Induktivni senzor za detekciju metalnih predmeta. Karakteristike: - Oznaka: LJ30A3-15-Z/BX - Prečnik senzora: 30 mm - Napon napajanja: 6-36 V DC - Izlaz: 300 mA - 3 žice - Polaritet: NPN - Dimenzije: M30 x 80 x 47 mm - Dužina kabla za konekciju: 110 cm - Distanca detekcije: 15 mm - Status senzora: NO (normalno otvoren) - Objekat za detekciju: indukcioni 30x30x1mm - Radna temperatura: -25~75 ° C - Otpor izolacije: ≥ 50 MΩ - Materijal kučišta: Metal - Stepen zaštite: IP67 Povezivanje: - braon - napajanje, + polaritet - plava - napajanje, masa, - polaritet - crna - izlaz - prilikom nailaska objekta na izlazu se pojavljuje - polaritet ulaznoga napona napajanja, masa

Induktivni senzor za detekciju metalnih predmeta. Karakteristike: - Oznaka: LJ30A3-15-Z/AY - Prečnik senzora: 30 mm - Napon napajanja: 6-36 V DC - Izlaz: 300 mA - 3 žice - Polaritet: PNP - Dimenzije: M30 x 80 x 47 mm - Dužina kabla za konekciju: 110 cm - Distanca detekcije: 15 mm - Status senzora: NC (normalno zatvoren) - Objekat za detekciju: indukcioni 30x30x1mm - Radna temperatura: -25~75 ° C - Otpor izolacije: ≥ 50 MΩ - Materijal kučišta: Metal - Stepen zaštite: IP67 Povezivanje: - braon - napajanje, + polaritet - plava - napajanje, masa, - polaritet - crna - izlaz - prilikom nailaska objekta na izlazu se prekida + polaritet ulaznoga napona napajanja

MB osigurač MB 36 Unutrašnji prečnik KM matice ili MB osigurača u mm dobija se tako što se broj koji sadrži oznaka pomnoži sa 5. Na primer: za KM 4 unutrašnji prečnik je 4 x 5=20 mm. Izuzeci od ovog pravila su: KM 0=10 mm, KM 1=12 mm, KM 2 =15 mm i KM 3 =17 mm

Induktivni senzor za detekciju metalnih predmeta. Karakteristike: - Model: LJ8A3-2-Z/EX - Prečnik senzora: 8 mm - Napon napajanja: 6-36 V DC - Izlaz: 300 mA - 2 žice - Dimenzije: M8 x 15 x 50 mm - Dužina kabla za konekciju: 110 cm - Distanca detekcije: 2 mm - Status senzora: NO (normalno otvoren) - Objekat za detekciju: indukcioni 8x8x1mm - Radna temperatura: -25~75 °C - Otpor izolacije: ≥ 50 MΩ - Materijal kučišta: Metal - Stepen zaštite: IP67

Induktivni senzor za detekciju metalnih predmeta. Karakteristike: - Oznaka: LJ8A3-2-Z/AX - Prečnik senzora: 8 mm - Napon napajanja: 6-36 V DC - Izlaz: 300 mA - 3 žice - Polaritet: NPN - Dimenzije: M8 x 15 x 50 mm - Dužina kabla za konekciju: 110 cm - Distanca detekcije: 2 mm - Status senzora: NC (normalno zatvoren) - Objekat za detekciju: indukcioni 8x8x1mm - Radna temperatura: -25~75 °C - Otpor izolacije: ≥ 50 MΩ - Materijal kučišta: Metal - Stepen zaštite: IP67 Povezivanje: - braon - napajanje, + polaritet - plava - napajanje, masa, - polaritet - crna - izlaz - prilikom nailaska objekta na izlazu se prekida - polaritet (masa) ulaznoga napona napajanja

Induktivni senzor za detekciju metalnih predmeta. Karakteristike: - Model: LJ8A3-2-Z/AY - Prečnik senzora: 8 mm - Napon napajanja: 6-36 V DC - Izlaz: 300 mA - 3 žice - Polaritet: PNP - Dimenzije: M8 x 15 x 50 mm - Dužina kabla za konekciju: 110 cm - Distanca detekcije: 2 mm - Status senzora: NC (normalno zatvoren) - Objekat za detekciju: indukcioni 8x8x1mm - Radna temperatura: -25~75 °C - Otpor izolacije: ≥ 50 MΩ - Materijal kučišta: Metal - Stepen zaštite: IP67 Povezivanje: - braon - napajanje, + polaritet - plava - napajanje, masa, - polaritet - crna - izlaz - prilikom nailaska objekta na izlazu se prekida + polaritet ulaznoga napona napajanja

Senzor protoka vode - merač - protokomer 1-30 L/min za arduino i slicne sisteme. Karakteristike: - Radni napon: DC 5~18 V - Maksimalna struja: 15 mA (DC 5V) - Navoj: 1/2`` - Model: ZF-S201 - Maksimalni pritisak vode: 1.75 Mpa (17.5 bar-a) - Vlažnost vazduha: 35~90 %RH (bez leda) - Radna temperatura: -25~80 ℃ - Dimenzije: 61 x 36 x 34 mm Povezivanje: crvena(+), crna(-), žuta (impulsni izlaz) Na izlazu se pojavljuje povorka impulsa zavisno od protoka, više impulsa u minutu. Broj impulsa (frekvencija) = 7.5 x Q Q - protok u litrima (2L/min=15Hz; 4L/min=30Hz; ...)

Induktivni senzor za detekciju metalnih predmeta. Karakteristike: - Oznaka: LJ8A3-2-Z/BY - Prečnik senzora: 8 mm - Napon napajanja: 6-36 V DC - Izlaz: 300 mA - 3 žice - Polaritet: PNP - Dimenzije: M8 x 15 x 50 mm - Dužina kabla za konekciju: 110 cm - Distanca detekcije: 2 mm - Status senzora: NO (normalno otvoren) - Objekat za detekciju: indukcioni 8x8x1mm - Radna temperatura: -25~75 °C - Otpor izolacije: ≥ 50 MΩ - Materijal kučišta: Metal - Stepen zaštite: IP67 Povezivanje: - braon - napajanje, + polaritet - plava - napajanje, masa, - polaritet - crna - izlaz - prilikom nailaska objekta na izlazu se pojavljuje + polaritet ulaznoga napona napajanja

PWM regulator brzine obrtanja motora jednosmerne struje (DC) Reguliše se potenciometrom od nulte do maksimalne brzine i poseduje prekidač i displej koji pokazuje u procentima brzinu od nulte (0%) do maksimalne (100%). Karakteristike: - Ulaz: 6 - 36 V - Normalna struja: 5 A - Maksimalna struja: 10 A - Modulacija upravljanja: PWM (širinsko-impulsna) - Zadrzavanje istog obrtnog momenta motora na malom broju obrtaja - Zaštita od pogrešnog kačenja - Zaštita od preopterećenja - Frekvencija upravljanja: 16 KHz - Dimenzija uređaja: 78 x 42 x 25 mm - Dužina kablova potenciometra i prekidača: 190 mm - Rupa za montažu prekidača: 15 mm

Senzor protoka vode - merač - protokomer 1-60 L/min za arduino i slicne sisteme. Karakteristike: - Radni napon: DC 5~24 V - Maksimalna struja: 15 mA (DC 5V) - Navoj: 1`` - Model: FS400A G1 - Maksimalni pritisak vode: 1.2 Mpa (12 bar-a) - Maksimalna temperatura vode: 120 stepeni (po deklaraciji) - Vlažnost vazduha: 35~90 %RH (bez leda) - Radna temperatura: -25~80 ℃ - Dimenzije: 61 x 36 x 34 mm Povezivanje: crvena(+), crna(-), žuta (impulsni izlaz) Na izlazu se pojavljuje povorka impulsa zavisno od protoka, više impulsa u minutu. Broj impulsa (frekvencija) = 4.8 x Q Q - protok u litrima u minutu (2L/min=9Hz; 4L/min=19Hz; ...)

Hall magnetni (induktivni) senzor za detekciju magnetnih predmeta. Karakteristike: - Prečnik senzora: 8 mm - Model: NJK-5001A - Napon napajanja: 6-36 V DC - Izlaz: 300 mA - 3 žice - Polaritet: PNP - Dimenzije: M8 x 15 x 50 mm - Dužina kabla za konekciju: 110 cm - Distanca detekcije: 10 mm - Status senzora: NO (normalno otvoren) - Objekat za detekciju: permanentni magnet (ne dolazi uz senzor) - Radna temperatura: -25~75 °C - Otpor izolacije: ≥ 50 MΩ - Materijal kučišta: Metal - Stepen zaštite: IP67 - Potrošnja: < 8mA DC - Radno magnetno polje: 22 mT - Ponovljivost: 0,01 - ON/OFF učestanost: do 320 KHz Povezivanje: - braon - napajanje, + polaritet - plava - napajanje, masa, - polaritet - crna - izlaz - prilikom nailaska magneta na izlazu se pojavljuje + polaritet ulaznoga napona napajanja, pozitivan polaritet

Hall magnetni (induktivni) senzor za detekciju magnetnih predmeta. Karakteristike: - Prečnik senzora: 8 mm - Model: NJK-5001B - Napon napajanja: 6-36 V DC - Izlaz: 300 mA - 3 žice - Polaritet: PNP - Dimenzije: M8 x 15 x 50 mm - Dužina kabla za konekciju: 110 cm - Distanca detekcije: 10 mm - Status senzora: NC (normalno zatvoren) - Objekat za detekciju: permanentni magnet (nekad dolazi, nekad ne dolazi uz senzor) - Radna temperatura: -25~75 ° C - Otpor izolacije: ≥ 50 MΩ - Materijal kučišta: Metal - Stepen zaštite: IP67 - Potrošnja: < 8mA DC - Radno magnetno polje: 22 mT - Ponovljivost: 0,01 - ON/OFF učestanost: do 320 KHz Povezivanje: - braon - napajanje, + polaritet - plava - napajanje, masa, - polaritet - crna - izlaz - prilikom nailaska magneta na izlazu se prekida + polaritet ulaznoga napona napajanja, pozitivan polaritetitet

Pojacalo snage sa kolom TDA7498, 2x100W, napon napajanja do 36V. Ulazno pojacanje moze da se menja pomocu dip prekidaca u zavisnosti od jacine signala na ulazu. Parameters: Amplifier chip: TDA7498 Output power: 100W+100W (Vcc = 36 V, RL = 6Ω, THD: 10%) Output power: 80W+80W (Vcc = 34 V, RL = 8Ω, THD: 10%) Wide range single power supply: 15-34VDC(recommended 24V) Applicable speaker impedance: 8 ohm best(4 ohm or 6 ohm also works) Four fixed gain settings available: 25.6 dB, 31.6 dB, 35.1 dB and 37.6 dB Adopts differential input to minimize common-mode noise Protection: short-circuit protection, over temperature protection With standby and mute features High efficiency: 90% 3 Modes: (you can set the mode by shorting the pins shown on pictures). Standby mode: all circuits closed, at a low power state; Mute mode: all input signals connects ground, the duty cycle of forward/backward PWM output signal is 50%; Normal working mode: the amplifier works normally.

P04 The multi-function relay control module is specially designed for users with many different needs. It adopts a microcontroller as the main control unit and presets 32 kinds of functions, and users can use corresponding specific functions according to actual needs. It can be applied to water pump control, motor control, lamp strip control, solenoid valve control, etc. 1. New upgrade, the module function is increased to 32 kinds, to meet more application needs. 2. The power supply anti-reverse function will not damage the module due to wrong power supply. 3. Timing accuracy to 0.01 seconds timing. 0.1 seconds (minimum) ~ 999 minutes (maximum) optional 4. Low power consumption power saving setting, you can turn off the display area. Product parameters: Product Name: Multi-function time delay relay Relay V number: DC5V/12V/24V optional Input voltage: 5V version: DC5V power supply; 12V version: DC12V power supply; 24V version: DC24V power supply Output load: within 30V DC, maximum 10A. Within 250V, maximum 5A. Trigger signal: 5V version (high level: 5V); 12V version (high level: 12V), 24V version (high level: 24V) The low level is 0V. Quiescent current: 20mA Working current: 60mA Working temperature: -25℃-85℃ Power-off memory: Yes Product weight: ≈26g, product size: 65* 34.3 * 17.5 (MM L*W*H) The manual measurement is for reference only, the actual size is subject to the actual product Product Features: Wiring port description: DC+ Input DC power supply positive DC- Input DC power supply negative IN+ signal input positive IN- signal input negative NO relay normally open interface, the relay is short-circuited with COM when it is engaged, and it is suspended when not engaged; COM relay common terminal interface NC relay normally closed terminal interface, when the relay is not pulled in, it is short-circuited with COM, and it is left floating when pulled in; Instructions for use: Working mode (32 kinds): P-11: In jog mode, there is signal pull-in and no signal disconnect. P-12: Self-locking mode, the state of the relay reverses once after each trigger. P-13: After triggering, the relay will pull in and disconnect after delaying A time; the trigger will be invalid during the delay. P-14: After triggering, the relay will pull in, and it will be disconnected after the delay of A time; the trigger will be re-timed during the delay. P-15: After triggering, the relay will pull in, and it will be disconnected after the delay time A; during the delay time, the accumulated timer will be triggered. P-16: After triggering, the relay will pull in and disconnect after delaying time A; during the delay, a reset will be triggered (relay disconnected). P-17: After triggering, the relay pulls in for the duration of the signal, the input signal disappears, and then disconnects after the delay of A time; during the delay time, the relay is triggered again to keep the pull in, and the timing stops until the last signal disappears, delay A time Then disconnect. P-18: The relay will pull in immediately after power-on, and it will be disconnected after a delay of A second; until the next power-on. P-21: Give the signal, the relay will pull in after the delay of A time. P-22: Give a continuous signal, after the time exceeds A, the relay will pull in; when the signal disappears, the relay will open. P-23: When the signal disappears for more than A time, the relay pulls in; when there is a signal, the relay disconnects. P-24: Give a continuous signal. After the time exceeds A, the relay will pull in; when the signal disappears for more than time A, the relay will open. P-25: Give a continuous signal, the relay pulls in after exceeding A time; give a continuous signal again, the relay turns off after exceeding A time P-26: Give a signal, the relay will disconnect after A time pull-in; after the signal disappears, the relay will stop after A second pull-in. P-27: There is a pulse signal (rising edge or falling edge), the relay is disconnected, there is no pulse signal, the relay pulls in after the delay of A time (continuous high level or continuous low level are considered as no pulse). P-28: After power on, the relay will pull in after the delay time A until power off. The P-31: After power-on, the relay pulls in time A and turns off time B, in an infinite loop; power off stops. P-32: There is a continuous signal, the relay pulls in A time, disconnects B time, infinite loop; the signal disappears, and the loop is terminated. P-33: Give a signal once, the relay pulls in A time, disconnects B time, infinite loop; give another signal to terminate the loop. P-34: After power-on, the relay pulls in after the delay time A, and disconnects after pulling in the time B. P-35: Give a signal, after the delay time A, the relay pulls in and pulls off after the time B pulls in. P-36: Continuous signal is given. After the time A is exceeded, the relay is switched on and disconnected after the time B is switched on; the signal disappears, the timing is cleared, and the relay is turned off. P-37: There is a signal, the relay will be automatically disconnected after the A time is closed, and the B time will be counted after the disconnection. The signal trigger is invalid during the A+B time. P-38: There is a signal, the relay will be automatically disconnected after the time of pull-in A, after the time B is counted after the disconnection, it will be automatically disconnected after the time of pull-in A again. The P-41: The signal does not act; the signal disappears and triggers; the relay absorbs and merges after a delay of A time to disconnect. P-42: The signal disappears. After the delay time A, the relay pulls in; after the delay time B, the relay disconnects. P-43: The signal disappears. After the disappearance exceeds the time A, the relay pulls in; after delaying the time B, the relay opens. P-44: After power-on, the relay pulls in time A and turns off time B; after the cycle C times, the relay turns off and stops. P-45: No action after power on; after the signal is given, the relay pulls in the A time and disconnects the B time; the relay is turned off and stopped after C cycles; when the signal is given, it is executed again. P-46: After the signal is given more than A times, the relay pulls in; keeps pulling in; the power stops. P-47: After the signal exceeds A times, the relay pulls in; when it pulls in for B time, it is disconnected. P-48: During the C time, after continuously giving the signal more than A times, the relay will disconnect and stop after B time. Description table of the position of the decimal point and the time unit it represents: x.xx Decimal point is in the hundreds place, time range 0.01~9.99 seconds xx.x decimal point is in the tenth place, time range 0.1~99.9 seconds xxx has no decimal point, time range is 1~999 seconds xxx. The decimal point is in single digits, the time range is 1~999 minutes Turn off the display: In the non-setting state, press the K4 key to turn off the display, then press it again to turn on. Description of working parameter setting: Hold down the K1 key without letting go, after 2 seconds the display shows P-xx, press K2 and K3 to change the working mode. After selecting the working mode, short press K1 to enter the A time setting, the screen displays Axxx, then press K2 and K3 to modify the A time parameters, K2 and K3 key short press plus or minus 1, long press to quickly add and subtract 10, Press the K4 key to set the position of the decimal point. After setting the A time, press the K1 key to set the B time, the screen displays bxxx, then press the K2 and K3 keys to modify the B time parameters, K2 and K3 keys short press plus or minus 1, long press to quickly add and subtract 10, Press the K4 key to set the position of the decimal point. After setting the B time, (if the mode has the C cycle number parameter), then press the K1 key to set the C cycle number, the screen displays Cxxx, then press the K2 and K3 keys to modify the C cycle number parameter, K2 and K3 keys Short press to increase and decrease by 1, long press to increase and decrease by 10. After setting, press the K1 key once to exit the setting state and save all parameters.

P04 The multi-function relay control module is specially designed for users with many different needs. It adopts a microcontroller as the main control unit and presets 32 kinds of functions, and users can use corresponding specific functions according to actual needs. It can be applied to water pump control, motor control, lamp strip control, solenoid valve control, etc. 1. New upgrade, the module function is increased to 32 kinds, to meet more application needs. 2. The power supply anti-reverse function will not damage the module due to wrong power supply. 3. Timing accuracy to 0.01 seconds timing. 0.1 seconds (minimum) ~ 999 minutes (maximum) optional 4. Low power consumption power saving setting, you can turn off the display area. Product parameters: Product Name: Multi-function time delay relay Relay V number: DC5V/12V/24V optional Input voltage: 5V version: DC5V power supply; 12V version: DC12V power supply; 24V version: DC24V power supply Output load: within 30V DC, maximum 10A. Within 250V, maximum 5A. Trigger signal: 5V version (high level: 5V); 12V version (high level: 12V), 24V version (high level: 24V) The low level is 0V. Quiescent current: 20mA Working current: 60mA Working temperature: -25℃-85℃ Power-off memory: Yes Product weight: ≈26g, product size: 65* 34.3 * 17.5 (MM L*W*H) The manual measurement is for reference only, the actual size is subject to the actual product Product Features: Wiring port description: DC+ Input DC power supply positive DC- Input DC power supply negative IN+ signal input positive IN- signal input negative NO relay normally open interface, the relay is short-circuited with COM when it is engaged, and it is suspended when not engaged; COM relay common terminal interface NC relay normally closed terminal interface, when the relay is not pulled in, it is short-circuited with COM, and it is left floating when pulled in; Instructions for use: Working mode (32 kinds): P-11: In jog mode, there is signal pull-in and no signal disconnect. P-12: Self-locking mode, the state of the relay reverses once after each trigger. P-13: After triggering, the relay will pull in and disconnect after delaying A time; the trigger will be invalid during the delay. P-14: After triggering, the relay will pull in, and it will be disconnected after the delay of A time; the trigger will be re-timed during the delay. P-15: After triggering, the relay will pull in, and it will be disconnected after the delay time A; during the delay time, the accumulated timer will be triggered. P-16: After triggering, the relay will pull in and disconnect after delaying time A; during the delay, a reset will be triggered (relay disconnected). P-17: After triggering, the relay pulls in for the duration of the signal, the input signal disappears, and then disconnects after the delay of A time; during the delay time, the relay is triggered again to keep the pull in, and the timing stops until the last signal disappears, delay A time Then disconnect. P-18: The relay will pull in immediately after power-on, and it will be disconnected after a delay of A second; until the next power-on. P-21: Give the signal, the relay will pull in after the delay of A time. P-22: Give a continuous signal, after the time exceeds A, the relay will pull in; when the signal disappears, the relay will open. P-23: When the signal disappears for more than A time, the relay pulls in; when there is a signal, the relay disconnects. P-24: Give a continuous signal. After the time exceeds A, the relay will pull in; when the signal disappears for more than time A, the relay will open. P-25: Give a continuous signal, the relay pulls in after exceeding A time; give a continuous signal again, the relay turns off after exceeding A time P-26: Give a signal, the relay will disconnect after A time pull-in; after the signal disappears, the relay will stop after A second pull-in. P-27: There is a pulse signal (rising edge or falling edge), the relay is disconnected, there is no pulse signal, the relay pulls in after the delay of A time (continuous high level or continuous low level are considered as no pulse). P-28: After power on, the relay will pull in after the delay time A until power off. The P-31: After power-on, the relay pulls in time A and turns off time B, in an infinite loop; power off stops. P-32: There is a continuous signal, the relay pulls in A time, disconnects B time, infinite loop; the signal disappears, and the loop is terminated. P-33: Give a signal once, the relay pulls in A time, disconnects B time, infinite loop; give another signal to terminate the loop. P-34: After power-on, the relay pulls in after the delay time A, and disconnects after pulling in the time B. P-35: Give a signal, after the delay time A, the relay pulls in and pulls off after the time B pulls in. P-36: Continuous signal is given. After the time A is exceeded, the relay is switched on and disconnected after the time B is switched on; the signal disappears, the timing is cleared, and the relay is turned off. P-37: There is a signal, the relay will be automatically disconnected after the A time is closed, and the B time will be counted after the disconnection. The signal trigger is invalid during the A+B time. P-38: There is a signal, the relay will be automatically disconnected after the time of pull-in A, after the time B is counted after the disconnection, it will be automatically disconnected after the time of pull-in A again. The P-41: The signal does not act; the signal disappears and triggers; the relay absorbs and merges after a delay of A time to disconnect. P-42: The signal disappears. After the delay time A, the relay pulls in; after the delay time B, the relay disconnects. P-43: The signal disappears. After the disappearance exceeds the time A, the relay pulls in; after delaying the time B, the relay opens. P-44: After power-on, the relay pulls in time A and turns off time B; after the cycle C times, the relay turns off and stops. P-45: No action after power on; after the signal is given, the relay pulls in the A time and disconnects the B time; the relay is turned off and stopped after C cycles; when the signal is given, it is executed again. P-46: After the signal is given more than A times, the relay pulls in; keeps pulling in; the power stops. P-47: After the signal exceeds A times, the relay pulls in; when it pulls in for B time, it is disconnected. P-48: During the C time, after continuously giving the signal more than A times, the relay will disconnect and stop after B time. Description table of the position of the decimal point and the time unit it represents: x.xx Decimal point is in the hundreds place, time range 0.01~9.99 seconds xx.x decimal point is in the tenth place, time range 0.1~99.9 seconds xxx has no decimal point, time range is 1~999 seconds xxx. The decimal point is in single digits, the time range is 1~999 minutes Turn off the display: In the non-setting state, press the K4 key to turn off the display, then press it again to turn on. Description of working parameter setting: Hold down the K1 key without letting go, after 2 seconds the display shows P-xx, press K2 and K3 to change the working mode. After selecting the working mode, short press K1 to enter the A time setting, the screen displays Axxx, then press K2 and K3 to modify the A time parameters, K2 and K3 key short press plus or minus 1, long press to quickly add and subtract 10, Press the K4 key to set the position of the decimal point. After setting the A time, press the K1 key to set the B time, the screen displays bxxx, then press the K2 and K3 keys to modify the B time parameters, K2 and K3 keys short press plus or minus 1, long press to quickly add and subtract 10, Press the K4 key to set the position of the decimal point. After setting the B time, (if the mode has the C cycle number parameter), then press the K1 key to set the C cycle number, the screen displays Cxxx, then press the K2 and K3 keys to modify the C cycle number parameter, K2 and K3 keys Short press to increase and decrease by 1, long press to increase and decrease by 10. After setting, press the K1 key once to exit the setting state and save all parameters.

K15 Multi-mode delay time relay module 32 modes of pulse delay time delay time delay high precision programmable optocoupler isolation 5 v12v24v optional The multi-function relay control module is specially designed for users with various requirements. It adopts the microcontroller as the main control unit with 32 functions preset. Users can use the corresponding specific functions according to the actual requirements. Can be used in water pump control, motor control, lamp belt control, solenoid valve control and so on. 1. New upgrade, increasing the number of module functions to 32, to meet more application requirements. 2. Anti-backconnection function of power supply, which will not damage the module due to wrong power supply. 3. Timing accuracy to 0.01 second. 0.1 seconds (minimum) ~999 minutes (maximum) optional 4.. Low power saving Settings, you can turn off the display area. Product parameters: Commodity name: Multi-function delay relay Relay V number: DC5V/12V/24V optional Input voltage: 5V Version: DC5V power supply; 12V version: DC12V power supply; 24V version: DC24V power supply Output load: dc 30V, Max 10A. Ac 250V, maximum 5A. Trigger signal: 5V version (high level: 5V); Both 12V (HIGH level: 12V) and 24V (high level: 5V) low levels are 0V. Static current: 20mA Operating current: 60mA Operating temperature: -25℃-85℃ Power off memory: Yes Product weight: ≈26g, product size: 65 x 34.3 X 17.5 (MM) Manual measurement is for reference only. The actual size is subject to the material object Warm tips: 1. Please select the required V version (according to the relay identification difference above, the relay is 5V instant 5V version) to avoid wrong purchase. 2. The output of relay is passive contact without current output to control the on-off effect of a line. 3. Please input the trigger voltage strictly according to the selected version Instructions for use: Working mode (32 kinds) : P-11: Inching mode with suction and no disconnection. P-12: Self-locking mode, and the relay state is reversed once after each trigger. P-13: When triggered, the relay pulls in and disconnects after A time delay; Invalid trigger during delay. P-14: When triggered, the relay pulls in and disconnects after A time delay; Retiming is triggered during a delay. P-15: When triggered, the relay pulls in and disconnects after A time delay; Accumulative timing is triggered during delay. P-16: When triggered, the relay pulls in and disconnects after A time delay; Trigger reset (relay disconnection) during delay. P-17: When triggered, the relay pulls in during the signal duration, the input signal disappears, and the relay is disconnected after A time delay; During the delay, the relay is triggered again to keep the suction, and the timing stops until the last signal disappears, and the relay is disconnected after the delay of time A. P-18: After the power is switched on, the relay will pull in immediately and disconnect after A second delay; Until the next power cut. P-21: Signal feed, relay suction after delay A time. P-22: Give the continuous signal. After A time, the relay pulls in; The signal disappears and the relay disconnects. P-23: When the signal disappears beyond time A, the relay pulls in; There is a signal, the relay is off. P-24: Give the continuous signal. After A time, the relay pulls in; When the signal disappears beyond time A, the relay is disconnected. P-25: Give the continuous signal. After A time, the relay pulls in; Give the continuous signal again, after A time, the relay is disconnected P-26: Signal is given and the relay is disconnected after absorbing A time; After the signal disappears, the relay pulls in again for A second and then stops P-27: the relay with pulse signal (rising edge or falling edge) is disconnected, and there is no pulse signal. The relay will be absorbed after A time delay (both continuous high level and continuous low level are considered to have no pulse). P-28: After power on, the relay will pull in after delay time A until power off. P-31: After power on, the relay pulls in time A and disconnects time B, infinite cycle; The power is off. P-32: With continuous signal, the relay pulls in A time, disconnects B time, infinite cycle; The signal disappears and the loop is terminated. P-33: Give A signal, the relay pulls in A time, disconnects B time, infinite cycle; Give the signal one more time to stop the loop. P-34: After power on, the relay will pull in after delay time A, and disconnect after pull in time B. P-35: Signal is given once. After delay of time A, the relay pulls in and shuts off after time B. P-36: Give the continuous signal. After A time, the relay will pull in and disconnect after B time. Signal disappeared, time reset, relay disconnected. P-37: There is A signal. The relay will automatically disconnect after it pulls in time A, and then timing time B after it is disconnected. The signal trigger will be invalid within time A+B. P-38: There is A signal. The relay will automatically disconnect after absorbing A time, and then timing B time after disconnecting, and automatically disconnect after absorbing A time again. P-41: No action on signal; Signal vanishing trigger; The relay is disconnected after absorbing the delay time of A. P-42: the signal disappears and the relay pulls in after A time delay; The relay disconnects after B time delay. P-43: The signal disappears, and the relay pulls in after the disappearance exceeds time A; The relay disconnects after B time delay. P-44: After power on, the relay attracts time A and disconnects time B; The relay disconnects and stops after C cycles. P-45: No action after power on; After giving the signal, the relay attracts A time and disconnects B time; The relay disconnects and stops after C cycles. Give the signal, then execute again. P-46: When the signal is given more than A times, the relay pulls in; Keep the suction; The power is off. P-47: When the signal is given more than A times, the relay pulls in; Disconnect after suction B time. P-48: In C time, after continuous signal feeding for more than A times, the relay will disconnect and stop after absorbing B time. Table showing the position of the decimal point and the unit of time it represents: The decimal point is in the hundreds place, and the time range is 0.01~9.99 seconds Xx. X decimal point in ten place, time range 0.1~99.9 seconds XXX has no decimal point and the time range is 1-999 seconds XXX. The decimal point is in one place and the time range is 1-999 minutes Turn off display: In non-set state, press K4 to turn off the display screen, then press again to open it again. Description of working parameters setting: Hold down the K1 key and hold it until p-XX appears on the screen 2 seconds later. Press K2 and K3 to change the working mode. After selecting the working mode, press K1 to enter the time setting of A, and Axxx is displayed on the screen. At this time, press K2 and K3 to modify the time parameters of A, press K2 and K3 to add and subtract 1 for short, long to add and subtract 10 for fast, and press K4 to set the position of the decimal point. After setting time A, press K1 to set time B. BXXX is displayed on the screen. At this time, press K2 and K3 to modify time parameters of B; press K2 and K3 to add or subtract 1 for short; press K4 to add or subtract 10 for long; and press K4 to set the position of the decimal point. After setting the B time (in the case that the mode has C cycle number parameter), press K1 to set the C cycle number, and the screen shows Cxxx. At this time, press K2 and K3 to modify the C cycle number parameter, press K2 and K3 to add or subtract 1 for short, and press long to add or subtract 10 for fast. After setting, press the K1 key one last time to exit the setting state and save all parameters. Description of wiring port: DC+ input DC power positive pole DC- input DC power negative pole IN+ signal input positive pole IN- negative input terminal NO relay always start interface, relay suction and COM short connected, not closed suspension; COM relay common end interface Normally closed end interface of NC relay. When the relay fails to suck, it is short connected with COM. When the pull, it is suspended.