Technical Data: 42 MHz Bandwidth with 1680 tunable UHF frequencies 20 Frequency banks with 12 preset frequencies each Frequency response: 25 - 18.000 Hz Wireless synchronization of transmitters via infrared interface Handheld transmitter with charger contacts for optional BA 2015 battery (NiMH) Pilot tone Automatic frequency scan feature searches for available frequencies Audio gain over 60 dB range Battery indication in 4 steps shown on transmitter and receiver display HDX Compander Frequency range: B-Band 626 - 668 MHz LCD display with VF level and channel display 30 mW Transmitter power Included: 1x CL100 XLR cable, 1x CL1 jack cable, 1x CA2 camera adapter and 4x AA batteries

Čvrst i pouzdan, "jednostavan-za-korišćenje" S bežični mikrofonski sistem koji Vam pruža legendarni Sennheiser zvuk namenjen za sve veličine prostora, konferencijske dvorane, itd. Ručni mikrofonski sistem koji sadrži superkardioidnu pre-plarizovanu kondenzatorsku kapsulu koja Vam omogućava da čujete svaki detalj Vašeg glasa. Ručni odašiljač sadrži osvetljeni mute prekidač, mogućnost rada do 10h te 960 podesivih frekvencija. Potpuno metalni True Diversity prijemnik omogućava Vam intuitivno skeniranje i sync funkcije koje Vam omogućavaju bezbrižan rad.

Featuring Sennheiser's evolution Lavalier ME 2-II Selectable UHF frequencies within a large bandwidth Up to 10 compatible channels Diversity reception Sennheiser XSW 1-ME2 Specs System Modulation Wideband FM Frequency Range A: 548 to 572 MHz Switching Bandwidth Up to 24 MHz Signal to Noise Ratio ≥ 103 dBA Total Harmonic Distortion ≤ 0.9% Temperature Range Operation: 32 to 104°F (0 to +40°C) Storage -4 to 158°F (-20 to 70°C) Transmitter Synchronization 2.4 GHz, Low Power OQPSK (only active during synchronization) Receiver Principle Double superheterodyne Diversity Antenna switching diversity via internal antennas Sensitivity < 3 μV at 52 dBA RMS S/N (at peak deviation) Frequency Response 50 Hz to 16 kHz (-3 dB) Max Output Voltage At Peak Deviation, 1 kHz AF 1/4" (6.3 mm) Jack Socket (unbalanced): +6 dBu XLR Socket (balanced): +12 dBu Adjustment Range Audio: 45 dB, adjustable in 5-dB steps Power Supply 12 VDC nominal, 300 mA Squelch Adjustable from 3 dBμV to 28 dBμV (combined with pilot tone) Line/Mic Level 20 dB, switchable Material of Construction ABS housing Dimensions 7.9 x 1.7 x 5.0" (200 x 42 x 127 mm) Weight 12 oz (340 g) Bodypack Transmitter Output Power 10 mW Frequency Response Line: 50 Hz to 16 kHz Mic: 50 Hz to 16 kHz Audio Input 1/8" (3.5 mm) jack socket Input Voltage Mic/Line at 3% THD: Typ. 1.V RMS mic / typ. 2.6 V RMS line at -30 dB gain Power Supply 2 x AA batteries, 1.5 V Operating Time Approximately 10 hours Adjustment Range Transmitter Sensitivity: 0 to -30 dB, adjustable in 10 dB steps Material of Construction Rugged ABS housing Dimensions 2.8 x 3.8 x 1.1" (71 x 96 x 28 mm) Weight 3.4 oz (95 g) Lavalier Microphone Specs Microphone Type Condenser, pre-polarized Sensitivity 20 mV/Pa Polar Pattern Omnidirectional Max SPL 130 dB

Blast From The Past The WA-14 is a classic condenser microphone based on the early 1970's microphone used on countless hit records. The WA-14 utilizes a custom all-brass CK12-style capsule, CineMag USA transformer, and a fully discrete signal path. The WA-14 can be used on an array of sources, such as; punchy/warm intimate lead vocals, acoustic/electric guitars, bass, drums/percussion, strings/orchestral material, and many other sources. The WA-14 provides a realism and thickness that is true to the vintage microphone, but now at an affordable price. All Brass Capsule The WA-12-B-60V is an all-brass, edge-terminated capsule that captures all the smoothness, rich top end, and warm vintage sonics of the original CK12 capsule. The WA-12-B-60V uses a variant CEK-12 back plate as a basis, which overcomes manufacturing limitations of the original CK12 capsule. The o-ring and housing of the WA-12-B-60V are all made from brass (no teflon parts), and the diaphragm is 24k gold sputtered 6 micron, NOS PET film (mylar). The end result is a very consistent, reliable capsule which matches the frequency response and tonality of the classic 1970's classic capsule. Born Out Of Need When designing our first microphone we knew that the single greatest challenge would be to offer a capsule that was built to a high standard and priced in a range that every-day musicians and engineers could afford. We already knew where to find great microphone transformers, precision resistors, polystyrene, tantalum and WIMA film capacitors; but we came to realize that a quality affordable microphone capsule that met our specifications simply wasn’t out there. We knew we would have to develop our own line of capsules. The WA (Warm Audio) brand of capsule is the result of several years of research, a lifetime of listening, and a passion for great sound. Above all else, Warm Audio capsules came from the desire to give customers far more quality/value than what they are used to getting in an affordable microphone. Every Warm Audio capsule is made in the same small assembly house in a clean-room environment, and packaged in its own protective jewel case until the moment it is loaded into the microphone. Every capsule visually inspected and electrically tested for imperfections. Every capsule is also made with all brass parts (no teflon or other cost saving material), and is carefully skinned from the same supply of high purity NOS Mylar (PET film). We are confident that you will be just as pleased with our microphone capsules as we are to offer them, and that they will give you a lifetime of great recordings and enjoyment. Technical Specification Large Diaphragm Condenser Microphone With Variable Pad And Three Polar Patterns Custom CineMag USA Transformer Frequency Range: 20Hz To 20kHz Output Pad: 0dB, -10dB, -20dB Polar Patterns: Cardioid, Figure Of Eight And Omnidirectional Output Impedance: 150 Ohms Features Custom WA-12-B-60V Edge-Terminated, Dual-Backplate, All-Brass Vintage CK12-Style Capsule 3-Pin Gold Plated XLR Requires +48V Phantom Power Color: Black Includes Shock Mount And Hard Mount

Višestruko dokazani kompresori i pretpojačala poprilično su uzdrmali temelje muzičkog sveta kada pričamo o odnosu cene i kvaliteta. Nakon toga Warm Audio usmerio je pozornost na mikrofone pa su i lestvicu postavili izuzetno visoko: najveći legendarni FET kondenzatorski mikrofon velike membrane u istoriji - baziran na studijskom klasiku. Kardioidna, figure-8 i omni-usmerena polarna karakteristika, LK-12-B-60V Lens kondenzator CK12 kapsula, Custom CineMag USA transformator, potpuno diskretna signalna putanja s tantalum polistirenom + WIMA kondenzatori. Frekventni odziv: 20Hz do 20kHz, 10dB/20dB selektivno izlazno prigušenje, otpor: 150 Ohm, za rad ovog mikrofona potrebno je fantomsko napajanje. U kompletu s ovim mikrofonom dolazi i originalni shockmount nosač.

Chairman Microphone for Microphone discussion system The Apart MDS microphone discussion system is a highly flexible small to medium size tabletop discussion system. This easy to set up and to easy to use audio system is the perfect solution for meeting rooms, board rooms and medium conference rooms. This discussion system consists of a chairman unit (MDS.CHAIR) and up to 19 delegate units (MDS.DEL). The connection interface (MDS.INT) is located at the beginning of the microphone chain. This MDS system has a unique circuit loop design with an easy set-up using standard CAT5 cables for linking up to 20 units in a daisy chain (every microphone and switching adaptor can be located anywhere in the loop). When the chairman presses the mute button, only the chairman unit will be active and all delegates will be muted and deactivated. The delegates can press a button to talk into the flexible gooseneck microphone (no mute function). microphone type unidirectional condensor frequency response 80 Hz - 16 kHz system interconnection RJ45 - CAT5 cables, straight, according to EIA-568-B maximum SPL 100 dB for 1% THD dimensions (h x w x d) 54 x 110 x 165 mm dimensions with mic (h x w x d) 494 x 110 x 165 mm packing dimensions 120 x 195 x 455 mm net weight 730 g accessories supplied manual, microphone foam cap

Tehnička specifikacija # AKG-s Legendary 1" Edge-Terminated Large Diaphragm Sound # Outstanding Dynamic Range (up to 156 dB SPL, Ultra-Low Noise) # Roadworthy Design # Integrated Suspension to reduce mechanical Noise # Switchable 20 dB Attenuation Pad and Low Cut Switch # Rugged double mesh Grill for high RF immunity but unaffected Acoustics # All-metal Die-cast body with shock- and scratch-resistant Finish # Spider-type Shock Mount included # Metal Carrying Case included # Designed, Engineered and Built in Vienna, Austria Dodatne informacije AKGs industry-leading C 414 microphones are already a permanent fixture in the worlds biggest recording Studios and a highly respected work horse for independent artists, broadcasting, and on-stage miking as well. The new C 214 is designed as a cost-effective alternative to the high-end, industry-leading C 414 family. It captures sound combining one side of the legendary C 414 dual-capsule system and AKG-s patented Back-Plate Technology which results in an outstanding performance close to the famous C 414 B-XLS. timeline Like the C 414 models, the C 214 is capable of handling the rigors of high-pressure sound such as amplified guitars, with a sensitivity perfect for voice and orchestral instruments as well. Additionally, the microphone offers a 20 dB Attenuation pad, 13 dB noise floor, and a low cut switchall in an elegant but rugged package. Besides, the C 214 will also work on low phantom power voltages from 12 up to 48 volts. Additional features include an integrated suspension, a double mesh grill high RF immunity without affecting acoustics. The circuitry in the C 214 provides maximum SPL capability with minimum noise and the gold-plated XLR-type output connector offers loss-free signals. The C 214 comes complete with carrying case, windscreen, and spider suspension mount included.