MADJARSKA 5 F 1848

- Prekidač za ugradnju sa tinjalicom, - Tip: SPST (Single Pole Single Throw), - Boja tinjalice: crvena, - Broj pinova: 3 - Funkcija: ON/OFF, - Dimenzije otvora za montažu: 13x19mm.

Ostrva Man

MODUL UTIČNICA TELEFOONSKA BELA 1M

LED SENZOR POKRETA 1200W IP65 - HYUNDAI

GRLO ZA SIJALICU E14 BAKELITNO

P01 1. Support Lead-acid battery and Acting Battery,voltage range:6V~60V; 2. Can display voltage,percent of battery,charging time at the same time through LCD; 3. The function is very powerful,realizes the automatic charge control, the control charge time, also may set up and uploads the corresponding parameter through the serial port; Function description 1. Automatic Charge control function: By setting the volt-HI:`UP` volt-LI:`dn`;When the battery voltage is below the volt-LI:`dn`,the relay leads,the charger begins to charge the battery;when the battery voltage is up to volt-HI:`UP`,the relay is diconnected and the automatic charge is completed once; 2. Charge Time Control Function: How to turn on the time control function? After entering the parameter set, set the parameter op is non-zero, then turn on the time control function, op default parameter is:--:--h, the default does not turn on time control function; After the opening Time control function (OP is non-zero), when the battery voltage is the lower volt-LI`dn`, the charger began to charge the battery, the system began to clock; During the timing, the battery voltage ≥ volt-HI`UP`, relay disconnect; If the OP time is up, the battery voltage is still the lower volt-LI`dn`, the relay keeps the conduction, automatically closes the charge time control function, and flashes the H:ER to remind the user, the time parameter setting is unreasonable; Press any key to stop flashing; Note: Time format: 00:59 (00 for hours, 59 for minutes) The maximum time is 99:59, which is 100 hours. 3. Serial data upload and parameter setting function: The system supports UART data upload and parameter setting UART:115200,8,1 Cmd Func on Relays enable to open off Relays disable to open start Start data upload stop Stop data upload read Read the param setting dw10.0 Set volt-LI:`dn` up20.0 Set volt-HI:`UP` xx:xx Set the charge time OP 00:00 stop charge time Data Upload message Format: Battery voltage + battery percent + charge time + charge status 12.0V,020%,00:10,OP Parameter Setting a) Press and hold the SET key to enter the setting interface; b) Switch the parameters you want to set by short press SET; c) After the selection of parameters, can be set by the UP/DOWN key to support the short press, long press (fast increase or decrease); To set other parameters, repeat step b, c); d) After all parameters are set, long press set key to exit and save; The Key Function Description: In the Run interface (main interface): Short press SET button to display the current set of parameters; Short press UP button, toggle display charge percentage and charging time; Short Press DOWN button, select Turn on/off relay enabling, if the relay can be closed, will show ` off ` as a reminder; Long press UP button, switch low power state on:No operation in 10 minutes turn off backlight OFF: Backlight is always bright Long press SET button,enter the parameter settings. Calculation of voltage percentage: voltage percentage = battery voltage/(volt-HI – volt-LI) Additional Features a) Charging time recording function: not open charging time control, the product will record a full time, when the entry time display interface, flashing display charging time, and then exit time display interface or next charge to open (relay conduction) when empty; b) Automatic parameter detection: When the parameters are set, exit, if volt-LI dn≥ volt-HI UP, the system will flash display `ERR` as a reminder; c) Battery Access detection: This product attached to the battery, if not connected to the battery, the system will be shown in the downlink `NbE` as a reminder Analysis of common failures Q: How much is suitable for V level use? How much v voltage does this module fit? A: This section is suitable for the minimum 6V, the highest 60V voltage range, the maximum expenditure level 48V, because 48V battery full of electricity in 60V, and then a high fever, if your battery is higher than 48V, please select other section. Q: The power of the subsequent electrical appliances snapped! LED flashing? A: This is because your charging current is too large or the battery capacity is too small to cause a power to immediately reach the voltage limit, relay disconnect, disconnect, the voltage and quickly down to the lower voltage, and began to recharge, cycle, at this time you want to reduce the charging current only line, Usually the charging current is the battery capacity of the very 1 to 1.5, such as 20AH battery charging current generally around 2-3a! Note that a large current charge will cause the battery fever accelerated aging, drum kits and even explosions! Q: What control mode? Can I cycle the charge automatically? Can I use the side charge? Can I limit the flow? A: This is voltage control, For example, set the voltage limit of 12.0V, voltage up to 14.5V, voltage charge to 14.5V this value on the power off, voltage down to the 12.0V relay closed and start charging, can be filled with side, voltage control mode only to turn off and open, can not limit the flow, charging current completely depends on your charger! Q: Input 12V can or not charge 24V battery, or enter 48V can give 12V battery charge? A:This is a simple voltage controller, only play the role of switch, can not swing to the battery charge, so you want to give what battery charge to be ready what kind of charger! It`s necessary!

Ovaj programator se koristi za rad sa CPLD i FPGA. Podržava radni napon u opsegu od 1 do 5.5VDC. Karakteristike: Podržani CPLD: MAX 3000A、MAX 7000A、MAX 7000B、MAX 7000S、MAX 9000、MAX 9000A and MAX II. Podržani FPGA: Stratix、Stratix II、Stratix GX、Cyclone、Cyclone II、Cyclone III、ACEX 1K、APEX II、APEX 20K、APEX 20KE、APEX 20KC、FLEX 10K、FLEX 10KE、FLEX 10KA、FLEX 6000、FLEX 8000、EPCS1、EPCS4、EPCS16、EPCS64EPC1、EPC4、EPC8、EPC16. Podržani modovi: JTAG, AS, PS Podržava NiosII embeded core based debug, Quartus II SignalTap II Logic Analyzer Dimenzije: 5.5 x 2.8 x 1.5cm Šifra: B1214

- Smart senzor sa visokom osetljivošću, namenjen za detekciju minimalne količine prirodnog gasa (metana) i osigurava da budete na vreme upozoreni u slučaju povećane koncentracije gasa glasnim alarmom od 70 dB, - Povežite uređaj sa SmartLife/Tuya aplikacijom na Vašem telefonu i dobićete obaveštenje na svom telefonu, bez obzira gde se nalazite (ukoliko je Vaš telefon ima pristup internetu), - Rezultat je zaštita i osećaj sigurnosti za Vas i Vašu porodicu kod kuće, - Detektor se napaja iz mrežne utičnice i ima plug-in dizajn tako da ga lako možete postaviti u blizini bilo kog potencijalnog izvora ili curenja gasa, kao što su garaža ili kuhinja, - Važno: Ovaj proizvod sadrži veoma osetljive komponente. Uvek čuvajte i/ili koristite proizvod u radnom okruženju između -10 i 50°C, - Aplikaciju za android telefone možete preuzeti klikom na ovaj link: Tuya Android, - Aplikaciju za iOS telefone možete preuzeti klikom na ovaj link: Tuya iOS, - Tip: Smart detektor gasa, - Napajanje: 85-250 V~, - Potrošnja: Manje ili jednako 1.5 W, potrošnja u stanju pripravnosti: manje ili jednako 0.5 W, - Wi-Fi: 2.4 GHz, 802.11 b/g/n, - Kompatibilnost: iPhone, iPad (iOS 8.0 ili novije), Android (4.0 ili novije), - Jačina zvuka: 70 dB/m, - Vlažnost vazduha: Od 20% ~ do 85%, - Radna temperature: -10°C ~ +50°C, - IP zaštita: IP20, - Dimenzije: 75x46 mm.

- Otvorite i zatvorite, programirajte i glasovno kontrolišite (u kombinaciji sa Google Assistantom ili Amazon Aleksom) Vaše električne zavese, rolo zavese i roletne sa svog pametnog telefona, - Ovaj pametni prekidač se takođe može podesiti da radi kada je sa drugim uređajima povezan na SmartLife aplikaciju, na primer kada se zavese zatvaraju onda da se uključi svetlo, ili da ugasi prilikom otvaranja, da zatvara zavese pri zalasku Sunca itd., - Napomena: Za napajanje prekidača sa 230V~ uvek je potreban nulti provodnik!, - Aplikaciju za android telefone možete preuzeti klikom na ovaj link: Tuya Android, - Aplikaciju za iOS telefone možete preuzeti klikom na ovaj link: Tuya iOS, - Tip: SMART dimer prekidač svetla, - Napajanje: 90-250 V~, 50/60 Hz, - Maksimalna izlazna snaga: 10 A omski potrošač / MAX. 250 W induktivni potrošač, - Potrošnja u stanju pripravnosti: Manje ili jednako 0.2 W, - Wi-Fi: 2.4 GHz, IEEE802.11 b/g/n, - Kompatibilnost: iPhone, iPad (iOS 8.0 ili novije), Android (4.0 ili novije), - IP zaštita: IP20, - Radna temperature: -20°C ~ +70°C, - Dimenzije: 86x86x34 mm, - Ostale napomene: Za napajanje prekidača sa 230V~ uvek je potreban nulti provodnik!

PABLO PICASSO (1891-1973) WOMAN WITH HAIR-NET Printed in SWITZERLAND ŠVAJCARSKA RAZGLEDNICA NIJE PUTOVALA NIJE KORIŠĆENO GARANCIJA PERFEKT KOLEKCIONARSKI PRIMERAK Ekstra ******* GNatur16

ŠIFRA: 1688 - Set vodootpornih konektora, - U kompletu se isporučuju muški (za montažu na kabl) i ženski (za montažu na šasiju) konektor, - Na konektoru postoji zub za pravilnu orijentaciju, tako da je onemogućeno pogrešno povezivanje, - Ženski konektor poseduju zaštitnu kapu, kojom se može zatvoriti kada nije priključen muški (kablovski) konektor, - Broj pinova: 2, - Radna temperatura: -25°C...+110°C, - Relativna vlažnost: 90%...95%, - Stepen zaštite: IP68, - Prečnik otvora za montažu: 13mm, - Prečnik pina: 1.8mm, - Kontaktna otpornost: < 0.005Ω, - Maksimalni radni napon: 380VAC, - Maksimalna struja: 10A, - Odgovara provodnicima prečnika 4-6.5mm.

31. *Novi nekorisceni trimer potenciometri 100K oma. Manji horizontalni cetvrtasti. Deset komada za 300 din. *Robu šaljem kao preporučeno pismo u vazdusnoj koverti sa pracenjem, cime je postarina samo 200din. (na Vašu odgovornost) nakon uplate na moj racun ili Postexpressom kurirskom sluzbom (pouzećem) robu placate prilikom preuzimanja. Naravno moze i licno preuzimanje kome vise odgovara. *Molim za komunikaciju preko Kupindo poruka.

- Set termobužira bele boje, - Više veličina u paketu, - Za zaštitu delova gde se javlja velika razlika u prečniku, - Boja: bela, - Prečnik: 1.5-13 mm, - Skupljeni prečnik: 0.75-6.5 mm, - Temperatura skupljanja: 70°C do 125°, - Radna temperature: -55°C do 125°C, - Pakovanje: 30x1.5 / 30x2.5 / 20x4 / 10x6 / 6x10 / 4x13 kom/mm (dužina 100 mm).

Odesa, putovala 1972. na uglovima malo nagnječena

Amsterdam, čista, godine opredeljene proizvoljno, u izuzetnom stanju

Salzburg, pansion Klaus Ramsl, čista, vremenski period opredeljen proizvoljno

14 razglednica u boji - Lenjingrad, 1977g, 4 su `duple`, sa `postoljem` a 10 običnih.

TRIR (Nemačka) putovala 1988.

Odlično očuvana novčanica.

Kolor razglednica Kapri Postcard Italia Capri Jedna putovala 1966., druga nije korišćena K Š S 11 R3