Motorni trimer vrhunskog kvaliteta, Poljske proizvodnje. Prisutan je na tržištu već više godina i odlično se pokazao. Karakteristike: - Motor: dvotaktni, vazdušno hlađeni - Snaga: 5,2 Ks - Max obrtaj: 9000/min - Zapremina motora: 52 cm3 - Sistem prenosa snage: kardansko vratilo , automatsko centrifugalno kvačilo - Radni zahvat niti: 41.5 cm - Radni zahvat noža: 25 cm - Kapacitet rezervoara za gorivo: 1.35 L - Pravilno pripremljeno gorivo uslov je za dugovecan rad Vaseg motornog trimera. - Gorivo : mešavina 1 : 50 sa dvotaktnim uljem za visokoturazne motore ( trimere ili testere) ako koristite obican dvotaktol mesavina mora biti duplo jaca ( 1 : 25 ) - Masa: 7.4 Kg bez reznog alata i bez goriva OPREMA KOJA IDE UZ TRIMER -Trokraki nož 1kom -Glava sa strunom 2 kom -Metalni disk za strunu -Mrezasti vizir - zastita za lice -Oprtač na dva ramena -Struna 15 metara -kanister sa skalama za sastavljanje mesavine -Alat za sastavljanje i održavanje trimera -Uputstvo ra rukovanje i odrzavanje na srpskom jeziku Isporucuju se brzom postom- pouzecem u dinarskoj protivvrednosti. Trosak dostave je oko 400 din i snosi ga kupac. U poklon dajem jednu flasicu ulja za mesavinu. Uz trimer nudim i DODATNU OPREMU koja se placa : - Mast za podmazivanje glave prenosa - 5 Eu - Flasa ulja za mesavinu od 1 dl - 1 Eu - Kruznu testeru ( cirkular - vidia) - 5 Eu - Kruznu testeru ( cirkular za otkose deteline ili sena) - 10 eu - Nastavak za rezanje visokih grana ( mala lancana testera) - 25 Eu - Adapter kopacica sa 2x2 moticice zahvata 36 cm - 100 Eu Za ovaj model trimera imam i sve rezervne delove i to po veoma povoljnim cenama. Garancija i servis obezbedjeni Za dodatne informacije nazovite

Stoni Cirkulari Einhell - A K C I J A SLIKA 1. TC - TS 820 Stoni Cirkular 800W ( Stara cena 11.290 din ) - AKCIJSKA CENA : 9.990 DIN Stacionarna kružna testera TH-TS 820 Einhell TH - TS 820 stacionarna kružna testera je kompaktan, moćan alat za kućne majstore za sečenje drveta, vlaknastih ploča i mnogih drugih materijala Isporučuje se sa sa paralelnim vodjicama Kabl se bezbedno smešta na integrisanom držaču kabla Karbidno sečivo omogućava čist, moćan rez Zaštitnik sprečava povrede pri radu Napajanje 230 V 50 Hz Mak. snaga ( S2 | S2time ) 800 W | 10 min Broj obrtaja 2950 1 / min Testere Ø200 x Ø16 mm Broj zuba 20 kom Ugao rezanja 45 ° Mak. Visina rezanja na 45 ° 35 mm Mak. Visina rezanja na 90 ° 43 mm Podešavanje visine kontinuirano 43000 mm Prečnik usisnog adaptera 35 mm Veličina radnog stola 500 x 335 mm Težina 10 kg -------------------------------------------------------------------------------------------------- SLIKA 2. Stona kružna testera sa postoljem TC-TS 1200 EINHELL ( Stara cena 16.490 din ) - AKCIJSKA CENA : 15.000 DIN Karakteristike proizvoda Napajanje: 220-240 V | 50 Hz Max. snaga: 1200 W Broj obrtaja u praznom hodu: 4800 min ^ -1 Dimenzija lista testere: 210 mm x 30 mm Max. visina rezanja kod 45 ° : 27 mm Max. visina rezanja na 90 ° : 45 mm Podešavanje visine kontinuirano: 45 mm Promer usisnog adaptera: 36 mm Veličina radnog stola: 525 mm x 400 mm Obim isporuke: Poluga za guranje materijala, Paralelni graničnik, Visokokvalitetna TCT rezna ploča Težina: 15 kg -------------------------------------------------------------------------------------------------- SLIKA 3. Stoni cirkular TC-TS 2025 Eco EINHELL - 2000W ( Stara cena 19.290 din ) - AKCIJSKA CENA : 18.000 DIN Napon 230 V ~ 50 Hz Snaga 2000 W Broj obrtaja 5000 min -1 Visina rezanja 90 ° / 45 ° 85mm / 65 mm Testere Ø 250 x Ø 30 x 2,4 mm Broj zuba 24 Rotacija testere 0-45 ° Veličina stola 640 x 487 mm Obim isporuke: Paralelni graničnik sa stegom, Poprečni graničnik sa ugaonom skalom (+/- 60° ), Poluga za guranje radnog materijala Težina: 20.7 kg -------------------------------------------------------------------------------------------------- SLIKA 4. Stoni cirkular TC-TS 2025/1 U Einhell - 2000W ( Stara cena 20.800 din din ) - AKCIJSKA CENA : 19.200 DIN Pogodan je za pravolinijske i kose rezove u drvetu, i sl. materijalima. Isporučuje se sa reznim listom od tvrdog metala. Visina i ugao reza se mogu pojedinačno podešavati („2 u 1“ ) Sto sa proširenjem za široke predmete koji se obrađuju „2 u 1“ podešavanje reznog lista (visina, ugao 0° -45° ) Sto sa proširenjem za šire predmete obrade Zaštita reznog lista s adapterom za odvajanje piljevine Paralelni graničnik sa stegom Poprečni graničnik sa ugaonom skalom (+/- 60° ) Kućište s adapterom za odvajanje piljevine Stabilno postolje Napon 220-240 V | 50 Hz Max. snaga (S6 | S6%) 2000 W | 25 % Broj obrtaja praznog hoda 5000 min^-1 Rezni list Ø250 x ø30 mm Br. zuba reznog lista 24 Nagib reznog lista 45 ° Max. visina reza 45° 65 mm Max. visina reza 90° 85 mm Precizno podešavanje visine 0-85 mm Adapter za odvajanje piljevine Ø 36 mm Radna visina 850 mm Veličina radnog stola 640 x 487 mm Proširenje stola ulevo 640 x 200 mm Proširenje stola udesno 640 x 200 mm Produžetak levo i desno Obim isporuke: Paralelni graničnik sa stegom, Poprečni graničnik sa ugaonom skalom (+/- 60° ), Poluga za guranje radnog materijala Težina: 22 kg

Opis Sigma mašina za sečenje keramike 12D1, 205cm Sigma mašina za sečenje keramike 12D1, 205cm Sigma 12D1 XL sekač keramike velikih dimenzija do 205 cm dužine. Duple opruge na ručici olakšavaju rad sa grubim i reljefnim pločicama. Gazište veoma široko sa svojih 100 mm, optimalno za lako sečenje velikih formata. Lomljenje pločica se vrši pomoću lomilice koja se aktivira dizanjem ručice na gore po završetku pravljenja reza. Nožić prečnika 13 mm. Kučište je napravljeno od legure aluminijuma visoke otpornosti i čelika radi odlične krutosti. Preciznost, praktičnost i lagana čvrsta konstrukcija su glavne karakteristike Sigma sekača. Poseduje 4 alumijumska kraka za široke pločice Mašina je opremljena duplim lenjirom za savršeno paralelne rezove, sa rotacijom od 45° na obe strane. Brzo podešavanje pozicije lenjira na najčešće uglove sečenja sa razlikom od po 15°. Reduciran volumen mašine radi lakšeg transporta. Dupli merni kvadratni lenjir obezbeđuje savršenih 90° i može se postaviti na obe strane lenjira. Sigma 12D1 je opremljena točkićima za lakši transport. Sigma uvek radi na dugotrajnosti svojih proizvoda tako da su potrošni delovi mašina zamenski i lako dostupni. Karakteristike 12D1 XL mašine : Maksimalna dužina reza: 205 cm Maksimalna dužina dijagonale pločice: 145×145 cm Pokriva pločice debljine 0-19mm Sila lomljenja pločica 770 kg Težina: 36 Kg Sigma Sigma mašine Klick Klock serije opremljene su Klick Klock ručicom kod koje se pravljenje reza na pločici ostvaruje guranjem od sebe. Prednost Klick-Klock ručica je u tome što se prilikom lomljenja pločice drška ručice rotira za 180° čime je samo lomljenje olakšano kao i bolja preglednost nožića. Sigma mašine za keramiku su najkvalitetniji sekači keramike na tržištu. Italijanska marka sekača pločica i pribora za iste, koja je na našem tržištu prisutna već preko 10 godina. Mašine za pločice su ručni sekači pločica pomoću kojih ćete postići brz i precizan rez. Ovo su najkorišćenije mašine ove vrste i koriste ih svi – od profesionalaca do hobi majstora. Ispitivanja i ispitivanja koja se vrše prvo na prototipovima, a zatim i na mašinama u proizvodnji, garantuju proizvodnju gotovog proizvoda koji ispunjava najviše standarde kvaliteta i robusnosti, u skladu sa aktuelnim evropskim standardima. Tim Komerc kontakt: Telefon: 011 3 984 586 / 060 3 984 586 / 011 3 984 587 / 011 3 984 584 Email: [email protected]. Web: https://timkomerc.rs/ Radno vreme: Adresa maloprodaje: Paunova 8 Banjica Ponedeljak – Petak: 08 : 00 – 16 : 00 Subota: 09 : 00 – 14 : 00 Nedelja neradan dan OVDE možete videti celokupnu ponudu SIGMA alata Zapratite našu instagram stranicu kako biste bili u toku sa svim akcijama alata. – Ukoliko imate dodatnih pitanja uvek nas možete kontaktirati putem e – maila: [email protected]. – Takođe nas možete kontaktirati putem broja: 011 3 984 586 / 060 3 984 586 / 011 3 984 587 / 011 3 984 584

P04 The multi-function relay control module is specially designed for users with many different needs. It adopts a microcontroller as the main control unit and presets 32 kinds of functions, and users can use corresponding specific functions according to actual needs. It can be applied to water pump control, motor control, lamp strip control, solenoid valve control, etc. 1. New upgrade, the module function is increased to 32 kinds, to meet more application needs. 2. The power supply anti-reverse function will not damage the module due to wrong power supply. 3. Timing accuracy to 0.01 seconds timing. 0.1 seconds (minimum) ~ 999 minutes (maximum) optional 4. Low power consumption power saving setting, you can turn off the display area. Product parameters: Product Name: Multi-function time delay relay Relay V number: DC5V/12V/24V optional Input voltage: 5V version: DC5V power supply; 12V version: DC12V power supply; 24V version: DC24V power supply Output load: within 30V DC, maximum 10A. Within 250V, maximum 5A. Trigger signal: 5V version (high level: 5V); 12V version (high level: 12V), 24V version (high level: 24V) The low level is 0V. Quiescent current: 20mA Working current: 60mA Working temperature: -25℃-85℃ Power-off memory: Yes Product weight: ≈26g, product size: 65* 34.3 * 17.5 (MM L*W*H) The manual measurement is for reference only, the actual size is subject to the actual product Product Features: Wiring port description: DC+ Input DC power supply positive DC- Input DC power supply negative IN+ signal input positive IN- signal input negative NO relay normally open interface, the relay is short-circuited with COM when it is engaged, and it is suspended when not engaged; COM relay common terminal interface NC relay normally closed terminal interface, when the relay is not pulled in, it is short-circuited with COM, and it is left floating when pulled in; Instructions for use: Working mode (32 kinds): P-11: In jog mode, there is signal pull-in and no signal disconnect. P-12: Self-locking mode, the state of the relay reverses once after each trigger. P-13: After triggering, the relay will pull in and disconnect after delaying A time; the trigger will be invalid during the delay. P-14: After triggering, the relay will pull in, and it will be disconnected after the delay of A time; the trigger will be re-timed during the delay. P-15: After triggering, the relay will pull in, and it will be disconnected after the delay time A; during the delay time, the accumulated timer will be triggered. P-16: After triggering, the relay will pull in and disconnect after delaying time A; during the delay, a reset will be triggered (relay disconnected). P-17: After triggering, the relay pulls in for the duration of the signal, the input signal disappears, and then disconnects after the delay of A time; during the delay time, the relay is triggered again to keep the pull in, and the timing stops until the last signal disappears, delay A time Then disconnect. P-18: The relay will pull in immediately after power-on, and it will be disconnected after a delay of A second; until the next power-on. P-21: Give the signal, the relay will pull in after the delay of A time. P-22: Give a continuous signal, after the time exceeds A, the relay will pull in; when the signal disappears, the relay will open. P-23: When the signal disappears for more than A time, the relay pulls in; when there is a signal, the relay disconnects. P-24: Give a continuous signal. After the time exceeds A, the relay will pull in; when the signal disappears for more than time A, the relay will open. P-25: Give a continuous signal, the relay pulls in after exceeding A time; give a continuous signal again, the relay turns off after exceeding A time P-26: Give a signal, the relay will disconnect after A time pull-in; after the signal disappears, the relay will stop after A second pull-in. P-27: There is a pulse signal (rising edge or falling edge), the relay is disconnected, there is no pulse signal, the relay pulls in after the delay of A time (continuous high level or continuous low level are considered as no pulse). P-28: After power on, the relay will pull in after the delay time A until power off. The P-31: After power-on, the relay pulls in time A and turns off time B, in an infinite loop; power off stops. P-32: There is a continuous signal, the relay pulls in A time, disconnects B time, infinite loop; the signal disappears, and the loop is terminated. P-33: Give a signal once, the relay pulls in A time, disconnects B time, infinite loop; give another signal to terminate the loop. P-34: After power-on, the relay pulls in after the delay time A, and disconnects after pulling in the time B. P-35: Give a signal, after the delay time A, the relay pulls in and pulls off after the time B pulls in. P-36: Continuous signal is given. After the time A is exceeded, the relay is switched on and disconnected after the time B is switched on; the signal disappears, the timing is cleared, and the relay is turned off. P-37: There is a signal, the relay will be automatically disconnected after the A time is closed, and the B time will be counted after the disconnection. The signal trigger is invalid during the A+B time. P-38: There is a signal, the relay will be automatically disconnected after the time of pull-in A, after the time B is counted after the disconnection, it will be automatically disconnected after the time of pull-in A again. The P-41: The signal does not act; the signal disappears and triggers; the relay absorbs and merges after a delay of A time to disconnect. P-42: The signal disappears. After the delay time A, the relay pulls in; after the delay time B, the relay disconnects. P-43: The signal disappears. After the disappearance exceeds the time A, the relay pulls in; after delaying the time B, the relay opens. P-44: After power-on, the relay pulls in time A and turns off time B; after the cycle C times, the relay turns off and stops. P-45: No action after power on; after the signal is given, the relay pulls in the A time and disconnects the B time; the relay is turned off and stopped after C cycles; when the signal is given, it is executed again. P-46: After the signal is given more than A times, the relay pulls in; keeps pulling in; the power stops. P-47: After the signal exceeds A times, the relay pulls in; when it pulls in for B time, it is disconnected. P-48: During the C time, after continuously giving the signal more than A times, the relay will disconnect and stop after B time. Description table of the position of the decimal point and the time unit it represents: x.xx Decimal point is in the hundreds place, time range 0.01~9.99 seconds xx.x decimal point is in the tenth place, time range 0.1~99.9 seconds xxx has no decimal point, time range is 1~999 seconds xxx. The decimal point is in single digits, the time range is 1~999 minutes Turn off the display: In the non-setting state, press the K4 key to turn off the display, then press it again to turn on. Description of working parameter setting: Hold down the K1 key without letting go, after 2 seconds the display shows P-xx, press K2 and K3 to change the working mode. After selecting the working mode, short press K1 to enter the A time setting, the screen displays Axxx, then press K2 and K3 to modify the A time parameters, K2 and K3 key short press plus or minus 1, long press to quickly add and subtract 10, Press the K4 key to set the position of the decimal point. After setting the A time, press the K1 key to set the B time, the screen displays bxxx, then press the K2 and K3 keys to modify the B time parameters, K2 and K3 keys short press plus or minus 1, long press to quickly add and subtract 10, Press the K4 key to set the position of the decimal point. After setting the B time, (if the mode has the C cycle number parameter), then press the K1 key to set the C cycle number, the screen displays Cxxx, then press the K2 and K3 keys to modify the C cycle number parameter, K2 and K3 keys Short press to increase and decrease by 1, long press to increase and decrease by 10. After setting, press the K1 key once to exit the setting state and save all parameters.

P04 The multi-function relay control module is specially designed for users with many different needs. It adopts a microcontroller as the main control unit and presets 32 kinds of functions, and users can use corresponding specific functions according to actual needs. It can be applied to water pump control, motor control, lamp strip control, solenoid valve control, etc. 1. New upgrade, the module function is increased to 32 kinds, to meet more application needs. 2. The power supply anti-reverse function will not damage the module due to wrong power supply. 3. Timing accuracy to 0.01 seconds timing. 0.1 seconds (minimum) ~ 999 minutes (maximum) optional 4. Low power consumption power saving setting, you can turn off the display area. Product parameters: Product Name: Multi-function time delay relay Relay V number: DC5V/12V/24V optional Input voltage: 5V version: DC5V power supply; 12V version: DC12V power supply; 24V version: DC24V power supply Output load: within 30V DC, maximum 10A. Within 250V, maximum 5A. Trigger signal: 5V version (high level: 5V); 12V version (high level: 12V), 24V version (high level: 24V) The low level is 0V. Quiescent current: 20mA Working current: 60mA Working temperature: -25℃-85℃ Power-off memory: Yes Product weight: ≈26g, product size: 65* 34.3 * 17.5 (MM L*W*H) The manual measurement is for reference only, the actual size is subject to the actual product Product Features: Wiring port description: DC+ Input DC power supply positive DC- Input DC power supply negative IN+ signal input positive IN- signal input negative NO relay normally open interface, the relay is short-circuited with COM when it is engaged, and it is suspended when not engaged; COM relay common terminal interface NC relay normally closed terminal interface, when the relay is not pulled in, it is short-circuited with COM, and it is left floating when pulled in; Instructions for use: Working mode (32 kinds): P-11: In jog mode, there is signal pull-in and no signal disconnect. P-12: Self-locking mode, the state of the relay reverses once after each trigger. P-13: After triggering, the relay will pull in and disconnect after delaying A time; the trigger will be invalid during the delay. P-14: After triggering, the relay will pull in, and it will be disconnected after the delay of A time; the trigger will be re-timed during the delay. P-15: After triggering, the relay will pull in, and it will be disconnected after the delay time A; during the delay time, the accumulated timer will be triggered. P-16: After triggering, the relay will pull in and disconnect after delaying time A; during the delay, a reset will be triggered (relay disconnected). P-17: After triggering, the relay pulls in for the duration of the signal, the input signal disappears, and then disconnects after the delay of A time; during the delay time, the relay is triggered again to keep the pull in, and the timing stops until the last signal disappears, delay A time Then disconnect. P-18: The relay will pull in immediately after power-on, and it will be disconnected after a delay of A second; until the next power-on. P-21: Give the signal, the relay will pull in after the delay of A time. P-22: Give a continuous signal, after the time exceeds A, the relay will pull in; when the signal disappears, the relay will open. P-23: When the signal disappears for more than A time, the relay pulls in; when there is a signal, the relay disconnects. P-24: Give a continuous signal. After the time exceeds A, the relay will pull in; when the signal disappears for more than time A, the relay will open. P-25: Give a continuous signal, the relay pulls in after exceeding A time; give a continuous signal again, the relay turns off after exceeding A time P-26: Give a signal, the relay will disconnect after A time pull-in; after the signal disappears, the relay will stop after A second pull-in. P-27: There is a pulse signal (rising edge or falling edge), the relay is disconnected, there is no pulse signal, the relay pulls in after the delay of A time (continuous high level or continuous low level are considered as no pulse). P-28: After power on, the relay will pull in after the delay time A until power off. The P-31: After power-on, the relay pulls in time A and turns off time B, in an infinite loop; power off stops. P-32: There is a continuous signal, the relay pulls in A time, disconnects B time, infinite loop; the signal disappears, and the loop is terminated. P-33: Give a signal once, the relay pulls in A time, disconnects B time, infinite loop; give another signal to terminate the loop. P-34: After power-on, the relay pulls in after the delay time A, and disconnects after pulling in the time B. P-35: Give a signal, after the delay time A, the relay pulls in and pulls off after the time B pulls in. P-36: Continuous signal is given. After the time A is exceeded, the relay is switched on and disconnected after the time B is switched on; the signal disappears, the timing is cleared, and the relay is turned off. P-37: There is a signal, the relay will be automatically disconnected after the A time is closed, and the B time will be counted after the disconnection. The signal trigger is invalid during the A+B time. P-38: There is a signal, the relay will be automatically disconnected after the time of pull-in A, after the time B is counted after the disconnection, it will be automatically disconnected after the time of pull-in A again. The P-41: The signal does not act; the signal disappears and triggers; the relay absorbs and merges after a delay of A time to disconnect. P-42: The signal disappears. After the delay time A, the relay pulls in; after the delay time B, the relay disconnects. P-43: The signal disappears. After the disappearance exceeds the time A, the relay pulls in; after delaying the time B, the relay opens. P-44: After power-on, the relay pulls in time A and turns off time B; after the cycle C times, the relay turns off and stops. P-45: No action after power on; after the signal is given, the relay pulls in the A time and disconnects the B time; the relay is turned off and stopped after C cycles; when the signal is given, it is executed again. P-46: After the signal is given more than A times, the relay pulls in; keeps pulling in; the power stops. P-47: After the signal exceeds A times, the relay pulls in; when it pulls in for B time, it is disconnected. P-48: During the C time, after continuously giving the signal more than A times, the relay will disconnect and stop after B time. Description table of the position of the decimal point and the time unit it represents: x.xx Decimal point is in the hundreds place, time range 0.01~9.99 seconds xx.x decimal point is in the tenth place, time range 0.1~99.9 seconds xxx has no decimal point, time range is 1~999 seconds xxx. The decimal point is in single digits, the time range is 1~999 minutes Turn off the display: In the non-setting state, press the K4 key to turn off the display, then press it again to turn on. Description of working parameter setting: Hold down the K1 key without letting go, after 2 seconds the display shows P-xx, press K2 and K3 to change the working mode. After selecting the working mode, short press K1 to enter the A time setting, the screen displays Axxx, then press K2 and K3 to modify the A time parameters, K2 and K3 key short press plus or minus 1, long press to quickly add and subtract 10, Press the K4 key to set the position of the decimal point. After setting the A time, press the K1 key to set the B time, the screen displays bxxx, then press the K2 and K3 keys to modify the B time parameters, K2 and K3 keys short press plus or minus 1, long press to quickly add and subtract 10, Press the K4 key to set the position of the decimal point. After setting the B time, (if the mode has the C cycle number parameter), then press the K1 key to set the C cycle number, the screen displays Cxxx, then press the K2 and K3 keys to modify the C cycle number parameter, K2 and K3 keys Short press to increase and decrease by 1, long press to increase and decrease by 10. After setting, press the K1 key once to exit the setting state and save all parameters.

K15 Multi-mode delay time relay module 32 modes of pulse delay time delay time delay high precision programmable optocoupler isolation 5 v12v24v optional The multi-function relay control module is specially designed for users with various requirements. It adopts the microcontroller as the main control unit with 32 functions preset. Users can use the corresponding specific functions according to the actual requirements. Can be used in water pump control, motor control, lamp belt control, solenoid valve control and so on. 1. New upgrade, increasing the number of module functions to 32, to meet more application requirements. 2. Anti-backconnection function of power supply, which will not damage the module due to wrong power supply. 3. Timing accuracy to 0.01 second. 0.1 seconds (minimum) ~999 minutes (maximum) optional 4.. Low power saving Settings, you can turn off the display area. Product parameters: Commodity name: Multi-function delay relay Relay V number: DC5V/12V/24V optional Input voltage: 5V Version: DC5V power supply; 12V version: DC12V power supply; 24V version: DC24V power supply Output load: dc 30V, Max 10A. Ac 250V, maximum 5A. Trigger signal: 5V version (high level: 5V); Both 12V (HIGH level: 12V) and 24V (high level: 5V) low levels are 0V. Static current: 20mA Operating current: 60mA Operating temperature: -25℃-85℃ Power off memory: Yes Product weight: ≈26g, product size: 65 x 34.3 X 17.5 (MM) Manual measurement is for reference only. The actual size is subject to the material object Warm tips: 1. Please select the required V version (according to the relay identification difference above, the relay is 5V instant 5V version) to avoid wrong purchase. 2. The output of relay is passive contact without current output to control the on-off effect of a line. 3. Please input the trigger voltage strictly according to the selected version Instructions for use: Working mode (32 kinds) : P-11: Inching mode with suction and no disconnection. P-12: Self-locking mode, and the relay state is reversed once after each trigger. P-13: When triggered, the relay pulls in and disconnects after A time delay; Invalid trigger during delay. P-14: When triggered, the relay pulls in and disconnects after A time delay; Retiming is triggered during a delay. P-15: When triggered, the relay pulls in and disconnects after A time delay; Accumulative timing is triggered during delay. P-16: When triggered, the relay pulls in and disconnects after A time delay; Trigger reset (relay disconnection) during delay. P-17: When triggered, the relay pulls in during the signal duration, the input signal disappears, and the relay is disconnected after A time delay; During the delay, the relay is triggered again to keep the suction, and the timing stops until the last signal disappears, and the relay is disconnected after the delay of time A. P-18: After the power is switched on, the relay will pull in immediately and disconnect after A second delay; Until the next power cut. P-21: Signal feed, relay suction after delay A time. P-22: Give the continuous signal. After A time, the relay pulls in; The signal disappears and the relay disconnects. P-23: When the signal disappears beyond time A, the relay pulls in; There is a signal, the relay is off. P-24: Give the continuous signal. After A time, the relay pulls in; When the signal disappears beyond time A, the relay is disconnected. P-25: Give the continuous signal. After A time, the relay pulls in; Give the continuous signal again, after A time, the relay is disconnected P-26: Signal is given and the relay is disconnected after absorbing A time; After the signal disappears, the relay pulls in again for A second and then stops P-27: the relay with pulse signal (rising edge or falling edge) is disconnected, and there is no pulse signal. The relay will be absorbed after A time delay (both continuous high level and continuous low level are considered to have no pulse). P-28: After power on, the relay will pull in after delay time A until power off. P-31: After power on, the relay pulls in time A and disconnects time B, infinite cycle; The power is off. P-32: With continuous signal, the relay pulls in A time, disconnects B time, infinite cycle; The signal disappears and the loop is terminated. P-33: Give A signal, the relay pulls in A time, disconnects B time, infinite cycle; Give the signal one more time to stop the loop. P-34: After power on, the relay will pull in after delay time A, and disconnect after pull in time B. P-35: Signal is given once. After delay of time A, the relay pulls in and shuts off after time B. P-36: Give the continuous signal. After A time, the relay will pull in and disconnect after B time. Signal disappeared, time reset, relay disconnected. P-37: There is A signal. The relay will automatically disconnect after it pulls in time A, and then timing time B after it is disconnected. The signal trigger will be invalid within time A+B. P-38: There is A signal. The relay will automatically disconnect after absorbing A time, and then timing B time after disconnecting, and automatically disconnect after absorbing A time again. P-41: No action on signal; Signal vanishing trigger; The relay is disconnected after absorbing the delay time of A. P-42: the signal disappears and the relay pulls in after A time delay; The relay disconnects after B time delay. P-43: The signal disappears, and the relay pulls in after the disappearance exceeds time A; The relay disconnects after B time delay. P-44: After power on, the relay attracts time A and disconnects time B; The relay disconnects and stops after C cycles. P-45: No action after power on; After giving the signal, the relay attracts A time and disconnects B time; The relay disconnects and stops after C cycles. Give the signal, then execute again. P-46: When the signal is given more than A times, the relay pulls in; Keep the suction; The power is off. P-47: When the signal is given more than A times, the relay pulls in; Disconnect after suction B time. P-48: In C time, after continuous signal feeding for more than A times, the relay will disconnect and stop after absorbing B time. Table showing the position of the decimal point and the unit of time it represents: The decimal point is in the hundreds place, and the time range is 0.01~9.99 seconds Xx. X decimal point in ten place, time range 0.1~99.9 seconds XXX has no decimal point and the time range is 1-999 seconds XXX. The decimal point is in one place and the time range is 1-999 minutes Turn off display: In non-set state, press K4 to turn off the display screen, then press again to open it again. Description of working parameters setting: Hold down the K1 key and hold it until p-XX appears on the screen 2 seconds later. Press K2 and K3 to change the working mode. After selecting the working mode, press K1 to enter the time setting of A, and Axxx is displayed on the screen. At this time, press K2 and K3 to modify the time parameters of A, press K2 and K3 to add and subtract 1 for short, long to add and subtract 10 for fast, and press K4 to set the position of the decimal point. After setting time A, press K1 to set time B. BXXX is displayed on the screen. At this time, press K2 and K3 to modify time parameters of B; press K2 and K3 to add or subtract 1 for short; press K4 to add or subtract 10 for long; and press K4 to set the position of the decimal point. After setting the B time (in the case that the mode has C cycle number parameter), press K1 to set the C cycle number, and the screen shows Cxxx. At this time, press K2 and K3 to modify the C cycle number parameter, press K2 and K3 to add or subtract 1 for short, and press long to add or subtract 10 for fast. After setting, press the K1 key one last time to exit the setting state and save all parameters. Description of wiring port: DC+ input DC power positive pole DC- input DC power negative pole IN+ signal input positive pole IN- negative input terminal NO relay always start interface, relay suction and COM short connected, not closed suspension; COM relay common end interface Normally closed end interface of NC relay. When the relay fails to suck, it is short connected with COM. When the pull, it is suspended.