Prodajem značku u obliku pisanog latiničnog slova B crvene boje, visine 2,5 cm.

Prodajem značku u obliku pisanog latiničnog slova B crvene boje, visine 2,5 cm. Preuzimanje je na Banovom brdu.

ŠIFRA: 1536 - Adapter pločica sa ženskim USB konektorom tip `B`, - Idelan za projekte sa `Arduino` i drugim razvojnim sistemima gde se zahteva povezivanje sa USB konektorom, - Omogućava jednostavno povezivanje putem kontaktne letvice.

Tip : Vezica Boja : Crna Dužina : 150 mm Širina : 3.5 mm Pakovanje : 50 kom. Ostale napomene : - ---------------- Kablovske vezice crne boje Otporne na vremenske uslove, odlične za spoljnu upotrebu

- Adapter USB 3.1 Type C utičnica - USB Type B micro utikač, - Materijal izrade adaptera: plastika, metal, - Dužina: 23mm, - Boja: crna.

- Kabl USB2.0 A M-USB B mikro 0.3m plavi, - Za `Arduino` razvojne ploče, - Dužina kabla: 0.3m.

- Kabl USB2.0 A M-USB2.0 B M 0.3m plavi, - Za `Arduino` razvojne ploče, - Dužina kabla: 0.3m.

- Adapter USB 3.1 CM - USB BF micro, - Boja: crna.

P17 Product parameters: 1. Working voltage: DC 2.8-6V (for 3V 3.3V 3.7V 4.5V 5V 6V LED driver) 2. Output current: 30-1500MA 3. Maximum output power: 9W Can drive 1-16 2.8-6V leds (Maximum current does not exceed 1.5A) 4. Current regulation: 1 through adjustable resistance; 2 Control chip temperature regulation through PWM signal Over LED current protection Operating temperature range Application 1: Wiring in accordance with the following figure, use a suitable screwdriver gently and slowly rotate the adjustable resistance. Application 2: Adjust the adjustable resistance to 0 ohms (or maximize the current according to Application 1) and then use the MCU output PWM signal to control the LED output current the frequency of the PWM signal should be less than 2KHz Product Description: LD06AJSA/B is a current regulation integrated circuit operating from an input voltage of 2.8V to 6V, the constant output current can be set up to 1.5A with an external resistor. The LD06AJSA/B consists of high precision reference voltage, amplifier, current mirror, etc. The on-chip power transistor and current sense block greatly reduce the external component count, which makes the LD06AJSA/B ideal for LED driver. When the CE pin is high, the input voltage is greater than 2.8V, and is larger than the LED forward voltage plus the required voltage drop, LD06AJSA/B functions normally to deliver constant current from the LED pin. The LD06AJSA/B adopts the temperature regulation instead of temperature protection function, the temperature regulation can make the LED being turned on continuously in case of high ambient temperature or high voltage drop. When the LD06AJSA/B junction temperature reaches about 135 ° C, the internal temperature regulation block reduces the LED current so that the junction temperature will not rise any more. This feature allows the users to maximize the use of the power handling capability of the chip, do not worry about the chip overheating and damage to the chip or external components. The LD06AJSA/B also has the chip enable function, which can shutdown the whole chip to limit the current consumption within 1uA. The LD06AJSA/B also adopts the over current protection block. When LED current approaches 1.9A(Typical), the over current protection block begins to function to prevent the LED current from increasing further.

- Materijal: PVC, - Sa UNC4-40 pričvrsnim šrafovima, - Dimenzije: (A)69.3 x (B)63.5 x (C)50.9 x (D)57.8 x (E)23.0mm.

- Materijal: PVC, - Tip: ugaoni, - Dimenzije: (A)67.1 x (B)61.1 x (C)38.1 x (D)15.5 x (E)17.0 x (G)18.6 x (H)11.9mm.

NOVE SRD DIODE 100 GHz https://www.ebay.com/itm/4-pcs-2D524-KD524-B-Russian-Military-Microwave-Step-Recovery-Diode-100GHz-USSR/193341896678?hash=item2d041337e6:g:29YAAOSwtfhYsFZk

- Broj provodnika: 20, - Raspon između pinova: 2.54mm, - Maksimalna snaga: 1000VAC, - Maksimalna jačina struje: 1A, - Tip: ugaoni, - Dimenzije: (A)32.26 x (B)22.86mm, - Radna temperatura: od -25 do +85°C, - Boja: crna.

- Broj provodnika: 40, - Raspon između pinova: 2.54mm, - Maksimalna snaga: 500VAC, - Maksimalna jačina struje: 1A, - Tip: uspravan, - Dimenzije: (A)58,46 x (B)48.26mm, - Radna temperatura: od -55 do +105°C, - Boja: crna.

- Broj provodnika: 26, - Raspon između pinova: 2.54mm, - Maksimalna snaga: 1000VAC, - Maksimalna jačina struje: 1A, - Tip: ugaoni, - Dimenzije: (A)39.88 x (B)30.48mm, - Radna temperatura: od -25 do +85°C, - Boja: crna.

- Broj provodnika:40, - Raspon između pinova: 2.54mm, - Maksimalna snaga: 1000VAC, - Maksimalna jačina struje: 1A, - Tip: ugaoni, - Dimenzije: (A)58,42 x (B)48,26mm, - Radna temperatura: od -25 do +85°C, - Boja: crna.

- Broj provodnika: 34, - Raspon između pinova: 2.54mm, - Maksimalna snaga: 1000VAC, - Maksimalna jačina struje: 1A, - Tip: ugaoni, - Dimenzije: (A)50.04 x (B)40.64mm, - Radna temperatura: od -25 do +85°C, - Boja: crna.

- Broj provodnika: 34, - Raspon između pinova: 2.54mm, - Maksimalna snaga: 500VAC, - Maksimalna jačina struje: 1A, - Tip: uspravan, - Dimenzije: (A)50.84 x (B)40.64mm, - Radna temperatura: od -55 do +105°C, - Boja: crna.

Drajver step motora sa ULN2003 chipom. Odredjeni ulaz direktno ukljucuje isti izlaz. A, B, C, D Led diode signaliziraju koji je izlaz aktivan. Dimenzije: :2.8cm x 2.8cm x 2cm Napajanje: 5-12V DC

- 37-polna D-Sub utičnica, - Način montaže: PCB-ugaona, - Pozlaćeni kontakti, - Maksimalni radni napon: 125VDC, - Maksimalna jačina struje: 5A, - Radna temperatura: od -55 do +125°C, - Dimenzije: (A)69.70 x (B)54.96 x (C)63.50mm.

- DP9 utikač za flat kabl, - Kontakti: 9, - Materijal kontakata: fosfor-bronza, - Maksimalni radni napon: 125VDC, - Maksimalna jačina struje: 1A, - Radna temperatura: -25 do +85°C, - Dimenzije: (A)30.8mm, (B)24.99mm, (C)16.92mm, (D)16.1mm, (E)18.6mm.

- DP9 utičnica za flat kabl, - Kontakti: 9, - Materijal kontakata: fosfor-bronza, - Maksimalni radni napon: 125VDC, - Maksimalna jačina struje: 5A, - Radna temperatura: -25 do +85°C, - Dimenzije: (A)30.8mm, (B)24.99mm, (C)16.33mm, (D)16.1mm, (E)18.6mm.