Innovation ARX introduces the all-new ZoneMIX multimedia, multi-channel mixer. Great Features Wireless audio, USB and MiniJack inputs! Plus 2 x Balanced Low Noise Microphone pre-amps Plus a stereo Line In channel Plus all Inputs can be switched to Stereo Zone 1 or 2, or Both Plus Outputs can be switched to Mono for distributed systems AC Power The ZoneMIX is available as an AC specific 100 to 120V AC model or a 220 to 240V AC model. AC power is connected to the unit via a standard three pin IEC connector, with built-in fuse. Microphone Inputs: Electronically Balanced on XLR Connectors, switchable to Mono Stereo Line Inputs: Line level inputs on RCA Connectors Input Gain: Variable 0dB to 50dB on Mic/Line channels by rear panel trim control, plus Mic/Line input switch (–20dB) Channel Level: Infinity to +6dB Gain Frequency Response: 20-20KHz ± 1dB Distortion: Below .005% 100Hz to 10KHz Master Outputs: Electronically Balanced XLR, switchable to Mono Master Outputs Signal/Noise: -90dB unweighted. Max Output Level: +20dB Wireless Audio Receiver Specifications Range: Approx 2 - 4 metres Depends on paired source device LED Indicators: Scan Red LED Red LED Flashes Lock Blue LED Matching/Pairing: Blue LED Flashes Matched/Paired: Blue LED On Frequency 2.402 - 2.480 GHz Sensitivity -90dBM @0.1% BER USB Specifications Input Connector USB type B port Codec 24 bit High Resolution, 44.1 and 48K, program dependent USB Power Operating current via USB Port 80mA With its superb audio quality, headroom to spare, and intuitive interface, the ARX ZoneMIX is the total solution to today’s install requirements.

The four aux sends are ideal for routing to floor monitors and outboard time-based effects. A USB 1.1 port delivers 2-channel send and return capabilities via a Mac or Windows computer. There are stereo and mono main outputs in addition to alt and headphone outputs, and dual 12-segment LED meters that clearly indicate your master output level. Patch additional stereo sources into the RCA stereo return and 2-track inputs, then route them to the stereo bus, or mix them into the stereo channels. The stereo RCA output is handy for recording your mix to an external device such as a cassette deck or computer soundcard. 10 Mono Inputs There are 10 mono input channels with Neutrik connectors—XLR for balanced mic signals, and 1/4" for balanced/unbalanced line-level sources Four Stereo Inputs The four stereo input channels feature 1/4" connectors to accommodate stereo devices such as keyboards, synth modules, and external effects processors Flexible EQ Section All mono channels feature 3-band EQ with sweepable midrange, while the stereo channels offer 2-band EQ Inserts Inserts on all mono channels and the stereo output provide easy integration of analog outboard gear such as hardware compressors and equalizers Independent Aux Sends Four mono aux sends with independent level controls allow versatile signal routing to floor monitors and external effects processors USB Connection A USB 1.1 port allows direct connection to Mac and Windows computers for stereo audio I/O Flexible Outputs The ZED-18 offers balanced XLR stereo main outputs, a 1/4" mono main output, 1/4" and 3.5mm stereo headphone outputs, and a source-selectable stereo alt output Total # Of Inputs 18 Mic/Line Inputs 10 x 3-Pin XLR Female Mic Inputs (Balanced) 10 x 1/4" TRS Line Inputs (Balanced/Unbalanced) Stereo Line Inputs 8 x 1/4" TRS Line Inputs (Four Stereo Pairs, Balanced/Unbalanced) In-Line Inputs/Returns No Aux Sends 4 x 1/4" TRS Mono (Balanced) Aux Returns 2 x RCA Coaxial Line Inputs (One Stereo Pair, Unbalanced) Inserts 10 x 1/4" TRS on Mono Channels (Unbalanced) 2 x 1/4" TRS on Stereo Bus (Unbalanced) BUS (Group) Outputs No Main Outputs 2 x 3-Pin XLR Male (One Stereo Pair, Balanced) 1 x 1/4" TRS Mono (Balanced) Monitor Outputs 2 x RCA Coaxial Alt Outputs (One Stereo Pair, Unbalanced) 1 x 1/4" TRS Stereo Headphone Output (Unbalanced) 1 x 1/8" / 3.5 mm TRS Stereo Headphone Output (Unbalanced) 2-Track I/O 2 x RCA Coaxial 2-Track Input (One Stereo Pair, Unbalanced) 2 x RCA Coaxial 2-Track Output (One Stereo Pair, Unbalanced) ALT I/O 1 x USB Type-B (2-Channel Send/Return) EQ Section High (All Channels): ±15 dB at 12 kHz Mid (Mono Channels): ±15 dB at Selectable Frequency (120 Hz to 4 kHz, Sweepable) Low (All Channels): ±15 dB at 80 Hz High-Pass Filter 12 dB/Octave at 100 Hz, Switchable Solo/Mute Mute and PFL Solo Channel Level Control 100 mm Fader Trim/Gain Control Rotary Control Gain Range Mic Inputs: -6 to +63 dB Line Inputs: -10 to +26 dB Stereo Inputs: -∞ to +10 dB Faders: -∞ to +10 dB Returns: -∞ to +10 dB Aux Masters: -∞ to +6 dB Alt Out: -∞ to +6 dB Phantom Power +48 VDC, Globally Selectable Metering Dual 12-Segment LEDs Peak LED per Channel USB Specification USB 1.1 Compliant Bit Depth USB: 16-Bit Sample Rates USB: 32 kHz, 44.1 kHz, or 48 kHz Nominal Input Level Mic Input: -63 to +6 dBu Mono Line Input: -26 to +10 dBu Stereo Line Input: 0 dBu (+10 dB with Control Off) Insert Point: 0 dBu Maximum Input Level Mic Input: +17 dBu Mono Line Input: +30 dBu Insert Point: +21 dBu Nominal Output Level 0 dBu Maximum Output Level +21 dBu Frequency Response Mic In to Main Out (30 dB Gain): 20 Hz to 20 kHz (+0.5 dB, -1 dB) Line In to Main Out (0 dB Gain): 10 Hz to 30 kHz (+0.5 dB, -1 dB) Stereo In to Main Out: 10 Hz to 30 kHz (+0.5 dB, -1 dB) THD + N Mic In to Main Out (0 dB Gain, 1 kHz, +10 dBu Out): 0.004% Mic In to Main Out (30 dB Gain, 1 kHz): 0.014% Line In to Main Out (0 dB Gain, 1 kHz, 0 dBu): 0.005% Stereo In to Main Out (0 dB Gain, 1 kHz, +10 dBu): 0.003% Headroom Analog Headroom from Nominal (0 VU): 21 dB USB In and Out Headroom from Nominal (0 VU): 14 dB Noise Mic Pre EIN: -127 dBu (Maximum Gain, 150-Ohm Input, 22 Hz to 22 kHz) Main Out: -84 dBu (L/R Faders at 0, 22 Hz to 22 kHz) Power Consumption 40 W Maximum Power Requirements 100 to 240 VAC, 47 to 63 Hz Dimensions 18.3 x 3.9 x 18.3" / 46.4 x 9.8 x 46.5 cm Weight 18.7 lb / 8.5 kg Packaging Info Package Weight 21.7 lb Box Dimensions (LxWxH) 24.2 x 23.5 x 10.2"