hammond kompanije. Ovaj sistem je idealan za touring klavijaturiste kojima je potreban potpuno prenosiv, moderan B-3. XLK-5 Lover Manual je opremljen istim ključem i višekontaktnim sistemom kao i XK-5, a ima i isti kvalitet rada kućišta kao glavna jedinica, sa vertikalno proširenim bočnim panelima koji čvrsto drže vaš XK-5.

SPECIFIKACIJE: Oscillators Two authentic CEM 3340 VCOs per voice Simultaneously selectable wave shapes. Oscillator A: sawtooth, pulse. Oscillator B: sawtooth, triangle, pulse. Pulse width per oscillator Hard sync: oscillator 1 syncs to oscillator 2 Low frequency mode (oscillator 2) Keyboard tracking on/off (oscillator 2) Mixer Oscillator 1 amount Oscillator 2 amount White noise amount Low-Pass Filter Four-pole, resonant, low-pass filter per voice Switchable between authentic versions of the Prophet-5 Rev1/2 filter and Prophet-5 Rev3 filter Rev1/2 filter is a Dave Rossum-designed 2140, the modern counterpart of the original 2040 filter found in the Prophet-5 Rev1 and Rev2 Rev3 filter is a Doug Curtis-designed CEM 3320 Filter can be driven into self-oscillation with the Resonance control Keyboard tracking: off, half, full Filter Envelope Four-stage (ADSR) envelope generator Velocity modulation of envelope amount Amplifier Envelope Four-stage (ADSR) envelope generator Velocity modulation of envelope amount Low Frequency Oscillator Three wave shapes: sawtooth, triangle, square. All waveshapes can be engaged simultaneously Both Initial Amount and mod wheel control Mod destinations: oscillator A frequency, oscillator B frequency, oscillator A and B pulse width, filter cutoff Poly Mod Sources: filter envelope and oscillator B Destinations: oscillator A frequency, oscillator A pulse width, filter cutoff Vintage Knob Recreates the characteristics of various Prophet-5 models by varying the behaviour of oscillators, envelopes, amplifiers, and other parameters. Go from a very stable “4” — as in Prophet-5 Rev4, (the new version) — all the way to “1,” as in Prophet-5 Rev1, the rarest and most temperamental of all Prophet-5s. Aftertouch Channel (mono) aftertouch Destinations: filter cutoff frequency, LFO amount Performance Controls Full-sized, semi-weighted, premium Fatar 5-octave keyboard with velocity and aftertouch Mod wheel Spring-loaded pitch wheel with selectable range per program (1 to 12 semitones up and down) Polyphonic glide (portamento) Unison (monophonic) mode with configurable voice count, from one to all five voices (10 voices for Prophet-10) and key modes Preset switch: when off, the front panel is live; what you see is what you hear Patch Memory 200 user and 200 factory programs in 5 banks of 40 programs each Direct program access, including Prophet 5-style single-button access to the current set of 8 programs In/Out Mono output (1 x 1/4” phone jack) Headphone output (stereo, 1/4” phone jack) MIDI in, out, and thru ports USB for bidirectional MIDI communication Control voltage in/out (1 x 1/4” phone jack) 0- +5V input/output signal. Configured for 1-volt-per-octave operation. Gate in/out (1 x 1/4” phone jack). Accepts a 1.5 to 15-volt on/off signal to gate the envelopes of a single voice on the Prophet-5. Outputs a 15-volt on/off used to gate the envelopes of an external synth. Low-pass filter cutoff expression pedal input Volume expression pedal input Sustain footswitch input Power IEC AC power inlet for internal power supply Physical 37.5” L x 16.4 W x 4.9" H (95.25 cm x 41.6 cm x 12.4 cm) 31 lbs (14.06 kg) Roadworthy all-steel construction with premium black walnut heartwood body and trim SPECIFIKACIJE: Oscillators Two authentic CEM 3340 VCOs per voice Simultaneously selectable wave shapes. Oscillator A: sawtooth, pulse. Oscillator B: sawtooth, triangle, pulse. Pulse width per oscillator Hard sync: oscillator 1 syncs to oscillator 2 Low frequency mode (oscillator 2) Keyboard tracking on/off (oscillator 2) Mixer Oscillator 1 amount Oscillator 2 amount White noise amount Low-Pass Filter Four-pole, resonant, low-pass filter per voice Switchable between authentic versions of the Prophet-5 Rev1/2 filter and Prophet-5 Rev3 filter Rev1/2 filter is a Dave Rossum-designed 2140, the modern counterpart of the original 2040 filter found in the Prophet-5 Rev1 and Rev2 Rev3 filter is a Doug Curtis-designed CEM 3320 Filter can be driven into self-oscillation with the Resonance control Keyboard tracking: off, half, full Filter Envelope Four-stage (ADSR) envelope generator Velocity modulation of envelope amount Amplifier Envelope Four-stage (ADSR) envelope generator Velocity modulation of envelope amount Low Frequency Oscillator Three wave shapes: sawtooth, triangle, square. All waveshapes can be engaged simultaneously Both Initial Amount and mod wheel control Mod destinations: oscillator A frequency, oscillator B frequency, oscillator A and B pulse width, filter cutoff Poly Mod Sources: filter envelope and oscillator B Destinations: oscillator A frequency, oscillator A pulse width, filter cutoff Vintage Knob Recreates the characteristics of various Prophet-5 models by varying the behaviour of oscillators, envelopes, amplifiers, and other parameters. Go from a very stable “4” — as in Prophet-5 Rev4, (the new version) — all the way to “1,” as in Prophet-5 Rev1, the rarest and most temperamental of all Prophet-5s. Aftertouch Channel (mono) aftertouch Destinations: filter cutoff frequency, LFO amount Performance Controls Full-sized, semi-weighted, premium Fatar 5-octave keyboard with velocity and aftertouch Mod wheel Spring-loaded pitch wheel with selectable range per program (1 to 12 semitones up and down) Polyphonic glide (portamento) Unison (monophonic) mode with configurable voice count, from one to all five voices (10 voices for Prophet-10) and key modes Preset switch: when off, the front panel is live; what you see is what you hear Patch Memory 200 user and 200 factory programs in 5 banks of 40 programs each Direct program access, including Prophet 5-style single-button access to the current set of 8 programs In/Out Mono output (1 x 1/4” phone jack) Headphone output (stereo, 1/4” phone jack) MIDI in, out, and thru ports USB for bidirectional MIDI communication Control voltage in/out (1 x 1/4” phone jack) 0- +5V input/output signal. Configured for 1-volt-per-octave operation. Gate in/out (1 x 1/4” phone jack). Accepts a 1.5 to 15-volt on/off signal to gate the envelopes of a single voice on the Prophet-5. Outputs a 15-volt on/off used to gate the envelopes of an external synth. Low-pass filter cutoff expression pedal input Volume expression pedal input Sustain footswitch input Power IEC AC power inlet for internal power supply Physical 37.5” L x 16.4 W x 4.9" H (95.25 cm x 41.6 cm x 12.4 cm) 31 lbs (14.06 kg) Roadworthy all-steel construction with premium black walnut heartwood body and trim

SPECIFIKACIJE: OSCILLATORS Two authentic CEM 3340 VCOs per voice Simultaneously selectable wave shapes. Oscillator A: sawtooth, pulse. Oscillator B: sawtooth, triangle, pulse. Pulse width per oscillator Hard sync: oscillator 1 syncs to oscillator 2 Low frequency mode (oscillator 2) Keyboard tracking on/off (oscillator 2) MIXER Oscillator 1 amount Oscillator 2 amount White noise amount LOW-PASS FILTER Four-pole, resonant, low-pass filter per voice Switchable between authentic versions of the Prophet-5 Rev1/2 filter and Prophet-5 Rev3 filter Rev1/2 filter is a Dave Rossum-designed 2140, the modern counterpart of the original 2040 filter found in the Prophet-5 Rev1 and Rev2 Rev3 filter is a Doug Curtis-designed CEM 3320 Filter can be driven into self-oscillation with the Resonance control Keyboard tracking: off, half, full FILTER ENVELOPE Four-stage (ADSR) envelope generator Velocity modulation of envelope amount AMPLIFIER ENVELOPE Four-stage (ADSR) envelope generator Velocity modulation of envelope amount LOW FREQUENCY OSCILLATOR Three wave shapes: sawtooth, triangle, square. All waveshapes can be engaged simultaneously Both Initial Amount and mod wheel control Mod destinations: oscillator A frequency, oscillator B frequency, oscillator A and B pulse width, filter cutoff POLY MOD Sources: filter envelope and oscillator B Destinations: oscillator A frequency, oscillator A pulse width, filter cutoff VINTAGE KNOB Recreates the characteristics of various Prophet-5 models by varying the behavior of oscillators, envelopes, amplifiers, and other parameters. Go from a very stable “4” — as in Prophet-5 Rev4, (the new version) — all the way to “1,” as in Prophet-5 Rev1, the rarest and most temperamental of all Prophet-5s. AFTERTOUCH Channel (mono) aftertouch Destinations: filter cutoff frequency, LFO amount BI-TIMBRAL OPERATION Layer mode: two different 5-voice programs stacked together simultaneously Split mode: two independent, user-assignable performance zones, with a different 5-voice program assigned to each. PERFORMANCE CONTROLS Full-sized, semi-weighted, premium Fatar 5-octave keyboard with velocity and aftertouch Mod wheel Spring-loaded pitch wheel with selectable range per program (1 to 12 semitones up and down) Polyphonic glide (portamento) Unison (monophonic) mode with configurable voice count, from one to all ten voices and key modes Preset switch: when off, the front panel is live; what you see is what you hear PATCH MEMORY 200 user and 200 factory programs in 5 banks of 40 programs each Direct program access, including Prophet 5-style single-button access to the current set of 8 programs IN/OUT Mono output (1 x 1/4” phone jack) Headphone output (stereo, 1/4” phone jack) MIDI in, out, and thru ports USB for bidirectional MIDI communication Control voltage in/out (1 x 1/4” phone jack) 0- +5V input/output signal. Configured for 1-volt-per-octave operation. Gate in/out (1 x 1/4” phone jack). Accepts a 1.5 to 15-volt on/off signal to gate the envelopes of a single voice on the Prophet-10. Outputs a 15-volt on/off used to gate the envelopes of an external synth. Low-pass filter cutoff expression pedal input Volume expression pedal input Sustain footswitch input POWER IEC AC power inlet for internal power supply Operates worldwide on voltages between 100 and 240 volts at 50 to 60 Hz; 28 watts maximum power consumption PHYSICAL SPECS 37.37” L x 16.35 W x 5.95″ H (94.92 cm x 41.52 cm x 15.11 cm) 32 lbs (14.51 kg) Roadworthy all-steel construction with premium black walnut heartwood body and trim SPECIFIKACIJE: OSCILLATORS Two authentic CEM 3340 VCOs per voice Simultaneously selectable wave shapes. Oscillator A: sawtooth, pulse. Oscillator B: sawtooth, triangle, pulse. Pulse width per oscillator Hard sync: oscillator 1 syncs to oscillator 2 Low frequency mode (oscillator 2) Keyboard tracking on/off (oscillator 2) MIXER Oscillator 1 amount Oscillator 2 amount White noise amount LOW-PASS FILTER Four-pole, resonant, low-pass filter per voice Switchable between authentic versions of the Prophet-5 Rev1/2 filter and Prophet-5 Rev3 filter Rev1/2 filter is a Dave Rossum-designed 2140, the modern counterpart of the original 2040 filter found in the Prophet-5 Rev1 and Rev2 Rev3 filter is a Doug Curtis-designed CEM 3320 Filter can be driven into self-oscillation with the Resonance control Keyboard tracking: off, half, full FILTER ENVELOPE Four-stage (ADSR) envelope generator Velocity modulation of envelope amount AMPLIFIER ENVELOPE Four-stage (ADSR) envelope generator Velocity modulation of envelope amount LOW FREQUENCY OSCILLATOR Three wave shapes: sawtooth, triangle, square. All waveshapes can be engaged simultaneously Both Initial Amount and mod wheel control Mod destinations: oscillator A frequency, oscillator B frequency, oscillator A and B pulse width, filter cutoff POLY MOD Sources: filter envelope and oscillator B Destinations: oscillator A frequency, oscillator A pulse width, filter cutoff VINTAGE KNOB Recreates the characteristics of various Prophet-5 models by varying the behavior of oscillators, envelopes, amplifiers, and other parameters. Go from a very stable “4” — as in Prophet-5 Rev4, (the new version) — all the way to “1,” as in Prophet-5 Rev1, the rarest and most temperamental of all Prophet-5s. AFTERTOUCH Channel (mono) aftertouch Destinations: filter cutoff frequency, LFO amount BI-TIMBRAL OPERATION Layer mode: two different 5-voice programs stacked together simultaneously Split mode: two independent, user-assignable performance zones, with a different 5-voice program assigned to each. PERFORMANCE CONTROLS Full-sized, semi-weighted, premium Fatar 5-octave keyboard with velocity and aftertouch Mod wheel Spring-loaded pitch wheel with selectable range per program (1 to 12 semitones up and down) Polyphonic glide (portamento) Unison (monophonic) mode with configurable voice count, from one to all ten voices and key modes Preset switch: when off, the front panel is live; what you see is what you hear PATCH MEMORY 200 user and 200 factory programs in 5 banks of 40 programs each Direct program access, including Prophet 5-style single-button access to the current set of 8 programs IN/OUT Mono output (1 x 1/4” phone jack) Headphone output (stereo, 1/4” phone jack) MIDI in, out, and thru ports USB for bidirectional MIDI communication Control voltage in/out (1 x 1/4” phone jack) 0- +5V input/output signal. Configured for 1-volt-per-octave operation. Gate in/out (1 x 1/4” phone jack). Accepts a 1.5 to 15-volt on/off signal to gate the envelopes of a single voice on the Prophet-10. Outputs a 15-volt on/off used to gate the envelopes of an external synth. Low-pass filter cutoff expression pedal input Volume expression pedal input Sustain footswitch input POWER IEC AC power inlet for internal power supply Operates worldwide on voltages between 100 and 240 volts at 50 to 60 Hz; 28 watts maximum power consumption PHYSICAL SPECS 37.37” L x 16.35 W x 5.95″ H (94.92 cm x 41.52 cm x 15.11 cm) 32 lbs (14.51 kg) Roadworthy all-steel construction with premium black walnut heartwood body and trim

The Drawbar Has Been Raised In the authenticity sweepstakes, the Hammond XK-5 blows away the barrier between vintage and modern, redefining the state of the art in portable digital organs. Hammond's flagship portable, the XK-5, features a ground-up design that draws on original B-3 schematics, capturing that legendary sound, feel - and soul - with unerring accuracy. Onboard, new technologies include a cutting-edge sound engine that combines modeling and sampling to reproduce every nuance of vintage electro-mechanical tonewheel generators. The new custom waterfall keybed provides the inimitable feel of a vintage B-3 and is ideal for palm slides and other classic playing techniques. Other features include four sets of drawbars plus pedal drawbars, an uber-realistic Digital Leslie, and downloadable tonewheel profiles. The foundation of Hammond's new Heritage Series, the XK-5 is modular, letting you configure as large a system as your music requires. Hammond XK-5 at a Glance: Hybrid Multiple-key Contact System for realism and versatility Redesigned Keybed gives you incredible playing feel All-new Sound Engine delivers a stunning re-creation of classic Hammonds Virtual Matching Transformer lets you dial in hysteresis and saturation Streamlined operation makes the XK-5 a joy to use Hybrid Multiple-key Contact System for realism and versatility Play a key on a classic Hammond, and you're closing nine mechanical contacts - one for each drawbar. You hear these multiple harmonics as one note, but press a key slowly, and you'll hear the harmonics come in sequentially. In normal playing, this creates a characterful, albeit subtle, slop on the slow attacks; the more drawbars you have pulled out, the more that chewy, soulful personality comes out. Hammond knows this can't be realized with a simple MIDI note-on (which is how most contemporary organ and synth actions work). Instead, they use three mechanical contacts at different locations in the key travel. Each of these, in turn, triggers three virtual contacts, giving you separate note-on connections for every drawbar frequency, after the fashion of the original 9-contact electro-mechanical Hammond organs. The payoff is a fingers-to-sound relationship that duplicates playing a vintage B - without the cost and weight. A bonus is that you can program the time spread between these note-ons, and the order in which the harmonics speak. Moreover, because the contacts receive and transmit MIDI note data, you can capture the harmonic nuances of your performance in your DAW, to which you can connect the XK-5 via USB. Redesigned Keybed gives you incredible playing feel Hammond doesn't outsource the XK-5 keyboard action - they build it in-house. Designed to replicate the bounce, heft, key dip, and multi-contact actuation of a well-maintained new-old-stock B-3, this keybed has absolutely delighted hardcore B connoisseurs here. Equipped with waterfall key fronts, this keybed facilitates palm slides and other classic Hammond playing techniques. Contrast the XK-5 playing experience with contemporary organs from other brands, and you'll see there's really no comparison. This is the real deal. All-new Sound Engine delivers a stunning re-creation of classic Hammonds Hammond's storied tonewheel generator has been digitally re-created with stunning accuracy in the XK-5. Hammond employed both modeling and sampling techniques to capture the frequencies of all 91 tonewheels found in their vintage organs, as well as other signature sonic artifacts like key clicks, harmonic percussion, vibrato/chorus, and more. Tonewheel generators left the factory all sounding the same, but after years of use, no two are exactly alike. And with the XK-5, you can program individual tonewheel behavior and generator characteristics, such as leakage and crosstalk between pickups, as well as replicate particular Hammonds, right down to the year, model, serial number, and condition. What's more, you can call up presets of your favorite Hammond artists' instruments - and Hammond will be providing additional downloadable tonewheel profiles from preeminent Hammond organists. Virtual Matching Transformer lets you dial in hysteresis and saturation The tonewheels of vintage Hammonds generated small voltages that required stepping up, and you could draw on some of the same wheels simultaneously by playing similar notes with similar drawbar settings on both manuals. All the signals from the upper, lower, and pedal manuals passed through a matching transformer that evened out the signal before it advanced to the preamp and vibrato/chorus scanner. Transformers have a "memory" based on how hard they have been driven. This is called hysteresis, and it's responsible for the organic, breathing quality you hear in vintage Hammonds - and in the XK-5. Now, as the transformer in question is digitally modeled, you have complete control over the amount of hysteresis and saturation in your sound. Streamlined operation makes the XK-5 a joy to use Hammond incorporated the best new ideas into the design of the XK-5, and naturally kept the features that made the XK-3C and compact SK series a joy to play, such as their streamlined patch naming and copying conventions. In the XK-5, the intuitive display lets you hold any button and the first page of relevant parameters pops up. For example, when you hold the Leslie speed button, you'll see all the Digital Leslie settings. Not having to deal with annoying, time-consuming menu diving when you're customizing your sounds makes for quick sound changes and an enjoyable overall playing experience. Hammond XK-5 Features: 4 complete sets of Harmonic Drawbars, plus pedal drawbars: Just like a classic B-3 12 additional virtual tonewheels dedicated to harmonically complex pedal tones: In addition to the 8' and 16' sine waves found on Hammonds starting in 1945 Custom tonewheel profiles are available for download Hammond's premium digital Leslie effect: This is no ordinary "rotary simulator" Continuously variable Digital Leslie speed 12 reverse-color keys for selecting presets Dedicated Octave Shift and Transpose buttons DSP-based overdrive assisted by a vacuum tube preamp Optimized vibrato/chorus Dedicated on/off buttons and amount knobs for Reverb, Overdrive, and assignable Multi-FX Lower B drawbars may alternatively control 9 MIDI CC messages for external gear Left and right 1/4" outputs may be used concurrently with Leslie output: Run the XK-5 through a real Leslie in parallel with monitors, sub, or house PA Manual Bass function: key-triggering modes for pedal-to-lower coupler Updatable firmware via USB flash drive or directly from your computer Crisp OLED display is readable under variable lighting conditions Hammond's XK-5: classic sound and feel, without the weight or cost!

Casio klavijatura sa neverovatnim mogućnostima u svom rangu. Casio CTK-2100 je odličan izbor za jednog početnika, ali i nekog ko zna malo više. Poboljšani semplovi, prirodniji zvukovi, laka za sviranje i učenje, naucite lako da svirate uz ovu Casio klavijaturu. 61 dinamičkih dirki 48 notna polifonija AHL ton generator 400 zvukova 1 semplovani zvuk Vreme semplovanja: 1 sekunda Efekti 10 vrsta Reverb efekata Metronom: opseg tempa 30 do 255 110 kompozicija Sistem učenja u koracima Glasovni vodič prstoreda Vodič nota LCD displej Muzički izazov 150 ritmova MIDI 16 kanala, GM nivo 1 standard USB priključak TIP B Sustain priključak Phones/Output priključak Stereo standardni priključak: otpor izlaza: 200O Izlazni napon 4.8 V (RMS) MAX Audio in priključak Osetljivost ulaza: 200mV Automatsko isključivanje Zvučnici: 10 cm x 2 (2 W + 2 W)

SPECIFIKACIJE: Monophonic 3 VCOs with adjustable pulse width Oscillator 1 with outputs for sawtooth and pulse Oscillators 2 and 3 with switchable oscillator synchronization and outputs for triangle, sawtooth, sine and pulse Low-pass filter with resonance and 2 switchable filter characteristics Noise generator Ring modulator Sample & Hold stage Preamp and envelope follower for external signals Voltage processor ADSR envelope AR envelope Stereo VCA with adjustable panorama Mixable reverb effect Extensive modulation options for oscillators and filters are possible thanks to a specified signal path and free interconnection of all sections via patch sockets (3.5 mm jack) Stereo line output: 2x 6.3 mm jack Stereo headphone output: 3.5 mm jack Footswitch inputs for Interval Latch and Portamento: 6.3 mm jack MIDI In / Thru USB-B port Format: 19"/ 8 U Includes external power supply (12 V DC, 2000 mA)

ZNAČAJKE I SPECIFIKACIJA: Colour: black 25 velocity-sensitive keys are responsive and light Onboard pitch and modulation strips help you shape your sound Chord mode allows you to play any chord with the touch of a single key Octave ± buttons for shifting the keyboard range Eye-catching finish showcases your personality Integrated USB housing neatly stores your cable while not in use Type:Keyboard Controller Number of Keys:25 Type of Keys:Synth action, Mini-keys Velocity Sensitive:Yes Other Controllers:2 x Touch Strips (pitchbend, modulation, preset browsing) MIDI I/O:USB USB:1 x Type B (Type A cable included) Computer Connectivity:USB Software:Bitwig 8-Track, Arturia Analog Lab Lite, UVI Grand Piano Model D OS Requirements - Mac:OS X 10.10 or later, 64-bit OS Requirements - PC:Windows 7 SP1 or later, 64-bit Power Supply:USB bus powered Height:3" Width:16.6" Depth:7" Weight:1.8 lbs.

ZNAČAJKE I SPECIFIKACIJA: Colour: blue 25 velocity-sensitive keys are responsive and light Onboard pitch and modulation strips help you shape your sound Chord mode allows you to play any chord with the touch of a single key Octave ± buttons for shifting the keyboard range Eye-catching finish showcases your personality Integrated USB housing neatly stores your cable while not in use Type:Keyboard Controller Number of Keys:25 Type of Keys:Synth action, Mini-keys Velocity Sensitive:Yes Other Controllers:2 x Touch Strips (pitchbend, modulation, preset browsing) MIDI I/O:USB USB:1 x Type B (Type A cable included) Computer Connectivity:USB Software:Bitwig 8-Track, Arturia Analog Lab Lite, UVI Grand Piano Model D OS Requirements - Mac:OS X 10.10 or later, 64-bit OS Requirements - PC:Windows 7 SP1 or later, 64-bit Power Supply:USB bus powered Height:3" Width:16.6" Depth:7" Weight:1.8 lbs.

SPECIFIKACIJE: 11 Drum sounds: bass drum, snare drum, low tom, mid tom, high tom, rim shot, clap, open and closed hi hat, ride and crash cymbal 64-Step sequencer with poly meter, step repeat, note repeat, real-time triggering, track mute and track solo Accent and Flam programmable per instrument Wave Designer Dual Mode Filter Up to 16 songs and 256 patterns storable Auto Fill function Auto Scroll function LED display Dimensions (W x D x H): 477 x 264 x 78 mm Includes external power supply (18V DC) Connections: 1 Line output: 6.3 mm TRS jack Headphone output: 6.3 mm TRS jack Main return: 6.3 mm jack plug 10 Line single outputs: 6.3 mm jack 3 Trigger outputs: 6.3 mm jack Clock input/output: 3.5 mm jack USB-B port (USB MIDI) MIDI in/out/thru: 5-pin DIN

Casio klavijatura sa sa dinamikom, 5 oktava. Ova Casio CTK-300 klavijatura ima 48-notni polifoni AHL ton generator sa 400 zvukova, 150 ritmova, novim sistemom učenja, semplovanjem, audio ulazom za MP3, pitch-benderom. 61 dinamičkih dirki 48 notna polifonija AHL ton generator 400 zvukova 1 semplovani zvuk Vreme semplovanja: 1 sekunda Efekti 10 vrsta Reverb efekata Metronom: opseg tempa 30 do 255 110 kompozicija Sistem učenja u koracima Glasovni vodič prstoreda Vodič nota Muzički izazov 150 ritmova Transponovanje ±1 oktava (12 polutonova) Å timovanje A4 = približno 440 Hz ± 100 centi MIDI 16 kanala, GM nivo 1 standard Pitch Bend USB priključak TIP B Sustain priključak Phones/Output priključak Stereo standardni priključak: otpor izlaza: 200O Izlazni napon 4.8 V (RMS) MAX Audio in priključak Osetljivost ulaza: 200mV Automatsko isključivanje Zvučnici: 10 cm x 2 (2 W + 2 W)