Pratite promene cene putem maila
- Da bi dobijali obaveštenja o promeni cene potrebno je da kliknete Prati oglas dugme koje se nalazi na dnu svakog oglasa i unesete Vašu mail adresu.
1-27 od 116 rezultata
Prati pretragu "EKSTRUDER,"
Vi se opustite, Gogi će Vas obavestiti kad pronađe nove oglase za tražene ključne reči.
Gogi će vas obavestiti kada pronađe nove oglase.
Režim promene aktivan!
Upravo ste u režimu promene sačuvane pretrage za frazu .
Možete da promenite frazu ili filtere i sačuvate trenutno stanje
Aktivni filteri
-
Cena
4,500 din - 899,999 din
-
Tehnika chevron_right Računari i prateća oprema
Anycubic Viper je FDM štampač za početnike i napredne korisnike. Viper 3D Printer ima automatsko nivelisanje tako da ne morate razmišljati o tome da podesite tačnu udaljenost do ploče. Pritiskom na dugme aktivira se funkcija i 3D štampač pokreće program automatskog nivoa. Sama ploča ima PEI opružni čelik što znači da možete lakše dobiti gotovi otisak ploče. Pored toga, Anycubic Viper ima snažan ekstruder koji je Anycubic sam razvio kao i fioku za skladištenje potrebnih alata. Specifikacija LCD Ekran 4.3″ LCD Brzina štampe ≤180mm/s Veličina štampe 245 x 245 x 260 mm Temperatura mlaznice do 260 °C Temperatura podloge do 110 °C Veličina 508 × 457 × 516 mm Težina 10 kg
-
Tehnika chevron_right Računari i prateća oprema
Anicubic Kobra ima niz praktičnih karakteristika koje će ceniti i početnici u štampanju i iskusni korisnici. Karakteristike: Zapremina: 220 k 220 k 250 mm (D k Š k V) Veličina uređaja: 486 k 430 k 486 mm (D k Š k V) LeviK - Automatsko nivelisanje štamparske ploče (nivelisanje od 25 tačaka) Integrisani ekstruder sa direktnim pogonom za kratke puteve filamenta Maksimalna temperatura štampanja: 260°C / 500°F Maksimalna temperatura grejnog sloja: 110 °C / 230 °F Fleksibilna čelična PEI ploča za pritisak Brzo štampanje do 180 mm/s Visoka kompatibilnost filamenta Izuzetno lagan - teži samo 7 kg Modularni dizajn - Lako sklapanje za samo 10 minuta Ekran osetljiv na dodir od 4,3 inča jednostavan za korišćenje Bezbrižno nivelisanje
EKSTRUDER ZA PRERADU (EKSTRUDIRANJE) ZRNA SOJE,za proizvodnju punomasnog sojinog griza,sa elektronskom regulacijom doziranja zrna soje i termostatskom regulacijom radne temperature pečenja (EKSTRUDIRANJA). HT-ST temperature Short Time što u prevodu znači:VISOKA TEMPERATURA-KRATKO VREME OBRADE.Ta činjenica o kratkotrajnom terminu (20-30sec.)na visokoj temperaturi bez prisustva kiseonika,obezbedjuje visok rejting ovom postupku.Kratkoća vremena termičke obrade ne dozvoljava promene na proizvoda
-
Poljoprivreda chevron_right Poljoprivredne mašine i rezervni delovi
Prodajem Ekstrudere za soju svih kapaciteta sa elektronskim doziranjem zrna.Rezervni delovi,garancija dve godine. Tel:0611944942
-
Poljoprivreda chevron_right Poljoprivredne mašine i rezervni delovi
Prodajem Ekstrudere za soju svih kapaciteta sa elektronskim doziranjem zrna.Moguća prerada i ostalih žitarica,hrane za ribe i hrane za kućne ljubimce.Rezervni delovi,garancija godinu dana. Tel:061-194-49-42 022/668-417
Povoljno se prodaje ekstruder za proizvodnju folije kapaciteta 20-25kg/sat radne površine 500mm sa rotacionom motalicom i bombarderom za pripremu folije za štampu domaće proizvodnje; automatska mašina za konfekcioniranje kesa svih materijala radne povšine 500mm sa fotoćelijom (za proizvodnju kesa sa markicom) kapciteta 1500kom/sat-domaća proizvodnja kompresor i ostali pripadajući delovi (za pravljenje falti na foliji, dodatci na valjku za sečenja folije )
Kompletna linija za proizvodnju bastanskih creva i dihtunga-kedera za alu pvc ili drvenu stolariju. Sa kompletnim alatima (najvise alata za bastanska creva) i glavama(1 glava za creva, druga za dihtunge). Termo regulatori digitalni. Masina u funkciji sve ispravno bez skrivenih mana, mogucnost placanja preko firme. Mogucnost prevoza linije u Srbiji do vaseg odredista i naravno taj trosak je vas koji morate platiti ukoliko nemate svoj prevoz. za vise info pozovite broj od alatnicara dajem samo ozbiljnim kupcima. Masina je laka za odrzavanje.mogucnost zamene za gradjevinski materijal,automobil ili motor
Extrusora sistema de dosificación de sellantes y adhesivos de un componente para el sector del vidrio Equipos de extrusión de sellantes y adhesivos mocomoponentes para el sector del vidrio Los Sistemas de extrusión Graco permiten extruir de manera fiable selladores y adhesivos de un componente de viscosidad media a alta en bidones pequeños de 20 l o grandes de 200 l Poruka Poruka
Grinder for plastics GRINDEX - 11 The GRINDEX series of plastic shredders are versatile, high-performance medium-sized shredders. Ideal for medium to large scale production, GRINDEX shreds a wide range of plastics, rubber and other solid waste (wood, paper, fiberglass, etc.) as well as difficult to grind waste (medium-sized castings, pipes, thick-walled sheet materials, cans, drums, bottles and films). Intended for. The size of the initial fraction is determined by the size of the sieve mesh. Depending on the customer's requirements, a sieve mesh with the required cell size can be installed. Thanks to the efficient processing process, it is possible to obtain a well-flowing, dense bulk product with minimal energy consumption and high productivity. Specification Product dimensions Length 1515,0 (mm) Width 1150,0 (mm) Height 1585,0 (mm) Features Product Weight 850 (kg) Usage For plastics of high and medium hardness Efficiency 250 (kg / h) Energy consumption 11 (kW) Tension 380 (V) Drive type Belt (3 pcs) The diameter of the nozzle for the intake of raw materials 400*220 (мм) Outgoing faction up to 10 (mm) Additional information Guarantee 12 month Number of knives 17 (pcs) Video review Poruka Poruka
Feed extruder (soy) EGK-150 , 15 kW | 150 kg/h Household grain extruder with a capacity of 15 kW, intended for the preparation of fodder for pets, poultry and fish with a productivity of up to 150 kg per hour. A homogeneous stick is obtained at the output. For the convenience of further use, you can use a special shredder. Operates from 380 V mains. Great for small home and farm use. Advantages of extruded feed: 1. The fodder extruder in the pressing chamber grinds the fodder, and under the influence of a pressure of 40-60 atmospheres, it is heated to a temperature of 180C. When leaving the die, due to the difference in pressure, water hammer occurs in the grains, as a result of which the grains foam, increasing in volume more than 5 times. As a result, 5 times more fodder for the farm is obtained; 2. Due to ultra-fast heat treatment, starch, which is poorly absorbed by animals, is broken down into simple carbohydrates and sugar, while most of the vitamins and proteins do not have time to break down, and the high temperature makes it possible to get rid of pathogenic microflora and fungus, which are present even in dried grain; 3. The feed is disinfected in the extruder, which is especially useful when growing young animals that are sensitive to various types of bacteria and other harmful microorganisms; 4. The possibility of using spoiled grain, underripe and almost any quality; 5. The feed after the extruder has the shape of a stick, is pleasant to the taste and is eaten by animals with pleasure, leaving no waste. Specification Product dimensions Length 1100,0 (mm) Width 1100,0 (mm) Height 1000,0 (mm) Features Product Weight 220 (kg) Producer LabEcoTech Usage Grain,soy Efficiency up to 150 (kg/h) Energy consumption 15 (kW) Tension 380 (V) Tank volume 20 (L) Additional information Guarantee 12 month Video review Poruka Poruka
Feed extruder (soy) EGK-200 , 18.5 kW | 200 kg/h Household grain extruder with a capacity of 18.5 kW, intended for the preparation of fodder for pets, poultry and fish with a productivity of up to 200 kg per hour. A homogeneous stick is obtained at the output. For the convenience of further use, you can use a special shredder. Operates from 380 V mains. Great for small home and farm use. Advantages of extruded feed: 1. The fodder extruder in the pressing chamber grinds the fodder, and under the influence of a pressure of 40-60 atmospheres, it is heated to a temperature of 180C. When leaving the die, due to the difference in pressure, water hammer occurs in the grains, as a result of which the grains foam, increasing in volume more than 5 times. As a result, 5 times more fodder for the farm is obtained; 2. Due to ultra-fast heat treatment, starch, which is poorly absorbed by animals, is broken down into simple carbohydrates and sugar, while most of the vitamins and proteins do not have time to break down, and the high temperature makes it possible to get rid of pathogenic microflora and fungus, which are present even in dried grain; 3. The feed is disinfected in the extruder, which is especially useful when growing young animals that are sensitive to various types of bacteria and other harmful microorganisms; 4. The possibility of using spoiled grain, underripe and almost any quality; 5. The feed after the extruder has the shape of a stick, is pleasant to the taste and is eaten by animals with pleasure, leaving no waste. Specification Product dimensions Length 1100,0 (mm) Width 1100,0 (mm) Height 1000,0 (mm) Features Product Weight 250 (kg) Producer LabEcoTech Usage Grain,soy Efficiency up to 200 (kg/h) Energy consumption 18,5 (kW) Tension 380 (V) Tank volume 50 (L) Additional information Guarantee 12 month Video review Poruka Poruka
Grinder for plastics GRINDEX - 15 The GRINDEX series of plastic shredders are versatile, high-performance medium-sized shredders. Ideal for medium to large scale production, GRINDEX shreds a wide range of plastics, rubber and other solid waste (wood, paper, fiberglass, etc.) as well as difficult to grind waste (medium-sized castings, pipes, thick-walled sheet materials, cans, drums, bottles and films). Intended for. The size of the initial fraction is determined by the size of the sieve mesh. Depending on the customer's requirements, a sieve mesh with the required cell size can be installed. Thanks to the efficient processing process, it is possible to obtain a well-flowing, dense bulk product with minimal energy consumption and high productivity. Specification Product dimensions Length 1296,0 (mm) Width 1100,0 (mm) Height 1522,0 (mm) Features Product Weight 820 (kg) Usage For plastics of high and medium hardness Efficiency 350 (kg / h) Energy consumption 15 (kW) Tension 380 (V) Drive type Belt (3 pcs) The diameter of the nozzle for the intake of raw materials 400*220 (mm) Outgoing faction up to 10 (mm) Additional information Guarantee 12 month Number of knives 22 (pcs) Video review Poruka Poruka
Feed extruder EGK-30, 4 kW (220/380V) 30 kg/h Feed screw extruder EGK-30 is designed for sintering feed from grain crops. The model has a productivity of up to 30 kg/h. 2 types of 220/380V connection are possible. You can also purchase equipment without an engine or only the working part (working module). At the request of the customer, the extruder can be additionally equipped with a BP-50 resin hopper. The EGK-30 grain extruder efficiently processes grain: corn, oats, wheat, rye, legumes, soy, and up to 20% bran can also be added. It is important that the grain or mixture does not need to be steamed before processing. The main advantage of this extruder is that it can be used in the conditions of a small household, where there is no industrial voltage of 380 V. Specification Product dimensions Length 750,0 (mm) Width 800,0 (mm) Height 500,0 (mm) Features Product Weight 55 (kg) Producer LabEcoTech Efficiency up to 30 (kg/h) Energy consumption 4 (kW) Tension 220/380 (V) Tank volume 6 (L) Additional information Guarantee 12 month Video review Poruka Poruka
Feed extruder EGK-50 , 5.5 kW | 50 kg/h Feed screw extruder EGK-50 is designed for sintering feed from grain crops. The model has a capacity of up to 50 kg/h. It is also possible to purchase equipment without an engine or only a working part (working module). At the request of the customer, the extruder can be additionally equipped with a BP-50 bunker. Grain extruder EGK-50 effectively processes grain: corn, oats, wheat, rye, legumes, soybeans, it can also be added to 20% bran. It is important that grains or mixtures do not need to be steamed before processing. The main advantage of the extruder is that it can be used in a small household. Specification Product dimensions Length 650,0 (mm) Width 450,0 (mm) Height 400,0 (mm) Features Product Weight 65 (kg) Producer LabEcoTech Efficiency up to 50 (kg/h) Energy consumption 5,5 (kW) Tension 380 (V) Tank volume 6 (L) Additional information Guarantee 12 month Video review Poruka Poruka