SONOS Beam White Proizvođač: SONOS Sistem zvučnika: 1.0 Način povezivanja: WiFi Garantni rok: 2 Godine 5.01 5.0

LG S90QY Proizvođač: LG Sistem zvučnika: 5.1.3 Snaga: 570 W Garantni rok: 2 Godine 5.01 5.0

Šifra artikla: PCC 5099206023536 Logitech Z906, Speaker system 5.1 Home Theater, THX Digital Proizvođač Logitech Model Z-906 5.1 Digital THX Audio sistem 5.1 R. M. S. izlazna snaga 500W Frekventna karakteristika . Hz Kontrole na Digitalnom dekoderu Adapter za napajanje direltno na 220V Boja Crna Tip pakovanja Retail Garancija 24 meseca

KEF Q650c Centre Speaker is the essential accompaniment to the bookshelf and floorstanding models in KEF’s upgraded Q-Series. Sit back and enjoy a movie the way it was created to be relished, thanks to the intricately precise sound quality offered by a Uni-Q driver array and an improved crossover. Crystal Clean Bass A pristinely clean bass at high volumes is delivered by low-frequency drivers that showcase a larger roll surround and an updated suspension. Enhanced midrange clarity is ensured by an improved cone structure while an updated surround and rear suspension enhance the Auxillary Bass Radiator to offer impressive control and a better bass. Minimal Distortions The pressure on the Uni-Q midrange cone is minimised by the closed box midrange cabinet design, which results in a clear, detailed performance with a vibrant bass. Alongside this, the lower treble performance is enhanced by the inclusion of the damped tweeter loading tube which delivers a soft finish to sound made from the back of the tweeter. Q-Series' Signature Driver At the center of the reimagined Q-Series is the Uni-Q driver array. This pioneering creation situates the tweeter in the acoustic mid-point of the midrange and bass cone, which brings to life the acoustic dream of a single point source. As a result, you can luxuriate in an exquisitely accurate three-dimensional sound image that is dispersed evenly throughout the room. Like the other speakers in the Q-Series family, Uni- Q's super-wide dispersion is further improved by KEF's 'tangerine' waveguide over the tweeter dome. Tech Specs - Model: Q650c - Design: Two and a half-way bass reflex - Drive Units: 165mm (6.5in.) aluminium Uni-Q 25mm vented aluminium dome HF 165mm aluminium LF 165mm aluminium ABR - Frequency Range Free Field: 55Hz (-6dB) - Frequency Response: 64Hz-28kHz (±3dB) - Crossover Frequencies: 2.5kHz - Maximum Output: 110dB - Amplifier Requirements:15-150W - Sensitivity: 87dB (2.83V/1m) - Nominal Impedance: 8 Ohms (min.4.2 Ohms) - Dimensions (H x W x D): 210 x 629 x 304 mm 214 x 629 x 304 mm (with Rubber Feet) - Weight: 13.6kg - Unit Measurement: Piece

Proizvođač: Sony

JBL BOOMBOX 3 WI-FI Tip Zvučnik Snaga 1x 80W RMS-subwoofer + 2x 40W RMS-midrange +2x 20W RMS-tweeter (AC mode) 1x 60W RMS-subwoofer + 2x 30W RMS-midrange +2x 10W RMS-tweeter (Battery mode) Povezivanje Bluetooth, WiFi Dimenzije 48.2 x 25.7 x 20.0 9.62kg Boja crna Ostale karakteristike - Garancija 24 meseca

Tip: Aktivni Sistem: 2.1 Materijal kućišta: Plastika Povezivost: Bežični, Žični USB: 1 Kontrola jačine zvuka: Glasovna kontrola, Sonos app, Touch panel Podržane tehnologije: AirPlay2, Amazon Alexa, Sonos app, Sonos Voice Control Boja: Bela Pakovanje: Naponski kabl, Uputstvo za upotrebu Dimenzije: 260mm x 185mm x 160mm Dužina kabla: 2m Masa: 4.47kg Reklamacioni period: 24 meseca Naziv artikla: SONOS Era 300 Bežični zvučnik beli Naziv i vrsta robe: Zvučnici Uvoznik: Dostupno na ambalaži proizvoda Zemlja porekla: Dostupno na ambalaži proizvoda Prava potrošača: Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača Napomena: PB NITOM d.o.o. se trudi da cene, fotografije i opisi artikala budu što tačniji i kompletniji ali ne može da garantuje da su svi podaci apsolutno ispravni. Artikli predstavljeni na sajtu spadaju u našu ponudu i može se desiti da određeni proizvod nije trenutno dostupan. Sve cene su sa uračunatim PDV-om. Vaše ime Komentar Ocena: Pošalji KALKULATOR

Sistem: 1.0 Tip: Aktivni Frekventni opseg: 50Hz - 60Hz Podržane tehnologije: Trueplay™, WiFi Kontrola jačine zvuka: Bežični kontroler Napomena: Ethernet, LED indikator Dimenzije: 305mm x 230mm Boja: Crna Dužina kabla: 2m Pakovanje: Naponski kabl Masa: 6.35kg Reklamacioni period: 24 meseca Naziv artikla: SONOS Sub Mini Wireless zvučnik crni Naziv i vrsta robe: Zvučnici Uvoznik: Dostupno na ambalaži proizvoda Zemlja porekla: Dostupno na ambalaži proizvoda Prava potrošača: Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača Napomena: PB NITOM d.o.o. se trudi da cene, fotografije i opisi artikala budu što tačniji i kompletniji ali ne može da garantuje da su svi podaci apsolutno ispravni. Artikli predstavljeni na sajtu spadaju u našu ponudu i može se desiti da određeni proizvod nije trenutno dostupan. Sve cene su sa uračunatim PDV-om. Vaše ime Komentar Ocena: Pošalji KALKULATOR

Since 1961, KEF‘s mission has been to preserve the integrity of original sound with as little intervention as possible. The goal of every KEF product is to do one thing: provide you with a revealing listening experience that is as true to the original recording as is possible within the confines of your room. The iconic LS50 was the physical embodiment of this singular approach. A loudspeaker that took its cues from the classic LS3/5A but was quickly recognised as a modern icon in its own right. The LS50 was born out of KEF’s willingness to think outside the box, to constantly search for new materials, techniques and technologies such as the use of computer aided design and continuous enhancement of the KEF’s signature Uni-Q driver array. That was 2011, and time and technology have moved on. Since then our engineers have been upholding KEF’s driving philosophy and searching out new technological breakthroughs. The result is an icon in waiting : the KEF LS50 Meta Standmount Speakers. Instantly recognisable as the successor of the LS50, the LS50 Meta is born of the same KEF desire for continual development and is therefore fittingly the first loudspeaker to employ Metamaterial Absorption Technology. Revolutionary Sound Absorption with MAT A result of joint development with the Acoustic Metamaterials Group, using Metamaterial Absorption Technology (MAT) breaks completely new ground in loudspeaker design, and once again demonstrates KEF’s unrelenting passion for developing new technologies to improve your listening experience. Metamaterials are specially developed structures that use existing materials in such a way that they exhibit new, desirable properties that are simply not found in naturally occurring substances. A truly revolutionary tool in the KEF acoustic armoury, MAT is a highly complex maze-like structure, where each of the intricate channels efficiently absorbs a specific frequency. When combined, the channels act as an acoustic black hole, absorbing 99% of the unwanted sound that comes from the rear of the tweeter, eliminating the resulting distortion and providing a purer, more natural acoustic performance 12th Generation Uni-Q With MAT Delivers The tweeter in question sits at the heart of our 12th generation Uni-Q with MAT driver array. The Uni-Q point source configuration delivers a more detailed, accurate and integrated three-dimensional sound image, which is dispersed so evenly throughout the room that the ‘sweet spot’ is wherever you are in the room. Using simulation and analysis tools and decades of accumulated in-house knowledge, our engineers have developed a new iteration of KEF’s signature driver array, with a new cone neck decoupler and motor system that is precisely shaped to reduce high-frequency distortion in the mid-frequency driver. The result is reduced coloration, less distortion and a sound that is more transparent and life-like than previously possible. The same can also be said of bass performance, where LS50 Meta completely exceeds the expectations of a modestly proportioned standmount speaker to deliver room-filling sound with deep, articulate bass. Enhancement From LS50 Lineage Much of the engaging performance is thanks to the clarity of the driver array, but the port design is also crucial. Using Computational Fluid Dynamics (CFD), the flare and profile of the LS50 Meta’s patented off-set flexible port is calculated to delay the onset of turbulence and the flexible port walls prevent resonances from colouring the midrange. This leads to improved clarity, with exceptional levels of depth and detail. The LS50 Meta’s extremely rigid cabinet is optimised for the best performance, with smooth curved surfaces that help radiate sound out across the baffle without any interference. The baffle itself is engineered from an injection-moulded Dough Moulding Compound (DMC) usually found in the automotive industry. Inside the cabinet, cross bracing and Constrained Layer Damping (CLD) combine to deaden internal vibrations. The result of such meticulous attention to detail is that LS50 Meta produces the lowest coloration of any speaker in its class. Attention To Every Detail The LS50 Meta has inherited its distinctive good looks from the original LS50, with its low-diffraction, curved baffle precision modelled around the Uni-Q driver array. The curved front is subtly mirrored by the gently radiused rear panel, while both the port exit and speaker terminals have been elegantly recessed and softened visually. On the LS50 Meta’s underside, each corner has a threaded inset allowing the speaker to lock onto the top of the new KEF S2 Floor Stand, which also boasts integrated cable management and a mass-loadable column. LS50 Meta is available at launch in four colours, all of which benefit from a modern silky matte finish, while the S2 Floor Stands are colour matched to the models. The LS50 Meta Standmount Loudspeakers deliver on every aspect of the KEF promise. A genuine industry first, LS50 Meta utilises innovative, ground-breaking technology to provide you with an immersive, completely believable sound from a compact, stylish loudspeaker that is destined to open up whole new vistas of enjoyment in your life. Metamaterial Absorption Technology - eliminates 99% of high-frequency distortion for pure, natural sound 12th generation Uni-Q - with MAT driver array for exceptional acoustic accuracy Driver Performance Optimisation - for enhanced sonic performance, less distortion and reduced coloration Patented off-set flexible port - for reduced midrange coloration with exceptional levels of depth and detail Optimised cabinet design - for best acoustic performance With mounting inserts - to secure on KEF S2 Floor Stand (available as separate item) Model LS50 Meta Design Two-way bass reflex Drive units Uni-Q Driver Array HF: 25 mm (1 in.) vented aluminium dome with Metamaterial Absorption Technology MF/LF: 130 mm (5.25 in.) aluminium cone Crossover frequency 2.1 kHz Frequency range (-6dB) 47 Hz - 45 kHz Typical in-room bass response (-6dB) 26 Hz Frequency response (±3dB) 79 Hz - 28 kHz Harmonic distortion (90dB, 1m) <0.4% 175 Hz - 20 kHz <0.1% 300 Hz - 10 kHz Maximum output 106 dB Amplifier power (recommended) 40-100 W Nominal impedance 8 Ω (min. 3.5 Ω) Sensitivity (2.83V/1m) 85 dB Weight 7.8 kg (17.2 lbs.) Dimension (H x W x D) with terminals 302 x 200 x 280.5mm

PSB Dvosistemske Bookshelf High End Zvučne Kutije Platinum M2 Snage 2x15/200 wati, na 4 oma Visina 40 Sirina 24 Dubina 33 Jeftine su zato što na nekoliko mesta postoje okrznuća furnira, koja ćete videti na slikama velike rezolucije. Sem toga, dobro očuvane, što ćete takodje videti na slikama velike rezolucije Generalno, ako ste esteta preskočite ih. I ovako uopšteno.. Ne žurite sa kupovinom, uzeo sam ih prvenstveno sebe radi, da ih ja slušam malo :) . Tako da, polako sa odlukom Što se samog modela tiče, imate mnogo toga o njima na internetu. Ako ste zainteresovani, nemojte da Vas mrzi da proguglate, videćete cene, ocene, od čega, i kako su napravljeni, koja je zamisao inženjera bila, kao i sve ostalo o njima Ukratko.. U pravom smislu reči High End (visoka klasa) fenomenalnog zvuka Specifications Platinum M2 2-driver, 2-way, ported-box, magnetically shielded speaker Drivers: 1` aluminum-dome tweeter, 6.5` woven fiberglass cone bass/midrange Frequency range: 48Hz–33kHz, +/-3dB (on-axis, anechoic) Impedance: 4ohms nominal, minimum Crossover: 2.2kHz Recommended amplification: 15–200W RMS (clipping <10% time) Sensitivity: 88dB anechoic, 90dB typical in-room (2.83V @ 1m) Dimensions: 15.5` x 9.3` x 12.8` (HxWxD) Weight: 27 lbs Price: $1999/pair (plus $449 each for 24` stands) Platinum C4 5-driver, 3-way, ported-box, magnetically shielded center-channel speaker Drivers: 1` aluminum-dome tweeter, two 3` woven fiberglass cone midranges, two 6.5` woven fiberglass cone woofers Frequency range: 45Hz–33kHz, +/-3dB (on-axis, anechoic) Impedance: 4ohms nominal, minimum Crossovers: 500Hz, 2.2kHz Recommended amplification: 15–200W RMS (clipping <10% time) Sensitivity: 90dB anechoic, 92dB typical in-room (2.83V @ 1m) Dimensions: 9.3` x 33` x 12.8` (HxWxD) Weight: 49 lbs Price: $1999 each

Since 1961, KEF‘s mission has been to preserve the integrity of original sound with as little intervention as possible. The goal of every KEF product is to do one thing: provide you with a revealing listening experience that is as true to the original recording as is possible within the confines of your room. The iconic LS50 was the physical embodiment of this singular approach. A loudspeaker that took its cues from the classic LS3/5A but was quickly recognised as a modern icon in its own right. The LS50 was born out of KEF’s willingness to think outside the box, to constantly search for new materials, techniques and technologies such as the use of computer aided design and continuous enhancement of the KEF’s signature Uni-Q driver array. That was 2011, and time and technology have moved on. Since then our engineers have been upholding KEF’s driving philosophy and searching out new technological breakthroughs. The result is an icon in waiting : the KEF LS50 Meta Standmount Speakers. Instantly recognisable as the successor of the LS50, the LS50 Meta is born of the same KEF desire for continual development and is therefore fittingly the first loudspeaker to employ Metamaterial Absorption Technology. Revolutionary Sound Absorption with MAT A result of joint development with the Acoustic Metamaterials Group, using Metamaterial Absorption Technology (MAT) breaks completely new ground in loudspeaker design, and once again demonstrates KEF’s unrelenting passion for developing new technologies to improve your listening experience. Metamaterials are specially developed structures that use existing materials in such a way that they exhibit new, desirable properties that are simply not found in naturally occurring substances. A truly revolutionary tool in the KEF acoustic armoury, MAT is a highly complex maze-like structure, where each of the intricate channels efficiently absorbs a specific frequency. When combined, the channels act as an acoustic black hole, absorbing 99% of the unwanted sound that comes from the rear of the tweeter, eliminating the resulting distortion and providing a purer, more natural acoustic performance 12th Generation Uni-Q With MAT Delivers The tweeter in question sits at the heart of our 12th generation Uni-Q with MAT driver array. The Uni-Q point source configuration delivers a more detailed, accurate and integrated three-dimensional sound image, which is dispersed so evenly throughout the room that the ‘sweet spot’ is wherever you are in the room. Using simulation and analysis tools and decades of accumulated in-house knowledge, our engineers have developed a new iteration of KEF’s signature driver array, with a new cone neck decoupler and motor system that is precisely shaped to reduce high-frequency distortion in the mid-frequency driver. The result is reduced coloration, less distortion and a sound that is more transparent and life-like than previously possible. The same can also be said of bass performance, where LS50 Meta completely exceeds the expectations of a modestly proportioned standmount speaker to deliver room-filling sound with deep, articulate bass. Enhancement From LS50 Lineage Much of the engaging performance is thanks to the clarity of the driver array, but the port design is also crucial. Using Computational Fluid Dynamics (CFD), the flare and profile of the LS50 Meta’s patented off-set flexible port is calculated to delay the onset of turbulence and the flexible port walls prevent resonances from colouring the midrange. This leads to improved clarity, with exceptional levels of depth and detail. The LS50 Meta’s extremely rigid cabinet is optimised for the best performance, with smooth curved surfaces that help radiate sound out across the baffle without any interference. The baffle itself is engineered from an injection-moulded Dough Moulding Compound (DMC) usually found in the automotive industry. Inside the cabinet, cross bracing and Constrained Layer Damping (CLD) combine to deaden internal vibrations. The result of such meticulous attention to detail is that LS50 Meta produces the lowest coloration of any speaker in its class. Attention To Every Detail The LS50 Meta has inherited its distinctive good looks from the original LS50, with its low-diffraction, curved baffle precision modelled around the Uni-Q driver array. The curved front is subtly mirrored by the gently radiused rear panel, while both the port exit and speaker terminals have been elegantly recessed and softened visually. On the LS50 Meta’s underside, each corner has a threaded inset allowing the speaker to lock onto the top of the new KEF S2 Floor Stand, which also boasts integrated cable management and a mass-loadable column. LS50 Meta is available at launch in four colours, all of which benefit from a modern silky matte finish, while the S2 Floor Stands are colour matched to the models. The LS50 Meta Standmount Loudspeakers deliver on every aspect of the KEF promise. A genuine industry first, LS50 Meta utilises innovative, ground-breaking technology to provide you with an immersive, completely believable sound from a compact, stylish loudspeaker that is destined to open up whole new vistas of enjoyment in your life. Metamaterial Absorption Technology - eliminates 99% of high-frequency distortion for pure, natural sound 12th generation Uni-Q - with MAT driver array for exceptional acoustic accuracy Driver Performance Optimisation - for enhanced sonic performance, less distortion and reduced coloration Patented off-set flexible port - for reduced midrange coloration with exceptional levels of depth and detail Optimised cabinet design - for best acoustic performance With mounting inserts - to secure on KEF S2 Floor Stand (available as separate item) Model LS50 Meta Design Two-way bass reflex Drive units Uni-Q Driver Array HF: 25 mm (1 in.) vented aluminium dome with Metamaterial Absorption Technology MF/LF: 130 mm (5.25 in.) aluminium cone Crossover frequency 2.1 kHz Frequency range (-6dB) 47 Hz - 45 kHz Typical in-room bass response (-6dB) 26 Hz Frequency response (±3dB) 79 Hz - 28 kHz Harmonic distortion (90dB, 1m) <0.4% 175 Hz - 20 kHz <0.1% 300 Hz - 10 kHz Maximum output 106 dB Amplifier power (recommended) 40-100 W Nominal impedance 8 Ω (min. 3.5 Ω) Sensitivity (2.83V/1m) 85 dB Weight 7.8 kg (17.2 lbs.) Dimension (H x W x D) with terminals 302 x 200 x 280.5mm

LG SN10Y Proizvođač: LG Sistem zvučnika: 5.1.2 Snaga: 570 W Način povezivanja: Bluetooth Garantni rok: 2 Godine 4.01 4.0

Proizvođač Sony Model MHCV73D.CEL Garancija Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača Boja Crna Mikrofon Da Napajanje Strujno Dimenzije (Š x V x D) 428 x 921 x 370 mm Koncepcija Bluetooth Težina 21.2 kg Čitač kartice Ne

LG S80QR Soundbar zvučnik Tip Soundbar zvučnik Snaga Ukupna snaga: 620 W Snaga prednjih zvučnika: 2 x 45 W Snaga centralnog zvučnika: 40 W Snaga niskotonca: 220 W Povezivanje USB: Da Optički izlaz: Da HDMI Ulaz: 1 HDMI Izlaz: 1 Wi-Fi: Da Bluetooth: Da Dimenzije Dimenzije glavne jedinice: 100 x 6.3 x 13.5 cm Dimenzije niskotonca: 20.2 x 40.7 x 40.3 cm Boja Crna Ostalo Audio karakteristike 4K zvuk - 24bit / 96 kHz 4K zvuk poboljšivač rezolucije - 24bit / 96 kHz Cinema/DTS Virtual X MERIDIAN Tone control - User EQ Noćni režim Auto Volume Leveler Dynamic Range Control Formati LPCM Dolby Atmos Dolby TrueHD Dolby Digital Plus Dolby Digital DTS Digital Surround DTS Virtual X FLAC OGG WAV MP3 WMA AAC / AAC+ Ostale karakteristike Hi-Res Audio ALLM (automatski režim niskog kašnjenja) VRR (promenljiva brzina osvežavanja) AI Room Calibration Garancija 24 meseca

SONY MHCV73D.CEL SONY MHCV73D.CEL Audio sistem velike snage Višesmerni zvuk za zabavu Višesmerno svetlo za zabavu i svetlo na zvučniku Plejlista za zabavu i Karaoke Ranking uz Fiestable Integrisani DVD plejer sa HDMI™ izlazom Kontrola pokretom za zabavno i lako upravljanje Funkcije: CD, DVD, USB 1, FM, TV (HDMI, audio in), BLUETOOTH Uparivanje pomoću NFC povezivanja jednim dodirom Bluetooth LDAC/AVRCP/AAC/SPP/A2DP (SINK) Kompatibilne aplikacije za pametne telefone: da (Sony | Music Center i Fiestable) Visokotonac: 4 cm x 4 (veoma efikasan trubasti) Srednjetonac: 8 cm x 2 (veoma efikasni trubasti napred i pozadi) Niskotonac: 30 cm x 1 Podržani diskovi: - CD/CD-R/CD-RW - DVD/DVD+R/DVD-R/DVD+R DL/DVD+RW/DVD-RW (VIDEO)/VCD Podržani formati: MP3, XVID, MPEG4 simple profile (podržava i MPEG1) Ulazni i izlazni priključci: - HDMI izlaz x 1 - USB ulaz x 1 - Analogni audio ulaz - MIC/GIT x 2 Funkcije za zvuk - Muzika (Emotion EQ) - DSEE Poboljšavanje zvuka: DSEE (AUTO) - Fudbalski režim - Wireless party chain putem BLUETOOTH veze - video ekvilajzer: film/igra/drama/vesti - CLEARAUDIO+ - Režim fiesta - funkcija BASS BOOST: MEGA BASS Surround: DOLBY® DIGITAL Efekti: - flanžer - wah - izolator - sempler - pomeranje - taiko Svetlosni efekat: - svetlosni efekti zvučnika: da (plava za WF i srednji opseg) - svetlosni efekti za zabavu: da (360°svetlo za zabavu, luk: tamnoplava/svetloplava/zelena, pruga: više boja) Karaoke: - utišavanje glasa - kontrolni taster - ocenjivanje - jačina mikrofona - eho - glasovni vodič: da (samo aplikacije) - promena glasa Praktične funkcije: - upravljanje pokretima - tasteri osetljivi na dodir (otpornost na prskanje za gornju ploču) - merač vremena za isključivanje - USB snimanje - izlazni USB priključak za punjenje Tjuner: - frekventni pojas: FM/DAB - RDS - raspon podešavanja (FM): 87,5–108 MHz/50 kHz - memorisani kanali: FM20/DAB20 Tanjir ključ Blokada za decu Zaključavanje tokom zabave Ručka za nošenje: da (pozadi i sa strane) Točkići Širina: 428 mm Dubina: 370 mm Visina: 921 mm Težina: 21,2 kg Boja: crna

The APart SUB2400 is a Tandem Driven passive bandpass subwoofer. It completes your sound with an incredible deep and loud kick-bass. The cabinet is made out of MDF wood. This subwoofer has two bandpass chambers where each chamber is equipped with a 10” dual coil woofer. Together with the push-pull technology this results in a relative small cabinet with a huge output and very low distortion. Thanks to the small size of the woofers, less mass has to be moved. Therefore, the bass reproduction is a lot more “punchy” and “quicker” compared to 15” or 18” cabinets. The SUB2400 has been compared with a single 15” (150 liter) and 18” (200 liter) subwoofer and the results were astonnishing in favour of the SUB-2400! The APart SUB2400 has great power handling and an extreme transient response. This subwoofer can be driven in 4 Ohm or 16 Ohm mode. Selection is done by the big switch at the back of the subwoofer. Especially with long cable runs, the 16 ohm mode is advised. Less power is lost and the bass response will be a lot better. The 16 Ohm mode also allows you to use multiple cabinets. Together with the MASK6 or MASK8 cabinet speakers and the 3 channel amplifier (PUBDRIVE2000) you get a perfect and fail-safe sound system that is suitable for bars, pubs, clubs, restaurants, taverns, ..., Where often “dance level” music is required. Type : Passive opti-tuned bandpass Cabinet : MDF Wood Woofer : 2 x 10” long Xmax Impedance : Dual coil; 2 x 8 Ohm Rockerswitch up: 4 Ohm Rockerswitch down: 16 Ohm RMS Power : AES Rated : 2 x 300 watt Music Program : 2 x 400 watt Dynamic Peak : 2 x 600 watt Protection : Auto Reset SPL 1 watt/1M : 99 dB SPL max : 133 dB Freq. range : 45 - 150 Hz Inputs : 1 x speakon 16 Ohm or link 4 Ohm by switch 1 speakon link Dimensions : 700 x 345 x 352 mm Weight : 30.4 Kg

JBL Subwoofer i bluetooth zvučnik BASS PRO GO Tip Subwoofer i bluetooth Snaga 100 W Povezivanje Bluetooth Frekvencijski odziv 40 - 20.000 Hz Boja Crna Ostale karakteristike JBL BassPro Go predstavlja zvučnik koji je dizajniran da se lako poveže na bilo koje vozilo, dajući bogatiji zvuk u nižim frekvencijama sa mogućnošću da se lako diskonektuje i koristi kao bluetooth zvučnik. Zahvaljujući zaštiti IPx5, možete ga koristiti na otvorenom, bez bojazni od kiše. Bluetooth domet na otvorenom prostoru: do 38m Bluetooth u zatvorenom prostoru: do 10m Povezivanje do 3 uređaja preko bluetooth konekcije Baterija: NiMH, 10.8V/3000mAH Punjenje: USB 2.0, 5V (2.1A) Garancija 2 godine Zagarantovana sva prava po Zakonu o zaštiti potrošača. Tačan podatak o uvozniku i zemlji porekla je naveden na deklaraciji proizvoda.

Continuous Curved Cone™ First seen in Q Acoustics’ flagship Concept speaker range and now brought to the 5000 series, the Continuous Curved Cone (CCC) design addresses limitations arising from straight and flared cones. Thorough multi-disciplinary research and development aimed to blend the most desirable characteristics of both the straight cone’s bass character and the flared cone’s mid-range control. Computer modeling was used to create the CCC profile which best combined these traits. The result is a drive unit with superior dispersion, frequency and amplitude linearity. Moreover, the CCC is more resilient to modulation by standing waves within the cabinet. Better, tighter bass with more dynamic range and detail means you can be more flexible with speaker placement and still achieve fantastic results. Contemporary Baffled Cabinet Design The minimalist design of the 5040 speakers is reminiscent of the latest Concept speaker series from the brand. Baffle fronts are laminated with a layer of butyl rubber and black acrylic trim, not only providing a damping layer to suppress baffle vibrations but also creating an eye-catching contrast to the surrounding satin and wood finishes available in this series. The cabinets are constructed from 20mm MDF for the larger cabinets in the series. Baffles across all models are made with 25mm HDF for greater durability. The lightweight open-frame grille design maximises transparency and is attached using bonded trim and magnetic fixings for an attractive visual and acoustic display. The tower models also come with adjustable spikes and protective spike covers as a preventative measure against floor damage. Anodized aluminium stabilisers with top-adjustable spikes make levelling simple. Helmhotz Pressure Equalisers™ Q Acoustics has equipped the 5040 and 5050 floorstanding speakers with HPE™ (Helmholtz Pressure Equalizer) technology to address cabinet resonance issues which often plague taller loudspeakers. By converting pressure to velocity, this technology reduces the overall pressure gradient within the enclosure, which helps prevent the speakers from resonating at a single, problematic frequency. P2P™ Bracing The Q Acoustics 5040 floorstanding speakers have been designed with P2P™ (Point to Point) bracing technology. Unlike conventional bracing systems, P2P bracing is tailored to support the specific parts of the enclosure that require stiffening without transferring unwanted energy or exacerbating cabinet structure modality. This ensures that the speakers are exceptionally rigid, thereby improving the focus of stereo imaging and giving the soundstage greater accuracy. The P2P bracing system is a result of careful engineering by the design team at Q Acoustics who have only applied it in exactly the right places to effectively and efficiently reduce cabinet resonances. Crossover Q Acoustics' new 5040 floorstanding speakers feature modified 2nd order crossovers with a 2.5 kHz crossover point. All models in the 5000 series, including the 5040, have a nominal load impedance of 6 Ohms and use high-quality components in their crossover, including metallized polyester film capacitors, low saturation air core inductors, and bifilar wound wire-wound resistors to minimize parasitic inductance. What’s in the Box? Q Acoustics Q 5040 Compact Floorstanding Speakers Adjustable spikes Protective spike covers Aluminium stabilisers Documentation Bass unit 2 x 125 mm (5.0 in) Treble unit 1 x 25 mm (1.0 in) Frequency response (-6dB) 39 Hz - 30 kHz Nominal impedance 6 Ω Minimum impedance 3.0 Ω Sensitivity (2.83V @ 1kHz) 91.5 dB/w/m Recommended amplifier power 25-150 W Crossover frequency 2.5 kHz Effective volume 27 L Dimensions (per loudspeaker / H x W x D) 967 x 361 x 293 mm (including spikes and stabiliser) Weight (per loudspeaker) 18.0 kg (39.7 lbs)

Since 1961, KEF‘s mission has been to preserve the integrity of original sound with as little intervention as possible. The goal of every KEF product is to do one thing: provide you with a revealing listening experience that is as true to the original recording as is possible within the confines of your room. The iconic LS50 was the physical embodiment of this singular approach. A loudspeaker that took its cues from the classic LS3/5A but was quickly recognised as a modern icon in its own right. The LS50 was born out of KEF’s willingness to think outside the box, to constantly search for new materials, techniques and technologies such as the use of computer aided design and continuous enhancement of the KEF’s signature Uni-Q driver array. That was 2011, and time and technology have moved on. Since then our engineers have been upholding KEF’s driving philosophy and searching out new technological breakthroughs. The result is an icon in waiting : the KEF LS50 Meta Standmount Speakers. Instantly recognisable as the successor of the LS50, the LS50 Meta is born of the same KEF desire for continual development and is therefore fittingly the first loudspeaker to employ Metamaterial Absorption Technology. Revolutionary Sound Absorption with MAT A result of joint development with the Acoustic Metamaterials Group, using Metamaterial Absorption Technology (MAT) breaks completely new ground in loudspeaker design, and once again demonstrates KEF’s unrelenting passion for developing new technologies to improve your listening experience. Metamaterials are specially developed structures that use existing materials in such a way that they exhibit new, desirable properties that are simply not found in naturally occurring substances. A truly revolutionary tool in the KEF acoustic armoury, MAT is a highly complex maze-like structure, where each of the intricate channels efficiently absorbs a specific frequency. When combined, the channels act as an acoustic black hole, absorbing 99% of the unwanted sound that comes from the rear of the tweeter, eliminating the resulting distortion and providing a purer, more natural acoustic performance 12th Generation Uni-Q With MAT Delivers The tweeter in question sits at the heart of our 12th generation Uni-Q with MAT driver array. The Uni-Q point source configuration delivers a more detailed, accurate and integrated three-dimensional sound image, which is dispersed so evenly throughout the room that the ‘sweet spot’ is wherever you are in the room. Using simulation and analysis tools and decades of accumulated in-house knowledge, our engineers have developed a new iteration of KEF’s signature driver array, with a new cone neck decoupler and motor system that is precisely shaped to reduce high-frequency distortion in the mid-frequency driver. The result is reduced coloration, less distortion and a sound that is more transparent and life-like than previously possible. The same can also be said of bass performance, where LS50 Meta completely exceeds the expectations of a modestly proportioned standmount speaker to deliver room-filling sound with deep, articulate bass. Enhancement From LS50 Lineage Much of the engaging performance is thanks to the clarity of the driver array, but the port design is also crucial. Using Computational Fluid Dynamics (CFD), the flare and profile of the LS50 Meta’s patented off-set flexible port is calculated to delay the onset of turbulence and the flexible port walls prevent resonances from colouring the midrange. This leads to improved clarity, with exceptional levels of depth and detail. The LS50 Meta’s extremely rigid cabinet is optimised for the best performance, with smooth curved surfaces that help radiate sound out across the baffle without any interference. The baffle itself is engineered from an injection-moulded Dough Moulding Compound (DMC) usually found in the automotive industry. Inside the cabinet, cross bracing and Constrained Layer Damping (CLD) combine to deaden internal vibrations. The result of such meticulous attention to detail is that LS50 Meta produces the lowest coloration of any speaker in its class. Attention To Every Detail The LS50 Meta has inherited its distinctive good looks from the original LS50, with its low-diffraction, curved baffle precision modelled around the Uni-Q driver array. The curved front is subtly mirrored by the gently radiused rear panel, while both the port exit and speaker terminals have been elegantly recessed and softened visually. On the LS50 Meta’s underside, each corner has a threaded inset allowing the speaker to lock onto the top of the new KEF S2 Floor Stand, which also boasts integrated cable management and a mass-loadable column. LS50 Meta is available at launch in four colours, all of which benefit from a modern silky matte finish, while the S2 Floor Stands are colour matched to the models. The LS50 Meta Standmount Loudspeakers deliver on every aspect of the KEF promise. A genuine industry first, LS50 Meta utilises innovative, ground-breaking technology to provide you with an immersive, completely believable sound from a compact, stylish loudspeaker that is destined to open up whole new vistas of enjoyment in your life. Metamaterial Absorption Technology - eliminates 99% of high-frequency distortion for pure, natural sound 12th generation Uni-Q - with MAT driver array for exceptional acoustic accuracy Driver Performance Optimisation - for enhanced sonic performance, less distortion and reduced coloration Patented off-set flexible port - for reduced midrange coloration with exceptional levels of depth and detail Optimised cabinet design - for best acoustic performance With mounting inserts - to secure on KEF S2 Floor Stand (available as separate item) Model LS50 Meta Design Two-way bass reflex Drive units Uni-Q Driver Array HF: 25 mm (1 in.) vented aluminium dome with Metamaterial Absorption Technology MF/LF: 130 mm (5.25 in.) aluminium cone Crossover frequency 2.1 kHz Frequency range (-6dB) 47 Hz - 45 kHz Typical in-room bass response (-6dB) 26 Hz Frequency response (±3dB) 79 Hz - 28 kHz Harmonic distortion (90dB, 1m) <0.4% 175 Hz - 20 kHz <0.1% 300 Hz - 10 kHz Maximum output 106 dB Amplifier power (recommended) 40-100 W Nominal impedance 8 Ω (min. 3.5 Ω) Sensitivity (2.83V/1m) 85 dB Weight 7.8 kg (17.2 lbs.) Dimension (H x W x D) with terminals 302 x 200 x 280.5mm

Full Description C3 Continuous Curved Cone Design Expertly engineered, the 4.5" C3 Continuous Curved Cone™ mid/bass driver mixes a thumping bass performance, with exceptional high/mid-range frequency control. The curved design enables excellent sound dispersion, a wide-reaching 56Hz - 30 kHz frequency response, and reduces distortion to keep your music clear. Precise Driver Performance To ensure optimal audio performance, the mid/bass driver is equipped with intricate magnets that are coupled to large voice coils which amplifies the motor's power. This increases power handling by up to 50 and transmits robust audio signals. The Q 5010 produces a premium bass response through the bass reflex design and brings extra aural detail to your HiFi and Home Cinema system. Dynamic Tweeter The 1" tweeter is hermetically sealed and reduces any resonance to create a clean playback sound. Isolated from the baffle, the tweeter is safeguarded from internal pressure modulations so you can hear your favourite songs as the musician intended. With reduced distortion, this tweeter helps to boost the output of the Q Acoustics Q 5010 and creates a thrilling listening experience. Excellent Construction Engineered with precision, the Q 5010 offers a polished modern design that is vastly durable. The dark acrylic baffle motif mirrors the Q 5010 speakers' minimalist design very well and helps to provide an immersive acoustic performance. Making these speakers, perfect for creating an enveloping soundstage. Point-2-PointTM (P2P) Bracing Continuing the dynasty of Q Acoustics flagship models, the Q 5010 is equipped with Point-2-PointTM (P2P) bracing. The bracing offers exceptional enclosure rigidity and reduces lower-frequency vibrations. The Point-2-PointTM technology elevates the focus of the stereo image to produce a great sound. Optimal Connectivity The Q 5010 speakers house two metal securing nuts to offer connectivity to 4mm wires, plugs or spade tags. These securing nuts also offer low contact resistance to ensure flawless audio transmission. The Q 5010 speakers will create a room-filling sound you will not want to switch off. Key Features 4.5" C3 Continuous Curved Cone™ mid/bass driver creates an immersive, deep sound 1" tweeter produces sharp frequencies The tweeter is isolated from the baffle to reduce sound interference Intricate magnets coupled with large voice coils provide great power handling 56Hz - 30 kHz frequency response enables a varied sound output Bass reflex design gifts you with a detailed bass response Dark acrylic baffle motif mirrors offer a world-class acoustic performance Point-2-PointTM (P2P) bracing minimises lower-frequency vibrations Two metal securing nuts provide great connectivity to your amplifier Bass unit 1 x 110 mm (4.5 in) Treble unit 1 x 25 mm (1.0 in) Frequency response(-6dB) 56Hz - 30 kHz Nominal impedance 6 Ω Minimum impedance 3.3 Ω Sensitivity (2.83V @ 1kHz) 86.3 dB/w/m Recommended amplifier power 15-90 W Crossover frequency 2.5 kHz Effective volume 5.0 L Dimensions (per loudspeaker / H x Wx D) 264 x 160 x 263 mm Weight (per loudspeaker) 5.6 kg

SONOS SUB MINI Bežični zvučnik crni Saznaj više SONOS SUB MINI Bežični zvučnik crni