Na prodaju italijanska presa ZEPI , ZPM825 ( 2007 ). sa pogonom snage 300kW. Presa je remontovana, isporučuju se komplet sa matricama I rollerima, takođe u kompletu sa postoljem za presu i za pogon, zatim sa kondicionerom I dozatorom iznad presa – sve od inox-a.Isporuka bez elektrokomandnog ormara.Dodatne Informacije na 065 628 3311.

Rasipač mineralnog đubriva namenjen je za rasipanje suvog, mineralnog i granuliranog đubriva. Konstruisan je tako da omogućava jednomerno rasipanje po celoj širini, kao i posebno levu i desnu stranu. Ovakav rasipač je pogodan i za sejanje pšenice i ostalih žitarica, kao i za rasipanje soli u zimskim uslovima. Može biti plastificirani ili inox. Radi se u tri veličine:

Rasipač mineralnog đubriva namenjen je za rasipanje suvog, mineralnog i granuliranog đubriva. Konstruisan je tako da omogućava jednomerno rasipanje po celoj širini, kao i posebno levu i desnu stranu. Ovakav rasipač je pogodan i za sejanje pšenice i ostalih žitarica, kao i za rasipanje soli u zimskim uslovima. Može biti plastificirani ili inox. Radi se u tri veličine:

Tip: poluprikolica autocisterna Godina proizvodnje: 2022 Zapremina: 12000 l Ukupna težina: 22000 kg Lokacija: Mađarska Szekszárd Datum objavljivanja: više od 1 meseca Autoline ID: RQ37656 KOBZARENKO SAVÁLLÓ TARTÁLYKOCSI - RAKTÁRON VNC-12/2 NEM TÚLNYOMÁSOS INOX tartály 4 mm falvastagsággal, 18,2% CR tartalmú anyagból, hullámtörőkkel, 2/3” szerelvényekkel, hidromotor hajtású 2/2 vagy 3/3” HYPRO szivattyúval, műanyag tartályfedéllel, 550 mm-es tisztító nyílás a hátfalon. (Szívási mélység vízből 6 m, szállítási teljesítmény 2 m emelési magasságnál 600/1200 l/perc – 40 l/perc hidromotor átfolyásnál) TSP-20 tandem pótkocsi alváz parabolarugózással, rugózott vonórúd, hidraulikus támasztóláb, 100x100 mm-es fix ADR tengelyek parabolarugókkal, 2000 mm-es nyomtávval, 10 tőcsavaros kerékaggyal, 550/60-22,5 gumikkal. Tartálykapacitás 12000 l. Megengedett össztömeg: 22000 kg VNC-10/2 NEM TÚLNYOMÁSOS INOX tartály 4 mm falvastagsággal, 18,2% CR tartalmú anyagból, hullámtörőkkel, 2/3” szerelvényekkel, hidromotor hajtású 2/2 vagy 3/3” HYPRO szivattyúval, műanyag tartályfedéllel, 550 mm-es tisztító nyílás a hátfalon. (Szívási mélység vízből 6 m, szállítási teljesítmény 2 m emelési magasságnál 600/1200 l/perc – 40 l/perc hidromotor átfolyásnál) PBN-16 tandem átrakókocsi alváz, merev vonórúd, hidraulikus támasztóláb, 90x90 mm-es fix ADR tengelyek parabolarugókkal, 2100 mm-es nyomtávval, 8 tőcsavaros kerékaggyal, 16,5/70-18 gumikkal Tartálykapacitás 10000 l. Megengedett össztömeg: 16000 kg

Marka: Bata Model: L4BH 33.000LT NUOVA Tip: cisterna za prevoz hemikalija Godina proizvodnje: 2024 Zapremina: 33000 l Neto težina: 7500 kg Lokacija: Italija Ornago Datum objavljivanja: juče Autoline ID: TE37385 BATA/MENCI, TECNOKAR ADR CHEMICAL L4BH ADR CLASS 3-4.1-5.1-6.1-8-9 TANK MODEL BATA CHEMICAL ADR L4BH 316 STAINLESS STEEL CYLINDER MIRROR POLISHED STAINLESS STEEL COVERING CAPACITY 33,000LT. 3 COMPARTMENTS PRESSURE SYSTEM: 4 TEST BARS AND 3 WORKING BARS INSULATION OF 150°C 1 CENTRAL REAR OUTLET PIPE IN STAINLESS STEEL BOX 3 FOOT VALVES OF 100MM 3 MANLIDS IN 3 BOXES 3 AIR VALVES AND 3 SAFETY VALVES 2 DRAINAGE PIPES IN EACH BOXES ALUMINUM SLIP-RESISTANT PLATFORM FOLDABLE STAINLESS STEEL RAILING MENCI/TECNOCAR STEEL CHASSIS ABS, EBS PNEUMATIC SUSPENSION SAF/MERCEDES AXLES 1 LIFTING AXLE 6 ALCOA 22.5 ALUMINUM RIMS TIRES: 385/65/22.5 CONTINENTAL, BRIGESTONE TARE 7,500 KG ___________________________________________________________ BATA CISTERNE S.R.L. TANK CENTER IN ITALY VENDITA DI CISTERNE ALIMENTARI E CHIMICHE NUOVE ED USATE NOLEGGIO DI CISTERNE ALIMENTARI SALE OF NEW AND USED FOOD AND CHEMICAL TANKS RENTAL OF FOOD TANKS FOR ENGLISH / RUSSKII / BULGARSKI / ITALIANO / SRPSKI JOVAN JOVANOVIC BATA/MENCI, TECNOKAR ADR CHIMICO L4BH ADR CLASSE 3-4.1-5.1-6.1-8-9 CISTERNA MODELLO BATA CHIMICA ADR L4BH CILINDRO IN ACCIAIO INOX 316 RIVESTIMENTO IN ACCIAIO INOX LUCIDO A SPECCHIO CAPACITÀ 33.000LT. 3 SCOMPARTI IMPIANTO DI PRESSIONE: 4 BAR DI PROVA E 3 BAR DI LAVORO ISOLAMENTO DI 150°C 1 TUBO DI SCARICO POSTERIORE CENTRALE IN CASSETTA 3 VALVOLE DI FONDO DI 100MM 3 BOCCAPORTI IN 3 CASSETTE 3 VALVOLE DI SFIATO E 3 VALVOLE DI SICUREZZA 2 TUBI DI DRENAGGIO IN OGNI CASSETTA PASSERELLA ANTISCIVOLO RINGHIERA ABBATTIBILE IN ACCIAIO INOX TELAIO MENCI/TECNOCAR IN ACCIAIO ABS, EBS SOSPENSIONI PNEUMATICHE ASSALI SAF/MERCEDES 1 ASSE SOLLEVABILE 6 CERCHI IN ALLUMINIO ALCOA 22.5 GOMME: 385/65/22.5 CONTINENTAL, BRIGESTONE TARA 7.500 KG ___________________________________________________________ BATA CISTERNE S.R.L. TANK CENTER IN ITALY VENDITA DI CISTERNE ALIMENTARI E CHIMICHE NUOVE ED USATE NOLEGGIO DI CISTERNE ALIMENTARI SALE OF NEW AND USED FOOD AND CHEMICAL TANKS RENTAL OF FOOD TANKS FOR ENGLISH / RUSSKII / BULGARSKI / ITALIANO / SRPSKI JOVAN JOVANOVIC Tel. pokazati kontakte MOB. pokazati kontakte Mail. pokazati kontakte

Pasirka za voće sa odvajanjem koštica “Delta 1” – 1900 Pasirka za voće sa odvajanjem koštica “Delta 1” se koristi za pasiranje koštuničavog voća (šljive, kajsije i višnje). Mašina odvaja košticu od pulpe i istovremeno gnječi pulpu tako da se ona može koristiti za pravljenje džema ili alkoholnog pića. U košu pasirke za voće sa odvajanjem koštica “Delta 1” se nalazi puž koji ubrzava ubacivanje voća u deo mašine u kome se vrši proces odvajanja koštice. Pasirka se isporučuje sa standardnim sitom od 6 mm. Opciono, postoje sita od 1,2 mm do 12 mm. Materijal izrade je INOX.

Pasirka za voće sa odvajanjem koštica “Delta 0” – 1865 Pasirka za voće sa odvajanjem koštica “Delta 0” se koristi za pasiranje koštuničavog voća (šljive, kajsije i višnje). Mašina odvaja košticu od pulpe i istovremeno gnječi pulpu tako da se ona može koristiti za pravljenje džema ili alkoholnog pića. U košu pasirke za voće sa odvajanjem koštica “Delta 0” se nalazi puž koji ubrzava ubacivanje voća u deo mašine u kome se vrši proces odvajanja koštice. Pasirka se isporučuje sa standardnim sitom od 6 mm. Opciono, postoje sita od 1,2 mm do 12 mm. Materijal izrade je INOX.

Marka: Bata Model: STANDARD 31.000LT NON ISOLATA Tip: cisterna za prevoz hrane Godina proizvodnje: 2024 Zapremina: 31000 l Neto težina: 6180 kg Lokacija: Italija Ornago (MB) Datum objavljivanja: 3. 5. 2024. Autoline ID: ZU31448 BATA/MENCI, TECNOKAR BATA MODEL TANK 304 STAINLESS STEEL CYLINDER CAPACITY 31,000 LT. SINGLE COMPARTMENTS 1 OUTLET PIPE 1 FOOT VALVE OF 100MM 3 MANLIDS IN 3 BOXES 1 AIR VALVE AND 1 SAFETY VALVE 2 DRAINAGE PIPES ALUMINUM SLIP-RESISTANT PLATFORM FOLDABLE STAINLESS STEEL RAILING MENCI/TECNOCAR STEEL CHASSIS ABS, EBS PNEUMATIC SUSPENSION SAF/JOST AXLES 6 ALCOA 22.5 ALUMINUM RIMS TIRES: 385/65/22.5 CONTINENTAL, BRIGESTONE TARE 6,180 KG ________________________________________________________ BATA CISTERNE S.R.L. TANK CENTER IN ITALY VENDITA DI CISTERNE ALIMENTARI E CHIMICHE NUOVE ED USATE NOLEGGIO DI CISTERNE ALIMENTARI SALE OF NEW AND USED FOOD AND CHEMICAL TANKS RENTAL OF FOOD TANKS FOR ENGLISH / RUSSKII / BULGARSKI / ITALIANO / SRPSKI JOVAN JOVANOVIC BATA/MENCI, TECNOKAR CISTERNA MODELLO BATA CILINDRO IN ACCIAIO INOX 304 CAPACITÀ 31.000 LT. MONO SCOMPARTI 1 TUBO DI SCARICO 1 VALVOLA DI FONDO DI 100MM 3 BOCCAPORTI IN 3 CASSETTE 1 VALVOLA DI SFIATO E 1 VALVOLA DI SICUREZZA 2 TUBI DI DRENAGGIO PASSERELLA ANTISCIVOLO RINGHIERA ABBATTIBILE IN ACCIAIO INOX TELAIO MENCI/TECNOCAR IN ACCIAIO ABS, EBS SOSPENSIONI PNEUMATICHE ASSALI SAF/JOST 6 CERCHI IN ALLUMINIO ALCOA 22.5 GOMME: 385/65/22.5 CONTINENTAL, BRIGESTONE TARA 6.180 KG __________________________________________________ BATA CISTERNE S.R.L. TANK CENTER IN ITALY VENDITA DI CISTERNE ALIMENTARI, CHIMICHE, BENZINA/DIESEL, PER BITUME... DI VARI ANNI E CAPACITA' WE SELL FOOD, CHEMICAL, DIESEL/OIL, BITUMEN TANKS.... WITH DIFFERENT CAPACITIES AND PRODUCTION YEARS FOR ENGLISH / RUSSKII / BULGARSKI / ITALIANO / SRPSKI JOVAN JOVANOVIC Tel. pokazati kontakte MOB. pokazati kontakte Mail. pokazati kontakte

Marka: LAG Model: CIMC IMO4 L4BH Tip: poluprikolica autocisterna Godina proizvodnje: 2024 Kapacitet podizanja: 34940 kg Neto težina: 4060 kg Ukupna težina: 39000 kg Lokacija: Nizozemska Roggel Datum objavljivanja: 14. 5. 2024. Autoline ID: GK39045 NEU VANHOOL CONTAINERCHASSIS 20FT ADR SWAP NEUE TANKCONTAINER CIMC 35000LITER ADR L4BH SCHWALLWANDE TARRA WEIGHT 7280KG Chassis + Container 20FT SWAP MODEL O-3-CC ADR EX/II-EX/III-FL-AT 5.360 Meter lang RADSTAND 8.77Meter BPW ECO PLUS ACHSE ACHSLAST 9000KG ALCOA LVL-ONE FEUERLOSCHER IN BOX NEUE Druck Tankcontainer IMO4 L4BH INOX 3.16 (1.4402) Ground Operated 4 Schwallwande (V-Baffles) 4 Domdeckel 1x 500mm 3x 300mm 3 Bar Arbeitsdruck Payload 34940KG Lehrgewicht 4060KG Digitales temperaturmesser NETTO EXPORT PREIS €58750 FUR ANFRAGE Lex Claessen pokazati kontakte pokazati kontakte

***STRAUS Potapajuća muljna pumpa 1950w - Seckalica + Plovak - Ima na stanju*** ***NOVO FABRICKI ZAPAKOVANO*** - Pozovite za informacije - Brko Alati: 0637580241 -------------------------------------------------------------------------------------------------------------------- - Nova muljna pumpa, inox, za prljavu vodu, s plivajucim prekidacem. Pumpa poseduje posebnu vrstu noza kojom melje sve sto uvuce u donji deo kucista (takozvanja seckalica). Plivajuci prekidac je zastita od pregorevanja, jer pumpa nesme da radi na “ suvo” . -------------------------------------------------------------------------------------------------------------------- - Karakteristike: 1950 W max dubina 8 m max visina 8 m precnik izlaza 2” – 52 mm izbacuje 8000 lit / h tezina 14 kg -------------------------------------------------------------------------------------------------------------------- - Najpovoljnije cene alata, svi alati su novi, ispravni i fabrički zapakovani. Šaljemo po celoj Srbiji AKS kurirskom službom po najpovoljnijim cenama dostave. Pozovite, poručite i pridružite se hiljadama zadovoljnih kupaca. - U ponudi imamo više modela alata, mašina i mnogih drugih proizvoda renomiranih proizvođača po najpovoljnijim cenama! ! Brko Alati: 0637580241

Pasirka izradjena od inoxa za voce i povrce snage 1.5/2,2/3 kw i jace . Kapacitet zavisi od vrste i zrelosti voca i povrca kao velicine masine i snage motora i vrste sita .Moguce poruciti i vecu masinu .sa raznim sitima i jacim motorima

Univerzalni međuredni kultivator na 6 redi ,razmak između redova 70-75 cm. Na hidraulično sklapanje,sa "S" oprugama i sa zaštitnim tanjirima. Cena je sa uračunatim PDV-om. Ovaj tip špartača je savremenija i monogo brže radi nego stariji tip. Ima mogućnosti postavljanje kutije za veštačko đubrivo ,to se dodatno plaća. Nudimo kutije za vešt.đubrivo od plastificiranog lima ,ili od inoxa. Za više informacije kontaktirajte nas! Vaš partner u poljoprivredi Agromerkur

Hidro presa VSPIX 80 – 1969 Hidro presa VSPIX 80 se koristi za stiskanje grožđa, jabuka i sličnog voća u sok i vino. Jednostavna za rad, samo je treba povezati sa dovodom vode iz kuće. Potreban pritisak za rad pumpe 2,5 do 3 bara (u zavisnosti od modela prese). Procedura presovanja je laka, brza i efikasna. Hidro presa VSPIX 80 je lake konstrukcije, poklopac, posuda i korpa su napravljeni od inoxa pa se lako održava čistoća.

Hidro presa VSPIX 170 – 1096 Hidro presa VSPIX 170 se koristi za stiskanje grožđa, jabuka i sličnog voća u sok i vino. Jednostavna za rad, samo je treba povezati sa dovodom vode iz kuće. Potreban pritisak za rad pumpe 2,5 do 3 bara (u zavisnosti od modela prese). Procedura presovanja je laka, brza i efikasna. Hidro presa VSPIX 170 je lake konstrukcije, poklopac, posuda i korpa su napravljeni od inoxa pa se lako održava čistoća.

Hidro presa VSPIX 120 – 1981 Hidro presa VSPIX 120 se koristi za stiskanje grožđa, jabuka i sličnog voća u sok i vino. Jednostavna za rad, samo je treba povezati sa dovodom vode iz kuće. Potreban pritisak za rad pumpe 2,5 do 3 bara (u zavisnosti od modela prese). Procedura presovanja je laka, brza i efikasna. Hidro presa VSPIX 120 je lake konstrukcije, poklopac, posuda i korpa su napravljeni od inoxa pa se lako održava čistoća.

Hidro presa VSPIX 250 – 1975 Hidro presa VSPIX 250 se koristi za stiskanje grožđa, jabuka i sličnog voća u sok i vino. Jednostavna za rad, samo je treba povezati sa dovodom vode iz kuće. Potreban pritisak za rad pumpe 2,5 do 3 bara (u zavisnosti od modela prese). Procedura presovanja je laka, brza i efikasna. Hidro presa VSPIX 250 je lake konstrukcije, poklopac, posuda i korpa su napravljeni od inoxa pa se lako održava čistoća.

Marka: Mas Trailer Tanker Model: 2024 CARBON STEEL ADR LUXURY MODEL Tip: poluprikolica autocisterna Zapremina: 30000 l Kapacitet podizanja: 25500 kg Neto težina: 7500 kg Ukupna težina: 33000 kg Lokacija: Turska KARATAY / KONYA Datum objavljivanja: juče Autoline ID: YF35994 ADR LUXURY MODEL TANKER DIMENSIONS: Length: 10850 mm Width: 2550 mm maximum Height 3750 mm Pin - Ground clearance: 1250 mm CHASSIS AND STRUCTURE: Chassis: Carbon steel 100x200x5mm box section Tanker Structure Monoblock 1 & 6 Compartments Tank capacity between 30.000 lt & 45.000 lt 4.2mm steel Tanker with ADR Axles 3 Saf brand axles are used, each with a capacity of 12 tons. Air suspension. The front axle is lifted and can be controlled from the driver's cab. BRAKE SYSTEM: Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed. ELECTRICAL SYSTEM: Aspöck Lighting Systems and Aspöck Bumper 2x7 pin sockets - 24V, lights according to SAE standards. Rear lights, side marker lights, brake warning lights and signal lights will be installed. There will be 2 tail and stop combination lights. 2 indicators will be installed. 1 license plate light. The electrical system complies with European standards and is flame retardant. PARKING LEGS OMS brand parking legs Including telescopic mechanical conveyor Dynamic lifting capacity : 25 tons Static lifting capacity : 50 tons Low gear position : 0.98 mm / RPM TIRES AND RIMS: 385/65/R22.5 STARMAX PETLAS, ( 6 pcs ) 11.75 x 22.5, JANTSA rim (6 pcs) KING-PIN: Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate. PAINTING: All parts are carefully cleaned before painting. First protective primer and epoxy is used for painting. Two coats of high quality paint are applied to the tanker. The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be considered as an extra cost. EMCO WHEATON or CİVACON manhole cover: It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The top plate is connected to the neck plate with sealed gaskets and screws. It is provided with standard connection points for mounting the vapor recycling valve, level sensor, measuring rod and vent. EMCO WHEATON or CIVACON pneumatic control unit It is installed inside the tank truck cabinet. The air system, which is drawn from the vehicle's air cylinders, is connected to the inlet of the control unit. It has separate buttons for each eye and a clock indicating the air pressure, it allows the system to operate during filling and emptying of the tank. EMCO WHEATON or CİVACON submersible valve: 3" standard type bottom valve is connected to the bottom of the tanker separately for each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank with the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminium (eteal 171), the gaskets, the Viton spring and the fasteners (inox) are made of chrome nickel and pressure and leak tests have been carried out. EMCO WHEATON or CİVACON-Api valve: It is mounted inside the cabinet, each compartment is separate in the tanker. It is used for filling and emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been made. ACCESSORIES 6 pieces of mudguards 1 wheel chock 1 6 kg fire extinguisher box 1 spare wheel space 1 water tank 30 lt. 1 Folding ladder Holder for two 3.5 m drain hoses Note: Please contact us for your production requests in special sizes. ADR LUXURY MODEL TANKER DIMENSIONS: Length: 10850 mm Width: 2550 mm maximum Height 3750 mm Pin - Ground clearance: 1250 mm CHASSIS AND STRUCTURE: Chassis: Carbon steel 100x200x5mm box section Tanker Structure Monoblock 1 & 6 Compartments Tank capacity between 30.000 lt & 45.000 lt 4.2mm steel Tanker with ADR Axles 3 Saf brand axles are used, each with a capacity of 12 tons. Air suspension. The front axle is lifted and can be controlled from the driver's cab. BRAKE SYSTEM: Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed. ELECTRICAL SYSTEM: Aspöck Lighting Systems and Aspöck Bumper 2x7 pin sockets - 24V, lights according to SAE standards. Rear lights, side marker lights, brake warning lights and signal lights will be installed. There will be 2 tail and stop combination lights. 2 indicators will be installed. 1 license plate light. The electrical system complies with European standards and is flame retardant. PARKING LEGS OMS brand parking legs Including telescopic mechanical conveyor Dynamic lifting capacity : 25 tons Static lifting capacity : 50 tons Low gear position : 0.98 mm / RPM TIRES AND RIMS: 385/65/R22.5 STARMAX PETLAS, ( 6 pcs ) 11.75 x 22.5, JANTSA rim (6 pcs) KING-PIN: Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate. PAINTING: All parts are carefully cleaned before painting. First protective primer and epoxy is used for painting. Two coats of high quality paint are applied to the tanker. The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be considered as an extra cost. EMCO WHEATON or CİVACON manhole cover: It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The top plate is connected to the neck plate with sealed gaskets and screws. It is provided with standard connection points for mounting the vapor recycling valve, level sensor, measuring rod and vent. EMCO WHEATON or CIVACON pneumatic control unit It is installed inside the tank truck cabinet. The air system, which is drawn from the vehicle's air cylinders, is connected to the inlet of the control unit. It has separate buttons for each eye and a clock indicating the air pressure, it allows the system to operate during filling and emptying of the tank. EMCO WHEATON or CİVACON submersible valve: 3" standard type bottom valve is connected to the bottom of the tanker separately for each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank with the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminium (eteal 171), the gaskets, the Viton spring and the fasteners (inox) are made of chrome nickel and pressure and leak tests have been carried out. EMCO WHEATON or CİVACON-Api valve: It is mounted inside the cabinet, each compartment is separate in the tanker. It is used for filling and emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been made. ACCESSORIES 6 pieces of mudguards 1 wheel chock 1 6 kg fire extinguisher box 1 spare wheel space 1 water tank 30 lt. 1 Folding ladder Holder for two 3.5 m drain hoses Note: Please contact us for your production requests in special sizes.

Marka: Mas Trailer Tanker Model: 2024 ALUMINIUM MEDIUM MODEL Tip: poluprikolica autocisterna Zapremina: 30000 l Kapacitet podizanja: 25500 kg Neto težina: 5500 kg Ukupna težina: 31000 kg Lokacija: Turska KARATAY / KONYA Datum objavljivanja: juče Autoline ID: JG36103 MEDIUM MODEL ALUMINIUM TANKER DIMENSIONS: Length: 10850 mm Width: 2550 mm maximum Height 3750 mm Pin - Ground clearance: 1250 mm CHASSIS AND STRUCTURE: Chassis: Carbon steel 100x200x5mm box section Tanker Structure Monoblock 1 & 5 Compartments Tank capacity between 30.000 lt & 40.000 lt 5.28mm aluminum alloy sheet Axles 3 local axles are used, each with a capacity of 12 tons. Air suspension. The front axle is lifted and can be controlled from the cab. BRAKE SYSTEM: Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed. ELECTRICAL SYSTEM: Saba brand 2x7 pin sockets - 24V, lights according to SAE standards. Rear tail lights, side marker lights, brake safety warning lights and signal lights will be installed. There will be 2 tail and stop combination lights. 2 indicators will be installed. 1 license plate light. The electrical system complies with European standards and is flame retardant. PARKING LEGS OMS brand parking legs Including telescopic mechanical conveyor Dynamic lifting capacity : 25 tons Static lifting capacity : 50 tons Low gear position : 0.98 mm / RPM TIRES AND RIMS: 385/65/R22.5 STARMAX PETLAS, (6 pieces) 11.75 x 22.5, JANTSA rim (6 pcs) KING-PIN: Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate. PAINTING: All parts are carefully cleaned before painting. First protective primer and epoxy is used for painting. Two coats of high quality paint are applied to the tanker. The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be reflected as an extra cost. KURTUBA manhole cover: It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. Standard ports are provided to mount the vapor recycling valve, level sensor, measuring rod, and vent. The diameter of the center opening manual cover is 250 mm. KURTUBA pneumatic control unit It is installed inside the tank truck cabinet. The air system drawn from the vehicle's air cylinders is connected to the inlet of the control unit. It has separate buttons for each eye and a clock indicating the air pressure, it allows to control the system during filling and emptying of the tank. KURTUBA Bottom Valve 3" Norm type bottom valve is connected to the bottom of the tanker separately to each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank on the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed. KURTUBA API valve: It is mounted inside the cabinet of the tanker, each compartment separately. It is used for emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed. ACCESSORIES 6 pieces of mudguards 1 wheel chock 1 6 kg fire extinguisher box 1 spare wheel space 1 water tank 30 lt. 1 folding ladder Holder for two 3.5 m drain hoses Note: Please contact us for your production requests in special sizes. MEDIUM MODEL ALUMINIUM TANKER DIMENSIONS: Length: 10850 mm Width: 2550 mm maximum Height 3750 mm Pin - Ground clearance: 1250 mm CHASSIS AND STRUCTURE: Chassis: Carbon steel 100x200x5mm box section Tanker Structure Monoblock 1 & 5 Compartments Tank capacity between 30.000 lt & 40.000 lt 5.28mm aluminum alloy sheet Axles 3 local axles are used, each with a capacity of 12 tons. Air suspension. The front axle is lifted and can be controlled from the cab. BRAKE SYSTEM: Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed. ELECTRICAL SYSTEM: Saba brand 2x7 pin sockets - 24V, lights according to SAE standards. Rear tail lights, side marker lights, brake safety warning lights and signal lights will be installed. There will be 2 tail and stop combination lights. 2 indicators will be installed. 1 license plate light. The electrical system complies with European standards and is flame retardant. PARKING LEGS OMS brand parking legs Including telescopic mechanical conveyor Dynamic lifting capacity : 25 tons Static lifting capacity : 50 tons Low gear position : 0.98 mm / RPM TIRES AND RIMS: 385/65/R22.5 STARMAX PETLAS, (6 pieces) 11.75 x 22.5, JANTSA rim (6 pcs) KING-PIN: Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate. PAINTING: All parts are carefully cleaned before painting. First protective primer and epoxy is used for painting. Two coats of high quality paint are applied to the tanker. The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be reflected as an extra cost. KURTUBA manhole cover: It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. Standard ports are provided to mount the vapor recycling valve, level sensor, measuring rod, and vent. The diameter of the center opening manual cover is 250 mm. KURTUBA pneumatic control unit It is installed inside the tank truck cabinet. The air system drawn from the vehicle's air cylinders is connected to the inlet of the control unit. It has separate buttons for each eye and a clock indicating the air pressure, it allows to control the system during filling and emptying of the tank. KURTUBA Bottom Valve 3" Norm type bottom valve is connected to the bottom of the tanker separately to each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank on the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed. KURTUBA API valve: It is mounted inside the cabinet of the tanker, each compartment separately. It is used for emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed. ACCESSORIES 6 pieces of mudguards 1 wheel chock 1 6 kg fire extinguisher box 1 spare wheel space 1 water tank 30 lt. 1 folding ladder Holder for two 3.5 m drain hoses Note: Please contact us for your production requests in special sizes.

Marka: Mas Trailer Tanker Model: 2024 ADR ALIMINUM LUXURY MODEL Tip: poluprikolica autocisterna Zapremina: 30000 l Kapacitet podizanja: 25500 kg Neto težina: 5400 kg Ukupna težina: 30900 kg Lokacija: Turska KARATAY / KONYA Datum objavljivanja: juče Autoline ID: VQ36103 LUXURY MODEL ADR ALUMINUM TANKER DIMENSIONS: Length: 10850 mm Width: 2550 mm maximum Height: 3750 mm Pin - Ground clearance: 1250 mm CHASSIS AND STRUCTURE: Chassis: Carbon steel 100x200x5mm box section Tanker Structure Monoblock 1 & 6 Compartments Tank capacity between 30,000 lt & 45,000 lt 5.28mm aluminum alloy sheet Tanker with ADR Axles 3 BPW or Saf brand axles are used, each with a load capacity of 12 tons. Air suspension. The front axle is lifted and can be controlled from the cab. BRAKE SYSTEM: Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed. ELECTRICAL SYSTEM: Aspöck lighting system and Aspöck bumper 2x7 pin sockets - 24V, lights according to SAE standards. Rear lights, side marker lights, brake safety warning lights and signal lights are installed. 2 tail and stop combination lights. 2 turn signal combination lamps are installed. 1 license plate light. The electrical system complies with European standards and is flame retardant. PARKING LEGS OMS brand parking legs Including telescopic mechanical conveyor Dynamic lifting capacity : 25 tons Static lifting capacity : 50 T TIRES AND RIMS: 385/65/R22.5 STARMAX PETLAS, (6 pieces) 11.75 x 22.5, JANTSA rim (6 pcs) KING-PIN: Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate. PAINTING: All parts are carefully cleaned before painting. First protective primer and epoxy is used for painting. Two coats of high quality paint are applied to the tanker. The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be considered as an extra cost. EMCO WHEATON or CİVACON manhole cover: It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. Standard ports are provided to mount the vapor recycling valve, level sensor, measuring rod, and vent. The center-opening manual lid has a diameter of 250 mm. EMCO WHEATON or CİVACON pneumatic control unit It is installed inside the tank truck cabinet. The air system, which is drawn from the vehicle's air cylinders, is connected to the inlet of the control unit. There are separate buttons for each eye and a clock indicating the air pressure, and it allows the system to operate during the filling and emptying of the tank. EMCO WHEATON or CIVACON submersible valve: 3" standard bottom valve is connected to the bottom of the tanker separately for each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank with the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminium (eteal 171), the gaskets, the Viton spring and the fasteners (inox) are made of chrome nickel and pressure and leak tests have been carried out. EMCO WHEATON or CİVACON-Api valve: It is mounted inside the cabinet, each compartment is separate in the tanker. It is used for filling and emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been made. ACCESSORIES 6 pieces of mudguards 1 wheel chock 1 6 kg fire extinguisher box 1 spare wheel space 1 water tank 30 lt. 1 Folding ladder Holder for two 3.5 m drain hoses Note: Please contact us for your production requests in special sizes. LUXURY MODEL ADR ALUMINUM TANKER DIMENSIONS: Length: 10850 mm Width: 2550 mm maximum Height: 3750 mm Pin - Ground clearance: 1250 mm CHASSIS AND STRUCTURE: Chassis: Carbon steel 100x200x5mm box section Tanker Structure Monoblock 1 & 6 Compartments Tank capacity between 30,000 lt & 45,000 lt 5.28mm aluminum alloy sheet Tanker with ADR Axles 3 BPW or Saf brand axles are used, each with a load capacity of 12 tons. Air suspension. The front axle is lifted and can be controlled from the cab. BRAKE SYSTEM: Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed. ELECTRICAL SYSTEM: Aspöck lighting system and Aspöck bumper 2x7 pin sockets - 24V, lights according to SAE standards. Rear lights, side marker lights, brake safety warning lights and signal lights are installed. 2 tail and stop combination lights. 2 turn signal combination lamps are installed. 1 license plate light. The electrical system complies with European standards and is flame retardant. PARKING LEGS OMS brand parking legs Including telescopic mechanical conveyor Dynamic lifting capacity : 25 tons Static lifting capacity : 50 T TIRES AND RIMS: 385/65/R22.5 STARMAX PETLAS, (6 pieces) 11.75 x 22.5, JANTSA rim (6 pcs) KING-PIN: Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate. PAINTING: All parts are carefully cleaned before painting. First protective primer and epoxy is used for painting. Two coats of high quality paint are applied to the tanker. The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be considered as an extra cost. EMCO WHEATON or CİVACON manhole cover: It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. Standard ports are provided to mount the vapor recycling valve, level sensor, measuring rod, and vent. The center-opening manual lid has a diameter of 250 mm. EMCO WHEATON or CİVACON pneumatic control unit It is installed inside the tank truck cabinet. The air system, which is drawn from the vehicle's air cylinders, is connected to the inlet of the control unit. There are separate buttons for each eye and a clock indicating the air pressure, and it allows the system to operate during the filling and emptying of the tank. EMCO WHEATON or CIVACON submersible valve: 3" standard bottom valve is connected to the bottom of the tanker separately for each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank with the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminium (eteal 171), the gaskets, the Viton spring and the fasteners (inox) are made of chrome nickel and pressure and leak tests have been carried out. EMCO WHEATON or CİVACON-Api valve: It is mounted inside the cabinet, each compartment is separate in the tanker. It is used for filling and emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been made. ACCESSORIES 6 pieces of mudguards 1 wheel chock 1 6 kg fire extinguisher box 1 spare wheel space 1 water tank 30 lt. 1 Folding ladder Holder for two 3.5 m drain hoses Note: Please contact us for your production requests in special sizes.

Marka: Mas Trailer Tanker Model: 2024 MODEL ALIMINIUM ADR PREMIUM TANKER Tip: poluprikolica autocisterna Zapremina: 30000 l Kapacitet podizanja: 25500 kg Neto težina: 5500 kg Ukupna težina: 31000 kg Lokacija: Turska KARATAY / KONYA Datum objavljivanja: juče Autoline ID: RN36103 PREMIUM MODEL ALUMINUM TANKER WITH ADR DIMENSIONS: Length: 10850 mm Width: 2550 mm maximum Height: 3750 mm Pin - Ground clearance: 1250 mm CHASSIS AND STRUCTURE: Chassis: Carbon steel 100x200x5mm box section Tanker Structure Monoblock 1 & 5 Compartments Tank capacity between 30.000 lt & 40.000 lt 5.28mm aluminum alloy sheet Tanker with ADR Axles 3 local axles are used, each with a capacity of 12 tons. Air suspension. The front axle is lifted and can be controlled from the cab. BRAKE SYSTEM: Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed. ELECTRICAL SYSTEM: Aspöck lighting system and Aspöck bumper 2x7 pin sockets - 24V, lights according to SAE standards. Rear lights, side marker lights, brake safety warning lights and signal lights are installed. 2 tail and stop combination lights. 2 turn signal combination lamps are installed. 1 license plate light. The electrical system complies with European standards and is flame retardant. PARK FEET OMS brand Park Feet Including telescopic mechanical conveyor Dynamic lifting capacity : 25 tons Static lifting capacity : 50 tons Low gear position : 0.98 mm / RPM TIRES AND RIMS: 385/65/R22.5 STARMAX PETLAS, ( 6 pcs ) 11.75 x 22.5, JANTSA rim (6 pcs) KING-PIN: Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate. PAINTING: All parts are carefully cleaned before painting. First protective primer and epoxy is used for painting. Two coats of high quality paint are applied to the tanker. The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be reflected as an extra cost. KURTUBA manhole cover: It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. Standard ports are provided to mount the vapor recycling valve, level sensor, measuring rod, and vent. The diameter of the center opening manual cover is 250 mm. KURTUBA pneumatic control unit It is installed inside the tank truck cabinet. The air system drawn from the vehicle's air cylinders is connected to the inlet of the control unit. There are separate buttons for each eye and a clock showing the air pressure, and it allows the system to operate when filling and emptying the tank. KURTUBA Bottom Valve 3" Norm type bottom valve is connected to the bottom of the tanker separately to each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank on the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed. KURTUBA API valve: It is mounted inside the cabinet of the tanker, each compartment separately. It is used for emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed. ACCESSORIES 6 pieces of mudguards 1 wheel chock 1 6 kg fire extinguisher box 1 spare wheel space 1 water tank 30 lt. 1 folding ladder Holder for two 3.5 m drain hoses Note: Please contact us for your production requests in special sizes. PREMIUM MODEL ALUMINUM TANKER WITH ADR DIMENSIONS: Length: 10850 mm Width: 2550 mm maximum Height: 3750 mm Pin - Ground clearance: 1250 mm CHASSIS AND STRUCTURE: Chassis: Carbon steel 100x200x5mm box section Tanker Structure Monoblock 1 & 5 Compartments Tank capacity between 30.000 lt & 40.000 lt 5.28mm aluminum alloy sheet Tanker with ADR Axles 3 local axles are used, each with a capacity of 12 tons. Air suspension. The front axle is lifted and can be controlled from the cab. BRAKE SYSTEM: Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed. ELECTRICAL SYSTEM: Aspöck lighting system and Aspöck bumper 2x7 pin sockets - 24V, lights according to SAE standards. Rear lights, side marker lights, brake safety warning lights and signal lights are installed. 2 tail and stop combination lights. 2 turn signal combination lamps are installed. 1 license plate light. The electrical system complies with European standards and is flame retardant. PARK FEET OMS brand Park Feet Including telescopic mechanical conveyor Dynamic lifting capacity : 25 tons Static lifting capacity : 50 tons Low gear position : 0.98 mm / RPM TIRES AND RIMS: 385/65/R22.5 STARMAX PETLAS, ( 6 pcs ) 11.75 x 22.5, JANTSA rim (6 pcs) KING-PIN: Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate. PAINTING: All parts are carefully cleaned before painting. First protective primer and epoxy is used for painting. Two coats of high quality paint are applied to the tanker. The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be reflected as an extra cost. KURTUBA manhole cover: It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. Standard ports are provided to mount the vapor recycling valve, level sensor, measuring rod, and vent. The diameter of the center opening manual cover is 250 mm. KURTUBA pneumatic control unit It is installed inside the tank truck cabinet. The air system drawn from the vehicle's air cylinders is connected to the inlet of the control unit. There are separate buttons for each eye and a clock showing the air pressure, and it allows the system to operate when filling and emptying the tank. KURTUBA Bottom Valve 3" Norm type bottom valve is connected to the bottom of the tanker separately to each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank on the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed. KURTUBA API valve: It is mounted inside the cabinet of the tanker, each compartment separately. It is used for emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed. ACCESSORIES 6 pieces of mudguards 1 wheel chock 1 6 kg fire extinguisher box 1 spare wheel space 1 water tank 30 lt. 1 folding ladder Holder for two 3.5 m drain hoses Note: Please contact us for your production requests in special sizes.

Marka: Mas Trailer Tanker Model: 2024 CARBON STEEL ADR PREMIUM MODEL Tip: poluprikolica autocisterna Zapremina: 30000 l Kapacitet podizanja: 25500 kg Neto težina: 7500 kg Ukupna težina: 33000 kg Lokacija: Turska KARATAY / KONYA Datum objavljivanja: juče Autoline ID: UY35992 ADR PREMIUM MODEL TANKER DIMENSIONS: Length: 10850 mm Width: 2550 mm maximum Height 3750 mm Pin - Ground clearance: 1250 mm CHASSIS AND STRUCTURE: Chassis: Carbon steel 100x200x5mm box section Tanker Structure Monoblock 1 & 5 Compartments Tank capacity between 30.000 lt & 40.000 lt 4.2mm steel Tanker with ADR Axles 3 local axles are used, each with a carrying capacity of 12 tons. It has air suspension. The front axle is lifted and can be controlled from the driver's cab. BRAKE SYSTEM: Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed. ELECTRICAL SYSTEM Saba brand 2x7 pin sockets - 24V, lights according to SAE standards. Rear tail lights, side marker lights, brake safety warning lights and signal lights are installed. 2 tail and stop combination lights. 2 turn signal combination lamps are installed. 1 license plate light. The electrical system complies with European standards and is flame retardant. PARK FEET OMS brand Park Feet Including telescopic mechanical conveyor Dynamic lifting capacity : 25 tons Static lifting capacity : 50 tons Low gear position : 0.98 mm / RPM TIRES AND RIMS: 385/65/R22.5 STARMAX PETLAS, ( 6 pcs ) 11.75 x 22.5, JANTSA rim (6 pcs) KING-PIN: Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate. PAINTING: All parts are carefully cleaned before painting. First protective primer and epoxy is used for painting. Two coats of high quality paint are applied to the tanker. The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be reflected as an extra cost. KURTUBA manhole cover: It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. It has standard ports for mounting the vapor recycling valve, level sensor, measuring rod, and vent. The center opening manual lid is 250 mm in diameter. KURTUBA Pneumatic Control Unit It is installed in the cabinet of the tank truck. The air system, which is drawn from the vehicle's air cylinders, is connected to the inlet of the control unit. It has separate buttons for each eye and a clock indicating the air pressure and allows the system to operate during filling and emptying of the tank. KURTUBA submersible valve: 3" standard bottom valve is connected to the bottom of the tanker separately for each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank with the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed. KURTUBA API valve: It is mounted inside the tanker cabinet, each compartment separately. It is used for emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed. ACCESSORIES 6 pieces of mudguards 1 wheel chock 1 6 kg fire extinguisher box 1 spare wheel space 1 water tank 30 lt. 1 Folding ladder Holder for two 3.5 m drain hoses Note: Please contact us for your production requests in special sizes. ADR PREMIUM MODEL TANKER DIMENSIONS: Length: 10850 mm Width: 2550 mm maximum Height 3750 mm Pin - Ground clearance: 1250 mm CHASSIS AND STRUCTURE: Chassis: Carbon steel 100x200x5mm box section Tanker Structure Monoblock 1 & 5 Compartments Tank capacity between 30.000 lt & 40.000 lt 4.2mm steel Tanker with ADR Axles 3 local axles are used, each with a carrying capacity of 12 tons. It has air suspension. The front axle is lifted and can be controlled from the driver's cab. BRAKE SYSTEM: Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed. ELECTRICAL SYSTEM Saba brand 2x7 pin sockets - 24V, lights according to SAE standards. Rear tail lights, side marker lights, brake safety warning lights and signal lights are installed. 2 tail and stop combination lights. 2 turn signal combination lamps are installed. 1 license plate light. The electrical system complies with European standards and is flame retardant. PARK FEET OMS brand Park Feet Including telescopic mechanical conveyor Dynamic lifting capacity : 25 tons Static lifting capacity : 50 tons Low gear position : 0.98 mm / RPM TIRES AND RIMS: 385/65/R22.5 STARMAX PETLAS, ( 6 pcs ) 11.75 x 22.5, JANTSA rim (6 pcs) KING-PIN: Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate. PAINTING: All parts are carefully cleaned before painting. First protective primer and epoxy is used for painting. Two coats of high quality paint are applied to the tanker. The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be reflected as an extra cost. KURTUBA manhole cover: It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. It has standard ports for mounting the vapor recycling valve, level sensor, measuring rod, and vent. The center opening manual lid is 250 mm in diameter. KURTUBA Pneumatic Control Unit It is installed in the cabinet of the tank truck. The air system, which is drawn from the vehicle's air cylinders, is connected to the inlet of the control unit. It has separate buttons for each eye and a clock indicating the air pressure and allows the system to operate during filling and emptying of the tank. KURTUBA submersible valve: 3" standard bottom valve is connected to the bottom of the tanker separately for each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank with the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed. KURTUBA API valve: It is mounted inside the tanker cabinet, each compartment separately. It is used for emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed. ACCESSORIES 6 pieces of mudguards 1 wheel chock 1 6 kg fire extinguisher box 1 spare wheel space 1 water tank 30 lt. 1 Folding ladder Holder for two 3.5 m drain hoses Note: Please contact us for your production requests in special sizes.

Marka: Mas Trailer Tanker Model: 2024 ADR ALIMINUM LUXURY MODEL Tip: poluprikolica autocisterna Zapremina: 30000 l Kapacitet podizanja: 25500 kg Neto težina: 5400 kg Ukupna težina: 30900 kg Lokacija: Turska KARATAY / KONYA Datum objavljivanja: 10. 5. 2024. Autoline ID: VE37753 LUXURY MODEL ADR ALUMINUM TANKER DIMENSIONS: Length: 10850 mm Width: 2550 mm maximum Height: 3750 mm Pin - Ground clearance: 1250 mm CHASSIS AND STRUCTURE: Chassis: Carbon steel 100x200x5mm box section Tanker Structure Monoblock 1 & 6 Compartments Tank capacity between 30,000 lt & 45,000 lt 5.28mm aluminum alloy sheet Tanker with ADR Axles 3 BPW or Saf brand axles are used, each with a load capacity of 12 tons. Air suspension. The front axle is lifted and can be controlled from the cab. BRAKE SYSTEM: Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed. ELECTRICAL SYSTEM: Aspöck lighting system and Aspöck bumper 2x7 pin sockets - 24V, lights according to SAE standards. Rear lights, side marker lights, brake safety warning lights and signal lights are installed. 2 tail and stop combination lights. 2 turn signal combination lamps are installed. 1 license plate light. The electrical system complies with European standards and is flame retardant. PARKING LEGS OMS brand parking legs Including telescopic mechanical conveyor Dynamic lifting capacity : 25 tons Static lifting capacity : 50 T TIRES AND RIMS: 385/65/R22.5 STARMAX PETLAS, (6 pieces) 11.75 x 22.5, JANTSA rim (6 pcs) KING-PIN: Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate. PAINTING: All parts are carefully cleaned before painting. First protective primer and epoxy is used for painting. Two coats of high quality paint are applied to the tanker. The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be considered as an extra cost. EMCO WHEATON or CİVACON manhole cover: It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. Standard ports are provided to mount the vapor recycling valve, level sensor, measuring rod, and vent. The center-opening manual lid has a diameter of 250 mm. EMCO WHEATON or CİVACON pneumatic control unit It is installed inside the tank truck cabinet. The air system, which is drawn from the vehicle's air cylinders, is connected to the inlet of the control unit. There are separate buttons for each eye and a clock indicating the air pressure, and it allows the system to operate during the filling and emptying of the tank. EMCO WHEATON or CIVACON submersible valve: 3" standard bottom valve is connected to the bottom of the tanker separately for each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank with the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminium (eteal 171), the gaskets, the Viton spring and the fasteners (inox) are made of chrome nickel and pressure and leak tests have been carried out. EMCO WHEATON or CİVACON-Api valve: It is mounted inside the cabinet, each compartment is separate in the tanker. It is used for filling and emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been made. ACCESSORIES 6 pieces of mudguards 1 wheel chock 1 6 kg fire extinguisher box 1 spare wheel space 1 water tank 30 lt. 1 Folding ladder Holder for two 3.5 m drain hoses Note: Please contact us for your production requests in special sizes. LUXURY MODEL ADR ALUMINUM TANKER DIMENSIONS: Length: 10850 mm Width: 2550 mm maximum Height: 3750 mm Pin - Ground clearance: 1250 mm CHASSIS AND STRUCTURE: Chassis: Carbon steel 100x200x5mm box section Tanker Structure Monoblock 1 & 6 Compartments Tank capacity between 30,000 lt & 45,000 lt 5.28mm aluminum alloy sheet Tanker with ADR Axles 3 BPW or Saf brand axles are used, each with a load capacity of 12 tons. Air suspension. The front axle is lifted and can be controlled from the cab. BRAKE SYSTEM: Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed. ELECTRICAL SYSTEM: Aspöck lighting system and Aspöck bumper 2x7 pin sockets - 24V, lights according to SAE standards. Rear lights, side marker lights, brake safety warning lights and signal lights are installed. 2 tail and stop combination lights. 2 turn signal combination lamps are installed. 1 license plate light. The electrical system complies with European standards and is flame retardant. PARKING LEGS OMS brand parking legs Including telescopic mechanical conveyor Dynamic lifting capacity : 25 tons Static lifting capacity : 50 T TIRES AND RIMS: 385/65/R22.5 STARMAX PETLAS, (6 pieces) 11.75 x 22.5, JANTSA rim (6 pcs) KING-PIN: Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate. PAINTING: All parts are carefully cleaned before painting. First protective primer and epoxy is used for painting. Two coats of high quality paint are applied to the tanker. The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be considered as an extra cost. EMCO WHEATON or CİVACON manhole cover: It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. Standard ports are provided to mount the vapor recycling valve, level sensor, measuring rod, and vent. The center-opening manual lid has a diameter of 250 mm. EMCO WHEATON or CİVACON pneumatic control unit It is installed inside the tank truck cabinet. The air system, which is drawn from the vehicle's air cylinders, is connected to the inlet of the control unit. There are separate buttons for each eye and a clock indicating the air pressure, and it allows the system to operate during the filling and emptying of the tank. EMCO WHEATON or CIVACON submersible valve: 3" standard bottom valve is connected to the bottom of the tanker separately for each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank with the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminium (eteal 171), the gaskets, the Viton spring and the fasteners (inox) are made of chrome nickel and pressure and leak tests have been carried out. EMCO WHEATON or CİVACON-Api valve: It is mounted inside the cabinet, each compartment is separate in the tanker. It is used for filling and emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been made. ACCESSORIES 6 pieces of mudguards 1 wheel chock 1 6 kg fire extinguisher box 1 spare wheel space 1 water tank 30 lt. 1 Folding ladder Holder for two 3.5 m drain hoses Note: Please contact us for your production requests in special sizes.

Marka: Mas Trailer Tanker Model: 2024 CARBON STEEL ADR PREMIUM MODEL Tip: poluprikolica autocisterna Zapremina: 30000 l Kapacitet podizanja: 25500 kg Neto težina: 7500 kg Ukupna težina: 33000 kg Lokacija: Turska KARATAY / KONYA Datum objavljivanja: 10. 5. 2024. Autoline ID: WG37753 ADR PREMIUM MODEL TANKER DIMENSIONS: Length: 10850 mm Width: 2550 mm maximum Height 3750 mm Pin - Ground clearance: 1250 mm CHASSIS AND STRUCTURE: Chassis: Carbon steel 100x200x5mm box section Tanker Structure Monoblock 1 & 5 Compartments Tank capacity between 30.000 lt & 40.000 lt 4.2mm steel Tanker with ADR Axles 3 local axles are used, each with a carrying capacity of 12 tons. It has air suspension. The front axle is lifted and can be controlled from the driver's cab. BRAKE SYSTEM: Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed. ELECTRICAL SYSTEM Saba brand 2x7 pin sockets - 24V, lights according to SAE standards. Rear tail lights, side marker lights, brake safety warning lights and signal lights are installed. 2 tail and stop combination lights. 2 turn signal combination lamps are installed. 1 license plate light. The electrical system complies with European standards and is flame retardant. PARK FEET OMS brand Park Feet Including telescopic mechanical conveyor Dynamic lifting capacity : 25 tons Static lifting capacity : 50 tons Low gear position : 0.98 mm / RPM TIRES AND RIMS: 385/65/R22.5 STARMAX PETLAS, ( 6 pcs ) 11.75 x 22.5, JANTSA rim (6 pcs) KING-PIN: Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate. PAINTING: All parts are carefully cleaned before painting. First protective primer and epoxy is used for painting. Two coats of high quality paint are applied to the tanker. The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be reflected as an extra cost. KURTUBA manhole cover: It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. It has standard ports for mounting the vapor recycling valve, level sensor, measuring rod, and vent. The center opening manual lid is 250 mm in diameter. KURTUBA Pneumatic Control Unit It is installed in the cabinet of the tank truck. The air system, which is drawn from the vehicle's air cylinders, is connected to the inlet of the control unit. It has separate buttons for each eye and a clock indicating the air pressure and allows the system to operate during filling and emptying of the tank. KURTUBA submersible valve: 3" standard bottom valve is connected to the bottom of the tanker separately for each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank with the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed. KURTUBA API valve: It is mounted inside the tanker cabinet, each compartment separately. It is used for emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed. ACCESSORIES 6 pieces of mudguards 1 wheel chock 1 6 kg fire extinguisher box 1 spare wheel space 1 water tank 30 lt. 1 Folding ladder Holder for two 3.5 m drain hoses Note: Please contact us for your production requests in special sizes. ADR PREMIUM MODEL TANKER DIMENSIONS: Length: 10850 mm Width: 2550 mm maximum Height 3750 mm Pin - Ground clearance: 1250 mm CHASSIS AND STRUCTURE: Chassis: Carbon steel 100x200x5mm box section Tanker Structure Monoblock 1 & 5 Compartments Tank capacity between 30.000 lt & 40.000 lt 4.2mm steel Tanker with ADR Axles 3 local axles are used, each with a carrying capacity of 12 tons. It has air suspension. The front axle is lifted and can be controlled from the driver's cab. BRAKE SYSTEM: Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed. ELECTRICAL SYSTEM Saba brand 2x7 pin sockets - 24V, lights according to SAE standards. Rear tail lights, side marker lights, brake safety warning lights and signal lights are installed. 2 tail and stop combination lights. 2 turn signal combination lamps are installed. 1 license plate light. The electrical system complies with European standards and is flame retardant. PARK FEET OMS brand Park Feet Including telescopic mechanical conveyor Dynamic lifting capacity : 25 tons Static lifting capacity : 50 tons Low gear position : 0.98 mm / RPM TIRES AND RIMS: 385/65/R22.5 STARMAX PETLAS, ( 6 pcs ) 11.75 x 22.5, JANTSA rim (6 pcs) KING-PIN: Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate. PAINTING: All parts are carefully cleaned before painting. First protective primer and epoxy is used for painting. Two coats of high quality paint are applied to the tanker. The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be reflected as an extra cost. KURTUBA manhole cover: It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. It has standard ports for mounting the vapor recycling valve, level sensor, measuring rod, and vent. The center opening manual lid is 250 mm in diameter. KURTUBA Pneumatic Control Unit It is installed in the cabinet of the tank truck. The air system, which is drawn from the vehicle's air cylinders, is connected to the inlet of the control unit. It has separate buttons for each eye and a clock indicating the air pressure and allows the system to operate during filling and emptying of the tank. KURTUBA submersible valve: 3" standard bottom valve is connected to the bottom of the tanker separately for each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank with the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed. KURTUBA API valve: It is mounted inside the tanker cabinet, each compartment separately. It is used for emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed. ACCESSORIES 6 pieces of mudguards 1 wheel chock 1 6 kg fire extinguisher box 1 spare wheel space 1 water tank 30 lt. 1 Folding ladder Holder for two 3.5 m drain hoses Note: Please contact us for your production requests in special sizes.

Marka: Mas Trailer Tanker Model: 2024 CARBON STEEL ADR LUXURY MODEL Tip: poluprikolica autocisterna Zapremina: 30000 l Kapacitet podizanja: 25500 kg Neto težina: 7500 kg Ukupna težina: 33000 kg Lokacija: Turska KARATAY / KONYA Datum objavljivanja: 9. 5. 2024. Autoline ID: WA37753 ADR LUXURY MODEL TANKER DIMENSIONS: Length: 10850 mm Width: 2550 mm maximum Height 3750 mm Pin - Ground clearance: 1250 mm CHASSIS AND STRUCTURE: Chassis: Carbon steel 100x200x5mm box section Tanker Structure Monoblock 1 & 6 Compartments Tank capacity between 30.000 lt & 45.000 lt 4.2mm steel Tanker with ADR Axles 3 Saf brand axles are used, each with a capacity of 12 tons. Air suspension. The front axle is lifted and can be controlled from the driver's cab. BRAKE SYSTEM: Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed. ELECTRICAL SYSTEM: Aspöck Lighting Systems and Aspöck Bumper 2x7 pin sockets - 24V, lights according to SAE standards. Rear lights, side marker lights, brake warning lights and signal lights will be installed. There will be 2 tail and stop combination lights. 2 indicators will be installed. 1 license plate light. The electrical system complies with European standards and is flame retardant. PARKING LEGS OMS brand parking legs Including telescopic mechanical conveyor Dynamic lifting capacity : 25 tons Static lifting capacity : 50 tons Low gear position : 0.98 mm / RPM TIRES AND RIMS: 385/65/R22.5 STARMAX PETLAS, ( 6 pcs ) 11.75 x 22.5, JANTSA rim (6 pcs) KING-PIN: Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate. PAINTING: All parts are carefully cleaned before painting. First protective primer and epoxy is used for painting. Two coats of high quality paint are applied to the tanker. The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be considered as an extra cost. EMCO WHEATON or CİVACON manhole cover: It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The top plate is connected to the neck plate with sealed gaskets and screws. It is provided with standard connection points for mounting the vapor recycling valve, level sensor, measuring rod and vent. EMCO WHEATON or CIVACON pneumatic control unit It is installed inside the tank truck cabinet. The air system, which is drawn from the vehicle's air cylinders, is connected to the inlet of the control unit. It has separate buttons for each eye and a clock indicating the air pressure, it allows the system to operate during filling and emptying of the tank. EMCO WHEATON or CİVACON submersible valve: 3" standard type bottom valve is connected to the bottom of the tanker separately for each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank with the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminium (eteal 171), the gaskets, the Viton spring and the fasteners (inox) are made of chrome nickel and pressure and leak tests have been carried out. EMCO WHEATON or CİVACON-Api valve: It is mounted inside the cabinet, each compartment is separate in the tanker. It is used for filling and emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been made. ACCESSORIES 6 pieces of mudguards 1 wheel chock 1 6 kg fire extinguisher box 1 spare wheel space 1 water tank 30 lt. 1 Folding ladder Holder for two 3.5 m drain hoses Note: Please contact us for your production requests in special sizes. ADR LUXURY MODEL TANKER DIMENSIONS: Length: 10850 mm Width: 2550 mm maximum Height 3750 mm Pin - Ground clearance: 1250 mm CHASSIS AND STRUCTURE: Chassis: Carbon steel 100x200x5mm box section Tanker Structure Monoblock 1 & 6 Compartments Tank capacity between 30.000 lt & 45.000 lt 4.2mm steel Tanker with ADR Axles 3 Saf brand axles are used, each with a capacity of 12 tons. Air suspension. The front axle is lifted and can be controlled from the driver's cab. BRAKE SYSTEM: Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed. ELECTRICAL SYSTEM: Aspöck Lighting Systems and Aspöck Bumper 2x7 pin sockets - 24V, lights according to SAE standards. Rear lights, side marker lights, brake warning lights and signal lights will be installed. There will be 2 tail and stop combination lights. 2 indicators will be installed. 1 license plate light. The electrical system complies with European standards and is flame retardant. PARKING LEGS OMS brand parking legs Including telescopic mechanical conveyor Dynamic lifting capacity : 25 tons Static lifting capacity : 50 tons Low gear position : 0.98 mm / RPM TIRES AND RIMS: 385/65/R22.5 STARMAX PETLAS, ( 6 pcs ) 11.75 x 22.5, JANTSA rim (6 pcs) KING-PIN: Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate. PAINTING: All parts are carefully cleaned before painting. First protective primer and epoxy is used for painting. Two coats of high quality paint are applied to the tanker. The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be considered as an extra cost. EMCO WHEATON or CİVACON manhole cover: It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The top plate is connected to the neck plate with sealed gaskets and screws. It is provided with standard connection points for mounting the vapor recycling valve, level sensor, measuring rod and vent. EMCO WHEATON or CIVACON pneumatic control unit It is installed inside the tank truck cabinet. The air system, which is drawn from the vehicle's air cylinders, is connected to the inlet of the control unit. It has separate buttons for each eye and a clock indicating the air pressure, it allows the system to operate during filling and emptying of the tank. EMCO WHEATON or CİVACON submersible valve: 3" standard type bottom valve is connected to the bottom of the tanker separately for each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank with the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminium (eteal 171), the gaskets, the Viton spring and the fasteners (inox) are made of chrome nickel and pressure and leak tests have been carried out. EMCO WHEATON or CİVACON-Api valve: It is mounted inside the cabinet, each compartment is separate in the tanker. It is used for filling and emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been made. ACCESSORIES 6 pieces of mudguards 1 wheel chock 1 6 kg fire extinguisher box 1 spare wheel space 1 water tank 30 lt. 1 Folding ladder Holder for two 3.5 m drain hoses Note: Please contact us for your production requests in special sizes.

Marka: Mas Trailer Tanker Model: 2024 ALIMINIUM MEDUIM MODEL Tip: poluprikolica autocisterna Zapremina: 30000 l Kapacitet podizanja: 25500 kg Neto težina: 5500 kg Ukupna težina: 31000 kg Lokacija: Turska KARATAY / KONYA Datum objavljivanja: 9. 5. 2024. Autoline ID: ZX37752 MEDIUM MODEL ALUMINIUM TANKER DIMENSIONS: Length: 10850 mm Width: 2550 mm maximum Height 3750 mm Pin - Ground clearance: 1250 mm CHASSIS AND STRUCTURE: Chassis: Carbon steel 100x200x5mm box section Tanker Structure Monoblock 1 & 5 Compartments Tank capacity between 30.000 lt & 40.000 lt 5.28mm aluminum alloy sheet Axles 3 local axles are used, each with a capacity of 12 tons. Air suspension. The front axle is lifted and can be controlled from the cab. BRAKE SYSTEM: Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed. ELECTRICAL SYSTEM: Saba brand 2x7 pin sockets - 24V, lights according to SAE standards. Rear tail lights, side marker lights, brake safety warning lights and signal lights will be installed. There will be 2 tail and stop combination lights. 2 indicators will be installed. 1 license plate light. The electrical system complies with European standards and is flame retardant. PARKING LEGS OMS brand parking legs Including telescopic mechanical conveyor Dynamic lifting capacity : 25 tons Static lifting capacity : 50 tons Low gear position : 0.98 mm / RPM TIRES AND RIMS: 385/65/R22.5 STARMAX PETLAS, (6 pieces) 11.75 x 22.5, JANTSA rim (6 pcs) KING-PIN: Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate. PAINTING: All parts are carefully cleaned before painting. First protective primer and epoxy is used for painting. Two coats of high quality paint are applied to the tanker. The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be reflected as an extra cost. KURTUBA manhole cover: It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. Standard ports are provided to mount the vapor recycling valve, level sensor, measuring rod, and vent. The diameter of the center opening manual cover is 250 mm. KURTUBA pneumatic control unit It is installed inside the tank truck cabinet. The air system drawn from the vehicle's air cylinders is connected to the inlet of the control unit. It has separate buttons for each eye and a clock indicating the air pressure, it allows to control the system during filling and emptying of the tank. KURTUBA Bottom Valve 3" Norm type bottom valve is connected to the bottom of the tanker separately to each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank on the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed. KURTUBA API valve: It is mounted inside the cabinet of the tanker, each compartment separately. It is used for emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed. ACCESSORIES 6 pieces of mudguards 1 wheel chock 1 6 kg fire extinguisher box 1 spare wheel space 1 water tank 30 lt. 1 folding ladder Holder for two 3.5 m drain hoses Note: Please contact us for your production requests in special sizes. MEDIUM MODEL ALUMINIUM TANKER DIMENSIONS: Length: 10850 mm Width: 2550 mm maximum Height 3750 mm Pin - Ground clearance: 1250 mm CHASSIS AND STRUCTURE: Chassis: Carbon steel 100x200x5mm box section Tanker Structure Monoblock 1 & 5 Compartments Tank capacity between 30.000 lt & 40.000 lt 5.28mm aluminum alloy sheet Axles 3 local axles are used, each with a capacity of 12 tons. Air suspension. The front axle is lifted and can be controlled from the cab. BRAKE SYSTEM: Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed. ELECTRICAL SYSTEM: Saba brand 2x7 pin sockets - 24V, lights according to SAE standards. Rear tail lights, side marker lights, brake safety warning lights and signal lights will be installed. There will be 2 tail and stop combination lights. 2 indicators will be installed. 1 license plate light. The electrical system complies with European standards and is flame retardant. PARKING LEGS OMS brand parking legs Including telescopic mechanical conveyor Dynamic lifting capacity : 25 tons Static lifting capacity : 50 tons Low gear position : 0.98 mm / RPM TIRES AND RIMS: 385/65/R22.5 STARMAX PETLAS, (6 pieces) 11.75 x 22.5, JANTSA rim (6 pcs) KING-PIN: Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate. PAINTING: All parts are carefully cleaned before painting. First protective primer and epoxy is used for painting. Two coats of high quality paint are applied to the tanker. The tanker is painted white. It can be painted in any desired color. If a different color is requested, it will be reflected as an extra cost. KURTUBA manhole cover: It is mounted on the tanker by welding the lower neck plate to the upper part of the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. Standard ports are provided to mount the vapor recycling valve, level sensor, measuring rod, and vent. The diameter of the center opening manual cover is 250 mm. KURTUBA pneumatic control unit It is installed inside the tank truck cabinet. The air system drawn from the vehicle's air cylinders is connected to the inlet of the control unit. It has separate buttons for each eye and a clock indicating the air pressure, it allows to control the system during filling and emptying of the tank. KURTUBA Bottom Valve 3" Norm type bottom valve is connected to the bottom of the tanker separately to each compartment. The drawn installation is brought into the cabinet and the valve is connected to the end. It is used for filling and emptying the tank on the command received from the control unit. In case of an accident, it acts as a safety valve to prevent the product in the tank from emptying if the valves in the cabinet break. The system is completely made of aluminum (eteal 171), gaskets, Viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed. KURTUBA API valve: It is mounted inside the cabinet of the tanker, each compartment separately. It is used for emptying the tank. The system is completely made of aluminum (eteal 171), gaskets, viton spring and fasteners (inox) are made of chromnickel and pressure and tightness tests have been performed. ACCESSORIES 6 pieces of mudguards 1 wheel chock 1 6 kg fire extinguisher box 1 spare wheel space 1 water tank 30 lt. 1 folding ladder Holder for two 3.5 m drain hoses Note: Please contact us for your production requests in special sizes.