kompaktan set za krpljenje tubeles guma malih dimenzija i lagan, mozete ga smestiti u bilo kom dzepu set sadrzi : -drska (kutijica) - turpijica za obradu rupe - silo za ubacivanje zaptivnog konca - kljuc za autoventil - 5 zaptivna konca

Idealno za poklon, u metalnoj kutiji dobijate nov neotvoren sa celofanom preko.

Šifra: 74005 Komplet sadrži 7 komada zakrpe: 4 komad ovalnog oblika (24 x 35 mm) 2 komada okruglog oblika ( 15 mm) 1 komad ovalnog oblika (30 x 50 mm) 8 ml leka u tubi šmirgla 2 ventil gumice Komplet spakovan u plastičnoj kutiji dimenzija 105 x 60 x 20 mm Proizvode koje imamo na stanju saljemo istog dana ako se proizvod naruci do 13h, kasnije porudzbine ce biti poslate narednog dana. Ukoliko neki proizvod trenutno nemamo na stanju, oni ce nam stici u kratkom roku, 2-5 dana. Cim nam stigne bicete obavesteni i proizvod ce vam biti poslat. Saljemo Postexpressom pouzecem ili uplatom na nas tekuci racun. Prilikom narudzbine potrebno je da ostavite sledece vase podatke: -Ime i prezime -Postanski broj i mesto -Ulica i broj -Broj telefona Kontakt preko sajta CB, e-mail (biciklino@gmail. com), sms, viber, whatsapp ili poziv na 060/ 52 00 522 Trudimo se da opisi i slike proizvoda budu tacni, ali ne garantujemo da je sve bez greske zbog velikog obima proizvoda. Za sve nejasnoce stojimo na raspolaganju.

*** PROLEĆNA AKCIJA NA LIMUNDU *** Pogledajte moje aukcije s početnim cenama znatno nižim nego na Kupindu! https://www.limundo.com/Clan/crni_vatreni/SpisakAukcija *** BESPLATNA DOSTAVA AKO NARUČITE TRI ILI VIŠE PREDMETA NA KUPINDU *** !!! PROČITAJTE USLOVE PRODAJE !!! -> PREUZIMANJE, SLANJE, PLAĆANJE Set za popravku tubeless guma se sastoji od potrebnog alata, tri gumene zaptivke i specijalnog lepka. Jedan alat služi da se rupa ocisti i ošmirgla, kako bi se lepak i zaptivka bolje primili. Drugim alatom se zaptivka postavlja u rupu. Preko 1.000 predmeta, po najboljim cenama: http://www.kupindo.com/Clan/crni_vatreni/SpisakPredmeta/cena_ASC Slavine za kuhinju, kupatilo, dvoriste: http://www.kupindo.com/pretraga.php?Pretraga=slavina&Prodavac=crni_vatreni Rucni alat, za sve i svakoga: http://www.kupindo.com/pretraga.php?Prodavac=crni_vatreni&Grupa=388 Preko 1.000 predmeta, po najboljim cenama: http://www.kupindo.com/Clan/crni_vatreni/SpisakPredmeta/cena_ASC Slavine za kuhinju, kupatilo, dvoriste: http://www.kupindo.com/pretraga.php?Pretraga=slavina&Prodavac=crni_vatreni Rucni alat, za sve i svakoga: http://www.kupindo.com/pretraga.php?Prodavac=crni_vatreni&Grupa=388

Kompresor za gume + set za krpljenje guma + skalper + motorcangle + srafcigeri ima 2 cilindra i daleko je jaci od ostalih kompresora koji su sa jednim. Moze da se koristi na upaljac ali i direktno na akumulator. (12v-220v). Kompresor poseduje digitalni manometar i lampu. Dobijate i tri nastavka za pumpanje. Specifikacija -radi na 12v, -protok 60l u minut, -interval ukljucivanja od 15-30 minuta, -prosecno vreme pumpanja gume je 3 minuta.

Set alata Topeak Mini PT30 TT2583B Set alata Topeak Mini PT30 je precizno odrađen alat sa 30 funkcija koji može da reši skoro svaki drumski ili MTB kvar. profesionalnog kvaliteta, sa integrisanim alatima za popravku tubeless guma. Alat za lanac koji se može skidati, sa ugrađenim alatom za brzu spojnicu za uklanjanje i ponovnu instalaciju, sigurno se skladišti u kućištu Mini PT30. Telo od kovane legure. Savršeno za bilo koju popravku puta ili staze. Ključ za lanac radi sa svim lancima od 1-12 brzina, osim Campagnolo® 11-brzinskim HollowPin lancima. Specifikacija: Set alata Topeak Mini PT30 FUNKCIJE: 30 ALAT – MATERIJAL: Hrom -vanadijum čelik TEŽINA: 169 g Dimenzije: 7,4 k 4 k 1,9 cm / 2,9 ”k 1,6” k 0,7 ” Torbica: Neopren (TRK-T031) MATERIJAL TELA: Kovani aluminijum ALATI: Ključevi imbus 2L / 2.5 / 3 /4 /5 /6 /8 mm T10 / T15 / T25 Tork® ključevi Ključevi sa krakovima od 14G / 15G / Mavic M7 / Shimano® 4,5 mm CrMo čelični alat za lanac*, kuka za lanac, alat za glavnu kariku CrMo #2 krstasti odvijači / odvijači sa ravnom glavom Razvrtač guma, alat za umetanje gumice za tubeles Nazubljeni nož / testera, odstojnik za disk Za dodatne informacije može sms, mail, telefon. Pogledajte i ostale moje oglase. Oglas 8/32 Zbog velikog obima oglasnog prostora molim za razumevanje u slučaju greške u opisu oglasa, promene cene od strane uvoznika bez prethodne najave ili trenutne nepristupačnosti određenih proizvoda.

Rims 14 - 42 Inch Wheels up to 1600 kg - Ø 230 cm - 105 cm ↔ Mounting speed 2-speed | 5 + 10 rpm Bead breaker force 3300 kg / 32.360 kN Operation Electric-hydraulic Gear motor-chuck 3.3 - 4.0 kW Hydraulic pump 2.2 kW Optional 56 Inch extensions In wooden box L223 x W194 x H105 cm - 850 kg Voltage 400V (no compressed air required) Including Free accessoires Heavy duty truck tyrechanger for tube and tubeless tyres and rims of Construction- and earth moving equipment Agricultural tractors, vehicles and machines Trucks, tractor units and trailers City buses, coaches and commercial vehicles The control unit on the moving arm allows one to perform 12 automated movements driven by two heavy motors. You can change tyres at 5 or 10 rpm. TyreON T700 - delivered ready for operation Reliable and very powerful truck tire changer CE certified and 1 year warranty on all parts Compiled with Bucher Hydraulics - market leader in innovative drive technology Filled with hydraulic oil and fully tested before it is packed Comes with accessories to change truck tires directly Solid construction, completely finished with powder coating Very strong clamping and bead breaking force, controlled by joysticks Ready for use upon receipt, easy to install With a central lifting eye and floor anchoring holes With main switch, cord and power plug - no compressed air required! Optional: set of 4 chuck extensions - 56 Inch Stable operating pressure - optimum performance The allround TyreON T700 has a check valve in the middle of the hydraulic system. This valve ensures a constant operating pressure due all hydraulic movements are equal and can be used to their full power potential. The pressure on the hydraulic pump is reduced, allowing the machine to work optimally and have a longer technical lifetime. Reliable - 3 kW engine - for intensive use The TyreON T700 is a truck tyre changer for intensive use, the powerful mounting arm with the disc and the hinged hook is resistant to heavy loads. A plastic strip in a recess in the hook prevents wear and scratches on the (alloy) rim. The hinged parts are fitted with grease nipples, by lubricating each nipple the truck tyrechanger will operate smoothly and wear and tear is prevented. How it works - controller on moveable arm The controller allows one to operate 12 automated movements. You simply roll the wheel onto the ramp and the machine takes care of the rest. All-in-one ergonomic controller on movable arm with joysticks for precise adjustment Powerful 2-speed 4.0 kW electric motor for clockwise and anticlockwise rotation of the chuck Top quality 2.2 kW hydraulic aluminum gear pump manufactured by Bucher Hydraulics With a hydraulic ramp to move the wheel to and from the chuck Chuck with 4 hydraulic clamping arms of hardened steel for clamping and lifting the wheel The mounting arm moves hydraulically up and down The mounting arm is hydraulically movable and lockable at any position on the sliding carriage and moves horizontally by the hydraulic sliding carriage in both directions The mounting head with dish and hook can be turned manually and locks itself Truck mounting accessories available The techniques and possibilities of the TyreON T700 Technical details T700 (400V) For rims with size 14 - 42 Inch A Maximum wheel diameter 230 cm D Maximum width of the wheel 105 cm C Maximum wheel weight 1600 kg Clamping range (chuck) 11 - 114 cm (43 Inch) Bead breaker force 3300 kg / 32.160 kN F Operating pressure - hydraulic 200 Bar Performance hydraulic pump motor 2.2 kW F Performance gear motor - electric rotation of the chuck 3.3 - 4.0 kW E Mounting speed - rotation of the chuck - clockwise and anticlockwise 2 speed Rotations per minute of the chuck 5 - 10 rpm Number of automated movements by controller 12 movements Operating voltage of the controller 24 Volt (DC) Number of positions of the mounting arm on the sliding carriage stepless positions Weight 850 kg Noise level 55 - 70 dBA Rotating chuck with 4 self centering clamping arms ✓ Non return valve - continuous oil-pressure ✓ Grease nipples ✓ Second gear for high speed of all hydraulic movements (2nd foot pedal) - Voltage 400V - 3Ph Fuse 20A Footprint (length x width) 188 x 174 cm Delivery All functions of the TyreON T700 are tested carefully before the machine is packed in a sturdy wooden box with: The wired control unit with movable arm A grease gun and lubricant for the silding carriage etc. A set of plastic strips intended for in the mounting hook 2 tire levers, a tyresoap brush and a bucket tyresoap The installation and operating manual Hydraulic oil (hv-iso-32 is included) TyreON TRC ST rim clamp for trucks, agricultural and contsruction equipment Poruka Poruka

Rims 14 - 26 Inch Wheels up to 500 kg - Ø 160 cm - 78 cm ↔ Mounting speed 2-speed | 7 + 15 rpm Bead breaker force 3000 kg / 29.418 kN Operation Electric-hydraulic Gear motor-chuck 2.4 - 3.0 kW Hydraulic pump 2.2 kW Model Compact In wooden box L183 x B149 x H109 cm - 670 kg Voltage 400V (no compressed air required) Including Free accessoires Compact Heavy duty compact truck tyrechanger for tube and tubeless tyres and rims of Trucks, tractor units and trailers City buses, coaches and commercial vehicles Comes with a 3.0 kW motor suitable for intensive use and powerfully changing of tyres with 7 rpm or 15 rpm. The most powerful, compactand fast changer in the market. TyreON T6002 - delivered ready for operation Reliable and very powerful truck tire changer CE certified and 1 year warranty on all parts Compiled with Bucher Hydraulics - market leader in innovative drive technology Filled with hydraulic oil and fully tested before it is packed Comes with accessories to change truck tires directly Solid construction, completely finished with powder coating Very strong clamping and bead breaking force, controlled by joysticks Ready for use upon receipt, easy to install With a central lifting eye and floor anchoring holes With main switch, cord and power plug - no compressed air required! Grease nipples - plastic strip prevents scratches The allround TyreON T600C2 is a truck tyre machine for intensive use and is equipped with a powerful mounting arm with a disc and a hinged hook resistant to heavy loads. A plastic strip in the recess in the hook prevents wear and scratches on the (alloy) rim. The hinged parts are fitted with grease nipples, by lubricating the nipples the truck tyrechanger will work smoothly and wear and tear is prevented. Floor plate under entire machine - optimum performance With a footprint of 1.70 x 1.35 meters and a floor plate under the entire machine to collect grease and dirt. This very compact truck tyre changer is also suitable for small workshops and mobile applications and comes with a central check valve in its hydraulic system to maintain the operating pressure. Optimum performance due all hydraulic movements are smooth and full powered plus the longer technical lifetime of the hydraulic pump. Operation - hydraulic sliding carriage The portable controller allows you to perform 8 movements. You simply roll the wheel onto the ramp and the truck tyrechanger carries out the heavy part of the job. Handy 24V ergonomic control unit with emergency stop, joysticks and foot pedal Powerful 2-speed 3.0 kW electric motor for the clockwise and anticlockwise rotation of the chuck Top quality 2.2 kW hydraulic aluminum gear pump manufactured by Bucher Hydraulics With a hydraulic ramp to move the wheel to and from the chuck Chuck with 4 hydraulic clamping arms of hardened steel for clamping and lifting the wheel The mounting arm can be locked manually in 3 positions on the sliding carriage and moves horizontally by the hydraulic sliding carriage in both directions The mounting head with disc and hook is rotated by hand and locks itself Truck mounting accessories available The techniques and possibilities of the TyreON T600C2 Technical details T600C2 (400V) For rims with size 14 - 26 Inch A Maximum wheel diameter 160 cm D Maximum width of the wheel 78 cm C Maximum wheel weight 500 kg Clamping range (chuck) 11 - 70 cm (27 Inch) Bead breaker force 3000 kg / 29.418 kN F Operating pressure - hydraulic 200 Bar Performance hydraulic pump motor 2.2 kW F Performance gear motor - electric rotation of the chuck 2.4 - 3.0 kW E Mounting speed - rotation of the chuck - clockwise and anticlockwise 2 speed Rotations per minute of the chuck 7 - 15 rpm Number of automated movements by controller 8 movements Operating voltage of the controller 24 Volt (DC) Number of positions of the mounting arm on the sliding carriage 3 positions Weight 670 kg Noise level 55 - 70 dBA Rotating chuck with 4 self centering clamping arms ✓ Non return valve - continuous oil-pressure ✓ Grease nipples ✓ Second gear for high speed of all hydraulic movements (2nd foot pedal) - Voltage 400V - 3Ph Fuse 16A Required floorarea (length x width) 170 x 135 cm Delivery All functions of the TyreON T600C2 are tested carefully before the machine is packed in a sturdy wooden box with: The wired portable control unit A grease gun and lubricant for the sliding carriage etc. A set of plastic strips intended for in the mounting hook 2 tire levers, a tyresoap brush and a bucket tyresoap A widening floor plate The installation and operating manual Hydraulic oil (hv-iso-32 is included) TyreON TRC ST rim clamp for trucks, agricultural and construction equipment Poruka Poruka