KUTIJA manja sa pregradama-klaser/organizer Ova kutija sluzi za razvrstavanje raznih sitnijih stvari (elektronika, srafovi i svasta nesto drugo). Gabaritne dimenzije su 20.3x27.6x4.2cm. Ima ukupno 21 pregradu od kojih su 20 dimenzija oko 3.7x3.3cm. Dvadeset prva pregrada ima dimenzije oko 17.6x3.7cm. Kutija ima dve kopce kojim se poklopac cvrsto zatvara. Kutija je uradjena od plastike. Providno je matirana i po meni bas dobrog kvaliteta. Na fotografijama mozete pogledati detalje. Ako Vam nesto nije jasno ili smatrate da nisam napisao pitajte i ja cu Vam odgovoriti. SLANJE-ISPORUKA-DOSTAVA -Saljemo navedenom kurirskom sluzbom. -Placanje kupljenog predmeta je moguce samo na navedene nacine. -Postanske troskove placa kupac prema tarifi odabrane poste. -Licno preuzimanje je iskljucivo na mojoj adresi. -Ostale varijante slanja i placanja mi za sada ne odgovaraju.

- Set termobužira bele boje, - Više veličina u paketu, - Za zaštitu delova gde se javlja velika razlika u prečniku, - Boja: bela, - Prečnik: 1.5-13 mm, - Skupljeni prečnik: 0.75-6.5 mm, - Temperatura skupljanja: 70°C do 125°, - Radna temperature: -55°C do 125°C, - Pakovanje: 30x1.5 / 30x2.5 / 20x4 / 10x6 / 6x10 / 4x13 kom/mm (dužina 100 mm).

- Merni kablovi sa silikonskom izolacijom, - Fleksibilni, izdržljivi i komforni za korištenje, - Odvojive izolacione kapice, - Kategorija merenja: CAT II 1000 V; CAT III 1000 V; CAT IV 600 V, - Maksimalna struja: 10 A, - Dužina kabela: 1.2 m (20AWG), - Priključci: Banana priključci prečnika 4 mm, - Dimenzije: 145 mm (dužina drške), 2 mm (prečnik mernog vrha).

32207 ZKL/ZVL lezaj 35x72x24,25 mm ZKL- Češka ZVL- Slovačka

P08 o Brand new and high quality. o Type K Type. o Temperature Range:0-800°C. o External Shielding:Metal Shield. o Total Length:2m

Silikonska zaptivna traka Dužina: 3m Širina: 25mm Debljina: 0,3mm Boja: crna Samolepiva, otporna na visoke temperature, vodootporna Radna temperatura: -50 ℃ to + 260 ℃ (na kratko može i do 300℃) Na temperaturi do 200℃ je izuzetno trajna i pouzdana do 10godina Fleksibilna i može se istezati do 5 puta od osnovne dužine. Prilikom korišćenja potrebno je umereno istezanje (20% -100%) Pogodna za zaptivanje vodovodnih, kanalizacionih cevi, cevi za grejanje, za razna creva u auto industriji... Moguće lično preuzimanje, ili slanje brzom poštom POST EXPRESS (poštarinu plaća kupac)

Induktivni senzor - SN04-P - 4mm - PNP - 10-30VDC - NO Induktivni senzor za detekciju metalnih predmeta. Karakteristike: - Oznaka: SN04-P - Kvadratni presek senzora: 18 x 18 mm - Napon napajanja: 10-30 V DC - Izlaz: 300 mA - 3 žice - Polaritet: PNP - Dimenzije: 18 x 18 x 35 mm - Dužina kabla za konekciju: 80 cm - Distanca detekcije: 4 mm - Status senzora: NO (normalno otvoren) - Objekat za detekciju: indukcioni 15x15x1mm - Radna temperatura: -25~75 °C - Otpor izolacije: ≥ 50 MΩ - Materijal kučišta: Plastika - Stepen zaštite: IP67 - Boja: Nekad plava, nekad zelena Povezivanje: - braon - napajanje, + polaritet - plava - napajanje, masa, - polaritet - crna - izlaz - prilikom nailaska objekta na izlazu se pojavljuje + polaritet ulaznoga napona napajanja

ŠIFRA: 1664 - Set SMD kondenzatora, - Veličina kućišta: 0603, - Set sadrži ukupno 320 komada SMD kondenzatora, vrednosti od 10pF do 22uF (ukupno 16 različitih vrednosti), - Sadrži 6 različitih vrednosti kondenzatora, a od svake po 20 komada, - Kondenzatori su razvrstani po sledećim vrednostima: 10pF, 22pF, 33pF, 47pF, 220pF, 470pF, 1nF, 2.2nF, 10nF, 100nF, 470nF, 1uF, 2.2uF, 4.7uF, 10uF i 22uF (po 20 komada od svake vrednosti).

Krst kardana KK 32x82 Prvi broj označava prečnik čašice, a drugi dužinu krsta

Napon : 4.8 V Kapacitet : 60 mAh Sastav : Ni-MH Izvedba : Za PCB, 3 x pin Dimenzije : 16.3x25.4 mm ---------------- Napajaja delove koje pamte određene podatke Ima primenu u elektronici Izvedba za štampanu ploču

77940 - fi 150mm Proizvodjač: Festa Češka

P14 2x16 LCD Display HD44780U Shield with push buttons Here we have a very popular LCD Keypad shield for the Arduino. It includes a 2x16 LCD display and 6 momentary push buttons. Pins 4, 5, 6, 7, 8, 9 and 10 are used to interface with the LCD. Analog Pin 0 is used to read the pushbuttons. The LCD shield supports contrast adjustment and backlit on/off functions. It also expands analog pins for easy analog sensor reading and display. Below the shield can be seen attached to an Arduino UNO. Operating Voltage : 5V 6 Push buttons Expanded Analog Pinout 2x16 LCD display blue backlight Supports contrast adjustment Backlit on/off functions

- Krokodil AK2B, - Za bananu 4mm, - Boja: crna.

- Šuko utikač (R/A CEE 7/7) - euro utičnica (R/A IEC 320-C13), - Dužina: 2m, - Boja: crna.

Temperaturna sonda -40-110℃- NTC tip sa M8 zavrtnjom Karakteristike: - Temperatura: -40-110 ℃ - Tip: NTC (10kohm±1% 3950) - Dužina: 1 m - Dimenzije ispitnoga dela: M8 navoj - Dvožična veza - Konektor za priključenje - Vodootporna - B konstanta 3950K -/+ 1% - Tipična disipacija: 5 mW/°C - Otpornost izolacije: > 100 MOhm - Napon u piku: 1800V AC - 1ma - 1 sekunda - Naprezanje: 9.8 N (1kgF) 1 minut bez deformacije

Fleksibilna spojnica za step motore CNC mašina i slične projekte. Dimenzije: - d1 = 10 mm - d2 = 10 mm - D = 20 mm - L = 25 mm Karakteristike: - Materijal: Aluminijum - Fiksiranje: 4 imbus zavrtnja M3 - Obrtni moment: 1.7 Nm - Maksimalni obrtni moment: 3.4 Nm - Maksimalna brzina: 8000 obrtaja/minutu

P06 Highlights Contains the voltmeter, ammeter, power meter, USB interface for charging the digital products. Note 1.When you use the product, the module inputs and outputs to be isolated from ground. 2.USB output voltage is consistent with the module, not a fixed 5V output. When charging for digital equipment, make sure USB output voltage is 5V. 3.Some customers report: ?The module can not adjust the output voltage is always equal to the input voltage.? When you encounter this problem, please counterclockwise rotation of the ?voltage potentiometer? 10 laps or more, then use the module you can adjust the output voltage. Because the factory default output voltage of about 20V. Specifications 1.Input voltage range:5-36VDC 2.Output voltage range:1.25-32VDC adjustable 3.Output current: 0-5A 4.Output power: 75W 5.High efficiency up to 96% 6.Built in thermal shutdown function 7.Built in current limit function 8.Built in output short protection function 9.Input reverse polarity protection: None (if required, high current diode in series with the input). 10.L x W x H =68.2×38.8×15mm 11.Weight: 39g Application 1.Use as a step-down modules with overcurrent protection Usage: (1) Adjust the right button so that ?OUT? LED lighted, Digital meter shows the value of output voltage ,adjust the ?voltage potentiometer? so that the output voltage reaches the value you want. (2) Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the ?current potentiometer? so that the output current reaches a predetermined overcurrent protection value. (For example, the Digital meter displays the current value of 4A, then you can use the module to a maximum current of 4A) (3) Connected to the load. 2.Use as a battery charger Usage (1) Make sure you need to charge the battery float voltage and charging current; (if lithium parameters 3.7V/2200mAh, then the float voltage is 4.2V, the maximum charging current 1C, ie 2200mA) (2)Under no-load conditions, adjust the ?Voltage potentiometer? so that the output voltage reaches the float voltage; (if to 3.7V rechargeable lithium battery, the output voltage can be adjusted to 4.2V) (3)Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the ?current potentiometer? so that the output current reaches a predetermined Charging current value. (4)Charge turn lamp current factory default is 0.1 times the charging current; (Battery during charging current is gradually reduced, if the charge current setting is 1A, then when the charge current is less than 0.1A, blue lights turned off, the green light is on, which means that the battery is fully charged) (5)connected to the battery charge. (1,2,3,4 steps as: Output is unloaded, do not connect the battery) 3.Use as a LED constant current driver module Usage (1)Adjust the voltage potentiometer so that the output voltage reaches the value you want. (2)Adjust the right button so that Digital meter shows the value of output current;Wire shorted output terminal, then adjust the current potentiometer so that the output current reaches a predetermined LED operating current. (3)Connect LED, work. (1,2 steps as: Output is unloaded, do not connect LED) Voltmeter and ammeter calibration method Module with manual calibration function can correct display precision voltage and current, if you think the current voltage and current accuracy to meet the requirements, do not perform the following operations. (1) Output voltage calibration steps Step 1, adjust the right button so that ?OUT? LED lighted, Digital meter shows the value of output voltage; Press the right button for more than 2 seconds, release, Digital meter and ?OUT? LED flashes in synchronization so that you enter the output voltage calibration mode. Step 2, press the right button (normal speed), the voltage value is adding up a unit; Press the left button, minus a unit; Due to a unit is less than 0.1V, the minimum voltage display to 0.1V, so you need to continuously press 1-5 times to see the voltmeter change 0.1V, how many times voltmeter change 0.1V by pressing the key, depending on the current display voltage, the higher the voltage, the fewer the number of press. Step 3, press the right button for more than 2 seconds, release, to exit the output voltage calibration mode. All parameters set to automatically power down to save. (2) Input voltage calibration steps Step 1, adjust the right button so that ?IN? LED lighted, Digital meter shows the value of input voltage; press the right button for more than 2 seconds, release, Digital meter and ?IN? LED flashes in synchronization so that you enter the input voltage calibration mode. Steps 2 and 3, consistent with the output voltage calibration method. (3)Output current calibration steps Step 1, adjust the right button so that Digital meter shows the value of output Current. Press the right button for more than 2 seconds, release, Digital meter flashes in synchronization so that you enter the output current calibration mode. Step 2,Connected to the load, ammeter in series, adjust the right and left button to change the display of digital meter, so that is consistent with the ammeter display

Cevi su nove, cena je za komad.