USB I/O Schematic Diagram USB-I/O Specifications Connector USB type B port Codec 24 bit, High Resolution Input Impedance 10 KOhms Transformer Balanced Output Impedance 300 Ohms Transformer Balanced Maximum Input Level Nominal 0 dB Maximum Output Level Nominal 0 dB Input/Output Noise USB - System dependent ISO transformer - Enviroment sensitive Frequency Response 20 - 20 KHz ± 0.5 dB Power Operating current via USB Port 80mA Input Connectors 2 x Female XLR, wired Pin 2 + Hot, Pin 3 – Cold. Pin 1 via ground Lift switch Output Connectors 2 x Male XLR, wired Pin 2 + Hot, Pin 3 – Cold. Pin 1 via ground Lift switch Construction All-steel polyurethane coated chassis, fibreglass PCB, epoxy printing, slip-resistant rubber base. Package includes a premium quality USB-A to USB-B cable System Requirements Windows PC running Windows XP, 7/8/10 , Mac running OS X or later USB port Audio software installed 98SE will need the Win 98SE CD Rom to install driver. However, in reality if you're serious about music you'll already be using a later operating system

Specs Inputs Input 1/2 connectors: XLR/TRS combo jacks (XLR: 2 hot / TRS: TIP hot) Input gain: 0 to 60dB in 1dB steps Input impedance: 5kΩ (1 MΩ (when Hi-Z ON) Maximum input level: +12 dBu (@0dBFs) Phantom power: +48V L/R Output Type: ¼" TRS jack (Balanced) Maximum output level: +14 dBu (@0dBFs) Output impedance: 100Ω Phones Output Type: ¼" stereo phone jack 20mW + 20mW (into 32Ω load) Maximum output level: +8 dBu (@0dBFs) Output impedance: 33Ω Dynamic range A/D: 118dB typical (IHF-A) D/A: 120dB typical (IHF-A) Number of audio channels Recording: 2 Playback: 2 OTHER Frequency characteristics: -1.0 dB: 20 Hz - 60 kHz @ 192kHz -1.0 dB: 20 Hz - 40 kHz @ 96kHz -1.0 dB: 20 Hz - 20 kHz @ 44.1kHz Measured conversion noise (EIN): -125dBu (IHF-A) @ 60dB, 150Ω input Sampling frequencies: 192kHz, 176.4kHz, 96kHz, 88.2kHz, 48kHz, 44.1kHz Bit depth: 24-bit Interface: USB 3.0 MIDI In/Out: 5-pin DIN jack Power source: USB 3.0 Bus Power / AD-14 AC adapter (DC 5V 1A) Power consumption: 5 W maximum Dimensions: 113.9mm(D) x 176.0mm(W) x 46.2mm (H) Weight: 750g *0dBm＝0.775Vrms Live performance Now you can get the best out of your laptop at every gig. The UAC-2 is portable, bus-powered (no AC connection required), and built rugged for the road, plus its advanced converters and support for USB 3.0 SuperSpeed ensures superior audio wherever your music takes you. Webcasting, podcasting, gaming, and live-streaming Broadcast your creativity, enhance your gaming experience, and share your performance with the world. The UAC-2's Loopback function combines the input from connected mics, instruments, and line-level devices along with background music or other audio tracks being played back by your computer and then instantly routes a custom blend of the signals to your streaming software. Recording and archiving Pair a UAC-2 with your DAW and create great audio in any recording environment. Connect a wide variety of microphones, line-level devices, and instruments. Use Direct Monitoring for zero-latency overdubbing. Sync your MIDI controllers, sound modules, and drum machines. Archive your favorite recordings in high-resolution formats. The UAC-2 provides everything you need, in one compact device. Desktop audio enhancement Think your headphones and speakers already sound pretty great? Treat yourself by plugging them into the UAC-2 instead of your computer's audio outputs. Now you can enjoy the ultimate in streamed high-resolution audio—all the way up to 24-bit/192 kHz—in full fidelity. Complete connectivity The UAC-2 works with everything from legacy USB 2.0 laptops and desktops, all the way up to the latest-generation Mac or Windows USB 3.0-equipped computers. Or plug in an AC adapter and Apple Camera Connection kit or Lightning to USB Camera Adapter (sold separately) and use it with your iPad. MIDI The UAC-2's MIDI input and output connectors ensure rock-solid synchronization between your computer and devices such as electronic keyboards, controllers, drum machines, and synthesizer or sampler modules. USB 3.0 SuperSpeed The USB 3.0 SuperSpeed transfer protocol supported by the UAC-2 is ten times faster than USB 2.0 and six times faster than FireWire 800. The result? Low-latency (2.2ms roundtrip @ 96 kHz/32 samples) for improved performance from your DAW software, and a stable data stream that is unaffected by computer jitter (slight variations in timing), so there's no need to connect an external master clock source. What's more, the extra bus voltage carried by USB 3.0 (900 mA, as opposed to the 500 mA carried by USB 2.0) allows for the use of higher-end electronic components such as the advanced preamps and converters in the UAC-2. The Hardware The USB 3.0 connector on the rear panel carries digital signal to and from your computer in addition to providing power to the UAC-2—no batteries or external power required. Dual front panel combo XLR/TRS inputs allow you to connect a wide variety of microphones as well as line-level signals from electronic keyboards and music players—even passive instruments such as electric guitars and basses. Dual-balanced TRS output jacks enable you to connect the UAC-2 to amplifiers or self-powered speakers, and there's an independent ¼" stereo headphone jack with dedicated volume control for private monitoring of the input or output signal. Dedicated input gain controls and Clip LEDs make it easy to set optimum input levels, and a large Output knob enables fast control over overall output level. A phantom power switch applies +48 volts to the mic inputs, allowing you to use the UAC-2 with studio-quality condenser microphones, and a three-way Direct Monitoring switch enables monitoring of input signal with zero latency in both mono and stereo. MIDI In and Out connectors allow interfacing with devices such as electronic keyboards and drum machines. Last but not least, a Class Compliant Mode switch enables the UAC-2 to be connected to an iPad.* * Optional power adapter and Apple Camera Connection kit or Lightning to USB Camera Adapter required Upsampling The UAC-2 uses high-end components such as the Burr Brown PCM4202 analog-to-digital converter and AKM AK4396 digital-to-analog converter. In addition, the UAC-2 performs 4-times upsampling during both analog-to-digital (A/D) and digital-to-analog (D/A) conversion. In other words, when the sampling frequency is set to 44.1 kHz or 48 kHz, the UAC-2 processes the signal at high resolution 176.4 kHz or 192 kHz. For A/D conversion, this means less aliasing noise; for D/A conversion, this means increased clarity and fidelity. Extend your capabilities with software UAC-2 MixEfx is a free Macintosh and Windows compatible application designed specially by Zoom for the UAC-2. With UAC-2 MixEfx, you can set mix parameters and add high-quality effects such as reverb and echo. Other features include a low cut filter, phase reverse, AUTO GAIN control for each input. UAC-2 MixEfx even has three memory slots for saving user settings with quick recall. Features at a glance 2-in/2-out USB 3.0 SuperSpeed audio interface Support for recording and playback up to 24-bit/192 kHz Loopback function for webcasting, podcasting, gaming, and other live streaming applications Low latency overdubbing and direct monitoring for zero-latency monitoring in mono or stereo Two combo balanced XLR/TRS input connectors accept both mic- and line-level signal Hi-Z switches allow direct connection of electric guitar or bass Switchable +48V phantom power Two balanced TRS output jacks for connection to amplifiers or self-powered speakers ¼" headphone jack with dedicated level control Independent gain controls and clip LEDs for each input Large knob output volume control Direct Monitoring switch for zero latency monitoring in mono or stereo MIDI In and Out Compatible with all popular DAW and streaming software, including Cubase, Logic, Garage Band, Pro Tools, Ableton Live, and others High-performance mic preamps with up to +60dB of amplification 120dB of dynamic range 4x upsampling during A/D and D/A conversion for reduced noise and enhanced fidelity Asynchronous transfer system unaffected by computer jitter Bus powered—no AC power required Robust metal housing ensures roadworthiness Works with all USB 3.0-equipped computers and iPads* * Optional power adapter and Apple Camera Connection kit or Lightning to USB Camera Adapter required Accessories Here's what comes included with the UAC-2 Operation manual USB 3.0 cable (1m) Cubase LE download Cubase LE startup guide Optional accessories Zoom AD-14 AC adapter (DC 5V 1A)

Key Features 2-in / 3-out USB audio interfejs AKTIVNI/PASIVNI pick-up selektor PURE i JFET ulazi Z-Tone® kolo koje se prilagođava impedansi Izlaz za pojačalo sa prekidačem uzemljenja Mikrofonsko pretpojačalo Klase A visoke rezolucije 24-bit, 192 kHz kvalitet zvuka Široki frekvencijski odziv idealan za instrumente Najbolja u klasi analogna / digitalna konverzija Izuzetno nizak nivo šuma za snimanje visokih pojačanja Specifikacije Opšte AD i DA Rezolucija: 24-bit Brzina semplovanja: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz Host Povezivanje: USB Type-B receptacle. USB 2.0 (velike brzine). Linijski izlazi 1-2 (Monitor) Konfiguracija: Elektronski izbalansirana i lebdeća, automatski kompenzuje nivo kada je veza uravnotežena ili neuravnotežena. Izlazna impedansa: 150 Ohma uravnoteženo, 75 Ohma neuravnoteženo Izlazni nivo: 0 dBFS odgovara +13,5 dBu Frekventni odziv: od 1 Hz do 46 kHz unutar 0,5 dB (96 kHz sempl frekvencije) Dinamički opseg: 113 dB (A) THD @ -1 dBFS: 0.001% THD + N: -103 dB (A) na -1 dBFS Kanala 1-2 crosstalk: 112 dB(A) Izlaz 3 (izlaz za pojačalo) Konfiguracija: Neuravnotežena, plutajuća, sa podesivim podizanjem zemlje Izlazna impedansa: 75 Ohma Izlazni nivo: 0 dBFS odgovara -3 dBu Frekvencijski odziv: Od 20 Hz do 42 kHz u roku od 0,5 dB (96 kHz sempl frekvencije) Dinamički raspon: 106 dB (A) THD + N: -93 dB (A) Izlazi za slušalice Izlazna impedansa: Gotovo idealan izvor (nula Ohma) do klipinga Maksimalni izlazni nivo: +9 dBu na opterećenje od 50 Ohma (približno 95 mV) frekvencijski odziv: od 1 Hz do 42 kHz u roku od 0,5 dB (96 kHz sempl frekvencije) Dinamički raspon: 111 dB (A) THD + N: -102 dB (A) uaz za Instrument Konfiguracija: Višestruka topološka instrumenta Ulazna impedansa, PASIVNI način rada: Varira od 1 MOhms do 2,2 kOhms Ulazna impedansa, AKTIVNI režim: 10 kOhms Nivo ulaza, min pojačanje: 0 dBFS se dobija sa + 12.5dBu signalom na TS ulazu Nivo ulaza, maksimalno pojačanje: 0 dBFS se dobija sa -19 dBu signalom na TS ulazu Frekventni odziv: Od 6 Hz do 42 kHz u roku od 0,5 dB (96 kHz uzorak frekvencije) Dinamički opseg: 117 dB (A) THD, PURE mod: 0,002% (-1dBFS ulaz) THD, JFET mod: 0,5% Mikrofonski ulaz Konfiguracija: Class-A diskretno diferencijalno predpojačalo mikrofona, pin 2 vruće Ulazna impedansa: 4 kOhms diferencijal pin 2 hot Ulazna impedansa: 4 kOhms promenljivo Ulazni nivo, minimalna jačina: 0 dBFS dobija se uz pomoć +9 dBu signala na XLR ulazu Ulazni nivo, maksimalna jačina: 0 dBFS dobija se uz pomoć -44 dBu signala na XLR ulazu Frekvetni odziv: od 7 Hz do 32 kHz u okviru 0.5 dB (96 kHz brzina semplovanja) Dinamički opseg: 116 dB(A) THD+N: -104 dB(A) at -10 dBFS Linijski ulaz Konfiguracija: Class-A diskretni diferencijalni linijski risiver, tip hot Ulazna impedansa: 20 kOhms promenljivo Ulazni nivo, minimalna jačina: 0 dBFS dobija se uz pomoć +26 dBu signala na TRS ulazu Ulazni nivo maksimalna jačina: 0 dBFS dobija se uz pomoć -27 dBu signala na TRS ulazu Frekventni odziv: od 7 Hz do 32 kHz u okviru 0.5 dB (96 kHz brzina semplovanja) Dinamički opseg: 117 dB(A) THD+N: -104 dB(A) at -10 dBFS Povezivanje i kontrole Prednja strana Jedan 1/4 "ulazni priključak za instrument Dva analogna potenciometra za ulazni GAIN Dva 5 segmentna merača nivoa ulaza (vrha) Analogni potenciometri za kontrolu Z-tone Pick-up selektor (PASIVNI / AKTIVNI) Birač topologije predpojačanja (JFET / PURE) + 48V ​​fantomsko napajanje USB LEDS MIDI IN / OUT LED diode Taster za monitor Izlazni priključak za slušalice 1/4 " Glavni potenciometar za kontrolu glavnog izlaza Izlazni priključak 1/4 " Zadnja ploča MIDI I/O 5-pin DIN konektori B-Type USB socket za povezivanje sa kompjuterom (Mac/PC) 2 x 1/4" TRS spoljni izlazi za konektore 2 x 1/4" TRS Uravnoteženi linijski plutajući izlazi 1 Combo socket za mikrofonski i linijski ulaz (auto selecting) Paket uključuje AXE I/O SOLO USB A-Type to USB B-Type kablza povezivanje (1.5m/4.32ft) Dimenzije Veličina: 19.5cm x 19.5cm x 5.3cm Težina: 1.0kg

Pročitajte recenziju!!! High Quality 192kHz DAC with USB Audio Interface Dr. DAC prime simply has everything you need in order to listen to digital music with pristine audio quality on the road or at your home. Dr. DAC prime works with up to 24bit/192kHz and is not only equipped with both an optical (via the included miniplug-toslink adapter) and coaxial S/PDIF input but also with a full USB audio interface (up to 24bit/96kHz) for bit-perfect audio transfer. Optionally the incoming signal can be upsampled to 192kHz, using a TI SRC4382 high end sample rate converter. The actual analog output signal is generated by a TI PCM1796 DAC with 123dB(a) dynamic range, featuring a full differental output with 3 LME49860NA opamps (8 pin) which are conveniently placed on sockets. The built-in headphone amplifier provides 1/8" and 1/4" connectors. The line output volume can be adjusted or fixed to send out the maximum dynamic range. But Dr. DAC prime is much more: it provides line inputs (AKM AK5386 ADC with 110dB) as well as optical and coaxial S/PDIF inputs, allowing you to record your own signals with excellent audio quality. Dr. DAC prime works under Windows XP, Windows Vista, Windows 7 as well as Mac OS X even without the installation of any driver software - that's Plug & Play in perfection, it could not be more simple. In addition, we offer an ASIO 2.0 compatible driver as option for Windows XP, Vista & 7. Device Type digital to analog converter (and analog to digital converter) USB audio interface headphone amplifier Key Specifications and Features max. 24bit/192khz S/PDIF input: coaxial & optical combo receiver module - S/PDIF input => S/PDIF output bypass support - S/PDIF input => line & headphone output support - S/PDIF input => computer recording support max. 24bit/96khz bit-perfect S/PDIF output: coaxial & optical combo transmitter module - USB input => S/PDIF output support - AC-3/DTS non-PCM pass thru support (Windows Vista / 7) 24bit/192kHz upsampled S/PDIF output (optical & coaxial) - USB input => 192kHz S/PDIF output - coaxial input => 192kHz S/PDIF output - optical input => 192kHz S/PDIF output 2 3.5mm mini plug-toslink optical adpters bundled TI SRC4382 high-end combo sample rate converter: 32kHz ~ 192kHz input support S/PDIF & USB input bypass, 192kHz upsampling support with SRC4382 +-1ppm 24.576MHz TCXO for S/PDIF input Tenor TE7022L USB audio controller +-1ppm 12.000MHz TCXO for USB input to S/PDIF / I2S output 2 channel line input with RCA connectors - line input => line output & headphone output support - AKM AK5386 24bit/192kHz ADC (S/N ratio 110dB) - 1pc 8pin DIP opamp (S4580P) with socket 2 channel line output with RCA connectors - anti-pop circuit support - Triple opamp fully differential output: 3pcs 8pin DIP opamp (LME49860NA) with socket - TI / Burr Brown PCM1796 24bit/192kHz 123dB DAC stereo headphone output - 6.3mm / 1/4" headphone jack - 3.5mm / 1/8" headphone jack volume control gain knob - fixed line level output - FIX - variable line level output - VAR - high-quality analog volume potentiometer - aluminum cut volume knob line output switch for fixed (FIX) or variable (VAR) output volume source selection (USB-ANALOG-DIGITAL switch): 3 position toggle switch with LEDs (green) line output mute on/off switch (has no effect on headphone output) standby/power on switch - standby (red) - power on (blue) S/PDIF & USB input bypass / 192kHz upsampling: 2 position toggle switch multi-colored LED display - MUTE (red) - NO SIGNAL (orange) - NON-PCM (pure green) - PCM (pure green) - 192kHz upsampling (pure blue) DC 9V~12V wide range power input 12V / 1.5A DC adapter included ASIO 2.0 driver support for Windows XP, Vista & 7

Element 88 ima 8 analognih ulaza kroz 4 kombo XLR-1/4-inčna konektora, dok 8 izlaza dolaze sledećom preraspodelom: 2 balansirana XLR, dva balansirana 1/4"-na, i dva TRS 1/4-inčna stereo konektora za slušalice (dovoljno za dva seta zvučnika ili nezavisna stereo output-a, kao i dva potpuno nezavisna, snažna output-a za slušalice). Element serija donosi najbolju analog/digital, odnosno digital/analog konverziju koju Apogee nudi – a Apogee je lider u ovom domenu već 35 godina. Thunderbolt povezivost, i specifični drajver učiniće da latencija bude gotovo nepostojeća, toliko niska da čuva snagu komjuterskog procesora, koja će stajati na raspolaganju vašem DAW-u (digitalnoj audio radnoj stanici). 8 naprednih Stepped Gain pretpojačanja za mikrofone svojim kvalitetom i visokim performansama rade jednako dobar posao kao slična pretpojačala iz kategorije skupljih (samostojećih) pojačala, i „uhvatiće“ sve, od gromoglasnog seta bubnjeva do delikatnih trzaja žica akustične gitare. Apogee Control za Mac-a je izrazito podesiva softverska aplikacija, u kojoj je i dragoceni Essentials prozor. Apogee Control za iOS pruža kontrolu za MIC pre-amp, nivoe zvuka za slušalice i zvučnike – sve to preko WiFi konekcije, što je sjajna opcija za sve izvođače koji sami snimaju svoje sesije. Jedna on najinovativnijih funkcija Elementa 88 je DualPath workflow plag-in, koji omogućava funkcionisanje Apogee FX plag-inova kroz interni DSP hardver uređaja, prirodno i sa svakom vašom biranom digitalnom radnom audio stanicom. 16 IN x 16 OUT Audio I/O boks AD/DA konverzija za snimanje do 192kHz/24-bit DualPath link workflow za nultu latenciju snimanja sa Apogee FX plag-inovima (pokretanim iz DSP hardvera) 8 analognih ulaza za mikrofonska pretpojačala vrhunske klase, i izborno fantom-napajanje (48v) za mikrofone, instrumente ili line-nivelisane uređaje; 4 kombo ulaza; 4 XLR ulaza Gain: do 75 dB, i napredni Stepped Gain dizajn kola EIN: 129dB (un-weighted) @ 60dB, 150Ohm input Maksimalni ulazni nivo: +20dBu Ulazna impedansa: 3K Ohm Latencija: 1.41 ms (pun krug) na 96kHz A/D konverzija: Maksimalni ulaz/izlazni nivoi: na +4dB (ref/Mic): +20dBu, na -10dB: +6dBV Odziv (frekvencija) 10 Hz -20Khz: > +/-0.2dB (na 44.1Khz) Ulazna impedansa: 5 KOhm Rel. THD + N: -110dB (@ 96Khz) D/A konverzija: Maksimalni ulaz/izlazni nivoi (+4dBu ref): +20dBu, (-10dBV ref): +6dBV Izlazna (line) impedansa: 90 Ohm Odziv (frekvencija) 10Hz -20 Khz: > +/- 0.05dB (na 44.1Khz) Rel. THD+N : -114dB (@96Khz) Dinamički opseg: 123dB (A-weighted) Maksimalni izlazni nivo za slušalice: 560 mW into 30 Ohm, 90 mW into 600 Ohm Dinamički opseg (slušalice): 123dB (A-weighted) Optički ulazi & optički izlazi - podržani ADAT, SMUX & S/PDIF ADAT: 8 kanala 44.1-48 kHz na 1 Toslink konektoru SMUX: 4 kanala 88.2-96 kHz na 1 Toslink konektoru S/PDIF: 2 kanala, do 96 kHz na 1 Toslink konektoru Podržava Multi-Unit Thunderbolt – povežite bilo koja dva audio Elementa 88 I/O direktno na Thunderbolt portove na vašem računaru; Apogee Ensemble Thunderbolt ekspander Dimenzije: 35 cm x 14 cm x 4.5 cm; Težina: 1.6 kg Šta je u kutiji: Element 88, univerzalno napajanje sa standardnim IEC kablom s 3 pina, rack pričvršćivači sa šrafovima, uputstvo za upotrebu, garantni list

AXE I / O je profesionalni audio interfejs sa 2 ulaza i pet izlaza - i kontroler - dizajniran posebno za potrebe gitariste koji snima, pružajući najbolji kvalitet zvuka i moćne funkcije usmerene na pravljenje bržih, lakših snimaka i bolje nego ikad. AXE I / O nudi ekskluzivnu trostruku topologiju, potpuno diskretno ulazno kolo, sa PURE i JFET ulaznim fazama, kako bi se prešlo od prozirnog ka cevastom sa samo jednim prekidačem. Z-Tone® sklop za prilagođavanje impedansi koji čeka na patent u interakciji je s vašom gitarom da bi vam pružio ogroman opseg tonalne fleksibilnosti, što nikada ranije niste čuli. Plus AXE I / O uključuje namenski Amp Out, tako da možete obrađivati svoje snimke pravog gitarskog zvuka i pojačala bez potrebe za spoljnim plug-inovima (i bez potrebe da isključite postojeće veze!). Ovaj prigušeni zvuk takođe eliminiše uzemljene petlje, kako bi se održala maksimalna jačina pojačanja što je moguće tiše. AXE I / O se neprimetno integriše sa uključenim AmpliTube 4 Deluxe kako bi odabrali unapred podešene i kontrolne vrednosti preko prednjeg ulaznog dugmeta i omogućava vam da povežete papučice i prekidače da biste maksimalno iskoristili svoj virtuelni uređaj a da nikada ne skinete ruke sa ‘’sekire’’. Uključili smo čak i ugrađeni tjuner, tako da možete biti spremni za snimanje u trenutku kad inspiracija dođe. Svaki element AXE I / O je stvoren sa beskompromisnim kvalitetom i korisnošću u stvarnom svetu. To je interfejs za koji bismo voleli da imamo sve vreme. Zaista vrhunski audio interfejs za sve 117 dB dinamički opseg, frekvencijski odziv od 3 Hz - 32 kHz - to nisu specifikacije koje obično nalazite na ulazima instrumenta. Ali oni su neophodni za snimanje najtačnijih detalja vašeg izvođenja, za najbolje performanse vašeg instrumenta i za očuvanje čistog i transparentnog zvuka. AKS I / O nudi 2 Hi-Z prednja ¼ "ulaza za gitare i basove, 2 zadnja kombinovana ulaza sa fantomskom snagom za povezivanje mikrofona i instrumenata i jasnim prednjim meračima za praktično nadgledanje nivoa signala na ulazu kanala. Dva plutajuća izbalansirana izlaza, dva neuravnotežena i jedna plutajuća neuravnotežena pojačala i slušalice sa visokim naponom omogućavaju vam povezivanje monitora, mrežnog napajanja i slušalica, sa nezavisnom jačinom za oba. Za praćenje nulte latencije 24-bitna konverzija od 192 kHz i ultra-stabilan unutrašnji sat sa malim podrhtavanjem osiguravaju najveću vernost, bilo da snimate vokale, akustične instrumente, pojačanu gitaru ili samo direktan signal za upotrebu s AmpliTube. Karakteristike Povezivanja 2 ulaza i 5 izlaza (jedan izlaz za pojačalo sa niskim nivoom šuma) 2 mikrofonska ulaz ultra niskog nivoa šuma/balansirani ulaz Gitarski ulaz sa trostrukom topologijom sa Z-TONE® 2 balansirana izlaza za monitor / 2 linijska izlaza Izlaz za slušalice 2 potpuno konfigurabilna spoljna kontrolna ulaza MIDI ulaz/izlaz USB 2.0 komp Mac/PC Gitarski zvuk najbolji u klasi Premium studijski zvuk Mikrofonska pretpojačala visoke rezolucije klase A izuzetno niskog nivoa šuma Najbolja konverzija u klasi i vrhunski analogni dizajn Asinhroni USB zvuk, ultra niskog podrhtavanja prilikom konverzije za vrhunski kvalitet 117dB dinamički raspon Sadrži softver za kontrolu Brzina semplovanja do 192 kHz Uključuje 10 T-RackS vrhunskih plug-inova i Ableton Live 10 Lite Specifikacije Opšte Konverzija: 24-bit A/D, 24-bit D/A Brzina: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz Snaga: DC IN Povezivanje uređaja: USB B-Tip 2.0 Spoljni omotač: tanak metalni sloj Linijski izlazi 1-2 (Monitor) Konfiguracija: elektronski balansirana i plutajuća, automatski nadoknađuje nivo kada je povezivanje balansirano ili nebalansirano. Izlazna impedansa: 150 Ohms balansirano, 75 Ohms nebalansirano Izlazni nivo: 0 dBFS odgovara +21 dBu Frekventni odziv: od 3 Hz to 32 kHz u okviru 0.5 dB (96 kHz brzina semplovanja) Dinamički opseg: 116 dB(A) THD+N: -106 dB(A) pri -1 dBFS Kanala 1-2 crosstalk: 115 dB(A) LInijski izlazi 3-4 Konfiguracija: nebalansirana Izlazna impedansa: 75 Oma Izlazni nivo: 0 dBFS odgovara +16 dBu Frekventni odziv: od 3 Hz do 32 kHz u okviru 0.5 dB (96 kHz brzina semplovanja) Dinamički opseg: 115 dB(A) THD+N: -102 dB(A) Kanala 3-4 crosstalk: 112 dB(A) Izlaz 5 (Izlaz za pojačalo) Konfiguracija: nebalansirana, plutajuća, sa mogućnošću biranja ground lift-a Izlazna impedansa: 100 Ohms Izlazni nivo: 0 dBFS odgovara -6 dBu Frekventni odziv: od 10 Hz do 32 kHz u okviru 0.5 dB (96 kHz brzina semplovanja) Dinamički opseg: 110 dB(A) THD+N: -104 dB(A) Izlaz za slušalice Izlazna impedansa: Virtuelno idealni izvor (nula Ohms) do clipping-a Maksimalni izlazni nivo: +12 dBu u 50 Ohms (približno 180 mW) Frekventni odziv: od 3 Hz to 32 kHz u okviru 0.5 dB (96 kHz brzina semplovanja) Dinamički opseg: 112 dB(A) THD+N: -100 dB(A) Ulazi za mikrofon 1-2 Konfiguracija: diskretno diferencijalno mikrofonsko pretpojačalo Klase A, pin 2 hot Ulazna impedansa: 4 kOhms diferencijalno Ulazni nivo, minimalna jačina: 0 dBFS dobija se uz pomoć +12 dBu signala na XLR ulazu Ulazni nivo, maksimalna jačina: 0 dBFS dobija se uz pomoć -37 dBu signala na XLR ulazu Frekventni odziv: od 5 Hz do 32 kHz u okviru 0.5 dB (96 kHz brzina semplovanja) Dinamički opseg: 116 dB(A) THD+N: -106 dB(A) at -10 dBFS Linijski ulazi 1-2 Konfiguracija: diskretni diferencijalni linijski risiver klase A, tip hot Ulazna impedansa: 20 kOhms diferencijalno Ulazni nivo, minimalna jačina: 0 dBFS dobija se uz pomoć +26 dBu signala na TRS ulazu Ulazni nivo, maksimalna jačina: 0 dBFS dobija se uz pomoć -24 dBu signala na TRS ulazu Frekvennti odziv: od 5 Hz do 32 kHz u okviru 0.5 dB (96 kHz brzina semplovanja) Dinamički opseg: 116 dB(A) THD+N: -106 dB(A) pri -10 dBFS Instrument Inputs 1 Konfiguracija: pretpojačalo za instrument sa višestrukom topologijom Ulazna impedansa, PASSIVE mod: promenljivo od 1 MOhms do 2.2 kOhms Ulazna impedansa, ACTIVE mod: 10 kOhms Ulazni nivo, minimalna jačina: 0 dBFS dobija se uz pomoć +14 dBu signala na TS ulazu Ulazni nivo, maksimalna jačina: 0 dBFS se dobija uz pomoć -17 dBu signala na TS ulazu Frekventni odziv: od 3 Hz do 32 kHz u okviru 0.5 dB (96 kHz brzina semplovanja) Dinamički opseg: 117 dB(A) THD, PURE mod: 0.0015 % THD, JFET mod: 0.5 % Ulazi za instrument 2 Konfiguracija: Hi-Z pretpojačalo za instrument Ulazna impedansa: 1 MOhms Ulazni nivo, minimalna jačina: 0 dBFS dobija se uz pomoć +14 dBu signala na TS ulazu Ulazni nivo maksimalna jačina: 0 dBFS is obtained with a -17 dBu signal at the TS input Frekventni odziv: Od 3 Hz do 32 kHz u okviru 0.5 dB (96 kHz brzina semplovanja) Dinamički opseg: 117 dB(A) THD: 0.006% Paket uključuje AXE I/O USB A-Tip to USB B-tip kabl za povezivanje(1.5m/4.32ft) Napajanje DC Dimenzije Veličina: 23.8cm/9.37" x 21.1cm/8.31" x 5.3cm/2.09" Težina: 1.3kg/2.9lb

Ultra-flexible audio interface connects your instruments, mixer, etc. with your computer for recording and playback High-resolution 24-bit/96 kHz converters for high-end audio quality Ultra-low latency drivers for Windows XP and Mac OS X included Stereo Headphone output with dedicated Level control Dual high-bandwidth FireWire connectors for absolute flexibility Powered via FireWire bus or included power adapter for use with 4-pin FireWire PCs Powerful DAW software included (Ableton Live Lite 4 BEHRINGER Edition, Kristal, Audacity) Power and FireWire status LEDs on front panel Standard port for Kensington security lock provided High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany The ultra-compact FCA202 FireWire® audio interface is an ideal way for musicians to connect to their PC or Mac computers. Due to its small size and low-latency operation, the FCA202 is especially well suited for traveling musicians who record and edit compositions on laptop computers. Your Portal to the Digital Domain The FCA202 allows you to converse with your computer in a language it understands—digital. When you connect line-level devices, such as synthesizers or the outputs of an audio mixer to the FCA202, its 24-bit A/D (Analog to Digital) converters swing into action, turning the audio signal into digital data. Now your computer has something it can work with. You can record your performance and play back your masterpiece through a pair of studio monitors, which can be connected to the FCA202’s outputs, or you can listen using headphones. Getting Connected On the rear panel of FCA202, you’ll find two FireWire sockets, one for your computer, the other for an optional external drive. Inputs are 1/4" unbalanced jacks that accept a wide range of line-level devices. Outputs accept both balanced and unbalanced 1/4" connections. The headphones jack is conveniently located on the front panel, with its own dedicated volume control. The Technical Stuff The state-of-the-art FCA202 features high-resolution 24-bit A/D and D/A converters, supporting up to a 96 kHz sampling rate. Reliable Windows XP®, Windows Vista® (32-bit) and Mac OS® X drivers ensure low latency operation. Free Software The hot FCA202 package also comes ready to lay down serious tracks, courtesy of Ableton® Live Lite 4 BEHRINGER Edition music production software. Kristal and Audacity® are also included so you can edit and share songs to your heart’s content. Value Stop by your authorized BEHRINGER dealer today and join the digital revolution. With the super-affordable FCA202, you’ll get hot connectivity and the coolest sound around for your PC or Mac—and you can take it with you!

Auto radio SAL sa prednjim USB ulazom Slušanje muzike sa mobilnog uredaja i mogucnost telefoniranja preko Bluetooth veze Zvonjenje telefona preko zvucnika radija i prikaz broja na displeju Ima mogucnost rada sa folderima Kontrola plejera mobilnog uredaja Prikazuje vreme i u iskljucenom stanju U sklopu radija se dobija daljinski upravljac Brend SAL Snaga 4 x 45 W Audio formati MP3 / WMA Boja osvetljenja Plava Bluetooth Da Prikljucci 4 x RCA izlaz, ISO prikljucak CD plejer Ne Memorijski ulaz USB / SD / SDHC / MMC AUX ulaz 1 x 3.5 mm Daljinski upravljac Da Prednji panel Ne može se skinuti Radio FM, može se memorisati 18 stanica Auto radio SAL sa prednjim USB ulazom Slušanje muzike sa mobilnog uredaja i mogucnost telefoniranja preko Bluetooth veze Zvonjenje telefona preko zvucnika radija i prikaz broja na displeju Ima mogucnost rada sa folderima Kontrola plejera mobilnog uredaja Prikazuje vreme i u iskljucenom stanju U sklopu radija se dobija daljinski upravljac Brend SAL Snaga 4 x 45 W Audio formati MP3 / WMA Boja osvetljenja Plava Bluetooth Da Prikljucci 4 x RCA izlaz, ISO prikljucak CD plejer Ne Memorijski ulaz USB / SD / SDHC / MMC AUX ulaz 1 x 3.5 mm Daljinski upravljac Da Prednji panel Ne može se skinuti Radio FM, može se memorisati 18 stanica

KUPUJTE BEZBEDNO I KUPUJTE PROVERENO! POGLEDAJTE MOJE OCENE! SALJEM POSTEKSPRESOM i BEX-om SIROM SRBIJE! MOGUCE LICNO PREUZIMANJE I TESTIRANJE U INDJIJI I NOVOM SADU! Sound Blaster Audigy 2 ZS PCI zvucna kartica sa izlazom za 7.1 sistem i sa POZLACENIM konektorima. Model: SB0350 Creative Labs Sound Blaster Audigy 2ZS PCI internal sound card for PC`s SB O350 Odlicna PROFI zvucna kartica sa jasnim i jakim zvukom! Poseduje neverovatni kristalni zvuk kako u igrama tako i pri slusanju muzike, gledanju filmova itd. Kartica ima pregrst opcija za konfigurisanje. Radi na svim operativnim sistemima kao sto su: Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 (32 / 64-bit) Potpuno ispravna i testirana na Windows 7 64-bitnom sistermu kao sto i vidite sa slike. Radna garancija 30 dana. Karakteristike: Proizvođač : Creative Model : Audigy 2 ZS (SB0350) Kartica Čipset : Audigy 2 Izlaz : 8 (7.1) Sample rate : 192 KHz Digital audio : 24 -bit SNR : 108 dB Ulaz/Izlaz Priključci : Line-in, Mic-in, SPDIF-in, SPDIF-out, MIDI, CD/AUX-in, Firewire, Sound Blaster Audigy 2 ZS On-Board priključci Line razini out (prednji / strani / stražnji / središnji / subwoofer) Digitalni izlaz za 5,1 potporu (6-kanalni izlaz SPDIF na Creative digitalne zvučnike Linija u Mikrofon u FireWire ® (IEEE ® 1394) Govorni uređaj u Analogni / digitalni CD audio u 15-pinski MIDI / Joystick luka proširenje zaglavlja Unutarnja IEEE ® 1394 zaglavlju Audigy 2 ZS Unutarnji I / O diska AD_EXT proširenje zaglavlju Audigy 2 ZS Unutarnji I / O diska Spec: Complete Cinematic Surround Sound with DTS-ES and Dolby Digital EX Movies Multi-Environment audio -- up to four simultaneous environments processed in real time Exclusive Creative THX Setup Console provides accurate audio calibration for a precise speaker Superior quality 24-bit/192kHz audio, ultra-realistic game effects, and studio quality music settings The only available PC platform for Advanced Resolution 24-bit/96kHz 7.1 surround Superior quality 24-bit/192kHz audio, ultra-realistic game effects, and studio quality music settings Exclusive Creative THX Setup Console provides accurate audio calibration for a precise speaker The only available PC platform for Advanced Resolution 24-bit/96kHz 7.1 surround Multi-Environment audio -- up to four simultaneous environments processed in real time Complete Cinematic Surround Sound with DTS-ES and Dolby Digital EX Movies

Each of the two Antelope Discrete mic / line / Hi-Z preamps has its own phantom power and up to 65 dB of gain, so the interface is primed and ready for recording all sorts of microphones, instruments, or even line-level signals from outboard gear. Equipped with two independently adjustable headphone outputs and mirrored balanced/unbalanced monitor outs, the Zen Go Synergy Core can act as your home studio's hub for multiple sets of headphones, mixes, and monitor feeds. Its S/PDIF digital I/O ports are perfect for expanding your setup with digital gear such as external converters, and a secondary USB Type-C is provided, so you can charge your smartphone or tablet. Rise above the Sound You Know The Zen Go Synergy Core shrinks the gap in sound quality between artists with access to premium studios and home creators. The pristine sound is due to a combination of professional-grade AD/DA converters and Antelope Discrete ultralinear preamps that share circuits with legendary American and British consoles. The standout sonic quality of the device would not be possible without the main pillar of the Antelope Audio sound—the 64-bit AFC clocking technology from the company's high-end master clocks. It is employed in prestigious studios around the world and has been trusted with the scoring of Hollywood blockbusters. Full Production Pack, from the Get-Go Zen Go Synergy Core comes with 37 premium analog-modeled effects that will help you create stunning, sonically rich productions. Aside from the exclusive compressors, EQs, and preamps, the interface comes with 22 guitar amps and cabs, a guitar tuner, and a signature reverb that are all ready to be applied in real time to your tracking and mixing session. The Synergy Core effects processing allows you to stack up your chain with many effects instances while monitoring through the interface without fear of overloading. At any time, you can expand your effects collection by purchasing more classic go-to units, true rarities never before recreated in digital form, and 3rd party effects like Antares Auto-Tune Synergy. Create from Anywhere, Anytime Antelope Audio's first bus-powered interface is optimized for ultralow-latency recording, high-resolution playback, creative beatmaking, and podcasting from virtually anywhere. With just a USB Type-C cable (included), you can power the Zen Go Synergy Core from your computer and use it to its full potential without having to carry a dedicated power supply with you. The interface can also be powered with any USB Type-C charger if you are away from your computer and still want to use its core functionalities. Better Recording and Producing Workflow Every feature available to you in the interface's control panel has been added to improve the important aspects of your workflow. Since DAW monitoring inevitably adds latency, you can monitor directly through the interface to reduce delay to the absolute minimum. With the routing options, you can easily set up a near-zero latency mix and stack it with your favorite Synergy Core effects without fear of overloading the onboard platform. Dedicated signal metering is available for both input and output levels on the front-panel display and in the software control panel. Smart Connectivity in a Small Package The two XLR-1/4" combo input jacks give you the flexibility to choose between Antelope's Discrete mic preamps and line / Hi-Z inputs; they are easily configurable via the control panel. The two 1/4" TRS balanced outputs, mirrored with the stereo RCA output, allow you to send the signal from the professional-grade D/A converter to two separate sound systems. Use one for your main monitors and the other for a DJ mixer or any other sound system with RCA connectivity, whilst preserving sound integrity. Conversion and Clocking Class-leading AD/DA conversion with up to 127 dB of headroom Recording, mixing, and playback at up to 24-bit / 192 kHz Proprietary 64-bit Acoustically Focused Clocking (AFC) technology and Jitter Management algorithm delivering increased width, separation, and detail in musical performances Analog and Digital Connectivity Two Discrete ultralinear preamps with 65 dB of gain for studio-quality recordings; all work as microphone / line / Hi-Z inputs via XLR-1/4" combo jacks USB Type-C port carrying up to eight input and eight output channels in any popular DAW with custom macOS and Windows drivers Secondary USB Type-C port for charging your mobile device Stereo S/PDIF input and output for digital expansion Mirrored analog monitor outputs including one stereo output over RCA and one stereo output over balanced 1/4" TRS Two stereo headphone outputs with separate gain control Loopback Function for Streaming Send your monitoring mixes containing any signal source from the interface's inputs and OS/DAW return back into your computer's virtual inputs to easily set up online broadcasting. Session Recall For every individual recording scenario, you can save session files and create exact snapshots of your effects chains, so you can load them later without losing your progress. Workflow-Enhancing Features Bus-powered design requires no dedicated power source Direct hardware monitoring with Synergy Core effects processed in real time with imperceptible latency Simplified I/O routing with preconfigured settings, allowing immediate recording and playback Color LCD screen with crisp I/O metering Front panel with dedicated volume knob and buttons for level adjustment and hands-on control of core parameters Customizable presets complete with signal routing, level adjustments, mixer settings, and submixes Easily adjust the monitor mixes for the monitor output and split headphone mixes into individual cue and submixes while applying pan, reverb, and other effects, and stereo link 37 Real-Time Effects Collection of 37 Synergy Core effects modeled after classic and rare analog outboard gear, powered by the Synergy Core proprietary onboard platform, which uses DSP and one or more FPGA chips for real-time effects processing with imperceptible latency. BA-31: Germanium Mic Preamp Gyraf Gyratec IX: Dual tube mic preamp with high-pass filter Clear Q: Parametric EQ VEQ-1A: 2-band tube EQ VMEQ-5: 3-band tube midrange EQ VEQ-HLF: Tube 2-band high- and low-pass filters VCA160: VCA compressor/limiter Stay-Levin: Vari-Mu tube compressor FET-A76: FET compressor/limiting amplifier X903: VCA compressor/limiter PowerFFC: Feed-forward compressor Power Gate: Noise Gate Power EX: Expander Auraverb: Reverb A-Tuner: Guitar tuner Plexi 59 (UK): Tube guitar amp Bass SuperTube VR: Tube guitar amp Darkface 65 (US): Tube guitar amp Top30 (UK) Bright: Tube guitar amp Tweed Deluxe (US): Tube guitar amp Overange 120 (UK): Tube guitar amp BurnSphere (DE) Lead: Tube guitar amp Marcus II (US) Lead: Tube guitar amp Modern (US) CH3: Tube guitar amp Rock 75 (UK): Tube guitar amp Rock 22.10 (UK): Tube guitar amp Darkface 65 2x12: Guitar cabinet Top30 2x12: Guitar cabinet Modern 4x12: Guitar cabinet Green 2x12: Guitar cabinet Vintage 4x12: Guitar cabinet Green 4x12: Guitar cabinet Caliper 50 1x10: Guitar cabinet Bluelux 1x12: Guitar cabinet Clst 1x12: Guitar cabinet England 4x12: Guitar cabinet Bass Tube 1x15: Guitar cabinet Antelope ZEN GO SYNERGY CORE Specs Form Factor Tabletop Display 1 x 1.77" Color LCD Channels of I/O Analog: 2 Inputs / 6 Outputs Digital: 2 Inputs / 2 Outputs Maximum Sampling Rate 192 kHz / 24-Bit Number of Microphone Preamps 2 Preamps Input Level Adjustment 1 x Knob Expansion Slots None Pad None Gain/Trim Range Mic Inputs: 65 dB High-Pass Filter None Solo/Mute None Connectivity Analog Audio I/O 2 x Combo XLR-1/4" TRS Balanced/Unbalanced Mic/Line/Hi-Z Input 2 x 1/4" TRS Balanced Monitor Output (DC-Coupled) 1 x Stereo RCA Coaxial Unbalanced Monitor Output 2 x 1/4" TRS Unbalanced Headphone Output (Front Panel) Phantom Power 48 V, Selectable On/Off (Selectable on Individual Inputs) Digital Audio I/O 1 x RCA Coaxial S/PDIF Input 1 x RCA Coaxial S/PDIF Output Host Connection / USB 1 x USB Type-C (Class-Compliant USB 2.0) USB (Non-Host) 1 x USB Type-C (Device Charging) Sync I/O None Network I/O None MIDI I/O None Wireless Connectivity None Performance Maximum Input Level Mic Inputs: +20 dBu Maximum Output Level Monitor Outputs: +20 dBu Dynamic Range Mic Inputs: 121 dB (A-Weighted) A/D Converters: 120 dB D/A Converters: 127 dB (A-Weighted) THD Mic Inputs: -106 dB THD+N A/D Converters: -100 dB D/A Converters: -115 dB EIN Mic Inputs: -128 dBu A-Weighted Digital Audio Sample Rates 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz Sample Rate Conversion None Bit Depths 24-Bit (AD/DA Conversion) 64-Bit (Clocking) Sync Sources Internal, S/PDIF Memory Card Slot None Compatibility OS Compatibility macOS Windows Included Software None Compatible Software (Not Included) Any Core Audio (Mac) Compliant Software Included Plug-Ins Preamp & Channel Strip: BA-31 Gyraf Gyratec IX Equalization: Clear Q VEQ-1A VEQ-HLF VMEQ-5 Dynamics: FET-A76 PowerFFC Power EX Power Gate Stay-Levin VCA160 X903 Reverb & Room: Auraverb Tuning: A-Tuner Guitar & Bass: Bass SuperTube VR Bass Tube 1x15 Bluelux 1x12 BurnSphere (DE) Lead Clst 1x12 Caliper 50 1x10 Darkface 65 2x12 Darkface 65 (US) England 4x12 Green 2x12 Green 4x12 Marcus II (US) Lead Modern 4x12 Modern (US) CH3 Overange 120 (UK) Plexi 59 (UK) Rock 22.10 (UK) Rock 75 (UK) Top30 2x12 Top30 (UK) Bright Tweed Deluxe (US) Vintage 4x12 Supported Drivers/API & Plug-Ins Proprietary Mobile Device Compatibility None Required Hardware Available USB Type-C Port USB Cable (Included) Internet Connection Required for Registration, Software/Driver Download, Plug-In Authorization Power Power Requirements USB Bus Power Physical Anti-Theft Features Kensington Security Slot Dimensions 7.8 x 4.6 x 2.26" / 19.8 x 11.7 x 5.75 cm Weight 1.5 lb / 0.7 kg Packaging Info Package Weight 2.325 lb Box Dimensions (LxWxH) 9.9 x 7.1 x 3.7"

Ispravna kartica, nije nesto ocuvana.

Karakteristike 2-In/4-Out USB-C Audio Interfejs 2 x SSL-dizajnirana mikrofonska pojačala Legacy 4K – analogni efekat poboljšanja u boji, inspirisano klasičnim SSL konzolama 2 profesionalna, izlaza za slušalice sa visokim naponom: stvorite drugi nezavisni miks za slušalice 24-bit / 192 kHz AD/DA AKM konverteri Monitor Mix kontrola laka za upotrebu Balansirani izlazi za monitor Dodatni nebalansirani RCA izlazi za lako povezivanje sa DJ miksetama MIDI I/O SSL Production Pack softverski paket USB 2.0 audio interfejs za Mac/PC Legacy 4K – analogni efekat poboljšanja Pravi analogni efekat poboljšanja inspirisan SSL 4000 serijom (4K) konzolom SSL ima istoriju inovacija u analognoj elektronici i dizajnu konzola. Bilo da je to zvuk klasičnog EQ '242' i '292' EQ kola , probijanje legendarnog SSL Bus Compressor-a G-serije ili neverovatna propusnost i zvučna tačnost naših revolucionarnih mikro pojačala i konzola, uvek se kreće napred sa analognim. Legacy 4K je potpuno novi analogni efekat poboljšanja, inspirisan karakterom konzole serije SSL 4000 (koja se često naziva i "4K"). Pomoću Legacy 4K dugmeta uveli smo 2 osnovne karakteristike 4K zvuka u jedno kolo, koje možete da uključite kada vam je potrebno da udahnete život u 'dosadne' ili 'suvoparne' zvučne ulazne izvore. Prva karakteristika: Visokofrekventno EQ pojačanje – Prvo što će Legacy 4K dugme uraditi je uvođenje „naprednog“, a opet muzičkog visokofrekventnog pojačanja EQ, nečeg po čemu su EQ serije 4000 poznate i voljene. Druga karakteristika: Subtilna-harmonična distorzija – 4K konzole su sinonim za prenošenje određenog 'šarma' na signale koji prolaze kroz njih. To se dešava kroz više faza harmonične distorzije iz kompresorskih VCA, VCA fejdera i drugih ključnih područja kao što su tranzistorska miks pojačala. Koristeći moderne komponente, stvorili smo sklop koji ubrizgava kontrolisanu količinu fino podešene, slatko-zvučne harmonične distorzije u putanju signala, pomažući vam da zvuku dodate više karaktera! Profesional studijski kvalitet, sa prednje i zadnje strane Pretpojačala vodeća u svojoj klasi Umetnost: Dizajnirali smo dva, prelepa detaljna mikro predpojačala koja vode u klasi kako bi snimili svaku nijansu svakog izvođenja, uz dovoljno snage da se mogu nositi sa bilo kojim mikrofonom koji priključite. Tehnologija: Mnogi USB audio interfejsi koriste standardna IC kola u svom dizajnu mikrofonskih pojačala. Mi više volimo da koristimo drugačiji pristup. Naš dvostepeni dizajn koristi mešavinu posebno odabranih diskretnih tranzistora sa niskim šumom u kombinaciji sa IC. Ovo nam omogućava da dizajniramo mikropojačala sa izvanrednim performansama buke i superiornim opsegom pojačanja. A to što radite u svom kućnom studiju ili na putu, ne znači da treba da pravite kompromise u vezi sa kvalitetom audio interfejsa. Sa SSL 2+ odlučili smo da koristimo iste delove koji se nalaze u našim većim konzolama i I / O proizvodima, isporučujući isti kvalitet koji biste očekivali od velikog studija opremljenog SSL-om, u vaš lični radni prostor. Alps potenciometri Neutrik XLR i Jack konektori NJM izlaz za slušalice za visoki napon AKM AD/DA kopnverteri – isti koji se koriste kod naših čuvenih Alpha-Link I/O proizvoda SSL Production Pack SSL Native™ Vocalstrip 2 & Drumstrip plug-inovi + i produženi probni period kompletnog paketa ​Trajne licence za Vocalstrip 2 i Drumstrip, za brzo prevođenje do najboljih vokalnih i bubnjarskih zvukova. Pored toga, isprobajte sve ostale SSL Native plug-inove (uključujući legendarne Channelstrip i Bus Compressor) besplatno tokom 6 meseci Native Instruments® Hybrid Keys i Komplete Start ​Započnite muzičko putovanje sa 2000 prilagodljivih zvukova - bubnjevi i udaraljke, bas, akustični instrumenti, sintisajzeri, tasteri i atmosfere, efekti i još mnogo toga u Komplete Start. Hibridni tasteri omogućavaju da se ode još dalje, uz miksovanje semplova klavira, sintesajzera, čekića i još toga, dodajući kreativne efekte za proizvodnju potpuno novih zvukova. Avid®Pro Tools® | First + ekskluzivna SSL kolekcija AAX plug-inova Lajt verzija softvera za muzičku produkciju koji je standard u industriji - Pro Tools sa dodatna 23 plug-ina koji uključuju klasični Compressor paket: BF-2A, BF-3A i Purple Audio MC77, Fairchild 660 i Fairchild 670. Ableton®Live Lite™ ​Lajt verzija Ableton poznatog muzičkog softvera za muzičare, producente i izvođače. 1.5GB semplova od Loopcloud® ​SSL i Loopcloud su se udružili kako bi održali kolekciju spremnih semplova i loop- ova za vaše kreacije, organizovanih intuitivno na osnovu žanra i koji su dostupni u nagrađivanoj Loopcloud aplikaciji. Tehničke specifikacije Sistemski zahtevi i specifikacije: Mac OS 10.11 ili noviji | Class-Compliant, Plug-and-play Windows 8.1, Windows 10 | Install uključen ASIO/WDM driver Povezivanje USB 2.0 tip C konektor (kutija uključuje tip C to C i tip C do A) Mikrofonska pretpojačala -130.5 dBu EIN Opseg jačine: 62 dB Instrument/Line Maksimalna Instrument jačina ulaza: +15 dBu Maksimalna Line jačina ulaza: +24 dBu *Specfikacije (merene prema AES17 Standardima) Monitor izlazi Dinamički opseg: 112 dB​ Maksimalna jačina izlaza: + 12.5 dBu​ Izlazi za slušalice Dinamički opseg: 111 dB Maksimalni izlaz: +10 dBu Učestalost semplovanja 44.1, 48, 88.2, 96, 176.4, 192 kHz

Karakteristike 2-In / 2-Out USB-C Audio Interfejs 2 x SSL-dizajnirana mikrofonska pretpojačala Legacy 4K – analogni efekat pobljšanja u boji, inspirisano klasičnim SSL konzolama Profesionalni izlaz za slušalice za visoki napon 24-bit / 192 kHz AD/DA AKM konverteri Monitor Mix Kontrola laka za upotrebu Balansirani izlazi za monitor SSL Production Pack softverski paket Audio interfejs za Mac/PC koji se napaja preko USB 2.0 Legacy 4K – analogni efekat poboljšanja Pravi analogni efekat poboljšanja inspirisan SSL 4000 serijom (4K) konzolom SSL ima istoriju inovacija u analognoj elektronici i dizajnu konzola. Bilo da je to zvuk klasičnog EQ '242' i '292' EQ kola , probijanje legendarnog SSL Bus Compressor-a G-serije ili neverovatna propusnost i zvučna tačnost naših revolucionarnih mikro pojačala i konzola, uvek se kreće napred sa analognim. Legacy 4K je potpuno novi analogni efekat poboljšanja, inspirisan karakterom konzole serije SSL 4000 (koja se često naziva i "4K"). Pomoću Legacy 4K dugmeta uveli smo 2 osnovne karakteristike 4K zvuka u jedno kolo, koje možete da uključite kada vam je potrebno da udahnete život u 'dosadne' ili 'suvoparne' zvučne ulazne izvore. Prva karakteristika: Visokofrekventni EQ pojačanje – Prvo što će Legacy 4K dugme uraditi je uvođenje „naprednog“, a opet muzičkog visokofrekventnog pojačanja EQ, nečeg po čemu su EQ serije 4000 poznate i voljene. Druga karakteristika: Subtilna-harmonična distorzija – 4K konzole su sinonim za prenošenje određenog 'šarma' na signale koji prolaze kroz njih. To se dešava kroz više faza harmonične distorzije iz kompresorskih VCA, VCA fejdera i drugih ključnih područja kao što su tranzistorska miks pojačala. Koristeći moderne komponente, stvorili smo sklop koji ubrizgava kontrolisanu količinu fino podešene, slatko-zvučne harmonične distorzije u putanju signala, pomažući vam da zvuku dodate više karaktera! Profesional studijski kvalitet, sa prednje i zadnje strane Preptojačala vodeća u svojoj klasi Umetnost: Dizajnirali smo dva, prelepa detaljna mikro predpojačala koja vode u klasi kako bi snimili svaku nijansu svakog izvođenja, uz dovoljno snage da se mogu nositi sa bilo kojim mikrofonom koji priključite. Tehnologija: Mnogi USB audio interfejsi koriste standardna IC kola u svom dizajnu mikrofonskih pojačala. Mi više volimo da koristimo drugačiji pristup. Naš dvostepeni dizajn koristi mešavinu posebno odabranih diskretnih tranzistora sa niskim šumom u kombinaciji sa IC. Ovo nam omogućava da dizajniramo mikropojačala sa izvanrednim performansama buke i superiornim opsegom pojačanja. A to što radite u svom kućnom studiju ili na putu, ne znači da treba da pravite kompromise u vezi sa kvalitetom audio interfejsa. Sa SSL 2 odlučili smo da koristimo iste delove koji se nalaze u našim većim konzolama i I / O proizvodima, isporučujući isti kvalitet koji biste očekivali od velikog studija opremljenog SSL-om, u vaš lični radni prostor. Alps potenciometri Neutrik XLR i Jack konektori NJM izlaz za slušalice za visoki napon AKM AD/DA kopnverteri – isti koji se koriste kod naših čuvenih Alpha-Link I/O proizvoda SSL Production Pack SSL Native™ Vocalstrip 2 & Drumstrip plug-inovi + i produženi probni period kompletnog paketa ​Trajne licence za Vocalstrip 2 i Drumstrip, za brzo prevođenje do najboljih vokalnih i bubnjarskih zvukova. Pored toga, isprobajte sve ostale SSL Native plug-inove (uključujući legendarne Channelstrip i Bus Compressor) besplatno tokom 6 meseci Native Instruments® Hybrid Keys i Komplete Start ​Započnite muzičko putovanje sa 2000 prilagodljivih zvukova - bubnjevi i udaraljke, bas, akustični instrumenti, sintisajzeri, tasteri i atmosfere, efekti i još mnogo toga u Komplete Start. Hibridni tasteri omogućavaju da se ode još dalje, uz miksovanje semplova klavira, sintesajzera, čekića i još toga, dodajući kreativne efekte za proizvodnju potpuno novih zvukova. ​Avid®Pro Tools® | First + ekskluzivna SSL kolekcija AAX plug-inova Lajt verzija softvera za muzičku produkciju koji je standard u industriji - Pro Tools sa dodatna 23 plug-ina koji uključuju klasični Compressor paket: BF-2A, BF-3A i Purple Audio MC77, Fairchild 660 i Fairchild 670. Ableton®Live Lite™ ​Lajt verzija Ableton poznatog muzičkog softvera za muzičare, producente i izvođače. 1.5GB semplova od Loopcloud® ​SSL i Loopcloud su se udružili kako bi održali kolekciju spremnih semplova i loop- ova za vaše kreacije, organizovanih intuitivno na osnovu žanra i koji su dostupni u nagrađivanoj Loopcloud aplikaciji. Tehničke specifikacije Sistemski zahtevi i specifikacije: Mac OS 10.11 ili noviji | Class-Compliant, Plug-and-play Windows 8.1, Windows 10 | Install uključen ASIO/WDM driver Povezivanje USB 2.0 tip C konektor (kutija uključuje tip C to C i tip C do A) Mikrofonska pretpojačala -130.5 dBu EIN Opseg jačine: 62 dB Instrument/Line Maksimalna Instrument jačina ulaza: +15 dBu Maksimalna Line jačina ulaza: +24 dBu *Specfikacije (merene prema AES17 Standardima) Monitor izlazi Dinamički opseg: 112 dB​ Maksimalna jačina izlaza: + 12.5 dBu​ Izlazi za slušalice Dinamički opseg: 111 dB Maksimalni izlaz: +10 dBu Učestalost semplovanja 44.1, 48, 88.2, 96, 176.4, 192 kHz

Technical Specifications Sample rates 44.1, 48, 88.2, 96, 176.4, 192 kHz Analog inputs 8 x 1/4" TRS line inputs (balanced/unbalanced) Max level: +24 dBu (range -96 to +22) Analog outputs 8 x 1/4" TRS line out (balanced, DC coupled 5v) Max level: +20 dBu (range -4 to +20) 1 x 1/4" TRS stereo headphone Digital I/O 1 bank (8 ch) of ADAT optical at 1x sample rates 1 bank (4 ch) of SMUX optical at 2x sample rates Switchable to stereo TOSLink (optical S/PDIF) Total I/O 16 inputs / 18 outputs (34 total) at 1x sample rates 12 inputs / 14 outputs (26 total) at 2x sample rates 8 inputs / 10 outputs (18 total) at 4x sample rates Computer I/O 1 x Thunderbolt 1 (Mac and Win) Thunderbolt 2 & 3 compatible 1 x USB 3.0 (Mac and Win) USB 2.0 and iOS compatible (class compliant) 1 x AVB/TSN Ethernet (Mac only) Requires OS X 10.11 or later Computer I/O channels Thunderbolt (44.1 to 96 kHz): 128 in/out Thunderbolt (176.4 to 192 kHz): 64 in/out USB 3.0 (44.1 to 96 kHz): 128 in/out USB 3.0 (176.4 to 192 kHz): 64 in/out AVB/TSN Ethernet: 16 to 128 in/out depends on host computer speed Headphone 1 x 1/4" TRS stereo phone (assignable) Network I/O 1 x RJ45 AVB/TSN Ethernet (1 Gbps) AVB streams (8 channels per stream) 8 in / 8 out @ 44.1 or 48 kHz 8 in / 8out @ 88.2 or 96 kHz 8 in / 8 out @ 176.4 or 192 kHz Front panel 1 x 1/4" TRS headphone output 1 x digital rotary encoder • phone volume 5 x switches • menu navigation 160 x 128 pixel RGB LCD for level meters / menu nav Power switch Power External 12-18V DC power supply 1.0A max • tip pos or neg Dimensions and weight (width x depth x height, enclosure only) 8.6 x 7 x 1.75 inches 22 x 17.75 x 4.5 cm 2.2 lbs / 1.0 kg Mac System Requirements 1 GHz Intel-based Mac or faster 2 GB RAM; 4 GB or more recommended Mac OS X version 10.8 or later Available Thunderbolt, USB or AVB/TSN Ethernet port* A large hard drive (at least 500 GB for recording) *AVB/TSN Ethernet audio interface operation requires OS X 10.11 or later Windows System Requirements 1 GHz Pentium-based PC compatible or faster 2 GB RAM; 4 GB or more recommended Windows 7, 8 or 10 Available Thunderbolt or USB port Available Ethernet port for firmware updates A large hard drive (at least 500 GB for recording) Web App Support Any web client platform: Mac, Windows, Linux, iOS, Android Any web browser: Safari, Firefox, Chrome, Opera, Explorer, etc. Web client must be connected to the same network as the MOTU interface by wire or Wi-Fi. Included Software MOTU Discovery App for Mac & PC (finds connected MOTU interfaces) MOTU Discovery App for iOS (available from Apple App Store) MOTU Pro Audio Control web app (served from the hardware itself) MOTU Audio Tools (FFT, oscilloscope, X-Y plot, phase analyzer) AudioDesk 4.0 for Mac & PC (separate download) Operating Systems For computer audio I/O: Mac OS X 10.8 or later; Windows 7 or later For web app control: Mac, Windows, Linux, iOS, Android Analog I/O Specifications Connector type Dynamic range (A-weighted) THD+N (unweighted) Max level Trim range (in 1 dB steps) Line output 1/4" TRS, balanced, tip hot 123 dB -110 dB +20 dBu 24 dB (-4 to +20) Line input 1/4" TRS, bal/unbal, tip hot 117 dB -110 dB +24 dBu 118 dBu (-96 to +22) Phones 1/4", TRS stereo 108 dB -100 dB Max. 80 mw 128 dB Compatible Mac Software The 8A ships with standard Core Audio drivers for Mac OS X for compatibility with virtually all Core Audio-compatible apps, including: MOTU Digital Performer Avid Pro Tools (version 9 or later) Apple Logic Pro Apple Logic Express Apple Garage Band Apple SoundTrack Pro Ableton Live Cockos Reaper Propellerhead Record & Reason Native Instruments Kontakt Steinberg Cubase Waves stand-alone apps (and plug-ins, via compatible host) Compatible Windows Software The 8A ships with standard ASIO and Wave drivers for Windows 7, 8 and 10 for compatibility with virtually all ASIO- and Wave-compatible audio apps, including: MOTU Digital Performer Avid Pro Tools (version 9 or later) Ableton Live Cakewalk Sonar Cockos Reaper Image Line FL Studio Propellerhead Record & Reason Sony Vegas Pro Sony Sound Forge Sony Acid Steinberg Cubase Native Instruments Kontakt Waves stand-alone apps (and plug-ins, via compatible host) 8A Feature Summary Superb analog audio quality and high-end converters Renowned ESS Sabre32 Ultra™ DAC technology delivers 123 dB dynamic range and the same proven, award-winning audio quality as MOTU's flagship 16A. Ultra-low latency and proven, high-performance MOTU drivers Round-trip latency (RTL) performance as low as 1.6 ms at 96kHz over Thunderbolt™ with high-performance DAW hosts. Mobile operation and universal connectivity Connects to your computer with Thunderbolt™, super-speed USB 3.0 or AVB/TSN Ethernet for up to 256 audio channels (128 in and 128 out). Class-compliant firmware and Industry standard drivers work with any audio apps. Connects to iPad™ with a standard camera connection kit (adapter). 34 simultaneous audio channels 8 x 8 balanced analog, 8-channel ADAT optical and independent phone out for 16 inputs and 18 outputs. DSP mixing and effects processing Flexible 48-input digital mixer with 7 stereo aux busses, 3 group sends, access to 64 network inputs, and DSP effects, including reverb, 4-band EQ, gate and compression. 32-bit floating point processing The 8A's mixing and effects DSP engine delivers virtually unlimited headroom and the utmost in sound quality. Modeled vintage effects processing Classic reverb. Compression modeled after the legendary LA-2A compressor. EQ modeled after British analog console EQs. Flexible matrix routing and splitting Send any input to any output, or multiple outputs. Includes routing to and from the computer, plus any devices on the audio network. Stand-alone operation with wireless control Connect an Apple® Airport™ or other Wi-Fi router with a standard Ethernet cable for wireless control of device settings, powerful 48-channel mixing and DSP effects. Web app control from any device Control everything from your favorite web browser on a laptop, tablet and smartphone connected to your local Wi-Fi network. System expansion Add a 2nd MOTU AVB-equipped interface with a simple CAT-5e ethernet cable. Connect up to five MOTU interfaces using a MOTU AVB/TSN Switch (sold separately). AVB/TSN audio networking Build a network with multiple interfaces and computers using standard AVB/TSN switches and network cabling, with ultra-low network latency, even over long cable runs (100 meters point to point). Stream hundreds of audio channels among devices and computers on the network. Optical I/O Connect outboard digital processors, digital mixers or other gear. 8 channels of ADAT at 44.1/48 kHz, 4 channels of SMUX at 88.2/96 kHz or stereo TOSLink (optical S/PDIF) up to 96 kHz. Comprehensive metering The full-color LCD lets you view all signal activity at a glance with detailed metering for all analog and digital I/O. Access hardware settings from a simple and convenient menu. AudioDesk® Includes AudioDesk workstation software for Mac and Windows with 24-bit recording, sample-accurate editing and 32-bit mixing and mastering.

Technical Specifications Sample rates 44.1, 48, 88.2, 96, 176.4, 192 kHz Digital I/O 1x BNC MADI in 2x BNC MADI out (mirrored) 1x optical MADI in/out 64/56 ch @ 1x, 32/28 @ 2x, 16/14 @ 4x Total I/O 128 in / 128 out (256 total) at 1x sample rates 64 in / 64 out (128 total) at 2x sample rates 32 in / 32 out (64 total) at 4x sample rates Computer I/O 1 x USB 2.0 audio class compliant USB 3.0 and iOS compatible Computer I/O channels 64 in/out at 1x (44.1 to 48 kHz) 32 in/out at 2x (88.2 to 96 kHz) 24 in/out at 4x (176.4 to 192 kHz) Headphone 1 x 1/4" TRS stereo phone (assignable) Network I/O 1 x RJ45 AVB/TSN Ethernet (1 Gbps) AVB streams (8 channels per stream) 8 in / 8 out @ 44.1 or 48 kHz 8 in / 8 out @ 88.2 or 96 kHz 4 in / 4 out @ 176.4 or 192 kHz Front panel 1 x 1/4" TRS headphone output 4x switches for menu navigation 160 x 128 RGB LCD for level meters / menu Power External 12-18V DC power supply 1.0A max • tip pos or neg Dimensions and weight (width x depth x height, enclosure only) 8.6 x 7 x 1.75 inches 22 x 17.75 x 4.5 cm 2.0 lbs / 0.9 kg Mac System Requirements 1 GHz Intel-based Mac or faster 2 GB RAM; 4 GB or more recommended Mac OS X version 10.8 or later Available USB 2.0 or 3.0 port A large hard drive (at least 500 GB for recording) Windows System Requirements 1 GHz Pentium-based PC compatible or faster 2 GB RAM; 4 GB or more recommended Windows 7, 8 or 10 Available USB 2.0 or 3.0 port A large hard drive (at least 500 GB for recording) Web App Support Any web client platform: Mac, Windows, Linux, iOS, Android Any web browser: Safari, Firefox, Chrome, Opera, Explorer, etc. Included Software MOTU Discovery App for Mac & PC (finds connected MOTU interfaces) MOTU Discovery App for iOS (available from Apple App Store) MOTU Pro Audio Control web app (served from the hardware itself) MOTU Audio Tools (FFT, oscilloscope, X-Y plot, phase analyzer) AudioDesk 4.0 for Mac & PC (separate download) Operating Systems For computer audio I/O: Mac OS X 10.8 or later; Windows 7 or later For web app control: Mac, Windows, Linux, iOS, Android Compatible Mac Software The M64 ships with standard Core Audio drivers for Mac OS X for compatibility with virtually all Core Audio-compatible apps, including: MOTU Digital Performer Avid Pro Tools (version 9 or later) Apple Logic Pro Apple Logic Express Apple Garage Band Apple SoundTrack Pro Ableton Live Presonus Studio One Propellerhead Record & Reason Steinberg Cubase Cockos Reaper Native Instruments Kontakt Waves stand-alone apps (and plug-ins, via compatible host) Compatible Windows Software The M64 ships with standard ASIO and Wave drivers for Windows 7, 8 and 10 for compatibility with virtually all ASIO- and Wave-compatible audio apps, including: MOTU Digital Performer Avid Pro Tools (version 9 or later) Ableton Live Cakewalk Sonar Cockos Reaper Image Line FL Studio Native Instruments Kontakt Presonus Studio One Propellerhead Record & Reason Sony Vegas Pro Sony Sound Forge Sony Acid Steinberg Cubase Waves stand-alone apps (and plug-ins, via compatible host) M64 Feature Summary 256 channels of MADI I/O Optical MADI (64 channels in and out), plus independent coaxial/BNC MADI (64 channels in and out) with extra duplicate output, in all standard formats and sample rates. Flexible repeater, router, converter and splitter Send any input to any output, or split to multiple output channels. Convert optical MADI to coax MADI. Includes routing to and from the computer, plus any devices on the AVB-TSN network. Stand-alone operation with wireless control Connect a standard Wi-Fi router with a standard Ethernet cable for wireless control of device settings, routing/splitting, powerful 48-channel mixing and DSP effects. DSP mixing and effects processing Flexible 48-input digital mixer with 7 stereo aux busses, 3 stereo groups, access to 64 network inputs, and DSP effects, including reverb, 4-band EQ, gate and compression. Ultra-low latency and proven, high-performance MOTU drivers Universal connectivity over high-speed USB 2.0 (3.0 and iOS compatible) and AVB. Renowned drivers deliver industry-leading low latency and rock solid performance. Convenient headphone monitoring Assignable front-panel headphone output with volume control allows for monitoring of any stereo channel pair. Word clock I/O Standard word clock input and output for resolving to other digital audio gear or house sync. Comprehensive metering The full-color LCD lets you view all signal activity at a glance with detailed metering for all I/O. Access hardware settings from a simple and convenient menu. Modeled vintage effects processing Classic reverb. Compression modeled after the legendary LA-2A compressor. EQ modeled after British analog console EQs. Web app control from any device Control everything from your favorite web browser on a laptop, tablet and smartphone connected to your local Wi-Fi network. System expansion Add a 2nd MOTU AVB-equipped interface with a simple CAT-5e ethernet cable. Connect up to five MOTU interfaces using a MOTU AVB Switch (sold separately). AVB-TSN audio networking Build a network with multiple interfaces and computers using standard AVB-TSN switches and network cabling, with ultra-low network latency, even over long cable runs (100 meters point to point). Stream hundreds of audio channels among devices and computers on the network. Audio analysis tools includes a full-screen real-time FFT display, spectrogram “waterfall” display, full-featured oscilloscope, X-Y plot and phase analyzer. AudioDesk Includes AudioDesk workstation software for Mac and Windows with 24-bit recording, sample-accurate editing and 32-bit mixing and mastering.

Technical Specifications Sample rates 44.1, 48, 88.2, 96, 176.4, 192 kHz Digital I/O 2x stereo AES3 (AES/EBU) on XLR male/female 2x stereo S/PDIF on RCA Total I/O 8 in / 8 out (16 total) at 1x sample rates 8 in / 8 out (16 total) at 2x sample rates n/a at 4x sample rates Computer I/O 1 x USB 2.0 audio class compliant USB 3.0 and iOS compatible Computer I/O channels 64 in/out at 1x (44.1 to 48 kHz) 32 in/out at 2x (88.2 to 96 kHz) 24 in/out at 4x (176.4 to 192 kHz) Headphone 1 x 1/4" TRS stereo phone (assignable) Network I/O 1 x RJ45 AVB/TSN Ethernet (1 Gbps) AVB streams (8 channels per stream) 4 in / 4 out @ 44.1 or 48 kHz 4 in / 4 out @ 88.2 or 96 kHz 2 in / 2 out @ 176.4 or 192 kHz Front panel 1 x 1/4" TRS headphone output 4x switches for menu navigation 160 x 128 RGB LCD for level meters / menu Power External 12-18V DC power supply 1.0A max • tip pos or neg Dimensions and weight (width x depth x height, enclosure only) 8.6 x 7 x 1.75 inches 22 x 17.75 x 4.5 cm 2.0 lbs / 0.9 kg Mac System Requirements 1 GHz Intel-based Mac or faster 2 GB RAM; 4 GB or more recommended Mac OS X version 10.8 or later Available USB 2.0 or 3.0 port A large hard drive (at least 500 GB for recording) Windows System Requirements 1 GHz Pentium-based PC compatible or faster 2 GB RAM; 4 GB or more recommended Windows 7, 8 or 10 Available USB 2.0 or 3.0 port A large hard drive (at least 500 GB for recording) Web App Support Any web client platform: Mac, Windows, Linux, iOS, Android Any web browser: Safari, Firefox, Chrome, Opera, Explorer, etc. Included Software MOTU Discovery App for Mac & PC (finds connected MOTU interfaces) MOTU Discovery App for iOS (available from Apple App Store) MOTU Pro Audio Control web app (served from the hardware itself) MOTU Audio Tools (FFT, oscilloscope, X-Y plot, phase analyzer) AudioDesk 4.0 for Mac & PC (separate download) Operating Systems For computer audio I/O: Mac OS X 10.8 or later; Windows 7 or later For web app control: Mac, Windows, Linux, iOS, Android Compatible Mac Software The 8D ships with standard Core Audio drivers for Mac OS X for compatibility with virtually all Core Audio-compatible apps, including: MOTU Digital Performer Avid Pro Tools (version 9 or later) Apple Logic Pro Apple Logic Express Apple Garage Band Apple SoundTrack Pro Ableton Live Presonus Studio One Propellerhead Record & Reason Steinberg Cubase Cockos Reaper Native Instruments Kontakt Waves stand-alone apps (and plug-ins, via compatible host) Compatible Windows Software The 8D ships with standard ASIO and Wave drivers for Windows 7, 8 and 10 for compatibility with virtually all ASIO- and Wave-compatible audio apps, including: MOTU Digital Performer Avid Pro Tools (version 9 or later) Ableton Live Cakewalk Sonar Cockos Reaper Image Line FL Studio Native Instruments Kontakt Presonus Studio One Propellerhead Record & Reason Sony Vegas Pro Sony Sound Forge Sony Acid Steinberg Cubase Waves stand-alone apps (and plug-ins, via compatible host) 8D Feature Summary Eight channels of digital audio I/O and conversion with SRC Four channels of professional AES3 (AES/EBU) digital I/O, plus four channels of standard S/PDIF digital audio I/O, with sample rate conversion on all inputs. Flexible, router, converter and splitter Send any input to any output, or split to multiple output channels. Convert any format to any other (AES3, S/PDIF, AVB-TSN and USB). Includes routing to and from the computer, plus any devices on the AVB-TSN network. Stand-alone operation with wireless control Connect a standard Wi-Fi router with a standard Ethernet cable for wireless control of device settings, routing/splitting, powerful 48-channel mixing and DSP effects. DSP mixing and effects processing Flexible 48-input digital mixer with 7 stereo aux busses, 3 stereo groups, access to 32 network inputs, and DSP effects, including reverb, 4-band EQ, gate and compression. Ultra-low latency and proven, high-performance MOTU drivers Universal connectivity over high-speed USB 2.0 (3.0 and iOS compatible) and AVB. Renowned drivers deliver industry-leading low latency and rock solid performance. Comprehensive metering The full-color LCD lets you view all signal activity at a glance with detailed metering for all I/O. Access hardware settings from a simple and convenient menu. Convenient headphone monitoring Assignable front-panel headphone output with volume control allows for monitoring of any stereo channel pair. Word clock I/O Standard word clock input and output for resolving to other digital audio gear or house sync. 32-bit floating point processing The 8D's mixing and effects DSP engine delivers virtually unlimited headroom and the utmost in sound quality. Modeled vintage effects processing Classic reverb. Compression modeled after the legendary LA-2A compressor. EQ modeled after British analog console EQs. Web app control from any device Control everything from your favorite web browser on a laptop, tablet and smartphone connected to your local Wi-Fi network. System expansion Add a 2nd MOTU AVB-equipped interface with a simple CAT-5e ethernet cable. Connect up to five MOTU interfaces using a MOTU AVB Switch (sold separately). AVB-TSN audio networking Build a network with multiple interfaces and computers using standard AVB-TSN switches and network cabling, with ultra-low network latency, even over long cable runs (100 meters point to point). Stream hundreds of audio channels among devices and computers on the network. Audio analysis tools includes a full-screen real-time FFT display, spectrogram “waterfall” display, full-featured oscilloscope, X-Y plot and phase analyzer. AudioDesk Includes AudioDesk workstation software for Mac and Windows with 24-bit recording, sample-accurate editing and 32-bit mixing and mastering.

Technical Specifications Sample rates 44.1, 48, 88.2, 96, 176.4, 192 kHz Digital I/O 4 banks of 8-ch ADAT optical at 1x sample rates 4 banks of 4-ch SMUX optical at 2x sample rates Individually switchable to stereo TOSLink (optical S/PDIF) Total I/O 32 in / 32 out (64 total) at 1x sample rates 16 in / 16 out (32 total) at 2x sample rates n/a at 4x sample rates Computer I/O 1 x USB 2.0 audio class compliant USB 3.0 and iOS compatible Computer I/O channels 64 in/out at 1x (44.1 to 48 kHz) 32 in/out at 2x (88.2 to 96 kHz) 24 in/out at 4x (176.4 to 192 kHz) Headphone 1 x 1/4" TRS stereo phone (assignable) Network I/O 1 x RJ45 AVB/TSN Ethernet (1 Gbps) AVB streams (8 channels per stream) 4 in / 4 out @ 44.1 or 48 kHz 4 in / 4 out @ 88.2 or 96 kHz 2 in / 2 out @ 176.4 or 192 kHz Front panel 1 x 1/4" TRS headphone output 4x switches for menu navigation 160 x 128 RGB LCD for level meters / menu Power External 12-18V DC power supply 1.0A max • tip pos or neg Dimensions and weight (width x depth x height, enclosure only) 8.6 x 7 x 1.75 inches 22 x 17.75 x 4.5 cm 2.0 lbs / 0.9 kg Mac System Requirements 1 GHz Intel-based Mac or faster 2 GB RAM; 4 GB or more recommended Mac OS X version 10.8 or later Available USB 2.0 or 3.0 port A large hard drive (at least 500 GB for recording) Windows System Requirements 1 GHz Pentium-based PC compatible or faster 2 GB RAM; 4 GB or more recommended Windows 7, 8 or 10 Available USB 2.0 or 3.0 port A large hard drive (at least 500 GB for recording) Web App Support Any web client platform: Mac, Windows, Linux, iOS, Android Any web browser: Safari, Firefox, Chrome, Opera, Explorer, etc. Included Software MOTU Discovery App for Mac & PC (finds connected MOTU interfaces) MOTU Discovery App for iOS (available from Apple App Store) MOTU Pro Audio Control web app (served from the hardware itself) MOTU Audio Tools (FFT, oscilloscope, X-Y plot, phase analyzer) AudioDesk 4.0 for Mac & PC (separate download) Operating Systems For computer audio I/O: Mac OS X 10.8 or later; Windows 7 or later For web app control: Mac, Windows, Linux, iOS, Android Compatible Mac Software The LP32 ships with standard Core Audio drivers for Mac OS X for compatibility with virtually all Core Audio-compatible apps, including: MOTU Digital Performer Avid Pro Tools (version 9 or later) Apple Logic Pro Apple Logic Express Apple Garage Band Apple SoundTrack Pro Ableton Live Presonus Studio One Propellerhead Record & Reason Steinberg Cubase Cockos Reaper Native Instruments Kontakt Waves stand-alone apps (and plug-ins, via compatible host) Compatible Windows Software The LP32 ships with standard ASIO and Wave drivers for Windows 7, 8 and 10 for compatibility with virtually all ASIO- and Wave-compatible audio apps, including: MOTU Digital Performer Avid Pro Tools (version 9 or later) Ableton Live Cakewalk Sonar Cockos Reaper Image Line FL Studio Native Instruments Kontakt Presonus Studio One Propellerhead Record & Reason Sony Vegas Pro Sony Sound Forge Sony Acid Steinberg Cubase Waves stand-alone apps (and plug-ins, via compatible host) LP32 Feature Summary 32 channels of ADAT optical “lightpipe” audio Four independent banks of 8-channel ADAT optical at 44.1 or 48 kHz or 4-channel SMUX (16 channels total) at 88.2 or 96 kHz. Support for TOSLink Each optical input or output is individually switchable to stereo TOSLink (optical S/PDIF), regardless of the current sample rate setting (from 44.1 to 96 kHz). Flexible router, converter and splitter Send any input to any output, or split to multiple output channels. Convert any format to any other (Optical, AVB-TSN and USB). Includes routing to and from the computer, plus any devices on the AVB-TSN network. Stand-alone operation with wireless control Connect a standard Wi-Fi router with a standard Ethernet cable for wireless control of device settings, routing/splitting, powerful 48-channel mixing and DSP effects. DSP mixing and effects processing Flexible 48-input digital mixer with 7 stereo aux busses, 3 stereo groups, access to 32 network inputs, and DSP effects, including reverb, 4-band EQ, gate and compression. Ultra-low latency and proven, high-performance MOTU drivers Universal connectivity over high-speed USB 2.0 (3.0 and iOS compatible) and AVB. Renowned drivers deliver industry-leading low latency and rock solid performance. Comprehensive metering The full-color LCD lets you view all signal activity at a glance with detailed metering for all I/O. Access hardware settings from a simple and convenient menu. Convenient headphone monitoring Assignable front-panel headphone output with volume control allows for monitoring of any stereo channel pair. Word clock I/O Standard word clock input and output for resolving to other digital audio gear or house sync. 32-bit floating point processing The LP32's mixing and effects DSP engine delivers virtually unlimited headroom and the utmost in sound quality. Modeled vintage effects processing Classic reverb. Compression modeled after the legendary LA-2A compressor. EQ modeled after British analog console EQs. Web app control from any device Control everything from your favorite web browser on a laptop, tablet and smartphone connected to your local Wi-Fi network. System expansion Add a 2nd MOTU AVB-equipped interface with a simple CAT-5e ethernet cable. Connect up to five MOTU interfaces using a MOTU AVB Switch (sold separately). AVB-TSN audio networking Build a network with multiple interfaces and computers using standard AVB-TSN switches and network cabling, with ultra-low network latency, even over long cable runs (100 meters point to point). Stream hundreds of audio channels among devices and computers on the network. Audio analysis tools Includes a full-screen real-time FFT display, spectrogram “waterfall” display, full-featured oscilloscope, X-Y plot and phase analyzer. AudioDesk Includes AudioDesk workstation software for Mac and Windows with 24-bit recording, sample-accurate editing and 32-bit mixing and mastering.

HI-DEFINITION AUDIO Your desktop companion for better sound With Zen Q Synergy Core, attain a sonically precise sound in your studio. The interface has all of the core performance qualities that high-end Antelope Audio interfaces are known for, so you can reap the benefits of seamless workflow for any desktop studio layout. Class-leading AD/DA conversion The AD/DA converter chips grant 127dB of headroom with undeniable definition. Discrete console-grade preamps The two ultra-linear preamps feature true console-grade circuitry that imparts warmth and captures the natural details of any recorded instrument or voice. 64-bit AFC™ technology The 64-bit Acoustically Focused Clocking™ technology gives Zen Q efficient AD/DA conversion, deep soundstage, and clean channel separation. SYNERGY CORE COLLECTION Refine your sound with Synergy Core FX Along with our signature AuraVerb, Zen Q comes equipped with a virtual library of 37 free effects from the Synergy Core effects platform. You’ll get access to everything you need to capture and process audibly rich and dynamic sound. The collection includes analog-modeled compressors, equalizers, and mic-preamps, as well as guitar cabs & amps for dialing in the perfect guitar tone. Grow your collection of Synergy Core effects with 50 optional expansions. The selection grows over time and includes emulations of classic gear and special third-party effects. Antelope Audio is proud to include Grove Hill’s Liverpool, Gyratec’s legendary EQs, Antares’ Auto-Tune, and Inertia’s Instinct. Processes effects in real-time with imperceptible latency while monitoring, tracking or mixing. Offloads all processing to the interface thus saving your host computer CPU & memory. EXPLORE SYNERGY CORE Taking advantage of high-speed Thunderbolt, the AFX2DAW * plug-in lets you use Synergy Core effects as inserts inside your chosen DAW. This simplifies workflow and enables easy, immediate effects automation. *Available as a separate purchase for Mac Thunderbolt. FAST & FLEXIBLE From the desktop and beyond With diverse connectivity options and a compact size, Zen Q Synergy Core can be easily integrated into any setup or style of workflow you prefer. Its portability enables you to take the studio wherever you need to go, whether you’re recording on location or performing a live set onstage. Record, mix, and stream with low-latency – no power supply required. Bus-powered Thunderbolt Bus-powered Thunderbolt 3 connectivity gives you ultra-low latency and the utmost stability, allowing you to record from any location without ever questioning Zen Q’s reliability. Switchable inputs Zen Q comes with 2 combo XLR jacks and 2 additional TRS LINE/Hi-Z inputs. Use the combo jacks to choose between our Discrete console-grade preamps, LINE, or Hi-Z inputs. Expandable connectivity Take full advantage Zen Q’s digital expandability. The interface is expandable over ADAT via 8 additional input channels, and S/PDIF with 2 channels in and out. Loopback function for streaming For a convenient online broadcasting setup, use loopback capabilities for streaming and recording OS/DAW playback and interface inputs simultaneously. Session recall Enhance your workflow by customizing and saving session presets, then recall them from the hardware effortlessly. CONVERSION & CLOCKING • Class-leading AD/DA conversion with up to 127dB of headroom • Recording, mixing and playback at up to 24-bit/192kHz • Proprietary 64-bit Acoustically Focused Clocking (AFC™) technology & Jitter Management algorithm delivering increased width, separation, and detail. CONNECTIVITY • 2×Discrete ultra-linear preamps with 65dB of gain for studio-quality recordings. Both work as microphone/line/ Hi-Z inputs, on combo XLR jacks, and supply 48V of phantom power • 2×Hi-Z/line instrument inputs over TRS • 2×DC-coupled line outputs over TRS • Thunderbolt™ 3 port carrying up to 16 input and 16 output channels in any popular DAW with custom macOS & Windows drivers • Digitally expandable over ADAT IN , with 8 channels available • Digitally expandable over S/PDIF I/O, with 2 channels available • 1 × Stereo monitor output over TRS • 2 × Stereo headphone outputs with separate volume control WORKFLOW-ENHANCING FEATURES • Bus-powered interface – powered by the Thunderbolt™ connection without need for a dedicated power source • Direct monitoring with Synergy Core effects, processed in real-time with imperceptible latency • Simplified I/O routing with pre-configured settings, allowing immediate recording and playback • Front panel with easily accessible controls over input and output levels, and other settings • Customizable presets with signal routing, level adjustments, mixer and effects settings • Customizable monitoring mixes with adjustable volume, pan and reverb REAL-TIME EFFECTS PROCESSING • Collection of 37 Synergy Core effects modeled after classic and rare analog outboard gear • Synergy Core proprietary onboard platform powered by 2×DSP & 1 × FPGA chips for real-time effects processing with imperceptible latency • Modeling Engine allowing pairing with the Edge line of microphones for real-time use of vintage microphone emulations 37 INCLUDED SYNERGY CORE EFFECTS Gyraf Gyratec IX (Dual Tube Mic Preamp with HPF) VCA160 (VCA Compressor / Limiter) Stay-Levin (Vari-Mu Tube Compressor) FET-A76 (FET Compressor / Limiting Amplifier) VEQ-1A (2-Band Tube EQ) VMEQ-5 (3-Band Tube Mid-Range EQ) X903 (VCA Compressor / Limiter) PowerFFC (Feed-Forward Compressor) Clear Q (Parametric EQ) Power EX (Expander) VEQ-HLF (Tube 2-Band HPF / LPF) Auraverb (Reverb) BA-31 (Germanium Mic Preamp) Power Gate (Noise Gate) A-Tuner (Guitar Tuner) Plexi 59 (UK) (Tube Guitar Amp) Bass SuperTube VR (Tube Guitar Amp) Darkface 65 (US) (Tube Guitar Amp) Top30 (UK) Bright (Tube Guitar Amp) Tweed Deluxe (US) (Tube Guitar Amp) Overange 120 (UK) (Tube Guitar Amp) BurnSphere (DE) Lead (Tube Guitar Amp) Marcus II (US) Lead (Tube Guitar Amp) Modern (US) CH3 (Tube Guitar Amp) Rock 75 (UK) (Tube Guitar Amp) Rock 22.10 (UK) (Tube Guitar Amp) Darkface 65 2×12 (2×12 Guitar Cabinet) Top30 2×12 (2×12 Guitar Cabinet) Modern 4×12 (4×12 Guitar Cabinet) Green 2×12 (2×12 Guitar Cabinet) Vintage 4×12 (4×12 Guitar Cabinet) Green 4×12 (4×12 Guitar Cabinet) Caliper 50 1×10 (1×10 Guitar Cabinet) Bluelux 1×12 (1×12 Guitar Cabinet) Clst 1×12 (1×12 Guitar Cabinet) England 4×12 (4×12 Guitar Cabinet) Bass Tube 1×15 (1×15 Guitar Cabinet) IN-THE-BOX CONTENT • Zen Q Synergy Core • Warranty card *Note: Thunderbolt cable is not included • Getting Started leaflet

Potpuno ispravna kartica za zvuk na usb, plug and play.

Povezivanje PCI USB Čipset Xonar U7 Povezivanje Line-in Mic-in SPDIF-out Sample rate 95 KHz SNR 114dB Reklamacioni period Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača

Tip: USB Vrsta: Eksterna Garancija: Zakonska saobraznost Zemlja porekla: Definisana na deklaraciji Barkod: 8606019544690 Uvoznik: EWE

Description Designed for immersive formats like Dolby Atmos and all performance-critical high-channel-count Dante applications, RedNet PCIeNX delivers 128 x128 audio channels (up to 192kHz) with ultra-low latency. Features 128x128 channels (24-bit/192kHz) with ultra-low round-trip latency Perfect for large recording sessions and post-production work using Dolby Atmos and other immersive formats Dual Ethernet RJ-45 connections allow for both switched and redundant mode, offering flexible connectivity Supports the latest standards, including AES67 and compliance for SMPTE ST 2110 (DDM required) Compatible with Windows or Mac computers (Intel and Apple Silicon supported) Easily installed in a PCIe slot or Thunderbolt chassis Integrated network interface – allowing a single-cable connection for audio and network control Purchase with confidence. RedNet PCIeNX is backed by Focusrite’s 3-year warranty award-winning 24/7/365 technical support

A pair of rear-panel XLR outputs offers line level signals of up to 24dBu with top panel level control and mute switch, while the front panel 1/4" headphone output is capable of driving high signal levels perfect for monitoring in high-SPL environments. The bottom of the sturdy aluminium and steel chassis features a threaded mic stand boss allowing RedNet AM2 to be placed in any convenient location whether on a desk or at a performer's fingertips on a stand. Finally, the IEEE standard PoE input allows a single Ethernet cable to provide power, remote control, clocking and audio data to RedNet AM2. Stereo line output and headphone for Dante audio-over-IP networksPower-over-Ethernet supplied: IEEE 802.3af compliantUp to 24-bit, 96kHz sampling ratesRobust steel and aluminium chassisPowerful headphone output even with high-impedance headphonesUp to 24dBu line output levelsIndependent level control of headphone and line outputsMute switch for line outputMic stand mountKensington security slotIntegrated network switch allowing daisy-chaining of network devicesBrainworx bx_console Focusrite – exclusive plug-in that faithfully captures the sound, feel and styling of the original Focusrite ISA 110 Equaliser and ISA 130 Dynamics Modules.AES67 compliant SPECIFICATIONS LINE LEVEL OUTPUTS 0 DBFS Reference Output Levels 18 or 24dBu (switchable) Frequency Response Output 20Hz - 20kHz ±0.05dB THD N Output Dynamic Range 120dB A-weighted (typical), 20Hz - 20kHz CROSSTALK Output To Output HEADPHONE OUTPUT 0 DBFS Reference Levels Headphones 19dBm Headphone Frequency Response 20Hz - 20kHz ±0.05dB Headphone THD N Headphone Dynamic Range 118dB A-weighted (typical), 20Hz - 20kHz Output Impedance 5O Headphone Impedance 32 Ohm - 600 Ohm DIGITAL PERFORMANCE Supported Sample Rates 44.1 / 48 / 88.2 / 96 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit Clock Sources Internal or from Dante Network Master Minimum Latency 1ms FRONT PANEL CONNECTIVITY Headphone Outputs 1 x 1/4" stereo jack Line Outputs 2 x Male XLR PSU (PoE And DC) 1 x PoE (Port 1) Input and 1 x DC 12V Barrel Input Connector Network Green LED: Indicates device is network master or network slave, shows valid network lock REAR PANEL CONNECTIVITY TOP PANEL INDICATORS Power LED illuminates Green when PoE is connected and Red when DC power is connected Signal Signal indicator LED for both network input channels Mute Red LED Control Functions 2 x Pots DIMENSIONS Height (Chassis Only) 48mm/ 1.89" Height (Inc. Pots And Feet) 58mm/ 2.28" Width 140mm/ 5.51" Depth (Chassis Only) 106.5mm/ 4.19" Depth (Inc. Connectors) 116mm/ 4.57" WEIGHT Weight 0.81kg POWER Power Over Ethernet (PoE) Complies with IEEE 802.3af class 0 Power-over-Ethernet standard DC Power Supply 1 x 12V 1.2A DC Power Supply Power Consumption PoE: 11.0W - DC: 9.8W Operating Temperature Operates at up to an ambient temperature of 50 degrees Celcius

A local input mixer allows monitoring control for people who want to hear their parts louder over the mix. Conversely, a control lockout parameter ensures your settings remain unchanged when used remotely. On the rear of the interface you'll find two locking, combination XLR-1/4" inputs, as well as two level-controlled XLR outputs that can go up to 24 dBu. On the front of interface, your 1/4" headphone output is powered by an amplifier capable of driving both low- and high-impedance headphones. The Red Evolution mic pres provide clean gain, phantom power, high-pass filtering at 80 Hz, per-channel polarity reversing, and an Air mode that emulates the sound of Focusrite's classic transformer-based mic preamps, giving you a boost at 10 and 20 kHz respectively. The X2P can capture and reproduce audio at sample rates and resolutions of up to 96 kHz and 24 bits. On the output side, the RedNet X2P provides a dynamic range of 120 dB at line level and 117 dB for the headphones. Built out of aluminum and steel, the unit is quite sturdy and can be mounted directly to a mic stand, which keeps it out of the way yet within reach. Key Features at a Glance Stereo 2x2 audio interface for Dante AoIP networks Two Red Evolution mic preamps for mic, line, or instrument level inputs Power-over-Ethernet supplied: IEEE 802.3af compliant Up to 24-bit, 96 kHz sampling rates Robust steel and aluminum chassis Local input mix to allow personalized monitoring Powerful headphone output, even with high-impedance headphones Local control lockout of mic settings, output settings, or both Up to 24 dBu line output levels Independent level control of headphone and line outputs Mute switch for line output Mic stand mount Kensington security slot Integrated network switch allows daisy-chaining of network devices Includes Brainworx bx_console Focusrite, a plug-in that faithfully captures the sound, feel, and style of the original Focusrite ISA 110 Equalizer and ISA 130 Dynamics Modules Focusrite X2P 2x2 Specs Form Factor Desktop Display 1 x LCD Channels of I/O 2 Input / 2 Output Number of Microphone Preamps 2 Preamps Signal Processing Gain/Trim Range Hi-Z Inputs: 0 to 68 dB Mic Inputs: 0 to 68 dB Connectivity Analog Audio I/O 2 x Combo XLR-1/4" TRS Mic/Line Input 1 x 1/4" TRS Headphone Output 2 x XLR 3-Pin Monitor Output Phantom Power 48 V (Selectable on Individual Inputs) Digital Audio I/O None Host Connection / USB None Host Connection Protocol None USB (Non-Host) None Sync I/O None Network I/O 1 x etherCON/RJ45 Dante 1 x etherCON/RJ45 Dante (PoE) MIDI I/O None Performance Frequency Response Hi-Z Inputs: 20 Hz to 35 kHz ±0.1 dB Mic, Line Inputs: 20 Hz to 35 kHz ±0.1 dB Maximum Input Level Hi-Z Inputs: +15 dBu (Min Gain) Mic Inputs: +24 dBu (Min Gain) Impedance Hi-Z Inputs: 2 Megohms Mic/Line Inputs: 6.2 Kilohms Dynamic Range Mic/Line Inputs: 120 dBA SNR Hi-Z Inputs: 118 dBA Mic/Line Inputs: 120 dBA THD+N Hi-Z Inputs: < -100 dB / < 0.001% Inputs: < -103 dB / < 0.0007% Crosstalk Headphone Outputs: < -85 dB Inputs: < -72 dB System: < -159 dB EIN Mic/Line Inputs: < -130 dBu A-Weighted CMRR Mic/Line Inputs: -80 dB Line Outputs: -80 dB Digital Audio Sample Rates 44.1 / 48 / 88.2 / 96 kHz Bit Depths 24-Bit (AD/DA Conversion) Power Power Requirements AC/DC Power Adapter (Included) AC/DC Power Adapter 12 VDC at 1.2 A (Included) Power Consumption 13.3 W Physical Operating Temperature 113°F / 45°C Dimensions 5.5 x 4.1 x 1.9" / 140 x 104 x 47.5 mm Weight 2.3 lb / 1.0 kg Packaging Info Package Weight 4.25 lb Box Dimensions (LxWxH) 15 x 7.9 x 4.85"

PLUG YOUR INSTRUMENT STRAIGHT IN Start recording the moment inspiration strikes, by plugging any instrument or mic straight in. Polish Your Sound Whatever type of music you want to make, and whatever you want to record it on, iTrack Solo is the simplest way to do it. Make Some Noise iTrack Solo isn’t just for recording. Connect your speakers, crank up the volume and totally immerse yourself in the sound of your music, apps, video games, movies – or anything else. Maintain Your Feng Shui Fewer cables means less clutter. You only need to plug iTrack Solo into the mains if you’re using it with iPad. Otherwise, your USB connection will power it. IDEAL FOR IPAD Certified by Apple and compatible with any Lightning™ iPad: iPad Pro, iPad mini, iPad mini with Retina Display, iPad (4th gen and up) and iPad Air. YOU ALREADY KNOW HOW You don't need to learn anything new. Record your songs directly into Garageband, Cubasis, Auria and many other apps. THE SOUND OF SUCCESS Capture and play back your sound with pristine quality, using the very latest in digital audio technology. LOOK AS GOOD AS IT SOUNDS The gorgeous bead-blasted aluminium case is tough enough to throw in your bag and take with you anywhere. TECHNICAL SPECIFICATIONS FRONT PANEL 1 microphone input - XLR 1 Instrument input ¼’ unbalanced 2 Gain knobs 2 Gain halo signal indicators 48V Phantom power switch Direct monitor switch Large monitor level dial (controls headphone and line level outputs) USB Connection LED indicator Headphone output ¼’ TRS Jack REAR PANEL 2 unbalanced monitor outputs - RCA Phono DEVICE LINK port (to connect iTrack Solo to iPad) USB 2.0 Port Kensington Lock slot INCLUDED SOFTWARE Ableton Live Lite 9 - professional music making software to use your iTrack Solo with a Mac or PC. Focusrite Scarlett plug-in suite - collection of software plug-ins bringing effects to your music software (like Ableton Live for example). MIC ANALOGUE INPUT PERFORMANCE Frequency Response 20Hz - 20kHz +/- 0.2 dB THD+N < 0.002% (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter) Equivalent Input Noise (EIN) < -120dB: measured at minimum gain with, -1 dBFS (20Hz/22kHz bandpass filter) Gain Range +10dB to +55dB Max Input Level +4dBu INSTRUMENT Frequency Response 20Hz - 20kHz +/- 0.2dB THD+N 0.003% (measured with -1dBFS input and 22Hz/22kHz bandpass filter) Noise -87dBu (22Hz/22kHz bandpass filter) Gain Range -10dB to +55dB Max Input Level +2dBu ANALOGUE OUTPUT PERFORMANCE Nominal Output Level 0dBFS = 10dBu, unbalanced Frequency Response 20Hz - 20kHz +/- 0.2dB THD+N < 0.001% (measured with 0dBFS input 22Hz/22kHz bandpass filter, un-weighted) DIGITAL PERFORMANCE Clock sources Internal clock only A-D Dynamic Range 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range 114dB D-A Dynamic Range 105dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB Supported sample rates 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz - Mac and PC 44.1 KHz, 48 KHz - iPad CROSSTALK Input to Input Better than 90dB Output to Output Better than 90dB Input to Output Better than 85dB INPUT METERING Ring LED lit Green Signal present (-24 dBFS) Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second WEIGHT AND DIMENSIONS Height 45 mm / 1.77' Width 150 mm / 6' Depth 100 mm / 4' Weight 500 g / 1 lb IN THE BOX iTrack Solo 1.2m USB cable 1.2m "DEVICE LINK" cable (to connect to a Lightning iPad) Getting started guide Registration card Download card for Ableton Live Lite / Scarlett Plug-in Suite USB power supply (US only) COMPATIBLE IPADS iTrack Solo Lightning: Any iPad with Lightning connector. Standard iTrack Solo: iPad (1st gen), iPad (2nd gen) and iPad (3rd gen)