Recording Set Includes AI-1 audio interface, NT1 microphone, SMR spider, XLR microphone cable and Ableton Live Lite software Features AI-1 audio interface: USB 2.0 audio interface 24-bit / 96 kHz Gain control with signal LED Switchable direct monitoring of the recording signal Switchable phantom power +48 V 1x microphone / instrument combo input XLR / 6.3 mm jack 2x line output 6.3 mm jack balanced Stereo headphone jack 6.3 mm jack USB-C Power supply via USB Dimensions: 124 x 100 x 38 mm Weight: 560 g Including USB C / A cable Features NT1 large diaphragm condenser microphone: Gold-plated 1" capsule, stored in miniature Lyre of Rycote Black metal housing with scratch-resistant ceramic coating Extremely low self-noise (4.5 dBA) Directivity: Kidney Transmission range: 20 - 20000 Hz Output impedance: 100 ohms Sensitivity: 35.0 mV / Pa Replacement noise level: 4.5 dBA (according to IEC651), Max Output level: +8.0 dBu (1 kHz, 1% THD, 1 kOhm load) Dynamic range: 128 dB Boundary sound pressure level: 132 dB Signal-to-noise ratio: 90 dBA (according to IEC651) Requires phantom power 24 V / 48 V. Connection: 3-pin XLR Dimensions: 50 mm x 190 mm (diameter x length) Weight: 395 g Includes special spider SMR with double lyre by Rycote, pluggable metal pop protection and dust bag Made in Australia 10-year guarantee for registered users (special guarantee between manufacturer and buyer)

At first glance, the TLM 102 stands out from other Neumann microphones because of its extraordinarily compact design. Don't let its size fool you! Inside the TLM 102 sits a large-diaphragm, cardioid capsule that Neumann developed specifically for their next generation of microphones intended for a broad range of applications. Like the rest of the TLM series, the TLM 102 is built around low-noise circuitry and captures sound sources without adding extensive color. It particularly excels with vocals, and the ability to handle extreme SPLs makes the TLM 102 a truly versatile microphone. Neumann TLM 102 Transformerless Cardioid Condenser Microphone at a Glance: A great way to naturally sweeten vocals Tiny condenser with massive versatility TLM technology means low noise and high clarity A great way to naturally sweeten vocals Up to 6kHz the frequency response of the TLM 102 extremely linear. But just after 6kHz, Neumann built in a slight boost to bolster the presence of the voice. This characteristic adds a quality often called "sweetness" to vocals that makes them jump out in the mix. The extra smoothness tends to enhance vocals by smoothing out a highly audible frequency range and adds some extra dimension to spoken recordings. The small stature of the TLM 102 is also a major asset in applications where maintaining a clear line of sight between the vocalist and the control room or or band is a priority. Tiny condenser with massive versatility The TLM 102 has an extremely flexible field of application and is affordable enough to find a place in professional and project studios alike, as well as in broadcast and live sound. Its largely linear frequency response extends across the audible spectrum from 20Hz to 20kHz. Since it doesn't take up as much space as a typical large-diaphragm condenser, it is easy to position the TLM 102 in front of guitar cabinets or use it as a drum mic. And there's no need to worry about high SPLs — the TLM 102 can easily handle up to 144dB, so loud sound sources are not off limits. TLM technology means low noise and high clarity The letters TLM stand for "transformerless microphone." With TLM technology the usual output transformer is replaced by an electronic circuit. TLM technology ensures good common mode rejection, and prevents RF interference that may influence the balanced audio signal. The capsule's built-in elastic suspension mechanism and pop screen in the TLM 102 also further diminish the noise of handling and use. Neumann TLM 102 Transformerless Cardioid Condenser Microphone Features: Maximum 144dB maximum SPL Cardioid pickup pattern 20Hz - 20kHz frequency range 132dB dynamic range 50-ohm impedance Weight: approximately 260g Diameter: 52mm Length: 116mm

Professional Microphone Cable realized with moulded cannon connectors and 6 mm. shielded cable. Available in black/orange, length 4,5 mt. Package 1 Cable Type stereo 6 mm. Cable Length 4,5 mt. Connectors Used cannon M - cannon F Cables Colors Available black/orange Packaging Blister

Instrument cable realized with moulded mono jacks and shielded 6 mm. cable. Available in black/orange. Length 6 mt. Package 1 Cable Type mono 6 mm. Cable Length 6 mt. Connectors Used jack mono - jack mono Cables Colors Available black/orange Packaging Blister

Tehnička specifikacija - Quality microphone XLR cable - Low-wear rubber jacket - For years approved XLR connectors - Efficient lead cleat - Best shielding against noise - Delivery including Velcro strip - ROHS approved - Lifetime warranty on material and workmanship

very flexible fully compatible with any audio device with a 3.5 mm jack female 24 carat gold-plated contacts for loss-free transitions really lightweight very durable

Tehnička specifikacija - Quality microphone XLR cable with Neutrik plugs - Low-wear rubber jacket - For years approved XLR connectors - Efficient lead cleat - Best shielding against noise - Delivery including Velcro strip - ROHS approved - Lifetime warranty on material and workmanship

Professional Microphone Cable realized with moulded cannon connectors and 6 mm. shielded cable. Available in black/orange, length 3 mt. Package 1 Cable Type stereo 6 mm. Cable Length 3 mt. Connectors Used cannon M - cannon F Cables Colors Available black/orange Packaging Blister

Tehnička specifikacija Quality microphone XLR cable Low-wear rubber jacket For years approved XLR connectors Efficient lead cleat Best shielding against noise Delivery including Velcro strip ROHS approved

Professional quality at affordable prices, these studio monitor stands are equipped with adjustable rubber spikes and foam pads for superior stability and sound Main Features plate size - 230 x 230mm height - 400mm weight - 5.90Kg load capicity - 30kg available colours - black

Ovaj H4n daljinski upravljač daje Vam pristup širokom broju funkcija uključujući početak snimanja, pokretanje reprodukcije, zaustavljanje reprodukcije, brzo premotavanje prema napred/natrag, podešavanje glasnoće snimanja, biranje ulaznog izvora zvuka. Osim već nabrojenog, RC4 je koristan za prevenciju pojavljivanja zvukova koji nastaju tokom korišćenja kontrola na Zoom H4n snimaču. Ovaj daljinski upravljač dolazi sa produžnim kablom. Dodatne informacije: This H4n remote control gives you access to a range of functions including recording start, play, stop, fast forward/reverse, recording level adjustment, and input source switching. It is also useful for preventing any handling noise. Comes with extension cable.

Adapter plug 3pin XLR male to 6,3 Jack mono Metal version

Microprocessor-Controlled 8-in-1 Cable Tester Microprocessor-controlled cable tester featuring 3 modes: cable and installed cable test plus test tone mode Accepts all standard connectors: XLR, Speakon*, TRS (1/4", 1/8"), RCA, RJ45, MIDI and USB Super-easy operation with intuitive LED display Continuity check and intermittent contact detection Phantom-power and ground-shield check Test-tone generator: 1 kHz or 440 Hz at +4 dBu, -10 dBV or -50 dBV Operates with 2 AA size batteries (not included) Designed and engineered in Germany

Tehnička specifikacija * Low Distortion with Wide Frequency Response * Two Functions In One Box - Combines And/Or Splits * Phase Invert Switch For Subtractive Combining * Galvanic Isolation To Block Phantom-Power Between Channel * Ground Lift Switch To Reduce Noise Due To Ground Loops Dodatne informacije Use the SPLITCom Pro to Split or Combine balanced low impedance microphone signals. As a Splitter: The SPLITCom Pro provides one direct-coupled output and one isolated output from a single microphone. Applications include sending the direct output to the main or FOH mixer, and the second isolated output to a monitor or recording mixer. The MAIN MIC OUTPUT passes phantom power from the main mixer to the MAIN MIC INPUT for use with condenser microphones. Phantom power is blocked from passing to the ISOLATED MIC OUTPUT. AS A COMBINER: The SPLITCom Pro provides one output from two microphone inputs. The PHASE switch can be used to invert the relative phase of the ISOLATED MIC INPUT. Applications include dual micing of percussion instruments, choirs, and instrument amplifiers. Phantom power passes through each output to their respective input, (MAIN to MAIN, ISOLATED to ISOLATED), however phantom power is blocked from passing between the MAIN and ISOLATED signal paths. Only the audio passes between the MAIN and ISOLATED signal paths (it is present on all inputs and outputs).

3 pola muški cable connector, Nickel housing, silver contacts

A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-10x E in to the top slot of your rack, and the ten switched outlets in the rear panel will power up and protect all your equipment up to a 10-amp load. Instrument Rigs You've got a rack for your effects, preamps, tuner...You're going to plug that into the wall? One big spike and your rig is up in smoke. Furman's standard level surge/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman's standard level RFI/EMI filtration, you'll get a quieter tone without pops, crackles, and the local radeo station coming out of your amp. Plus, dual pull-out lamps (M-10Lx E) let you see your rack without turning the house lights on. Recording Can't track down where that noise is coming from? Your mix sounding flat? With Furman's standard level RFI/EMI filtration you'll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman's standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 10A capacity and eleven total outlets, it's enough to power your whole home studio. DQ Equipment Bars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman's standard level protection and filtration keeps the bad stuff out. Pro Audio When you're out there gigging, you never know what kind of power you're going to get. The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's standard level protection and RFI/EMI filtration. It keeps your equipment safe and sounding clean. Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust. Maximum Output Current: 10 amps Line Cord: 1.5 meter, removable, IEC C-13 female to Schuko male Operating Voltage: 230VAC 50Hz Spike Protection Mode: Line to neutral Energy Dissipation: 305 joules Peak Impulse Current: 12,000 amps Maximum Continuous Operating Voltage: 650 Volts Noise Attenuation: Transverse mode: Greater than 20dB, 1.5Mhz to 200 Mhz Dimensions: 1.75” H x 19” W x 7.5” D Weight: 2.3 kg. Safety Agency Listing: CE Warranty: Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship.

The MS1224 is a 12 channel, 1 into 4 Unity Gain Active Microphone Splitter designed for applications where multiple feeds are required from one set of microphones without the signal degradation experienced with passive splitting solutions. The Unity Gain design principle combined with excellent line driving ability ensures that unity levels are delivered at the end of each feed, even over considerable distance, thereby saving time in recalibrating levels. Each of the MS1224's channels has four independently buffered, transformer balanced outputs and a fifth dedicated parallel Link output. The Link output may be used to provide a direct, non active feed, for instance to the FOH console, or it can be used to daisy chain adjacent channels to provide more output feeds from a single microphone, for instance for Press Box applications. The inputs are electronically balanced with a Pad switch for connection of line level signals. Switchable Phantom Power is provided with a Phantom Presence LED. The MS1224 incorporates a channel monitoring circuit, which is accessed on the PSU unit. Each channel has a Listen button that connects it momentarily both to an LED bargraph and headphone socket on the PSU front panel. The headphone monitor circuit incorporates a dynamics enhancement and protection system. This controls the dynamics of the signal in a way that amplifies very low background levels whilst limiting high signal levels. This enables monitoring of microphone function during set up without the need of a vocalist being present on the mic. It also provides user protection against sudden loud signals. A unique design feature of the MS1224 is the option to configure the way that Input and Output connectors are presented on the front and rear of the unit. As each customer has their own views on this we have given the flexibility of presenting the Input and two Outputs on the front and three Outputs on the rear, or vice-versa. In addition the Output designated as Link can be positioned either below the Input connector, or the top connector of the group of three Outputs. Thereby giving four possible permutations. The required configuration can simply be reconfigured at a later stage.

Profesionalna iPad docking stanica sa mogućnošću audio, video i Midi povezivosti! Novitet od Behringera, iSTUDIO iPad docking stanica je savršeni mizički produkcijski alat bilo za kućni studio ili snimanje svirke uživo. Mnogo više nego samo jedan od načina punjenja baterije za iPad, iSTUDIO Vam omogućava stvaranje, produciranje i izvođenje muzike koristeći Vašu omiljenu audio opremu i muzičke instrumente. iSTUDIO takođe uključuje i dva fantomski napajana mikrofonska/linijska ulaza (jedan selektivni za Hi-Z ulaze poput električne gitare ili bas gitare, DI je nepotreban), tako da možete koristiti studijske kondenzatorske mikrofone kako biste dobili vrhunske profesionalne rezultate. Tehnička specifikacija: * Complete and high-quality Music Studio for Apple iPad (3rd generation), iPad 2 and iPad * Connect your microphones, instruments and audio sources to virtually any audio/MIDI app * Optional battery operation for mobile applications (batteries not included) * Attach to any standard mic, music or drum stand via mounting bracket (P16-MB not included) * Core Audio/MIDI compatible for use with any iOS App * Versatile I/O functionality with adjustable headphone output and direct monitoring control * Separate Video output for connecting your iPad to TVs and projectors * Standard MIDI I/O plus USB-to-host connectors for ultimate MIDI connectivity * iPad powering and battery charging via the iSTUDIO dock * Ergonomic design layout – all control elements on top panel with headphone connector on front * Slide-in access for mating with iPad dock connector suitable for iPad (3rd generation), iPad 2 and iPad * Universal switch-mode power supply with country-specific wall socket adapter included * High-quality components and exceptionally rugged construction ensure long life * Conceived and designed by BEHRINGER Germany

Finally an hybrid microphone boom stand that uses materials technically proper for any function. After many years of manufacturing experience we have been able to mix plastic and metallic materials in order to make the product lightweight in the upper part and heavy where needed, moving down the barycentre. On the critical points of sliding and rotation we obtained fluid movements and strong tighten, avoiding the materials get scratched or damaged during the time. All that studied and elaborated on a perspective of totally innovative design. MS11 Hybrid is addressed to a professional market lover of functional details that, in our opinion, can enjoy our reliable job. Maximum Height 202 cm. Maximum Opening 64 cm. Weight 2,7 Kg Maximum Carriage Capacity 4 Kg in punta (on top) Total Volume 0,08 cmb Package 6 Color black + gray