General Specifications Power rating1 20Wrms Nominal impedance 8Ω Frequency range 2000-20,000Hz Sensitivity2 104dB Recommended min. crossover (12dB/oct) 2500Hz Voice coil diameter 35mm/1.4in Voice coil material Copper clad aluminium Magnet type Neodymium Diaphragm material Aluminium Surround material Elastomer Mounting Information Overall width 90mm/3.5in Overall depth 57mm/2.2in Fitting Flange (2 x M6 holes on 76mm, 3.0in PCD) Throat exit 25.4mm/1in Unit weight 0.25kg/0.6lb Packed Dimensions & Weight Single pack size W x D x H 90mm x 90mm x 60mm /3.5in x 3.5in x 2.4in Single pack weight 0.5kg/1.1lb Multi pack (24) size W x D x H 250mm x 350mm x 290mm /9.8in x 13.8in x 11.4in Tested for two hours on plane wave tube using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Measured on axis at 1W, 1m, using typical horn, in 2π anechoic environment

The HD2000 1.4 inch exit high frequency compression driver has been designed for use in high quality audio systems. The titanium diaphragm is produced in-house and has been developed to assure unmatched transient response. A proprietary treated Nomex former with edge-wound copper-clad aluminum wire (CCAW) 60mm voice coil completes diaphragm assembly. It has been made by joining the proprietary-treated Nomex former directly to the titanium dome through its upper bend edge. In comparison with a usualstraight former joint, the driver design assures extended frequency energy transfer for improved response linearity and unparalleled reliability. This feature maintains proper motion control of the dome in real working conditions. Due to its physical properties, the proprietary-treated Nomex former shows a 30% higher value of tensile elongation at working operative temperatures (200°C) when compared to Kapton. Moreover, thismaterial issuitable to work also in highermoisture-content environments. Equipped with Proprietary Phase Plug 3P architecture, the HD2000 has been designed to give a smooth coherent wave front at the horn entrance in all working frequency ranges with a high level manufacturing consistency. The phase plug with its short openings and high flare rate, assureslow distortion with excellent mid-high frequency reproduction. The HD2000 powerful ceramic magnet assembly has been designed to obtain 16 kGauss in the gap within a compact ferrite motor structure. The motor structure is equipped with copper ring on the pole piece, reducinginductance effect and distortion. General Product type : Compression driver Brand : Eighteen Sound Manufacturer reference : HD2000 Product code : DRV142000TI08FA - 0421T8H200 Informations Nominal impedance : 8 ohm Dimensional category : 6 inch Manufacturer sensitivity : 108 dB Nominal power handling : 70 W Max power handling : 140 W Bandwidth : 1000÷20000 Hz Recommended min cutoff frequency : 1000 Hz Exit diameter compression driver : 1.4 inch Datas Flux density : 1.6 T Zmin : 7.6 ohm Weight : ~2.8 kg Dimensions Voice coil diameter : 2.4 inch Outside diameter : 145 mm Depth : 65 mm Shape & Materials Front chape : Cylindrical Magnet type : Ferrite

Power Rating (AES, W rms) 75 Nominal impedance (?) 8 Frequency range (Hz) 1200-20000 Sensitivity (dB) 110 Minimum crossover (Hz) 2200* Voice coil diameter (mm/in) 44.5/1.75 Diaphragm material PETP film Magnet material Ceramic Mounting Information Width (mm/in) 120/4.7 Depth (mm/in) 56/2.2 Weight (kg/lb) 2.3/5.1 Fitting Flange (2/3 M6 holes on 76/57mm, 3.0/2.24in PCD) Throat exit / diameter (mm/in) 25.4/1 Packed Dimensions and Weight Single pack size W x D x H (mm/in) 140 x 170 x 70/5.5 x 6.7 x 2.8 Single pack weight (kg/lb) 3/6.6 Multipack (6) size W x D x H (mm/in) 430 x 370 x 90/16.9 x 14.6 x 3.5 Multipack (6) weight (kg/lb) 14/31 * A lower frequency can be used at the manufacturer's discretion

JB Systems HT30 Bullet Tweeter Technical Information * Titanium Diaphragm + 1" Kapton voice coil * Impedance: 8 Ohm * Freq. Response: 4 kHz - 20 kHz * Sensitivity: 98 dB * Dimensions: 80x80x63 * Hole cutout: diameter 70mm * Weight: 0.68 kg

Celestion CDX1-1445 Ferrite 1" Compression Driver 20W Celestion's compact and versatile CDX1-1445 1" high frequency driver is the result of the company's extensive experience, and its commitment to rigorous technical analysis. The driver's advanced non-metallic PETP diaphragm provides accurate, non-fatiguing response, while offering a higher level of durability than shatter-prone metallic domes. Celestion's new drivers are in great demand by popular loudspeaker system manufacturers, and after a single listen to the CDX-1445 it will be easy to understand why! Specifications: • Power handling: 20 watts RMS (AES standard) • Recommended min. crossover: 2,200 kHz, 12 dB/octave • VCdia: 1.4" • Impedance: 8 ohms • Frequency range: 1,500-20,000 Hz • Sensitivity: 106 dB 1W/1m • Mounting (flange): 4 x M6 holes on 3" PCD • Dimensions: 3.54" dia. x 1.83" depth • Net weight: 2.2 lbs. Overview The ultra-compact CDX1-1445 1" HF driver features great durability and excellent sound quality, thanks to Celestion's use of serious research and the implementation of advanced component materials. Highlights 1" exit lightweight and compact ferrite magnet compression driver with 1.4" copper clad aluminum voice coil 20 watts power handling and 106 dB sensitivity One-piece PETP diaphragm and surround for smooth, extended response Finite Element Analysis (FEA) techniques used to optimize both magnetic and acoustic design Suitable for 2-way and 3-way systems

Key features 110 dB 1W / 1m average sensitivity 140 W program power handling 1,4 inches exit throat 64mm (2,4 in) edgewound aluminum voice coil True Piston Motion TiN coated titanium diaphragm Proprietary phase plug design High grade neodymium magnetic structure Excellent thermal exchange Downloads Data sheet Drawing Description The NSD1424BTN 1.4” exit neodymium high frequency compression driver has been designed for high level sound systems application. This new HF unit uses our proprietary True Piston Motion - TPM - technology, based on a thin film nitride coating deposit over the titanium diaphragm. The thin film is just several micron thick and is realized in a PVD - Physical Vapour Deposition - vacuum chamber. With its very high value of elasticity modulus (six times higher than titanium and two times higher than beryllium), the Tin coated Titanium diaphragm is capable of doubling the diaphragm overall stiffness with obvious benefits in terms of impulse response and intermodulation distortion reduction. The frequency response is then extended by 25%, showing a predictable, ideal pistonic behaviour, avoiding top-end spurious resonances. A proprietary treated Nomex bended former edge-wound aluminum 60mm voice coil completes diaphragm assembly. It has been made joining the proprietary treated Nomex former directly to the titanium dome through its upper bend edge. In comparison with usual straight former joint, the driver design assures extended frequency energy transfer for improved response linearity and unparallel reliability. This feature allows to keep proper motion control of the dome in real working conditions. Thanks to its physical properties, the proprietary treated Nomex former shows 30% higher value of tensile elongation at working operative temperature (200°C) when compared to Kapton. Moreover, this material is suitable to work also in higher moisture contents environments. Equipped with Proprietary Phase Plug 3P architecture, the NSD1424BTN has been designed to give smooth coherent wavefront in the horn entrance in all working frequency range and high level manufacturing consistency. The phase plug with its short openings and high flare rate value assures low distortion and remarkable improvements in mid-high frequency reproduction. Through careful use of elementary pieces of neodymium magnets, Eighteen Sound engineers have developed a powerful neodymium magnet assembly able to reach 19K Gauss in the gap in compact and lightweight structure. The motor structure, throughout the precisely coherent phase plug with 3 circumferential slots and copper ring on the pole piece, reduces inductance effects and distortion. The custom designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading. Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover that allows to obtain a lower power compression value. GENERAL SPECIFICATIONS Throat Diameter 35,5 mm (1,4 in) Rated Impedance 8 ohm DC Resistance 6 ohm Minimum Impedance 8 ohm at 3000 Hz AES power (1) 70 W above 1,2 kHz Program power (2) 140 W above 1,2 kHz Sensitivity (1W@1m) (3) 110 dB Frequency Range 800 Hz ÷ 20 kHz Recomm. Xover Frequency above 1200 Hz (12 dB/octave) Diaphragm Material TiN coated Titanium Voice Coil Diameter 60 mm (2,4 in) Voice Coil Winding Material Edge-wound aluminum Magnet Material Neodymium Flux Density 1,9 T BL Factor 10,5 N/A Polarity Positive voltage on red terminal gives positive pressure in the throat MOUNTING INFORMATIONS Overall diameter 116,6 mm (4,59 in) Mounting holes diameter 4 M6 holes 90° at Ø102 mm (4 in) Bolt circle diameter 102mm (4 in) Total depth 54,5 mm (2,15 in) Net weight 1,7 Kg (3,70 lb) Shipping weight 1,9 Kg (4,20 lb) CardBoard Packaging dimensions 132x132x68 mm (5,2x5,2x2,7 in)

Throat Diameter: 25 mm (1.0 in) Nominal Impedance: 8 Ω Minimum Impedance: 7.0 Ω Nominal Power Handling2: 20 W Continuous Power Handling3: 40 W Sensitivity4: 109.0 dB Frequency Range: 2.0 - 20.0 kHz Recommended Crossover5: 2.5 kHz Voice Coil Diameter: 25 mm (1.0 in) Winding Material: Copper Diaphragm Material: Cloth Magnet Material: Ferrite

12Wrms (AES standard) power handling and 106dB sensitivity, 1500Hz – 20kHz frequency range Single piece PETP film diaphragm and surround Finite element analysis (FEA) used to optimise magnetic, acoustic and electromechanical design Ideal for two-way sound reinforcement cabinets General Specifications Power rating1 12Wrms Continuous power rating2 24W Nominal impedance 8Ω Frequency range 1500-20,000Hz Sensitivity3 106dB Recommended min. crossover (12dB/oct) 2200Hz Voice coil diameter 25mm/1in Voice coil material Copper clad aluminium Magnet type Ferrite Diaphragm material PETP film Surround material PETP film Mounting Information Width 70mm/2.8in Depth 50mm/2in Weight 0.7kg/1.5lb Fitting Flange (2xM6 holes on 76mm/3in PCD) Throat exit 2.5mm/1in

40Wrms power handling (AES standard) and 110dB sensitivity Sound Castle™ clamping ensures even pressure on diaphragm assembly for reduced distortion One piece PETP diaphragm and surround Finite Element Analysis (FEA) used to optimise both magnet assembly and acoustic design General Specifications Power rating1 40Wrms Continuous power rating2 80W Nominal impedance 8Ω Frequency range 1200-20,000Hz Sensitivity3 110dB Recommended min. crossover (12dB/oct) 2200Hz Voice coil diameter 44mm/1.75in Voice coil material Edgewound copper clad aluminium Magnet type Ferrite Diaphragm material PETP film Surround material PETP film Mounting Information Width 120mm/4.7in Depth 56mm/2.2in Weight 2.3kg/5.1lb Fitting Screw (35mm, 1.38in dia) Throat exit 25.4mm/1in Packed Dimensions & Weight Single pack size W x D x H 140mm x 170mm x 70mm /5.5in x 6.7in x 2.8in Single pack weight 3kg/6.6lb Multi pack size W x D x H 430mm x 370mm x 90mm /16.9in x 14.6in x 3.5in Multi pack weight 14kg/31lb

GENERAL SPECIFICATIONS Throat Diameter 35,5 mm (1,4 in) Horizontal Coverage (-6dB) 100° nominal Vertical Coverage (-6 dB) 10° nominal Usable Frequency Range Above 800 Hz Sensitivity (on axis) 111 dB Frequency Range 500 Hz ÷ 18KHz Material Die-cast aluminum MOUNTING INFORMATIONS Flange Height 126 mm (5 in) Mouth Width 133 mm (5.25 in) Depth 215 mm (8.45 in) Flange Mounting 4 screws ø 6 Net weight 1 kg (2.10 lb) Gross weight 1,3 Kg (2.73 lb)

PSD 51T Compression driver 8 Ohm, 60W / 120W Power Rating 60W (Specification, 1.6kHz 18dB) Nominal Impedance* 8 Ohm Throat Size 1\", 25.4mm Usable Frequency Range 1.2kHz - 20kHz Recommended Crossover 1.2kHz/18dB or 1.8kHz/12dB Sensitivity (1W 1m on axis horn) 105dB Resonance 550Hz Voice Coil Diameter 2", 51mm Re 6.1 Le 1.6 mH

Specifications 15W Nominal Power Rating 107dB Sensitivity 25mm/1.0in Voice coil diameter Nominal Power Rating 15W Continuous Power Rating 30W Sensitivity 107dB Rated Impedance 8Ω Frequency Range 1500-20,000Hz Voice coil diameter (mm) 25mm Voice coil diameter (in) 1.0in Recommended min. crossover (12dB/oct) 2200Hz Magnet Type Ferrite Voice coil material Copper clad aluminium Diaphragm Material PETP film Surround Material PETP film Width (mm) 90mm Width (in) 3.5in Depth (mm) 52.8mm Depth (in) 2.1in Fitting Screw (35mm/1.38in diameter) Throat Exit (mm) 25mm Throat Exit (in) 1.0in Horn 1 (Part Number) T5951 Horn 1 (Description) H1SC-9050 Horn 2 (Part Number) T5952 Horn 2 (Description) H1SC-7050 Mounting Information Unit Weight 0.8kg/1.8lb Width 90mm/3.5in Depth 52.8mm/2.1in Weight 0.8kg/1.8lb Fitting Screw (35mm/1.38in diameter) Throat Exit 25mm/1.0in Packed Dimensions & Weight Single pack size W x D x H 113mm x 103mm x 72mm/4.4in x 4.0in x 2.8in Single pack weight 1.1kg/2.4lb Multi Pack Qty 16 Multi pack size W x D x H 480mm x 480mm x 75mm/18.9in x 18.9in x 2.95in Multi pack weight 15kg/33lb

This design maintains the minimum resonance frequency point value at 1600Hz, extending the frequency response in the mid region when compared to previous compression driver model, the XD120. The design of diaphragm and surround in polyester material allows better control in terms of movement and mechanical stress. Radial ribs increase stiffness avoiding uncontrolled vibration modes in the usable frequency range. An edge-wound aluminum voice coil, wounded on proprietary treated Nomex, completes diaphragm assembly. Proprietary treated Nomex former, thanks to its physical properties, shows 30% higher value of tensile elongation at working operative temperature(200°C) when compared to Kapton. This plus is capable to keep properly energy transfer control to the dome in real working conditions. Moreover, Eighteen Sound voice coil proprietary Nomex former is suitable to work also in environments with higher moisture contents. The polypropylene phase plug is the result of a meticulous design exercise. Its shape assures the correct acoustic impedance of the radiating dome, reducing distortion levels across a very wide range of frequency. Final result is a smooth coherent wavefront in the horn entrance, high thermal stability and manufacturing consistency. The compact and lightweight ceramic magnet assembly has been designed to obtain 16KGauss in the gap. The XD125 pressure die-cast polyurethane foam horn maintains constant nominal 90° Horizontal x 60° Vertical pattern control, providing consistent on-axis and off-axis frequency response from 2kHz to 16kHz in the horizontal plane and from 2,5kHz to 16 kHz in the vertical plane. Horn directivity is constant from 2,5kHz. Computer Aided Finite Element Analysis and extensive testing were used to obtain the horn contours. Horn is designed to be free of resonance and vibrations assuring maximum strength. 1 inch exit throat 108 dB SPL 1W/1m average sensitivity 25,4 mm (1 in) edgewound aluminum voice coil 50 Watt program power handling Low weight, easy mounting and handling structure Usable in two way or multiway systems 90° x 60° coverage Constant directivity pattern Unique Eighteen Sound elliptical shape General Product type Horn+driver Brand Eighteen Sound Reference XD125 Product code DRV10D125PO08FD - 0421M8X110 Informations Nominal impedance 8 ohm Manufacturer sensitivity 109 dB Nominal power handling 25 W Max power handling 50 W Bandwidth 2000÷18000 Hz Recommended min cutoff frequency 2500 Hz Exit dimension 1.0 inch Datas Flux density 1.65 T Zmin 8 ohm Weight ~1.1 kg Dimensions Voice coil diameter 1 inch Shape & Materials Front chape Cylindrical Magnet type Ferrite

A further innovation in the NSD1095N is the titanium diaphragm nitrogen treatment, a proprietary technology defined as True Piston Motion - TPM technology developed after extensive research by Eighteen Sound. The coating is realized in a PVD - Physical Vapor Deposition - vacuum chamber. With its very high value of elasticity modulus (six times higher than titanium and two times higher than beryllium), the nitride thin film is capable of doubling the diaphragm overall stiffness with obvious benefits in terms of impulse response and intermodulation distortion reduction. The frequency response is then extended by 25%, showing a predictable, ideal pistonic behavior, avoiding top-end spurious resonances. An edge-wound copper-clad aluminum voice coil, wound on proprietary treated Nomex, completes the diaphragm assembly. Nomex shows a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. Moreover, this proprietary former material is also suitable for use in high moisture content environments. The powerful neodymium magnet assembly has been designed to obtain 20KGauss in the gap giving major benefits in transient response. A copper ring on the pole piece reduces inductance above 10 kHz, improving phase and impedance linearization. The custom designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading. Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover which leads to a lower power compression value. A special treatment has been applied to the magnet and the top and back plates of the magnetic structure making the driver more resistant to the corrosive effects of salts and oxidization. General Product type Compression driver Brand Eighteen Sound Reference NSD1095N Product code DRV101095TI08NA - 0421T8N410 Informations Nominal impedance 8 ohm Dimensional category 3.5 inch Manufacturer sensitivity 110 dB Nominal power handling 50 W Max power handling 100 W Bandwidth 1600÷20000 Hz Recommended min cutoff frequency 1600 Hz Datas Flux density 2 T Zmin 7 ohm Weight ~1.1 kg Dimensions Voice coil diameter 1.75 inch Outside diameter 93 mm Depth 53 mm Shape & Materials Front chape Cylindrical Magnet type Neodymium

HD1050 HF Compression Driver Key features 107 dB SPL 1W / 1m average sensitivity 1 inch exit throat 44 mm (1 3/4 inch) voice coil diameter 100 Watt program power handling Titanium dome over PEN suspension Proprietary phase plug design Downloads Data sheet Drawing Description The HD1050 one inch exit high frequency compression driver has been designed for use in high quality audio systems. Equipped with Eighteen Sound proprietary Phase Plug architecture, the HD1050 has been designed to give high level manufacturing consistency and smooth coherent wave front at the horn entrance across the whole working frequency range. The phase plug with its short openings and high flare rate value assures low distortion and demonstrates remarkable improvements in mid-high frequency reproduction. The diaphragm assembly is composed of a titanium dome sandwiched to a proprietary treated polyester suspension unit. It has been designed to maintain low resonance, lowering the minimum crossover point value at 1,6kHz. An edge-wound aluminum voice coil, wound on proprietary treated Nomex, completes the diaphragm assembly. Thanks to its physical properties, the proprietary treated Nomex former has a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this proprietary former material is also suitable to for use in higher moisture content environments. The HD1050 powerful ceramic magnet assembly has been designed to obtain 16 KGauss in the gap and within a compact ferrite motor structure. GENERAL SPECIFICATIONS Throat Diameter 25,4 mm (1 in) Rated Impedance 8 ohm DC Resistance 5,3 Ohm Minimum Impedance 7 Ohm at 4000Hz AES power (1) 50 W above 1,6 kHz Program power (2) 100 W above 1,6 kHz Sensitivity(1W@1m) (3) 107 dB Frequency Range 1600Hz ÷ 20kHz Recomm. Xover Frequency 1600Hz (12dB/oct slope) Diaphragm Material Titanium - PEN Voice Coil Diameter 44,4 mm (1 3/4 in) Voice Coil Winding Material Edge-wound aluminum Magnet Material Ferrite Flux Density 1,6 T BL Factor 7,4 N/A Polarity Positive voltage on + terminal gives positive pressure in the throat MOUNTING INFORMATIONS Overall diameter 110 mm (4,3 in) Mounting holes diameter 4 M6 holes 90° at Ø 76 mm (3 in) Bolt circle diameter 76 mm (3 in) Total depth 60,5 mm (2,38 in) Net weight 1,8 Kg (4 lb) Shipping weight 1,9 Kg (4,22 lb) CardBoard Packaging dimensions 110x110x63 mm (4,3x4,3x2,5 in) HD1050 MEASURED WITH 1W INPUT ON RATED IMPEDANCE AT 1M DISTANCE ON XT1086 HORN MOUTH AXIS FREE AIR IMPEDANCE MAGNITUDE CURVE

Detalji predmeta Stanje Polovno Proizvođač xxx Mane i oštećenja Nema U kompletu 2 + 2(visokotonci). Ispravni. Dimenzije: 16 x 4 cm, magnet 42 x 21 mm/ prečnik 4 cm, rupe za šrafove 45mm, magnet 35 x 15 mm (visokotonci).

Professional Tweeter for high performance PA/Disco Systems To be used with 6 kHz crossover (18dB/octave)

Par Zvucnika,(dvosistemski) za Medion – MD30329DE-A Lcd TV i druge tipove i modele. Snaga,nikotonci 10W na 8 oma i visokotonci 10W na 8 oma.Dimenzije sredine rupa za ugradnju od do:niskotonci 176mm a membrane 146mm X 33mm, i visokotonci 38mm i 16mm. Zvucnici su ispravni, provereni. Moguca ugradnja.

Napajanje: Strujno Vodootpornost: Ne Osetljivost: >=85dB Impedansa: 6 Ohm Frekvencija: 55Hz - 40kHz Veličina zvučnika: Bass: 3,75" , visokotonci 3/4" EAN: 6923520269990 Sistem: 1.0 Povezivanje: Bluetooth Materijal: Plastika Boja: Crna Snaga: 25W (bas + srednjetonci)+ 15W (visokotonci) Frekvencija: 60Hz - 40kHz Težina: 2,64kg Dimenzije: 277,8x164,8x141,7 mm Link: Stranica proizvođača Link: video

Opis Visokotonski zvučnik 080R SREBRNI Repro VISOKOTONAC 75mm, 4ohm, iz Pure Acoustic kutija Od modela EKS 650 S – satelit, neodimijum magnet 18 mm, težina 23 g Repro VISOKOTONAC 75mm, 4ohm, iz Pure Acoustic kutija Od modela EKS 650 S – satelit, neodimijum magnet 18 mm, težina 23 g

Ribbon visokotonac jedan komad. Pioneer ribboni se prodaju i po 1500$ i skuplje. Gledao sam karakteristike vecine njihovih robbona ravni su sa malim izoblicenjima, koriste obicno berilijum za trake...Video sam da ih neki stavljaju na TAD studio monitore kao super visokotonce jer su brzi i detaljniji od kompresionih koje koriste...Tezina trake je obicno 0,07g, gotovo se trenutno zaustavlja.

Par Zvucnika,(dvosistemski) za MEDION – MD20142 BE-S Lcd TV i druge tipove i modele. Snaga,nikotonci 12W na 8 oma i visokotonci 10W na 8 oma.Dimenzije sredine rupa za ugradnju od do:niskotonci 145mm a membrane 112mm X 48mm, i visokotonci 38mm i 14mm. Zvucnici su ispravni, provereni. Moguca ugradnja.

Par Zvucnika,(dvosistemski) za MEDION – MD30134 AT-S Lcd TV i druge tipove i modele. Snaga,nikotonci 10W na 8 oma i visokotonci 10W na 8 oma.Dimenzije sredine rupa za ugradnju od do:niskotonci 145mm a membrane 114mm X 48mm, i visokotonci 38mm i 16mm. Zvucnici su ispravni, provereni. Moguca ugradnja.