K03 Ulazni napon:3,2-40V Izlazni napon:1,25-35V Struja(max):2A(10W) Efikasnost:92%(max) Radna temperatura:-45C~+85C Dimenzije:43mmx21mmx14mm

P06 Highlights Contains the voltmeter, ammeter, power meter, USB interface for charging the digital products. Note 1.When you use the product, the module inputs and outputs to be isolated from ground. 2.USB output voltage is consistent with the module, not a fixed 5V output. When charging for digital equipment, make sure USB output voltage is 5V. 3.Some customers report: ?The module can not adjust the output voltage is always equal to the input voltage.? When you encounter this problem, please counterclockwise rotation of the ?voltage potentiometer? 10 laps or more, then use the module you can adjust the output voltage. Because the factory default output voltage of about 20V. Specifications 1.Input voltage range:5-36VDC 2.Output voltage range:1.25-32VDC adjustable 3.Output current: 0-5A 4.Output power: 75W 5.High efficiency up to 96% 6.Built in thermal shutdown function 7.Built in current limit function 8.Built in output short protection function 9.Input reverse polarity protection: None (if required, high current diode in series with the input). 10.L x W x H =68.2×38.8×15mm 11.Weight: 39g Application 1.Use as a step-down modules with overcurrent protection Usage: (1) Adjust the right button so that ?OUT? LED lighted, Digital meter shows the value of output voltage ,adjust the ?voltage potentiometer? so that the output voltage reaches the value you want. (2) Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the ?current potentiometer? so that the output current reaches a predetermined overcurrent protection value. (For example, the Digital meter displays the current value of 4A, then you can use the module to a maximum current of 4A) (3) Connected to the load. 2.Use as a battery charger Usage (1) Make sure you need to charge the battery float voltage and charging current; (if lithium parameters 3.7V/2200mAh, then the float voltage is 4.2V, the maximum charging current 1C, ie 2200mA) (2)Under no-load conditions, adjust the ?Voltage potentiometer? so that the output voltage reaches the float voltage; (if to 3.7V rechargeable lithium battery, the output voltage can be adjusted to 4.2V) (3)Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the ?current potentiometer? so that the output current reaches a predetermined Charging current value. (4)Charge turn lamp current factory default is 0.1 times the charging current; (Battery during charging current is gradually reduced, if the charge current setting is 1A, then when the charge current is less than 0.1A, blue lights turned off, the green light is on, which means that the battery is fully charged) (5)connected to the battery charge. (1,2,3,4 steps as: Output is unloaded, do not connect the battery) 3.Use as a LED constant current driver module Usage (1)Adjust the voltage potentiometer so that the output voltage reaches the value you want. (2)Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the current potentiometer so that the output current reaches a predetermined LED operating current. (3)Connect LED, work. (1,2 steps as: Output is unloaded, do not connect LED) Voltmeter and ammeter calibration method Module with manual calibration function can correct display precision voltage and current, if you think the current voltage and current accuracy to meet the requirements, do not perform the following operations. (1) Output voltage calibration steps Step 1, adjust the right button so that ?OUT? LED lighted, Digital meter shows the value of output voltage; Press the right button for more than 2 seconds, release, Digital meter and ?OUT? LED flashes in synchronization so that you enter the output voltage calibration mode. Step 2, press the right button (normal speed), the voltage value is adding up a unit; Press the left button, minus a unit; Due to a unit is less than 0.1V, the minimum voltage display to 0.1V, so you need to continuously press 1-5 times to see the voltmeter change 0.1V, how many times voltmeter change 0.1V by pressing the key, depending on the current display voltage, the higher the voltage, the fewer the number of press. Step 3, press the right button for more than 2 seconds, release, to exit the output voltage calibration mode. All parameters set to automatically power down to save. (2) Input voltage calibration steps Step 1, adjust the right button so that ?IN? LED lighted, Digital meter shows the value of input voltage; press the right button for more than 2 seconds, release, Digital meter and ?IN? LED flashes in synchronization so that you enter the input voltage calibration mode. Steps 2 and 3, consistent with the output voltage calibration method. (3)Output current calibration steps Step 1, adjust the right button so that Digital meter shows the value of output Current. Press the right button for more than 2 seconds, release, Digital meter flashes in synchronization so that you enter the output current calibration mode. Step 2,Connected to the load, ammeter in series, adjust the right and left button to change the display of digital meter, so that is consistent with the ammeter display

Temperaturna sonda 0~800℃- K tip sa papučicom 6mm rupe Karakteristike: - Temperatura: 0~800 ℃ - Tip: K (Ni-Cr, Ni-Al - niklhrom, niklaluminijum) - Dužina: L = 5 m - Dvožična veza - Ispitni deo: F6 mm otvor / 12mm spolja prečnik

The MPU-6050 sensor contains a MEMS accelerometer and a MEMS gyro in a single chip. It is very accurate, since it contains 16-bits analog to digital conversion hardware for each channel. Therefor it captures the x, y, and z channel at the same time. MPU 6050 Motion Sensor module first integrated 3-axis gyroscope, 3-axis accelerometer Chip: MPU-6050 Power supply: 3v-5V power gyroscope range: + 250 500 1000 2000 °/ s Acceleration range: ± 2 ± 4 ± 8 ± 16 g

Digitalni tajmer za podešavanje automatskog uključivanja i isključivanja različnih električnih uređaja. Digitalni tajmer koji radi na 24V sa relejom 16A i 17 programa od najmanje 1 miuta do maskimalno 168 sati, koji se ponavljaju za paljenje i gašenje. Karakteristike: - Model: CN101A - LCD ekran - 24h i 7 dana programiranja (za celu nedelju) - Mogućnost mauelnog uključenja/isključenja (MANUAL ON / AUTO / MANUAL OFF) - Zadržava memorisane programe i pri nestanku struje - Napajanje: 24 V DC/AC - Interna baterija: 1.2V / 40mA - punjiva - Struja i napon relea: 16A otporno (8A induktivno) / 250V AC - Dimenzije: 60 x 60 x 30 mm Primer 1: Podesite neki uređaj (npr. veš mašinu) da se uključi za vreme niže tarife, ili peć da se uključuje svako veče u 00h i gasi u 08h... Primer 2: Podesite vremenski prekidač da pali i gasi svetlo kada niste kod kuće...

Gotov modul pojacala 30W+30W , napon napajanja 8V-26V DC, impedansa zvucnika 4-8ohm Uredjaj se isporucuje sklopljen, spreman za upotrebu. Novo nekorisceno

Čivije elastične DIN 1481 2,5x25

nozevi od mlina visoke tvrdoce zvoni ko zvono za kovace....itd oko 30 cm duzine

Digitalni brojač - sa induktivnim senzorom ili tasterom Brojač koji može da se upotrebin na neograničen broj načina. Poseduje induktivni senzor za brojanje, ali je moguće umesto njega staviti i taster po želji. Poseduje dugme za pauziranje brojanja i reset dugme kako sa prednje strane tako i sa zadnje u vidu kontakata za taster koji može da se priključi u vidu nekog krajnjeg prekidača. Karakteristike: - Tip: brojač - Način rada: digitalan (napajanje mu je baterija 1.5V AA) - Broj cifara: 5 (od 0 do 99.999) - Induktivni senzor: 110 cm - Okruženje: -5~40 C - Minimalan impuls: 10 mS - Dimenzije: 64 x 38 x 38 mm - Dimenzije otvora: 61 x 36 mm U kompletu: - Brojač sa baterijom AA 1,5V - Induktivni senzor - Magnet za detekciju - Uputstvo za montažu

Hermeticna komora sa manometrom. Nisam u mogucnosti da ispitam da li je manometar ispravan tako da se manometar vodi kao neispitan. Hermaticka komora

Pojačalo, cena se odnosi na jedan komad. Pakovanje SOIC-14. Broj kanala: 4 SMD/SMT Oznaka: 23M21L_84 TLC2264I Šifra: L1013

Cevi su nove, cena je za komad.

ŠIFRA: 803 - Taster za PCB montažu, - Dimenzija: 6x3x4.3mm, - Broj pinova: 2, - Maksimalni radni napon: 12VDC, - Maksimalna struja: 0.1A, - Sila pritiska: 1.3N, - Životni vek: 100000 operacija, - Pakovanje 50 komada.

6305 2RS KYK lager Proizvodjac KYK Japan

Sinhroni elektro motor sa reduktorom velikog obrtnoga momenta neophodan u raznim primenama. Karakteristike: - Model: 68KTYZ - Napajanje: 220 V AC / 50 Hz - Brzina na osovini: 60 RPM (60 obrtaja u minutu) - Snaga: 28 W - Obrtni moment: 4,5 Kgcm - Maksimlni obrtni moment: 12 Kgcm - Poseduje dva smera obrtanja Smer 1: Crvena i Crna žica Smer 2: Crna i Zelena žica

HLADNJAK CENA ZA 8 KOMAD

- Materijal: NdFeB (Neodymium Iron Boron), - Intezitet magnetnog polja: 12100 gaus, - Radna temperatura: 80°C, - Dimenzije: 15.24 x 3.18mm.

Elektrolitni kondenzator 2200 uF 50V Cena je za kom.

Trofazni elektromotor sa reduktorom HORMANN WA400 3x400V 0.37kW 16rpm 80Nm gabariti: 40x20x10 cm Motor koji je namenjen za otvaranje i zatvaranje specijalnih sekcionih vrata, ima dosta prateće elektronike (merenje pozicije, opterećenja itd). Nisam ispitivao elektroniku, ali motor kao motor radi fino i može se koristiti. Nedostaje mu poklopac klemberta.

Univerzalni SOIC, SOP8(EZ) SO8 na Dip 8 Adapter, odlican za razne programatore koji nemaju SMD podnozja tog tipa.

RFID bezkontaktna identifikaciona kartica za kontrolu pristupa koja radi na 13.56 MHz Moze da se koristi za Arduino, alarmne sisteme sa kontrolom pristupa kao i ostale namene gde se koriste 13.56 MHz kartice. Kartica poseduje svoj kod. Karakteristike: - Operativna frekvencija: 13.56 MHz - Boja: BELA - Distanca: 0-10 cm - Dimenzije: 86 x 54 x 0.8 mm (kao standardna platna kartica) - EEPROM trajan preko 10 godina

Mali kompletic za bezicni prenos podataka izmedju mikrokontrolera, raznih senzora i drugih uredjaja. Nezaobilazna spravica u raznim projektima koji zahtevaju bezicnu komunikaciju. TX Technical Specifications: Working voltage: 3V～12V B． Working current: max≤40mA (12V), min≤9mA(3V) C． Resonance mode: sound wave resonance (SAW) D． Modulation mode: ASK /OOK E． Working frequency: 315MHz-433.92MHz, customized frequency is available. Transmission power: 25mW (315MHz at 12V) G． Frequency error: +150kHz (max) Velocity: ≤10Kbps I． Self-owned codes: negative RX Technical Specifications: Working voltage: 5.0VDC +0.5V B． Working current:≤5.5mA (5.0VDC) C． Working principle: single chip superregeneration receiving Working method: OOK/ASK E． Working frequency: 315MHz-433.92MHz, customized frequency is available. Bandwidth: 2MHz (315MHz, having result from testing at lowing the sensitivity 3dBm) Sensitivity: excel –100dBm (50Ω) Transmitting velocity: < 9.6Kbps (at 315MHz and -95dBm)

Napajanje za Siemens PLC S7-200 SITOP power 3.5 6EP 1332-1B31 Ispravno

Fasadna premium traka sa solvent lepkom je proizvod visokog kvaliteta koji je namenjen zaštiti površina prilikom izrade fasada. Traka je dizajnirana za korišćenje na otvorenom i ima ukupnu debljinu od 145 mikrona. Glavna prednost ove trake je unapređena tehnika lepljenja koja omogućava dugotrajnu i pouzdanu zaštitu od spoljnih uslova. Preporuka je da se traka ukloni nakon 72h od njenog apliciranja na površinu, što omogućava optimalno vreme za zaštitu. Još jedna prednost ove trake je da ne ostavlja tragove lepka nakon uklanjanja, što čini njenom primenu praktičnom i efikasnom. Fasadna premium traka je takođe otporna na temperature do 90 stepeni, što je idealno za primenu u različitim vremenskim uslovima. Uz sve navedene prednosti, ova traka je savršen izbor za sve koji žele da zaštite svoje površine prilikom izrade fasada i to bez ikakvih problema sa uklanjanjem nakon završetka posla.

Ispravni,cena je za jedan tranzistor.