Semerinzi tipa B dimenzije 85x105x10 mm B – od NBR gume, kompletno standardno izvođenje sa metalnom spoljnom površinom dimenzije 22x35x7 mm. Proizvođač - Inis, Niš

Semerinzi tipa B dimenzije 80x100x12 mm B – od NBR gume, kompletno standardno izvođenje sa metalnom spoljnom površinom dimenzije 22x35x7 mm. Proizvođač - Inis, Niš

Tranzistori BDX 53 B - polovni ali ispravni Na malim hladnjacima izolovani po dva komada na hladnjaku , ali ima i po jedan komad na hladnjaku Licitirate za 10 komada

POMORSKE PRIPOVETKE AUTOR: B. ŽITKOV IZDAVAČ: PROSVETA, BEOGRAD GODINA IZDANJA: 1949. MEKE KORICE PISMO: ĆIRILICA BROJ STRANA: 150 STR. ILUSTROVANO STANJE KNJIGE DOBRO TROŠKOVE SLANJA SNOSI KUPAC LIČNO PREUZIMANJE MOGUĆE U CENTRU BEOGRADA K31G

Semerinzi tipa B dimenzije 48x69x8 mm Si B – od silikonskog kaučuka, kompletno standardno izvođenje sa metalnom spoljnom površinom dimenzije 22x35x7 mm. Proizvođač - Inis, Niš

- Podnožje releja za montažu na DIN šinu, - Za tip releja: DPDT.

Stanje ko na slici odlicno ocuvana 292 strane

VRHOVI ZA LEMILICE TIP 900M-T B ZLATNI. PO NAJJEFTINIJIM CENAMA U SRBIJI.VRHOVI SU ZA SMD TEHNOLOGIJU. NA VISE KOMADA MOZEMO SE DOGOVORITI OKO CENE. SVE STO VAS ZANIMA PITAJTE. ZNACI DOBIJATE IH ISTO KAO NA SLICI

IMA POSVETU BIVSOJ VLASNICI NA BELOJ PREDSTRANICI.. NA POCETKU KNJIGE PAR PASUSA PODVUCENO.. STRANICE SA SPOLJASNJE STRANE POZUTELE OD STAROSTI.. MLADOST, ZAGREB, 1988 257 STRANA

- Napojni kabl, - Utikač 2.1x5.5mm - USB micro B utikač, - Radni napon: 5V, - Dužina kabla: 0.2m.

Naslov: Kafkin prijatelj i druge pripovetke Autor: Isak Baševis Singer Izdavač: Beograd : Srpska književna zadruga Godina izdanja: 1981, 332 str. ; 19 cm Povez: Tvrd Latinica Stanje 4 S8 Pogledajte ostale knjige,časopise i stripove u ponudi http://www.kupindo.com/Clan/bdenis/SpisakPredmeta http://www.limundo.com/Clan/bdenis/SpisakAukcija

Tvrd povez. Izdanje SKZ, Beograd, 1981. godine. Izuzetno dobro očuvana knjiga, 332. strane. dule, veselina nikolića, 2022.

- Napojni kabl, - Utikač 2.1x5.5mm - USB micro Type B utičnica, - Radni napon: 5V, - Radna jačina struje: 3A, - Dužina kabla: 0.2m.

Mek povez - 253 strane LAGUNA 2015 Korice sa vidljivim znacima korišćenja Unutrašnjost dobro očuvana - bez pisanja i podvlačenja B B

NOVA AMERIČKA PRIPOVETKA Naslov Nova američka pripovetka / izbor, predgovor i prevod Gordana B. Todorović Vrsta građe kratka proza Ciljna grupa odrasli, opšte (lepa književnost) Jezik srpski Godina 1986 Izdavanje i proizvodnja Beograd : Srpska književna zadruga, 1986 (Beograd : Kultura) Fizički opis XV, 280 str. ; 19 cm Drugi autori - osoba Todorović, Gordana B. = Todorović, Gordana B. Zbirka Srpska književna zadruga ; ǂkolo ǂ79, ǂknj. ǂ522 ISBN 86-379-0005-4 (karton) Napomene Str. [VII]-XV: Pripovetka ili igra / Gordana B. Todorović Napomena: str. 279-280 Beleške o piscima: str. [269]-278. Predmetne odrednice Američka pripovetka -- 20. v. Dobro očuvana knjiga. ns

P12 Description: Raspberry Pi B + special accessories T-type GPIO expansion board + raspberry pie 40P cable Package Included: 1 x T GPIO Breakout Expansion Board +40Pin Cable DIY Kit For Raspberry Pi B+ 3 2

Naslov Nova engleska pripovetka / izbor, predgovor i prevod Gordana B. Todorović Vrsta građe kratka proza Ciljna grupa odrasli, opšte (lepa književnost) Jezik srpski Godina 1982 Izdavanje i proizvodnja Beograd : Srpska književna zadruga, 1982 (Beograd : Kultura) Fizički opis XV, 284 str. ; 19 cm Drugi autori - osoba Todorović, Gordana B. = Todorović, Gordana B. Zbirka Srpska književna zadruga ; ǂkolo ǂ75, ǂknj. ǂ500 (Karton) Napomene Tiraž 4.000 Str. [IX]-XV: Vreme pripovetke / Gordana B. Todorović Beleške o piscima: str. 281-284. Predmetne odrednice Drebl, Margaret, 1939- -- `Hasanova kula` Lodž, Dejvid Džon, 1935- -- `Čovek koji nije hteo da ustane` Tenant, Ema Kristina, 1937- -- `Krevet koji je Mik napravio` Bredberi, Malkom Stenli, 1932- -- `Šta mislite ko ste?` Makjuin, Jan Rasel, 1948- -- `Razmišljanja jednog izdržavanog majmuna` Veldon, Fej, 1931- -- `Čovek bez očiju` Kvin, En, 1936- -- `Mamalog` Gordon, Džajls, 1940- -- `Poseta muzeju` Josipovici, Gabrijel Dejvid, 1940- -- `Smrt reči` Bruk-Rouz, Kristin, 1926- -- `Džordž i serafim` Džonson, Brajan Stenli Vilijam, 1933-1973 -- `Svako poznaje nekoga ko je umro` Karter, Andžela Oliv, 1940-1992 -- `Krvava odaja` Fuler, Piter, 1947- -- `Robinsonov trojedan greh` Naj, Robert, 1939- -- `Ista stara priča` Engleska pripovetka MG133

U vrlo dobrom stanju Nova engleska pripovetka / izbor, predgovor i prevod Gordana B. Todorović Jezik srpski Godina 1982 Srpska književna zadruga, 1982 (Beograd : Kultura) Fizički opis XV, 284 str. ; 19 cm Drugi autori - osoba Todorović, Gordana B. = Todorović, Gordana B. Zbirka Srpska književna zadruga kolo 75, knj. 500 Biblioteka Kolo Tiraž 4.000 Str. [IX]-XV: Vreme pripovetke / Gordana B. Todorović Beleške o piscima: str. 281-284. Predmetne odrednice Drebl, Margaret, 1939- -- `Hasanova kula` Lodž, Dejvid Džon, 1935- -- `Čovek koji nije hteo da ustane` Tenant, Ema Kristina, 1937- -- `Krevet koji je Mik napravio` Bredberi, Malkom Stenli, 1932- -- `Šta mislite ko ste?` Makjuin, Jan Rasel, 1948- -- `Razmišljanja jednog izdržavanog majmuna` Veldon, Fej, 1931- -- `Čovek bez očiju` Kvin, En, 1936- -- `Mamalog` Gordon, Džajls, 1940- -- `Poseta muzeju` Josipovici, Gabrijel Dejvid, 1940- -- `Smrt reči` Bruk-Rouz, Kristin, 1926- -- `Džordž i serafim` Džonson, Brajan Stenli Vilijam, 1933-1973 -- `Svako poznaje nekoga ko je umro` Karter, Andžela Oliv, 1940-1992 -- `Krvava odaja` Fuler, Piter, 1947- -- `Robinsonov trojedan greh` Naj, Robert, 1939- -- `Ista stara priča` Engleska pripovetka

Mek povez - 288 strana NEOPRESS BEOGRAD 2018 Unutrašnjost dobro očuvana - bez pisanja i podvlačenja Stanje kao na fotografijama B - A

Mek povez - 261 strana USKOR BEOGRAD 2002 Korice sa vidljivim znacima korišćenja Unutrašnjost dobro očuvana - bez pisanja i podvlačenja B - A

Mek povez - 233 strana SLOVO LJUBVE MLADINSKA KNJIGA 1979 Korice sa vidljivim znacima korišćenja Unutrašnjost dobro očuvana - bez pisanja i podvlačenja B - E

ŠIFRA: 1359 - Kutija sa zakretnim prekidačem, - Idealna za upravljanje industrijskim mašinama, - Materijal: ABS, - Model: EL1-B, - Stepen IP zaštite: IP44, - Boja: crno/bela, - Sadrži normalno otvoreni (NO) kontakt, - Dimenzije: 68x68x50mm.

- Obeleživači kablova žute boje, - Dimenzije: 1.5mm², - Komada: 500, - Po 50 komada od svake oznake, - Oznake: slova od A do J (A, B, C, D, E, F, G, H, I, J).

- Univerzalna ploča za GPIO proširenje, - Kompatibilan sa sledećim Raspberry Pi modelima: 3, 2, B+, - Ovom ekspanzijom jedan red GPIO porta možete proširiti u tri reda GPIO portova, - Dimenzije ploče: 55 x 66mm.

K15 Multi-mode delay time relay module 32 modes of pulse delay time delay time delay high precision programmable optocoupler isolation 5 v12v24v optional The multi-function relay control module is specially designed for users with various requirements. It adopts the microcontroller as the main control unit with 32 functions preset. Users can use the corresponding specific functions according to the actual requirements. Can be used in water pump control, motor control, lamp belt control, solenoid valve control and so on. 1. New upgrade, increasing the number of module functions to 32, to meet more application requirements. 2. Anti-backconnection function of power supply, which will not damage the module due to wrong power supply. 3. Timing accuracy to 0.01 second. 0.1 seconds (minimum) ~999 minutes (maximum) optional 4.. Low power saving Settings, you can turn off the display area. Product parameters: Commodity name: Multi-function delay relay Relay V number: DC5V/12V/24V optional Input voltage: 5V Version: DC5V power supply; 12V version: DC12V power supply; 24V version: DC24V power supply Output load: dc 30V, Max 10A. Ac 250V, maximum 5A. Trigger signal: 5V version (high level: 5V); Both 12V (HIGH level: 12V) and 24V (high level: 5V) low levels are 0V. Static current: 20mA Operating current: 60mA Operating temperature: -25℃-85℃ Power off memory: Yes Product weight: ≈26g, product size: 65 x 34.3 X 17.5 (MM) Manual measurement is for reference only. The actual size is subject to the material object Warm tips: 1. Please select the required V version (according to the relay identification difference above, the relay is 5V instant 5V version) to avoid wrong purchase. 2. The output of relay is passive contact without current output to control the on-off effect of a line. 3. Please input the trigger voltage strictly according to the selected version Instructions for use: Working mode (32 kinds) : P-11: Inching mode with suction and no disconnection. P-12: Self-locking mode, and the relay state is reversed once after each trigger. P-13: When triggered, the relay pulls in and disconnects after A time delay; Invalid trigger during delay. P-14: When triggered, the relay pulls in and disconnects after A time delay; Retiming is triggered during a delay. P-15: When triggered, the relay pulls in and disconnects after A time delay; Accumulative timing is triggered during delay. P-16: When triggered, the relay pulls in and disconnects after A time delay; Trigger reset (relay disconnection) during delay. P-17: When triggered, the relay pulls in during the signal duration, the input signal disappears, and the relay is disconnected after A time delay; During the delay, the relay is triggered again to keep the suction, and the timing stops until the last signal disappears, and the relay is disconnected after the delay of time A. P-18: After the power is switched on, the relay will pull in immediately and disconnect after A second delay; Until the next power cut. P-21: Signal feed, relay suction after delay A time. P-22: Give the continuous signal. After A time, the relay pulls in; The signal disappears and the relay disconnects. P-23: When the signal disappears beyond time A, the relay pulls in; There is a signal, the relay is off. P-24: Give the continuous signal. After A time, the relay pulls in; When the signal disappears beyond time A, the relay is disconnected. P-25: Give the continuous signal. After A time, the relay pulls in; Give the continuous signal again, after A time, the relay is disconnected P-26: Signal is given and the relay is disconnected after absorbing A time; After the signal disappears, the relay pulls in again for A second and then stops P-27: the relay with pulse signal (rising edge or falling edge) is disconnected, and there is no pulse signal. The relay will be absorbed after A time delay (both continuous high level and continuous low level are considered to have no pulse). P-28: After power on, the relay will pull in after delay time A until power off. P-31: After power on, the relay pulls in time A and disconnects time B, infinite cycle; The power is off. P-32: With continuous signal, the relay pulls in A time, disconnects B time, infinite cycle; The signal disappears and the loop is terminated. P-33: Give A signal, the relay pulls in A time, disconnects B time, infinite cycle; Give the signal one more time to stop the loop. P-34: After power on, the relay will pull in after delay time A, and disconnect after pull in time B. P-35: Signal is given once. After delay of time A, the relay pulls in and shuts off after time B. P-36: Give the continuous signal. After A time, the relay will pull in and disconnect after B time. Signal disappeared, time reset, relay disconnected. P-37: There is A signal. The relay will automatically disconnect after it pulls in time A, and then timing time B after it is disconnected. The signal trigger will be invalid within time A+B. P-38: There is A signal. The relay will automatically disconnect after absorbing A time, and then timing B time after disconnecting, and automatically disconnect after absorbing A time again. P-41: No action on signal; Signal vanishing trigger; The relay is disconnected after absorbing the delay time of A. P-42: the signal disappears and the relay pulls in after A time delay; The relay disconnects after B time delay. P-43: The signal disappears, and the relay pulls in after the disappearance exceeds time A; The relay disconnects after B time delay. P-44: After power on, the relay attracts time A and disconnects time B; The relay disconnects and stops after C cycles. P-45: No action after power on; After giving the signal, the relay attracts A time and disconnects B time; The relay disconnects and stops after C cycles. Give the signal, then execute again. P-46: When the signal is given more than A times, the relay pulls in; Keep the suction; The power is off. P-47: When the signal is given more than A times, the relay pulls in; Disconnect after suction B time. P-48: In C time, after continuous signal feeding for more than A times, the relay will disconnect and stop after absorbing B time. Table showing the position of the decimal point and the unit of time it represents: The decimal point is in the hundreds place, and the time range is 0.01~9.99 seconds Xx. X decimal point in ten place, time range 0.1~99.9 seconds XXX has no decimal point and the time range is 1-999 seconds XXX. The decimal point is in one place and the time range is 1-999 minutes Turn off display: In non-set state, press K4 to turn off the display screen, then press again to open it again. Description of working parameters setting: Hold down the K1 key and hold it until p-XX appears on the screen 2 seconds later. Press K2 and K3 to change the working mode. After selecting the working mode, press K1 to enter the time setting of A, and Axxx is displayed on the screen. At this time, press K2 and K3 to modify the time parameters of A, press K2 and K3 to add and subtract 1 for short, long to add and subtract 10 for fast, and press K4 to set the position of the decimal point. After setting time A, press K1 to set time B. BXXX is displayed on the screen. At this time, press K2 and K3 to modify time parameters of B; press K2 and K3 to add or subtract 1 for short; press K4 to add or subtract 10 for long; and press K4 to set the position of the decimal point. After setting the B time (in the case that the mode has C cycle number parameter), press K1 to set the C cycle number, and the screen shows Cxxx. At this time, press K2 and K3 to modify the C cycle number parameter, press K2 and K3 to add or subtract 1 for short, and press long to add or subtract 10 for fast. After setting, press the K1 key one last time to exit the setting state and save all parameters. Description of wiring port: DC+ input DC power positive pole DC- input DC power negative pole IN+ signal input positive pole IN- negative input terminal NO relay always start interface, relay suction and COM short connected, not closed suspension; COM relay common end interface Normally closed end interface of NC relay. When the relay fails to suck, it is short connected with COM. When the pull, it is suspended.