Features Ultra-Compact, single driver, direct radiating subwoofer 12” (300mm) driver with 3” (75mm) voice coil Water resistant cone Large ports for reduced air noise Perforated steel grille Black or white standard colour options Integrated flying points Applications Live Music Clubs and Bars Nightclubs Bars and Restaurants Museums and AV Spaces Convention Centres Hotels Retail Outlets Leisure Centres Houses of Worship With a response of 48Hz-150Hz ± 3dB, the ultra-compact size of the SX112 makes it an ideal partner for ADORN or CDD Series systems where space is at a premium or where the subwoofers need to be hidden. The enclosure is constructed from plywood and has an impact-resistant finish, while the driver is protected by a rigid perforated steel grille, which is pre-curved to withstand physical damage. Finished in black (RAL9005) or white (RAL9016) as standard with integrated flying points, the SX112 can be also be supplied in any RAL colour to order. When used with full-range systems, crossover and EQ functions can either be performed by the DX0.5 or DX4.0 system controllers. TYPE Compact, single driver, direct radiating subwoofer FREQUENCY RESPONSE (1) 48Hz-150Hz ± 3dB -10dB @ 35Hz DRIVER 12” (300mm)/3” (75mm) voice coil, long excursion, ferrite magnet, waterproof cone RATED POWER (2) 400W AES, 1600W peak SENSITIVITY (10) 100dB MAXIMUM SPL (9) 126dB continuous, 132dB peak (half space) NOMINAL IMPEDANCE 8Ω DISPERSION (-6DB) Omnidirectional CROSSOVER 80-120Hz active ENCLOSURE 52 litre, Plywood FINISH Black or white textured paint PROTECTIVE GRILLE Black or white perforated steel CONNECTORS 2 x NL4 PIN CONNECTIONS Left to right: Input+, Input -, Link -, Link+ FITTINGS 12 x M10 inserts DIMENSIONS (W) 487mm x (H) 390mm x (D) 410mm (W) 19.2ins x (H) 15.4ins x (D) 16.1ins WEIGHT 21.5kg (47.3lbs)

*Reinforcement je kombinacija mikrofona, procesora signala, pojačala i zvučnika u kutijama koje kontroliše konzola za miksovanje, što čini da živi ili unapred snimljeni zvuci budu glasniji kao i i da se dobro čuju u većoj i udaljenoj publici. Opšte karakteristike: Kutija izrađena od polipropilena dizajnirana tako da eliminiše neželjene rezonance Custom FBT zvučnici sa većim linearnim kapacitetom ekskurzije i efikasnošću Kompresioni drajver od 25mm (1”), grlo od 35mm (1.4”) i špulna Dvokanalno pojačalo snage 1000W klase D za LF i klase AB za HF sa visokim dinamičkim opsegom za prijatan zvuk pri velikoj jačini. DSP sa 4 EQ preseta dizajnirana tako da mogu da prilagode zvuk zvučnika za različite primene i sredine u kojoj se nalazi postavka. Napredni algoritmi za filtriranje i glasnost koji menjaju dinamiku energije niske frekvencije u skladu sa odabranim presetom, dopuštajući visoku SPL performansu bez distorzije Kontrol panel sa XLR ulazom i link izlazom, 6.3mm džek stereo ulazom sa jačinom zvuka, stereo RCA ulazom sa jačinom zvuka, XLR selektorom za izlaz zajedno sa stereo / mono , HP filter on /off, mikrofon / line, DSP selektorom preseta Integrisani mikser sa dva stereo kanala, jednim kanalom za mic / line ulaz i izlaz zajedno sa XLR mono / stereo kako bi se oživeo drugi kanal stereo signala na drugi zvučnik. Prisustvo 4 preseta kojim upravlja DSP omogućava Vam da modifikujete odziv zvučnika na mnogo precizniji način u poređenju sa standardnim tonskim kontrolama. Pored toga, svaki preset je dizajniran i optimizovan u gluvoj sobi kako bi se dobilo najbolje moguće izvođenje za svaku primenu. ORIGINAL / LIVE: Idealni preset za zvučno pojačanje FLOOR / VOCAL: preset koji transformiše Vaš X-LITE kabinet za upotrebu monitora na sceni ili za vokale CLUB: poseban preset za bogati, duboki bas odziv koji lako ostaje u ušima slušaoca DJ: preset dizajniran tako da izvuče najbolje iz elektronske dens muzike. X-LITE 15A Obrađeni aktivni zvučnik 1000W - 128dB SPL Dvosistemska aktivna bas refleks kutija FBT Custom 380mm (15”) LF niskotonac sa kalemom od (2.5”) FBT 25mm (1”) sa grlom od /35mm (1.4”) i špulnom u HF kompresionom drajveru 42Hz to 20KHz frekventni odziv 90° H x 60° V horna za direktno usmeravanje 30° ili 45° nagib monitora X-LITE 15 Pasivni reinforcement zvučnik 400W/8ohm - 126dB SPL X-LITE 12A Obrađeni aktivni zvučnik 1000W - 127dB SPL Dvosistemska aktivna bas refleks kutija FBT Custom 320mm (12”) LF niskotonac sa kalemom od 50mm (2”) FBT 25mm (1”) sa grlom od /35mm (1.4”) i špulnom u HF kompresionom drajveru 50Hz to 20KHz frekventni odziv 90° H x 60° V horna za direktno usmeravanje 30 or 45° nagib monitora Šifra: 41311 Konfiguracija: Dvosistemska Preporučeno pojačalo: 300 W RMS Kontinuirana snaga: 150 W Peak snaga: 600 W Nominalna impedansa: 8 ohm Frekventni odziv: 56Hz - 20KHz -6dB Niskotonska jedinica: 12 / 2 coil inch Visokotonska jedinica: 1 / 1.4 coil inch Osetljivost (@1W/1m): 97 dB Maximum SPL cont/peak: 122 / 125 dB Disperzija 90 x 60 HxV Rezanje frekvencije: 2 KHz Preporučeni HP filter: HP 45Hz - 12-24db/oct Preporučeni spoljni filter: FBT DLM26 Ulazni konektor: 2 x SPEAKON Neto dimenzije (ŠxVxD): 356x619x357 / 14.01x24.37x14.05 mm/inch Neto težina: 14 / 30.8 kg/lb

Jamo S628 Dark apple set top top spajkovi i zidni nosaci 
Jamo S628 predstavlja odlično rešenje za prostorije svih veličina. Baziran je na S626 modelu, ali za razliku od njega ima nešto veće dimenzije, veći vufer i još jedan dodatni srednjetonac, pa može da pruži snažniji zvuk sa preciznijim srednjim i niskim tonovima. 
Studio 628 zvučnici su pogodni za veće stereo sisteme ili kao glavni prednji zvučnici u surround kućnom bioskopu. Obzirom da imaju vufere od 25cm, u manjim prostorijama mogu efektivno da zamene i subwoofer pa takođe štede na prostoru. 
Glavne karakteristike: 
Trosistemski dizajn - 1" tviter, tri 5" srednjetonca i 10" bas zvučnik (vufer)
Bass-reflex kućište za veću efikasnosti i snažniji bas, port je postavljen sa zadnje strane zvučnika
Specijalni talasovod za tviter, pruža bolju disperziju zvuka za poboljšanu dinamiku i jasnoću
Aluminijumska centre-plug kapa za prirodniji zvuk
Membrane srednjetonaca sa aluminijumom za veću čvrstoću i jasnoću vokala
Vuferi postavljeni u stranici za tanak dizajn kabineta
Dupli 5-way terminali, podržavaju bi-wire/bi-amp konfiguraciju i žicu do 12 AWG
Šiljci za zvučnike uključeni u paket, mogu se postaviti po želji za manji kontakt sa podom
Specifikacije: 
Tip: Trosistemski bass-reflex
Snaga (RMS / Max): 150W / 240W
Visokotonac: 1" (25mm) tviter
Srednjetonac: 3x 5" (127mm) srednjetonci
Niskotonac: 10" (254mm) vufer
Frekventni opseg: 37 - 20000 Hz
Osetljivost: 90 dB
Impedansa: 6Ω /li> 
Dimenzije: 1134 x 190 x 380 mm
Težina: 25.5 kg

Vrhunski zvucnici vise klase! Raspoloziva boja Crna Pogledajte sve moje oglase Danijel Moguca dostava do Beograda! Overall Dimensions (mm/in, HxWxD) 1000x195x301mm Power Handling (Watts Long/Short Term) 130 / 180 Weight (Kg/lb) 15,2 / 33,1 Woofer (mm/in) 2 x 165 / 6½ System Type 2-way bassreflex Tweeter (mm/in) 25 / 1 Frequency Response (Hz, +/-3dB) 45-20,000 Impedance 6 Sensitivity (dB, 2.8V/1m) 89 Product Finish Black, Dark Apple

Legendarna serija engleskih zvučnika, stanje perfektno

Veliki izbor profesionalnih/amaterskih alata za vaš dom ili radionicu Dvosistemska bas-refleksna kutija, namenjena za profesionalnu razglasnu upotrebu. Moguće ju je postaviti na stalak ili je oboriti i koristiti kao monitorsku zvučnu kutiju. Ova zvučna kutija ima i ugrađeno pojačalo sa trokanalnom miksetom i MP3/FM/BT multimedijski plejer. Direktno se mogu povezati spoljni izvori kao što su: multimedija plejeri, mikrofon, muzički instrument, CD/DVD plejer, mikseta, računar, mobilni telefon… Moguće je snimanje MP3 formata na USB/SD memoriju. Na izlaz zvučnika se može vezati jedna pasivna zvučna kutija (opcija: PAX41PRO). Moguće je i postavljanje na stalak 35 mm (opcija: HT900) Karakteristike: Napajanje: 230 V~ / 50 Hz Snaga: 200 W Frekventni opseg: 30-21000 Hz Osetljivost: 96 dB Impedansa: 8 Ohm Zvučnik Niskotonac: 15" / 2" / 40 Oz; visokotonac: 1" titanium / 9 Oz Priključci: USB/SD, AUX 3.5 mm, MIC 6.3 mm + XLR, LINE IN 2xRCA + XLR, LINE OUT 6.3 mm + XLR, SPEAKER OUT speakon Bluetooth: Da, 4.0 (domet 10 m max. ) Daljinski upravljač: Da Radio FM: radio sa automatskom pretragom stanica Pribor: Priključni kabel Masa: 13.5 kg Dimenzije: 460x710x360 mm Prenosna izvedba: Ne *Novo - u fabričkom pakovanju *Garancija i servis obezbeđeni 2 godine. Način dostave: Kurirska služba Roba se isporučuje na teritoriji Republike Srbije

Vrhunski zvucnici vise klase! Ocuvani kao novi drajveri! Raspoloziva boja Crna , Cherry , boja drveta cena od 250eur do 280 Danijel Moguca dostava do Beograda! Specifications Type: 3 way, 3 driver loudspeaker system Frequency Response: 40Hz to 20kHz Power Handling: 90W Recommended Amplifier: 175W (maximum) Crossover Frequency: 1000, 4000Hz Impedance: 8Ω Sensitivity: 90dB Bass: 1 x 200mm polyplas cone Midrange: 1 x 100mm polyplas cone Tweeter: 1 x 19mm titanium dome Enclosure: bass reflex Dimensions: 927 x 250 x 311mm Weight: 31.6kg

Pogledajte sve oglase Danijel Moguca dostava do Beograda! Generally Manufacturer: Canton Model: Karat M 70 DC Year of construction: 1999 - 2000 Color: ash black, , cherry, beech Dimensions: 170 x 1200 x 380 mm Weight: approx. 25 kg New price approx . : 700, - € (RRP / piece) Technical specifications Design: 3-way bass reflex, floorstanding speaker Chassis: Load capacity: 180/300 watts (nominal / music capacity) Woofer: 1x 260 mm cellulose / graphite Midrange: 2x 160 mm aluminum manganese Tweeter: 1x 25 mm aluminum manganese Efficiency: 88 dB / 1W / 1m Transmission range: 22-30,000 Hz Transition ranges: 180 / 3.200 Hz Impedance: 4 ohms

Features Slimline direct-radiator subwoofer 2 x 10” (250mm) drivers with 2” (50mm) voice coils Large ports for reduced air noise Perforated steel grille 4Ω nominal impedance M8 flying inserts Applications Portable sound reinforcement Live music clubs Bars and restaurants Nightclubs Corporate AV events and conferences Weddings and parties Secondary stages at festivals HoW, leisure centres and retail outlets The SX210 enclosure is constructed from plywood and finished in black textured paint as standard, with white and RAL colour finish-es available to special order. An impact-resistant perforated steel grille protects the drivers, and the enclosure has twin ergonomic handles at the rear for easy handling. Rubber feet on the base resist movement and align with recesses in the top surface to assist stacking. When used with full-range systems, crossover and EQ functions can be performed by the DX0.5 or DX4.0 system controller. The recommended amplifier is the VIA2502, or VIA5002 or VIA5004 depending upon the size of the overall system. TYPE Slimline dual, direct radiating subwoofer FREQUENCY RESPONSE (5) 50Hz-150Hz ± 3dB, -10dB @ 42Hz DRIVER 2 x 10” (250mm)/2” (50mm) voice coil, long excursion, ferrite magnet RATED POWER (2) 500W AES, 2000W peak SENSITIVITY (8) 103dB MAXIMUM SPL (9) 127dB continuous, 133dB peak (half space) NOMINAL IMPEDANCE 4Ω DISPERSION (-6DB) Omnidirectional CROSSOVER 80-120Hz active ENCLOSURE Birch/poplar ply FINISH Black textured paint PROTECTIVE GRILLE Black perforated steel CONNECTORS 4 x NL4 type PIN CONNECTIONS (INPUT) 1+/1- PIN CONNECTIONS (LINK) 1+/- to 1+/- FITTINGS 16 x M8 inserts, 2 x bar handles DIMENSIONS (W) 718mm x (H) 295mm x (D) 465mm (W) 28.3ins x (H) 11.4ins x (D) 18.3ins WEIGHT 20kg (44.1lbs)

Martin Audio Blackline X10 The loudspeaker shall be a passive, two-way system. Its transducers shall consist of a reflex-loaded 10” low frequency driver and a 1.4” diaphragm/1” exit compression driver mounted on a high frequency horn which shall be user-rotatable to enable vertical or horizontal orientation of the enclosure. Horizontal dispersion shall be 90° and vertical dispersion shall be 50°. The on-axis frequency response shall be 65Hz-20kHz +/- 3dB and the loudspeaker shall produce a maximum SPL of 124dB peak calculated at 1 metre. Power handling shall be 250W AES, 1000W peak. Rated impedance shall be 8 ohms. The rear connector panel shall be fitted with two NL4 type connectors. Low and high frequency sections shall be integrated by an internal 2.4kHz passive network. For optimal performance the loudspeaker shall be operated in conjunction with a dedicated electronic controller. The symmetrical, multi-angle enclosure shall be made from plywood and finished with a black textured paint. Optional white and RAL colour finishes shall be available to special order. The enclosure shall be fitted with a pole-mount socket and M8 threaded inserts to accommodate eyebolt suspension and a wall bracket. The drivers shall be protected by a perforated steel grille with scrim cloth backing. Dimensions (W x H x D) shall be 324mm x 522mm x 289mm (12.8in x 20.6in x 11.4in). Weight shall be 14kg (30.9lbs). The loudspeaker shall be the Martin Audio Blackline X10. Features Compact passive two-way system Symmetrical multi-angle plywood enclosure User-rotatable 90° x 50° horn Vertical and horizontal orientation Screw-free, cloth-backed perforated steel grille Integral ergonomic handle Pole-mount bung maintains clean lines 8Ω nominal impedance Twin NL4 connectors Flexible mounting options via M8 inserts Applications Portable sound reinforcement Live music clubs Bars and restaurants Nightclubs Unobtrusive stage monitoring Corporate AV events and conferences Weddings and parties Main PA infill Secondary stages at festivals HoW, leisure centres and retail outlets TYPE Compact, passive two-way system FREQUENCY RESPONSE (5) 65Hz-20kHz ± 3dB, -10dB @ 55Hz DRIVER LF: 10” (250mm)/2.5” (63.5mm) voice coil, ferrite motor system HF: 1” (25mm) exit/1.4” (35mm) voice coil, polyimide dome compression driver RATED POWER (2) 250W AES, 1000W peak SENSITIVITY (8) 94dB MAXIMUM SPL (9) 118dB continuous, 124dB peak NOMINAL IMPEDANCE 8Ω DISPERSION (-6DB) 90° H x 50° V (user-rotatable) CROSSOVER 2.4kHz passive ENCLOSURE Multi-angle birch/poplar ply FINISH Black textured paint PROTECTIVE GRILLE Black perforated steel with scrim cloth backing CONNECTORS 2 x NL4 type PIN CONNECTIONS (INPUT) 1+/1- PIN CONNECTIONS (LINK) 1+/- to 1+/- FITTINGS 19 x M8 inserts, pole-mount socket, 1 x bar handle DIMENSIONS (W) 324mm x (H) 522mm x (D) 289mm (W) 12.8ins x (H) 20.6ins x (D) 11.4ins WEIGHT 14kg (30.9lbs) ACCESSORIES Wall bracket, eyebolts

Par JBL kompresionih drajvera 2" exit, dijafragme 8Ohm (D8R2446).U izvanrednom stanju, kao novi. Mogu se dobiti sa novim Aquaplas dijafragmama D8R2450SL u originalnom pakovanju uz doplatu 160Eur. Idealni za vlasnike Yuichi, TAD ili sličnih drvenih horni. Na poslednjoj slici je na izlaz svakog drajvera stavljena zaštita. Kontakt telefonom ili preko HO poruka. Zamena eventualno samo za Rotel pretpojačalo RC-1570, RC-1572, RC-1572MKII. Samo poziv.

Philips zvucnika sa vecim ribonima, detaljan brz, precizan zvuk, 4 inca 10cm ribon. Kostali oko 1000e, nagradjen model, What HiFi casopis 5 zvezdica ocenjen i 650 funti je tada tamo kostao u trenutku ocenjivanja.

Set zvučnika Onkyo LS 3200 2.1. Subwooferom se koristi bežično. Stereo zvučnici mogu se montirati na zid ili stojeći. Tehničke specifikacije možete pronaći na poslednjoj fotografiji ili na Internetu. U beloj boji, izgleda vrlo elegantno i, kao što se očekuje od Onkya, zvuči vrlo dobro.

Što se zvuka tiče kada sam ih priključio da proverim ispravnost, nisam bio siguran odakle tolika buka oko ovih zvučnika, nisu mi delovali ništa posebno. Onda sam skinuo uputstvo i pozicionirao ih prema uputstvima. Promena je bila neverovatna. Kakva promena, kakav zvuk. Bukvalno osvaja. Zvučnici su idealni za srednje prostorije kakva je moja u kojoj sam slušao (20 kvm). Sve se definisalo, sve se izrazilo, sve je bilo prelepo za slušanje. Sada mi je zaista jasno zašto ljudi toliko hvale ove zvučnike. Retko očuvani zvučnici, slobodno mogu reći da su "kao novi". Uz zvučnike idu originalni grilovi i nožice.

Vrhunske zvucne kutije Maestro C2 potpuno ispravne.

ASW Alpha - Top model, prava retkost u svetu. Svaka kutija 48 KG Visina - 144 cm Snaga - 250/400 watts Kao nove su koštale - 9,000€

pridajem zvucnike kef iq9 top model retkost naci ovaj model zvucnici su u dobrom stanju i potpuno ispravni nikad servisirani niti bilo sta moze da se pogleda i proba cena 850 evra. Specifications Type: 3 way, 4 driver loudspeaker system Frequency Response: 38Hz to 40kHz Recommended Amplifier: 15 to 200W Crossover Frequency: 250, 2800Hz Impedance: 8Ω Sensitivity: 91dB Bass: 2 x 165mm cone Midrange: 1 x 165mm cone Tweeter: 1 x 19mm dome Enclosure: bass reflex Dimensions: 942 x 220 x 327mm

jajne podnostojeće kutije iz zlatnog doba HiFi-a. Odlično projektovani i utegnuti kabineti sa neverovatnim bassom. U početku smo sumnjali da je još 1 drajver u kutiji, ali sumnje su bile neopravdane. Visoki tonovi su detaljni, ali bez šumova i prilično neutralni. Skretnica je dvoslojna, rekao bih pažljivo projektovana sa velikim brojem kvalitetnih elemenata. Zanimljiva i široka zvučna slika! ! Ovaj model je bio top kada se pojavio. Prvi sam vlasnik, posedujem kutije za pakovanje, damping sunđere za bassreflexe. Kabineti su pre nekoliko godina osveženi crnim bajcom, što ih je 'ponovilo'. Pogledajte ocene korisnika i cene na fotografiji br.5! PERFORMANCE Recommended amplifier power : 10 - 90 Watts RMS Continuous power handling : 60 Watts RMS Sensitivity : 89dB (2.8Volts @ 1 metre) Nominal impedance : 8 ohms Frequency response : 35Hz - 20kHz +/- 3dB DRIVE UNITS High frequency : 25mm (1") soft dome Low frequency : 165mm (6.5") coated paper con

Featuring a 12” (300mm) LF drivers and a 1” (25mm) exit compression driver on an 80° x 50° rotatable horn, it is ideal for small to mid-size indoor venues requiring class-leading sound from a compact enclosure. The LF driver has a 2.5” (65mm) voice coil and powerful magnet system for the tightest bass response, while the HF compression driver utilises a 1.75” (44mm) polyimide diaphragm for extended high-frequency response without distortion. An onboard Class D amplifier module delivers 1000W LF + 300W HF peak output to the drivers and sophisticated DSP functions are controlled by a rotary interface and multi- function, easy-to-use colour screen on the rear panel. DSP features include crossover function, a three-channel mixer with three-band EQ on each input channel and selection of three voicing presets and operating modes for flexible usage without external processing. The LF and HF drivers are independently protected by RMS and peak limiters for longevity and consistency of performance. The XP12 is road-ready. Constructed from durable plywood, it is fitted with a cloth-backed steel grille to protect the drivers from damage and dust ingress, while not impeding airflow at low frequencies. The enclosure has M8 inserts for eyebolt suspension and a pole-mount socket with a removable cap that maintains clean lines for install applications. It is finished in black textured hard-wearing paint as standard. ACOUSTICS TYPE Compact self-powered two-way system FREQUENCY RESPONSE (5) 62Hz – 20kHz ±3dB, -10dB @ 50Hz DRIVERS LF: 12” (300mm)/2.5” (63.5mm) voice coil, ferrite motor system HF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome compression driver MAXIMUM SPL (9) 122dB continuous, 128dB peak DISPERSION (-6DB) 80° H x 50° V (user-rotatable) CROSSOVER 2.3kHz active, 24dB/octave MODULE AUDIO IN/OUT INPUT CONNECTORS 2 x female XLR/ 1⁄4” jack combo MIC/LINE INPUT IMPEDANCE 8 kΩ balanced 1⁄4” JACK TS INPUT IMPEDANCE 1 MΩ unbalanced MIX OUTPUT CONNECTOR 1 x male XLR MIX OUTPUT IMPEDANCE 600Ω balanced INTERNAL PROCESSING INPUT CHANNEL EQ 3-band on each channel plus HPF (Ch1/2) SPEAKER EQ 3 speaker mode/voicing presets PROTECTION LF and HF Peak and RMS limiting, amplifier thermal protection AMPLIFIER MODULE TYPE 2 channel switch-mode, class D PEAK OUTPUT POWER 1300W total 1000W LF, 300W HF AVERAGE EFFICIENCY 89% COOLING External convection cooled MAXIMUM AMBIENT TEMPERATURE 35°C (95°F) for full output POWER SUPPLY TYPE Switch-mode, fixed frequency with PFC AC INPUT OPERATING RANGE 100-240V ~ AC, 50 - 60Hz POWER FACTOR > 0.98 NOMINAL POWER CONSUMPTION 550W Max MAINS CONNECTOR 3-pin IEC MECHANICAL ENCLOSURE Multi-angle birch/poplar ply FINISH Black textured paint PROTECTIVE GRILLE Black perforated steel with scrim cloth backing FITTINGS 17 x M8 inserts, pole-mount socket, 2 x pocket handle DIMENSIONS (W) 358mm x (H) 574mm x (D) 318mm (W) 14.1in x (H) 22.6in x (D) 12.5in WEIGHT 18kg (40lbs) Martin Audio XP12 The loudspeaker shall be a self-powered two-way system. Its transducers shall consist of a reflex-loaded 12” low frequency driver and a 1” exit high frequency compression driver mounted on a high frequency horn. The horn shall be user-rotatable to enable vertical, horizontal and stage monitor operation. Horizontal dispersion shall be 80° and vertical dispersion shall be 50°. The on-axis frequency response shall be 62Hz-20kHz +/- 3dB and the loudspeaker shall produce a maximum SPL of 128dB peak at 1 metre. The loudspeaker shall incorporate a two-channel Class D amplifier which shall deliver a total of 1300W peak output to the transducers. Onboard DSP shall perform crossover and limiter functions and incorporate a three-channel mixer. Mixer settings, operating mode and voicing presets shall be effected by a rotary encoder and display screen on the rear panel. Bluetooth control and streaming shall be available as on option. The power supply shall employ Power Factor Correction and operate from 100-240V, 50-60Hz AC. Audio input connectors shall be female XLR type combined with a ¼” jack. The mix output shall be available on a male XLR type connector. The AC power connector shall be a 3-pin IEC connector. The loudspeaker enclosure shall be constructed from multi-laminate plywood with a black textured coating and be fitted with a pole-mount socket, pocket handles and M8 threaded inserts for mounting accessories. The drivers shall be protected by a perforated steel grille with a cloth backing. Dimensions (W x H x D) shall be 358mm x 574mm x 318mm (14.1in x 22.6in x 12.5in). Weight shall be 18kg (40lbs). The loudspeaker shall be the Martin Audio XP12.

Features Compact passive two-way system Symmetrical multi-angle plywood enclosure User-rotatable 80° x 50° horn Vertical and horizontal orientation Screw-free, cloth-backed perforated steel grille Integral ergonomic handle Pole-mount bung maintains clean lines 8Ω nominal impedance Twin NL4 connectors Flexible mounting options via M8 inserts Applications Portable sound reinforcement Live music clubs Bars and restaurants Nightclubs Unobtrusive stage monitoring Corporate AV events and conferences Weddings and parties Main PA infill Secondary stages at festivals HoW, leisure centres and retail outlets SPECIFICATION TYPE Compact, passive two-way system FREQUENCY RESPONSE (5) 62Hz-20kHz ± 3dB, -10dB @ 50Hz DRIVER LF: 12” (300mm)/2.5” (63.5mm) voice coil, ferrite motor system HF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome compression driver RATED POWER (2) 300W AES, 1200W peak RECOMMENDED AMPLIFIER MA2.0, MA3.0, MA5.0Q SENSITIVITY (8) 97dB MAXIMUM SPL (9) 122dB continuous, 128dB peak NOMINAL IMPEDANCE 8Ω DISPERSION (-6dB) 80° H x 50° V (user-rotatable) CROSSOVER 2.3kHz passive ENCLOSURE Multi-angle birch/poplar ply FINISH Black textured paint PROTECTIVE GRILLE Black perforated steel with scrim cloth backing CONNECTORS 2 x NL4 type PIN CONNECTIONS (INPUT) 1+/1- PIN CONNECTIONS (LINK) 1+/- to 1+/- FITTINGS 20 x M8 inserts, pole-mount socket, 1 x bar handle DIMENSIONS (W) 358mm x (H) 574mm x (D) 337mm (W) 14.1ins x (H) 22.6ins x (D) 13.7ins WEIGHT 17kg (37.5lbs) ACCESSORIES Wall bracket, eyebolts

Compact line array integrated system 600W + 400W RMS, 129 dB SPL Created as a no-compromise choice for both live performers and installers, the VERTUS CS1000 compact line array combines maximum performance with a modular, scalable approach. Its lightweight but sturdy construction blended with FBT’s distinctive engineering and elegance has delivered a system that can be deployed on stage within minutes, or discreetly integrated into the most delicate of decors to provide high-quality sound and controlled directivity. A bi-amplified design, the system comprises a long excursion 12” bass reflex subwoofer and a passive mounted satellite, linked via a Neutrik SPEAKON connector and equipped with six full-range neodymium 3” drivers. Onboard the subwoofer is a Class-D, two channel amplifier, complete with switch-mode power supply, delivering 600W RMS to the subwoofer and 400W RMS to the satellite, both of which are housed in birch plywood enclosures. For ease of use, a storage compartment is provided within the subwoofer enclosure to securely house both the satellite speaker and its supplied mounting pole for storage and transport. A dedicated locking system holds all of the equipment in place. As with all FBT products, graceful but effective engineering is at the heart of the VERTUS CS1000, as exemplified by the mounting pole. Comprised of three sections, the pole allows users to alter the height of the satellite to suit their requirements, while a custom joint provides continuous vertical adjustment to ensure precise coverage in every venue. No listener is left untouched by the VERTUS CS1000 – the slim proportions of the satellite facilitate a wide horizontal dispersion of 110°, while the precision placement of the six 3” drivers to form a J-array creates a vertical dispersion of 30° (+10° / -20°). Need more power? The VERTUS CS1000 takes a modular approach in that two systems can be used in a dual configuration to form a totally coherent and much more powerful solution. By stacking the two subwoofers and locking the two satellites together end-to-end (via optional hardware), the maximum SPL of the overall system is raised by 6dB. Coverage is also extended – although the horizontal dispersion remains consistent, vertical dispersion increases to 40° (+20° / -20°) Other features ensure ease of use and a rugged build quality. The subwoofer is equipped with aluminum handles complete with a rubber insert to guarantee a comfortable grip – transporting the entire system, including the subwoofer, satellite, mounting pole, joint and all cables, is both convenient and comfortable. The fanless amplifier module is protected by diecast aluminum, while onboard DSP offers a choice of eight dedicated presets, each one shaped by FBT’s long experience in creating proprietary algorithms to suit every requirement. KEY FEATURES 2-way speaker system Subwoofer with a custom 12" (320mm) long excursion speaker with a 2.5" (64mm) voice coil 6 x full-range, 3" (70mm) neodymium high efficiency custom woofers with 0.75" (20mm) voice coils Frequency response of 40Hz to 20KHz Onboard Class-D, switch-mode amplifier delivering 600Wrms + 400Wrms for LF and HF respectively Built-in DSP with eight presets to suit every application Variable volume between -4.5 / + 5 dB in 8 steps Control Panel with master volume, presets, satellite volume, HPF, and LED status Input and link via XLR and Neutrik SPEAKON for satellite connection Dispersion 110 ° (H) x 30 ° (V) Modular design allowing two systems to be configured as one single solution via optional accessories Bass reflex stackable subwoofer in a birch plywood enclosure with die-cast aluminium handle and rubber inserts, plus M20 support and a custom pole-mount solution facilitating adjustable height and vertical aiming The satellite and pole are fully integrated into the subwoofer cabinet, where a push button system locks the satellite in place for transportation The satellite is equipped with a coupling system for accessories which allow the extension of the length of the line array, positioning one atop the other. Alternatively, the same system allows the satellite to be permanently wall-mounted. Ideal for both live applications and fixed installations Easily expandable to a total power of 8.000W peak (via a stereo system consisting of 4 x VERTUS CS1000, positioned two per side) Configuration: 2 Way Frequency response: 40Hz - 20kHz Low frequency woofer: 12" High frequency driver: 6x 3" Maximum SPL cont/peak: 129 dB Dispersion: 110 x 30 Input impedance: 22kOhm Crossover frequency: 180Hz Input connector: XLR Net Dimension (WxHxD): Satellite - 105 x 530 x 120mm, Subwoofer - 565 x 373 x 450mm Net Weight: 30kg Transport Dimension (WxHxD): 695 x 473 x 580mm Transport Weight: 34kg AC Power requirements: 640VA Built-in amplifier LF/HF: 1000w (600w LF + 400w HF) Built-in amplifier peak LF/HF: 2000w (1200w LF + 800w HF) Power cord: 5m IEC

The rear panel offers two combo XLR-1/4" inputs and two XLR through outputs for connecting to other speakers and subwoofers. Quick DSP adjustments are available and include three modes: Boost, Extended LF, and Normal. Additionally, there are three preset crossover settings including 80, 100, and 120 Hz. The phase switch offers a choice of 0 or 180° to prevent multiple subwoofers from cancelling each other's low frequencies. The Pioneer XPRS1152S ships with an IEC power cord. Powerful Class-D Amplification The XPRS2 Series employs Class-D Amplification with high output wattage for a powerful and premiere audio experience for performers and listeners alike. The XPRS1152S subwoofer offers Class-D 4000 W amplification. High Quality, Robust Build Pioneer DJ's all-new XPRS2 Series features a sleek all-black, protective plywood cabinet for performance in harsh indoor and outdoor environments. The series models all come with a durable handle to support system portability and handling during setup and take down. The XPRS2 Series also features rubber feet to create separation and shock absorption between surfaces. Three DSP Modes XPRS2 subwoofers contain three different DSP preset modes: Boost, Extended LF, and Normal to suit different listening environments. Accurate Audio Performance The XPRS1152S employs a 15" ferrite woofer with a 3" voice coil with long excursion to produce low frequencies with paramount accuracy. Frequency Response As with the XPRS2 full-range speakers, the new XPRS2 subwoofers' performance is apparent through both the frequency response and maximum SPL. With the XPRS1152S providing a frequency response of 45 to 120 Hz and a maximum SPL of 129 dB, the subwoofer packs in the performance of a permanent install subwoofer with the compact mobility required by today's mobile artists, performers, and venues. Pioneer DJ XPRS1152S Specs Configuration Active Subwoofer Enclosure Type Bass-Reflex Subwoofer Total Power Capacity 4000 W Peak 2000 W Program 1000 W RMS Amplifier Class Class-D Drivers MF Driver None LF Driver 1 x 15" / 38.1 cm Woofer LF Voice Coil 3" / 76.2 mm Magnet Ferrite Performance Frequency Response 45 Hz to 120 Hz -6 dB Maximum SPL 129 dB Protections Short Circuit, Thermal Connectivity Audio I/O 2 x Combo XLR-1/4" 3-Pin Female Balanced/Unbalanced Line Input 2 x XLR 3-Pin Balanced Line Thru/Output Network I/O None USB None Wireless Connectivity None Signal Processing Crossover 80 to 120 Hz Dynamic Processing Compression, Peak Limiter Phase Adjustment -180° Digital Signal Processing Venue Settings Power AC Input Power 110 to 240 VAC, 50 / 60 Hz (T 10 A L 250 V) AC Power I/O 1 x IEC Input Power Consumption 800 W Physical Mounting 1 x Pole Socket (Top) Handles 1 x Each Side Cooling Fan (Variable Speed) Construction Material Plywood Dimensions 22.8 x 19.8 x 17.7" / 579.1 x 502.9 x 449.6 mm Weight 57.9 lb / 26.3 kg

Martin Audio Blackline X8 The loudspeaker shall be a passive, two-way system. Its transducers shall consist of a reflex-loaded 8” low frequency driver and a 1” diaphragm/1” exit compression driver mounted on a high frequency horn which shall be user-rotatable to enable vertical or horizontal orientation of the enclosure. Horizontal dispersion shall be 90° and vertical dispersion shall be 50°. The on-axis frequency response shall be 70Hz-20kHz +/- 3dB and the loudspeaker shall produce a maximum SPL of 121dB peak calculated at 1 metre. Power handling shall be 200W AES, 800W peak. Rated impedance shall be 8 ohms. The rear connector panel shall be fitted with two NL4 type connectors. Low and high frequency sections shall be integrated by an internal 2.9kHz passive network. For optimal performance the loudspeaker shall be operated in conjunction with a dedicated electronic controller. The symmetrical, multi-angle enclosure shall be made from plywood and finished with a black textured paint. Optional white and RAL colour finishes shall be available to special order. The enclosure shall be fitted with a pole-mount socket and M8 threaded inserts to accommodate eyebolt suspension and a wall bracket. The drivers shall be protected by a perforated steel grille with scrim cloth backing. Dimensions (W x H x D) shall be 257mm x 422mm x 243mm (10.1in x 16.6in x 9.6in). Weight shall be 8kg (17.6lbs). The loudspeaker shall be the Martin Audio Blackline X8. Features Ultra-Compact passive two-way system Symmetrical multi-angle plywood enclosure User-rotatable 90° x 50° horn Vertical and horizontal orientation Screw-free, cloth-backed perforated steel grille Integral ergonomic handle Pole-mount bung maintains clean lines 8Ω nominal impedance Twin NL4 connectors Flexible mounting options via M8 inserts Applications Portable sound reinforcement Live music clubs Bars and restaurants Nightclubs Unobtrusive stage monitoring Corporate AV events and conferences Weddings and parties Main PA infill Secondary stages at festivals HoW, leisure centres and retail outlets TYPE Ultra-Compact, passive two-way system FREQUENCY RESPONSE (5) 70Hz-20kHz ± 3dB, -10dB @ 60Hz DRIVER LF: 8” (200mm)/2” (50mm) voice coil, ferrite motor system HF: 1” (25mm) exit/1” (25mm) voice coil, polyimide dome compression driver RATED POWER (2) 200W AES, 800W peak SENSITIVITY (8) 92dB MAXIMUM SPL (9) 115dB continuous, 121dB peak NOMINAL IMPEDANCE 8Ω DISPERSION (-6DB) 90° H x 50° V (user-rotatable) CROSSOVER 2.9kHz passive ENCLOSURE Multi-angle birch/poplar ply FINISH Black textured paint PROTECTIVE GRILLE Black perforated steel with scrim cloth backing CONNECTORS 2 x NL4 type PIN CONNECTIONS (INPUT) 1+/1- PIN CONNECTIONS (LINK) 1+/- to 1+/- FITTINGS 13 x M8, 6 x M6 inserts, pole-mount socket, 1 x pocket handle DIMENSIONS (W) 257mm x (H) 422mm x (D) 243mm (W) 10.1ins x (H) 16.6ins x (D) 9.6ins WEIGHT 8kg (17.6lbs) ACCESSORIES Wall bracket, eyebolts

VENTIS Presets The FBT VENTIS range offers powerful DSP with 6 versatile presets. Crafted by expert FBT engineers, the presets offer a performance for every requirement. ORIGINAL / LIVE The renowned, smooth FBT sound VOCAL A special EQ setting to maximise speech intelligibility DJ Designed to keep the energy high and your audience dancing TOURING The reliability and the roar of the industry’s most popular touring systems LOUDNESS The ultimate preset for listening at a medium or low volume WARM A special setting to emphasise full-bodied, low-mid frequencies. KEY FEATURES 2-way, bi-amplified, bass reflex design Biamped: 700W RMS LF and 200W RMS HF power amplifiers in Class D for LF and in Class H/AB for HF Digital Signal Processor with graphic display 15 mm (0.59") birch plywood scratch resistant enclosure and internal bracing High efficiency switch mode power supply Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push 380mm (15") LF woofer with 64mm (2.5") voice coil, custom made for FBT 25mm (1") exit throat B&C HF compression driver with 44mm (1.7") voice coil Frequency response from 42Hz to 20KHz 80°H x 50°V Constant Directivity rotatable Horn 6 x M10 suspension points, wall bracket mount thread, 35 mm (1 3/8") top-hat speaker stand socket, two aluminium handles 45° monitor taper Adjustable delay between 0 - 10m Weight : 25Kg Dimensions : 427 x 765 x 420mm Configuration: 2 Way Frequency response: 42Hz - 20kHz -6dB Low frequency woofer: 15 High frequency driver: 1 Input impedance: 22kOhm Input connector: XLR/Jack Combo socket with XLR link out, RCA stereo input Net Dimension (WxHxD): 427 x 765 x 420mm Net Weight: 25kg Transport Dimension (WxHxD): 600 x 865 x 520mm Transport Weight: 29kg AC Power requirements: 640VA Power cord: 5m Built in amplifier: 900w (700w LF + 200w HF) Built in amplifier peak: 1800w (1400w LF + 400w HF) Maximum SPL continuous/peak: 127/133dB Dispersion (HxV): 80? x 50? rotatable

TYPE Ultra-compact, two-way passive FREQUENCY RESPONSE (5) 70Hz-20kHz ± 3dB -10dB @ 55Hz DRIVERS 8” (200mm)/2” (50mm) voice coil LF driver 1” (25mm) exit HF compression driver RATED POWER (2) 150W AES, 600W peak RECOMMENDED AMPLIFIER MA2.8Q SENSITIVITY (6) 93dB MAXIMUM SPL (9) 115dB continuous, 121dB peak NOMINAL IMPEDANCE 8 ohms DISPERSION (-6dB) 90 ̊ horizontal, 50 ̊ vertical CROSSOVER 2.5kHz passive ENCLOSURE 17 litre, multi-laminate birch ply FINISH Textured black paint PROTECTIVE GRILLE Black perforated steel CONNECTORS 2 x Neutrik NL4 PIN CONNECTIONS FR+,- : 1+,1- , Link thro': 2+,2- FITTINGS 10 x M8, 4 x M6 threaded inserts 1 x mounting pole socket 1 x pocket handle DIMENSIONS (W) 299mm x (H) 435mm x (D) 269mm (W) 11.8ins x (H) 17.1ins x (D) 10.6ins WEIGHT 12kg (26lbs)