USB na Serijski UART i izvedbi SSOP-28. Cena se odnosi na jedan komad. Šifra: L1014

- Set termobužira bele boje, - Više veličina u paketu, - Za zaštitu delova gde se javlja velika razlika u prečniku, - Boja: bela, - Prečnik: 1.5-13 mm, - Skupljeni prečnik: 0.75-6.5 mm, - Temperatura skupljanja: 70°C do 125°, - Radna temperature: -55°C do 125°C, - Pakovanje: 30x1.5 / 30x2.5 / 20x4 / 10x6 / 6x10 / 4x13 kom/mm (dužina 100 mm).

Krst kardana KK 32x82 Prvi broj označava prečnik čašice, a drugi dužinu krsta

P14 2x16 LCD Display HD44780U Shield with push buttons Here we have a very popular LCD Keypad shield for the Arduino. It includes a 2x16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD. Analog Pin 0 is used to read the pushbuttons. The LCD shield supports contrast adjustment and backlit on/off functions. It also expands analog pins for easy analog sensor reading and display. Below the shield can be seen attached to an Arduino UNO. Operating Voltage : 5V 6 Push buttons Expanded Analog Pinout 2x16 LCD display blue backlight Supports contrast adjustment Backlit on/off functions

- Oznake (markeri) za kablove, - Namenjeni označavanju kablova radi lakšeg praćenja i pronalaženja istih u kablovskim instalacijama, - Materijal: Soft PVC, - Podržani provodnici do poprečnog preseka 6mm2, - Odgovara provodnicima prečnika 5.2 do 10mm, - Oznaka: `3`, - Boja:žuta, - Pakovanje 100 komada.

Dimer, regulator za naizmenicni (AC) napon za potrošace do 2000W . Upotrebljava se za regulaciju osvetljenja,regulaciju grejanja kod lemilica,grejalica, regulaciju broja okretaja kod bušilica, brusilica, usisivaca.. Specifikacija: -Ulaz napon napajanja: 110V ~ 250V AC -izlazni napon: 50V-250V (Izlazni napon < ili = Ulaznom naponu napajanja) -Maksimalna izlazna snaga: 2000W -Velicina: pribl. 47 * 35 * 27mm

P14 Product Features: Wide voltage power supply (6 ~ 30V) supports micro USB 5.0V power supply, easy to use; The interface is clear and simple, powerful, easy to understand, meet almost all your needs; There is a key stop function (STOP key), with reverse polarity protection, reverse polarity does not burn; Increase the sleep mode, it enables, without any operation within 5 minutes, turn off the monitor automatically; any key to wake up; You can set a different OP, CL, LOP parameters, which are independent of each other, were saved; All setup parameters are saved automatically power down. Product parameters: Operating voltage: 6--30V support micro USB 5.0V power supply The trigger source: high trigger (3.0V-24V) signal with no common ground system to improve anti-jamming capability of the system (also self-shorting common ground) Output capability: You can control the DC or AC within 30v 5A within 220v5A Quiescent Current: 20mA Operating Current: 50mA Timing range: 0.1 seconds -999 minutes continuously adjustable; Availability: more than 10 million times Working temperature: -40-85 Celsius ; size: 6.2 * 3.8 * 1.7cm with optocoupler isolation, enhanced anti-jamming capability, industrial grade circuit boards, set the parameters after power failure memory forever. Special Note: The relay outputs are passive contact, uncharged output to control a line-off role. Product Manual: Operating mode: P1: After the trigger signal, the relay is turned OP time, and then disconnect; in the OP time, as follows P1.1: Invalid signal triggered again P1.2: Re-timing signal is triggered again P1.3: Reset signal is triggered again, the relay off, stop the clock; P-2: to the trigger signal, the relay after time off CL, OP relay conduction time, after the counting is finished, disconnect relay; P3.1: After the trigger signal to the relay turned OP time, relay off CL time, then the operation cycle, to signal to the relay off, stop the clock once again within the loop; cycles (LOP) can be set; P3.2: After power without triggering signal, the relay is turned OP time, relay off CL time, cycle the operation; cycles (LOP) can be set; P-4: signal holding function if there is a trigger signal timing is cleared, the relay remains on; when the signal disappears, after timing OP disconnect relay; timer period, then there is a signal, the timing is cleared; Timing setting: After setting the parameter values in the mode selection screen by a short press STOP button, select the time range; XXX decimal point bits, timing range: 1 second to 999 seconds XX.X decimal point in ten, Timing range: 0.1 seconds to 99.9 seconds X.X.X. decimal full brightness, Timing range: 1 minute to 999 minutes For example, you want to set up OP is 3.2 seconds, then move the decimal point to ten, the digital display 03.2 Parameter Description: OP-time, CL off time, LOP cycles (1-999 times, `---` represents infinite loop) These parameters are independent of each other, but each of these common mode parameters, for example, P1.1 set OP-time is 5 seconds, the user wants to switch to P1.2 mode, then enter P1.2 set the appropriate parameters, OP It will be five seconds; In the main interface (display 000) Press SET button will display OP (CL, LOP) and the corresponding time XXX; If only OP mode (such as the mode P1.1, P1.2, P1.3) time, then press SET button will display only the OP and the corresponding time; If the pattern has OP, CL, LOP (such as the mode P3.1, P3.2) then press the SET button OP and the corresponding time, CL and the corresponding time, LOP and the corresponding number will be displayed; In the set mode, the main interface parameters by a short press the SET button can easily see the current mode set in, very convenient! Parameter Settings: First, determine the operating mode of the relay; The mode of operation of the relay, in the main interface (when the module is powered on, flashes the current work mode (P1.1 default mode), then enter the main interface) `long press SET button for 2 seconds after the release `to enter mode selection screen by press UP, DOWN buttons to select the mode to be set (P1.1 ~ P-4); After selecting the mode to be set (for example, P3.2) Press SET key to set the appropriate parameters, then the parameter to be set flashes (OP-time, CL off time, LOP cycles ( `- - `represents infinite loop)) by UP, DOWN to adjust the value, support long press (rapid increase or decrease) and press (increase or decrease one unit); setting the parameter value by a short press STOP button to select the decimal point position, select time range (corresponding time of 0.1 seconds to 999 minutes); short press sET key to set the next parameter of the current mode, the process above; After setting the parameters of the selected mode is good, press the SET button for 2 seconds after release, currently set mode will flash, and then return to the main screen, set the parameters of success is very simple! The main interface: In the relay does not work status display `000` (no decimal point), with a decimal point under relay state, very clear! Mode selection screen: Long press SET to enter, after setting is completed, press SET key to exit and return to the main interface is very simple! STOP key functions: Relays enable mode: ON: inner OP-time relay allows conduction; OFF: relay prohibit conduction is always closed; In the main interface, short press the STOP button to switch between ON and OFF, the current in which the state will flash, and then return to the main screen. (This feature is an emergency stop function, a key disconnect relay closed) Sleep mode: C-P Sleep mode: five minutes without any operation, the digital display automatically turns off, the normal operation of the program; O-d normal mode: digital display always open; Press STOP button for two seconds after the release, to switch C-P and O-d state, in which the current state of flashes and then return to the main screen.

Sklopka Siemens Sirius. Doneseno iz Nemacke.

P06 Uz modul ide i hladnjak! 1. Product Highlights: 1.1. Special architecture, support 2V low voltage input, no fear of low voltage, especially suitable for 18650 high power boosting; 2.2. The power is large, the input current can be up to 15A, the output current is 4A; when the input is 3.7V, the output power can reach 45W, and when the input is 12V, the output power can reach 80W; 2.3. Perfect protection mechanism, input anti-anti-burn, input over-current protection, input under-voltage protection, output anti-backflow, constant voltage and constant current, can be directly connected to battery charging; 2.4. High efficiency, dual-stage filtering and low ripple, reliable and stable performance! 2. Product parameters: Input voltage: 2 ~ 24V Output voltage: 3 ~ 30V, pay attention to the USB port and the output port directly connected, is the adjustable voltage port 3-30V, not 5V port! ! ! Input current: up to 15A Output current: Maximum 4A (CC point device is the limit current adjustment potentiometer. When the current limit is reached, the CC indicator lights up and enters the constant current mode; the product is the boost structure. The regulation limit current cannot be directly shorted to the output terminal, but can be counterclockwise first. Adjust to the minimum, turn the clock clockwise and increase the current) Output power: 3.7V input, maximum 45W; 12V input, maximum power 80W; Output ripple: two-stage filtering, low ripple output! Conversion efficiency: 82~95% Input overcurrent protection: 15A fuse Input anti-reverse protection: high efficiency MOS type Input undervoltage protection: To prevent overdischarge of the lithium battery, please solder the 5.6k resistance resistor at R22 in the lower left corner of the module, starting above 3.5V and stopping below 3V. The factory default works at 2V voltage. If other levels of undervoltage protection threshold are required, you can calculate it yourself, or contact customer service. The calculation formula is R22=12500/(U-0.75v) ohm, where U is the desired undervoltage protection threshold voltage (stop Voltage). Board size: 80*31.5*20.5mm Weight: 36g 3. Note: 3.1. This product is a boost structure. The regulation limit current cannot be directly shorted to the output terminal. The CC potentiometer can be adjusted to the minimum counterclockwise. After the battery is connected, it can be rotated clockwise to increase the current. 3.2. This product is a boost structure. The minimum output voltage is approximately equal to the input voltage, so the output current cannot be set from 0. The minimum output current is approximately the input voltage divided by the load resistance value. 3.3. Module input IN-disable and output OUT-short, otherwise the constant current function will be invalid. 3.4. Please ensure that the power of the power supply is greater than the power required by the output load. Please reduce the power usage when the module is hot! 3.5.USB output port is not 5V output, directly connected to the output port, the highest adjustable voltage to 30V, such as charging mobile phones or other digital products or compatible with your other valuable instruments, clear the USB output voltage, any damage caused by us Without warranty, we only have the ability to pay for the module and shipping costs. Please read the product description carefully before using it. Damage caused by improper use will not be compensated.

PRODUŽNI KABEL SA 3 UTIČNICE i 3 METARA DUŽINE 3X1.5 KABEL KVALITETNO

PRODUŽNI KABEL SA Prekidačem Sa 3 UTIČNICE i dužine 1.5 METARA 3x1.5 kabel Kvalitetno

- Nekorozivni tečni fluks za SMD lemljenje, - Pakovanje: 100ml.

- Set termobužira plave boje, - Više veličina u paketu, - Za zaštitu delova gde se javlja velika razlika u prečniku, - Boja: Plava, - Prečnik: 1.5-13 mm - Skupljeni prečnik: 0.75-6.5 mm, - Temperatura skupljanja: 70°C do 125°, - Radna temperature: -55°C do 125°C, - Pakovanje: 30x1.5 / 30x2.5 / 20x4 / 10x6 / 6x10 / 4x13 kom/mm (dužina 100 mm).

- Set termobužira crne boje, - Više veličina u paketu, - Za zaštitu delova gde se javlja velika razlika u prečniku, - Boja: Crna, - Prečnik: 1.5-13 mm, - Skupljeni prečnik: 0.75-6.5 mm, - Temperatura skupljanja: 70°C do 125°, - Radna temperature: -55°C do 125°C, - Pakovanje: 30x1.5 / 30x2.5 / 20x4 / 10x6 / 6x10 / 4x13 kom/mm (dužina 100 mm).

- Za lemljenje kalajem na sve legure bakra, gvožđa, nikla, cinka.., - Pakovanje: 30gr.

- Set termobužira zelene boje, - Više veličina u paketu, - Za zaštitu delova gde se javlja velika razlika u prečniku, - Boja: Zelena, - Prečnik: 1.5-13 mm, - Skupljeni prečnik: 0.75-6.5 mm, - Temperatura skupljanja: 70°C do 125°, - Radna temperature: -55°C do 125°C, - Pakovanje: 30x1.5 / 30x2.5 / 20x4 / 10x6 / 6x10 / 4x13 kom/mm (dužina 100 mm).

- Set termobužira žute boje, - Više veličina u paketu, - Za zaštitu delova gde se javlja velika razlika u prečniku, - Boja: Žuta, - Prečnik: 1.5-13 mm, - Skupljeni prečnik: 0.75-6.5 mm, - Temperatura skupljanja: 70°C do 125°, - Radna temperature: -55°C do 125°C , - Pakovanje: 30x1.5 / 30x2.5 / 20x4 / 10x6 / 6x10 / 4x13 kom/mm (dužina 100 mm).

- Set termobužira crvene boje, - Više veličina u paketu, - Za zaštitu delova gde se javlja velika razlika u prečniku, - Boja: Crvena, - Prečnik: 1.5-13 mm, - Skupljeni prečnik: 0.75-6.5 mm, - Temperatura skupljanja: 70°C do 125°, - Radna temperature: -55°C do 125°C, - Pakovanje: 30x1.5 / 30x2.5 / 20x4 / 10x6 / 6x10 / 4x13 kom/mm (dužina 100 mm).

- Bilo da se nalazi na radnom stolu, radionici, hi-fi sistemu, TV-u ili u automobilu, možete da koristite kablovske organizatore da stvorite red u grupi kablova - Ovaj set sadrži 5 različitih tipova (ukupno 8 komada) samolepljivih držača za držanje kablova što omogućava organizovanje više vrsta po potrebama korisnika, - Boja: Crna, - Dimenzije: Četvorostruki Š82 x V13 x D20 mm, četvorostruki drugi tip Š65 x V12 x D21 mm, trostruki Š52 x V12 x D20 mm, dvostruki Š35 x V12 x D35 mm, jednostruki Š28 x V15 mm, - Pakovanje: 3 x četvorostruki, 1 x trostruki, 2 x dvostruku, 2 x jednostruki, - Za kabel: Do 6 mm prečnika (četvorostruki, trostruki), do 7 mm prečnika (četvorostruki drugi tip, dvostruki), do 10 mm prečnika (jednostruki).

- Za lemljenje kalajem, na legure gvožđa, nikla, hroma..., - Nije namenjen za lemljenje na štampanim pločama, - Pakovanje: 40ml.

- Pogodno za industrijsko, lako lemljenje, - Za bakar, čelik, pocink, - Pakovanje: 50 g, - Proizvođač: Wolf`s.

- Za lemljenje u elektronici, - Sadrži sredstvo za omekšavanje, - Bezkiselinska smola koja ni nakon upotrebe ne nagriza površinu, - Pakovanje: 50 g, - Proizvođač: Wolf`s.

- Artikal: komandni prekidač / taster, - Model / Tip: GBW-22B 1-0-2, - Nazivna Struja: 10 A, - Konfiguracija Kontakta: 1 NO + 1 NC, - Nazivni Izolacioni Napon (Ui): 600 V, - Otpor Izolacije: ≥ 10 mΩ, - Otpornost Kontakta: ≤ 50 mΩ, - Dimenzije Otvora Za Ugradnju: Ø 22 mm otvor za prekidač/taster, - Temperatura Okruženja (ºC): -5 °C do +40 °C, - Broj Uključenja / Isključenja: 50 000, - IP Zaštita: IP 20.

Power Bank punjač sa LED Displejom Koristi 1 litijumsku bateriju od 3.7V ili više vezanih paralerno koje možete izvaditi iz Lap-topova ili drugog uređaja oznake (18650) Power Bank je modul na kojeg se priveže 1 ili više Litijumskih baterija i on postaje jedna celina to jest prenosni uredjaj za punjenje Mobilnih Telefona i ostalih uredjaja koji rade na 5V. Punjač-odnosno Adapter od mobilnog telefona utaknite na modulu i punite ga kao mobilni telefon. Kada modul napuni svoju bateriju možete ga poneti sa sobom i dopunjavati mobilne telefone i ostale uređaje koje rade na 5V tako što ćete u njegove USB konektore utaknuti vaš telefon ili neke druge uređaje. Karakteristike: - 2 x USB konektor 2,4A - Micro USB konektor - Type-C USB konektor - Lightning konektor - Dimenzije: 65 x 25 x 5 mm Features: Portable Mobile Power Supply Module. Supports 3 USB cables. Hold down the button after standby, LED digital display power supply. LED digital screen shows current battery power when charging. When discharging, the LED digital screen displays the current power, and the display saves about 30 seconds (double-click button to restore the display). After charging and discharging, the system will provide accurate battery instructions.

- Oznake (markeri) za kablove, - Namenjeni označavanju kablova radi lakšeg praćenja i pronalaženja istih u kablovskim instalacijama, - Materijal: Soft PVC, - Podržani provodnici do poprečnog preseka 6mm2, - Odgovara provodnicima prečnika 5.2 do 10mm, - Oznaka: `1`, - Boja:žuta, - Pakovanje 100 komada.