Multi kanalni pasivni VU metar. * 8 x VU meters * Feed impedance: 25 kOhm * Peak or average meter selector * Output impedance: 50 Ohm balanced * Meters set to -10dB as stadard configuration * Recommended * 8 x Peak light indicators * Empfohlene Load Impedance: 1.300 Ohm * 8 x Balanced combo connector inputs * Housing: Metal * Headphone amplifier

Pokidao Vam se Behringerov strujni adapter? Ili ste ga izgubili? Behringerov original zamenski strujni adapter namenjen za sledeće uređaje: UB1002FX, UB1202FX, XENYX (1002FX, 1202FX), QX1002USB, QX1202USB. . Tehnička specifikacija: * Replacement Power Supply for: * UB1002FX, UB1202FX, XENYX (1002FX, 1202FX), QX1002USB, QX1202USB

Tehnička specifikacija * SMP provides the highest level of protection available * LiFT significantly reduces AC line noise * E.V.S. protects equipment from dangerous overvoltage conditions * Zero ground contamination circuitry assures delivery of pure AC * Compact chassis design allows for discrete, unobtrusive placement * Included mounting brackets for installation on a flat screen television mount Dodatne informacije The most widely recognized and trusted name in AC power conditioning is proud to introduce the AC-210 E compact power conditioner featuring Furman-s revolutionary SMP technology. Furman-s Series Multi-Stage Protection (SMP) circuit features our exclusive Linear Filter Technology (LiFT) and Extreme Voltage Shutdown (EVS) and a high current TVZ-MOV. Together; these technologies comprise what is, without question, the world-s most advanced and comprehensive transient voltage surge suppressor. SMP (Series Multi-Stage Protection Plus) Furman-s SMP surge suppression virtually eliminates service calls. Traditional surge suppression circuits sacrifice themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor. Not so with SMP. With Furman-s SMP, damaging transient voltages are safely absorbed, clamped and dissipated - no sacrificed parts, no service calls, no down time. Unique to Furman-s SMP is its unparalleled clamping voltage, even when tested beyond the grueling specifications of - USA/CIDA-s A-1-1 test. While other designs offer clamping voltages that are well above 300VAC peak (far beyond long accepted professional standards), Furman-s SMP clamps at 376VAC peak, 266 VAC RMS even when tested with multiple 6000VAC - 3000 Amp surges! This unprecedented level of protection is only available with Furman-s SMP technology. LiFT (Linear Filtering Technology) Unfortunately, traditional AC filter/conditioners have been designed for unrealistic laboratory conditions. Prior technologies could actually harm audio and video performance more than they help, due to the resonant peaking of their antiquated, non-linear designs. Under certain conditions, these designs can actually add more than 10 dB of noise to the incoming AC line! Worse still, lost digital data, the need to reboot digital presets, or destroyed digital converters are frequently caused by excessive voltage spikes and AC noise contaminating the equipment ground. Furman-s SMP with LiFT takes another approach, ensuring optimal performance through linear filtering and no leakage to ground. E.V.S. (Extreme Voltage Shutdown) Furman-s trusted overvoltage circuitry protects against all too frequent accidental connections to high voltages by shutting off the incoming power until the overvoltage condition is corrected. Compact Chassis Design At only 44.45 mm H x 127 mm W x 215.9 mm D, and weighing in at only 1.36 kg., the AC-210 Es compact, low-profile design makes it ideal for mounting to the back of a flat-screen television, or anywhere that discretely located, remote power protection and purification are needed. Note: This product comes with a choice of plug options. Please consult the plug options located in the accessories section of the product menu.

The unit includes phantom power and battery supplies as standard. Should the phantom power from the console fail or be accidentally switched off, the AR-133 automatically switches over to the internal 9V battery providing uninterrupted use. The unit is housed in a rugged aluminium extrusion case, with robust polyurethane end-cheeks which give the AR-133 a very distinctive look. Input connectors are both 1/4" jack sockets and an XLR socket, the latter meaning that the AR-133 can be used to convert unbalanced signals to a balanced output on XLRs throughout. The arched case allows cables to run back underneath the unit from the end for neat cable management. Input attenuation is 0, -20 or -40dB, making the box suitable for instrument, line or amplifier levels on inputs. On the output side, a ground-lift switch is provided for quick solutions to ground-loop problems. The AR-133 uses an enhanced version of the same audio path as the AR-116, now regarded by many people as a reference standard. The sound quality is legendary, particularly on acoustic and bass guitars. Numerous applications can be satisfied by the AR-133. For example, as well as the traditional guitar use, the AR-133 can be used with keyboards, DJ consoles, amplifier outputs, and other electronic sources. An additional bonus is the ability to use the AR-133 as an active balancing device.

4-channel power audio amplifier for Rack ArtSound PRL-1204 is a 4-channel power amplifier, class D. The amp is extremely compact and can produce 4 x 120W RMS on 8 Ohms or 4 x 200W on 4 Ohms. Connected to a preamplifier like the ArtSound PM-2S01 it allows you to drive a large power on four different channels. ArtSound PR-1204 is equipped with both comfortable feet for surface mounting and a panel for mounting on a vertical rack. Specs: Type : 4-channel 4 x 120W RMS 8Ohm (200W / 4Ohm) final amplifier, class D Description : 4mm aluminum front panel - metal chassis Other : Protection, clip for Rack, LED Inputs : XLR audio combo jacks inputs / outputs- Loudspeaker binding posts Selection : stereo / parallel / bridge switch Dissipation : Innovative heatsink with air flow Input Sensitivity : 0.775V-1.0V-1.44V Signal / Noise : ?95dB Frequency response : 20Hz - 20KHz THD (10% Rated Power) : <0.1% Other : Class D Power Amplifier CircuitT.HD: <0.1% Power supply : 220V / 50Hz Dimensions (mm) : 483 x 250 x 44mm (19 ” / 1U) Weight : 3.8Kgs

Interlink cable realized with two mono jacks with hot resin injected 6,3 mm, two RCA connectors with hot resin injection and shielded cable. Available in black/orange. Length mt. 5. Packaged on blister. Package 1 Cable Type schermato (shielded) Cable Length 5 mt. Connectors Used 2 x jack mono - 2 x RCA Cables Colors Available black/orange Packaging Blister

Professional Microphone Cable realized with moulded female cannon connector and moulded mono jack 6,3 mm. Shielded cable 6 mm. Available in black/orange, length 6 mt. Package 1 Cable Type stereo 6 mm. Cable Length 6 mt. Connectors Used cannon F - jack mono Cables Colors Available black/orange Packaging Blister

Professional Microphone Cable realized with moulded cannon connectors and 6 mm. shielded cable. Available in black/orange, length 9 mt. Package 1 Cable Type stereo 6 mm. Cable Length 9 mt. Connectors Used cannon M - cannon F Cables Colors Available black/orange Packaging Blister

Professional Microphone Cable realized with moulded cannon connectors and 6 mm. shielded cable. Available in black/orange, length 1 mt. Package 1 Cable Type stereo 6 mm. Cable Length 1 mt. Connectors Used cannon M - cannon F Cables Colors Available black/orange Packaging Blister

Assembled microphone cable realized with metal cannon and shielded 7 mm. cable. Available in black. Length mt. 3. Cable Type ø 7 mm Cable Length 3 mt. Connectors Used Cannon M/F Cables Colors Available Black Packaging carton sleeve NOTE Soldering and connection protected through a resin injection.

Assembled instrument cable with 6,3 mm mono metal jack and 6,3 mm mono metal jack 90°, cable diameter 7 mm. Available black color. Length mt. 3. Cable Type ø 7 mm Cable Length 3 mt. Connectors Used JACK mono 6,3 mm - JACK 90° mono 6,3 mm Cables Colors Available Black Packaging carton sleeve

Instrument cable realized with moulded mono jacks and shielded 6 mm. cable. Available in black/orange. Length 3 mt. Package 1 Cable Type mono 6 mm. Cable Length 3 mt. Connectors Used jack mono - jack mono Cables Colors Available black/orange Packaging Blister

Professional cable for stage use High quality industry standard plugs P/U=10 pieces Delivery only in P/U Price per piece Mono jack pluck - female XLR plug

Professional cable for stage use High quality industry standard plugs P/U=10 pieces Delivery only in P/U Price per piece XLR-female - XLR-male Symmetric

Kondenzatorski Lampaški multi-patern mikrofon duge dijafragme. Superiorni studijski mikrofon toplog prirodnog transparentnog karaktera. Za snimanje: skupova, vokala, piana, gudača, tambura. Perfektan za studije ili broadcast. Isporučuje se sa blokom za napajanje, metalnim shock-mount amortizerom, aluminijumskim koferom i kablom.

Studijski cevni mikrofon vrhunskih performansi. Izuzetan kvalitet zvuka - budite spremni na iznenađenje! Stara cena: 1200 EUR RASPRODAJA 999 EUR - cevni kondenzatorski mikrofon - frekventni opseg: 20Hz - 20kHz - osetljivost: 12.6mV/Pa - 38 ± 1dB(0dB=1V/Pa 1000Hz) - kardeoidna karakteristika usmerenosti - impedansa ispod 200ohm - sopstveni šum: 16dB - dinamički opseg: 130dB - napajanje putem isporučene eksterne jedinice Isporučuje se vrhunskim amortizerom za montažu i De Luxe koferom.

Čisti kondenzatorski mikrofon. Optimalnog senzibiliteta i čistih soničnih karakteristika. Frekvencijska osjetljivost: 20-20,000 Hz - jednostruka kondenzatorska kapsula velikog promjera - karakteristika usmjerenosti: kardioidna - frekvencijski opseg: 20Hz - 20kHz - osjetljivost mikrofona: -32dB/1V @ 1Pa - nominalna impedansa: 100 Ω - maksimalni nivo zvučnog pritiska: 145dB (na 1kHz sa 1% ukupnih nelinearnih izobličenja), odnosno 155dB sa aktivnim atenuatorom od -10dB - sopstveni šum mikrofona: 12dB - dinamički opseg: 133dB (na 1kHz pri maksimalnom nivou zvučnog pritiska) - napajanje: 48V 3mA (ne isporučuje se uz mikrofon) - prekidači: odsjecanje basova na 80Hz (12dB po oktavi) + atenuacija -10dB - dimenzije: 170mm (dužina) / 53,4mm (maksimalan promjer) - masa: 360g

The API Model 500VPR is powered externally by a tri-polar power supply and is designed to accept API standard format 5.25" X 1.5" modules. The 500VPR is internally wired for PIN 2 hot, and comes with the API L200PS. The input/output jacks are both XLRs. The 500VPR can hold up to ten API modules. API makes several modules to fit this rack, including the 550A, 550b, 560, 525, and 512c. NOTE: Older API 560A series equalizers used pin 15 for a "direct output" and must be disabled on the 560A circuit board edge connector by cutting a trace. This will eliminate 48 volts from damaging the 560A series equalizers.

A simple but highly effective solution to the problem of needing different pop shields for different vocal performances. The Dual Pro Pop uses a rock-solid gooseneck with both a standard fabric membrane and our professional metal pop shield on a hinged mechanism. You can use either separately or both simultaneously, depending on the application.