- Simply plug it into an outlet, select the timing mode, and set the temperature range. The temperature control range is -9~99℃/ 15.8°F~210.2°F, with an error of ±1% and a maximum output of 10A 2200W, - The thermostat timer adjusts modes based on the start and stop temperatures. If the start temperature is higher than the stop temperature, it enters cooling mode, and if it is lower, it enters heating mode, - The thermostat has a clear LCD that makes it easy to check the current temperature, set temperature, and remaining time, even in a dark environment. It also includes calibration and short-point memory functions for ease of use, - The green and red lights and alarm turn on simultaneously when the actual temperature exceeds 90 degrees. The device`s heat-resistant housing ensures safe and reliable operation, - With its compact and lightweight design, the temperature timer controller is easy to install and use in a variety of environments to control heating or cooling appliances such as refrigerators, freezers, ovens, or incubators, - Model: NF-567, - Sensing Probe: NTC 10K-1M senser, - Voltage: AC 50/60Hz Max 800W, - Overload Current: 10A, - Control Accuracy: ±1℃, - Control : -9~99℃, - Working Environment : -10~60℃, - Working Relative Humidity: 20~90%, - Level: IP20, - Function: When the actual is higher than 90℃. the indicators will flash to send, - OFF Memory Function: Yes, - Calibration Function: Yes, - Refrigeration control: Hot, - Heating Control: Cold, - Intermittent control function: Yes, - Countdown function:Yes, - Function when making an appointment: Yes, - Material: PC, - Item Size: 145 * 78 * 40 mm / 5.71 * 3.07 * 1.57 inch, - Package Size: 18 * 11 * 5 / 7.08 * 4.33 * 1.97 inch, - Package Weight: 360g / 12.7oz.

P16 XY-WTH1Temperature and humidity control module high precision digital display word double output automatic constant temperature and humidity control panel Product adopts industrial-grade chip, high-precision SHT20 temperature and humidity sensor. Product Function: Product features are two main types of classification: the functions of temperature and humidity; Function of temperature are as follows: The automatic identification of work mode: The system automatically according to the start/stop temperature, identify work mode; Start temperature > stop temperature, cooling mode`C`. Start temperature < stop temperature, heating mode `H`. Cooling mode: When the temperature≥Start temperature,relay conduction,red led on, refrigeration equipment begin to work; When the temperature≤Stop temperature,relay disconnect, red led off, refrigeration equipment stop to work; Heating mode: When the temperature≤Start temperature,relay conduction, red led on, heating equipment begin to work; When the temperature≥Stop temperature,relay disconnect, red led off, heating equipment stop to work; Temperature correction function OFE (-10.0 ~ 10℃): The system is working for a long time and may be biased, through this function correction, the actual temperature = measuring temperature + calibration value; How to set the start/stop temperature: 1. In the running interface, Long Press ` TM+ ` key more than 3 seconds, into the start temperature settings interface, can be modified by TM+ TM-key, to be modified, waiting for 6s automatic exit and save; 2. In the running interface, Long Press ` TM-` key more than 3 seconds, into the stop temperature settings interface,can be modified by TM+ TM-key, to be modified after the parameters, waiting for 6s automatic exit and save; The humidity function is as follows: The automatic identification of work mode: The system automatically according to the start/stop humidity, identify work mode; Start humidity> stop humidity, dehumidificationmode`D`. Start humidity< stop humidity, humidificationmode `E`. Dehumidificationmode: When the humidity≥Start humidity,relay conduction, green led on, dehumidification equipment begin to work; When the humidity≤Stophumidity,relay disconnect, green led off, dehumidificationequipment stop to work; Humidificationmode: When the humidity≤Start humidity,relay conduction, green led on, humidificationequipment begin to work; When the humidity≥Stophumidity,relay disconnect, green led off, humidificationequipment stop to work; Humidificationcorrection function RH (-10.0 ~ 10%): The system is working for a long time and may be biased, through this function correction, the actual humidity= measuring humidity+ calibration value; How to set the start/stop humidity: 1. In the running interface, Long Press ` RH+ ` key more than 3 seconds, into the start humiditysettings interface, can be modified by RH+ RH- key, to be modified, waiting for 6s automatic exit and save; 2. In the running interface, Long Press ` RH-` key more than 3 seconds, into the stop humiditysettings interface, can be modified by RH+ RH- key, to be modified after the parameters, waiting for 6s automatic exit and save; Running Interface Description: Working mode shows that the current mode (`H/C`, `E/d`) will be synchronized at the front of temperature/humidity, when the setting of temperature/humidity and stop temperature/humidity are completed. Any relay conduction, the upper-left corner of the interface display `out`, if the temperature relay conduction, the flashing display temperature working mode `H/C` to show reminders; if the humidity relay conduction, then flashing display humidity working mode `E/d`, as a reminder; Other features: Parameter remote read/set: Through the UART, set the starting temperature/humidity, stop temperature/humidity, temperature/humidity correction parameters; temperature/Humidity Real-time reporting: If the temperature/humidity reporting function is turned on, the product will detect the temperature/humidity and relay status by the 1s interval, and pass the UART to the terminal to facilitate data collection; Relay enabling (by default): If the relay is disable, the relay remains disconnected; How to modify the temperature/humidity correction value: 1. In the operating interface, double-click the ` TM+ ` key to enter the correction of the set interface, the downward display correction of the type, the upward display of specific values; (OFE: Temperature correction value RH: Humidity correction value) At this time by a short press ` TM-` key, switch to modify the parameters, through the RH+ RH-key, modify the specific value of the support long press short; 3. When the parameters have been modified, double-click the ` TM+ ` key, exit the correction positive setting interface, and save the data; How to enable/disable relay: In the running interface, Short press ` TM-` key,enable/disablethe temperature relay(ON: enableOFF:disable), back to the running interface, if the temperature relay is disable, the temperature symbol ` ℃ ` flashes to remind. In the running interface, Short press ` RH-` key, enable/disable the humidity relay (ON: enable OFF: disable), back to the running interface, if the humidity relay is disable, the humidity symbol `% ` flashes, as a reminder. Serial control(TTL level) BaudRate:9600bps Data bits :8 stop bits :1 crc :none Flow control :none

Auspuh za sve vrste motornih testera.Imam delove i za trimere.

Ova papuča je namenjena za prekidanje do 10A pri 250VAC. Nagazni deo i stope su gumirana, tako da sprečavaju proklizavanje pri gaženju. Trožilni vod se koristi za prekidanje, u zavisnosti od potrebe ima NO i NC vod. Šifra: H1111

Opticki senzor (sonda, prekidač) renomiranog nemačkog proizvodjaca PEPPERL+FUCHS OBT200-18GM70-E5-V1 napajanje 10-30V DC osetljivost 10-200 mm, podesava se trimerom Povezivanje na konektor Ispravna, isprobana

Krst kardana 34,93x126,22mm Prvi broj označava prečnik čašice, a drugi dužinu krsta. Proizvodjač - KYK - Japan

Klizač ( KOLICA PMW 20 CC) za profilisanu šinu. * Linearne tehnologije * Kolica i šine su kompatibilne sa HIWIN-om * (KOLICA - HGW 20 CC) * (ŠINA - HGR 20 R) Kolica i šine se naručuju odvojeno. Maksimalna duzina odgovarajuće šine(PMH 20R) je 4000mm Sečemo na meru (plaćate samo željenu dužinu) Cena profilisane šine ŠINE je 6480,00 dinara po dužnom metru, u cenu je uračunat PDV.

Priključna kutija za elektro motor Sever ZK100, ZK112 Dimenzija spoljna: 106x106 mm Težina: 0,420 kg Proizvođač: Eldon grupa Smederevska Palanka PRODIZVODNJA REZERVNIH DELOVA ZA ELEKTRO MOTORE I PUMPE: PRIKLJUČNE PLOČE DO M16, VENTILATORI DO ZK400, PRIKLJUČNE KUTIJE SA POKLOPCIMA, DEKLOVI, PRIRUBNICE, OSOVINE, ŠAPE-NOGICE, ŠTITNICI-POKRIVAČI, RADNA KOLA, ČAURE, I DR. Pogledajte i druge proizvode koje prodajem preko Limunda/Kupinda.

Digitalni brojač - sa induktivnim senzorom ili tasterom Brojač koji može da se upotrebin na neograničen broj načina. Poseduje induktivni senzor za brojanje, ali je moguće umesto njega staviti i taster po želji. Poseduje dugme za pauziranje brojanja i reset dugme kako sa prednje strane tako i sa zadnje u vidu kontakata za taster koji može da se priključi u vidu nekog krajnjeg prekidača. Karakteristike: - Tip: brojač - Način rada: digitalan (napajanje mu je baterija 1.5V AA) - Broj cifara: 5 (od 0 do 99.999) - Induktivni senzor: 110 cm - Okruženje: -5~40 C - Minimalan impuls: 10 mS - Dimenzije: 64 x 38 x 38 mm - Dimenzije otvora: 61 x 36 mm U kompletu: - Brojač sa baterijom AA 1,5V - Induktivni senzor - Magnet za detekciju - Uputstvo za montažu

Ova pumpa je namenjena za cirkulaciju vode u sistemima solarnog grejanja vode. Može da se koristi i kao pumpa za pretakanje vode, ali treba voditi računa da pumpa nikad ne ostane bez vode. Radi na naponu od 12VDC. Visokog kvaliteta, dugog veka korištenja, niskog nivoa buke. Takođe treba voditi računa o pravilnom povezivanju napona. Pogrešno povezivanje može da ošteti motor, a pumpa neće raditi. Može da radi na bateriju (akumultor) ili na pretvarač napona (jednosmeran napon). NAPOMENE: 1. Pravilno povezati žice po bojama ili polaritet u džeku 2. Za korištenje pumpe, predlažem ugradnju prekidača, jer će se inače pumpa odmah uključiti, čim bude povezana na izvor napona. 3. Ne koristiti za agresivne tečnosti, kap što su napr. kiseline, jer će doći do oštećenja delova u pumpi. 4. Za vreme zimskog perioda, pumpu obavezno zaštititi od hladnoće. 5. Pumpu postaviti tako da usisni otvor (kod osovine) bude ispod nivoa tečnosti. Na taj način će se obezbediti da pumpa uvek bude `potopljena`. Tehničke karakteristike: - Model: ZYW680 - Radni napon: 12V DC - Priključci: 1/2` (pola cola) - muški navoj - Snaga: 19W - Protok: 800 litara/sat - Maksimalna visina dopremanja vode: 5 metara - Temperatura ambijenta: 1 do 60° C - Maksimalna temperatura: 100° C - Tip: horizontalna - Kabal: 1m sa 5,5mm ženskim džekom (spolja minus poraritet, iglica u sredini plus napona)

Zupcanici sa kosim zubima , MODUL 3 sa 25 ZUBA. Za zupčanik imamo i zupčastu letvu odgovarajućeg modula, koja se može seći na odgovarajuću dužinu

Digitalni komunikacioni modul za vodomere Ista mbus 19402 Nov, zapakovan u originalnoj kutiji.

Bimetal je nov nekoristen,bez fabricke ambalaze.

trofazno brojilo VF EMT,tip VF3AB04C,polovno,ispravno,korisceno.za sve informacije pitajte.

- Produžni (muško-ženski) šuko kabl, - Tip kabla: H05VV-F, - Poprečni presek provodnika: 3x1.5mm2, - Dužina: 20m, - Boja: bela, - Maksimalno opterećenje: 16A/3680W, - Nazivni napon: 250VAC - Stepen IP zaštite: IP20.

- Filter vazduha + regulator + mazalica za ulje - Protok vazduha: 1500 L/min - Deklarisani pritisak: do 10 bar - Velicine ulaza: 1/4, 3/8, 1/2 POGLEDAJTE I MOJE DRUGE PREDMETE NA LIMUNDU I KUPINDU SIFRA: ZZZ6

- Produžni (muško-ženski) šuko kabl, - Tip kabla: H05VV-F, - Poprečni presek provodnika: 3x1.5mm2, - Dužina: 20m, - Boja: oranž, - Maksimalno opterećenje: 16A/3680W, - Nazivni napon: 250VAC - Stepen IP zaštite: IP20.

- Kvalitetan tinol sa kalofonijumom, - Koristi se pri mekom lemljenju, - Sastav: Sn/Pb/Cu: 60%/38%/2%, - Kalofonijum: 2.2%, - Pakovanje: 250 g, - Proizvođač: Fluitin, - Dimenzije: 1.0 mm.

- Kvalitetan tinol sa kalofonijumom, - Koristi se pri mekom lemljenju, - Sastav: Sn/Pb/Cu: 60%/39%/1%, - Kalofonijum: 2.2%, - Pakovanje: 250 g, - Proizvođač: Stannol, - Dimenzije: 0.7 mm.

- Tinol žica za lemljenje, - Prečnik: 0.5mm - Pakovanje: 250gr, - Sa kalofonijumom, - Koristi se pri mekom lemljenju, - Sastav : Sn60%/Pb40%, - Kalofonijum: 2.2%, - Proizvođač: Somogyi.

- Kvalitetan tinol sa kalofonijumom, - Koristi se pri mekom lemljenju, - Sastav: Sn/Pb/Cu: 60%/39%/1%, - Kalofonijum: 2.2%, - Pakovanje: 250 g, - Proizvođač: Stannol, - Dimenzije: 1.0 mm.

Kutija za gasni rezni alat Kometa `TELEOPTIK` Zemun Jugoslavija,iz 80-tih godina,u dobrom je stanju.

Ovaj shield je namenjen za projekte gde je neophodna upotreba i CAN i RS485 protokola. Moguće ga je koristiti sa Arduino UNO ili Leonardo (tada je CAN komunikacija isključena!), NUCLEO, XNUCLEO (moguće koristiti i CAN i RS485 istovremeno). MAX3485 je zadužen za RS485 protokol dok se o CAN protokolu stara SN65HVD230. Napaja se sa 3.3V. Šifra: B1115

Grebenasti prekidač `RADE KONČAR` model APATOR 4G10,malo korišten. U-690V I-125A

Na prodaju Wifi smart pametni prekidac za garazna vrata, elektricne roletne itd.... Stanje novo, uvoz Svajcarska! Povezete prekidac sa vasim telefonom i preko aplikacije kontrolisite prekidac . Takodje mozete i na dodir direktno koristiti. Sadrzi 3 opcije: otvaranje, zatvaranje i pauza. Podrzava 2.4ghz wifi Easy installation: Neutral wire required, Australian type curtain switch size, pair for 2.4GHz Wi-Fi only, SAA certified; Voice control: Compatible with free app Jinvoo Smart in iOS/Android, works with Alexa, Google Assistant, you can control your curtain or ceiling fan with your voice. Remote control: Remote control by free app, wherever you are, you can control the curtain or ceiling fan at any time; Schedule: Timer and countdown schedules to set your smart curtain switch to automatically turn on or off the curtain or ceiling fan while you`re at home or away.