The CCM382 has been specifically designed to cope with more demanding, high humidity environments, such as a shower room or indoor swimming pool, which are unsuited to some of the advanced materials we have employed. Whereas its cost effectiveness may lead it to being described as entry level, the CCM382 also provides a point of entry to areas of the home that were previously off-limits for high-quality installation loudspeakers. The B&W CCM382 is a two-way ceiling loudspeaker, balanced for wide-angle listening and features an elegant minimal-width border design. Each CCM382 speaker includes one 8" Polypropylene cone bass/midrange driver and a 1" soft dome tweeter. The B&W CCM382 speakers have also been specifically designed to cope with more demanding environments and can be used in places where other high-quality speakers struggle because of excess moisture. This makes them ideal for areas of high humidity, such as an indoor swimming pool or shower room. Model CCM382 Description 2-way in-ceiling system Drive units 1x 200mm (8in) Polypropylene cone bass/midrange 1x 25mm (1in) soft dome tweeter Frequency Range (-6dB) 45Hz - 30kHz Sensitivity SPL (2.83V, 1m) 90dB Impedance Nominal (min) 8Ω (5.0Ω) Power Handling 80W Pre-mount Kit PMK C8 Back Box BB 6C Frame Diameter 290mm (11.4 in) Cut-out diameter 253mm (9.9in) Depth behind surface 85mm (3.4in) Protrusion 4mm (0.2in)

Features: Dual 5.25-inch (133mm) polycellulose low-frequency woofers New HDI (High Definition Imaging) waveguide 1 inch (25 mm) aluminum dome tweeter Technical specifications: 2-way dual 5.25" woofer, 1" aluminum tweeter center speaker Dual 5.25" (133 mm) polycellulose low frequency woofers New HDI (High Definition Imaging) waveguide. 1” (25mm) aluminum dome tweeter Recommended amplifier power: 20 – 150W Frequency Response: 75Hz - 40kHz Sensitivity: 88dB at 1M, 2.83V Nennimpedanz: 6 Ohm Crossover frequencies: 2.6 kHz Case Type: Sealed Abmessungen (B x T x H): 469 x 220 x 190 mm Weight: 7.95kg

Features: 12 inch (305mm) polycellulose low frequency woofer Two tone unique design for wood Technical specifications: 12" 500 Watt aktiver Subwoofer 12" (305 mm) polycellulose low frequency woofer Power: 250 W RMS (500 W dynamic) Frequency Response: 32Hz - 150Hz Crossover Frequencies: 50 Hz - 150 Hz (variable) 24 dB/octave Controls: Auto Power, Crossover, Level, Phase Input: 1 x line level LFE input Housing type: Bass reflex via rear-firing tuned ports Power Requirements: 120V, 60Hz (US) 220-230V, 50/60Hz (EU) Power consumption (idle/full/power): Abmessungen (B x T x H): 370 x 420 x 395 mm Weight: 18.64kg

Features: 5.25 inch (133 mm) polycellulose low frequency woofer New HDI (High Definition Imaging) waveguide 1 inch (25 mm) aluminum dome tweeter Technical specifications: 2-way bookshelf speaker with 5.25" woofer and 1" aluminum tweeter 5.25" (133 mm) polycellulose low frequency woofer New HDI (High Definition Imaging) waveguide. 1” (25mm) aluminum dome tweeter Recommended amplifier power: 20 – 125W Frequency Response: 55Hz - 40kHz Sensitivity: 86dB at 1M, 2.83V Nennimpedanz: 6 Ohm Crossover frequencies: 3.2 kHz Enclosure Type: Bass Reflex via Rear-Firing Tuned Port Abmessungen (B x T x H): 190 x 230 x 321 mm Weight (each): 5.45 kg

Features: 2 x 6.5 inch (165 mm) polycellulose low frequency woofers New HDI (High Definition Imaging) waveguide 1 inch (25 mm) aluminum dome tweeter Technical specifications: 2.5-way floorstanding speaker with dual 6.5" x 1" aluminum tweeters 2 x 6.5" (165 mm) polycellulose low frequency woofers New HDI (High Definition Imaging) waveguide. 1” (25mm) aluminum dome tweeter Recommended amplifier power: 20 – 225W Frequency Response: 40Hz - 40kHz Sensitivity: 90dB at 1M, 2.83V Nennimpedanz: 6 Ohm Crossover Frequencies: 1.4kHz, 2.0kHz Enclosure Type: Bass Reflex via Rear-Firing Tuned Port Abmessungen (B x T x H): 230 x 295 x 1000 mm Weight: 17.25kg

Features: 6 x 3 inch (76mm) polycellulose low frequency woofer New HDI (High Definition Imaging) waveguide 1 inch (25 mm) aluminum dome tweeter Technical specifications: 2-way, 6 x 3" woofer, 1" aluminum tweeter center speaker 6 x 3" (76 mm) polycellulose low frequency woofer New HDI (High Definition Imaging) waveguide. 1” (25mm) aluminum dome tweeter Recommended amplifier power: 20 – 150W Frequency Response: 75Hz - 40kHz Sensitivity: 90dB at 1M, 2.83V Nennimpedanz: 6 Ohm Crossover frequencies: 2.5 kHz Enclosure Type: Bass Reflex via Rear-Firing Tuned Port Abmessungen (B x T x H): 745 x 166 x 104 mm Weight: 7.45kg

Features: 10 inch (250mm) polycellulose low frequency woofer Two tone unique design for wood Technical specifications: Active 10" subwoofer with 300 watts 10" (250 mm) polycellulose low frequency woofer Power: 150 W RMS (300 W dynamic) Frequency Response: 35Hz - 150Hz Crossover Frequencies: 50 Hz - 150 Hz (variable) 24 dB/octave Controls: Auto Power, Crossover, Level, Phase Input: One (1) line level LFE input Housing type: Bass reflex via rear-firing tuned ports Power Requirements: 120V, 60Hz (US) 220-230V, 50/60Hz (EU) Abmessungen (B x T x H): 335 x 380 x 340 mm Weight: 13.63 kg

The 4329P is a completely self-contained amplified loudspeaker system featuring high-resolution streaming audio and prosumer connectivity. Patented JBL acoustic technologies render sound with incredible accuracy and powerful dynamics, while extensive wired and wireless connectivity opens up a world of possibilities for the music lover. Patented JBL Driver Technologies: 2409H / 1-inch (25mm) Compression Driver with High-Definition Imaging™ Horn 600W Total RMS System Power Wireless Streaming Audio via Chromecast, AirPlay 2, and Bluetooth J W 2 0 0 P - 4 / 8 - I N C H ( 2 0 0 M M ) P U R E - P U L P B L A C K PA P E R C O N E W O O F E R S W I T H C A S T - F R A M E S 2 4 - B I T / 1 9 2 K H Z H I G H - R E S O L U T I O N D A C E X T E N S I V E D I G I TA L A N D A N A L O G C O N N E C T I V I T Y Description 4329P Studio Monitor Powered Loudspeaker System The JBL 4329P Studio Monitor Powered Loudspeaker is a completely self-contained amplified loudspeaker system featuring high-resolution streaming audio and prosumer connectivity. Patented JBL acoustic technologies render sound with incredible accuracy and powerful dynamics, while extensive wired and wireless connectivity opens up a world of possibilities for the music lover. Each speaker is powered by a 300-watt amplifier, delivering 250 watts of power to the woofer and 50 watts of power to the compression driver. Both accurately controlled by sophisticated DSP processing assuring each driver blends seamlessly creating a dynamic and immersive listening experience. The integrated streaming engine provides both wired and wireless network audio capabilities via Google Chromecast built-in, Apple AirPlay 2, and Bluetooth 5.3 aptX Adaptive audio. A 24-bit/192kHz high-resolution DAC ensures your favorite music comes across with the highest fidelity. In addition to premium wireless audio, the 4329P provides extensive connections for analog and digital physical sources including a professional-grade combination XLR / ¼-inch TRS phono inputs for use with balanced or unbalanced signals. Type Bass-reflex Loudspeaker System with Built-in Amplification, DSP, and Wireless Connectivity Low Frequency Drivers JW200P-4, 8-inch (200mm) Pure-pulp Black Paper Cone Woofers with Cast-frames High Frequency Drivers 2409H, 1-inch (25mm) Annular Ring, Teonex® Diaphragm Compression Drivers with Advanced HDI™ Geometry Horns Amplifier Power 600W Class D System Power, 300W RMS per Speaker (50W per HF Compression Driver + 250W per LF Woofer) Audio Resolution Up to 24-bit, 192 kHz (Digital Link connection between spks) Audio Resolution Up to 24-bit, 96 kHz (Wireless connection between spks) Frequency Response 28 Hz - 25 kHz (-6 dB) Crossover Frequency 1,675 Hz Dispersion 90° Horizontal x 60° Vertical (2kHz to 15kHz) Sound Controls Front Panel Wireless Inputs WiFi streaming, Bluetooth 5.3 Wired Inputs (Analog) XLR/¼" Combo and 3.5mm stereo Wired Inputs (Digital) Asynchronous USB-B and Toslink/Optical Supported Digital Audio Sample Rates (PCM 2CH) Streaming & Local Media - 32kHz/44.1kHz/48kHz/88.2kHz/96kHz/176.4kHz/192kHz SPDIF - Up to 192kHz USB-B - PCM 2-channel, up to 192kHz Bluetooth - Up to 48kHz, aptX Adaptive up to 96kHz Music Formats Supported (Local Media) AAC / AIFF / ALAC / DSD64 (to PCM) / FLAC / MP3 / MP4 / MQA / OGG / WAV / WMA Subwoofer Output Autosensing w/ Auto-engage of 80Hz High Pass Filter Remote Control Type BTLE Wireless Bluetooth Audio Version 5.3 Bluetooth Audio Profiles SPP (Serial Port Profile), A2DP (Advanced Audio Distribution Profile), AVRCP (Audio/Vido Remote Control Profile) Enclosure Bass-reflex Design with Dual Front-facing Ports, ¾" MDF Finished in Satin Walnut or Black Walnut Furniture-Grade Wood Veneer Grille Dark Blue (with Walnut Cabinet) or Black (with Black Cabinet) Acoustically Transparent Cloth Grille Net Speaker Dimensions with grille 20.3” H x12.6” W x 12.7” D (515.5mm x 320mm x 322.4mm) Net Speaker Weight Primary - 34.5 lbs (15.7kg), Secondary - 34.3 lbs (15.6kg) Shipping Units of Measure System Pairs Gross Shipping Dimensions 25.59” H x 30.31” W x 16.46” D (650mm x770mm x 418mm) Gross Shipping Weight 79.4 lbs (36.1 kg) AC Input Voltage 100 - 240 VAC (+/-10%), 50/60Hz

Osnovne karakteristike Tip snage: RMS Snaga zvučnika: 6W Tip: Aktivni Sistem: 1.0 Sateliti Tip povezivosti: Bluetooth™ Povezivost: Bežični Ulazni priključci 3.5mm: 1 Ostalo Napomena: Za reprodukciju muzike potreban je uređaj koji podržava A2DP (Advanced Audio Distribution Profile) Bluetooth™ profil, Za reprodukciju telefonskih poziva potreban je uređaj koji podržava HFP 1.6 (Hands-Free Profile) Bluetooth™ profil Baterija: Do 13h rada, Litijum-jonska Podržane tehnologije: True Wireless Stereo (TWS) Fizičke karakteristike Boja: Siva Ostalo: IP67 standard Masa: 0.23kg Pakovanje: Kabl 3.5mm audio, Kabl USB Micro-B za punjenje Dimenzije: 101mm x 101mm x 44mm Reklamacioni period Reklamacioni period: 24 meseca Osnovne karakteristike Tip snage: RMS Sistem: 1.0 Tip: Aktivni Snaga zvučnika: 6W Sateliti Tip povezivosti: Bluetooth™ Povezivost: Bežični Ulazni priključci 3.5mm: 1 Ostalo Napomena: Za reprodukciju muzike potreban je uređaj koji podržava A2DP (Advanced Audio Distribution Profile) Bluetooth™ profil, Za reprodukciju telefonskih poziva potreban je uređaj koji podržava HFP 1.6 (Hands-Free Profile) Bluetooth™ profil Baterija: Do 13h rada, Litijum-jonska Podržane tehnologije: True Wireless Stereo (TWS) Fizičke karakteristike Pakovanje: Kabl 3.5mm audio, Kabl USB Micro-B za punjenje Dimenzije: 101mm x 101mm x 44mm Ostalo: IP67 standard Boja: Siva Masa: 0.23kg Reklamacioni period Reklamacioni period: 24 meseca Neophodni kolačići pomažu da sajt bude upotrebljiv omogućavajući osnovne funkcije kao što su navigacija na stranici i pristup bezbednim oblastima web sajta. Web sajt ne može da funkcioniše pravilno bez ovih kolačića. Trajne kolačiće koristimo za olakšanu funkcionalnost prijave korisnika, kao što je “Ostanite prijavljeni”. Takođe koristimo trajne kolačiće da bismo bolje razumeli navike korisnika, te kako bismo poboljšali web stranicu prema vašim navikama. Statistički kolačići pomažu vlasnicima web sajta da razumeju interakciju posetilaca sa web sajtom anonimnim sakupljanjem informacija i izveštavanjem. Marketing kolačići se koriste za praćenje posetioca na web sajtovima. Namera je da se prikažu reklame koje su relevantne i privlačne za pojedinačnog korisnika a time i od veće vrednosti za izdavače i treće strane oglašivače.

ESB 2.1 Sistem Zvučnika CDX Super Stage One Snage 2x60 RMSa, na 6 oma Visina 30 Sirina 22 woofer (sateliti 12) Dubina 34 woofer (sateliti 21) Italijani i te kako umeju da naprave hi-fi... Rekao bih visoka klasa 2.1 sistema.. Sa ne baš niskim cenama.. Bilo da je u pitanju novo, ili polovno Ali svakako ćete to sve proveriti na interentu. Pretpostavljam da Vam je i brend kao brend nepoznanica... Fantastično svira. Ovako kada se pozicionira, i poveže u paralelnu vezu (A+B na pojačalu) izuzetan zvučni utisak. Možete naravno ići i na rednu vezu (podizanje otpornosti) Sa moje strane svakako preporuke za one koji hoće malo ozbiljniji 2.1 sistem. Ako ne.., imate vazda Bose-a, JBL-a, i sličnih gluposti u ovakvoj izvedbi Estetski.. Klavir lak je u pitanju, pa je teško slikati.. Postoje površinske ogrebotine na par mesta, za moja shvatanja dobro očuvan komplet (uz opisane ogrebotine). Ali naravno.., ako ste esteta.. Komotno preskičite oglas, i isti potražite u prodavnici

Product description: The Stage A190 is the flagship of the JBL Stage Series and was designed and engineered at JBL's world-renowned acoustic engineering facility in Northridge, California. This floorstanding speaker features a 2½-way design with patented High-Definition Imaging (HDI™) waveguide geometry, 1" (25mm) aluminum dome tweeter and dual 8" (200mm) polycellulose cone woofers designed for deep, characteristic JBL provide bass. Features: 2 x 8" (203 mm) polycellulose low frequency woofers New HDI (High Definition Imaging) waveguide. 1 inch (25 mm) aluminum dome tweeter Technical specifications: 2.5-way, dual 8", 1" aluminum tweeter floorstanding speaker 2 x 8" (203 mm) polycellulose low frequency woofers New HDI (High Definition Imaging) waveguide. 1” (25mm) aluminum dome tweeter Recommended amplifier power: 20 – 225W Frequency Response: 36Hz - 40kHz Sensitivity: 91dB at 1M, 2.83V Nennimpedanz: 6 Ohm Crossover Frequencies: 1.4kHz, 2.0kHz Enclosure Type: Bass Reflex via Rear-Firing Tuned Port Abmessungen (B x T x H): 260 x 370 x 1070 mm Weight: 22.56kg

Product description: The Stage A170 is the most compact floorstanding speaker in the JBL Stage Series, designed and engineered at JBL's world-renowned acoustics engineering facility in Northridge, California. The narrow footprint features a 2½-way design with patented High-Definition Imaging (HDI™) waveguide geometry, 1" (25mm) aluminum dome tweeter and dual 8" (200mm) polycellulose cone woofers for the characteristic JBL bass. Features: 2 x 5.25 inch (133 mm) polycellulose low frequency woofers New HDI (High Definition Imaging) waveguide 1 inch (25 mm) aluminum dome tweeter Technical specifications: 2.5 way, dual 5.25", 1" aluminum tweeter floorstanding speaker 2 x 5.25" (133 mm) polycellulose low frequency woofers New HDI (High Definition Imaging) waveguide. 1” (25mm) aluminum dome tweeter Recommended amplifier power: 20 - 200 W Frequency Response: 44Hz - 40kHz Sensitivity: 89dB at 1M, 2.83V Nennimpedanz: 6 Ohm Crossover frequencies: 1.8kHz, 2.8kHz Enclosure Type: Bass Reflex via Rear-Firing Tuned Port Abmessungen (B x T x H): 190 x 255 x 930 mm Weight: 14.34kg

YAMAHA Dvosistemske Bassreflex Bookshelf Zvučne Kutije NS-G 20 Snage 2x50/70 wati, na 4 oma Visina 27 Sirina 18 Dubina 19 Najmanji, a ujedno i najlepši i najzgodniji model u ovoj seriji. Konstrukcija sa mid/bass drajverom 13cm, kalotnim visokotoncem, i otvorom za bassreflex sa prednje strane. Jako lepo sviraju, veoma transparentno i realno. Iako najmanje u seriji, kažu da su zvučno najbolje u pravo zbog neofarbanog zvuka. Svakako popularan, i tražen model u komercijalnoj klasi. Estetski nemam neke veće primedbe, nemaju nikakve ogrebotine koje bodu oči, jedino što bih mogao da zabeležim kao estetsku manu su po tri ili četiri malene rupice (verovatno od nosača za zid) na ledjima obe kutije. U svakom slučaju za svoje godine dobro očuvane. Allgemein Hersteller: Yamaha Modell: NS-G 20 Baujahre: 1993 Hergestellt in: Farbe: Schwarz Abmessungen: 180 x 270 x 187 mm (B x H x T) Gewicht: 3,7 kg Neupreis ca.: 398,- (UVP Paar) Technische Daten Bauart: 2-Wege Bassreflex Kompaktlautsprecher Chassis: Tiefton: 125 mm Hochton: 30 mm Kalotte Belastbarkeit (Nenn-/Musikb.): 50/70 Watt Wirkungsgrad: 86 dB Frequenzgang: 70 - 20.000 Hz Übergangsbereiche: 3.300 Hz Impedanz: 4 Ohm

100W A/B amplifier powers up the 12 inches long-throw, high excursion woofer to produce impressive bass sound which is as low as 24Hz Built-in controls for volume, variable crossover (80-160Hz) and phase polarity (0/180) help to achieve integrity with in-room speakers, thereby delivering the best sound possible Rigid MDF cabinet encasement with a removable, precision-fit grille reduces the resonance to give out loud and clear bass with minimal distortion Designed as the upgraded version of the critically acclaimed Monitor series with latest features and excellent speakers Compatibility with the latest Dolby Atmos & DTS:X enabled AV receivers and amplifiers intensifies the theatre effect in your room Line level (RCA), LFE (unfiltered / low pass disabled) and nickel plated, 5-way binding post inputs offer multiple connection options with other devices for a more realistic experience Continuous Power Handling 100W Width 16" (40.7 cm) Height 16.4" (41.8 cm) Depth 17.9" (45.6 cm) Weight 39 lbs (17.7 kg) Speaker Left/right 5-way binding posts Color Black (vinyl) Feet Permantly installed feet LFE Single RCA Line Level Yes Transducers 12" bi-laminate paper (foam surround) Bass Type Bass reflex (ported) Low-Pass Crossover Frequency 80 Hz → 160 Hz Phase Adjustment 0/180 Amplifier Type Class AB Continuous Power 50W Peak Power 100W

Highly capable in a hi-fi or home theatre set-up Fill the room with bass, not speakers ASW610 is compact, making it a subwoofer you can squeeze in anywhere. Or maybe use two for more bass control? Sealed tight ASW610's sealed enclosure keeps the bass good and tight (and exciting!). Size & weight Dimensions Height: 310mm (12.2 in) not including feet or spikes 322mm (12.7in) including feet 338mm (13.3in) including spikes Width: 310mm (12.2 in) Depth: 347mm (13.66in) not including grilles 375mm (14.8 in) including grilles and controls Net weight 12.5kg (27.6 lb) Technical details Technical features Input level (line in) Input level (speaker in) Low-pass filter frequency (line in only) Low-pass filter bypass Bass extension Bass roll-off alignment Auto sense on / standby Phase switch Description Active closed-box subwoofer system Drive units ø250mm (10 in) Paper / Aramid fibre cone long-throw Frequency range -6dB at 20Hz and 25 / 140Hz adjustable (EQ at A) Frequency response ±3dB 27Hz – 40 / 140Hz adjustable (EQ at A) Bass extension -6dB at 20Hz (position A) -6dB at 25Hz (position B) -6dB at 30Hz (position C) Amplifier power output 200W Power consumption 40W / 0.5W standby Input impedance 33kΩ Signal / Noise >90dB Inputs Line in (RCA Phono) Speaker in (Binding post) 12v trigger (3.5mm jack) Low-pass filter Active 4th-order, variable cut-off frequency

YAMAHA Dvosistemske Bookshelf Bassreflex Zvučne Kutije NX-E 800 Snage 2x60/110 wati, na 6 oma Visina 30 Sirina 19 Dubina 23 Najveći model u seriji, uslovno rečeno najveći.., jer su u ovoj seriji svi sličnih dimenzija. Najveći je u smislu najviše oznake, i bile su u sastavu tada najskupljeg Yamaha micro sistema. Naravno postojala je opcija kupovine i zasebno, kao nezavisnih zvučnih kutija. Konstrukcija sa mid/bass drajverom, kalotnim visokotoncem, i otvorom za bassreflex na ledjima kabineta. Crni klavir lak, šraf konekcija za zvučničke kablove, sve u svemu lep i kvalitetan model, sa odličnim zvukom za ovaj cenovni rang. Razlog što su jeftine, ili da budem precizniji prejeftine je estetske prirode. Tačnije, nedostaju zaštitne ukrasne mrežice, i kutija sa leve strane u gornjem desnom ćošku ima blago nagnječenje. U suštini to bi bilo to po pitanju estetike. Allgemein: Hersteller: Yamaha Modell: NX-E 800 (Pianocraft 410+810) Baujahre: 2006–2010 Hergestellt in: Indonesien Farbe: Klavierlack schwarz oder Kirsche hell/silber Abmessungen: 18,6 cm × 30 cm × 22,3 cm (B × H × T) Gewicht: 4,3 kg Neupreis ca.: vereinzelt Retailverkauf 100–180 € Technische Daten: System: 2-Wege-Bassreflex, Kompaktbox magnetische Abschirmung Chassis: 2 Hochtöner: Kalotte 2,5 cm Tieftöner: Konus 13 cm Belastbarkeit (Nenn-/Musikb.): 60 W / 110 W Wirkungsgrad: 87 dB Frequenzgang: 55–28.000 Hz 80 kHz (−30 dB) Impedanz: 6 Ohm

For bass you can feel With a mighty 1000 watts of digital amplification, DB4S delivers all the visceral rumble and punch you need to bring cinema sound to life. Nimble and powerful Solid, dramatic bass is delivered through the rigidity and lightness of the uniquely-shaped, variable thickness Aerofoil™ cone. Powerful amplification Thanks to 1000w of digital amplification, DB4S delivers all the precision, control and authority you could ask for. Digital preamplifier DB4S uses a digital preamplifier featuring Dynamic EQ, for optimised audio performance across the available frequency range. Control app Adjust calibration and correction easily using DB4S dedicated smartphone app. What Hi-Fi? 5 Stars I am happy to be able to conclude this review with the statement that, without any shadow of a doubt, the B&W DB4S is yet another great subwoofer from this great British company. Size & weight Dimensions Height 377mm (14.8 in) including feet Width 360mm (14.1 in) Depth 368mm (14.5 in) Net weight 26kg (57.3 lb) Technical details Technical features 1000W Class D Hypex amplifier 1x ø250mm (10 in) Aerofoil™ cone bass Digital preamplifier with Dynamic EQ App-based set-up and BT-LE control Description Active closed-box subwoofer system Drive units 1x ø250mm (10 in) Aerofoil™ cone bass Frequency range -6dB at 8.5Hz - 500Hz Frequency response 10Hz - 350 Hz -3dB (centered on level at 100Hz) Power consumption 1/8th of rated power 195W Standby <0.5W Max power output 1000W Inputs 2 x XLR 2 x RCA 2 x 3.5mm 12V trigger RS-232 - 9-pin D connector Input impedance RCA: 10 kOhm XLR: 20 kOhm Signal / Noise 82 dB Finishes Cabinet finishes Gloss Black Satin White Rosenut Grille finishes Black Grey Black

For bass you can feel With a mighty 1000 watts of digital amplification, DB4S delivers all the visceral rumble and punch you need to bring cinema sound to life. Nimble and powerful Solid, dramatic bass is delivered through the rigidity and lightness of the uniquely-shaped, variable thickness Aerofoil™ cone. Powerful amplification Thanks to 1000w of digital amplification, DB4S delivers all the precision, control and authority you could ask for. Digital preamplifier DB4S uses a digital preamplifier featuring Dynamic EQ, for optimised audio performance across the available frequency range. Control app Adjust calibration and correction easily using DB4S dedicated smartphone app. What Hi-Fi? 5 Stars I am happy to be able to conclude this review with the statement that, without any shadow of a doubt, the B&W DB4S is yet another great subwoofer from this great British company. Size & weight Dimensions Height 377mm (14.8 in) including feet Width 360mm (14.1 in) Depth 368mm (14.5 in) Net weight 26kg (57.3 lb) Technical details Technical features 1000W Class D Hypex amplifier 1x ø250mm (10 in) Aerofoil™ cone bass Digital preamplifier with Dynamic EQ App-based set-up and BT-LE control Description Active closed-box subwoofer system Drive units 1x ø250mm (10 in) Aerofoil™ cone bass Frequency range -6dB at 8.5Hz - 500Hz Frequency response 10Hz - 350 Hz -3dB (centered on level at 100Hz) Power consumption 1/8th of rated power 195W Standby <0.5W Max power output 1000W Inputs 2 x XLR 2 x RCA 2 x 3.5mm 12V trigger RS-232 - 9-pin D connector Input impedance RCA: 10 kOhm XLR: 20 kOhm Signal / Noise 82 dB Finishes Cabinet finishes Gloss Black Satin White Rosenut Grille finishes Black Grey Black

All the music The W2 wireless platform in LSX II LT makes music streaming effortless and guarantees pristine sound quality. Plug and play LSX II LT supports HDMI ARC and USB-C inputs, making it the perfect companion for TV, desktop and more. Effortless multiroom When partnered with other speakers from the LS Wireless Collection, you can use AirPlay 2 or Chromecast to fill the entire house with the same playlist. Minimal design, versatile placement The LSX II LT features a minimal design that effortlessly blends with any home decor and also offers versatile placement options. You can place the speakers on a bookshelf or desktop with dedicated accessories. WIRELESS STREAMING FEATURES Chromecast built-in UPnP Compatible Bluetooth 5.0 SUPPORTED FORMAT (NETWORK) DSD, FLAC, WAV, AIFF, ALAC, AAC, WMA, MP3, M4A, LPCM and Ogg Vorbis INPUTS HDMI ARC USB Type C TOSLINK Optical SYSTEM CONFIGURATION Primary active Secondary passive (powered from primary speaker) INTERSPEAKER CONNECTION Wired interspeaker connection with USB-C* What is in the box A set of LSX II LT Power cord Interspeaker cable (3m) Remote control Quick Start Guide Warranty and safety information Drive Units (per speaker) Uni-Q driver array HF: 19mm (0.75in.) aluminium dome LF/MF: 115mm (4.5in.) magnesium/aluminium alloy cone Frequency Range (-6dB) 49Hz - 47kHz Depends on EQ settings Frequency Response (±3dB) 54Hz - 28kHz Depends on EQ settings Amplifier Output Power (per speaker) LF: 70W, HF: 30W Amplifier Class (per speaker) LF: Class D, HF: Class D Max SPL measured at 1m 102 dB Wireless Streaming Features AirPlay 2, Google Chromecast, Chromecast Built-in, UPnP Compatible, Bluetooth 5.0 Streaming Services Spotify via Spotify Connect, Tidal via Tidal Connect, Amazon Music, Qobuz, Deezer, QQ Music via QPlay, Internet Radio, Podcast Depends on services availability in different countries Source Resolution Network up to 384kHz/24bit, Optical up to 96kHz/24bit, USB Type C up to 96kHz/24bit, HDMI up to 48kHz/16bit Depends on source resolution Interspeaker Connection Wired: all sources resampled to 96kHz/24bit PCM Supported Formats (Network) DSD, FLAC, WAV, AIFF, ALAC, AAC, WMA, MP3, M4A, LPCM, Ogg Vorbis Dimensions (HxWxD per speaker) 240 × 155 × 180 mm (9.5 × 6.1 × 7.1 in.) Weight (per set) 6.8kg (15.0lbs) Power Input 100 – 240VAC 50/60Hz Power Consumption 200W (operating power), <2.0W (standby power) Inputs HDMI ARC, TOSLINK Optical, USB Type C, RJ45 Ethernet (network), USB Type C (interspeaker) Output RCA Subwoofer output Wi-Fi Network Standard IEEE 802.11a/b/g/n/ac, IPv4, IPv6 Wi-Fi Network Frequency Band Dual-band 2.4 GHz / 5 GHz Secondary Speaker Inputs USB Type C (interspeaker)

All the music The W2 wireless platform in LSX II LT makes music streaming effortless and guarantees pristine sound quality. Plug and play LSX II LT supports HDMI ARC and USB-C inputs, making it the perfect companion for TV, desktop and more. Effortless multiroom When partnered with other speakers from the LS Wireless Collection, you can use AirPlay 2 or Chromecast to fill the entire house with the same playlist. Minimal design, versatile placement The LSX II LT features a minimal design that effortlessly blends with any home decor and also offers versatile placement options. You can place the speakers on a bookshelf or desktop with dedicated accessories. WIRELESS STREAMING FEATURES Chromecast built-in UPnP Compatible Bluetooth 5.0 SUPPORTED FORMAT (NETWORK) DSD, FLAC, WAV, AIFF, ALAC, AAC, WMA, MP3, M4A, LPCM and Ogg Vorbis INPUTS HDMI ARC USB Type C TOSLINK Optical SYSTEM CONFIGURATION Primary active Secondary passive (powered from primary speaker) INTERSPEAKER CONNECTION Wired interspeaker connection with USB-C* What is in the box A set of LSX II LT Power cord Interspeaker cable (3m) Remote control Quick Start Guide Warranty and safety information Drive Units (per speaker) Uni-Q driver array HF: 19mm (0.75in.) aluminium dome LF/MF: 115mm (4.5in.) magnesium/aluminium alloy cone Frequency Range (-6dB) 49Hz - 47kHz Depends on EQ settings Frequency Response (±3dB) 54Hz - 28kHz Depends on EQ settings Amplifier Output Power (per speaker) LF: 70W, HF: 30W Amplifier Class (per speaker) LF: Class D, HF: Class D Max SPL measured at 1m 102 dB Wireless Streaming Features AirPlay 2, Google Chromecast, Chromecast Built-in, UPnP Compatible, Bluetooth 5.0 Streaming Services Spotify via Spotify Connect, Tidal via Tidal Connect, Amazon Music, Qobuz, Deezer, QQ Music via QPlay, Internet Radio, Podcast Depends on services availability in different countries Source Resolution Network up to 384kHz/24bit, Optical up to 96kHz/24bit, USB Type C up to 96kHz/24bit, HDMI up to 48kHz/16bit Depends on source resolution Interspeaker Connection Wired: all sources resampled to 96kHz/24bit PCM Supported Formats (Network) DSD, FLAC, WAV, AIFF, ALAC, AAC, WMA, MP3, M4A, LPCM, Ogg Vorbis Dimensions (HxWxD per speaker) 240 × 155 × 180 mm (9.5 × 6.1 × 7.1 in.) Weight (per set) 6.8kg (15.0lbs) Power Input 100 – 240VAC 50/60Hz Power Consumption 200W (operating power), <2.0W (standby power) Inputs HDMI ARC, TOSLINK Optical, USB Type C, RJ45 Ethernet (network), USB Type C (interspeaker) Output RCA Subwoofer output Wi-Fi Network Standard IEEE 802.11a/b/g/n/ac, IPv4, IPv6 Wi-Fi Network Frequency Band Dual-band 2.4 GHz / 5 GHz Secondary Speaker Inputs USB Type C (interspeaker)

The LS60's sound profile is smooth, consistent, and extremely natural, delivering an incredibly accurate and immersive listening experience. Taking advantage of KEF's innovative technologies, the Single Apparent Source design utilises precise driver calibration to ensure that the entire frequency spectrum appears to radiate from a single point. Taken from their flagship Blade speaker, this feature gives these wireless floorstanding speakers highly accurate imaging and accurate sound across larger space. The LS60's drivers are built with KEF's Uni-Q® driver array, which places its vented tweeter in the acoustic centre of the cone. This combined with their Uni-Core™ woofer design which improves force cancelling drivers to output deeper, accurate bass from smaller cabinets makes these speakers sound truly excellent at all times. This one-two punch of innovative driver design ensures that the LS60's sound is consistent no matter where you are in the room. No more hunting for the best position, your entire space has now become one large sweet spot. The final unique characteristic of the LS60's sound is its Metamaterial Absorption Technology (MAT™). MAT is a complex, winding structure that eliminates unwanted sound from the rear of the speaker drivers, delivering a pure and realistic sound that you'll get lost in instantaneously. Loading a single speaker with all of this staggering technology makes the LS60's some of the most natural sounding floorstanding speakers available. Featuring not just one, but four unique technical innovations in a pair of speakers, the LS60 deliver acoustic excellence for any occasion. Celebrating 60 Years of Innovation LS60 Wireless combines all of KEF's core technology to provide one of the most technologically advanced wireless floorstanding speakers. Designed in Collaboration with Michael Young Minimalistic, and futuristic, the LS60's physical design reflects what KEF are aiming to achieve sonically. The LS60 look and feel natural, and sleek. Single Apparent Source Technology Utilising precise calibration of their drivers, the LS60 gives exceedingly coherent sound that appears to come from a single point, delivering detailed stereo information and accurate sound across a larger space. Uni-Q Driver Design By placing the tweeter accurately at the acoustic centre of the bass/midrange drivers, both units act together as a single point source. This makes for a more even sound distribution, eliminating the need for sweet spots. The LS60 sounds its best absolutely everywhere. Uni-Core Speaker Cones KEF's engineers have iterated on typical force cancelling speaker cones by combining the traditional back-to-back drivers into a single motor system. The overlapping voice coils deliver improved driver excursion, giving low frequencies more depth and output in smaller cabinets. Metamaterial Absorption Technology MAT™ is an advanced, maze-like structure that eliminates unwanted sound from the rear of the driver, giving pure, realistic sound. Designed in collaboration with the Acoustic Metamaterials Group, this feature revolutionises loudspeaker design. Music Integrity Engine The Music Integrity Engine, having been the heart of KEF's previous LS50 Wireless II is a collection of bespoke Digital Signal Processing algorithms. These algorithms are optimised for the Uni-Q drivers, making them deliver a perfectly timed performance, improving imaging and tightening sound for snappy, clear transients. Advanced Amplification The LS60's built-in amplifiers deliver a total of 1400 W of amplification. Class A/B tweeter amplification provides smooth, nuanced treble that fits the LS60's natural, realistic sound. Then, dedicated Class D amplification powering the mid and bass drivers assure powerful, but controlled and articulate low-frequencies. Comprehensive Connectivity The LS60 supports audio streaming from a wide variety of formats. All major music streaming services, a wide range of supported audio formats, and wireless streaming via Chromecast, Bluetooth, or Roon are all options. Plus, wired HDMI, optical, coaxial, and RCA connections, as well as subwoofer outputs allow you to expand and use your system however suits you. Dimensions (HWD per speaker) 1090 x 212 x 394 mm (42.9 x 8.3 x 15.5 in.) with plinth 1042 x 130 x 321 mm (41.0 x 5.1 x 12.6 in.) without plinth Weight (per set) 62.4 kg (138 lbs) Drive Units (per driver) HF: 19 mm (0.75 in.) vented aluminium dome with Metamaterial Absorption Technology MF: 100 mm (4 in.) aluminium cone LF: 4 x 135 mm (5.25 in.) Uni-Core Force Cancelling Driver Frequency Range (-6 dB) 26 Hz - 36 kHz (measured at 85 dB/1 m, depends on EQ settings) Frequency Range (±3 dB) 31 Hz - 24 kHz (measured at 85 dB/1 m, depends on EQ settings) Amplifier Output Power (per driver) HF: 100 W MF: 100 W LF: 500 W Amplifier Class (per driver) HF: Class AB MF: Class D LF: Class D Maximum SPL 111 dB (measured at 1 m) Wireless Streaming Features AirPlay 2 Google Chromecast Roon Ready UPnP Compatible Bluetooth 4.2 Streaming Services Spotify via Spotify Connect Tidal via Tidal Connect Amazon Music Qobuz Deezer QQ Music via QPlay Internet Radio Podcasts Input Resolution Network up to 24bit/384kHz Optical up to 24bit/96kHz Coaxial up to 24bit/192kHz HDMI up to 24bit/192kHz Interspeaker Connection Wireless: all sources resampled to 24bit/96kHz PCM Wired: all sources resampled to 24bit/192kHz PCM Supported Format Types (all inputs) FLAC, WAV, AIFF, ALAC, AAC, WMA, MP3, M4A, LPCM and Ogg Vorbis Supported Format (network) MQA, DSD Power Input 100 – 240VAC 50/60Hz Power Consumption 450W (operating power) Inputs (Primary Speaker) HDMI eARC TOSLINK Optical Digital Coaxial Analog RCA USB Type A (service) RJ45 Ethernet (network) RJ45 Ethernet (interspeaker) Inputs (Secondary Speaker) USB Type A (service) RJ45 Ethernet (interspeaker) Output (Primary Speaker) RCA Subwoofer output Output (Secondary Speaker) RCA Subwoofer output Wi-Fi Network Standard IEEE 802.11a/b/g/n/ac IPv4, IPv6 Wi-Fi Network Frequency Band Dual-band 2.4 GHz / 5 GHz

The LS60's sound profile is smooth, consistent, and extremely natural, delivering an incredibly accurate and immersive listening experience. Taking advantage of KEF's innovative technologies, the Single Apparent Source design utilises precise driver calibration to ensure that the entire frequency spectrum appears to radiate from a single point. Taken from their flagship Blade speaker, this feature gives these wireless floorstanding speakers highly accurate imaging and accurate sound across larger space. The LS60's drivers are built with KEF's Uni-Q® driver array, which places its vented tweeter in the acoustic centre of the cone. This combined with their Uni-Core™ woofer design which improves force cancelling drivers to output deeper, accurate bass from smaller cabinets makes these speakers sound truly excellent at all times. This one-two punch of innovative driver design ensures that the LS60's sound is consistent no matter where you are in the room. No more hunting for the best position, your entire space has now become one large sweet spot. The final unique characteristic of the LS60's sound is its Metamaterial Absorption Technology (MAT™). MAT is a complex, winding structure that eliminates unwanted sound from the rear of the speaker drivers, delivering a pure and realistic sound that you'll get lost in instantaneously. Loading a single speaker with all of this staggering technology makes the LS60's some of the most natural sounding floorstanding speakers available. Featuring not just one, but four unique technical innovations in a pair of speakers, the LS60 deliver acoustic excellence for any occasion. Celebrating 60 Years of Innovation LS60 Wireless combines all of KEF's core technology to provide one of the most technologically advanced wireless floorstanding speakers. Designed in Collaboration with Michael Young Minimalistic, and futuristic, the LS60's physical design reflects what KEF are aiming to achieve sonically. The LS60 look and feel natural, and sleek. Single Apparent Source Technology Utilising precise calibration of their drivers, the LS60 gives exceedingly coherent sound that appears to come from a single point, delivering detailed stereo information and accurate sound across a larger space. Uni-Q Driver Design By placing the tweeter accurately at the acoustic centre of the bass/midrange drivers, both units act together as a single point source. This makes for a more even sound distribution, eliminating the need for sweet spots. The LS60 sounds its best absolutely everywhere. Uni-Core Speaker Cones KEF's engineers have iterated on typical force cancelling speaker cones by combining the traditional back-to-back drivers into a single motor system. The overlapping voice coils deliver improved driver excursion, giving low frequencies more depth and output in smaller cabinets. Metamaterial Absorption Technology MAT™ is an advanced, maze-like structure that eliminates unwanted sound from the rear of the driver, giving pure, realistic sound. Designed in collaboration with the Acoustic Metamaterials Group, this feature revolutionises loudspeaker design. Music Integrity Engine The Music Integrity Engine, having been the heart of KEF's previous LS50 Wireless II is a collection of bespoke Digital Signal Processing algorithms. These algorithms are optimised for the Uni-Q drivers, making them deliver a perfectly timed performance, improving imaging and tightening sound for snappy, clear transients. Advanced Amplification The LS60's built-in amplifiers deliver a total of 1400 W of amplification. Class A/B tweeter amplification provides smooth, nuanced treble that fits the LS60's natural, realistic sound. Then, dedicated Class D amplification powering the mid and bass drivers assure powerful, but controlled and articulate low-frequencies. Comprehensive Connectivity The LS60 supports audio streaming from a wide variety of formats. All major music streaming services, a wide range of supported audio formats, and wireless streaming via Chromecast, Bluetooth, or Roon are all options. Plus, wired HDMI, optical, coaxial, and RCA connections, as well as subwoofer outputs allow you to expand and use your system however suits you. Dimensions (HWD per speaker) 1090 x 212 x 394 mm (42.9 x 8.3 x 15.5 in.) with plinth 1042 x 130 x 321 mm (41.0 x 5.1 x 12.6 in.) without plinth Weight (per set) 62.4 kg (138 lbs) Drive Units (per driver) HF: 19 mm (0.75 in.) vented aluminium dome with Metamaterial Absorption Technology MF: 100 mm (4 in.) aluminium cone LF: 4 x 135 mm (5.25 in.) Uni-Core Force Cancelling Driver Frequency Range (-6 dB) 26 Hz - 36 kHz (measured at 85 dB/1 m, depends on EQ settings) Frequency Range (±3 dB) 31 Hz - 24 kHz (measured at 85 dB/1 m, depends on EQ settings) Amplifier Output Power (per driver) HF: 100 W MF: 100 W LF: 500 W Amplifier Class (per driver) HF: Class AB MF: Class D LF: Class D Maximum SPL 111 dB (measured at 1 m) Wireless Streaming Features AirPlay 2 Google Chromecast Roon Ready UPnP Compatible Bluetooth 4.2 Streaming Services Spotify via Spotify Connect Tidal via Tidal Connect Amazon Music Qobuz Deezer QQ Music via QPlay Internet Radio Podcasts Input Resolution Network up to 24bit/384kHz Optical up to 24bit/96kHz Coaxial up to 24bit/192kHz HDMI up to 24bit/192kHz Interspeaker Connection Wireless: all sources resampled to 24bit/96kHz PCM Wired: all sources resampled to 24bit/192kHz PCM Supported Format Types (all inputs) FLAC, WAV, AIFF, ALAC, AAC, WMA, MP3, M4A, LPCM and Ogg Vorbis Supported Format (network) MQA, DSD Power Input 100 – 240VAC 50/60Hz Power Consumption 450W (operating power) <2.0W (standby power) Inputs (Primary Speaker) HDMI eARC TOSLINK Optical Digital Coaxial Analog RCA USB Type A (service) RJ45 Ethernet (network) RJ45 Ethernet (interspeaker) Inputs (Secondary Speaker) USB Type A (service) RJ45 Ethernet (interspeaker) Output (Primary Speaker) RCA Subwoofer output Output (Secondary Speaker) RCA Subwoofer output Wi-Fi Network Standard IEEE 802.11a/b/g/n/ac IPv4, IPv6 Wi-Fi Network Frequency Band Dual-band 2.4 GHz / 5 GHz

The LS60's sound profile is smooth, consistent, and extremely natural, delivering an incredibly accurate and immersive listening experience. Taking advantage of KEF's innovative technologies, the Single Apparent Source design utilises precise driver calibration to ensure that the entire frequency spectrum appears to radiate from a single point. Taken from their flagship Blade speaker, this feature gives these wireless floorstanding speakers highly accurate imaging and accurate sound across larger space. The LS60's drivers are built with KEF's Uni-Q® driver array, which places its vented tweeter in the acoustic centre of the cone. This combined with their Uni-Core™ woofer design which improves force cancelling drivers to output deeper, accurate bass from smaller cabinets makes these speakers sound truly excellent at all times. This one-two punch of innovative driver design ensures that the LS60's sound is consistent no matter where you are in the room. No more hunting for the best position, your entire space has now become one large sweet spot. The final unique characteristic of the LS60's sound is its Metamaterial Absorption Technology (MAT™). MAT is a complex, winding structure that eliminates unwanted sound from the rear of the speaker drivers, delivering a pure and realistic sound that you'll get lost in instantaneously. Loading a single speaker with all of this staggering technology makes the LS60's some of the most natural sounding floorstanding speakers available. Featuring not just one, but four unique technical innovations in a pair of speakers, the LS60 deliver acoustic excellence for any occasion. Celebrating 60 Years of Innovation LS60 Wireless combines all of KEF's core technology to provide one of the most technologically advanced wireless floorstanding speakers. Designed in Collaboration with Michael Young Minimalistic, and futuristic, the LS60's physical design reflects what KEF are aiming to achieve sonically. The LS60 look and feel natural, and sleek. Single Apparent Source Technology Utilising precise calibration of their drivers, the LS60 gives exceedingly coherent sound that appears to come from a single point, delivering detailed stereo information and accurate sound across a larger space. Uni-Q Driver Design By placing the tweeter accurately at the acoustic centre of the bass/midrange drivers, both units act together as a single point source. This makes for a more even sound distribution, eliminating the need for sweet spots. The LS60 sounds its best absolutely everywhere. Uni-Core Speaker Cones KEF's engineers have iterated on typical force cancelling speaker cones by combining the traditional back-to-back drivers into a single motor system. The overlapping voice coils deliver improved driver excursion, giving low frequencies more depth and output in smaller cabinets. Metamaterial Absorption Technology MAT™ is an advanced, maze-like structure that eliminates unwanted sound from the rear of the driver, giving pure, realistic sound. Designed in collaboration with the Acoustic Metamaterials Group, this feature revolutionises loudspeaker design. Music Integrity Engine The Music Integrity Engine, having been the heart of KEF's previous LS50 Wireless II is a collection of bespoke Digital Signal Processing algorithms. These algorithms are optimised for the Uni-Q drivers, making them deliver a perfectly timed performance, improving imaging and tightening sound for snappy, clear transients. Advanced Amplification The LS60's built-in amplifiers deliver a total of 1400 W of amplification. Class A/B tweeter amplification provides smooth, nuanced treble that fits the LS60's natural, realistic sound. Then, dedicated Class D amplification powering the mid and bass drivers assure powerful, but controlled and articulate low-frequencies. Comprehensive Connectivity The LS60 supports audio streaming from a wide variety of formats. All major music streaming services, a wide range of supported audio formats, and wireless streaming via Chromecast, Bluetooth, or Roon are all options. Plus, wired HDMI, optical, coaxial, and RCA connections, as well as subwoofer outputs allow you to expand and use your system however suits you. Dimensions (HWD per speaker) 1090 x 212 x 394 mm (42.9 x 8.3 x 15.5 in.) with plinth 1042 x 130 x 321 mm (41.0 x 5.1 x 12.6 in.) without plinth Weight (per set) 62.4 kg (138 lbs) Drive Units (per driver) HF: 19 mm (0.75 in.) vented aluminium dome with Metamaterial Absorption Technology MF: 100 mm (4 in.) aluminium cone LF: 4 x 135 mm (5.25 in.) Uni-Core Force Cancelling Driver Frequency Range (-6 dB) 26 Hz - 36 kHz (measured at 85 dB/1 m, depends on EQ settings) Frequency Range (±3 dB) 31 Hz - 24 kHz (measured at 85 dB/1 m, depends on EQ settings) Amplifier Output Power (per driver) HF: 100 W MF: 100 W LF: 500 W Amplifier Class (per driver) HF: Class AB MF: Class D LF: Class D Maximum SPL 111 dB (measured at 1 m) Wireless Streaming Features AirPlay 2 Google Chromecast Roon Ready UPnP Compatible Bluetooth 4.2 Streaming Services Spotify via Spotify Connect Tidal via Tidal Connect Amazon Music Qobuz Deezer QQ Music via QPlay Internet Radio Podcasts Input Resolution Network up to 24bit/384kHz Optical up to 24bit/96kHz Coaxial up to 24bit/192kHz HDMI up to 24bit/192kHz Interspeaker Connection Wireless: all sources resampled to 24bit/96kHz PCM Wired: all sources resampled to 24bit/192kHz PCM Supported Format Types (all inputs) FLAC, WAV, AIFF, ALAC, AAC, WMA, MP3, M4A, LPCM and Ogg Vorbis Supported Format (network) MQA, DSD Power Input 100 – 240VAC 50/60Hz Power Consumption 450W (operating power) <2.0W (standby power) Inputs (Primary Speaker) HDMI eARC TOSLINK Optical Digital Coaxial Analog RCA USB Type A (service) RJ45 Ethernet (network) RJ45 Ethernet (interspeaker) Inputs (Secondary Speaker) USB Type A (service) RJ45 Ethernet (interspeaker) Output (Primary Speaker) RCA Subwoofer output Output (Secondary Speaker) RCA Subwoofer output Wi-Fi Network Standard IEEE 802.11a/b/g/n/ac IPv4, IPv6 Wi-Fi Network Frequency Band Dual-band 2.4 GHz / 5 GHz

The LS60's sound profile is smooth, consistent, and extremely natural, delivering an incredibly accurate and immersive listening experience. Taking advantage of KEF's innovative technologies, the Single Apparent Source design utilises precise driver calibration to ensure that the entire frequency spectrum appears to radiate from a single point. Taken from their flagship Blade speaker, this feature gives these wireless floorstanding speakers highly accurate imaging and accurate sound across larger space. The LS60's drivers are built with KEF's Uni-Q® driver array, which places its vented tweeter in the acoustic centre of the cone. This combined with their Uni-Core™ woofer design which improves force cancelling drivers to output deeper, accurate bass from smaller cabinets makes these speakers sound truly excellent at all times. This one-two punch of innovative driver design ensures that the LS60's sound is consistent no matter where you are in the room. No more hunting for the best position, your entire space has now become one large sweet spot. The final unique characteristic of the LS60's sound is its Metamaterial Absorption Technology (MAT™). MAT is a complex, winding structure that eliminates unwanted sound from the rear of the speaker drivers, delivering a pure and realistic sound that you'll get lost in instantaneously. Loading a single speaker with all of this staggering technology makes the LS60's some of the most natural sounding floorstanding speakers available. Featuring not just one, but four unique technical innovations in a pair of speakers, the LS60 deliver acoustic excellence for any occasion. Celebrating 60 Years of Innovation LS60 Wireless combines all of KEF's core technology to provide one of the most technologically advanced wireless floorstanding speakers. Designed in Collaboration with Michael Young Minimalistic, and futuristic, the LS60's physical design reflects what KEF are aiming to achieve sonically. The LS60 look and feel natural, and sleek. Single Apparent Source Technology Utilising precise calibration of their drivers, the LS60 gives exceedingly coherent sound that appears to come from a single point, delivering detailed stereo information and accurate sound across a larger space. Uni-Q Driver Design By placing the tweeter accurately at the acoustic centre of the bass/midrange drivers, both units act together as a single point source. This makes for a more even sound distribution, eliminating the need for sweet spots. The LS60 sounds its best absolutely everywhere. Uni-Core Speaker Cones KEF's engineers have iterated on typical force cancelling speaker cones by combining the traditional back-to-back drivers into a single motor system. The overlapping voice coils deliver improved driver excursion, giving low frequencies more depth and output in smaller cabinets. Metamaterial Absorption Technology MAT™ is an advanced, maze-like structure that eliminates unwanted sound from the rear of the driver, giving pure, realistic sound. Designed in collaboration with the Acoustic Metamaterials Group, this feature revolutionises loudspeaker design. Music Integrity Engine The Music Integrity Engine, having been the heart of KEF's previous LS50 Wireless II is a collection of bespoke Digital Signal Processing algorithms. These algorithms are optimised for the Uni-Q drivers, making them deliver a perfectly timed performance, improving imaging and tightening sound for snappy, clear transients. Advanced Amplification The LS60's built-in amplifiers deliver a total of 1400 W of amplification. Class A/B tweeter amplification provides smooth, nuanced treble that fits the LS60's natural, realistic sound. Then, dedicated Class D amplification powering the mid and bass drivers assure powerful, but controlled and articulate low-frequencies. Comprehensive Connectivity The LS60 supports audio streaming from a wide variety of formats. All major music streaming services, a wide range of supported audio formats, and wireless streaming via Chromecast, Bluetooth, or Roon are all options. Plus, wired HDMI, optical, coaxial, and RCA connections, as well as subwoofer outputs allow you to expand and use your system however suits you. Dimensions (HWD per speaker) 1090 x 212 x 394 mm (42.9 x 8.3 x 15.5 in.) with plinth 1042 x 130 x 321 mm (41.0 x 5.1 x 12.6 in.) without plinth Weight (per set) 62.4 kg (138 lbs) Drive Units (per driver) HF: 19 mm (0.75 in.) vented aluminium dome with Metamaterial Absorption Technology MF: 100 mm (4 in.) aluminium cone LF: 4 x 135 mm (5.25 in.) Uni-Core Force Cancelling Driver Frequency Range (-6 dB) 26 Hz - 36 kHz (measured at 85 dB/1 m, depends on EQ settings) Frequency Range (±3 dB) 31 Hz - 24 kHz (measured at 85 dB/1 m, depends on EQ settings) Amplifier Output Power (per driver) HF: 100 W MF: 100 W LF: 500 W Amplifier Class (per driver) HF: Class AB MF: Class D LF: Class D Maximum SPL 111 dB (measured at 1 m) Wireless Streaming Features AirPlay 2 Google Chromecast Roon Ready UPnP Compatible Bluetooth 4.2 Streaming Services Spotify via Spotify Connect Tidal via Tidal Connect Amazon Music Qobuz Deezer QQ Music via QPlay Internet Radio Podcasts Input Resolution Network up to 24bit/384kHz Optical up to 24bit/96kHz Coaxial up to 24bit/192kHz HDMI up to 24bit/192kHz Interspeaker Connection Wireless: all sources resampled to 24bit/96kHz PCM Wired: all sources resampled to 24bit/192kHz PCM Supported Format Types (all inputs) FLAC, WAV, AIFF, ALAC, AAC, WMA, MP3, M4A, LPCM and Ogg Vorbis Supported Format (network) MQA, DSD Power Input 100 – 240VAC 50/60Hz Power Consumption 450W (operating power) <2.0W (standby power) Inputs (Primary Speaker) HDMI eARC TOSLINK Optical Digital Coaxial Analog RCA USB Type A (service) RJ45 Ethernet (network) RJ45 Ethernet (interspeaker) Inputs (Secondary Speaker) USB Type A (service) RJ45 Ethernet (interspeaker) Output (Primary Speaker) RCA Subwoofer output Output (Secondary Speaker) RCA Subwoofer output Wi-Fi Network Standard IEEE 802.11a/b/g/n/ac IPv4, IPv6 Wi-Fi Network Frequency Band Dual-band 2.4 GHz / 5 GHz

"A superb-sounding, fully-featured wireless speaker that justifies its considerable expense." Stuff - 5 Stars ‘It has more rivals to face than the Mu-so ever did - but those B&W, Devialet and B&O alternatives (to name but three) only exist because of the new ground broken by Mu-so. And Mu-so 2 seems more than capable of maintaining its predecessor’s position at the front of the pack.’ T3 - Best Multi Room Speaker Of The Year ‘There’s increasing competition in the ‘premium wireless speaker’ market, but Naim Mu-so 2 just crushed it. An awesome, thumping wall of sound and reliable, versatile software platform make for the perfect 21st-century music experience.’ Best Product 2019-2020 - All-In One System "Naim created a whole new market sector with the launch of its Mu-so: a high quality all-in-one streaming system. With the Mu-so 2nd Generation, it has taken that winning formula and reinvented it, packing in both extra features and more sound quality, utilising completely new drivers co-designed with Focal, making this even more of a one-box solution for room-filling music." "Naim created a whole new market sector with the launch of its Mu-so: a high quality all-in-one streaming system. With the Mu-so 2nd Generation, it has taken that winning formula and reinvented it, packing in both extra features and more sound quality, utilising completely new drivers co-designed with Focal, making this even more of a one-box solution for room-filling music." At the heart of Mu-so 2nd Generation is Naim’s music-streaming platform, developed by 25 engineers over 3 years to offer the very best performance whether playing your own digital music collection, a world of Internet radio, or music streaming services such as TIDAL and Spotify. Continuing its high-performance credentials, Mu-so 2nd Generation’s 450 Watts of music power are joined by all-new speaker drivers – optimised in conjunction with Focal, the acoustic specialist celebrating its 40th anniversary, and Naim’s Vervent Audio associate; more than 10 times more processing power for even greater musical accuracy, and a re-engineered cabinet design to further enhance bass delivery. Stream your music in high-resolution quality (up to 32bit/384kHz) via UPnP, or browse millions of songs through AirPlay 2 (including Apple Music), Spotify Connect, TIDAL, Chromecast built-in and Internet radio. Upgraded Wi-Fi connectivity promises a slicker streaming experience, while Ethernet remains an option if you prefer things hard-wired. You can also connect devices wirelessly via Bluetooth. Mu-so 2nd Generation’s USB input, meanwhile, supports music playback from USB drives. What's New? New intelligent controls - All-new intuitive interface has 15 touch sensitive buttons and a bold, illuminated volume dial. A proximity sensor wakes the display. Multi-room made easy - 3 ways to go multi-room, via Naim, Apple or Google Apps. More music power - New multicore Digital Signal Processor (DSP) drives higher performance, providing 2000 MIPS (Million Instructions Per Second) compared to original Mu-so’s single-core, 150MIPS DSP. Upgraded speaker drivers - A joint development project between Naim and Focal R&D departments has delivered improved and highly optimised drive units for Mu-so 2nd Generation. Focal has been creating benchmark acoustic equipment since 1979. Award-winning music streaming technology - Featured in the Uniti range of all-in-one players, Naim's high-end network players and now Mu-so 2nd Generation, Naim’s unique streaming platform is extremely powerful and adapts to new technologies. Improved Bass Performance - Mu-so 2nd Generation has been re-engineered to have a 13% increase in cabinet volume, which enables bigger, better bass performance. HDMI ARC - An all-new HDMI ARC input lets you easily connect your TV to experience a huge boost in sound quality; and allows audio control via the TV’s remote handset. New Grille finish and colours - Mu-so 2nd Generation’s speaker grille has had a style update. The standard black grille can be easily swapped for one of 3 new colour options – Olive, Terracotta, and Peacock - to best suit your taste and décor. Chromecast built-in - Google’s streaming service allows you to seamlessly link to 100s of supported apps, including Deezer, Qobuz, Plex, TuneIn, SoundCloud and Pandora. AirPlay 2 - Stream music from your iOS device or from iTunes and Apple Music and take advantage of Apple’s new multi-room feature. Spotify Connect Native support of Spotify Connect, a better way to listen at home. Listen to Spotify on your Mu-so 2nd Generation, using the Spotify app as a remote. TIDAL The lossless streaming service is integrated into the system for an immersive, high-quality sound experience. Bluetooth - Pair with a Bluetooth device to instantly play your music. Internet Radio - Access thousands of internet radio stations and save your favourite presets for easy access. UPnP Streaming - Stream music from your PC, Mac or network-attached storage in high-resolution quality. Mu-so 2nd Generation supports high-resolution WAV, FLAC and DSD files at resolutions up to 32bit/384kHz. Roon Ready - Roon transforms the experience of browsing music. Beautifully laid-out metadata is located automatically, then interconnected by links to build a searchable digital magazine about your music collection. Room Compensation - Choose from three different settings – Near Wall; Near Corner; No Compensation [In Free Space] - to tailor your listening experience to wherever the Mu-so 2nd Generation sits in the room. Additional connectivity - As well as its new HDMI ARC connection, Mu-so 2nd Generation has a USB input, Optical Digital input and 3.5mm analogue input. All-new remote control - Mu-so 2nd Generation’s premium features and functionality are reflected in its new remote control handset. Alarm Clock - Mu-so 2nd Generation features an alarm clock which can be enabled via the settings menu in the Naim app. Audio Inputs Digital (S/PDIF) Optical S/PDIF (TosLink) up to 96kHz USB Side USB Type A Analogue 3.5mm jack Other Inputs UPnP, AirPlay, Spotify Connect, Bluetooth (with aptX), Internet Radio via wired Ethernet or Wi-Fi and multiroom client from an existing Naim streamer system Connectivity Remote Control Infra Red (RC5) Network Ethernet (10/100Mbps), Wi-Fi (802.11b/g) 2.4GHz Formats Audio Formats WAV, FLAC and AIFF up to 24bit/192kHz ALAC (Apple Lossless) up to 24bit/96kHz MP3 up to 48kHz, 320kbit (16 bit) AAC up to 48kHz, 320kbit (16bit) OGG and WMA up to 48kHz (16bit) Bluetooth SBC, AAC and aptX Note: All formats to 48kHz maximum over wireless network Internet Radio Provider vTuner premium Internet Radio formats Windows Media-formatted content, MP3, ACC, Ogg Vorbis streams and MMS User Control Product Touch control user interface with rotary volume control Handheld Remote handset included and optional control app for iPad, iPhone, iPod Touch and Android devices Power Amplifier Output 450W - 6 x 75W (into 6 Ohm) Power Consumption Typical use: 17W Standby mode: < 4W Deep sleep: < 0.5W Mains Supply 100V, 115V or 230V, 50/60Hz Physical Dimensions (HxWxD) 122 mm x 628 mm x 264 mm Weight 11.2 kg Supplied with Remote control, mains cable (+ plug adaptor market dependant), reset pin-hole tool and quick-start guide [Finishes] Brushed aluminium casework, silver anodised heatsink, black fabric grille. Grille Options Deep Blue, Vibrant Red, Burnt Orange. Certification and Licenses Certification Apple (Made for iPhone), Airplay, vTuner Premium, Spotify Connect, Wi-Fi alliance Licenses Apple MFI and Airplay, Bluetooth, aptX, Spotify Connect, Wi-Fi alliance Speaker Speaker System Dual, three-way Other information Warranty 2 Year