Set monolitnih kondenzatora od 180 komada 18 x 10 kom vrednosti se vide na slici Cena je za komplet.

P09 This module can be set to a transmitter or receiver, transmitter could pairing with receiver , receiver and receiver or transmitter and transmitter can`t communication between, receiver could pairing with computers and cell phone bluetooth , when buying, the default for receiver. 1. It is HC-05. 2. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards. 3. Module working voltage 3.3 V. 4. Potter default rate of 9600, the user can be set up. 5. The core module size : 28 mm x 15 mm x 2.35 mm. 6. Working current: matching for 30 MA, matching the communication for 8 MA. 7. Dormancy current: no dormancy. 8. Used for GPS navigation system, water and electricity gas meter reading system. 9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC.GND.TXD.RXD foot for the Bluetooth With `Re-seach` button(ON/OFF/WAKE foot for it , external MCU outinput `High level` can control module to re-seach) Compatible with bluetooth master module`.slave module`or master-slave(whole) module. Input voltage: 3.3~6V Size: 1.55cm*3.98cm Note: input power supply 3.3~6V, Prohibit more than 7V No `Automatically prevent power supply peversing func`, so please correctly connect power supply We advise to install `Bluetooth master module` The `State` is output foot for LED status, when bluetooth `Unconnected`, output `Pulse` ; when bluetooth `connected`, output `High level`, we can determine the states from `MCU` If only the board , No any `Bluetooth Function `

P09 Pay special attention to; The following are wrong connection methods: Of the following does not belong to quality problems, are all wiring error, not warranty caveat emptor: 1, since the voluntary testing after the success, the use of TXD or RXD and short circuit 2, module meet the power supply cause damage Product features: Using HC - 06 from module 1, a core module, which leads to the interface includes VCC, GND, TXD, RXD, reserved LED state output pin, MCU can state whether the bluetooth is connected through the foot, from machine KEY pin is invalid 2, the led indicates a bluetooth connection status, twinkle said there was no bluetooth connectivity, Chang Liang said bluetooth is connected and turned on the port 3, backplane `3.3 V, the input voltage 3.6 ~ 6 V, current when the unpaired about 30 ma, matching after about 10 ma, no more than 7 V input voltage! 4, interface level 3.3 V, can be connected directly to all kinds of single chip microcomputer (51, AVR, PIC, ARM, MSP430, etc.), 5 V single chip can be connected directly, without MAX232 couldn`t through MAX232. 5, clearing the effective distance of 10 meters, more than 10 meters is possible, but not to this distance connection quality After 6, pairing when full duplex serial port to use, do not need to know any bluetooth protocol, but supports only one in the eight data bits, stop bits and parity checking the communication format, which is the most commonly used communication format, does not support other formats. 7, when the bluetooth connection has not been established by pairing the AT command set baud rate, name, password, and set the parameters of the power save. After the bluetooth connection automatically switch to passthrough mode 8, small size (3.57 cm * 1.52 cm), SMT factory, ensure the quality of the patch. And set transparent heat shrinkable tube, dust and beautiful, and there are some antistatic ability. 9, this link for the machine, from the function and all kinds of computer with bluetooth, bluetooth host, with most of bluetooth mobile phone, PDA, PSP and other intelligent terminal pair, not matching between from the machine. Small common sense (very important) : TXD: sender, usually expressed as the sender, normal communication RXD must connect another equipment. RXD: receiver, usually expressed as the receiver, the normal communication TXD must connect another equipment. When normal communication itself TXD pick up equipment RXD forever! From collect spontaneous: normal communication RXD TXD connect other devices, so if you want to receive your send data as the name implies, namely receive your sending data, namely own TXD directly connected to the RXD, used to test the send and receive is normal, is the easiest fastest test method, when there is a problem to do the test first to determine whether the product failure. Also known as the loop back test.

Tockovi su odlicnog kvaliteta za razne namene precnik tocka je 7.5 cm tocak je silikonski sa lagerima nosivost 1 tocka je oko 80kg veća količina na stanju imam u ponudi dosta vrste tockica. Saljem post expresom aksom licno preuzimanje. POGLEDATI OSTALE MOJE OGLASE U PONUDI IMAM DOSTA VRSTE TOCKICA

napojni kabli za usisivac 2x0,75mm 300/500W duzina 6m

Ekran nije izgreban, ali leva polovina ekrana nije osetljiva na dodir. Ostalo je u koliko toliko dobrom stanju (pogledajte i slike), mada ga davno nisam koristio. Može da se popravi ekran, ali se možda više isplati za delove. Uz njega ide samo baterija. Ne ide punjač.

ŠIFRA: 1542 - Mrežni prekidač sa polugom za montažu na šasiju, - Tip: DPDT (Double Pole Double Throw), - Model: KCD2-02, - Broj pinova: 6, - Funkcija: ON/OFF/ON, - Maksimalni radni napon: 250VAC, - Maksimalna struja: 16A, - Dimenzije otvora za montažu: 30x22mm.

Stanje Kao na slikama prodaje se sa punjacem baterija dobra

4 MHz Dual Asynchronous Receiver/Transmitter, DIP-40 Z80A Dart

ALUMINIJUMSKA VISOKO OTPORNA TRAKA 9 METARA BRAON

Automatsko paljenje svetla nocu u vasem dvoristu , ulici , basti ili gde vam vec odgovara. Varijanta koja radi na 12V pa je zgodna za akumulatrosko napajanje. AC/DC 12V 10A. Dimenzije: 3.5cm x 4.2cm x 5cm. Ukoliko se montira kao na slici pozeljno je da se stavi pod neku nadstresnicu. Ukoliko se montira bez savet je da se montira kontra ali da se senzor koji se nalazi unutra okrene da gleda navise.

Ispracan rele sa cetiri preklopa , spula na 24 volta ac

Arduino vremenski modul RTC DS1302 (Real Time Clock Module) sa AT24C32 EEPROM-om. Sat do 2100. godine i kalkulacijom sekundi, minuta, dana, sedmica, meseci i godina. Karakteristike: - Vcc je 5V i TTL kompatibilan - Trožični interfejs - Radna temperatura: -40 C do +85 C - Privremeno skladištenje podataka u RAM memoriju - Radni napon: 2-5,5V DC - Memorija: AT24C32 (kapacitet 32K) - Struja: 300 nA - Dimenzije: 44mm x 23mm x 16 mm - Interfejs: IIC (I2C), - Koristi CR2032 bateriju Šifra: B1171

ŠIFRA: 1209 - Kondenztaor za motore, - Maksimalni radni napon: 450VAC, - Vrednost 30uF, - Dimenzije: 45x95mm, - Način povezivanja: putem kablovskih papučica- auto buksni, - Broj pinova: 4, - Tolerancija: 5%, - Samoobnavljajuci metaliziran polipropilen film, - Elementi kondezatora su potopljeni u smolu, - Samogasivo plastično kućište, - PrikljuČak: muška buksna 0.8x6.35 dupla, - Nosač kondezatora sa maticom M8x12.

ŠIFRA: 1359 - Kutija sa zakretnim prekidačem, - Idealna za upravljanje industrijskim mašinama, - Materijal: ABS, - Model: EL1-B, - Stepen IP zaštite: IP44, - Boja: crno/bela, - Sadrži normalno otvoreni (NO) kontakt, - Dimenzije: 68x68x50mm.

ŠIFRA: 1208 - Kondenztaor za motore, - Maksimalni radni napon: 450VAC, - Vrednost 35uF, - Dimenzije: 45x90mm, - Način povezivanja: putem kablovskih papučica- auto buksni, - Broj pinova: 4, - Tolerancija: 5%, - Samoobnavljajuci metaliziran polipropilen film, - Elementi kondezatora su potopljeni u smolu, - Samogasivo plastično kućište, - PrikljuČak: muška buksna 0.8x6.35 dupla, - Nosač kondezatora sa maticom M8x12.

sabirnica u kucistu,polovna,sa 15 otvora za nulu i 15 otvora za uzemljenje.na lageru ima dva komada.cena je po komadu.za sve informacije pitajte.

Releji tako reci nisu bili u upotrebi ali sam stavio da su polovni,ispravni i probani za napon spulne od 24V DC i dva preklopna kontakta i signalizacije za ukljucenje.

Semerinzi tipa AS – od NBR gume, kompletno standardno izvođenje sa prašinarom dimenzije 142x168x17 mm. Proizvođač - Inis, Niš

Modul preko koga mogu da se pune i prazne 6 Li-Ion ili litijumske baterije - 6S. Predvidjen je za radne struje do 15A a maksimalne trenutne do 25A. Description: Feature: Fine workmanship and durable. For the rechargeable (generally refers to the lithium battery) from the protection of the integrated circuit board. Lithium battery (rechargeable type) so need protection. As the lithium battery itself determines the material itself can not be overcharge, over discharge, overcurrent, short circuit and ultra-high temperature charge and discharge, so lithium battery lithium components will always follow a protective resistor with a sampling resistor and a current fuse. Specification: Brand new Lampshift maximum discharge current: 15A Instantaneous discharge current: 25A Charging voltage: 25.5V Charging current: 15A (MAX) Overcharge detection voltage: 4.28 ± 0.05V Overcharge protection delay: 0.1S Overcharge release voltage: 4.08 ± 0.05V Over discharge detection voltage: 2.55 ± 0.08V Overdischarge detection delay: 0.1S The overdischarge release voltage: 2.9 ± 0.1V Overcurrent detection voltage: 150mV Overcurrent detection delay: 9MS Overcurrent protection current: 30 ± 3A Overcurrent protection release condition: Disconnect the load Short circuit detection delay: 250uS Short circuit protection Release condition: disconnect negative open Main circuit conduction resistance: ≤20mΩ Working current: ≤30uA Sleep current (battery over discharge) ≤10uA Temperature range: -30 / + 80 ℃ Size: approx. 5x3.2cm/1.97x1.26inch

Krst kardana KK 22x65 Prvi broj označava prečnik čašice, a drugi dužinu krsta

Krst kardana KK 25x76 Prvi broj označava prečnik čašice, a drugi dužinu krsta

Krst kardana KK 24x88 Prvi broj označava prečnik čašice, a drugi dužinu krsta

Krst kardana KK 27x70 Prvi broj označava prečnik čašice, a drugi dužinu krsta

Krst kardana KK 25x64 Prvi broj označava prečnik čašice, a drugi dužinu krsta