Garancija: 12 meseci

Garancija: 12 meseci

Garancija: 12 meseci

Garancija:

Garancija: 12 meseci

Built with a lightweight, rapidly responding aluminum-copper voice coil, the MD 435 provides refined high frequencies with detailed transparency that highlights even the finest nuances, allowing subtle vocals to be heard and accentuated effortlessly in the mix. The spring-mounted capsule mitigates handling noise, while the hum compensation coil eliminates electromagnetic interference. Based on MD 9235 Transmitter Capsule The MD 435 has inherited its remarkable acoustics and reliability from the famous MD 9235 transmitter capsule. These qualities are now available in a wired version. Cardioid Pickup Pattern The cardioid pickup pattern allows the user to be at varying distances and angles from the microphone and provides reliable protection against feedback. Advanced Design Highly developed aluminum-copper voice coil forms the basis for a noticeably direct and nuanced sound. Refined, Detailed Sound The MD435 provides refined high frequencies with detailed transparency and highlights even the finest nuances. Even subtle vocals can be heard and accentuated effortlessly in the mix. Features at a Glance Dynamic vocal microphone Lightweight, rapidly responding aluminum-copper voice coil Nuanced reproduction of high frequencies Assertive and resistant to feedback Directional characteristic: cardioid Large-diaphragm diameter Spring-mounted capsule to shield it from body-borne noise Hum compensation coil to eliminate electromagnetic interference Rugged metal design Sennheiser MD 435 Specs Microphone Form Factor Handheld Sound Field Mono Operating Principle Pressure Gradient Capsule Dynamic Polar Pattern Cardioid Orientation End Address Pad None High-Pass Filter None Tone Adjustment None On-Board Controls None Windscreen Foam (Included) Performance Frequency Range 40 Hz to 20 kHz Maximum SPL 163 dB SPL Impedance 245 Ohms Load Impedance 1 Kilohms (Minimum) Sensitivity 1.8 mV at 1 kHz Dynamic Range 146 dB A-Weighted Equivalent Noise Level 17 dB A-Weighted Connectivity Output Connectors (Analog) 1 x XLR 3-Pin Male (on Mic) Physical Color Black Mounting Mic Clip/Stand Adapter (Included) Construction Material Metal Dimensions ø: 1.9 x L: 7.1" / ø: 47.5 x L: 181 mm Weight 12.3 oz / 350 g

The microphone features a supercardioid pattern providing impressive rejection of off-axis noise due to mechanical noise, room ambiance, monitors, etc. The dynamic capsule handles high sound pressure levels and provides a wide 30 Hz to 20 kHz frequency response. This makes the microphone suitable for drums, percussion, electric guitar, horns, and other instruments with high transient (peak) response. Adding to the versatility is a 5-position low-frequency roll-off switch and a 2-position high-frequency contour switch. The output stage features a humbucking coil, suppressing noise and hum caused by bad cables, grounding, etc. Dynamic Capsule The MD 441-U features a shock-mounted internal capsule resulting in even signal response in close and reasonable distances. Supercardioid Pattern The supercardioid polar pattern is effective in attenuating off-axis noise and ambiance. 5-Position Bass Roll-Off The 5-position, low-frequency roll-off switch offers flexible bass attenuation allowing the microphone to be used in a variety of situations. 2-Position High-Frequency Contour The High-Frequency (treble boost) switch accentuates high-end frequencies for added intelligibility. Integral Windscreen An integral windscreen provides effective diffusion of wind due to explosive "P" and "B" sounds and adds further protection to the capsule. Sennheiser MD 441-U Specs Microphone Primary Applications Live Sound, Studio Recording Form Factor Stand/Boom Mount Intended Sound Sources Vocals, Instrument Sound Field Mono Operating Principle Pressure Gradient Capsule Dynamic Polar Pattern Supercardioid Orientation End Address High-Pass Filter None Tone Adjustment None Gain Adjustment None On-Board Controls None Windscreen Built-In Performance Frequency Range 30 Hz to 20 kHz Impedance 200 Ohms Load Impedance 1 Kilohms Sensitivity 1.8 mV/Pa Connectivity Output Connectors (Analog) 1 x XLR 3-Pin (on Mic) Headphone Connector None Physical Mounting Mic Clip/Stand Adapter (Included) Dimensions H: 1.31 x W: 1.44 x L: 10.62" / H: 33 x W: 36 x L: 270 mm Weight 12 oz / 450 g

Microphone horn clamp for attaching the e 908 or the e 608 to the bell of a brass instrument. Clamp is an included accessory of the e 908 B. Specifications Weight 47 g

iRig Mic Lav is chainable. That means it can double your recording power by letting you easily chain up to two iRig Mic Lav's to the same device. Each iRig Mic Lav captures high-quality audio thanks to its omnidirectioinal condenser capsule and foam pop shield. And recording convenience is taken to the next level thanks to its on-board headphone monitoring output, secure mounting clip, generous cable length and durable roadworthy design. And best of all, you can have all these premium features at a price as small as the device itself. Portable performance iRig Mic Lav gives you the power to record great sounding audio anytime and anywhere. Designed to meet the exacting demands of broadcast professionals, its omnidirectional condenser capsule lets you capture a 30Hz - 16kHz frequency range of crystal-clear audio from all directions. It comes with a foam pop filter to eliminate vocal plosives, wind noises and other unwanted sounds. And like all good lavalier microphones, it comes with a durable mounting clip that you can easy mount on a t-shirt, lapel or other material for dependable and secure hands-free recording. Just clip it on, and you'll be ready to go. Effortless monitoring Capturing great audio in the field requires more than just superior microphone technology. To get the best sound, you have to be able to monitor your source as its being recorded. Not all lavalier microphones come with on-board monitoring, but iRig Mic Lav does. In fact, among major brands, it's the first mobile lavalier microphone to offer this feature. It comes with a combo 1/8" TRRS port that can be used to output audio to your favorite pair of headphones. Just set the toggle switch next to the port to "monitor" and plug in your headphones, and you'll be on your way to recording effortlessly amazing audio. Chainable power There's a saying that goes something like, "two heads are better than one." The same can be said for microphones — when you're out in the field, sometimes you need to record more than one person. iRig Mic Lav lets you chain and record with up to two iRig Mic Lav's on the same device thanks to the same dual-purpose 1/8" TRRS port used for headphone monitoring. Simply set the toggle switch to “input,” and then plug a second iRig Mic Lav in to record with two microphones. To monitor a dual iRig Mic Lav setup, you just need to set the switch on the second iRig Mic Lav’s jack to “monitor,” and then you'll be able to plug in your headphones. Want to get your hands on two iRig Mic Lavs for one low price? The iRig Mic Lav 2 Pack is a bundle that gives you two iRig Mic Lavs in one package for a reduced price so you can record from two sources at the same time using iRig Mic Lav's unique chainable feature. Now you can enjoy all the recording power and flexibility of two superior mobile lavalier microphones for one incredibly low price. You never know what mobile device you'll have accessible while you're out conducting that next heated interview or spontaneous Youtube video. This can be a problem if a microphone is specifically made for one type of device. Fortunately, you'll never have that problem when iRig Mic Lav is in your pocket. It outputs its sound via an analog 1/8" TRRS output jack, and it captures the same high-quality audio no matter whether it's plugged into an iPhone or an Android device with a compatible TRRS input jack compliant with the CTIA/AHJ wiring standard. In other words, with iRig Mic Lav you can make quality recordings anytime, anywhere and on any mobile device. Presenting with Power Pair iRig Mic Lav with VocaLive or EZ Voice and an iLoud portable speaker, and you'll have the perfect "hands-free" portable PA system that you can easily fit in a briefcase or backpack for trade shows, small group gatherings and other mobile presentations. Features Professional mobile lavalier microphone for all devices High-quality omnidirectional condenser capsule Includes foam pop shield and durable mounting clip 1/8" TRRS jack connects to iPhone, iPad, iPod touch, Android Combo 1/8" TRRS port can be used for headphone monitoring/line out to powered speaker Combo 1/8" TRRS port can be used for chaining up to two iRig Mic Lavs to the same device Compatible with any audio app that accepts audio from headset input Comes with a suite of powerful recording apps 150cm/66” cable Also available as 2 Pack – iRig Mic Lav 2 Pack Powered up with apps With iRig Mic Lav, you're ready to record right out of the box thanks to its powerful suite of included apps. You get iRig Recorder FREE for iPhone, iPad and iPod touch and Android, a straightforward audio capture app that is great for everything from recording journalistic interviews to making podcasts while on the go (and everything in between). Powered up with apps VocaLive is an expandable, powerful effects processor and multi-track recording app that’s perfect for adding a creative touch to audio. EZ Voice for iPhone, iPad and Android is a streamlined and easy-to-use app loaded with vocal effects that make it easy to practice and record over any song stored in your device’s music library. Specs iRig Mic Lav Specifications Transducer Type: condenser, electret Polar Pattern: cardioid Frequency Response: 30 Hz - 16 kHz, -3dB Max SPL: 120dB SPL Sensitivity: -35±3dB at 1 kHz, 0dB=1V/Pa Capsule diameter: 6mm/0.24" Cable length: 150cm/59.1" Output connector: 1/8” TRRS Package includes iRig Mic Lav (x2 for iRig Mic Lav 2 Pack) Removable foam windshield Removable mounting clip Carrying case Dimensions Microphone size: 24mm/0.94" x 7.5mm/0.3" In-line connector size: 24mm/0.94" x 24mm/0.94" x 14mm/0.55" Weight: 22g/0.78oz Cable length: 150cm/59.1" Compatibility iOS Devices Compatible with iPhone X*, iPhone 8 Plus*, iPhone 8*, iPhone 7 Plus*, iPhone 7*, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPhone 3GS, iPod touch (6th, 5th, 4th and 3rd generation), iPad Pro (12.9-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad 4th generation, iPad mini, iPad 3rd generation, iPad 2, iPad. iOS 4.3 or later is required. * Requires use of Apple's Lightning to 3.5 mm Headphone Jack Adapter (TRRS). Android Devices To be compatible, the mobile device must be compliant with the CTIA/AHJ wiring standard, which is illustrated as follows. As of today, all popular Android devices branded Samsung, LG, Motorola, Google Nexus, HTC, Huawei, Sony, Lenovo, Xiaomi and more, use this standard.

The EM-98MS sports an internal, USB-charged lithium-ion battery that provides long-lasting performance, and an auto on/off function makes sure your mic turns on and off with your devices automatically. Onboard high-pass and -10 dB pad switches allows for further rumble elimination and distortion protection, and the mic comes with labeled cables designed to perfectly mate your microphone with any camera audio input or mobile smart device, making it the ideal companion to any on-the-go user. Capture the Subject, Not the Environment Not only do shotgun microphones sound perfect for video, dialogue, and capturing specific sounds, they do it while rejecting most other noises. This is thanks to the long shape of the microphone that works to cancel out sound from the sides. This is especially helpful when shooting video outdoors where ambient noise can really try to intrude on your recording. The physical design, combined with the onboard high-pass filters for eliminating rumble and included windscreens ensure clean, transparent audio for truly professional videos. Powerful Built-In Controls The EM-95MS features a number of useful controls and indicators to let you get the most out of your shotgun microphone. Whether recording indoors or outdoors, this shotgun mic can tackle numerous shooting and recording scenarios with ease. Fully variable gain allows for precise level control 75 / 150 Hz high-pass filter switch to eliminate low-frequency rumble -10 dB pad for overdrive protection and clean audio to work with in post Auto on/off automatically turns the mic on and off with your device Flexible Mounting This microphone not only comes with an integrated cold shoe shockmount, allowing you to attach your shotgun directly to a camera with minimal vibrations or handling noise, but it can also be mounted onto 3/8" tripod screws. Separate foam and furry windscreens are also provided for protecting your mic from wind during indoor and outdoor shooting respectively, and a convenient included carry case allows you to easily transport your mic and all of it's accessories in one container. Mackie EM-98MS Specs Microphone Primary Applications Live Sound, Recording to Mobile Device, ENG (Electronic News Gathering), Audio for Video, Location Sound, Field Recording Form Factor Camera-Mount / Mobile Device Mic / Shotgun Mic Intended Sound Sources Speech/Voice Over, Instrument Sound Field Mono Operating Principle Line Gradient Capsule 1 x Condenser Polar Pattern Supercardioid Orientation End Address Circuitry Solid-State Pad -10 dB High-Pass Filter 75 Hz 150 Hz Tone Adjustment None Gain Adjustment Yes Indicators 4 x Green Single LED (Status) On-Board Controls Gain/Sensitivity, High-Pass Filter, On/Off, Pad Windscreen Windsock/Windjammer (Included) Foam (Included) Performance Frequency Range 30 Hz to 20 kHz Impedance 200 Kilohms (Unbalanced) Sensitivity -24 dB Signal-to-Noise Ratio 80 dB Connectivity Output Connectors (Analog) 1 x 1/8" / 3.5 mm TRRS Female (with Included Adapter) Headphone Connector 1 x 1/8" / 3.5 mm Power Operating Voltage 3.7 V (Battery Power) 5 V (USB Bus Power) Operating Current Consumption 230 mA Battery Type 1 x Built-In (Included) Battery Chemistry Lithium-Ion Battery Capacity 320 mAh / 1.184 Wh Physical Color Black Mounting Camera/Shoe-Mount, Shockmount (with Included Hardware) Mounting Thread Size 3/8"-16 Female Included Case Soft Case Included Filters None Dimensions ø: 0.9 x L: 8.5" / ø: 2.3 x L: 21.6 cm Weight 0.19 lb / 86 g

Features Features a stereo mini-jack headphone output enabling real-time monitoring of what is being recorded using headphones or speakers. Offers a mini-switch that provides two different sensitivity settings to record close-up or distant sources. Includes an adjustable desktop stand for convenient iPhone/iPod touch positioning during recording. Has a bumper-friendly mini-jack connector that fits the majority of iPhone/iPod touch cases. Has an ultra-compact profile that can be carried anywhere with ease. Like other IK Multimedia microphones, it includes 2 free apps: iRig Recorder, an easy-to-use voice recording/editing app, and VocaLive, a multi-effects processing app for singers. Works with all regular phone calls and any Voice-Over-IP app. Is compatible with iPhone/iPod touch/iPad. How it works Ultra Compact Design The iRig Mic Cast is literally about the size of a large coin. It can easily fit in your pocket, briefcase or computer bag for easy transport. Plus, its compact size means you can use it anywhere – from the classroom to the boardroom. Dual Gain Setting One of the most frustrating things about portable mics is the inability to get good clear recordings from sound sources that are not close to you. iRig Mic Cast solves this problem with a dual gain switch that allows you to capture up-close audio as well as audio from sources not so close. Comes with a Tabletop Stand Now you can set up your iPhone or iPod Touch and record hands-free thanks to the included tabletop stand. Simply place the stand wherever you need it, put your iOS device in and hit record. No Additional Additions Needed Set up is easy: Plug the iRig Mic Cast into the headphone out “TRRS” jack. You’re now ready to record. Plus, iRig Mic Cast comes with two apps for recording and sound processing: iRig Recorder – a simple, no frills high quality recorder, and VocaLive – our professional vocal processing, effects and recording app. With iRig Mic Cast, making outstanding quality recordings is literally as easy as opening an app on your iOS device. Works with All of Your iOS Devices iRig Mic Cast is compatible with all iOS Devices with a headphone/audio in TRRS jack, like iPhones, iPod touch and iPads. And, you can use the iRig Mic Cast as a hands-free calling microphone for conference calls and speaker phone applications. Plus you can rotate the iRig Mic Cast to get the best capture angle, increasing the quality and fidelity of your recordings. Works With Your Android Devices Now you can plug the iRig MIC Cast into your Android device and capture stunning high quality audio. Use the iRig MIC Cast and your favorite Android audio apps to capture podcasts, lectures, speeches, interviews, concerts and spurts of creative brilliance. iRig MIC Cast is fully compatible with most devices and apps that support and process audio — apps like Skype, Tune Me, the Booth Rap Studio, Voice Pro just to name a few. No additional software is required, simply plug iRig MIC Cast into your 1/8” (3.5mm) headphone/input jack and launch your favorite app. Also, iRig MIC Cast comes with iRig Recorder FREE for Android, an extremely easy to use intuitive audio capture and processing app that will quickly become your “go-to” app for quick audio recording. Specs iRig Mic Cast Specifications Microphone Type: condenser electret Polar Pattern: unidirectional/cardioid Frequency Response: 100 Hz - 15 kHz, -3dB Maximum Sound Pressure: 110 dB Distortion: 3% THD at 110 dB, 1 kHz Windscreen: built-in Package includes iRig Mic Cast ultra-compact audio capture microphone Portable table-top stand for iPhone/iPod touch Dimensions Size: 30mm/1.18" x 47mm/1.85" x 10mm/0.39" (W x L x H) Weight: ~15g/0.52oz Requirements iOS Devices Compatible with iPhone X*, iPhone 8 Plus*, iPhone 8*, iPhone 7 Plus*, iPhone 7*, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPhone 3GS, iPod touch (6th, 5th, 4th and 3rd generation), iPad Pro (9.7-inch), iPad Pro (12.9-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad 4th generation, iPad mini, iPad 3rd generation, iPad 2, iPad. iOS 4.3 or later is required. * Requires use of Apple's Lightning to 3.5 mm Headphone Jack Adapter (TRRS). Android Devices To be compatible, the mobile device must be compliant with the CTIA/AHJ wiring standard, which is illustrated as follows. As of today, all popular Android devices branded Samsung, LG, Motorola, Google Nexus, HTC, Huawei, Sony, Lenovo, Xiaomi and more, use this standard.

PG58 Vocal Microphone A rugged microphone tuned to accentuate the clarity of lead and back-up vocals. PG58-QTR includes a 15ft (4.57m) XLR to 1/4" Cable, Microphone Clip, 5/8" to 3/8" Thread Adapter, and a Storage Bag. PG58-XLR includes a 15ft (4.57m) XLR to XLR Cable, Microphone Clip, 5/8" to 3/8" Thread Adapter, and Storage Bag. Tailored frequency response is smooth and extended. Tuned specifically for vocal applications. Cardioid polar pattern picks up the most sound from in front of the microphone and some sound from the sides. Less susceptible to feedback in high volume settings. Dynamic cartridge has a simple, rugged coil. Handles extreme volume levels without distortion. Cartridge includes a neodymium magnet for high output level. Internal shock mount for reduced handling noise. Durable metal construction. On/off switch for onstage control. Hardened steel mesh ball grille that resists wear and abuse. Integral "pop" filter reduces explosive breath sounds and wind noise. Includes 15ft (4.57m) cable, break-resistant mic clip and storage bag. Replacement cartridge: RPM150. Microphone Type Dynamic (moving coil) Polar Pattern Cardioid (unidirectional) Frequency Response 60 to 15,000 Hz Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector Output Impedance (at 1000 Hz) 300 ohms Sensitivity (at 1000 Hz) -53 dBV/Pa, (2.2 mV), 1 Pascal=94 dB SPL Electromagnetic Hum Sensitivity 26 dB equivalent SPL in a 1 millioersted field (60 Hz) Switch Built-in On/Off switch Connector Three-pin professional audio connector (male XLR type) Case Die cast metal handle, black matte finish; hardened silver colored, spherical steel mesh grille Environmental Conditions This microphone operates over a temperature range of -29 to 57 degrees Celsius (-20 to 135 degrees Fahrenheit), and at a relative humidity of 0 to 95%. Weight Net: 321 g (11.3 oz) Packaged: 908 g (2 lb)

The AVX-ME2 SET includes a bodypack transmitter with lavalier microphone, the plug on receiver and all accessories to operate out of the box with camcorders as well as DSLR cameras. It features self configuring digital transmission which eliminates time-consuming radio frequency setup. The ultra compact receiver rotates around the XLR connector to avoid collision with other devices mounted on your camera. It switches on and off automatically with your camera - saving battery power. The AVX matches perfectly to your camera's input sensitivity without having to adjust the audio level on the microphone. From professional wedding video to documentaries, from street interviews to corporate videos, the AVX just works allowing you to concentrate on creativity. Key Features Very fast setup Plugs directly into XLR audio input Ultra compact receiver Switches on/off by P48 Phantom power Optimized dynamic range Auto frequency management AES 256 encryption License free Accessories included for DSLR use Metal housing Made in Germany Color black Frequency response 20 Hz - 20000 Hz THD, total harmonic distortion typ. 0.1 % Weight Receiver: 87 g (incl energy pack) Audio input 3,5 mm mini jack Audio output XLR Operating temperature -10 °C - + 55°C Signal-to-noise ratio > 90 dB(A) RF output power adaptive up to 250mW (peak) country specific Operating time > 4h (Receiver), typ 15 h (Transmitter with LiIon energy pack) Modulation GFSK (DECT) Audio output level -30 dBu - 0 dBu in 4 Steps Battery Specification Li-Ion 3,7 V DC Dynamic range > 120 dB(A) Frequency band 1880 - 1930 MHz (Country specific) Sampling rates 24 bit / 48 kHz Latency 19 ms What's in the Box Plug-on receiver Energy pack USB charger USB charging cable Bodypack transmitter ME 2 lavalier microphone Microphone clip Hot shoe mount Beltclip XLR to mini jack cable Pouch

Your kick beater will be well represented; and don't even worry about your feet pushing sound pressure levels into overload, because the PR 48 can handle up to 148 SPL all day long. The HDK-5 kit also includes (four) Handi Mic Pro Plus's to capture snares, cymbals, and toms with rich sound and clarity. Handi Mic's are incredibly versatile due to their 4" tall footprint; fitting into places other microphones cannot reach, like inside roto toms. The Handi Mic Pro Plus microphones also have shock mounted elements, plus the phase plug design and porting expertise to produce a most natural, linear sound, for which Heil microphones are known. The HDK-5 includes four HM (standard ⅝"-27) mic clips, along with two patent-pending HH-1 mic clips; perfect for mounting to rims, or to tom hoops. The HDK-5 is a great value drum mic kit for rock, blues, jazz, metal, gospel, and more. You get all this, in a protective padded leatherette carrying case ready to go. Heil Sound HDK-5 Features PR 48 kick beater has a custom-tailored frequency response to enhance low and subsonic frequencies while preserving mid-range attack and high-end nuances Handi Mic Pro Plus dynamic microphone with small form-factor All mics are easily mounted with standard and new mic clips (included) Handi Mic Pro Plus Transducer Type: dynamic Frequency Response: 80 Hz - 14,000 Hz Polar Pattern: super cardioid Impedance: 600 Ω balanced Connector: 3 pin XLR Dimensions Height: 4.5" Width: 1.5" Weight: 4.63 oz PR 48 Transducer Type: dynamic Frequency Response: 30 Hz - 8,500 Hz Polar Pattern: cardioid Impedance: 250 Ω balanced Connector: 3 pin XLR Weight: 20.33 oz HH-1 Mountaccepts 1/4"-20 and 5/8"-27 standard mic threads

The internal hum-compensating coil impedes electrical interference while the durable, metal construction delivers road-ready toughness. The XLR 3-pin output ensures compatibility with most microphone preamps and mixer inputs. The e935 ships with a mic clip and a protective pouch. Cardioid Polar Pattern The e935 features a cardioid polar pattern, effective in rejecting off-axis signal that can cause noise and feedback Hum Compensation Coil The integrated hum-compensating coil is effective in reducing line and electrical hum Neodymium Magnet The neodymium ferrous magnet with boron keeps the microphone stable regardless of climate Tailored Frequency Response The e935 features a tailored 40 Hz to 18 kHz frequency response for accurate reproduction of vocals and speech Shock-Mounted Capsule The shockmounted capsule delivers low sensitivity to impact and handling noise Rugged Design The rugged metal construction yields durability in the studio and on the road Sennheiser E935 Specs Microphone Form Factor Handheld Sound Field Mono Operating Principle Pressure Gradient Capsule Dynamic Polar Pattern Cardioid Orientation End Address Circuitry Solid-State Pad None High-Pass Filter None Tone Adjustment None Indicators None On-Board Controls None Windscreen Foam (Available Separately) Performance Frequency Range 40 Hz to 18 kHz Impedance 350 Ohms Load Impedance 1000 Ohms Sensitivity 2.8 mV/Pa at 1 kHz Connectivity Output Connectors (Analog) 1 x XLR 3-Pin (on Mic) Physical Mounting Mic Clip/Stand Adapter (Included) Included Case Pouch Included Filters None Construction Material Metal Dimensions ø: 1.85 x L: 5.94" / ø: 46.9 x L: 151 mm Weight 12.52 oz / 355 g

Revolutionary acoustic design, delivering a natural, uncoloured sound. Extremely lightweight (just 76g), and short in length (just 203mm) Tailored frequency response and very low self-noise of just 10dBA Highly directional supercardioid polar pattern and smooth off-axis response RF-bias technology and conformal coating ensure superior performance in adverse environmental conditions Comes in a complete location recording kit with WS10 windshield, PG2-R pistol grip and other accessories The NTG5 is a boom operator’s dream, weighing a mere 76g and measuring just over 20cm, making it ideal for use on long, demanding shoots. It features RF-bias circuitry to ensure reliable performance in adverse environments, with excellent resistance to high humidity, severe cold, damp, and dust. And it comes with a WS10 deluxe windshield, PG2-R pistol grip, and other accessories – the perfect location recording kit. NTG5 SPECIFICATIONS ACOUSTIC & ELECTRICAL SPECIFICATIONS Acoustic Principle RF-bias condenser Active Electronics RF-bias demodulation Polar Pattern Supercardioid shotgun Frequency Range 20 Hz – 20 kHz Frequency Response 80 Hz - 20 kHz ±3 dB Output Impedance 25 Ω Signal to noise Ratio 84 dB Equivalent Noise 10 dB SPL (A-weighted, as per IEC651) Input SPL @ 1% THD 130 dB SPL (1kHz @ 1% THD, 600 Ω load) Power Requirements 2 mA @ 48V phantom power Sensitivity -23.5 dB re. 1 Volt/Pascal or Better (66 mV @ 94 dB SPL @ 1 kHz) MECHANICAL SPECIFICATIONS Dimensions (L x W x H, mm) NTG5: 203 x 19 PG2-R:117 x 60 x 240 Weight (g) NTG5: 76g PG2-R: 224g

Compact size and lightweight - only 80mm (3’) long and 42gm (1.5oz) All-metal microphone body No battery required (powered by camera plug-in power - 2V-5V) Rycote® Lyre® shock mount included Deluxe furry windshield included Designed and manufactured in Australia Two year extended warranty when you register your microphone Its pickup is more forgiving than RØDE’s other on-camera microphones providing a more natural sound when recording indoors. Perfect for capturing incredible audio to accompany inspiring vision. The microphone body is made from aluminum, giving it a high level of RF rejection, and is finished in RØDE’s high-grade ceramic anti-glare black coating. Included with the VideoMicro is a camera shoe mount featuring a Rycote Lyre shock mount. Featuring a suspension structure composed of a hard-wearing thermoplastic, it is far more effective at minimising unwanted vibrations, handling and cable-borne noise than traditional elastic suspensions. Virtually indestructible, the Rycote Lyre will never sag, snap, wear out or require rethreading to maintain its effectiveness. Also included is the WS9 synthetic furry wind shield with foam inner cell, designed for use in outdoor scenarios where wind and environmental noise can inhibit recordings. Optionally available is the RØDE SC7, a TRS to TRRS cable that allows the VideoMicro to be used with smartphones, to capture crystal clear, directional sound for video and video applications such as Periscope. VideoMicro Specifications ACOUSTIC & ELECTRICAL SPECIFICATION Acoustic Principle Pressure Gradient Active Electronics JFET impedance converter Capsule 0.50" Polar Pattern Address Type End Frequency Range 100Hz - 20kHz Maximum SPL 140dBSPL Sensitivity -33.0dB re 1 Volt/Pascal (22.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise (A-weighted) 20dBA Power Requirements 2V-5V DC Output Connection Warranty 1 year with free extension to 2 years following registration here IN THE BOX: VideoMicro Lyre Shoe Mount Lyre shoe mount SC2 3.5mm TRS patch cable WS9 Deluxe Wind Shield

Fast, flexible and professional: these characteristics make the ew 112-p G3 the perfect fit for every ambitious reporting team seeking both portability and great sound quality. The nearly invisible clip-on omni-directional microphone transmits its signal via a bodypack transmitter with mute function and a portable, battery-powered adaptive-diversity receiver. The receiver and transmitter are lightweight and easy to operate, yet rugged and packed with features. Features Sturdy metal housing (transmitter and receiver) 42 MHz bandwidth: 1680 tunable UHF frequencies for interference-free reception Enhanced frequency bank system with up to 12 compatible frequencies Adaptive-diversity reception for high reception quality Pilot tone squelch for eliminating RF interference when transmitter is turned off Automatic frequency scan feature searches for available frequencies Enhanced AF frequency range Increased range for audio sensitivity Wireless synchronization of transmitters via infrared interface User-friendly menu operation with more control options Illuminated graphic display (transmitter and receiver) Auto-Lock function avoids accidental changing of settings HDX compander for crystal-clear sound Transmitter and receiver feature battery indicatation in 4 steps Programmable Mute function Contacts for recharging BA 2015 accupack directly in the transmitter or receiver Wide range of accessories adapts the system to any requirement Delivery Includes 1 EK 100 G3 diversity receiver 1 SK 100 G3 bodypack transmitter 1 ME 2 clip-on microphone (omni-directional) 1 CL 1 jack cable 1 CL 100 XLR cable 1 CA 2 camera adaptor 4 AA batteries Operating instructions

Ništa ne nadmašuje GoPro kad je u pitanju neposrednost, akcione fotografije - ali bez vrhunskog zvuka možete se samo delimično približiti. Ovaj višesmerni mikrofon lavalier može se direktno povezati s objektom, omogućujući vam snimanje svih naracija, komentara i psovki sa oštrim, vernom zvukom. Uključeni pop filter i krzneni „deadcat“ vetrobran se čvrsto postavljaju preko mikrofonske kapsule, pružajući zaštitu od udara vetra od 360 stepeni kao i od buke ili bilo koje druge ambijentalne buke u pozadini. Ne samo što je SR-GMX1 dramatično unapređenje u odnosu na ugrađeni GoPro mikrofon, već je i Saramonic-ov najmoderniji i tehnički najsloženiji GoPro mikrofon do danas. Kombinacija vrhunskih audio komponenti sa čvrstim, potpuno metalnim kućištem, GMX1 vam daje bolju osetljivost i veću izdržljivost od bilo kojeg drugog GoPro lavalier mikrofona na tržištu. Specifikacije Polarni patern: Višesmerni Frekventni odziv: 30Hz to 18kHz Izlazna impedansa: 2.2k Oma Odnos signal-šum: 74dB Osetljivost: -30dB +/-3dB / 0dB = 1V/Pa, 1kHz Maksimalni izlaz: 120mV Dinamički opseg: 120 dB Dužina kabla: 5’10” (1.8m) Težina: 23g (0.81 oz) Uključeno 1 x Višesmerni lavalier mikrofon sa kablom od 1.8m 1 x Štipaljka za mikrofon 1 x Vetrobran od pene 1 x Vetrobran od krzna 1 x Mekana torbica

Drum Mount Use this convenient clamp to mount and perfectly position a microphone on the rim of your drums. Sennheiser MZH604 Specs Construction Not specified by manufacturer Finish Black

Full metal construction and extensive suspension and shock-mounting minimize handling noise and signal interference. High output performance microphone, offering power, clarity and projection. Metal construction - rugged and reliable Full dynamic range and smooth frequency response - excellent signal quality Shock-mounted capsule - low sensitivity to impact and handling noise Hum compensating coil - reduces electrical interference Neodymium ferrous magnet with boron - keeps mic stable regardless of climate Falcon ring - consistent sound over time Silent on/off switch (reed switch) can be locked in the 'on' position if required Max Input Sound Level (SPL): Greater than 150 dB Sennheiser E845S Specs Microphone Form Factor Handheld Operating Principle Pressure Gradient Capsule Dynamic Polar Pattern Supercardioid On-Board Controls On/Off Performance Frequency Range 40 Hz to 16 kHz Impedance 350 Ohms Connectivity Output Connectors (Analog) 1 x XLR 3-Pin Male Physical Color Black Mounting Mic Clip/Stand Adapter (Included) Included Case Zipper Pouch Dimensions ø: 1.8 x L: 7.3" / ø: 46.1 x L: 185 mm Weight 11.64 oz / 330 g

Condenser clip-on microphone (omnidirectional), waterprotected, for film and theatre applications The TG L55c clip-on microphone is the first choice for television and film, as well as for presentations and theatre applications. The omnidirectional polar pattern of this acoustically balanced lavalier microphone allows a lot of flexibility in positioning – the TG L55c can be worn on a lapel, and it can also be disguised on the face with makeup. It is also water and sweat-proof, and is exceedingly insensitive to pop noises. Available in both black and tan. SCT: - No proximity effect due to omnidirectional polar pattern Technical data Price category Mid-level Transducer type Electret condenser Polar pattern microphone Omnidirectional Microphone frequency response 20 - 20,000 Hz Dimensions Length: 13.0 mm; Shaft diameter: 5.2 mm Net weight without packaging 14 g versions Colour * beige black Downloads SPEC SHEET DAT_TGL55c_EN_A2.pdf (242.74 KB) USER MANUAL MAN_TG-L55c_DE-EN-FR.pdf (196.78 KB) INFO MATERIAL TOURING_GEAR_297x210_E_Screen.pdf (6.78 MB)

All-in-one Drum Pack! Putting mics on a drum kit used to be "hit or miss." Mismatched mics can cause even the best drums to sound too thin or too boomy. And in today's music, the drums are more important than ever in establishing the groove, so why risk disaster when Audix - a world leader in instrument mics - offers up specially designed drum mic packages that deliver a rich, balanced sound. Investing in an Audix DP-5A mic set ensures your drums are heard loud, clear and punchy on stage or in the studio! They're a great resource for any musician or sound engineer who needs a simple, dependable solution to miking percussion. The Audix DP-5A Drum Mic Package Package Includes: One i5 snare mic Two D-2 tom mics One D-4 floor tom mic One D-6 kick drum mic Four D-Vice gooseneck clips Heavy-duty aluminum road case i5 snare mic The i5 is a dynamic microphone that you can use on stage and in the studio. With its sleek styling and unique probe cap design, the i5 features a durable cast zinc alloy body and black E-coat finish. The i5's cardioid polar pattern allows it to focus on the snare while rejecting other instruments or ambient noise. With a smooth and uniform frequency response of 50Hz-16kHz and an ability to handle sound pressure levels in excess of 140dB, the i5 can be used for a wide variety of applications and for all genres of music. D-2 tom mics For bringing out the real, dynamic sound of your drum toms and congas, nothing beats the D-2! The D-2 accurately reproduces the warmth and punch you listen for from percussion, leaving out the muddy, indistinct "boom" that can mar recording. The D-2's natural warmth also makes it a great mic for saxophones and other woodwinds requiring a true, sensitive, yet big, reproduction. D-4 floor tom mic Make sure your low tom has that propulsive kick! The D-4 really puts that extra "oooomph" in your floor tom, kick drum, bass amp, or other low instruments thanks to its flat, linear response. D-6 kick drum mic The D6 cardioid drum mic delivers! A conveniently sized mic with the big sound that drummers want, the D6 is designed to sound good in any position and it is not dependent on finding the "sweet spot" of the drum. The capsule features the same legendary VLM technology that has made Audix D series percussion and instrument microphones very popular for today's live stages and recording studios. Utilizing the same low profile mounting clip as the D series mics, the D6 will work with Audix D-Vice and D-Flex clips. Audix DP-5A Microphone Package Features: Five dynamic mics Up to 144dB SPL Proprietary anti-feedback design Durable scratch resistant spring steel grilles Black hard-coat finish Isolates each instrument's "sweet" spot Gold plated contacts VLM very low mass diaphragm Reduced phase shift Superior transient response Application specific microphones Individually tested and hand assembled Highest levels of gain before feedback Exceptional off-axis rejection Built to last a lifetime Made with pride in the U.S.A.

Designed for recording drums FET preamp with balanced output and low noise Full low-end, smooth midrange, and detailed high-end Compact design makes placement easy Gold-sputtered diaphragm for high-quality tone MXL CUBE Specs Microphone Operating Principle Pressure Gradient Capsule Condenser Polar Pattern Cardioid Performance Frequency Range 20 Hz to 20 kHz Maximum SPL 132 dB SPL Impedance 100 Ohms Sensitivity 20 mV/Pa Signal-to-Noise Ratio 80 dB A-Weighted Equivalent Noise Level 14 dB A-Weighted THD 0.5% Connectivity Output Connectors (Analog) 1 x XLR 3-Pin Power Operating Voltage 48 V ± 4 V Physical Dimensions ø: 2.01 x L: 4.02" / ø: 51 x L: 102 mm Weight 0.85 lb / 385.55 g