Fleksibilna spojnica za step motore CNC mašina i slične projekte. Dimenzije: - d1 = 5 mm - d2 = 10 mm - D = 19 mm - L = 25 mm Karakteristike: - Materijal: Aluminijum - Fiksiranje: 4 imbus zavrtnja M4 - Obrtni moment: 1.7 Nm - Maksimalni obrtni moment: 3.4 Nm - Maksimalna brzina: 8000 obrtaja/minutu

Fleksibilna spojnica za step motore CNC mašina i slične projekte. Dimenzije: - d1 = 8 mm - d2 = 12 mm - D = 25 mm - L = 30 mm Karakteristike: - Materijal: Aluminijum - Fiksiranje: 4 imbus zavrtnja M3 - Obrtni moment: 2 Nm - Maksimalni obrtni moment: 4 Nm - Maksimalna brzina: 8000 obrtaja/minutu

Fleksibilna spojnica za step motore CNC mašina i slične projekte. Dimenzije: - d1 = 10 mm - d2 = 10 mm - D = 20 mm - L = 25 mm Karakteristike: - Materijal: Aluminijum - Fiksiranje: 4 imbus zavrtnja M3 - Obrtni moment: 1.7 Nm - Maksimalni obrtni moment: 3.4 Nm - Maksimalna brzina: 8000 obrtaja/minutu

ŠIFRA: 352 - Ultrazvučni senzor rastojanja, kompatibilan sa `Arduino` platformom, - Podesan za priključenje na sisteme sa mikrokontrolerima preko TTL logičkih interfejsa, - Napon napajanje: 5VDC, - Struja (stanje mirovanja): < 2mA, - Izlazni signal: 5V (visok nivo) i 0V (nizak nivo), - Ugao reagovanja: < 15 stepeni, - Rastojanje: 2-450 cm, - Rezolucija: 0.3cm, - Dimenzije modula: 4.5x2.0x1.3cm.

Lager 1206 Proizvodjac KYK Japan Dimenzija 30x62x16mm

Držač-šelna-obujmica za držanje cevi, kablova, antena Dimenzije za ∅ 14 27x30x12 mm Montaža: na 1 imbus vijak M6 Materijal: poliamid Težina: 7 grama Proizvođač: Eldon grupa Smederevska Palanka Pogledajte i druge proizvode koje prodajemo preko Kupinda.

Specijalna silikonska boja u spreju otporna na visoke temperature. Pogodna je za upotrebu na izduvnim sistemima, hladnjacima i ventilima na automobilima, radijatorima, dimnjacima, grejnim telima i rernama. Ne koristiti bilo kakve osnovne i zaštitne boje pre nanošenja spreja pošto oni imaju manju otpornost na temperaturu. Boja postiže svoju konačnu čvrstoću nakog prvog zagrevanja na 150-200°C u trajanju od najmanje 2 sata. Podnosi temperature do 300°C. Boca od 400ml pokriva površinu od 1,5-2m2 u zavisnosti od boje farbe. Otporan na prašinu posle 10 minuta, na dodir posle 20 minuta a potpuno sušenje se postiže u roku od 24 časa. Boja: transparent.

ŠIFRA: 1220 - Porcelansko grlo za sijalice E27 sa navojem za nazuvicu M10x1, - Tip grla: E27, - Boja: bela, - Dimenzije: 40x46mm, - Materijal: keramika/porcelan

ŠIFRA: 1283 - Ženski konektor za DC napajanje sa žicom, - Dimenzija konektora (Unutrašnji/spoljašnji prečnik): 2.1x5.5mm, - Materijal: metal/plastika, - Koristi se za povezivanje napajanja (Ispravljača) za LED trake, kamere za video nadzor itd.

Vijci bez glave - RAVNI - DIN 913 - CRVIĆI - Crni u kvalitetu 8.8

Semerinzi tipa AS – od NBR gume, kompletno standardno izvođenje sa prašinarom dimenzije 35x80x10 mm. Proizvođač - Inis, Niš

Semerinzi tipa BOF Dimenzije 10x15x3 mm BOF Izradjen od NBR smese na bazi Perbunan kaučuka Sa metalnom spoljnom površinom bez opruge

Semerinzi tipa DUOT dimenzije 25x42x7 mm DUOT – od NBR gume, kompletno standardno izvođenje sa dve zaptivne površine i dve opruge i talasima spolja Proizvođač - Inis, Niš

Podloške bakarne Dimenzija 22x27x1,5

Kardanski zglob PHE WMA25 SKF sa obrtnim momentom od 9000 N/m dužine 74mm i prečnika fi 25mm

cena po kom testirani

Sasija za pametan auto, robota, auto koji prati liniju... Polje upotrebe zavisi od vase maste. :) Idealan za eksperimente sa mikrokontrolerima, arduino ili nekim drugim razvojnim sistemima. U kompletu dolaze dva motora sa prenosom, tockovima i taho davacima koji se montiraju na sasiju od pleksiglasa sto se lepo vidi na slikama. Sasija je prilicno velika (20cm duzine i 15cm siroka sa tockovima) tako da daje lepe mogucnosti za montiranje dodatne elektronike i kucista za 4AA baterije koje dolazi u kompletu. Dobija se komplet sa slike u nemontiranom stanju tako da zadovoljstvo sklapanja ostaje na kupcu. :) Napomena: Pleksiglas mi je stigao mestimicno izgreban, ne umanjuje mu se upotrebna vrednost ali da napomenem. : )

TRAPEZNE MATICE za navojna vretena - TR 20x04 Maksimalna duzina vretena je 3000mm Sečemo na meru (plaćate samo željenu dužinu) U cenu je uračunat PDV.

Trofazne uticnice sa keramičkim doznama, 2 komada. Nove i nekorišcene. Vidi slike

Dvoredni samopodesivi buričasti ležaj 21311 Dimenzija 55x120x29mm

Arduino UNO kompatibilni modul u verziji sa CH340 kolom umesto ATmega16U2. Kabl ne ide uz uredjaj. Features: Main Changes from the older version: Add two rows of the holes for the pins. So it can be connected with normal Dubond line. Add 3 rows of the holes for wiring. Change the in-line package of ATMEGA328P to flat package. CH340G Replace ATmega16U2 Plug UNO development board, the driver will be automatically installed. select the board UNO inside the die. Select the COM port, this can be in my computer queries, just inside your uno port development board You`d better to choose arduino own routine procedures, burn into the board

К05 Product name: Single Led Light Bead Shapes: round Power: 1W Forward Voltage: 3.2-3.4V Forward Current: 300mA Luminous Flux: 100-110LM color-rendering index: 60-80 Beam Angle: 120 degrees Working Temperat:-20 centigrade to 60 centigrade Wire`s Material:Gold Wire ColorTemperature:White:6000-6500K

K03 Ulazni napon:3,2-40V Izlazni napon:1,25-35V Struja(max):2A(10W) Efikasnost:92%(max) Radna temperatura:-45C~+85C Dimenzije:43mmx21mmx14mm

P06 Highlights Contains the voltmeter, ammeter, power meter, USB interface for charging the digital products. Note 1.When you use the product, the module inputs and outputs to be isolated from ground. 2.USB output voltage is consistent with the module, not a fixed 5V output. When charging for digital equipment, make sure USB output voltage is 5V. 3.Some customers report: ?The module can not adjust the output voltage is always equal to the input voltage.? When you encounter this problem, please counterclockwise rotation of the ?voltage potentiometer? 10 laps or more, then use the module you can adjust the output voltage. Because the factory default output voltage of about 20V. Specifications 1.Input voltage range:5-36VDC 2.Output voltage range:1.25-32VDC adjustable 3.Output current: 0-5A 4.Output power: 75W 5.High efficiency up to 96% 6.Built in thermal shutdown function 7.Built in current limit function 8.Built in output short protection function 9.Input reverse polarity protection: None (if required, high current diode in series with the input). 10.L x W x H =68.2×38.8×15mm 11.Weight: 39g Application 1.Use as a step-down modules with overcurrent protection Usage: (1) Adjust the right button so that ?OUT? LED lighted, Digital meter shows the value of output voltage ,adjust the ?voltage potentiometer? so that the output voltage reaches the value you want. (2) Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the ?current potentiometer? so that the output current reaches a predetermined overcurrent protection value. (For example, the Digital meter displays the current value of 4A, then you can use the module to a maximum current of 4A) (3) Connected to the load. 2.Use as a battery charger Usage (1) Make sure you need to charge the battery float voltage and charging current; (if lithium parameters 3.7V/2200mAh, then the float voltage is 4.2V, the maximum charging current 1C, ie 2200mA) (2)Under no-load conditions, adjust the ?Voltage potentiometer? so that the output voltage reaches the float voltage; (if to 3.7V rechargeable lithium battery, the output voltage can be adjusted to 4.2V) (3)Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the ?current potentiometer? so that the output current reaches a predetermined Charging current value. (4)Charge turn lamp current factory default is 0.1 times the charging current; (Battery during charging current is gradually reduced, if the charge current setting is 1A, then when the charge current is less than 0.1A, blue lights turned off, the green light is on, which means that the battery is fully charged) (5)connected to the battery charge. (1,2,3,4 steps as: Output is unloaded, do not connect the battery) 3.Use as a LED constant current driver module Usage (1)Adjust the voltage potentiometer so that the output voltage reaches the value you want. (2)Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the current potentiometer so that the output current reaches a predetermined LED operating current. (3)Connect LED, work. (1,2 steps as: Output is unloaded, do not connect LED) Voltmeter and ammeter calibration method Module with manual calibration function can correct display precision voltage and current, if you think the current voltage and current accuracy to meet the requirements, do not perform the following operations. (1) Output voltage calibration steps Step 1, adjust the right button so that ?OUT? LED lighted, Digital meter shows the value of output voltage; Press the right button for more than 2 seconds, release, Digital meter and ?OUT? LED flashes in synchronization so that you enter the output voltage calibration mode. Step 2, press the right button (normal speed), the voltage value is adding up a unit; Press the left button, minus a unit; Due to a unit is less than 0.1V, the minimum voltage display to 0.1V, so you need to continuously press 1-5 times to see the voltmeter change 0.1V, how many times voltmeter change 0.1V by pressing the key, depending on the current display voltage, the higher the voltage, the fewer the number of press. Step 3, press the right button for more than 2 seconds, release, to exit the output voltage calibration mode. All parameters set to automatically power down to save. (2) Input voltage calibration steps Step 1, adjust the right button so that ?IN? LED lighted, Digital meter shows the value of input voltage; press the right button for more than 2 seconds, release, Digital meter and ?IN? LED flashes in synchronization so that you enter the input voltage calibration mode. Steps 2 and 3, consistent with the output voltage calibration method. (3)Output current calibration steps Step 1, adjust the right button so that Digital meter shows the value of output Current. Press the right button for more than 2 seconds, release, Digital meter flashes in synchronization so that you enter the output current calibration mode. Step 2,Connected to the load, ammeter in series, adjust the right and left button to change the display of digital meter, so that is consistent with the ammeter display

Temperaturna sonda 0~800℃- K tip sa papučicom 6mm rupe Karakteristike: - Temperatura: 0~800 ℃ - Tip: K (Ni-Cr, Ni-Al - niklhrom, niklaluminijum) - Dužina: L = 5 m - Dvožična veza - Ispitni deo: F6 mm otvor / 12mm spolja prečnik