The Laserworld CS-2000RGB is a RGB laser system with a total output power of up to 2,000mW. The red deode laser module with a wavelength of 650nm, the green DPSS laser module with a wavelength of 532nm and the royal-blue deode laser module with a wavelength of 445nm ensure brilliant colors and powerful laser beams. The projector has good beam specifications with a beam diameter of about 3mm and beam divergence of 2.0mrad. At the same time it offers a galvo system with up to 30kpps as well as a scan angle of up to 40°. The Laserworld CS-2000RGB has a professional ILDA interface. Thus own or pre-programmed lasershows can be shown by use of a laser control software, e.g. of Phoenix or Pangolin. Through DMX about 200 preset patterns, like waves, tunnels, circles etc. can be projected in different colors and in a various speed. The laser system has an automatic mode, which runs the pre-programmed patterns without assistance. If the music mode is active, the laser system projects according to the sound. For the music mode the sensitivity of the mircophone can easily be set on the rear side of the projector. There is a key switch, an interlock interface and an on-off switch at the rear side of the device. The Laserworld CS-2000RGB is a powerful whitelight laser systems. This device is well suited for professional applications and it is often used in medium to larger sized clubs and discos as well as for the use in any party location. Technical Specifications: min. typ. total power: 1.500mW 2.000mW power red: >500mW / 650nm power green: >200mW / 532nm power blue: >800mW / 445nm beam specs (full angle): ca. 3mm / 2mrad laser source: Deode, DPSS Laser laser class: 4 operation modes: auto, music, DMX, ILDA scanner: galvo system, 30kpps @4° scan angle: 40° max. basic patterns: ca. 200 (layers, tunnels, fences, waves, ect.) accessories: power cable, manual, interlock connector, key power supply: 85V - 250V AC power consumption: 120 W dimensions: 315/335/110 mm weight: 6.1 kg

Dvostruki laser EL-D100G s 2x 50mW sa zelenom diodom. EL-D100G: max 100mW (2 x 50mW), min 80mW 532nm green * Lasers: aircooled DPSS laser * laser class: 3b * Beam properties: 3mm/1mrad * Scanner system: high-speed micro step motors * Deflection angle: max. 30° optical * Scanspeed: 2-5kpps. * Control mode: DMX 512, Stand-Alone (Auto / Sound) * DMX 512: 4 channels * basic patterns: 50 (layers, tunnels, fences, waves...) * effects: more than 250 different beam effects * Laser Safety: compliance to IEC 60825-1 * accessories: power cable, manual. * power supply: 220V - 240V AC (alternative 110V) * power consumption: 40W * measukaišts: 408 x 280 x 120 mm (L x W x H) * weight: 5 kg

Green laser zelene svetlosti, vrlo kvalitetan, koji baca oko 5 km snop svetlosti. Na vrhu u osnovnom stanju ima nastavak koji se rotira i daje efekat lasera koje mozete videti po diskotekama, kao light show.

Disko laser projektor THEBSE sa stroboskopom... Specifikacija: Materijal: Aluminijum Boja lasera: Crvena i zelena Hlađenje: Ventilator Izlazni napon: dc 5.0 1.0 A Ugao laser zraka: 120 stepeni Način reprodukcije: Automatska reprodukcija i glasovna aktivacija, kontrola brzine, kontrola stroboskopa Karakteristike: 1. Veličina, lako nosiv 2. Daljinski upravljač ima više načina rada: Automatski način rada: random boje stvaraju romantičnu opuštenu atmosferu. Način rada bljeskalice: boje se brzo pojavljuju i nestaju. Način aktivacije zvuka: indikator minja boju i brzina u ritmu muzike (baterije u kompletu ne dolaze!) UPOZORENJE: Proizvod je namenjen samo za upotrebu u zatvorenom prostoru, i treba ga štititi od prodora vode. Radna temperatura ovog proizvoda je 15-30 ° C, i nakon 2 sata neprekidnog rada potrebno ga je isključiti, dati laserskoj diodi da se ohladi.

The Laserworld ES-400RGB is a RGB laser system with a total output power of up to 400mW. The red deode laser module with a wavelength of 650nm, the green DPSS laser module with a wavelength of 532nm and the royal-blue laser module with a wavelenght of 445nm ensure beautiful colors and bright beams. These beams have a diameter of about 3mm and a beam divergence of about 2.0mrad and the projector offers a scan angle of up to 30° as well as a galvo system with up to 30kpps for great projections. About 50 preset basic patterns, like layers, tunnels, fences, waves etc. can be controlled via DMX. A sound-to-light mode as well as a stand-alone mode are available too. For the sound-to-light mode the sensitivity of the integrated adjustable microphone can be altered.There is an on-off switch and a controller for projection size settings at the rear side of this device. The Laserworld ES-400RGB is a innovative solution for fist-time and hobby users, as well as for mobile DJs and it is often used in bars, small to medium sized clubs, at private parties or for home use.

EAN: 6942147487921 Dijagonala slike: 75" - 100" Sistem projekcije: DLP Osvetljenje (ANSI lumena): 3.000 Tip osvetljenja: Laser Osnovna rezolucija: 3840 x 2160 (4K)

Veoma atraktivan laser sa puno kombinacija. Za zurke, kafice, letnje baste itd . .. . Mozete pogledati na Youtubu upisite naziv: New Rugby Dj Disco Laser Light Karakteristike: Glasovni mod, svetla će se automatski mijenjati u skladu s tempom muzike. * Jeste li spremni za divlju i strastvenu zabavu? * Želite da kreirate šarene i romantične svetlosne efekte za posebne prilike? * Projektovana svjetla za zabavu stvaraju prekrasne svetlosne efekte pozornice kako bi vašoj zabavi dodali više radosti! * Porodična druženja pretvaraju se u karaoke, gde možete pevati i plesati kako želite! Koncerti su svuda, od bine do porodičnih okupljanja! * Plešite u romantičnoj atmosferi uz živu muziku i jaka svetla! specifikacija: Naziv: Atmosferska lampa LED izvor svetla: Boja svetla: crvena, plava, zelena Napajanje: USB utikač Upravljanje: daljinsko upravljanje, glasovno upravljanje Boja: crna

Laser za zurke, kafice, diskoteke i zabave. Radi na napajanje od 5 volti. Ima 128 kombinacija koje mozete menjati putem daljinskog upravljaca ili ostaviti da radi automatski reszim. Specifications: *Material: aluminium alloy *Input: DC 5V 1A *Remote control battery: WITH BATTERY. *Pattern: 128 patterns mixed *Waterproof: no *Power supplys: USB 5V *LED: RGB Package includes: 1 * Stage Light 1 * Remote Control 1 * USB Cable

Tehnička specifikacija - Lasers: aircooled laser diodes (TEC); RED: circa 150-300mW / 650nm; GREEN: circa 50-100mW / 532nm - laser class: 3b - Beam properties: 3mm/1mrad - Scanner system: high-speed micro step motors - Deflection angle: max. 30± optical - Scanspeed: 2-5kpps. - Control mode: DMX 512, Stand-Alone (Auto / Sound) - DMX 512: 10 channels - basic patterns: 50 (layers, tunnels, fences, waves...) - effects: more than 500 different beam effects - Laser Safety: compliance to IEC 60825-1 - accessories: power cable, manual. - power supply: 220V - 240V AC (alternative 110V) - power consumption: 35W - measukaišts 200RGY: 350 x 285 x 116 mm (L x W x H) - measukaišts 400RGY: 285 x 230 x 160 mm (L x W x H) - weight: 5 kg Dodatne informacije Laserworld laseri iz Ecoline serije nude savršen odnos cene-performanse. Sve jedinice su samostalne i mogu promeniti brojne obrasce koje kontroliše zvuk (ugrađen mikrofon),. osetljivost ulaznog zvuka se može regulisati. Zbog njihove zvučne aktivnosti. Ovi laseri su idealno rešenje za početnike ili manje zahtevne korisnike. Ovo je serija stvarno impresivnih efekt lasera za mali novac!

Led baterijska lampa u kombinaciji sa crvenim laserom. Mogućnost upucavanja. Tri režima rada : lampa laser lampa + laser Šina za kanjenje je 21mm. Mogućnost rada sa mikroprekidačem. Komplet sadrzi: Baterijska lampa sa crvenim laserom Mikroprekidač Punjač za baterije Baterije punjive 16340 ( kom 2 ) Inbus ključ

Opis 1) 8 funkcija: laserski indikator tačke, linija nivoa, vertikalna linija, poprečna linija, Prizemna linija, LED noćni pogled, vodena površina, jak magnet. 2) Ovaj laserski nivelmer se može koristiti za: crtanje pločica, postavljanje ramova svetlosti, postavljanje ormara, poravnavanje prozora, farbanje, stolariju itd. 3) Ova stavka je opremljena sa izravnavačem stativa sa podesivom rotativnom bazom stativa - možete podesiti njegov ugao od 0 do 360 stepeni i nivo. 4) Dužina talasa: 630-680nm 5) Optička snaga: <= 5mV 6) Tačnost: +/- 0,5 mm / M 7) Napon: 4,5 V (1,5 X 3 ćelijske baterije) 8) Maksimalni izlaz: 5M 9) Lasersko zračenje, izbegavajte direktno izlaganje očima

KENSINGTON Expert Presenter red laser

L0447 disko led/laser projektor. .. USB napajanje

EAN: 6942147487778 Sistem projekcije: DMD Osvetljenje (ANSI lumena): 2.200 Tip osvetljenja: Laser

EAN: 6942147476581 Dijagonala slike: 100" Sistem projekcije: DLP Tip osvetljenja: Laser Osnovna rezolucija: 3840 x 2160 (4K)

Quickshow comes from Pangolin, makers of the top selling and most-awarded laser software. Based on Pangolin's 20+ years of experience, Quickshow makes it easier than ever to perform high quality laser shows. The Quickshow package includes the Quickshow software plus the hardware interface (Flashback 3 controller) that goes between your PC computer and your laser projector. Whether you are new to lasers, or have years of experience, QuickShow adapts to your level: You can do basic shows right out of the box. All you have to do is click on cues, or press keyboard keys, to display them in time to the music. QuickShow comes with nearly 2000 pre-loaded graphics, animations, beam effects and abstracts. But there is far more power in QuickShow than simply triggering cues. The next level is the unique QuickTools, which are used to make custom cues such as auto-traced artwork, text, and beam bounces. For example, the QuickShape tool (discussed below) makes it easy to create abstracts and beam effects (cones, fans, planes, etc.). Finally, for the ultimate in customization, use advanced editors for professional-level features such as cue layering and sequencing, automatic beat triggering, timelines for syncing to pre-recorded music, triggering DMX channels, and controlling up to six projectors. With other laser systems, as you click cues and change controls, your work is updated live to the laser. The audience sees every move you make – even when you don’t want them to. QuickShow is much smarter. You can work in the background, setting up cues and trying out different looks.Nothing is sent to the laser until you click the “Show it now” button. A complete laser system QuickShow is a complete laser system. It is capable of graphics as well as beam effects. It has everything you need for a modern laser light show. QuickShow includes the following capabilities: Graphics Still frames (graphics and logos) Animated frames Abstracts Text Automated tracing of bitmaps (BMP, JPG, GIF) Beams and atmospherics Beam targeting Beam shapes (fans, cones, waves, etc.) Show production methods Live shows (laser jockey) Pre-programmed shows Mixed shows with both live and pre-programmed elements Advanced technology QuickShow isn’t just about a better user experience. It also has advanced technology such as the all-new Beyond calculation engine. Beyond automatically takes care of scanner optimization and color mixing. In tests, QuickShow produced noticeably better image quality. One beta tester said: “It made my scanners look new again!” Hardware The Flashback 3 hardware interface that is supplied with Quickshow outputs high-quality projector signals: two 12-bit channels for X and Y scanner signals, and four 8-bit color/intensity channels, typically used to control red, green, blue and intensity signals. Using LiveQUICK, you can specify a cue or sequence of cues to start playing automatically upon power-up. The cue or sequence can play once or continuously. The Flashback 3 is very small -- the same rectangular size as a credit card. And the Flashback 3 only requires a single +5V power supply and consumes only 100-300mA of current. Because of this, the Flashback 3 can easily be integrated into a laser projector with minimal cost. Tools for every level of user Whether you are new to lasers, or have years of experience, QuickShow adapts to your level: You can do basic shows right out of the box. All you have to do is click on cues, or press keyboard keys, to display them in time to the music. QuickShow comes with nearly 2000 pre-loaded graphics, animations, beam effects and abstracts. But there is far more power in QuickShow than simply triggering cues. The next level is the unique QuickTools, which are used to make custom cues such as auto-traced artwork, text, and beam bounces. For example, the QuickShape tool (discussed below) makes it easy to create abstracts and beam effects (cones, fans, planes, etc.). Finally, for the ultimate in customization, use advanced editors for professional-level features such as cue layering and sequencing, automatic beat triggering, timelines for syncing to pre-recorded music, triggering DMX channels, and controlling up to six projectors. Example: Creating abstract shapes To see how this works, let's look at creating various shapes such as abstracts. You can instantly call up a pre-defined shape (cue frame), or create your own basic shapes using the QuickShape tool, or get ultimate control using the Advanced Abstract editor. Click on a bar below, to see how these three levels work for creating abstract shapes. (Other QuickShow tools work in a similar way; for example, QuickText, QuickTrace, and QuickTargets.) 1: For an instant show, just click on pre-defined cue frames 2: Add custom cues with QuickShape 3: For expert users, Advanced Abstract gives complete control For more details, see this chart. Work in the background With other laser systems, as you click cues and change controls, your work is updated live to the laser. The audience sees every move you make – even when you don’t want them to. QuickShow is much smarter. You can work in the background, setting up cues and trying out different looks. Nothing is sent to the laser until you click the “Show it now” button. How background creation works For example, let’s say you are projecting a beer mug... ... and you want to add some scrolling text advertising a “Drink special”. Call up the QuickText tab and type in the words: Try out different looks and colors. You’ll see the text scroll and animate on the computer screen; the audience continues to see only the beer mug. We call this “background creation.” When you are satisfied, click “Show it now”. Your desired text now scrolls across the screen: Thanks to background creation, it looks perfect as soon as it appears. Control your shows using a variety of interfaces Mouse QuickShow can be run using just one hand, if you need your other hand free to adjust lights (or hold a drink! Keyboard Press a key to switch cues on the beat of the music. There are 60 instant cues per screen (3 rows of 10 keys, each shifted or unshifted). Touchscreen QuickShow is specifically designed with large cues and controls, for fingertip use on touchscreen notebooks and monitors. MIDI controller Prefer to use a keyboard or other MIDI controller? You can map MIDI keys to cues and controls. DMX console Just like MIDI, you can map DMX channels to display cues and change controls. (Requires a USB DMX interface; Pangolin recommends the Enttec DMX USB Pro.) Music beat Let your music control the lasers. Automatically makes the laser follow the beat of the music with Virtual LJ. Keyboard equivalents Cue access Cues can be accessed with the letter keys on the computer keyboard (A, S, D, F, etc.). Both shifted and unshifted keys are used to access the 60 cues per page Cue editing Copy cue = CTRL+C Paste cue = CTRL+V Delete cue = CTRL+X Blackout All laser output will be stopped by pressing the ESC key. (Note: This is a convenience feature and should NOT be relied upon for safety features such as laser emergency stop.) Pause PAUSE mode is activated by pressing the PAUSE (break) key Page access Pages (cue tabs) may be assigned to Function keys F1 through F12 Beat-related keys Tapping the SPACEBAR will generate beats and also adjust the speed of the timer. Pressing the BACKSPACE key will generate a beat and will re-synchronize the timer. Virtual MIDI Keyboard The Virtual MIDI Keyboard is shown or hidden each time CTRL+SHIFT+M is pressed. This graphic of a piano-style keyboard visually illustrates the mapping between cues and MIDI keys. (Pressing a cue can trigger a MIDI key; similarly, pressing a key on an external MIDI keyboard can trigger a cue). Invert rotation speed You can invert the rotation speed by pressing "`" or "~" (shifted or unshifted tilde key -- right below the ESC key). QuickShow - Main screen This is a typical QuickShow screen: Within this screen, there are five main areas, plus the menubar. Click on the bars below to learn more about these areas. Cue tabs and gr Play mode buttons (at top) Preview window (top right) Output and effect controls (right side QuickTools (at bottom) Menu bar (at very top) Quick to setup It is easy to get QuickShow adjusted for your projector and screen. Click on the bars below to learn more about QuickShow's various setup screens. Quick Setup wizard Projector settings Projection Zones settings QuickTargets beam settings QuickTools QuickTools are used to create and edit new laser frames, animations, and beam shapes. They are available by clicking tabs on the QuickTool area of QuickShow's main screen. Click on the bars below to learn more about each QuickTool. QuickText QuickShape QuickTrace QuickTargets (beam sequencing) QuickTimeline QuickCapture QuickFX Advanced editors QuickShow has everything you need for quality laser shows. The advanced editors let you create complex laser graphics, that go beyond the QuickTools. These are similar to the editors in Pangolin's Lasershow Designer 2000, the best-selling professional-level software. However, we have updated and simplified these as far as possible, to make them easier to use for new and part-time laserists. Click on the bars below to learn more about QuickShow's advanced editors. Laser Frame/Animation editor Advanced Text editor Advanced Abstract editor Advanced Clock editor Free downloads Software If you do not currently have Pangolin's FB3 hardware or QuickShow, and you would like to download a demo version, click here (version 2.5, build 378). If you already have Pangolin's FB3 hardware, and would like to download the latest version of QuickShow, click here (version 2.5, build 385). Instruction Manual Detailed information on how to use the software and the hardware. QuickShow with Flashback3 QS QS Russian Manual Quick start guide This guide shows how to install QuickShow in 8 easy steps. Download Quick Start Guide Drivers Flashback 3 drivers for all versions of Windows (32-bit and 64-bit) Download a zip file containing all Windows drivers here.

AL-21EYE Party Light od ALIEN - sa novim efektima.  Zahvaljujući efektu miksanja, infracrvenom jedinicom za daljinsko upravljanje i DMX512, ova linija lasera je prikladna za bilo koji događaj, bilo da je to gostovanje dj-a ili klubova velike veličine . Laser AL-21EYE je spoj crvenog, zelenog, plavog lasera i led RGBWUV. Laserski izvori pružaju svetle boje i dvostruke slike crvenog i zelenog lasera. RGB Laser je opremljen IC-daljinskim za bežično upravljanje i prebacivanje između programa, aktiviranje zvukom, ili automatskim programima.

Ukupna snaga: 70mW - 100 mW Snaga - Crveno:> 60mW / 650 nm Snaga - Zeleno:> 10mW / 532nm širina podataka (puni ugao): cca 3 mm / 1.5mrad Laser: deoda, DPSS laserom Klasa lasera: 3b Načini rada: Auto, muzikeni mod Skener: rotirajuća rešetka kotača Skeniranje ugao: 90 ° max. Osnovni obrasci: Strobe i zvijezda učinak Pribor: PSU, daljinski upravljač, mali stativ Radni napon: 100 - 250V AC Potrošnja energije: 20W Dimenzije: 117/93/52 mm Težina: 0,7 kg

Radno područje bez prijemnika 30 m Radno područje sa prijemnikom 60 m Područje samostalnog nivelisanja ± 4° Tačnost ± 3 mm/10 m Boja lasera zelena Broj lasera 2 Projekcija linija frontalno - horizontalno / vertikalno Set sadrzi -baterija 10,8 V -punjač -magnetni držač za profil -PVC kofer

Tehnička specifikacija * diodes: diode laser min. 70mW, max 100mW / 405 nm blue * laser class: 3b * control modes: sound control * mirror system: high-speed stepper motors * animations: 50 (layers, tunnels, fences, waves...) * beam facts: 3mm/1mrad * accessories: mains cable, manual * power supply: 85V - 250V AC * power consumption: 40W * measukaišts: 235mm x 145mm x 70mm (L x W x H) * weight: 3kg

BASEUS Orange Dot laser pointer grey

LOGITECH R500s Laser Presentation Remote középszürke

KENSINGTON Wireless Presenter with Red Laser

SAMSUNG LASER PROJEKTOR SP-LFF3CLAXXXH FREESTYLE