glanc -il tramonto dei vivi-morenti -la vicina di casa -piu forte della carne -in linea con l`aldila A4,c-b

Jedan od Teks maksija koji je nacrtao čuveni španski crtač Hose Ortiz.Stanje solidno, pogledati slike. Meke korice, c/b, oko 300 strana.

NINDŽA integral 1 - Miodrag Ivanović Mikica Izdavač: FORMA B Beograd Godina izdanja: 2019. Povez: broš Broj strana: 168 Pismo: latinica Stanje: dobro

Strip sa slika. Korica B. Glanc u foliji. Slike spoljašnosti su u visokoj rezoluciji i uvećanjem možete videti kompletnu spoljašnost. U unutrašnjosti nije nigde švrljano.

-LS BKN C63 -LS BKN-b C32 -LS BKN C25 -LS BKN C40 -Cena je po komadu. -Za kupovinu svih tropolnih automatskih osiguraca cena je samo 3000 dinara!

Ovaj senzor je namenjen za merenje UV-A i UV-B zračenja. Uz pomoć fotodetektora, pretvara jačinu struje u napon, koji se dalje šalje kao analogni signal. Šifra: B1082

Izdavač: Forma B Naslovna strana: Miodrag Ivanović – Mikica Scenario: Branislav Peterman / Petar Aladžić / Svetozar Obradović Crtež: Miodrag Ivanović – Mikica / Predrag Ivanović – Peka Format: A4 Povez: meki Boja: crno-belo Broj strana: 168

P04 The multi-function relay control module is specially designed for users with many different needs. It adopts a microcontroller as the main control unit and presets 32 kinds of functions, and users can use corresponding specific functions according to actual needs. It can be applied to water pump control, motor control, lamp strip control, solenoid valve control, etc. 1. New upgrade, the module function is increased to 32 kinds, to meet more application needs. 2. The power supply anti-reverse function will not damage the module due to wrong power supply. 3. Timing accuracy to 0.01 seconds timing. 0.1 seconds (minimum) ~ 999 minutes (maximum) optional 4. Low power consumption power saving setting, you can turn off the display area. Product parameters: Product Name: Multi-function time delay relay Relay V number: DC5V/12V/24V optional Input voltage: 5V version: DC5V power supply; 12V version: DC12V power supply; 24V version: DC24V power supply Output load: within 30V DC, maximum 10A. Within 250V, maximum 5A. Trigger signal: 5V version (high level: 5V); 12V version (high level: 12V), 24V version (high level: 24V) The low level is 0V. Quiescent current: 20mA Working current: 60mA Working temperature: -25℃-85℃ Power-off memory: Yes Product weight: ≈26g, product size: 65* 34.3 * 17.5 (MM L*W*H) The manual measurement is for reference only, the actual size is subject to the actual product Product Features: Wiring port description: DC+ Input DC power supply positive DC- Input DC power supply negative IN+ signal input positive IN- signal input negative NO relay normally open interface, the relay is short-circuited with COM when it is engaged, and it is suspended when not engaged; COM relay common terminal interface NC relay normally closed terminal interface, when the relay is not pulled in, it is short-circuited with COM, and it is left floating when pulled in; Instructions for use: Working mode (32 kinds): P-11: In jog mode, there is signal pull-in and no signal disconnect. P-12: Self-locking mode, the state of the relay reverses once after each trigger. P-13: After triggering, the relay will pull in and disconnect after delaying A time; the trigger will be invalid during the delay. P-14: After triggering, the relay will pull in, and it will be disconnected after the delay of A time; the trigger will be re-timed during the delay. P-15: After triggering, the relay will pull in, and it will be disconnected after the delay time A; during the delay time, the accumulated timer will be triggered. P-16: After triggering, the relay will pull in and disconnect after delaying time A; during the delay, a reset will be triggered (relay disconnected). P-17: After triggering, the relay pulls in for the duration of the signal, the input signal disappears, and then disconnects after the delay of A time; during the delay time, the relay is triggered again to keep the pull in, and the timing stops until the last signal disappears, delay A time Then disconnect. P-18: The relay will pull in immediately after power-on, and it will be disconnected after a delay of A second; until the next power-on. P-21: Give the signal, the relay will pull in after the delay of A time. P-22: Give a continuous signal, after the time exceeds A, the relay will pull in; when the signal disappears, the relay will open. P-23: When the signal disappears for more than A time, the relay pulls in; when there is a signal, the relay disconnects. P-24: Give a continuous signal. After the time exceeds A, the relay will pull in; when the signal disappears for more than time A, the relay will open. P-25: Give a continuous signal, the relay pulls in after exceeding A time; give a continuous signal again, the relay turns off after exceeding A time P-26: Give a signal, the relay will disconnect after A time pull-in; after the signal disappears, the relay will stop after A second pull-in. P-27: There is a pulse signal (rising edge or falling edge), the relay is disconnected, there is no pulse signal, the relay pulls in after the delay of A time (continuous high level or continuous low level are considered as no pulse). P-28: After power on, the relay will pull in after the delay time A until power off. The P-31: After power-on, the relay pulls in time A and turns off time B, in an infinite loop; power off stops. P-32: There is a continuous signal, the relay pulls in A time, disconnects B time, infinite loop; the signal disappears, and the loop is terminated. P-33: Give a signal once, the relay pulls in A time, disconnects B time, infinite loop; give another signal to terminate the loop. P-34: After power-on, the relay pulls in after the delay time A, and disconnects after pulling in the time B. P-35: Give a signal, after the delay time A, the relay pulls in and pulls off after the time B pulls in. P-36: Continuous signal is given. After the time A is exceeded, the relay is switched on and disconnected after the time B is switched on; the signal disappears, the timing is cleared, and the relay is turned off. P-37: There is a signal, the relay will be automatically disconnected after the A time is closed, and the B time will be counted after the disconnection. The signal trigger is invalid during the A+B time. P-38: There is a signal, the relay will be automatically disconnected after the time of pull-in A, after the time B is counted after the disconnection, it will be automatically disconnected after the time of pull-in A again. The P-41: The signal does not act; the signal disappears and triggers; the relay absorbs and merges after a delay of A time to disconnect. P-42: The signal disappears. After the delay time A, the relay pulls in; after the delay time B, the relay disconnects. P-43: The signal disappears. After the disappearance exceeds the time A, the relay pulls in; after delaying the time B, the relay opens. P-44: After power-on, the relay pulls in time A and turns off time B; after the cycle C times, the relay turns off and stops. P-45: No action after power on; after the signal is given, the relay pulls in the A time and disconnects the B time; the relay is turned off and stopped after C cycles; when the signal is given, it is executed again. P-46: After the signal is given more than A times, the relay pulls in; keeps pulling in; the power stops. P-47: After the signal exceeds A times, the relay pulls in; when it pulls in for B time, it is disconnected. P-48: During the C time, after continuously giving the signal more than A times, the relay will disconnect and stop after B time. Description table of the position of the decimal point and the time unit it represents: x.xx Decimal point is in the hundreds place, time range 0.01~9.99 seconds xx.x decimal point is in the tenth place, time range 0.1~99.9 seconds xxx has no decimal point, time range is 1~999 seconds xxx. The decimal point is in single digits, the time range is 1~999 minutes Turn off the display: In the non-setting state, press the K4 key to turn off the display, then press it again to turn on. Description of working parameter setting: Hold down the K1 key without letting go, after 2 seconds the display shows P-xx, press K2 and K3 to change the working mode. After selecting the working mode, short press K1 to enter the A time setting, the screen displays Axxx, then press K2 and K3 to modify the A time parameters, K2 and K3 key short press plus or minus 1, long press to quickly add and subtract 10, Press the K4 key to set the position of the decimal point. After setting the A time, press the K1 key to set the B time, the screen displays bxxx, then press the K2 and K3 keys to modify the B time parameters, K2 and K3 keys short press plus or minus 1, long press to quickly add and subtract 10, Press the K4 key to set the position of the decimal point. After setting the B time, (if the mode has the C cycle number parameter), then press the K1 key to set the C cycle number, the screen displays Cxxx, then press the K2 and K3 keys to modify the C cycle number parameter, K2 and K3 keys Short press to increase and decrease by 1, long press to increase and decrease by 10. After setting, press the K1 key once to exit the setting state and save all parameters.

P04 The multi-function relay control module is specially designed for users with many different needs. It adopts a microcontroller as the main control unit and presets 32 kinds of functions, and users can use corresponding specific functions according to actual needs. It can be applied to water pump control, motor control, lamp strip control, solenoid valve control, etc. 1. New upgrade, the module function is increased to 32 kinds, to meet more application needs. 2. The power supply anti-reverse function will not damage the module due to wrong power supply. 3. Timing accuracy to 0.01 seconds timing. 0.1 seconds (minimum) ~ 999 minutes (maximum) optional 4. Low power consumption power saving setting, you can turn off the display area. Product parameters: Product Name: Multi-function time delay relay Relay V number: DC5V/12V/24V optional Input voltage: 5V version: DC5V power supply; 12V version: DC12V power supply; 24V version: DC24V power supply Output load: within 30V DC, maximum 10A. Within 250V, maximum 5A. Trigger signal: 5V version (high level: 5V); 12V version (high level: 12V), 24V version (high level: 24V) The low level is 0V. Quiescent current: 20mA Working current: 60mA Working temperature: -25℃-85℃ Power-off memory: Yes Product weight: ≈26g, product size: 65* 34.3 * 17.5 (MM L*W*H) The manual measurement is for reference only, the actual size is subject to the actual product Product Features: Wiring port description: DC+ Input DC power supply positive DC- Input DC power supply negative IN+ signal input positive IN- signal input negative NO relay normally open interface, the relay is short-circuited with COM when it is engaged, and it is suspended when not engaged; COM relay common terminal interface NC relay normally closed terminal interface, when the relay is not pulled in, it is short-circuited with COM, and it is left floating when pulled in; Instructions for use: Working mode (32 kinds): P-11: In jog mode, there is signal pull-in and no signal disconnect. P-12: Self-locking mode, the state of the relay reverses once after each trigger. P-13: After triggering, the relay will pull in and disconnect after delaying A time; the trigger will be invalid during the delay. P-14: After triggering, the relay will pull in, and it will be disconnected after the delay of A time; the trigger will be re-timed during the delay. P-15: After triggering, the relay will pull in, and it will be disconnected after the delay time A; during the delay time, the accumulated timer will be triggered. P-16: After triggering, the relay will pull in and disconnect after delaying time A; during the delay, a reset will be triggered (relay disconnected). P-17: After triggering, the relay pulls in for the duration of the signal, the input signal disappears, and then disconnects after the delay of A time; during the delay time, the relay is triggered again to keep the pull in, and the timing stops until the last signal disappears, delay A time Then disconnect. P-18: The relay will pull in immediately after power-on, and it will be disconnected after a delay of A second; until the next power-on. P-21: Give the signal, the relay will pull in after the delay of A time. P-22: Give a continuous signal, after the time exceeds A, the relay will pull in; when the signal disappears, the relay will open. P-23: When the signal disappears for more than A time, the relay pulls in; when there is a signal, the relay disconnects. P-24: Give a continuous signal. After the time exceeds A, the relay will pull in; when the signal disappears for more than time A, the relay will open. P-25: Give a continuous signal, the relay pulls in after exceeding A time; give a continuous signal again, the relay turns off after exceeding A time P-26: Give a signal, the relay will disconnect after A time pull-in; after the signal disappears, the relay will stop after A second pull-in. P-27: There is a pulse signal (rising edge or falling edge), the relay is disconnected, there is no pulse signal, the relay pulls in after the delay of A time (continuous high level or continuous low level are considered as no pulse). P-28: After power on, the relay will pull in after the delay time A until power off. The P-31: After power-on, the relay pulls in time A and turns off time B, in an infinite loop; power off stops. P-32: There is a continuous signal, the relay pulls in A time, disconnects B time, infinite loop; the signal disappears, and the loop is terminated. P-33: Give a signal once, the relay pulls in A time, disconnects B time, infinite loop; give another signal to terminate the loop. P-34: After power-on, the relay pulls in after the delay time A, and disconnects after pulling in the time B. P-35: Give a signal, after the delay time A, the relay pulls in and pulls off after the time B pulls in. P-36: Continuous signal is given. After the time A is exceeded, the relay is switched on and disconnected after the time B is switched on; the signal disappears, the timing is cleared, and the relay is turned off. P-37: There is a signal, the relay will be automatically disconnected after the A time is closed, and the B time will be counted after the disconnection. The signal trigger is invalid during the A+B time. P-38: There is a signal, the relay will be automatically disconnected after the time of pull-in A, after the time B is counted after the disconnection, it will be automatically disconnected after the time of pull-in A again. The P-41: The signal does not act; the signal disappears and triggers; the relay absorbs and merges after a delay of A time to disconnect. P-42: The signal disappears. After the delay time A, the relay pulls in; after the delay time B, the relay disconnects. P-43: The signal disappears. After the disappearance exceeds the time A, the relay pulls in; after delaying the time B, the relay opens. P-44: After power-on, the relay pulls in time A and turns off time B; after the cycle C times, the relay turns off and stops. P-45: No action after power on; after the signal is given, the relay pulls in the A time and disconnects the B time; the relay is turned off and stopped after C cycles; when the signal is given, it is executed again. P-46: After the signal is given more than A times, the relay pulls in; keeps pulling in; the power stops. P-47: After the signal exceeds A times, the relay pulls in; when it pulls in for B time, it is disconnected. P-48: During the C time, after continuously giving the signal more than A times, the relay will disconnect and stop after B time. Description table of the position of the decimal point and the time unit it represents: x.xx Decimal point is in the hundreds place, time range 0.01~9.99 seconds xx.x decimal point is in the tenth place, time range 0.1~99.9 seconds xxx has no decimal point, time range is 1~999 seconds xxx. The decimal point is in single digits, the time range is 1~999 minutes Turn off the display: In the non-setting state, press the K4 key to turn off the display, then press it again to turn on. Description of working parameter setting: Hold down the K1 key without letting go, after 2 seconds the display shows P-xx, press K2 and K3 to change the working mode. After selecting the working mode, short press K1 to enter the A time setting, the screen displays Axxx, then press K2 and K3 to modify the A time parameters, K2 and K3 key short press plus or minus 1, long press to quickly add and subtract 10, Press the K4 key to set the position of the decimal point. After setting the A time, press the K1 key to set the B time, the screen displays bxxx, then press the K2 and K3 keys to modify the B time parameters, K2 and K3 keys short press plus or minus 1, long press to quickly add and subtract 10, Press the K4 key to set the position of the decimal point. After setting the B time, (if the mode has the C cycle number parameter), then press the K1 key to set the C cycle number, the screen displays Cxxx, then press the K2 and K3 keys to modify the C cycle number parameter, K2 and K3 keys Short press to increase and decrease by 1, long press to increase and decrease by 10. After setting, press the K1 key once to exit the setting state and save all parameters.

- Prstenasta fluo cev za lupu, - Zamena za oštećene ili pregorele cevi, - Upotrebljiva za većinu lampi sa lupom (preporučuje se za model NKL02, NKL03), - Napon napajnja: 230VAC, - Snaga: 22W, - Temperatura boje: 6400K, - Jačina svetlosti: 1050lm, - Klasa energetske efikasnosti: B, - Stepen IP zaštite: IP20, - Prečnik: 205mm (T8).

- Prstenasta fluo cev za lupu, - Zamena za oštećene ili pregorele cevi, - Upotrebljiva za većinu lampi sa lupom (preporučuje se za model NKL01), - Napon napajnja: 230VAC, - Snaga: 22W, - Temperatura boje: 6400K, - Jačina svetlosti: 1250lm, - Klasa energetske efikasnosti: B, - Stepen IP zaštite: IP20, - Prečnik: 184mm (T5).

OPIS SKINUT SA NETA,,, UI 39-Flachtransformator 24 VA Primär: 2 x 115 V Sekundär: 2 x 12 V 2 x 1000 mA 24 VA - Neuteil - Daten für BV039/5239.0L Print-Flachtrans- formatoren Typ: UI 39/17 ( L x B x H ) 68 x 57 x 32 mm

Scenario Đanfranko Manfredi Epizode: 61 Isprepletene osvete, crtež Bruno Ramela 62 Meta, crtež Ivo Milaco 63 Banda nevinih, crtež Paskvale Frizenda Naslovna strana integrala Goran Parlov Izdavač Libellus, biblioteka Magični Vjetar, knjiga br. 21, format 165 x 215 mm, 294 strane, C/B, latinica, tvrd povez Strip je NOV, nekorišćen, GLANC!

Feature： 1, this module is a pulse generation module, supply the control signal to stepper driver. To control the stepper motor, it must be equipped with a drive. 2, this simple controller + stepper motor + stepper motor + DC power supply can be composed of a simple set of control platform. 3, the controller has high 5.4k-160khz, middle 540-16.6khz, low 80-2.4khz total of 3 kinds of low frequency signal can be used to select the jumper. 4, can produce pulse signal, can also produce PWM signal, can choose the jumper. 5, the frequency of measurement: PUL and common cathode end. Different stepper driver may mark different name EN=ENA=FREE Enable PUL=PULS=CLK Pulse DIR=CW=CWW Direction Common anode Connection method (B) EN+ PUL+ DIR+ connect together to com+。 EN- connect EN PUL- connect CLK DIR- connect DIR Common cathode Connection method (B) EN- PUL- DIR- connect together to com-。 EN+ connect EN PUL+ connect CLK DIR+ connect DIR

Smart utičnica se jednostavno povezuje na bežični ruter Omogućava daljinsku kontrolu priključenih uređaja preko mobilnog telefona Uređaji se takođe mogu uključivati prema vremenskom rasporedu Kompatibilna sa Google Home i Amazon Alexa Odgovarajuća aplikacija je eWeLink Praćenje potrošnje preko aplikacije Wi-Fi protokol 2.4 GHz, 802.11 b/g/n Maksimalno opterećenje: 16 A / 3500 W Napajanje: 230 V~ / 50 Hz

SPAJDERVERZUM 1 Izdavač: ČAROBNA KNJIGA Beograd Godina izdanja : 2022 Pismo: latinica Povez: tvrdokoričeni Broj stranica: Dimenzije: 24,7 x 16,3 cm boja: pun kolor datum postavljanja aukcije: 28.07.2022. smeštaj: B-6/DJ TROŠKOVI SLANJA. preporučena tiskovina (175) + deo troškova pakovanja (5 dinara) = 180 dinara Opšte stanje : strip kockast čvrst, kompaktan bez podvlačenja bez pečata, povez odličan, Nedostaci: nova, nečitana strip knjiga, nema

Crne besmislice (Makondo i Forma B) - u boji , 48 stranica Ocena i opis očuvanosti: 5- Pise : Božidar Milojković (Bam) ; Lazar Odanović (Lazzzaro) crta : Dragan Lazarević (De Lazare) datum izdanja : 21.10.2018.god. tvrde korice, latinica, 222mm x 302mm x 10mm Biblioteka Karike i oblaci štampa: Dunav - Zemun ISBN 978-86-89161-62-5 prvo izdanje tiraž: 600 težina albuma 500 grama

Vremenski relej sa zakašnjenjem pri uključivanju! Nakon dobijanja upravljačkog napona kasni sa pomerajem svojih kontakata za unapred zadano vreme. - Artikal: rele vremenski (FULI), - Model / Tip: ST3P A-B, - Nazivni Napon: 200-220 V AC, - Nazivna Struja: 3 A, - Vremenski Interval: 1s/10s/60s/6min., - Broj Pinova: 8, - Način / Tip Montaže: na podnozje PF083, - Temperatura Okruženja (ºC): -40°C do + 60°C, - IP Zaštita: IP 20.

133. *Set od 5kom. vrhova za lemilicu odgovara za: 936.937,938.900M,933.907,951.898D,852D+,952D,913 itd. Modeli vrhova: I, B, D2,4,3C, KE50. Temperaturni opseg: 200° C-480° C **Robu šaljem kao preporuceno pismo u vazdusnoj koverti sa pracenjem, cime je postarina samo 200din. (na Vašu odgovornost) nakon uplate na moj racun ili Postexpressom kurirskom sluzbom (pouzecem) robu placate prilikom preuzimanja. Naravno moze i licno preuzimanje kome vise odgovara.

- Raspberry Pi USB ekspanzija sa 4 porta, - Kompatibilan za sledeće Raspberry Pi modele: 3, 2, B+, Zero, Zero W, - Radni napon: 5V, - Poseduje 4 USB porta kompatibilna sa USB 2.0 i 1.1 brzinom prenosa, - USB na UART za serijsko otklanjanje grešaka, - Višestruki indikatori za lak pristup napajanju, USB na UART i USB interfejs za proširenje, - Prečnik otvora za montažu: 3mm, - Dimenzije pločice: 65 x 30mm.

Izdavač Forma B | Golconda Godina izdavanja 2022 Bonelli serijal Nathan Never Scenario Antonio Serra | Bepi Vigna Crtež Dante Bastianoni | Roberto De Angelis Naslovna strana Claudio Castellini | Max Bertolini Originalni naslov Inferno / Fanteria dello Spazio / L’ultima battaglia Broj originalne edicije 10-12 Naslovi epizoda Pakao / Svemirska pešadija / Poslednja bitka Jezik Srpski Zemlja Italija Edicija Redovna serija Tip izdanja Bonelli integrali SC Format 148 x 210 mm Povez Meki povez Broj strana 298 Boja Crno-belo

Stanje:kao novo Izdavač:Forma B, Beograd 2020 Pismo : latinica korica:tvrda, 24,5x34cm Ovo se ne kupuje svaki dan. Stanje proverite na slikama! U svakom slučaju, pitajte preko poruka, tražite dodatne slike na mail, proverite dali vam odgovara stanje, i dajte ponudu.. Uštedite na poštarini i kupite što više knjiga! SRETNA Kupovina Kliknite na ovaj link ispod i pogledajte sve knjige što prodajem: http://www.kupindo.com/pretraga.php?Pretraga=knjiga&CeleReci=1&UNaslovu=0&Prodavac=palesztin&Grad=&CenaOd=&CenaDo=&submit=tra%C5%BEi ---- ZUM ---

Izdavač Forma B Godina izdavanja 2021 Bonelli serijal Morgan Lost Scenario Claudio Chiaverotti Crtež Ennio Bufi | Giovanni Talami | Max Bertolini Naslovna strana Fabrizio De Tommaso Originalni naslov I colori del male / Il Babau / Ritratto di famiglia in nero Broj originalne edicije 1-3 Naslovi epizoda Boje zla / Babau / Porodični portret u crnom Jezik Srpski Zemlja Italija Edicija Crne novele Tip izdanja Kiosk izdanje Format 145 x 205 mm Povez Meki povez Broj strana 200 Boja Crveno-crno-belo | Kolor

RIĐOBRADI 2 Epizode: 3. BEZIMENI KAPETAN 4. IZAZOV KRALJU 5. SIN RIĐOBRADOG Autor: Šarlije i Ibinon Izdavač: Čarobna Knjiga Beograd Godina izdanja : 2022 Pismo: latinica Povez: tvrdokoričeni Broj stranica: 160 Dimenzije: 30,6 x 21,5 cm boja: pun kolor datum postavljanja aukcije: 31.12.2022. smeštaj: polica stripovi B-6/DJ TROŠKOVI SLANJA. preporučena tiskovina (175) + deo troškova pakovanja (5 dinara) = 180 dinara Opšte stanje : strip kockast čvrst, kompaktan bez podvlačenja bez pečata, povez odličan, Nedostaci: nova, nečitana strip knjiga, nema nedosataka

Dot Led matriks modul 8x8 sa MAX7219 cetvorostruki. Modul dolazi kompletno sklopljen i sa kablicima. Product Description The MAX7219 are compact, serial input/output common-cathode display drivers that interface microprocessors (μPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs. Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8x8 static RAM that stores each digit.Only one external resistor is required to set the segment current for all LEDs. The MAX7219 is compatible with SPI™, QSPI™, and Microwire™, and has slew-ratelimited segment drivers to reduce EMI.A convenient 3-wire serial interface connects to all common μPs. Individual digits may be addressed and updated without rewriting the entire display. The MAX7219 also allow the user to select code-B decoding or no-decode for each digit.The devices include a 150μA low-power shutdown mode, analog and digital brightness control, a scanlimitregister that allows the user to display from 1 to 8 digits, and a test mode that forces all LEDs on. Features: A single module can drive a 8x8 dot matrix common cathode Module Working voltage: 5V Module size: 12.8 cm X3.2 cm X1.3 cm(L*W*H) With 64 fixing screw holes, Hole diameter 3mm Module with input and output interfaces, support for cascading multiple modules Wiring:for example 51 SCM VCC→5V GND→GND DIN→P2.2 CS →P2.1 CLK→P2.0