- Kućište za RaspberryPi 3 B i RaspberryPi 3 B+, - Materijal: Polikarbonat, - Boja: transparentno, - Dimenzije: 25.4 x 63.5 x 88.9mm.

- Kućište za RaspberryPi 3 B i RaspberryPi 3 B+, - Rupa za ventilator, - Materijal: ABS, - Boja: crna, - Dimenzije: 90 x 62 x 26mm, - Težina: 37g.

Nov

Tv Spoljašnjost kao na fotografijama, unutrašnjost u dobrom i urednom stanju! B.C. dnevni je američki strip koji je stvorio crtač Johnny Hart. Smješten u pretpovijesno doba, prikazuje skupinu pećinskih ljudi i antropomorfnih životinja iz različitih geoloških razdoblja. B.C. debitirao je u novinama 17. veljače 1958. i bio je među najdugovječnijim stripovima koje je njegov originalni tvorac još napisao i nacrtao kada je Hart umro za svojom crtaćom daskom u Ninevehu, New York, 7. travnja 2007.. Od njegove smrti, potomak treće generacije Mason Mastroianni producirao je strip, s B.C. sindicirao Creators Syndicate. Povijest objavljivanja B.C. isprva je odbijen od strane brojnih sindikata dok ga New York Herald Tribune Syndicate nije prihvatio, lansirajući strip 17. veljače 1958. Hartu je pružena pomoć s B.C. pisci gegova Jack Caprio i Dick Boland (koji su se kasnije pridružili Hartu i karikaturistu Brantu Parkeru na Čarobnjaku iz Ida). Kada se sindikat Herald Tribunea raspao 1966. zbog raspada njegovih matičnih novina, B.C. je preuzeo Publishers Syndicate. Taj je sindikat često mijenjao vlasnike i nazive — Publishers-Hall Syndicate, Field Newspaper Syndicate, News America Syndicate i konačno North America Syndicate — da bi na kraju postao dio King Featuresa. U tom trenutku, 1987., Hart je promijenio distributera u Creators Syndicate, postavši jedan od Creatorsovih prvih sindiciranih stripova. Nakon Hartove smrti 2007., traku su počeli producirati Hartovi unuci Mason Mastroianni (glavni scenarist i karikaturist) i Mick Mastroianni (pisac za B.C. i Hartovu drugu kreaciju, Čarobnjak iz Ida), te Hartova kći Perri (pismopisac i kolorist). (Braća Mastroianni također su izradila originalni strip, Dogs of C Kennel, 2009.) John Lewis Hart (18. veljače 1931. - 7. travnja 2007.) bio je američki crtač poznat kao tvorac stripova B.C. i Čarobnjak iz Ida. Brant Parker koproducirao je i ilustrirao The Wizard of Id. Hart je dobio nekoliko nagrada, uključujući švedsku Adamsonovu nagradu i pet od Nacionalnog društva karikaturista. U svojim kasnijim godinama bio je poznat (i ponekad kritiziran) po uključivanju kršćanskih tema i poruka u svoje stripove.[1] Chuck Colson je u kolumni Breakpoint nazvao Harta `najčitanijim kršćaninom našeg vremena`, u odnosu na C. S. Lewisa, Franka E. Perettija i Billyja Grahama.[2] Biografija Rođen u Endicottu u New Yorku, Hartov prvi objavljeni rad bio je u Stars and Stripesu dok je služio u Koreji kao uvršteni pripadnik Zračnih snaga Sjedinjenih Država. Vrativši se 1953., objavljivao je karikature u The Saturday Evening Postu, Collier`s Weeklyju i drugim časopisima. Njegovo zaposlenje prije karikature uključivalo je rad u restoranu s roštiljem i slikanje natpisa.[3] Hartov najveći uspjeh, B.C., nastao je 1957. i počeo se pojavljivati ​​u nacionalnim dnevnim novinama 17. veljače 1958. [4] Hart je također sukreirao i napisao strip The Wizard of Id, koji je nacrtao Brant Parker, a koji se distribuira od 9. studenog 1964. [4] Prema Hanna-Barbera animatoru Edu Benedictu, moćne animacijske kuće obratile su se Hartu 1960. godine i ponudile animirani film B.C. niz. Razgovori su propali jer je HB preuredio koncept u ono što je na kraju postalo The Flintstones.[potreban citat] Wikinews ima povezane vijesti: Johnny Hart iz `B.C.` slava prolazi Hart je umro od moždanog udara 7. travnja 2007. Prema riječima njegove supruge Bobby, radio je za crtaćim stolom u trenutku smrti.[5][6] Njegov sukreator Čarobnjaka iz Ida, Brant Parker, umro je samo osam dana kasnije, 15. travnja 2007. Vjerska uvjerenja Hart je odgojen u ležerno religioznoj obitelji i redovito je pohađao kršćansku nedjeljnu školu. Iako je njegovo formalno obrazovanje završilo sa srednjom školom, bio je fasciniran Biblijom od malih nogu.[7] Godine 1984. došlo je do značajnog pomaka u Hartovoj duhovnosti, pa su Hart i njegova žena Bobby počeli pohađati kongregaciju Prezbiterijanske crkve u Ninevehu, New York. Hart je svoje religiozno buđenje pripisao timu oca i sina izvođača koji su instalirali satelitsku antenu u njegovu domu.[7] Hartova sve dublja religiozna vjera, te nepokolebljivi teološki i politički konzervativizam koji ju je pratio, postali su izvor značajnih kontroverzi u kasnijim godinama njegova života. U intervjuu za The Washington Post iz 1999., na primjer, izjavio je da će `Židovi i muslimani koji ne prihvate Isusa gorjeti u paklu` i da je `homoseksualnost Sotonino djelo.` [8] U istom članku, Hart iznio mišljenje da se `bliži smak svijeta, možda do 2010. godine.` Lavlji udio kontroverzi, međutim, došao je iz Hartove sve veće tendencije da svoje vjerske i političke teme i ideale uključi u svoje stripove, posebice B.C. Neke su novine odbile tiskati stripove s otvoreno religioznim temama ili su ih, kao u slučaju Los Angeles Timesa, premjestile u vjerski dio novina.[9] Kontroverzni stripovi Dvije su trake posebno bile kontroverzne. B.C. strip za 15. travnja 2001., koji je bio Uskrs, prikazivao je židovsku menoru sa sedam svijeća koje su postupno gorjele dok su natpisi na traci prikazivali riječi Isusa Krista. Na kraju su se vanjski krakovi svijećnjaka odvojili, ostavljajući kršćanski križ, a na posljednjoj ploči prikazan je otvoren i prazan Kristov grob.[10] Kritičari, uključujući Ligu za borbu protiv klevete i Američki židovski odbor, tvrdili su da Hartov strip prikazuje zamjensku teologiju, odnosno koncepciju kršćanstva kao zamjene judaizma. Hart se ispričao `ako sam uvrijedio ijednog čitatelja`, ali je ipak mislio da bi strip mogao povećati `religioznu svijest` i tvrdio da je mislio da strip bude posveta objema religijama.[9][11][12] Još jedan B.C. traka, koja je bila prikazana 10. studenog 2003., prikazivala je pomoćnu zgradu s tradicionalnim polumjesecom, u koju je lik ušao s okomitom grafikom `SLAM`, samo da bi upitao: `Jesam li to samo ja ili smrdi ovdje?` Kritičari, uključujući Vijeće za američko-islamske odnose, tvrdili su da kombinacija okomite trake i `SLAM-a`, kao i polumjeseca na nebu i na vanjskoj kući, čini traku klevetom na islam. Hart je zanijekao da se radilo o bilo čemu osim šali u kući.

Naziv: Zlatna serija 20 - Zagor, Povratak Zimske zmije (Korica B) Stanje: Kao novo, jednom pročitano

1 Pierre-François David Beauchard The Rise of the High Evil L` Association, 2004. 51 strana, veliki format. Veoma lepo očuvan, kao nov. NA FRANCUSKOM JEZIKU.

Tv Spoljašnjost kao na fotografijama, unutrašnjost u dobrom i urednom stanju! B.C. dnevni je američki strip koji je stvorio crtač Johnny Hart. Smješten u pretpovijesno doba, prikazuje skupinu pećinskih ljudi i antropomorfnih životinja iz različitih geoloških razdoblja. B.C. debitirao je u novinama 17. veljače 1958. i bio je među najdugovječnijim stripovima koje je njegov originalni tvorac još napisao i nacrtao kada je Hart umro za svojom crtaćom daskom u Ninevehu, New York, 7. travnja 2007.. Od njegove smrti, potomak treće generacije Mason Mastroianni producirao je strip, s B.C. sindicirao Creators Syndicate. Povijest objavljivanja B.C. isprva je odbijen od strane brojnih sindikata dok ga New York Herald Tribune Syndicate nije prihvatio, lansirajući strip 17. veljače 1958. Hartu je pružena pomoć s B.C. pisci gegova Jack Caprio i Dick Boland (koji su se kasnije pridružili Hartu i karikaturistu Brantu Parkeru na Čarobnjaku iz Ida). Kada se sindikat Herald Tribunea raspao 1966. zbog raspada njegovih matičnih novina, B.C. je preuzeo Publishers Syndicate. Taj je sindikat često mijenjao vlasnike i nazive — Publishers-Hall Syndicate, Field Newspaper Syndicate, News America Syndicate i konačno North America Syndicate — da bi na kraju postao dio King Featuresa. U tom trenutku, 1987., Hart je promijenio distributera u Creators Syndicate, postavši jedan od Creatorsovih prvih sindiciranih stripova. Nakon Hartove smrti 2007., traku su počeli producirati Hartovi unuci Mason Mastroianni (glavni scenarist i karikaturist) i Mick Mastroianni (pisac za B.C. i Hartovu drugu kreaciju, Čarobnjak iz Ida), te Hartova kći Perri (pismopisac i kolorist). (Braća Mastroianni također su izradila originalni strip, Dogs of C Kennel, 2009.) John Lewis Hart (18. veljače 1931. - 7. travnja 2007.) bio je američki crtač poznat kao tvorac stripova B.C. i Čarobnjak iz Ida. Brant Parker koproducirao je i ilustrirao The Wizard of Id. Hart je dobio nekoliko nagrada, uključujući švedsku Adamsonovu nagradu i pet od Nacionalnog društva karikaturista. U svojim kasnijim godinama bio je poznat (i ponekad kritiziran) po uključivanju kršćanskih tema i poruka u svoje stripove.[1] Chuck Colson je u kolumni Breakpoint nazvao Harta `najčitanijim kršćaninom našeg vremena`, u odnosu na C. S. Lewisa, Franka E. Perettija i Billyja Grahama.[2] Biografija Rođen u Endicottu u New Yorku, Hartov prvi objavljeni rad bio je u Stars and Stripesu dok je služio u Koreji kao uvršteni pripadnik Zračnih snaga Sjedinjenih Država. Vrativši se 1953., objavljivao je karikature u The Saturday Evening Postu, Collier`s Weeklyju i drugim časopisima. Njegovo zaposlenje prije karikature uključivalo je rad u restoranu s roštiljem i slikanje natpisa.[3] Hartov najveći uspjeh, B.C., nastao je 1957. i počeo se pojavljivati ​​u nacionalnim dnevnim novinama 17. veljače 1958. [4] Hart je također sukreirao i napisao strip The Wizard of Id, koji je nacrtao Brant Parker, a koji se distribuira od 9. studenog 1964. [4] Prema Hanna-Barbera animatoru Edu Benedictu, moćne animacijske kuće obratile su se Hartu 1960. godine i ponudile animirani film B.C. niz. Razgovori su propali jer je HB preuredio koncept u ono što je na kraju postalo The Flintstones.[potreban citat] Wikinews ima povezane vijesti: Johnny Hart iz `B.C.` slava prolazi Hart je umro od moždanog udara 7. travnja 2007. Prema riječima njegove supruge Bobby, radio je za crtaćim stolom u trenutku smrti.[5][6] Njegov sukreator Čarobnjaka iz Ida, Brant Parker, umro je samo osam dana kasnije, 15. travnja 2007. Vjerska uvjerenja Hart je odgojen u ležerno religioznoj obitelji i redovito je pohađao kršćansku nedjeljnu školu. Iako je njegovo formalno obrazovanje završilo sa srednjom školom, bio je fasciniran Biblijom od malih nogu.[7] Godine 1984. došlo je do značajnog pomaka u Hartovoj duhovnosti, pa su Hart i njegova žena Bobby počeli pohađati kongregaciju Prezbiterijanske crkve u Ninevehu, New York. Hart je svoje religiozno buđenje pripisao timu oca i sina izvođača koji su instalirali satelitsku antenu u njegovu domu.[7] Hartova sve dublja religiozna vjera, te nepokolebljivi teološki i politički konzervativizam koji ju je pratio, postali su izvor značajnih kontroverzi u kasnijim godinama njegova života. U intervjuu za The Washington Post iz 1999., na primjer, izjavio je da će `Židovi i muslimani koji ne prihvate Isusa gorjeti u paklu` i da je `homoseksualnost Sotonino djelo.` [8] U istom članku, Hart iznio mišljenje da se `bliži smak svijeta, možda do 2010. godine.` Lavlji udio kontroverzi, međutim, došao je iz Hartove sve veće tendencije da svoje vjerske i političke teme i ideale uključi u svoje stripove, posebice B.C. Neke su novine odbile tiskati stripove s otvoreno religioznim temama ili su ih, kao u slučaju Los Angeles Timesa, premjestile u vjerski dio novina.[9] Kontroverzni stripovi Dvije su trake posebno bile kontroverzne. B.C. strip za 15. travnja 2001., koji je bio Uskrs, prikazivao je židovsku menoru sa sedam svijeća koje su postupno gorjele dok su natpisi na traci prikazivali riječi Isusa Krista. Na kraju su se vanjski krakovi svijećnjaka odvojili, ostavljajući kršćanski križ, a na posljednjoj ploči prikazan je otvoren i prazan Kristov grob.[10] Kritičari, uključujući Ligu za borbu protiv klevete i Američki židovski odbor, tvrdili su da Hartov strip prikazuje zamjensku teologiju, odnosno koncepciju kršćanstva kao zamjene judaizma. Hart se ispričao `ako sam uvrijedio ijednog čitatelja`, ali je ipak mislio da bi strip mogao povećati `religioznu svijest` i tvrdio da je mislio da strip bude posveta objema religijama.[9][11][12] Još jedan B.C. traka, koja je bila prikazana 10. studenog 2003., prikazivala je pomoćnu zgradu s tradicionalnim polumjesecom, u koju je lik ušao s okomitom grafikom `SLAM`, samo da bi upitao: `Jesam li to samo ja ili smrdi ovdje?` Kritičari, uključujući Vijeće za američko-islamske odnose, tvrdili su da kombinacija okomite trake i `SLAM-a`, kao i polumjeseca na nebu i na vanjskoj kući, čini traku klevetom na islam. Hart je zanijekao da se radilo o bilo čemu osim šali u kući.

Brendon Specijal 3 Alhemičareva tajna Format A4, tvrde korice, broj strana 160, crno-belo SLIKE

Ocuvanost kao na slikama. Neotpakovano. VAŽNO: Iznos uplacujete na racun Komercijalne Banke 205-9001011867900-47 na ime Nikolić Dejan. Robu saljem iskljucivo kako je naznaceno u nacinu slanja same aukcije. NE ŠALJEM POUZEĆEM!!! Sve sto vas interesuje u vezi artikla pitajte. Ocekujem od kupca da realizujemo transakciju predvidjeno pravilima na Limundu, u suprotnom sledi prijava administratoru i negativna ocena.

glanc c-b

5-c-b

5/5- c-b

A4,c-b tvrd povez

Obojeni program 9: Dilan Dog Izdavač: Veseli četvrtak Datum izdavanja: 18.08.2016. Naslovna strana: Arturo Lauria Scenario: Aka B. / Ausonia / Marco Galli Crtež: Aka B. / Ausonia / Marco Galli Naslov originala: Sir Bone – Abiti su misura / Grick Grick / Claustrophobia Broj originala: 16 Naslovi epizoda: Ser Boun – odela po meri / Gric gric / Klaustrofobija Format: A5 Povez: meki Boja: kolor Broj strana: 134 NOVO, u celofanu!!!

betmen c-b,glanc 170 strana

4+ A4,c-b stanko bešlić

A4,c-b domaći autori 5

5,c-b 220 strana tvrd povez

izlupani ćoškovi stripa A4,c-b tvrd povez

Tišina, Didije Komes, Komiko, Novi Sad, 2011, meki povez, c/b, 152 strane, A5, NOVO

NINDŽA integral 1 - Miodrag Ivanović Mikica Izdavač: FORMA B Beograd Godina izdanja: 2019. Povez: broš Broj strana: 168 Pismo: latinica Stanje: dobro

Izdavač: Forma B Naslovna strana: Miodrag Ivanović – Mikica Scenario: Branislav Peterman / Petar Aladžić / Svetozar Obradović Crtež: Miodrag Ivanović – Mikica / Predrag Ivanović – Peka Format: A4 Povez: meki Boja: crno-belo Broj strana: 168

P04 The multi-function relay control module is specially designed for users with many different needs. It adopts a microcontroller as the main control unit and presets 32 kinds of functions, and users can use corresponding specific functions according to actual needs. It can be applied to water pump control, motor control, lamp strip control, solenoid valve control, etc. 1. New upgrade, the module function is increased to 32 kinds, to meet more application needs. 2. The power supply anti-reverse function will not damage the module due to wrong power supply. 3. Timing accuracy to 0.01 seconds timing. 0.1 seconds (minimum) ~ 999 minutes (maximum) optional 4. Low power consumption power saving setting, you can turn off the display area. Product parameters: Product Name: Multi-function time delay relay Relay V number: DC5V/12V/24V optional Input voltage: 5V version: DC5V power supply; 12V version: DC12V power supply; 24V version: DC24V power supply Output load: within 30V DC, maximum 10A. Within 250V, maximum 5A. Trigger signal: 5V version (high level: 5V); 12V version (high level: 12V), 24V version (high level: 24V) The low level is 0V. Quiescent current: 20mA Working current: 60mA Working temperature: -25℃-85℃ Power-off memory: Yes Product weight: ≈26g, product size: 65* 34.3 * 17.5 (MM L*W*H) The manual measurement is for reference only, the actual size is subject to the actual product Product Features: Wiring port description: DC+ Input DC power supply positive DC- Input DC power supply negative IN+ signal input positive IN- signal input negative NO relay normally open interface, the relay is short-circuited with COM when it is engaged, and it is suspended when not engaged; COM relay common terminal interface NC relay normally closed terminal interface, when the relay is not pulled in, it is short-circuited with COM, and it is left floating when pulled in; Instructions for use: Working mode (32 kinds): P-11: In jog mode, there is signal pull-in and no signal disconnect. P-12: Self-locking mode, the state of the relay reverses once after each trigger. P-13: After triggering, the relay will pull in and disconnect after delaying A time; the trigger will be invalid during the delay. P-14: After triggering, the relay will pull in, and it will be disconnected after the delay of A time; the trigger will be re-timed during the delay. P-15: After triggering, the relay will pull in, and it will be disconnected after the delay time A; during the delay time, the accumulated timer will be triggered. P-16: After triggering, the relay will pull in and disconnect after delaying time A; during the delay, a reset will be triggered (relay disconnected). P-17: After triggering, the relay pulls in for the duration of the signal, the input signal disappears, and then disconnects after the delay of A time; during the delay time, the relay is triggered again to keep the pull in, and the timing stops until the last signal disappears, delay A time Then disconnect. P-18: The relay will pull in immediately after power-on, and it will be disconnected after a delay of A second; until the next power-on. P-21: Give the signal, the relay will pull in after the delay of A time. P-22: Give a continuous signal, after the time exceeds A, the relay will pull in; when the signal disappears, the relay will open. P-23: When the signal disappears for more than A time, the relay pulls in; when there is a signal, the relay disconnects. P-24: Give a continuous signal. After the time exceeds A, the relay will pull in; when the signal disappears for more than time A, the relay will open. P-25: Give a continuous signal, the relay pulls in after exceeding A time; give a continuous signal again, the relay turns off after exceeding A time P-26: Give a signal, the relay will disconnect after A time pull-in; after the signal disappears, the relay will stop after A second pull-in. P-27: There is a pulse signal (rising edge or falling edge), the relay is disconnected, there is no pulse signal, the relay pulls in after the delay of A time (continuous high level or continuous low level are considered as no pulse). P-28: After power on, the relay will pull in after the delay time A until power off. The P-31: After power-on, the relay pulls in time A and turns off time B, in an infinite loop; power off stops. P-32: There is a continuous signal, the relay pulls in A time, disconnects B time, infinite loop; the signal disappears, and the loop is terminated. P-33: Give a signal once, the relay pulls in A time, disconnects B time, infinite loop; give another signal to terminate the loop. P-34: After power-on, the relay pulls in after the delay time A, and disconnects after pulling in the time B. P-35: Give a signal, after the delay time A, the relay pulls in and pulls off after the time B pulls in. P-36: Continuous signal is given. After the time A is exceeded, the relay is switched on and disconnected after the time B is switched on; the signal disappears, the timing is cleared, and the relay is turned off. P-37: There is a signal, the relay will be automatically disconnected after the A time is closed, and the B time will be counted after the disconnection. The signal trigger is invalid during the A+B time. P-38: There is a signal, the relay will be automatically disconnected after the time of pull-in A, after the time B is counted after the disconnection, it will be automatically disconnected after the time of pull-in A again. The P-41: The signal does not act; the signal disappears and triggers; the relay absorbs and merges after a delay of A time to disconnect. P-42: The signal disappears. After the delay time A, the relay pulls in; after the delay time B, the relay disconnects. P-43: The signal disappears. After the disappearance exceeds the time A, the relay pulls in; after delaying the time B, the relay opens. P-44: After power-on, the relay pulls in time A and turns off time B; after the cycle C times, the relay turns off and stops. P-45: No action after power on; after the signal is given, the relay pulls in the A time and disconnects the B time; the relay is turned off and stopped after C cycles; when the signal is given, it is executed again. P-46: After the signal is given more than A times, the relay pulls in; keeps pulling in; the power stops. P-47: After the signal exceeds A times, the relay pulls in; when it pulls in for B time, it is disconnected. P-48: During the C time, after continuously giving the signal more than A times, the relay will disconnect and stop after B time. Description table of the position of the decimal point and the time unit it represents: x.xx Decimal point is in the hundreds place, time range 0.01~9.99 seconds xx.x decimal point is in the tenth place, time range 0.1~99.9 seconds xxx has no decimal point, time range is 1~999 seconds xxx. The decimal point is in single digits, the time range is 1~999 minutes Turn off the display: In the non-setting state, press the K4 key to turn off the display, then press it again to turn on. Description of working parameter setting: Hold down the K1 key without letting go, after 2 seconds the display shows P-xx, press K2 and K3 to change the working mode. After selecting the working mode, short press K1 to enter the A time setting, the screen displays Axxx, then press K2 and K3 to modify the A time parameters, K2 and K3 key short press plus or minus 1, long press to quickly add and subtract 10, Press the K4 key to set the position of the decimal point. After setting the A time, press the K1 key to set the B time, the screen displays bxxx, then press the K2 and K3 keys to modify the B time parameters, K2 and K3 keys short press plus or minus 1, long press to quickly add and subtract 10, Press the K4 key to set the position of the decimal point. After setting the B time, (if the mode has the C cycle number parameter), then press the K1 key to set the C cycle number, the screen displays Cxxx, then press the K2 and K3 keys to modify the C cycle number parameter, K2 and K3 keys Short press to increase and decrease by 1, long press to increase and decrease by 10. After setting, press the K1 key once to exit the setting state and save all parameters.

P04 The multi-function relay control module is specially designed for users with many different needs. It adopts a microcontroller as the main control unit and presets 32 kinds of functions, and users can use corresponding specific functions according to actual needs. It can be applied to water pump control, motor control, lamp strip control, solenoid valve control, etc. 1. New upgrade, the module function is increased to 32 kinds, to meet more application needs. 2. The power supply anti-reverse function will not damage the module due to wrong power supply. 3. Timing accuracy to 0.01 seconds timing. 0.1 seconds (minimum) ~ 999 minutes (maximum) optional 4. Low power consumption power saving setting, you can turn off the display area. Product parameters: Product Name: Multi-function time delay relay Relay V number: DC5V/12V/24V optional Input voltage: 5V version: DC5V power supply; 12V version: DC12V power supply; 24V version: DC24V power supply Output load: within 30V DC, maximum 10A. Within 250V, maximum 5A. Trigger signal: 5V version (high level: 5V); 12V version (high level: 12V), 24V version (high level: 24V) The low level is 0V. Quiescent current: 20mA Working current: 60mA Working temperature: -25℃-85℃ Power-off memory: Yes Product weight: ≈26g, product size: 65* 34.3 * 17.5 (MM L*W*H) The manual measurement is for reference only, the actual size is subject to the actual product Product Features: Wiring port description: DC+ Input DC power supply positive DC- Input DC power supply negative IN+ signal input positive IN- signal input negative NO relay normally open interface, the relay is short-circuited with COM when it is engaged, and it is suspended when not engaged; COM relay common terminal interface NC relay normally closed terminal interface, when the relay is not pulled in, it is short-circuited with COM, and it is left floating when pulled in; Instructions for use: Working mode (32 kinds): P-11: In jog mode, there is signal pull-in and no signal disconnect. P-12: Self-locking mode, the state of the relay reverses once after each trigger. P-13: After triggering, the relay will pull in and disconnect after delaying A time; the trigger will be invalid during the delay. P-14: After triggering, the relay will pull in, and it will be disconnected after the delay of A time; the trigger will be re-timed during the delay. P-15: After triggering, the relay will pull in, and it will be disconnected after the delay time A; during the delay time, the accumulated timer will be triggered. P-16: After triggering, the relay will pull in and disconnect after delaying time A; during the delay, a reset will be triggered (relay disconnected). P-17: After triggering, the relay pulls in for the duration of the signal, the input signal disappears, and then disconnects after the delay of A time; during the delay time, the relay is triggered again to keep the pull in, and the timing stops until the last signal disappears, delay A time Then disconnect. P-18: The relay will pull in immediately after power-on, and it will be disconnected after a delay of A second; until the next power-on. P-21: Give the signal, the relay will pull in after the delay of A time. P-22: Give a continuous signal, after the time exceeds A, the relay will pull in; when the signal disappears, the relay will open. P-23: When the signal disappears for more than A time, the relay pulls in; when there is a signal, the relay disconnects. P-24: Give a continuous signal. After the time exceeds A, the relay will pull in; when the signal disappears for more than time A, the relay will open. P-25: Give a continuous signal, the relay pulls in after exceeding A time; give a continuous signal again, the relay turns off after exceeding A time P-26: Give a signal, the relay will disconnect after A time pull-in; after the signal disappears, the relay will stop after A second pull-in. P-27: There is a pulse signal (rising edge or falling edge), the relay is disconnected, there is no pulse signal, the relay pulls in after the delay of A time (continuous high level or continuous low level are considered as no pulse). P-28: After power on, the relay will pull in after the delay time A until power off. The P-31: After power-on, the relay pulls in time A and turns off time B, in an infinite loop; power off stops. P-32: There is a continuous signal, the relay pulls in A time, disconnects B time, infinite loop; the signal disappears, and the loop is terminated. P-33: Give a signal once, the relay pulls in A time, disconnects B time, infinite loop; give another signal to terminate the loop. P-34: After power-on, the relay pulls in after the delay time A, and disconnects after pulling in the time B. P-35: Give a signal, after the delay time A, the relay pulls in and pulls off after the time B pulls in. P-36: Continuous signal is given. After the time A is exceeded, the relay is switched on and disconnected after the time B is switched on; the signal disappears, the timing is cleared, and the relay is turned off. P-37: There is a signal, the relay will be automatically disconnected after the A time is closed, and the B time will be counted after the disconnection. The signal trigger is invalid during the A+B time. P-38: There is a signal, the relay will be automatically disconnected after the time of pull-in A, after the time B is counted after the disconnection, it will be automatically disconnected after the time of pull-in A again. The P-41: The signal does not act; the signal disappears and triggers; the relay absorbs and merges after a delay of A time to disconnect. P-42: The signal disappears. After the delay time A, the relay pulls in; after the delay time B, the relay disconnects. P-43: The signal disappears. After the disappearance exceeds the time A, the relay pulls in; after delaying the time B, the relay opens. P-44: After power-on, the relay pulls in time A and turns off time B; after the cycle C times, the relay turns off and stops. P-45: No action after power on; after the signal is given, the relay pulls in the A time and disconnects the B time; the relay is turned off and stopped after C cycles; when the signal is given, it is executed again. P-46: After the signal is given more than A times, the relay pulls in; keeps pulling in; the power stops. P-47: After the signal exceeds A times, the relay pulls in; when it pulls in for B time, it is disconnected. P-48: During the C time, after continuously giving the signal more than A times, the relay will disconnect and stop after B time. Description table of the position of the decimal point and the time unit it represents: x.xx Decimal point is in the hundreds place, time range 0.01~9.99 seconds xx.x decimal point is in the tenth place, time range 0.1~99.9 seconds xxx has no decimal point, time range is 1~999 seconds xxx. The decimal point is in single digits, the time range is 1~999 minutes Turn off the display: In the non-setting state, press the K4 key to turn off the display, then press it again to turn on. Description of working parameter setting: Hold down the K1 key without letting go, after 2 seconds the display shows P-xx, press K2 and K3 to change the working mode. After selecting the working mode, short press K1 to enter the A time setting, the screen displays Axxx, then press K2 and K3 to modify the A time parameters, K2 and K3 key short press plus or minus 1, long press to quickly add and subtract 10, Press the K4 key to set the position of the decimal point. After setting the A time, press the K1 key to set the B time, the screen displays bxxx, then press the K2 and K3 keys to modify the B time parameters, K2 and K3 keys short press plus or minus 1, long press to quickly add and subtract 10, Press the K4 key to set the position of the decimal point. After setting the B time, (if the mode has the C cycle number parameter), then press the K1 key to set the C cycle number, the screen displays Cxxx, then press the K2 and K3 keys to modify the C cycle number parameter, K2 and K3 keys Short press to increase and decrease by 1, long press to increase and decrease by 10. After setting, press the K1 key once to exit the setting state and save all parameters.

Vremenski relej sa zakašnjenjem pri uključivanju! Nakon dobijanja upravljačkog napona kasni sa pomerajem svojih kontakata za unapred zadano vreme. - Artikal: rele vremenski (FULI), - Model / Tip: ST3P A-B, - Nazivni Napon: 200-220 V AC, - Nazivna Struja: 3 A, - Vremenski Interval: 1s/10s/60s/6min., - Broj Pinova: 8, - Način / Tip Montaže: na podnozje PF083, - Temperatura Okruženja (ºC): -40°C do + 60°C, - IP Zaštita: IP 20.