Skoro nov Roadstar 12 Band Radio , model TRA-2973/N.Bez poklopca za baterije ,tako sam ga kupio.Bez baterija se prodaje.Model iz 2015 godine.Ima boju tona.Antena ispravna.Sa neta:For model FM/MW/SW 12 Bands Receiver TRA-2973/N, Roadstar; Japan Country: Japan Manufacturer / Brand: Roadstar; Japan Brand Roadstar El. GmbH Year: 2013 Category: Broadcast Receiver - or past WW2 Tuner Semiconductors (the count is only for transistors) Semiconductors present. Main principle Superheterodyne (common) Wave bands Broadcast, more than 2 SW bands plus FM or UHF. Details Power type and voltage Batteries / addl. power jack / UM3: 4 x 1.5 / DC 6 Volt Loudspeaker Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil) / Ø 5.5 cm = 2.2 inch Power out 0.2 W (undistorted) from Radiomuseum.org Model: FM/MW/SW 12 Bands Receiver TRA-2973/N - Roadstar; Japan Material Modern plastics (no Bakelite or Catalin) Shape Very small Portable or Pocket-Set (Handheld) < 8 inch. Dimensions (WHD) 175 x 110 x 30 mm / 6.9 x 4.3 x 1.2 inch Notes FM/AM/SW analog tuner. Telescopic antenna. Carrying pouch and earphone. 10 SW bands: 3.65 - 4.25 MHz, 4.55 - 5.25 MHz, 5.85 - 6.55 MHz, 6.95 - 7.65 MHz, 9.10 - 10.55 MHz, 11.40 - 12.45 MHz, 12.75 - 13.90 MHz, 14.60 - 16.00 MHz, 17.10 - 18.80 MHz, 20.55 - 22.50 MHz AM range: 526 - 1620 kHz FM range: 87.5 - 108 MHz Made in P.R.C. (China) Net weight (2.2 lb = 1 kg) 0.356 kg / 0 lb 12.5 oz (0.784 lb)

Šifra: AUANT-KSE18

Šifra: AUANT-KSC52

Šifra: AUANT-KS37351

Šifra: AUANTP-33220

Šifra: AUANT-KSC56

Polovan orginalan ispravan SANYO CD RADIO CASSETTE RECORDER daljinski , model S660.Bez baterija se prodaje.Imate sliku kad salje signal.

Polovan neispravan SANYO 3BAND RADIO CASSETTE RECORDER M1700H,Japan. Stanje kao sa slika.Antena orginalna i ispravna,nema tona ,vrti kasetu.Proban na baterije.Bez baterija se prodaje.

Šifra: AUANT-KSC72

Polovan neispravan SANYO 3BAND RADIO CASSETTE RECORDER M1700H,Japan. Stanje kao sa slika.Antena orginalna i ispravna,nema tona ,vrti kasetu.Proban na baterije.Bez baterija se prodaje.

GRASSLIN Famoso 601 - samo analogni termostat BEZ PRIJEMNIKA KOGA NEMAM (kako izgleda vidi se na slici 4), dobro očuvan i ispravan, radi na dve baterije od 1.5V tipa AA koje nisu uključene u prodaju, stanje kao na slikama ... opis sa net-a : `Product Details Programmable Thermostat - Famoso 601 RF Battery powered programmable room thermostat intended to be fitted wherever a conventional room thermostat would normally be sited. The controller uses 868MHz radio frequency signals to communicate with the receiver, thereby controlling the boiler according to the customer’s time & temperature settings. The 868MHz band is newly licensed for low-power domestic control systems, and is very secure against interference or accidental operation. Adjacent installations will not be in conflict, because each commissioned control set initiates a unique address. The receiver is a wall-mounted device, with volt-free changeover contacts, and requires a 230v 50Hz mains supply. The receiver can either be fitted in place of, and connected to, existing room-thermostat wiring, or it can be installed immediately adjacent to the boiler. Battery powered (2 x LR6 alkaline) transmitter – no wiring necessary Familiar mechanical clock with captive tappets to set comfort and economy temperature periods Controls comfort and economy temperature levels – two ’dial-type’ thermostats variable between 5 – 30°C 24 hour programming, 15 minute minimum programming period Range in free space <50 metres. Range in typical dwelling 20 - 30 metres Secure 868MHz transmission frequency – immune from interference Receiver has L.E.D. status indicator and set-up button` Lično preuzimanje : KOD MENE KUĆI u BG na Senjaku ! Slanje : Post Express-om o trošku kupca ! ***** Pogledajte i ostalu moju prodaju na Kupindu, možda nađete nešto interesantno : http://www.kupindo.com/Clan/nin2/SpisakPredmeta

Polovan neispitan Filter za neki radio uredjaj(10 1655.034-01400).Stanje kao sa slika.Bez garancije i reklamacije ,ne znam zasta sluzi.

Polovan ispravan MEDION digitalni radio - sat - alarm.Stanje kao sa slika.Bez baterija se prodaje ,proban na baterije ,ima i ulaz za adapter od 7,5 volti.Ima pozadinsko osvetljenje ,koje se gasi posle 5-6 sekundi.Ima stelovanje vremena ,alarma ,kao i funkciju automatskog gasenja posle nekog vremena(90,80,70,60,50,40,30,20,10 minuta).Antena fabricka i ispravna ,ima tragove koriscenja.Model MD82157 iz 2009 godine.Ima prikljucak za slusalice.

Kod: w-10545721 – Set alata i pribora za skidanje delova enterijera i audio uređaja u automobilu

LAMPA EABC 80-H3 - RADIO LAMPA EABC 80-H3 Proizvodjac lampe je Tungsram. Lampa je kupljena u prodavnici u inostranstvu pre mnogo mnogo godina. Nikada nije upotrebljena. Slikao sam `noge` pa mozete pogledati kako izgledaju. Na fotografijama mozete pogledati detalje. Ako Vam nesto nije jasno ili smatrate da nisam napisao pitajte i ja cu Vam odgovoriti. SLANJE-ISPORUKA-DOSTAVA -Saljemo navedenom kurirskom sluzbom i postom (kao vrednosno pismo sa otkupninom). -Placanje kupljenog predmeta je moguce samo na navedene nacine. -Postanske troskove placa kupac prema tarifi odabrane poste. -Licno preuzimanje je iskljucivo na mojoj adresi. -Ostale varijante slanja i placanja mi za sada ne odgovaraju.

IC Audio pojačavač 4x 41W za auto Radio Flexiwatt 25

Modul koji moze mnogo toga da odradi kada je akumulator u pitanju. Moze da drzi ukljuceno ili iskljuceno rele u zadatim granicama, ukljuceno ili iskljuceno iznad/ispod zadatog napona, da se iskljuci kada se napuni akumulator itd... Ima mogucnost i serijske komunikacije. Kompletan opis rada je ispod na engleskom. Operating mode: Voltage upper limit: UL1, voltage lower limit nL1, the voltage upper limit is greater than the voltage lower limit (UL1> nL1) U-1: Charging measurement: When the measured voltage is lower than the lower limit voltage, the relay pulls above; the upper limit voltage, the relay is disconnected. U-2: charge measurement time control: set the charging time (OP); when the measured voltage is lower than the lower limit voltage, the relay pull, and then start the countdown OP time, the end of the timer, the relay off; when the measured voltage is higher than the upper limit voltage , The relay is disconnected. U-3: Discharge detection: When the measured voltage is lower than the lower limit voltage, the relay is off, above the upper limit voltage, the relay pulls; U-4: discharge detection time control: set the discharge time (OP); when the measured voltage is higher than the upper limit voltage, the relay pull, and then start the countdown OP time, the end of the timer, the relay off; when the measured voltage below the lower limit voltage , The relay is disconnected; U-5: voltage in the range, the relay pull: when the measured voltage between the upper and lower limits, the relay pull, the other circumstances open; U-6: voltage outside the interval, the relay pull: the measured voltage below the lower limit voltage or higher than the upper limit voltage, the relay pull, the other case the relay is off. Product parameters: 1: Power supply voltage: DC6--40V, voltage detection range DC 0--60V, suitable for less than 60V of the various batteries, voltage measurement error ± 0.1V. 2: charge and discharge time (OP) range: 0 - 999 minutes. How do I set parameters? First, according to their needs, to determine the requirements of the work model; According to the working mode of the relay, in the main interface (when the module is powered on, it will flash the current mode of operation, the default U-1 mode, and then enter the main interface) press the SET button for 2 seconds and then release, enter the selection Mode interface, UP, DOWN button to select the mode to be set (U-1 ~ U-6); After selecting the mode, assume that we have selected the U-1 mode and press the SET button to set the corresponding parameter. The parameter to be set will flash (UL1 voltage upper limit, nL1 voltage lower limit, OP conduction time), press UP, DOWN Key to increase or decrease, you can always press the key to quickly increase or decrease, press the SET button to set the current mode of the next parameter, the process above; Set the parameters, and then press the SET button for 2 seconds to release, the current setting mode will flash, and then return to the main interface, set the parameters of success! In the main interface, press the DOWN key to achieve voltage and time switching. Mode selection interface: press the SET button for a long time to enter the mode selection interface, set the finished, a long time press the SET button and then release the exit mode selection interface, back to the main interface. Additional features: Data upload: through the serial port to achieve data upload, interval 1s upload a voltage and run time, easy to post-data analysis; Serial port settings parameters: You can set the mode and parameters through the serial port, more convenient; An extra signal output, when the relay to meet the conditions, the output high, the other output low. Serial port control (TTL level communication) Communication standard: The baud rate is 115200 bps Data bits: 8 Stop bit: 1 Check digit: none Flow control: none Serial command: `U-1`: Operating mode (range U-1 to U-6) `000`: 0 - does not enable timing function, non-0 - enable timing function (range 001 to 999) `Dw02.9`: Set the lower limit voltage `Up10.1`: set the upper limit voltage (range 00.0V ~ 99.9V) `Get`: Get the current settings `On`: Allows the relay to turn on `Off`: Always turn off the relay `Start`: start uploading data `Stop`: stop uploading data The above command can be any combination of two, need to be separated by commas Such as: `dw02.9, up10.1` set the lower limit voltage 02.9V upper limit voltage 10.1V Upload Status: Test Voltage + On Time + Status `00.0V, 00: 00: 00, OP r n` 00.0V: Measured voltage 00:00:00: Relay on time Status: OP relay on, CL relay off STOP key function expansion: Relay enable mode: ON: OP conduction time, the relay allows conduction; OFF: The relay is disabled and is always off; Press the STOP button on the main interface to switch between ON and OFF, the current status will flash, and then return to the main interface. (This function is an emergency stop function, a key to disconnect the relay) Sleep mode: C-P sleep mode: within five minutes, without any operation, the digital tube automatically shut down the display, the program normal operation; O-d normal mode: digital tube is always open display; Press and hold the STOP button for 2 seconds to release, to achieve C-P and O-d state of the switch, the current state will flash, and then return to the main interface.

Polovan ispravan orginalan Sony RM-X211 daljinski za auto /CD/MP3/Radio.Imate sliku kad salje signal.Bez baterije se prodaje.Moguce slanje postom kao CC paketic po uplati na racun.

P16 Xy-t01 digital temperature controller high precision digital display temperature controller module refrigeration and heating Product functions: 1. Heating mode `H`: When the detection temperature ≤ the set temperature - return difference temperature, the relay is turned on and the heating equipment starts to work; When the detection temperature is ≥ the set temperature, the relay is disconnected and the heating equipment stops working; 2. Refrigeration mode `C`: When the detection temperature is ≥ the set temperature + return difference temperature, the relay is turned on and the refrigeration equipment starts to work; When the detection temperature is less than or equal to the set temperature, the relay is disconnected and the refrigeration equipment stops working; 3. High temperature alarm function ala: When the actual temperature is greater than or equal to the alarm temperature, the system will start the audible and visual alarm, disconnect the relay, and press any key to stop the audible and visual alarm; 4. Delayed start of OPH: After completing a normal heating or cooling work, the system starts to count T. only when t ≥ OPH, the system can carry out the next round of heating or cooling work; 5. Temperature correction function ofe (- 10.0 ~ 10.0 ℃): If the system works for a long time, there may be deviation. Through this function, the actual temperature = measured temperature + calibrated value; 6. Remote reading / setting of parameters: Start temperature, stop temperature, temperature correction and other parameters can be set through UART; 7. Real time temperature reporting: If the temperature reporting function is enabled, the product will transmit the detected temperature to the terminal through UART at an interval of 1s for data acquisition; 8. Relay enable (default on): If the relay is turned off and enabled, the relay remains disconnected; 9. Restore factory settings: Press stop and set for more than 3S at the same time to restore the factory setting; Operating mode / setting temperature / return difference temperature setting: 1. In the operation interface, briefly press the set key to enter the quick setting interface; 2. Press the temperature setting / difference key to enter the working mode setting interface (short time setting); 3. Use the up down key to modify the parameter value, and support short press / long press; 4. Press and hold set for more than 3S or for 6S without any key operation, exit the quick setting interface and save the parameters; Alarm temperature / delay start setting / temperature correction: 1. In the operation interface, long press set for more than 3S to enter the parameter setting interface; 2. After entering the parameter setting interface, briefly press the set key to switch the parameters to be set (alarm temperature / delayed start setting / temperature correction); 3. Use the up down key to modify the parameter value, and support short press / long press; 4. Press and hold set for more than 3S or for 6S without any key operation, exit the parameter setting interface and save the parameters; How to turn on high temperature alarm (off by default): Enter the parameter setting interface, switch to the alarm parameter ala interface, and turn on or off the high temperature alarm function by short pressing the stop key; If the high temperature alarm function is off, ALA displays` ---- `as a reminder; How to turn on delayed start (off by default): Enter the parameter setting interface, switch to the alarm parameter OPH interface, and turn on or off the high temperature alarm function by short pressing the stop key; If the high temperature alarm function is off, OPH displays` ---- `as a reminder; Serial port control (single chip microcomputer TTL level communication) Communication standard: 9600bps data bit: 8 Stop bit: 1 Check bit: None Flow control: None

price: No bid YOUR BID MUST BE AT LEAST 100 SEK Table cutter Värnamo machine Make: Värnamo machine Model: Unknown Electric motor: ball bearing Manufacturing number: 510996 Dimensions approximately: 102x128x119 cm PLEASE NOTE! This is a judicial sale since the objects belong to a bankruptcy. According to our terms it is therefore not possible to make a complaint regarding these objects All bids are binding and the service fee is charged on all items. Any deviations from equivalent second-hand goods are described under the section Remarks in the description of the Item and thus PS is not responsible for the deviation The item is NOT TESTED by the auction firm unless otherwise specified in the object description. The object description is done with the best of our knowledge but not binding in detail PLEASE NOTE! Any pallet and pallet accessories seen in the picture are not included unless otherwise stated in the description Shipping not available on this item No scheduled showings for this item. Expressions of interest can be sent to the responsible administrator Important info Since the bidder is obliged to inspect the item prior to the auction it is strongly recommended that the bidder attends the exhibition. PS is not responsible for the Customer neglecting its obligation of inspection Since the bidder is obliged to inspect the item prior to the auction it is strongly recommended that the bidder attends the exhibition. PS is not responsible for the Customer neglecting its obligation of inspection Friday 24 May 2024 10:00 - 12:00 UTC+02:00 Information regarding auction release Date: 2024-05-24 Time: 10.00 - 12.00 Address: will be on the invoice Check so you can attend the delivery before you bid Shipping is not possible on this auction The buyer is responsible for taking care of his purchased objects lifting/carrying help and other things that facilitate the delivery on the appointed day and time Premises are on the ground floor Questions regarding the delivery contact customer service Important info Payment must have been received by us before you can pick up the goods so pay in time Invoice copy and proof of payment must be brought to the pick up. The buyer shall at the appointed time arrange collection any disassembly / packing of the item PLEASE NOTE! Any pallet and pallet accessories seen in the picture are not included unless otherwise stated in the description Payment must have been received by us before you can pick up the goods so pay in time Invoice copy and proof of payment must be brought to the pick up. The buyer shall at the appointed time arrange collection any disassembly / packing of the item PLEASE NOTE! Any pallet and pallet accessories seen in the picture are not included unless otherwise stated in the description Bankruptcy PLEASE NOTE! This is a judicial sale since the objects belong to a bankruptcy. According to our terms it is therefore not possible to make a complaint regarding these objects Poruka Poruka

Modul Vu metra koji kontrolise mikrokontroler a na sebi ima dva reda po 24 RGB led diode. Ima vise modova, sve moze da se isprogramira i izgleda izuzetno u radu. Napaja se sa 5V i moze da se upari sa daljnskim. Specifications: Power Supply: DC 5-6V/250mA (Maximum current is all LED open and the highest brightness, generally less than 100mA) Size: 100x34mm/3.94x1.34` Installed Hole Distance: 52mm/2.05` Hole Diameter: 3.2mm/0.13` (Note that around the mounting hole is preferable to use an insulating spacer) Using three color SMD LED, colorful, color flexible configuration, prefabricated a variety of color scheme, can set a color scheme specific to the color of each point, there are various design can choose, can adjust the brightness, the sensitivity adjustable, can set the infrared remote control self learning convenient control, (You need prepared infrared remote yourself, only supports theN/E/C, this format is more common, can take home try television, set-top boxes, I get home in nine receiver remote control, remote control, haier TV Tmall magic box remote control and a waste of VCD remote control test can be used, remote control of home electric fans and air conditioning remote control test can`t use). Audio signal: pick up the three lines on the headphone jack, respectively is a signal Ground (together with the power of the board negative) )left sound channel, right channel. After power on, in fact inside each led is red, green, blue three different colors LED integrated together, in addition to normal display red, green, blue three color, red and green can mixed yellow, red and blue can mixed magenta, green and blue can mixed cyan. in fact, If you have a closer look, you can see different colors of the led interior lights on, the picture can not take out this effect, two colors mixed into the color, Close look at the actual effect is not better than picture effect, far distance to see the same effect. Functional status and buttons operation: K1 and K2 two buttons, press have short press and long press two types. The following statement if not special said it need long press, it means short press. 1. Level Display Status: After power on, Level automatic display the brightness, pattern, color scheme and sensitivity of the last power off status. This state the button function: K1 / show pattern selection click in a pattern, pattern at the end of the cycle from the very beginning. K1 long press/to enter the pattern of color scheme selection state (note: the bottom upward emission pattern buttons on long press to enter the infrared learning state). K2 / sensitivity select click change sensitivity level, the order is the highest sensitivity. .. .. The lowest sensitivity > > sensitivity automatically return to the highest sensitivity. K2 long press/entered into a state of brightness adjustment. 2. Brightness adjustment status: The left 24 section bright display 8 red 8 green 8 blue, on the right shows the current brightness (red), 3 pieces according to grade 1, Toatl grade 8. This state the button functions: K1 / click the higher brightness level, the highest is all bright. K1 long press/return level the brightness of the display status and return before entering the set. K2 / brightness click on the lower level, the lowest level is the low end of the three led light. K2 long press/save the brightness of the set and returns the level display status. 3. Color scheme selection state: Left and right sides of each led all bright led displays the current color (Peak keep mode the top led color indicates the peak point color). This state the button functions: K1 / click the show next prefabricated color configuration scheme, the order is a scheme > > the current program, the last a prefabricated scheme > custom solutions (note that custom solutions when the factory is empty, that is, all black, the need to define the color of each dot) > prefabricated plan 1, so cycle. K1 long press/to save and select the current scheme return level display state. K2 / press with K1 instead choose order. K2 long press/to enter a custom color configuration status. 4. Custom color configuration status: Left and right side shows a custom color (Default red) (Peak keep mode the top led color indicates the peak point color), on the left side of the low end of the led flashing said the current led is selected. This state the button functions: K1 / click on the selected led moving up , the top the most low-end will move to another column. K1 long press/color change to the next, change order red, yellow, green, blue, blue, magenta, six colors cycle show. K2 / click on the selected led moves down a, the bottom will be moved to another column led one of the most high-end. K2 long according to save the current color scheme and returns a color scheme selection state. 5. Infrared learning key state: Enter the state of all lights all out K1 and K2 button press any returns level display status. Need N/E/C of the infrared remote control (the remote control need since with) general TV set-top boxes, such as remote control can try sure no air conditioning, remote control or a lot of N/E/C format, is actually use the four buttons on the remote control to the corresponding board K1 short press and press K2 short press and long according to the four functions. Since the learning process: the first is the K1 short according to the corresponding function, with the remote control of the sensor of the board (without getting too close to) press the button, if learn to work on the left will light up six led and into the K1 long according to the corresponding function learning state again press the corresponding K1 long press the remote control button again to add 6 led into the same process in order to learn the K2 short press and K2 long press after the four keys will automatically save and return to the level display status at that time you can use the remote control to control, convenient. If press buttons have no reaction, estimation is infrared remote control code format is not suitable for, can only change the remote control to try again.

brand: Packteam YOUR BID MUST BE AT LEAST 200 SEK Wrapping machine with rotating table Packteam PLEASE NOTE! This is a judicial sale since the objects belong to a bankruptcy. According to our terms it is therefore not possible to make a complaint regarding these objects All bids are binding and the service fee is charged on all items. Any deviations from equivalent second-hand goods are described under the section Remarks in the description of the Item and thus PS is not responsible for the deviation The item is NOT TESTED by the auction firm unless otherwise specified in the object description. The object description is done with the best of our knowledge but not binding in detail PLEASE NOTE! Any pallet and pallet accessories seen in the picture are not included unless otherwise stated in the description Shipping not available on this item Tuesday 21 May 2024 10:00 - 11:00 UTC+02:00 Svedjegatan 2 571 21 Nässjö Sweden Important info Since the bidder is obliged to inspect the item prior to the auction it is strongly recommended that the bidder attends the exhibition. PS is not responsible for the Customer neglecting its obligation of inspection Since the bidder is obliged to inspect the item prior to the auction it is strongly recommended that the bidder attends the exhibition. PS is not responsible for the Customer neglecting its obligation of inspection Friday 31 May 2024 09:00 - 15:00 UTC+02:00 Svedjegatan 2 571 21 Nässjö Sweden Important info Payment must have been received by us before you can pick up the goods so pay in time Invoice copy and proof of payment must be brought to the pick up. The buyer shall at the appointed time arrange collection any disassembly / packing of the item PLEASE NOTE! Any pallet and pallet accessories seen in the picture are not included unless otherwise stated in the description Payment must have been received by us before you can pick up the goods so pay in time Invoice copy and proof of payment must be brought to the pick up. The buyer shall at the appointed time arrange collection any disassembly / packing of the item PLEASE NOTE! Any pallet and pallet accessories seen in the picture are not included unless otherwise stated in the description Dismantling A company is shuting down some of its operations and need help with clearing the premises and selling equipment they no longer need. This differs from bankruptcy since it's a voluntary sale Poruka Poruka

brand: TP-502 YOUR BID MUST BE AT LEAST 200 SEK Belt machine TP-502 packing table bander defective wheel PLEASE NOTE! This is a judicial sale since the objects belong to a bankruptcy. According to our terms it is therefore not possible to make a complaint regarding these objects All bids are binding and the service fee is charged on all items. Any deviations from equivalent second-hand goods are described under the section Remarks in the description of the Item and thus PS is not responsible for the deviation The item is NOT TESTED by the auction firm unless otherwise specified in the object description. The object description is done with the best of our knowledge but not binding in detail PLEASE NOTE! Any pallet and pallet accessories seen in the picture are not included unless otherwise stated in the description Shipping not available on this item Tuesday 21 May 2024 10:00 - 11:00 UTC+02:00 Svedjegatan 2 571 21 Nässjö Sweden Important info Since the bidder is obliged to inspect the item prior to the auction it is strongly recommended that the bidder attends the exhibition. PS is not responsible for the Customer neglecting its obligation of inspection Since the bidder is obliged to inspect the item prior to the auction it is strongly recommended that the bidder attends the exhibition. PS is not responsible for the Customer neglecting its obligation of inspection Friday 31 May 2024 09:00 - 15:00 UTC+02:00 Svedjegatan 2 571 21 Nässjö Sweden Important info Payment must have been received by us before you can pick up the goods so pay in time Invoice copy and proof of payment must be brought to the pick up. The buyer shall at the appointed time arrange collection any disassembly / packing of the item PLEASE NOTE! Any pallet and pallet accessories seen in the picture are not included unless otherwise stated in the description Payment must have been received by us before you can pick up the goods so pay in time Invoice copy and proof of payment must be brought to the pick up. The buyer shall at the appointed time arrange collection any disassembly / packing of the item PLEASE NOTE! Any pallet and pallet accessories seen in the picture are not included unless otherwise stated in the description Dismantling A company is shuting down some of its operations and need help with clearing the premises and selling equipment they no longer need. This differs from bankruptcy since it's a voluntary sale Poruka Poruka

price: No bid YOUR BID MUST BE AT LEAST 100 SEK Broad band plaster Bogma KFY-M1100 Manufacturer: Bogma Model: KFY-M1100 Working width approximately 1100 mm Sand roller Sand aggregate Power approximately 15kW Dimensions approximately: 245x152x180 cm PLEASE NOTE! This is a judicial sale since the objects belong to a bankruptcy. According to our terms it is therefore not possible to make a complaint regarding these objects All bids are binding and the service fee is charged on all items. Any deviations from equivalent second-hand goods are described under the section Remarks in the description of the Item and thus PS is not responsible for the deviation The item is NOT TESTED by the auction firm unless otherwise specified in the object description. The object description is done with the best of our knowledge but not binding in detail PLEASE NOTE! Any pallet and pallet accessories seen in the picture are not included unless otherwise stated in the description Shipping not available on this item No scheduled showings for this item. Expressions of interest can be sent to the responsible administrator Important info Since the bidder is obliged to inspect the item prior to the auction it is strongly recommended that the bidder attends the exhibition. PS is not responsible for the Customer neglecting its obligation of inspection Since the bidder is obliged to inspect the item prior to the auction it is strongly recommended that the bidder attends the exhibition. PS is not responsible for the Customer neglecting its obligation of inspection Friday 24 May 2024 10:00 - 12:00 UTC+02:00 Information regarding auction release Date: 2024-05-24 Time: 10.00 - 12.00 Address: will be on the invoice Check so you can attend the delivery before you bid Shipping is not possible on this auction The buyer is responsible for taking care of his purchased objects lifting/carrying help and other things that facilitate the delivery on the appointed day and time Premises are on the ground floor Questions regarding the delivery contact customer service Important info Payment must have been received by us before you can pick up the goods so pay in time Invoice copy and proof of payment must be brought to the pick up. The buyer shall at the appointed time arrange collection any disassembly / packing of the item PLEASE NOTE! Any pallet and pallet accessories seen in the picture are not included unless otherwise stated in the description Payment must have been received by us before you can pick up the goods so pay in time Invoice copy and proof of payment must be brought to the pick up. The buyer shall at the appointed time arrange collection any disassembly / packing of the item PLEASE NOTE! Any pallet and pallet accessories seen in the picture are not included unless otherwise stated in the description Bankruptcy PLEASE NOTE! This is a judicial sale since the objects belong to a bankruptcy. According to our terms it is therefore not possible to make a complaint regarding these objects Poruka Poruka

price: No bid YOUR BID MUST BE AT LEAST 100 SEK Personal basket - SE equipment Sweden Manufacturer: SE equipment Sweden Permitted total weight: 350 kg Intended for 2 people Meets the requirements of SS 3628 PLEASE NOTE! This is a judicial sale since the objects belong to a bankruptcy. According to our terms it is therefore not possible to make a complaint regarding these objects All bids are binding and the service fee is charged on all items. Any deviations from equivalent second-hand goods are described under the section Remarks in the description of the Item and thus PS is not responsible for the deviation The item is NOT TESTED by the auction firm unless otherwise specified in the object description. The object description is done with the best of our knowledge but not binding in detail PLEASE NOTE! Any pallet and pallet accessories seen in the picture are not included unless otherwise stated in the description Shipping not available on this item No scheduled showings for this item. Expressions of interest can be sent to the responsible administrator Important info Since the bidder is obliged to inspect the item prior to the auction it is strongly recommended that the bidder attends the exhibition. PS is not responsible for the Customer neglecting its obligation of inspection Since the bidder is obliged to inspect the item prior to the auction it is strongly recommended that the bidder attends the exhibition. PS is not responsible for the Customer neglecting its obligation of inspection Wednesday 29 May 2024 11:00 - 15:00 UTC+02:00 ________________________________________________ Delivery of this item takes place Date: Wednesday 29/5 Time: 11:00 - 15:00 (please respect the set time as this is the time window we have to deal with) Address: Sent on infomail before extradition Things to consider: Come prepared with tools lifting equipment/carrying aid bags/boxes and a suitable vehicle for removal - to be able to handle what is to be collected ________________________________________________ Important info Payment must have been received by us before you can pick up the goods so pay in time Invoice copy and proof of payment must be brought to the pick up. The buyer shall at the appointed time arrange collection any disassembly / packing of the item PLEASE NOTE! Any pallet and pallet accessories seen in the picture are not included unless otherwise stated in the description Payment must have been received by us before you can pick up the goods so pay in time Invoice copy and proof of payment must be brought to the pick up. The buyer shall at the appointed time arrange collection any disassembly / packing of the item PLEASE NOTE! Any pallet and pallet accessories seen in the picture are not included unless otherwise stated in the description Bankruptcy PLEASE NOTE! This is a judicial sale since the objects belong to a bankruptcy. According to our terms it is therefore not possible to make a complaint regarding these objects Poruka Poruka