Dimenzije 82 × 46 × 20 cm Brend TELTONIKA Tip Metalni držač za ruter Masa 57g Reklamacioni period 24 meseca Deklaracija Naziv i vrsta robe: Teltonika DZGDF2 RAIL KIT Količina izražena u jedinici mere: komad Uvoznik: EWE COMP D.O.O Zemlja porekla: Kina Prava potrošača: Zagarantovana sva prava kupaca po osnovu Zakona o zaštiti potrošača, kao i odgovornosti za saobraznost Povrat robe moguć unutar 14 dana

Dimenzije 70 × 25 × 14.5 cm Brend TELTONIKA Tip ABS + plastični držač za ruter Masa 6.5g Reklamacioni period 24 meseca Deklaracija Naziv i vrsta robe: Teltonika v6_DIN RAIL KIT Količina izražena u jedinici mere: komad Uvoznik: EWE COMP D.O.O Zemlja porekla: Kina Prava potrošača: Zagarantovana sva prava kupaca po osnovu Zakona o zaštiti potrošača, kao i odgovornosti za saobraznost Povrat robe moguć unutar 14 dana

Tehnička specifikacija: * Acoustic Principle: Pressure Gradient * Active Electronics: JFET impedance converter with bipolar output buffer * Capsule: 1.00" * Polar Pattern: Cardeoid * Address Type: Side * Frequency Range: 20Hz - 20kHz * Output Impedance: 100Ω * Maximum SPL: 132dB SPL (@ 1kHz, 1% THD into 1KΩ load) * Maximum Output Level: 8.0dBu (@ 1kHz, 1% THD into 1KΩ load * Sensitivity: -29.0dB re 1 Volt/Pascal (35.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz * Equivalent Noise Level (A-weighted): 4dB-A * Power Options: +24V phantom power+48V phantom power * Weight: 440.00gm * Dimensions: 187.00mmH x 50.00mmW x 50.00mmD * Output: XLR Output

Genelec 8200-602 | Accessory Kit

Rupert Neve 5060 Rack Kit rack

Specs : Install a single Camden EC1 or a pair of EC1s in a 19-inch 1U rack space High-quality OEM kit is guaranteed to have a precise fit Robustly built to provide secure mounting

The SSL Origin is an inline, 32-channel analog console with two independent signal paths per channel, 16 buses with centralized bus switching, and advanced communications controls in a compact, ergonomic design. Origin combines classic Solid State Logic components like the legendary E Series EQ circuits and Bus Compressor with innovative new features like a fully customizable center section and an all-new transistor-based PURE DRIVE preamp design to deliver unparalleled sound quality and versatility. NEW PURE DRIVE PREAMPS Equipped with an all-new PURE DRIVE preamp design, SSL Origin delivers pristine sound and astonishingly low noise. Inspired by the iconic E and G Series consoles, PURE DRIVE preamps utilize a fully discrete transistor-based design and modern FET components for a classic analog sound. The built-in Drive circuit is perfect for warming up sterile digital signals with musical-sounding harmonics. E SERIES-INSPIRED EQ Engineers all over the world still rely on their trusty E Series EQs to this day. That’s why Origin is equipped with a versatile four-band EQ adapted from the original 424 “Black Knob” circuit of the E series signature channel. This renowned EQ circuit is full of growl and crunch and packs a powerful bottom-end, making it versatile enough to use in almost any situation. The new sweepable high-pass filter offers fully variable frequency selection from 10 to 400 Hz. Those who have worked on a 4K console will instantly recognize the familiar controls. The high and low filters can be switched from bell to shelf, while the two mid bands are fully parametric. Both the high-pass filter and EQ circuit can be independently inserted into the channel and/or monitor paths as needed. INTUITIVE ROUTING Origin offers two independent signal paths and two faders per channel strip for true old-school inline tracking. However, unlike traditional console which features a massive matrix of routing switches, Origin uses an innovative new centralized bussing technique to speed up your workflow and minimize fragile moving parts. Simply hold the route button on the channel and press the route button on one of the 16 dedicated busses for quick and easy routing. In addition to robust routing options, Origin also offers a plethora of mix options. Two dedicated Cue Sends make it easy to create quick mixes, while four Aux Sends can be used for effects sends or additional headphone mixes. CONFIGURABLE CENTER SECTION Every studio is unique; that’s why Origin features a fully configurable Center section. The Center panel houses everything you need to take control of your session including controls for 16 busses, four stereo returns cue mixes, external inputs, talkback and listen mics, a robust communications and output select panel—and of course, the legendary SSL bus compressor. The two additional rack spaces in the center section can be configured to suit your specific needs. Insert your favorite external signal processors, a small control surface, or even mount a monitor directly into the console. Features: 32-channel analog in-line design High quality 100mm large and 60mm small fader on every channel 16+2 buses 4x Monitor outputs 3x Foldback outputs Acclaimed SSL E-Series four band parametric channel EQ Sweepable HPF on every channel Classic SSL Bus Compressor with side-chain access, HP filter and insert point Dedicated channel direct outputs New PureDrive Mic pre and drive circuit New mix bus and mix amp architecture - delivers ultra-low noise floor and huge headroom Balanced Insert Point per Large Fader and Small Fader Channel Paths. Stem-ready 0dB fader bypass switch Unique power management tools deliver ultimate reliability and low running costs Freelance engineer friendly Adjustable centre section features 12U of rack space for: Software controllers Computer keyboard and accessories Additional hardware processing Drop down meter bridge

Genelec 24499 | Truss Mount Kit Genelec Truss Holder

Rupert Neve 5221-RM Horizontal Joining Kit

A professional lighting structure made of 2 three-arm trusses of total length of 3,000 mm mounted on supports and two LS-4 lighting stands. The set allows to mount up to 8 lighting outlets. Advantages of the set include easy and simple assembly. Thanks to the optional cases, the set can be easily transported. weight: 21,00kg material: steel & magnesium width: 3000mm height: 1500mm-3150mm pipe diameter: 28mm load capacity: 60kg (distributed laod) available colours: black Includes: 2x LS-4, 2x R-150, 2x RPG-LS

Specs: Rack ears for the R6 500 Series rack Mount your R6 into any standard 19" rack frame Works with any R6 with serial numbers higher than 250 (shipped after June 2015)

Key Features For Rack Mounting the Source Monitor Fits 19" Studio Rack 1 RU of Rack Space The Dangerous Music SRK SOURCE Rack Kit is a 1 RU 19" rack mountable faceplate for converting the SOURCE Monitor from a tabletop device to a rack mountable device. You simply unscrew the default SOURCE front panel face plate, replace it with the rack kit, and then install it into 1 RU of your studio equipment rack.

The DA2 Digital Audio Module is our newest and most advanced module for processing digital audio. It comes standard in the C55, C53, C2800, and C2700 Preamplifiers and in the MA12000, MA9500 and MA8950 Integrated Amplifiers, allowing these units to take advantage of some of the latest innovations in digital audio technology. McIntosh home audio products equipped with the DA1 can be upgraded to the newer DA2. The models that can be upgraded to the DA2 are: MA9000, MA8900, MA7200 and MA5300 Integrated Amplifiers; MAC7200 Receiver; and C49 Preamplifier. (Note: These models will continue to come with the DA1 installed. Upgrading to the DA2 is an optional dealer installed upgrade that must be installed by an Authorized McIntosh Dealer or Authorized McIntosh Service Agency.) The DA2 Digital Audio Module builds upon the DA1 with an expanded set of capabilities. In addition to having all the same connections as the DA1 (2 coaxial, 2 optical, 1 USB and 1 MCT) a new audio-only HDMI Audio Return Channel (ARC)1 connection is included on the DA2. This allows it to be connected to TVs with a compatible HDMI (ARC) output to bring your TV sound to the next level by listening to it through your home stereo system. ARC functionality can provide two-way communication between your DA2 equipped unit and TV, allowing for volume control and lip-syncing functions to ensure the audio and video are perfectly synched. Popular multi-channel audio formats from Dolby® and DTS® are supported and will be expertly converted to 2-channel audio for proper playback through your DA2 equipped unit. When CEC communication is enabled in both the DA2 equipped unit and your TV, your TV remote can control the power and volume of your connected McIntosh unit. McIntosh DA2 Digital Audio Module Typical DA2 installation. Additionally, the DA2’s USB input can support native playback of up to DSD512, surpassing the DSD256 limit of the DA1. This increased DSD playback support is thanks to the next generation, Quad Balanced, 8-channel, 32-bit Digital-to-Analog Converter (DAC) that powers the DA2. This audiophile-grade DAC is highlighted by both an improved dynamic range and total harmonic distortion compared to the DA1. The USB input also supports DXD up to 384kHz. The coax and optical inputs can decode digital music up to 24-bit/192kHz for high resolution audio playback. Rounding out the DA2 is a proprietary MCT input that offers a secure, custom DSD connection for playback of the high definition audio found on SACDs when paired with our MCT500 and MCT80 SACD/CD Transports to produce the best possible sound quality from your SACD collection. Due to the technical nature of the DA2 upgrade, it's a dealer installed upgrade that must be performed by a qualified trained professional at an Authorized McIntosh Dealer or Authorized McIntosh Service Agency. Please note that if the upgrade is performed by anyone other than an Authorized McIntosh Dealer or Authorized McIntosh Service Agency, under the terms of your McIntosh Limited Warranty any resulting damage or failure of your unit will be excluded from warranty coverage. Contact your local Authorized McIntosh Dealer or Authorized McIntosh Service Agency today to schedule your upgrade. 1) The HDMI ARC input will only play audio from a compatible TV. It will not pass video to or from a TV, or play audio from any non-TV source. HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Dolby is a trademark of Dolby Laboratories. DTS, the Symbol, & DTS and the Symbol together are registered trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved.

Avalon RM-1 konvertuje U5 ili M5 za standardni 19 in. rack system.

Recording Set Includes AI-1 audio interface, NT1 microphone, SMR spider, XLR microphone cable and Ableton Live Lite software Features AI-1 audio interface: USB 2.0 audio interface 24-bit / 96 kHz Gain control with signal LED Switchable direct monitoring of the recording signal Switchable phantom power +48 V 1x microphone / instrument combo input XLR / 6.3 mm jack 2x line output 6.3 mm jack balanced Stereo headphone jack 6.3 mm jack USB-C Power supply via USB Dimensions: 124 x 100 x 38 mm Weight: 560 g Including USB C / A cable Features NT1 large diaphragm condenser microphone: Gold-plated 1" capsule, stored in miniature Lyre of Rycote Black metal housing with scratch-resistant ceramic coating Extremely low self-noise (4.5 dBA) Directivity: Kidney Transmission range: 20 - 20000 Hz Output impedance: 100 ohms Sensitivity: 35.0 mV / Pa Replacement noise level: 4.5 dBA (according to IEC651), Max Output level: +8.0 dBu (1 kHz, 1% THD, 1 kOhm load) Dynamic range: 128 dB Boundary sound pressure level: 132 dB Signal-to-noise ratio: 90 dBA (according to IEC651) Requires phantom power 24 V / 48 V. Connection: 3-pin XLR Dimensions: 50 mm x 190 mm (diameter x length) Weight: 395 g Includes special spider SMR with double lyre by Rycote, pluggable metal pop protection and dust bag Made in Australia 10-year guarantee for registered users (special guarantee between manufacturer and buyer)