Marketing
Postavite oglas
Kontakt
Pratite promene cene putem maila
- Da bi dobijali obaveštenja o promeni cene potrebno je da kliknete Prati oglas dugme koje se nalazi na dnu svakog oglasa i unesete Vašu mail adresu.
126-150 od 1097 rezultata
Prati pretragu "EKSTRUDER,"
Vi se opustite, Gogi će Vas obavestiti kad pronađe nove oglase za tražene ključne reči.
Gogi će vas obavestiti kada pronađe nove oglase.
Režim promene aktivan!
Upravo ste u režimu promene sačuvane pretrage za frazu .
Možete da promenite frazu ili filtere i sačuvate trenutno stanje
Aktivni filteri
-
Izbačen Sajt
www.kupindo.com
Bunker / Feeder for extruder BP-50 Specification Product dimensions Length 700,0 (mm) Width 500,0 (mm) Height 500,0 (mm) Features Product Weight 17 (kg) Efficiency up to 60 (kg/h) Energy consumption 0,1 (kW) Tension 220 (V) Tank volume 50 (L) Additional information Guarantee 12 month Poruka Poruka
Grinder for plastics GRINDEX - 11 The GRINDEX series of plastic shredders are versatile, high-performance medium-sized shredders. Ideal for medium to large scale production, GRINDEX shreds a wide range of plastics, rubber and other solid waste (wood, paper, fiberglass, etc.) as well as difficult to grind waste (medium-sized castings, pipes, thick-walled sheet materials, cans, drums, bottles and films). Intended for. The size of the initial fraction is determined by the size of the sieve mesh. Depending on the customer's requirements, a sieve mesh with the required cell size can be installed. Thanks to the efficient processing process, it is possible to obtain a well-flowing, dense bulk product with minimal energy consumption and high productivity. Specification Product dimensions Length 1515,0 (mm) Width 1150,0 (mm) Height 1585,0 (mm) Features Product Weight 850 (kg) Usage For plastics of high and medium hardness Efficiency 250 (kg / h) Energy consumption 11 (kW) Tension 380 (V) Drive type Belt (3 pcs) The diameter of the nozzle for the intake of raw materials 400*220 (мм) Outgoing faction up to 10 (mm) Additional information Guarantee 12 month Number of knives 17 (pcs) Video review Poruka Poruka
Pet food extruder MK-50 Equipment for the production of food for dogs, cats, fish, goats and other animals, including cattle. The principle of feed production is the extrusion method. This method has been improved by installing an electric heater that heats the working section to the required temperature and maintains it during operation. This addition makes the operation of the feed extruder more even and efficient in comparison to other extruder designs, in which the heating of the working section is caused by the friction of the material (or the screw itself) against the walls of the working section of the screw. As a result, temperature control is possible, ensuring consistent yield and end product quality. In addition, the raw material is subjected to heat treatment at high temperatures, which ensures product sterilization. The feed extruder is equipped with several types of fillers (pillow, heart and ball) that allow the feed to be shaped in different ways. The use of knives also makes it possible to control the size of the final product, from 1 to 20 mm. The device has an automatic adjustment of the feed speed, which can be changed depending on the situation. Specification Product dimensions Length 870,0 (mm) Width 1520,0 (mm) Height 1230,0 (mm) Features Product Weight 263 (kg) Usage For the production of food Efficiency 60 (kg/h) Energy consumption 7.5 (kW) Tension 380 (V) Drive type Electric Additional information Guarantee 12 month Video review Poruka Poruka
Feed extruder (soy) EGK-200 , 18.5 kW | 200 kg/h Household grain extruder with a capacity of 18.5 kW, intended for the preparation of fodder for pets, poultry and fish with a productivity of up to 200 kg per hour. A homogeneous stick is obtained at the output. For the convenience of further use, you can use a special shredder. Operates from 380 V mains. Great for small home and farm use. Advantages of extruded feed: 1. The fodder extruder in the pressing chamber grinds the fodder, and under the influence of a pressure of 40-60 atmospheres, it is heated to a temperature of 180C. When leaving the die, due to the difference in pressure, water hammer occurs in the grains, as a result of which the grains foam, increasing in volume more than 5 times. As a result, 5 times more fodder for the farm is obtained; 2. Due to ultra-fast heat treatment, starch, which is poorly absorbed by animals, is broken down into simple carbohydrates and sugar, while most of the vitamins and proteins do not have time to break down, and the high temperature makes it possible to get rid of pathogenic microflora and fungus, which are present even in dried grain; 3. The feed is disinfected in the extruder, which is especially useful when growing young animals that are sensitive to various types of bacteria and other harmful microorganisms; 4. The possibility of using spoiled grain, underripe and almost any quality; 5. The feed after the extruder has the shape of a stick, is pleasant to the taste and is eaten by animals with pleasure, leaving no waste. Specification Product dimensions Length 1100,0 (mm) Width 1100,0 (mm) Height 1000,0 (mm) Features Product Weight 250 (kg) Producer LabEcoTech Usage Grain,soy Efficiency up to 200 (kg/h) Energy consumption 18,5 (kW) Tension 380 (V) Tank volume 50 (L) Additional information Guarantee 12 month Video review Poruka Poruka
Feed extruder EGK-30, 4 kW (220/380V) 30 kg/h Feed screw extruder EGK-30 is designed for sintering feed from grain crops. The model has a productivity of up to 30 kg/h. 2 types of 220/380V connection are possible. You can also purchase equipment without an engine or only the working part (working module). At the request of the customer, the extruder can be additionally equipped with a BP-50 resin hopper. The EGK-30 grain extruder efficiently processes grain: corn, oats, wheat, rye, legumes, soy, and up to 20% bran can also be added. It is important that the grain or mixture does not need to be steamed before processing. The main advantage of this extruder is that it can be used in the conditions of a small household, where there is no industrial voltage of 380 V. Specification Product dimensions Length 750,0 (mm) Width 800,0 (mm) Height 500,0 (mm) Features Product Weight 55 (kg) Producer LabEcoTech Efficiency up to 30 (kg/h) Energy consumption 4 (kW) Tension 220/380 (V) Tank volume 6 (L) Additional information Guarantee 12 month Video review Poruka Poruka
Feed extruder EGK-50 , 5.5 kW | 50 kg/h Feed screw extruder EGK-50 is designed for sintering feed from grain crops. The model has a capacity of up to 50 kg/h. It is also possible to purchase equipment without an engine or only a working part (working module). At the request of the customer, the extruder can be additionally equipped with a BP-50 bunker. Grain extruder EGK-50 effectively processes grain: corn, oats, wheat, rye, legumes, soybeans, it can also be added to 20% bran. It is important that grains or mixtures do not need to be steamed before processing. The main advantage of the extruder is that it can be used in a small household. Specification Product dimensions Length 650,0 (mm) Width 450,0 (mm) Height 400,0 (mm) Features Product Weight 65 (kg) Producer LabEcoTech Efficiency up to 50 (kg/h) Energy consumption 5,5 (kW) Tension 380 (V) Tank volume 6 (L) Additional information Guarantee 12 month Video review Poruka Poruka
Feed extruder (soy) EGK-150 , 15 kW | 150 kg/h Household grain extruder with a capacity of 15 kW, intended for the preparation of fodder for pets, poultry and fish with a productivity of up to 150 kg per hour. A homogeneous stick is obtained at the output. For the convenience of further use, you can use a special shredder. Operates from 380 V mains. Great for small home and farm use. Advantages of extruded feed: 1. The fodder extruder in the pressing chamber grinds the fodder, and under the influence of a pressure of 40-60 atmospheres, it is heated to a temperature of 180C. When leaving the die, due to the difference in pressure, water hammer occurs in the grains, as a result of which the grains foam, increasing in volume more than 5 times. As a result, 5 times more fodder for the farm is obtained; 2. Due to ultra-fast heat treatment, starch, which is poorly absorbed by animals, is broken down into simple carbohydrates and sugar, while most of the vitamins and proteins do not have time to break down, and the high temperature makes it possible to get rid of pathogenic microflora and fungus, which are present even in dried grain; 3. The feed is disinfected in the extruder, which is especially useful when growing young animals that are sensitive to various types of bacteria and other harmful microorganisms; 4. The possibility of using spoiled grain, underripe and almost any quality; 5. The feed after the extruder has the shape of a stick, is pleasant to the taste and is eaten by animals with pleasure, leaving no waste. Specification Product dimensions Length 1100,0 (mm) Width 1100,0 (mm) Height 1000,0 (mm) Features Product Weight 220 (kg) Producer LabEcoTech Usage Grain,soy Efficiency up to 150 (kg/h) Energy consumption 15 (kW) Tension 380 (V) Tank volume 20 (L) Additional information Guarantee 12 month Video review Poruka Poruka
MEGA PLAST MPT d.o.o. Mega plast MPT d.o.o. (www.mega-plast.rs) Mitropolita Stratimirovića 152, Sremski Karlovci – Kompanija specijalizovana za proizvodnju i preradu duvane polietilenske folije i kesa. Proizvodni program obuhvata butik kese, kese tregerice, džakove, džakove sa uvučenom trakom za vezivanje, kese za zamrzivač, itd. Potrebna 2 izvršioca M/Ž: Operater za rad na mašinama za proizvodnju folije- ekstruder Zadaci radnog mesta: Rad na mašinama za proizvodnju folije Nadzor kvaliteta u toku rada mašine Održavanje mašine i radnog prostora oko mašine Opšti uslovi: Iskustvo nije neophodno Tehničko obrazovanje poželjno ali nije neophodno. Obezbedjena je obuka za rad na mašinama Rad u tri smene Mesto rada: Sremski Karlovci Nudimo: Obuku na najmodernijim mašinama, mogućnost napredovanja, stalan posao Redovnu zaradu, od 60.000 – 80.000,00 Plaćeni putni troškovi Rok za konkurisanje: do popune radnog mesta Doći lično ili pozvati na telefon: 021 2983 369 od 07-15 h Ili e-mailom na: [email protected]
Ldpe i Hdpe film, može i coex 1-3 slojevi kombinacija Abc ili Aba šneka56 mm glava se vrti vinder 2 po 1000mm ABB motor 18.5 kw glava ekstrudora 120 mm dva vindera za folijo 1m banana na vinderu guma na vinderima stransko rezanje rukav, pola-rukav, folija cilinder i šneka visoko odporna na abrazijo kontrola debeline Omron plc komponente sve EU i urađen kompletno u EU!!! Abb motori Omron pogoni Omron thermoregulatori 2.1 kVA ionizer corona jednostrano ili dvostrano 7″ touch panel Weintek mehanička ili electronička regulacija napetost folije Odmah za isporuko. Element explanation purpose of extruder Ldpe/Lldpe Tubular film width 400-800 mm without foldings 400-900 with foldings Thickness of film LDPE 17-130 microns Output in real 45-70 kg/h depends Extruder type Low boy gearbox 2 steps with thrust bearing Screw 56 mm L/d 29 Barier With Mixing Ender Heating power 9 kw - 3 zones Main gearmotor 18 kw Abb/Rossi Filter type Candle type with big screen area heating 1 zone Heating power 2,5 kw Die head Full rotary 360 st type Spiral mandrel , hard chrome plating Die sizes 1 pcs included 180 mm Heating power 7 kw Heating zones 2 pcs body + mouth Air ring Cast aluminium , dual lip , rotary Air ring size OD 900 mm Air fan for air ring High pressure , 4 kw with inverter Take up Roll width 1000 mm Roll operating Pneumatic Take up motor AC ABB/motive 0,75 kw frequency controll Speed 1-40 m/min Winder type D
Jemstvo - Prodavac / Poverilac Erste Bank Kontakt telefon 060/874-77-39 Broj prodaje - Grad, država - Pravni osnov Na osnovu zaključka IIV 270/23 dana 12.03.2024. Dokumenti Zaključak o prodaji Opis - Štampač jednobojni, procenjene vrednosti 2.109.385,80 dinara; - Štampač dvobojni, procenjene vrednosti 2.812.514,40 dinara; - Ekstruder veliki, procenjene vrednosti 17.578.215,00 dinara; - Štampač dvobojni, procenjene vrednosti 4.687.524,00 dinara; - Ekstruder F60, procenjene vrednosti 3.515.643,00 dinara; - Ekstruder, procenjene vrednosti 3.515.643,00 dinara; - Ekstruder, procenjene vrednosti 3.515.643,00 dinara; - Ekstruder, procenjene vrednosti 3.515.643,00 dinara; - Mašina za sečenje kesa, procenjene vrednosti25.000 evra; - Mašina za sečenje kesa, procenjene vrednosti 2.929.702,50 dinara; - Mašina za sečenje iglerica, procenjene vrednosti 2.929.702,50 dinara; - Mala iglerica, procenjene vrednosti 937.504,80 dinara; - Mašina za reciklažu, procenjene vrednosti 2.929.702,50 dinara; - Motorni viljuškar, procenjene vrednosti 937.504,80 dinara; - Kompresor, procenjene vrednosti 703.128,60 dinara; Početna cena iznosi 50 % od procenjene vrednosti. Prodaja će se održati putem neposredne pogodbe.
Location: Barneveld Mach.No: WEF960037 724/1 Inlet diameter: 50 mm L/D: 20 Material: Stainless steel Screw diameter: 50mm Number of heating zones: 1 AC-motor: 3,0 KW, 230/400 Volt Number of temperature controllers: 1 Used on: icecream Total height: 1,6 M Floorspace: 2,6x1,2 M Extra information: screws form stainless steel General Main Features Specified Features - Double screw extruder Double screw extruder Co-rotating Steam heating Water cooling With variable speed drive Information With switchgear CE Technical specs Poruka Poruka
brand: Andouart extrusion of plastic tubes or profiles Max Ø 26 mm Screw Ø 60 14 kW Includes extrusion bench vacuumcooler drawing bench amp cutting device Will only be sold in combination with the following lines Samafor 81 mm click here Samafor 50 mm click here Yvroud 40 mm click here Andouart 26 mm click here Reifenhauser 30 mm click here Poruka Poruka
Istorija cene
Naziv oglasa
Početna cena
Najveća cena
Najniža cena
Nema podataka o istoriji cene
Pretraga: " "
Uspešno ste zapratili pretragu.
Sve zapraćene pretrage možete videti u
korisničkom panelu.