Garancija: 12 meseci

Omnidirectional Polar Pattern The omnidirectional polar pattern picks up audio accurately without pointing the microphone directly at the talker Rugged Construction The MD 42 features a durable metal housing and shock-mounted capsule for maximum protection against the rigorous use on the road Sound Inlet Basket Protective sound-inlet basket lines the metal capsule and protects against wind noise Sennheiser MD 42 Specs Microphone Capsule Dynamic Polar Pattern Omnidirectional High-Pass Filter None Performance Frequency Range 40 Hz to 18 kHz Impedance 350 Ohms Connectivity Output Connectors (Analog) 1 x XLR 3-Pin Male Physical Dimensions ø: 1.9 x L: 9.8" / ø: 48.3 x L: 248.9 mm Weight 12 oz / 340 g

The miniature capsule remains out of sight during performances and the flexible gooseneck allows for easy positioning. The mounting clamp features dampening materials to eliminate extraneous vibration, impact, and handling noise. The e 908 B features a locking miniature 3.5mm connector for use with EW series beltpack transmitters; however, the MZA 900 P cylindrical preamplifier is included and terminates to a standard 3-pin XLR connection, for direct connection to PA systems, consoles, and recording devices. Wired or Wireless Operation The e 908 B features a 3.5mm locking mini connection for EW series beltpack transmitters; the included MZA 900 P preamplifier features a 3-pin XLR connector for direct integration with mixer consoles, pre-amplifiers, and recording devices. Low-Frequency Roll-Off Switchable low-frequency roll-off filter is available on the MZA 900 P. The roll-off eliminates noise and hum below 125 Hz. 12 dB Pad Switch The 12 dB pad switch is also located on the MZA 900 P. The Pad provides added headroom and minimizes distortion when capturing audio at excessive levels. Cardioid Polar Pattern The cardioid polar pattern provides an even frequency response and excellent directivity. Gooseneck Mount The capsule rests on a flexible gooseneck for easy microphone positioning. Clamp Dampening The sturdy clamp features dampening materials for reducing vibration and handling noise. Sennheiser E 908 B Specs Microphone Form Factor Instrument Mount Sound Field Mono Capsule Condenser Polar Pattern Cardioid Orientation End Address Pad None High-Pass Filter None Tone Adjustment None Indicators None On-Board Controls None Windscreen Foam (Included) Performance Frequency Range 40 Hz to 20 kHz Impedance 100 Ohms Load Impedance 2 Kilohms Sensitivity 4 mV/Pa Output Level 30 dB Connectivity Output Connectors (Analog) 1 x 1/8" / 3.5 mm TRS Male (Locking, on Attached Cable) Cable Length 7.22' / 2.2 m Cable Diameter 0.003" / 0.08 mm Power Operating Voltage 12 to 48 V (Phantom Power) Operating Current Consumption 3 mA (Phantom Power) Physical Color Black Mounting Instrument Clamp (Included) Dimensions ø: 1.85 x L: 7.6" / ø: 47 x L: 193 mm Weight 4.94 oz / 140 g

With the included mounting hardware and the ability to run off a simple 3.5mm connection, the EM-93M couldn't be easier to set up. Separate cables with TRS and TRRS jacks are provided for connecting to DSLRs and mobile devices respectively, and the mic also comes complete with foam and furry windscreens for eliminating unwanted wind noises. Ready to Go, Right out of the Box The EM-93M is ready to start creating content right away, with no messy batteries and full plug-and-play compatibility with any DSLR cameras or smartphones that possess an audio input. Just unpack the camera, hook up the appropriate cable and jack to your device, and start recording crystal clear audio immediately. Includes convenient shockmount and camera shoe adapter for noise-free recording while mounted onto most cameras Incredibly lightweight at well under a pound Comes with furry windscreen for blocking wind noise and foam windscreen for indoor or general use Includes 3.5mm TRS and TRRS cables for DSLRs and phones 3.5mm TRS jack (black) for DSLRs, 3.5mm TRRS jack (green) for phones Mackie EM-93M Specs Microphone Primary Applications Web-Streaming, Recording to Mobile Device, ENG (Electronic News Gathering), Audio for Video, Location Sound, Field Recording Form Factor Camera-Mount / Mobile Device Mic Intended Sound Sources Vocals, Speech/Voice Over, Room Ambiance Sound Field Mono Operating Principle Pressure Gradient Capsule 1 x Condenser Polar Pattern Cardioid Orientation End Address Circuitry Solid-State Pad None High-Pass Filter None Tone Adjustment None Gain Adjustment None On-Board Controls None Windscreen Cotton (Included) Foam (Included) Performance Frequency Range 35 Hz to 20 kHz Impedance 680 Ohms Sensitivity -42 dB Signal-to-Noise Ratio 68 dB Connectivity Output Connectors (Analog) 1 x 1/8" / 3.5 mm TRS Female (on Mic) 1 x 1/8" / 3.5 mm TRS Male (on Detachable Cable) 1 x 1/8" / 3.5 mm TRRS Male (on Detachable Cable) Headphone Connector None Power Operating Voltage Not Specified by Manufacturer Physical Color Black Mounting Camera/Shoe-Mount (Included) Mounting Thread Size Included Mount Has No Threading Included Case None Included Filters None Certifications WEEE, ICES-003 (B), FCC Part 15 *as per Manufacturer Dimensions H: 3.1 x W: 0.9" / H: 7.9 x W: 2.3 cm Weight 1.4 oz / 40 g

The Sennheiser ASA 1 Active Antenna Splitter is a rack mountable antenna splitter that allows for up to 4 EW receivers to share one pair of antennas without signal attenuation. If desired, 2 splitters can be linked to create an 8-channel system. This unit requires a NT 1-1 plug-in adapter (sold separately) for operation. Rack mountable Transmitters receive power via BNC cables eliminating the need for separate power supplies Two ASA 1 Splitters can be linked together to create an 8-channel diversity system

The OM6 is a dynamic vocal microphone used for live performances, studio and broadcast applications. The OM6 touts a broad frequency response, full-bodied and articulate sound reproduction, resistance to feedback and ability to handle high SPLs in excess of 144 dB without distortion. The OM6 has a tight and uniformly controlled hypercardioid polar pattern which helps isolate vocals. Designed with condenser-like qualities, the OM6 has a smooth, rising response between 2kHz -10kHz along with a flat, fully extended bass response from 60 Hz - 1 kHz. This, in conjunction with an extremely tailored mid-range, makes the OM6 an excellent choice for broadcast and live recording. Designed, assembled and tested by Audix in the USA.

Description With the TG MM1w, the TG 1000 digital wireless system presents an all-in-one solution. The wireless system can now be used not only to mike speaking and singing voices and musical instruments, but also to calibrate ELA and PA systems in the theatre, at live concerts or at festivals. Due to the linear frequency response of TG 1000 the TG MM1w behaves in the same way as the wired version MM1. The interchangeable microphone capsule can be easily fitted on the TG 1000 handheld transmitter and makes it possible to calibrate simply, without needing to lay meters of cable. Each microphone is supplied with a printout of an individually measured 0¬∞ frequency response curve. The measured data can be requested by sending the serial number of the microphone head to [email protected]. Features: Omnidirectional polar pattern linear frequency response Compact and robust housing Made in Germany Specifications: Transducer type . . . . . . . . . . . . . . . Condenser (back electret) Operating principle . . . . . . . . . . . . Pressure Frequency response . . . . . . . . . . . . 30 - 20,000 Hz Polar pattern . . . . . . . . . . . . . . . . . Omnidirectional, diffuse field equalised Open circuit voltage at f = 1 kHz . . . . . . 15 mV/Pa (= -36.5 dBV) ¬± 1 dB* Sound pressure level . . . . . . . . . . . 120 dB* S/N ratio rel. to 1 Pa. . . . . . . . . . . . 56 dB* A-weighted equivalent SPL . . . . . . 27 dB Dimensions Head diameter. . . . . . . . . . . . . . . . 9 mm Shaft diameter. . . . . . . . . . . . . . . . 36 mm Length. . . . . . . . . . . . . . . . . . . . . . 94 mm Weight . . . . . . . . . . . . . . . . . . . . . 96 g

Perfect for Snare drums and acoustic guitars Thanks to the microphone’s good transient response, the attack of a snare drum or hitting the string of an acoustic guitar is transferred in a delicate way, while the microphone skilfully captures and reproduces the sound of the instrument. A performance unheard of The M 201 is equipped in the best possible way to successfully deal with noise suppression and feedback with the help of its hypercardioid features and compensation coil. Crosstalk is also eliminated to the greatest degree possible. Application Ideal for electric guitar amps, acoustic guitar, snare and wind instruments. Polar Pattern Hypercardioid Transducer Type Dynamic

Garancija: 12 meseci

Garancija: 12 meseci

Garancija: 12 meseci

PRA20 TQG Headworn Dynamic Microphone The PRA20 is a head-worn dynamic microphone with no proximity effect when used in close miking applications, avoiding those unwanted "pop" sounds. These microphones have a light-weight, comfortable steel wire design and a tailored vocal frequency response that increases the intelligibility of speech. The PRA20 does not require phantom power and is especially suitable for all vocal miking. PRA20TQG TA4F connector for wireless Features Strong and flexible gooseneck allows precise placement of microphone to capture the perfect sound No proximity effect, excellent wearing comfort Smooth, natural sound PRA20, PRA20TQG are for wireless systems Application Speeches Presentations Conferences Type: Dynamic Polar Pattern: Cardioid Frequency Response: 50-15,000 Hz Sensitivity -64 dBV/Pa (0.6 mV) Output Impedance: 200 Ω Minimun Load Impedance: 1,000 Max.SPL: 136 dB SPL Finish: Black Connector: PRA20: 3.5 mm TRS;PRA20TQG:TA4F for wirless system;PRA20XLR:XLR3M 1.5-meter cable Dimensions Width: 155 mm (6.1");Gooseneck: 120 mm (4.72");Microphone: Ø16 mm (Ø0.63") Net Weight: Microphone: 65 g (2.3 oz) Accessories Furnished: S11 windscreen, belt clamp Packaging: Colorful outer packaging

Built to withstand the rigors of live stage applications, the Fusion Series mics are also excellent for rehearsal, school, House of Worship and a wide variety of home recording applications. Applications - All-in-one solution for drum miking - Instrument-specific mics for optimal results - Cost-effective - Rugged Audix quality - Aluminum carrying case

Audix DP4 Microphone Pack Microphone Kit at a Glance: D6 for kick drum i5 for snare and toms D6 for kick drum The D6 has a frequency response of 30Hz-15kHz and is characterized with a cardioid pick-up pattern. The D6 is designed to sound good in any position and it is not dependent on finding the "sweet spot" of the drum. The D6 capsule features the same legendary VLM technology that has made the D series percussion and instrument microphones very popular for today's live stages and recording studios. i5 for snare and toms The i5's cardioid polar pattern allows it to focus on the specific instrument that is being miked while rejecting other instruments or ambient noise on stage. With a smooth and uniform frequency response of 50Hz-16kHz and an ability to handle sound pressure levels in excess of 140dB, the i5 can be used for a wide variety of applications and for all genres of music. Audix DP4 Microphone Pack Microphone Kit Features: A complete kit for miking drums The DP4 Microphone Pack includes: One D6 Kick Drum mic Three i5 Snare/Tom mics Satisfy your drum mic needs with the Audix DP4 Microphone Pack!

Garancija: 12 meseci

Garancija: 12 meseci

The Saramonic SmartMic+ UC is an ultra-lightweight and compact microphone that plugs directly into the USB-C port on Android smartphones and tablets and vastly improves the sound quality of the videos you shoot and the audio you capture. The directional pickup pattern excels at focusing on the sounds in front of it, while rejecting sounds to the sides and rear. Producing audio that is intelligible and clear, even in busy environments. Using SmartMic+ UC couldn’t be easier. You simply plug it into your mobile device and start creating. There are no batteries to install or charge, and there are no levels to set. It’s truly plug-and-play. A gold-plated headphone jack on the back enables you to easily listen to your audio without needing to remove the SmartMic+ UC. You can also listen to the sound as you record, but this capability needs to be supported by the app you’re using. A snug-fitting foam windscreen is included that won’t accidentally fall off when in use or transit. When you need to use SmartMic+ UC in windy environments, a sensibly sized furry windscreen is also included that can be pulled over the foam windscreen for ultimate protection from wind noise. SmartMic+ UC can be positioned both facing forward, when using the selfie camera on your Android device or facing outward, when taking advantage of your device’s high-end camera. It captures audio that is rich and detailed, but the unit itself is ultra-compact, small enough to fit in your pocket and weighs only 40 grams, so you can easily bring it with you everywhere you go. The SmartMic+ UC is also rugged, made with durable metal, so you can rest assured that it’s well equipped for your adventures. Provides broadcast-quality sound to Android smartphones and tablets that have USB-C ports when shooting video, recording audio, live-streaming, vlogging, podcasting and more Lightweight and ultra-portable yet rugged, durable metal microphone that provides simple plug-and-play usage, never requires batteries or charging 1/8” (3.5mm) Headphone jack for real-time monitoring while making recordings (app dependent) and listening to playback without removing microphone Directional pickup pattern clearly captures sounds in front of the mic while rejecting sounds to the sides and rear and can be positioned facing forward when using the selfie camera, or facing outward Includes both a snug-fitting foam windscreen for indoor use and a sensibly sized furry wind protector for outdoor use Microphone Type: Directional Condenser Polar Pattern: Cardioid Outputs: 1 x 1/8“ (3.5 mm) headphone jack Connectivity: 1 x USB Type-C male connector Frequency Response: 75Hz to 20kHz Sensitivity: -35 ±3dB (0dB=1V/Pa at 1KHz) Maximum Input SPL: f=1kHz, THD<5% (105 dB) Output Impedance: 600 Ohm Signal to Noise Ratio: 75 dB SPL Dimensions: 2.8 x 1 x 1.9” (71.6 x 25.5 x 48.8 mm) Weight: 1.41 oz (40 g) 1 x SmartMic+ UC 1 x Foam windscreen 1 x Furry high-wind windscreen 1 x Warranty card

FEATURES 16 Selectable UHF Channels 2×16 Selectable UHF Channels Digital and analog technology IR for matching receiver and transmitter Reliable performance in multiple purpose Handheld transmitter rechargeable (optional) Apply powerful anti-interference technology SPECIFICATION Receiver Frequency Range: 500-980MHz Channels: 16 Channels Modulation Model: FM SNR: 90db Sensitivity: -90dbm Frequency response: 40~17KHz Channel interval: 600ohm T.H.D: 1% Output impendance: 600ohm Power Supply: 5V Power Consumption: <300mA Handheld transmiter Power output: 10dBm Frequency response: 40kHz~17KHz Power supply (Normal battery): 3V Power supply (Lithium battery): 4.2V Body pack transmiter Power output: 10dBm Frequency response: 40kHz~16KHz Power supply: 3V

Garancija: 12 meseci

Ultra-light headstrap microphone (56 g) This version, fitted with a battery support, can be connected directly to a mixing console (mono Jack 6,3 mm) Type: Electret Polar Pattern Unidirectional Freq. Response: 100 Hz - 16 kHz Sensitivity: -67 dB Impedance: Low impedance Operat. Voltage: 1,5V

Garancija: 12 meseci

Garancija: 12 meseci

Garancija: 12 meseci

Garancija: 12 meseci

Garancija: 12 meseci