Specifikacija BT Zvučnik Xwave B Online 12W. Xwave B Online (Bluetooth Zvučnik). 12W. FM radio. Vreme na displeju. AUX ulaz, Mikro SD i USB. Handsfree funkcija. Ugrađena litijum-jonska dopunjiva baterija. Xwave B Online Crni. BT zvučnik, FM radio, Micro SD, USB, crni. Specifikacija. Bluetooth bežična veza: 4.2 + EDR. USB: da. Handsfree funkcija: da. FM radio: da. Micro SD: da. AUX ulaz: da. Snaga zvučnika: 2x6W, 3 Ohm, 55mm. Vreme reprodukcije: 4-6h. Frekventni raspon: 80Hz-20KHz. Ulaz za punjenje: 5V/500mA. Baterija: 2600mAh, li-ion. Dimenzije: 400x55x70mm. Težina: 710 gr.

Specifikacija BT Verzija: 4.0 Baterija: 300mAh Dužina reprodukcije: Do 3h čitač kartice Usb port za usb flash do 16GB FM radio AUX konektor Garancija 2 godine

Specifikacija Tip konekcije: Bluetooth BT Verzija: 4.0 Baterija: 300mAh Dužina reprodukcije: Do 3h čitac kartice usb port za usb flash do 16GB FM radio AUX konektor Boja: Crvena Garancija: 2 godine

Specifikacija Proizvođač: Xplore Model: CABANA 2 XP8802Šifra: 42292 • Tip: Prenosni karaoke sistem + 2 mikrofona • Sistem: 2.0 • Snaga zvučnika: 300 W • Mikrofoni: - 1 x žični - 1 x bežični (UHF) • Podržani formati: MP3 i WMA • Zvučnici: - 2 x 4" (10,2 cm) • Povezivanje: - Bluetooth - USB port - MicroSD slot - AUX-in 3,5 mm - mikrofonski 6,35 mm x 1 • FM radio • Karaoke funkcija sa priloženim mikrofonima • Ugrađeni DISCO LED Light efekti • LED ekran sa crvenim pozadinskim osvetljenjem • TWS funkcija povezivanja • Daljinski upravljač • Ugrađena ručica • Dimenzije: 42,5 x 21,3 x 19,5 cm • Težina: 2,9 kg • Boja: Crna

Specifikacija Proizvođač: Xwave Model: B FANCY black Tip: Bežični Bluetooth zvučnik Snaga: 10W - 2 x 5W/4Ω Frekvencijski odziv: 150Hz-20Khz Bluetooth: V3.0 + EDR Ulazi: USB, SD card Podrška: L2CAP / A2DP (AVCTP / AVDTP / AVRCP), može se primati AUDIO signal i kontrolisati uređaj koji je izvor AUDIO signala. Radna udaljenost: do 10m SNR: ≥90db Baterija: 3.7V/ 1200mAh Vreme reprodukcije pri srednjoj glasnoći: 2-2.5 h Veličina drajvera: 52 mm Ostalo: FM radio, Mikrofon za Hands-free funkciju Dimenzije: 80mm * 80mm * 180mm Težina: 590g Punjenje: 5V / 500mA - 2A Boje: crna Garancija: 2 godine.

Specifikacija Prenosni zvučnik Xplore XP8809 200W. Specifikacije- Super prenosni zvučnik + žičani mikrofon. Ugrađen FM radio. Podržana reprodukcija sa Bluetoth uređaja. Podržana reprodukcija sa USB uređaja. Podržana reprodukcija sa microSD kartice. Funkcija karaoke sa mikrofonom. Podržani formati: MP3 i WMA. 200W maksimalne muzičke snage. Moćan 4 inča (10.2cm) BASS niskotonac i 2*1.4inča (3.6cm) visokotonac. 1*3.5mm ulaz AUX. 1*6.5mm džek ulaz za mikrofon/instrument. Ugrađeni DISCO LED LIGHT svetlosni efekti. LED displej sa crvenim svetlom. Punjenje; 5V +- 0.05V/USB. Ugrađena punjiva baterija 3600mAh Li-ion. Kvalitetna ABS plastika za Alu ručicu. Dimenzije: 390*180*210mm.

Specifikacija Bluetooth karaoke prenosni sistem Sistem 2.1 Snaga zvučnika (max) 800 W Super prenosni zvučnik + mikrofoni x2 Mikrofoni 1 x žični 1 x bežični (Wireless 201,6 MHz) Ugrađen FM radio Podržani formati MP3 i WMA Povezivanje Bluetooth USB port MicroSD slot AUX-in 3,5 mm 3 x audio ulaz 6,3 mm Zvučnici 2 x 10" (25,4 cm) BASS Subwoofer 2 x 1" (2,54 cm) TREBLE Karaoke funkcija Ugrađeni DISKO LED Light efekti USB reprodukcija i snimanje LED display sa plavim osvetljenjem Daljinski upravljač Ugrađena punjiva baterija Napajanje AC 220V-240 V ~ 50/60 MHz DC 12-15 V Ručica i točkići za lakši prenos uređaja Boja crna

Specifikacija Bluetooth karaoke prenosni sistem Sistem 2.1 Snaga zvučnika (max) 800 W Super prenosni zvučnik + mikrofoni x2 Mikrofoni 1 x žični 1 x bežični (Wireless 201,6 MHz) Ugrađen FM radio Podržani formati MP3 i WMA Povezivanje Bluetooth USB port MicroSD slot AUX-in 3,5 mm 3 x audio ulaz 6,3 mm Zvučnici 2 x 10" (25,4 cm) BASS Subwoofer 2 x 1" (2,54 cm) TREBLE Karaoke funkcija Ugrađeni DISKO LED Light efekti USB reprodukcija i snimanje LED display sa plavim osvetljenjem Daljinski upravljač Ugrađena punjiva baterija Napajanje AC 220V-240 V ~ 50/60 MHz DC 12-15 V Ručica i točkići za lakši prenos uređaja Boja crna

Specifikacija Bluetooth karaoke prenosni sistem Sistem 2.1 Snaga zvučnika (max) 800 W Super prenosni zvučnik + mikrofoni x2 Mikrofoni 1 x žični 1 x bežični (Wireless 201,6 MHz) Ugrađen FM radio Podržani formati MP3 i WMA Povezivanje Bluetooth USB port MicroSD slot AUX-in 3,5 mm 3 x audio ulaz 6,3 mm Zvučnici 2 x 10" (25,4 cm) BASS Subwoofer 2 x 1" (2,54 cm) TREBLE Karaoke funkcija Ugrađeni DISKO LED Light efekti USB reprodukcija i snimanje LED display sa plavim osvetljenjem Daljinski upravljač Ugrađena punjiva baterija Napajanje AC 220V-240 V ~ 50/60 MHz DC 12-15 V Ručica i točkići za lakši prenos uređaja Boja crna

Specifikacija Prenosni zvučnik Xplore XP8815 350W. Xplore Muzika. XP8815. 350W. Ugrađeno Disko Led svetlo sa efektima. Disko. Prenosni super zvučnik BT/TF/USB/FM/MIC/LED. + Žični mirkofon. Doprinosi velikoj LED Zabavi zvukom, bilo gde da želite da idete. Doprinosi Velikim LED Karaokama, bilo gde da želite da idete. Vi obezbedite muziku. Xplore Disko će se pobrinuti za ostalo. DISKO. Prenosni super zvučnik BT/TF/USB/FM/MIC/LED. Bežična konekcija. MP3 preslušavanje. 350W. Kvalitet: *****. Snažan 2*6.5"(16.5cm) BASS zvučnik i 1" (2.54cm) TROSTRUKI zvučnik. USB Zvuk funkcije SNIMANJA i KARAOKE funkcija (MIC-Mikrofon uključen). Ugrađena RUČKA za lakši transport. Atraktivno: Ugrađeno DISKO LED SVETLO (sa) efektima. USB port. Micro SD. Slot (prorez) za karticu. FM radio. Bluetooth. LED Displej. Plavo osvetljenje. Daljinski upravljač. Uključen. Kvalitetna baterija. Punjiva 7.4V/ 3.6Ah. Disko LED. Animirani efekti. Žični mikrofon. Velike LED KARAOKE, bilo gde da želite da idete. Snažan 2*65" (16.5cm) BASS zvučnik i 1" (2.54cm) TROSTRUKI zvučnik. USB funkcija SNIMANJA zvuka i funkcija KARAOKE (Mikrofon priložen). Kompaktnog oblika ima ugrađenu RUČKU za lakši transport. LED ekran sa PLAVIM osvetljenjem za prikaz statusa i Funkcija. UGRAĐENA punjiva baterija 7.4V 3.6A (Li-baterija) za dug vek trajanja. 3600 mAh. Specifikacije- Super prenosni zvučnik + žičani mikrofon. Ugrađen FM radio. Podržava reprodukciju muzike preko Bluetooth. Podržava reprodukciju i snimanje na USB memoriju. Podržava reprodukciju muzike sa microSD. Karaoke funkcija sa priloženim mikrofonom. Podržani formati: MP3 i WMA. Moćan 2*6.5 inča (16.5cm) BASS niskotonac i 1 inč (2.54cm) visokotonac. 350W maksimalne muzičke snage. Mikrofon: 1 * žičani. Ugrađeni DISCO LED LIGHT svetlosni efekti. 2*6.3mm audio džek ulaz za muzički instrument. 1*3.5mm audio AUX ulaz. Veliko dugme glasnosti. Mega BASS. Daljinski upravljač. LED displej sa plavim osvetljenjem. Napajanje: 220V/9V adapter. Ugrađena punjiva olovna baterija 7.4V/ 3.6Ah. Ugrađena ručica za lakši transport. Kvalitetno ABS plastično kućište. Dimenzije: 254*262*585mm.

Specifikacija Bluetooth Zvučnik Gloomy Bear B1. Funkcije: Pusta MP3 i WMA fajlove sa SD kartice i USB-a, 32GB maximum. FM radio funkcija, pamti do 50 stanica. Bluetooth konekcija. Punjiva baterija ugradjena. AUX audio ulaz. Ugradjen mikrofon. Zvucnici visokog kvaliteta za prirodniji zvuk. Specifikacija: Bluetooth verzija: 5.0 Baterija: model-18650 1500mAh Snaga zvucnika: 5W Frekventni opseg: 80-15KHZ, Voltaza punjenja: 5v 500ma AUX konektor: 3.5mm BI. Bežični zvučnik. Bežična konekcija. Bluetooth 5.0. Podržava aptx CODEC da poboljša maksimalnu tačnost bluetooth audio striminga. Podržava A2DP, AVRCP, SBC, AAC, APTX, BLE dešifrovanje. Podržava TRUE WIRELESS stereo režim uparivanja (sa dva zvučnika u isto vreme). Bežični prihvatajući opseg: 10 m /30 ft. Međupovršina. Bluetooth 5.0 i aptx,ACC i SBC dešifrovanje. 3.5mm audio ulazni port. USB se koristi kao port namene za ažuriranje firmvera (upravljačkog softvera). Površinski materijal. Mat crna. Sjajna bela. Sjajna crvena. Pribor. USB kabal i 3.5mm audio kabal.

The outstanding sound of the Austrian Audio OD505 vocal microphone with active dynamic circuitry has already won over many FOH engineers, technicians and artists. The OD505 WL[KW1] 1 is the ideal solution for all those who are mobile during their performance and depend on a wireless system, but want to retain the authentic Austrian Audio sound. The OD505 WL1 is the perfect performance partner for any artist, whether lead or backing vocals. The natural tuning and exemplary signal quality provide the perfect foundation to bring out the strengths of any voice with minimal tweaks required. In many live situations, ambient sound is a big problem. That’s why a supercardioid polar pattern was chosen for the OD505. This optimally fades out unwanted interference and focuses on the voice. Elements such as drums or other loud instruments in the immediate vicinity are not additionally amplified by the vocal microphone. Austrian Audio’s Open Acoustic sound remains present over the radio transmission. Made in Vienna. Again. Directional characteristic: Supercardioid Frequency range: 35 Hz – 16 kHz Sensitivity: 4.6 mV/Pa Self noise: 26 dB SPL (A) Max. SPL: 150 dB SPL Load impedance: > 1 kΩ Supply voltage: 5-10 V (< 1 mA) Connection: Shure® / Sony / Lectrosonics® Dimensions: 92 x 53 mm Weight: 195 g

The OD505 Active Dynamic Vocal Microphone is designed primarily for the stage, though it is also a very capable microphone for studio application. Uncompromisingly robust, it combines all the advantages of a dynamic microphone with the tonal finesse of a condenser microphone. The OD505 is the perfect choice for singers, podcasters and radio broadcasters. Its amazingly natural sound makes it very easy to shape and highlight a vocalist’s strengths. Featuring Austrian Audio’s proprietary Open Acoustics Technology, the OD505 delivers a pristine, natural and resonance-free sound without any colouring. Made in Austria. The active front capsule requires 48V phantom power and, at 4.4 mV / Pa, has almost the same sensitivity as a condenser microphone. With its active circuitry, the OD505’s sound is always consistent, regardless of the internal resistance of the microphone preamplifier or length of connecting cables. The passive lower capsule is polarity-rotated, it senses and reduces unwanted handling noise, especially at the lower frequencies. The OD505 also includes another Austrian Audio proprietary development: The 3D Pop Noise Diffuser. This filter is specially designed for the OD505 and effectively reduces the impact of plosives. Directional characteristic: Supercardioid Frequency range: 35 Hz – 16 kHz Sensitivity : 4.4 mV/Pa Max. SPL: 154 dB SPL Low cut filter: 120 Hz (2nd order) Impedance: 275 Ω (symmetrical) Load impedance: > 1 kΩ Supply voltage: 48 V (< 1 mA) Main Connector: XLR 3 pin Dimensions: 194 x 53x 53 mm Weight: 340g

READY FOR STAGE The TG H56 microphone commands but does not attract attention – in other words, a comanding and balanced sound meets a subtle appearance. The splash- and sweat-proof omnidirectional microphone can be worn on both sides thanks to the rotatable ear hooks. In addition, it can be positioned with precision due to the he variable microphone arm – benefits that come in to their own when the microphone is used for musicals, theater or sport. OPUS PIN OUT The "Opus" version works with pocket transmitters from the various Opus radio series such as -300, -500, -600, -800, -900 and -910. For wired connection to a microphone input with phantom power the "CV 18" power supply is required. "Opus" and "TG" versions are electrically incompatible. TOURING GEAR THE BEST LIVE MICROPHONE SERIES WE'VE EVER BUILT. Touring Gear - a series of live microphones that are set to excite performers in studios and on stages all over the world. Rugged in design with phenomenal audio quality, they are the perfect complement to beyerdynamic's legendary M series models, including well-known classics such as the M 88 and M 160. Natural sound, no proximity effect due to omnidirectional polar pattern High max. SPL (127 dB) High SNR, low noise Rotatable ear hooks, adjustable neck construction TG- or Opus-wireless systems: for wired use, the optional MA PVA (TG) or CV 18 (Opus) phantom power converter is necessary SUPPLIED ACCESSORIES: Windbreak black or white (WS 56) Bag

The Saramonic SoundBird T3 is an advanced professional shotgun microphone that delivers clear, broadcast-quality sound and provides a comprehensive set of features with a premium suite of included accessories. An internal rechargeable Li-Ion battery provides power for up to 150-hours, and it can also be powered by external phantom power. The all-brass construction is extremely durable and helps to reduce radio frequency interference. The gold-plated XLR output provides the best possible signal transfer and resists corrosion. At 11.1” the SoundBird T3 is the ideal size for use on a camera, boom pole or stand. What you need to sound the best Several built-in controls let you achieve the best possible sound quality in a variety of situations. A Low-Cut button eliminates distracting deep bass sounds like the rumble from HVAC, footsteps and traffic noise. A High-Boost button compensates for frequencies that are lost when you use wind protection and increases vocal intelligibility. A -10dB Pad makes it possible to capture loud sounds without clipping. All of the buttons are illuminated so you can easily see the settings, and an On/Off button changes color based on power source and battery level. Your settings are saved when you turn the mic on and off. A travel-ready suite of premium accessories You need many accessories to use a shotgun microphone properly, and instead of making additional purchases, all of these accessories are all included with SoundBird T3. You get an SR-SMC2 shock mount for attaching to the shoe of a camera or a boom pole. You also get a 2-foot (61cm) XLR output cable, a dedicated stand mount, a storage pouch, a foam windscreen, a MicroUSB charging cable, a hard-shell travel case with a handle and protective foam inserts and a reusable cable strap. You will have all of the essentials for capturing the best possible sound quality for your productions. An advanced professional shotgun microphone with multiple filters that delivers clear, broadcast-quality sound and includes an array of useful accessories with a hard travel case Built-in illuminated buttons: Low-Cut filter removes unwanted rumble sounds, High-Boost adds high frequencies that are lost with wind protection and increases vocal intelligibility, -10dB Pad captures loud sounds Powered by internal rechargeable Li-Ion battery with 150-hour run-time or with external phantom power, illuminated On/Off button changes color based on power source and battery level Durable solid brass construction prevents radio-frequency interference, gold-plated XLR connector resists corrosion and provides the best possible signal transfer Includes a premium shock mount to attach to cameras or boom poles, a dedicated stand mount, storage pouch, foam windscreen, 2-foot (61cm) XLR output cable, hard travel case and more Polar Pattern: Cardioid Frequency Range: 75Hz to 20kHz Sensitivity: -38 ± 3dB (0dB-1V/Pa, at 1kHz 1.5V 2.2K) Output Impedance: 150ohm Dynamic Range: 125dB (per IEC651) Maximum SPL: f=1kHz, THD<1% 105dB Signal-to-Noise Ratio: 80dB SPL (per IEC651) High-Pass Filter: 150Hz Pad: -10dB High Frequency Boost: +6dB Material: Brass Power Requirements: 48V Phantom Power or Built-in Lithium Battery Battery Life: 150 Hours Output Connection: 3-pin XLR, Balanced Output Between Pin 2 (+), Pin 3 (-) and Pin 1 (Ground) Diameter: 0.86” (2.2cm) Length: 11.1” (28.2cm) Weight: 8.48oz (240.5g) 1 x SoundBird T3 Shotgun Microphone 1 x SR-SMC2 Premium Adjustable Shock Mount 1 x Mic Clip Stand Mount 1 x Hard-Shell Travel Case 1 x Microphone Storage Pouch 1 x Foam Windscreen 1 x 2’ (61cm) Female to Male XLR Cable 1 x MicroUSB to USB-A Charging Cable 1 x Reusable Cable Strap 1 x User Manual 1 x Warranty Card

The AVX-ME2 SET includes a bodypack transmitter with lavalier microphone, the plug on receiver and all accessories to operate out of the box with camcorders as well as DSLR cameras. It features self configuring digital transmission which eliminates time-consuming radio frequency setup. The ultra compact receiver rotates around the XLR connector to avoid collision with other devices mounted on your camera. It switches on and off automatically with your camera - saving battery power. The AVX matches perfectly to your camera's input sensitivity without having to adjust the audio level on the microphone. From professional wedding video to documentaries, from street interviews to corporate videos, the AVX just works allowing you to concentrate on creativity. Key Features Very fast setup Plugs directly into XLR audio input Ultra compact receiver Switches on/off by P48 Phantom power Optimized dynamic range Auto frequency management AES 256 encryption License free Accessories included for DSLR use Metal housing Made in Germany Color black Frequency response 20 Hz - 20000 Hz THD, total harmonic distortion typ. 0.1 % Weight Receiver: 87 g (incl energy pack) Audio input 3,5 mm mini jack Audio output XLR Operating temperature -10 °C - + 55°C Signal-to-noise ratio > 90 dB(A) RF output power adaptive up to 250mW (peak) country specific Operating time > 4h (Receiver), typ 15 h (Transmitter with LiIon energy pack) Modulation GFSK (DECT) Audio output level -30 dBu - 0 dBu in 4 Steps Battery Specification Li-Ion 3,7 V DC Dynamic range > 120 dB(A) Frequency band 1880 - 1930 MHz (Country specific) Sampling rates 24 bit / 48 kHz Latency 19 ms What's in the Box Plug-on receiver Energy pack USB charger USB charging cable Bodypack transmitter ME 2 lavalier microphone Microphone clip Hot shoe mount Beltclip XLR to mini jack cable Pouch

Low-cut prekidač na zadnjoj strani PMIC1 eliminiše duboke bas zvukove. Koraci katkad proizvode uznemirujuće niske tutnjave koje možete čuti samo dok gledate snimke na sistemu sa sabvuferom. Ovim se prekidačem sprečava snimanje ovih zvukova. Low cut će takođeukrotiti šum buke klima uređaja i učiniti govor razumljivijim - zato razmislite o tome da ga koristite svaki put kada snimate. PMIC1 će verovatno biti najjednostavniji deo opreme koji posedujete. Da biste ga koristili, jednostavno ga pričvrstite na stopu pomoću ugrađenog držača i povežite uključeni kabl na mikrofon na fotoaparatu. Ne postoji prekidač ili taster za napajanje koji bi vas brinuo. Spremni ste za snimanje. Ugrađena stopa sadrži metalni navoj za 1/4 20 stativ za dodatne mogućnosti ugradnje. Ovaj mikrofon zvuči odlično, izgrađen je da traje i spreman je za putovanje. Imajte na umu da PMIC1 zahteva „Plug-In Power“ da bi radio. Velika većina kamera to pruža, ali na nekoliko modela to je izostavljeno. Kompaktni i lagani shotgun mikrofon visokog kvaliteta sa radom bez uključivanja i punjenja baterije Prekidač sa niskim presekom čini dijalog razumljivijim i eliminira ometajuće zvuke tutnjave Izlazni kabl je smenljiv, izlazni priključak sa gornjim izlazom je efikasan kada je montiran na vrhu vaše kamere Robusni integrisani amortizer izoluje mikrofon od vibracijskih buka i nije lagan i podložan savijanju i oštećenju Ugrađena stopa sadrži metalni 1/4 20 navoj za stativ za više opcija ugradnje, izrađen da traje i spreman za putovanje Specifikacije: Frekventni odziv: 80 Hz do 12 kHz Tip mikrofona: kondenzatorski Polarni patern: Superkardioidni Osetljivost: -32dB +/- 1dB Odnos signal-šum:70dB SPL Izlazi: 2 x ženski 1.8” (3.5 mm) TRS, 1 za slušalice, 1 za povezivanje kamere Dimenzije: 6.3 x 2.3 x 1.6" (16.2 x 5.9 x 4.1cm) Težina: 1.9 oz (55g) Uključeno: 1 x SR-PMIC1 shotgun mikrofon 1 x kratki, namotani kabl sa pozlaćenim mini konektorima 1 x vetrobran od pene

Prekidač sa niskim presekom na zadnjoj strani PMIC2 eliminiše duboke bas zvukove. Koraci mogu stvoriti uznemirujuće zvukove niske tutnjave koje čujete samo kad gledate snimke na sistemu sa sabvuferom. Niski rez će ih ukloniti, ukrotiti glas buke klima uređaja i učiniti govor razumljivijim - zato razmislite o tome da ga upotrebljavate svaki put kada snimate. PMIC2 će verovatno biti najjednostavniji deo opreme koji posedujete. Da biste ga koristili, jednostavno ga pričvrstite na cipelu fotoaparata pomoću ugrađenog držača i povežite uključeni kabl na mikrofon na fotoaparatu. Ne postoji prekidač ili taster za napajanje koji bi vas brinuo. Spremni ste za pucanje. Ugrađena stopa sadrži metalni navoj za1/4 20 stativ za dodatne mogućnosti ugradnje. Ovaj mikrofon zvuči neverovatno, ne zauzima mnogo prostora u vašoj torbi, izrađen je tako da traje i spreman je za putovanje. Imajte na umu da PMIC2 zahteva ''Plug-In Power'' da bi radio. Velika većina kamera to pruža, ali na nekoliko modela to je izostavljeno. Ekološki, kompaktan i lagan stereo mikrofon na kameri sa radom bez baterije koji snima očaravajuće ambijentalne zvuke i živa muzička izvođenja Prekidač sa niskim rezovima čini zvukove razumljivijim i eliminira smetajuće tutnjave Izlazni kabl je smenljiv, izlazni priključak sa gornjim izlaskom je efikasan kada je montiran na vrhu vaše kamere Robusna zaštitna naprava izolira mikrofon od vibracija i nije lagana i podložna savijanju i oštećenju Ugrađena stopa sadrži metalni navoj za 1/4 20 stativ za više opcija ugradnje, trajno ugrađen i spreman za putovanje Specifikacije: Frekventni odziv: 75 Hz to 15 kHz Tip mikrofona: stereo kondenzatorski Polarni patern: kardioidni Osetljivost: -40dB +/- 1dB Odnos signal-šum: 76dB SPL Izlazi: 2 x ženski 1.8” (3.5 mm) TRS, 1 za slušalice, 1 za povezivanje kamere Dimenzije: 3.8 x 2.3 x 1.6" (9.7 x 5.9 x 4.1cm) Težina: 1.8 oz (50g) Uključeno: 1 x SR-PMIC2 stereo mikrofon sa fiksnim vetrobranom 1 x kratki, namotani kabl sa pozlaćenim mini konektorima

Specifikacija Zvučnik Xplore XP8801. Prenosivi zvučnik KARAOKE XPLORE XP8801 "BLASTER" je visokokvalitetan zvučnik koji ima snažan bas efekat i savršen je pratilac za sve vaše avanture. Svojom snagom od 450V ispuniće prostor i okolinu lepim i čistim zvukom. Pronađite svoje omiljene plejliste bilo gde, od druženja kod kuće do plesnih žurki na plaži. Uključena su dva mikrofona (žični) i (bežični) tako da možete pevati svoje omiljene pesme i družiti se sa publikom. Zvučnik ima ugrađenu Bluetooth vezu tako da se možete povezati sa telefonom i tabletom. Kontrolna tabla ima kompletan set konektora - AUKS ulaz i izlaz, USB konektor i slot za SD karticu. Zvučnik ima ugrađenu TVS funkciju koja vam omogućava da bežično povežete dva identična zvučnika jedan sa drugim. Zvučnik za karaoke ima atraktivnu kontrolnu tablu sa crvenim LED ekranom i daljinski upravljač koji vam omogućava da lako daljinski podešavate funkcije. Zahvaljujući efektu plazma svetla DISCO LED LIGHT, vaša zabava će biti obasjana prelepim bojama. Noge su uključene u paket tako da se zvučnik može postaviti u horizontalni položaj (ležeći). Spremite se za nezaboravnu zabavu sa KARAOKE IKSPLORE PRENOSNIM ZVUČNIKOM! TEHNIČKE SPECIFIKACIJE: Super prenosivi zvučnik sa dva mikrofona Ugrađeni FM radio Podrška za Bluetooth reprodukciju Podrška za reprodukciju i snimanje sa USB ključa Podrška za reprodukciju Micro SD memorijske kartice Funkcija karaoke sa uključenim mikrofonima Podržani formati: MP3 i WMA Veličina zvučnika 16,5 cm (2 k 6,5''). 450 W maksimalna muzička snaga Mikrofoni: 1kom žični; 1kom bežični Ugrađena animacija DISCO LED LIGHT efekti 2 k 6,3 mm džek ulaz, za ​​povezivanje muzičkog instrumenta 1 k 3,5 mm audio AUX ulaz Podrška za TVS povezivanje (Pravi bežični stereo) Mega BASS Dodat je daljinski upravljač LED displej sa crvenim osvetljenjem Napajanje: 220 V / 13,5 V adapter Ugrađena punjiva baterija 11,1 V / 3 Ah Ugrađena ručka za lak transport Kućište od kvalitetne ABS plastike Veličina: 31 0k 290 k 600 mm Težina: 6,40 kg

MICROPHONE WITH MAXIMUM FREEDOM OF MOVEMENT ​​​​​​​The TG H34 neckworn micropohone ensures maximum freedom of movement and is therefore ideal for all free-hand applications. On stage it is very popular among singing dancers, keyboarders and drummers. Furthermore, it is also suitale for all kinds of presentations and sport lessons. ​​ NATURAL SOUND The TG H34 features easy handling, a natural sound and optimal fit. The Supercardioid polar pattern provides a high gain before feedback. The flexible gooseneck allows optimally positioning. TG PIN OUT The "TG" version works on pocket transmitters from the Unite series and from the TG series, like -100, -500 or -1000. If the microphone is used wired, the "MA PVA" power converter is necessary, it converts the necessary phantom power from the microphone input into an audio wire power supply required by the microphone. OPUS PIN OUT The "Opus" version works with pocket transmitters from the various Opus radio series such as -300, -500, -600, -800, -900 and -910. For wired connection to a microphone input with phantom power the "CV 18" power supply is required. "Opus" and "TG" versions are electrically incompatible. TOURING GEAR THE BEST LIVE MICROPHONE SERIES WE'VE EVER BUILT. Touring Gear - a series of live microphones that are set to excite performers in studios and on stages all over the world. Rugged in design with phenomenal audio quality, they are the perfect complement to beyerdynamic's legendary M series models, including well-known classics such as the M 88 and M 160. TECHNICAL SPECIFICATIONS Transducer type . . . . . . . . . . . . . . . . Condenser (back electret) Operating principle . . . . . . . . . . . . . Pressure gradient Polar pattern . . . . . . . . . . . . . . . . . . Supercardioid Frequency response: Close miking . . . . . . . . . . . . . . . . . 20 - 13,000 Hz Distant miking (measured at 1 m) . . . 180 - 13,000 Hz Open circuit voltage . . . . . . . . . . . . . 6.0 mV/Pa (-44.5 dBV)* ±3 dB Nominal impedance . . . . . . . . . . . . . approx. 700 Ω Load impedance. . . . . . . . . . . . . . . . > 3.5 kΩ Max. SPL at 1 kHz . . . . . . . . . . . . . . 119 dB* Equivalent SPL . . . . . . . . . . . . . . . . . 31.5 dB SPL* Power supply . . . . . . . . . . . . . . . . . . Direct current 1.5 - 9 V Max. power consumption . . . . . . . . 780 μA Connector . . . . . . . . . . . . . . . . . . . . Mini-XLR, 4-pin, female Dimensions: Diameter . . . . . . . . . . . . . . . . . . . . 15 mm Length microphone boom. . . . . . . 95 mm Weight. . . . . . . . . . . . . . . . . . . . . . . 36 g

The Saramonic SoundBird T3L is a professional long shotgun microphone with the advanced technology and sound quality of the SoundBirdT3 in a longer body with more focused directionality and off-axis rejection. It delivers clear, focused, broadcast-quality sound and provides a comprehensive set of includes a suite of vital, must-have accessories. The all-brass construction is extremely durable and helps to reduce radio frequency interference. Its long interference tube and ultra-low noise circuitry delivers natural on- and off-axis sound in any environment. The gold-plated XLR output provides the best possible signal transfer and resists corrosion. The SoundBird T3L is powered by either +48 volts Phantom Power or its internal rechargeable Li-Ion battery which provides power for up to 150-hours. At 15.5” the SoundBird T3L is the ideal size for use on a boom pole or stand, but also is capable of camera mounting for professional film and television productions. Features and Controls to Tailor Your Sound Several built-in controls let you tailor the shotgun’s performance to your needs and achieve the best possible sound quality in a variety of situations. Two selectable High-Pass Filters (75 and 150Hz) eliminate distracting deep bass frequencies like the rumble from HVAC, footsteps and traffic noise that can ruin a recording. A +6dB High-Frequency Boost compensates for frequencies that are lost when you use furry wind protection or in a blimp and increases vocal intelligibility when using only a foam windscreen. A -10dB Pad makes it possible to capture loud sounds without clipping. All of the buttons are illuminated so you can easily see the settings, and an On/Off button changes color based on power source and with a double press of the power button, the 5 button indicators show remaining battery power of Li-Ion battery. To ensure you can begin filming quickly even after you turn the mic off, all of your settings are saved when you turn the mic back on. All Vital Accessories are Included You will need many accessories to use your shotgun microphone properly, and instead of making additional purchases, all of these accessories are all included with SoundBird T3L. You get an SR-SMC3 premium shock mount with 4x replacement bands and a SR-SMC1 mic clip stand mount, allowing you to mount the T3L to boom poles, stands or even shoe mounts of a camera. Both feature 1/4”-20, 3/8”, 5/8” and cold-shoe mounts, allowing you to mount the T3L into any set-up or filming rig. You also get a 1.9-foot (60cm) XLR output cable, a foam windscreen, and a Micro-USB charging cable. You will have all of the essentials for capturing the best possible sound quality for your productions and be ready to start recording, right out of the box. Advanced 15.5” long supercardioid shotgun microphone, ideal for professional film production that delivers clear, broadcast-quality sound with focused directionality, excellent off-axis rejection 2x High-Pass filters (75 & 150Hz) eliminate unwanted low-frequency noise & rumble, a +6dB High-Frequency Boost adds highs lost with windscreens & increases vocal intelligibility, and a -10dB Pad Powered by +48v Phantom Power or built-in Li-Ion battery with 150-hour run-time, illuminated settings & On/Off button that indicates remaining battery power level when double pressed Includes must-have accessories: Premium Shock Mount with Replacement Bands, a Mic Clip and Stand Mount, Foam Windscreen, and a 1.9-foot (60cm) XLR Cable Durable solid brass construction prevents radio-frequency interference, gold-plated XLR connector resists corrosion and provides the best possible signal transfer Acoustic Principle: Line Gradient Polar Pattern: Supercardioid Frequency Range: 35Hz to 20kHz Sensitivity: -36±3dB (0dB=1V/Pa,at 1KHz) 1.5V 2.2k Output Impedance: 150 Ohm Maximum Output: 10dBu (at 1kHz,1%THD into 1k Ohm) Dynamic Range: 125dB (per IEC651) Maximum SPL: 110dB Signal-to-Noise Ratio: 80dB SPL (per IEC651) High-Pass Filters: 75Hz and 150Hz Pad: -10dB High Frequency Boost: +6dB Material: Brass Power Requirements: +48V Phantom Power or Built-in Lithium Battery Battery Life: 150 Hours Output Connection: 3-pin XLR, Balanced Output Between Pin 2 (+), Pin 3 (-) and Pin 1 (Ground) Diameter: 0.91” (2.3cm) Length: 15.5” (39.5cm) Weight: 7.83oz (222g) 1 x SoundBird T3L Shotgun Microphone 1 x SR-SMC3 Premium Adjustable Shock Mount 4 x Replacement Shock Mount Bands 1 x SR-SMC1 Mic Clip and Stand Mount 1 x Foam Windscreen 1 x 1.9’ (60cm) Female to Male XLR Cable 1 x Micro-USB to USB-A Charging Cable 1 x User Manual 1 x Warranty Card

The SoundBird V1 can be powered via a AA battery or +48V phantom power supplied from an XLR-equipped camera or recorder. At 10.7", the SoundBird V1 is well suited for use mounted on a camera shoe, boompole, or stand (using the included shockmount). The mic comes with a protective foam windscreen and can benefit from the Saramonic TM-WS1 furry windshield (available separately) when recording in high-wind environments. Optimize Your Sound in Various Situations A low-cut button helps eliminate unwanted low rumble coming from HVAC, footsteps, or traffic noise. A -10 dB pad allows you to capture loud sounds without clipping. All the buttons are illuminated so you can easily see the settings, and an On/Off button changes color based on the power source and battery level. Your settings are saved when you turn the mic On and Off. Other Features The durable solid brass construction prevents radio-frequency interference. The gold-plated XLR connector resists corrosion to ensure a clean signal. Includes a shockmount to attach mic to cameras or boompoles, a foam windscreen, and an XLR output cable (2'). In the Box Saramonic SoundBird V1 Shotgun Microphone (Battery, Phantom) SR-SMC2 Adjustable Shockmount 4 x Replacement Shockmount Bands Foam Windscreen XLR Mic Cable (2') Limited 1-Year Warranty Saramonic SOUNDBIRDV1 Specs Microphone Form Factor Camera-Mount Sound Field Mono Capsule 1 x Electret Condenser Polar Pattern Supercardioid Orientation End Address Pad -10 dB High-Pass Filter 200 Hz Gain Adjustment None Indicators 1 x Blue/Green/Red Single LED (Phantom Power, Power, Status) On-Board Controls High-Pass Filter, Pad Windscreen Foam (Included) Performance Frequency Range 50 Hz to 20 kHz Maximum SPL 132 dB SPL (1 kHz, 1% THD) Sensitivity -32 dB at 1 kHz Signal-to-Noise Ratio 80 dB SPL Connectivity Output Connectors (Analog) 1 x XLR 3-Pin Female (Locking, on Mic) Power Operating Voltage 48 V (Battery Power, Phantom Power) Battery Type 1 x AA (Not Included) Physical Mounting Shockmount Included Case None Construction Material Brass Dimensions ø: 0.79 x L: 10.71" / ø: 2.01 x L: 27.2 cm Weight 6.88 oz / 195 g Packaging Info Package Weight 1.35 lb Box Dimensions (LxWxH) 13.3 x 6.5 x 2.65"

NATURAL SOUND The TG H34 features easy handling, a natural sound and optimal fit. The Supercardioid polar pattern provides a high gain before feedback. The flexible gooseneck allows optimally positioning. TG PIN OUT The "TG" version works on pocket transmitters from the TG series, like -100, -500 or -1000. If the microphone is used wired, the "MA PVA" power converter is necessary, it converts the necessary phantom power from the microphone input into an audio wire power supply required by the microphone. OPUS PIN OUT The "Opus" version works with pocket transmitters from the various Opus radio series such as -300, -500, -600, -800, -900 and -910. For wired connection to a microphone input with phantom power the "CV 18" power supply is required. "Opus" and "TG" versions are electrically incompatible. ACCESSORIES CV 18 Phantom power adaptor for microphones with Opus pin out and 4pin mini-XLR plug to connect to phantom powered mic-input MA-PVA Phantom power adaptor with mini-XLR 4pin input TG H34 Neckworn microphone FEATURES Supercardioid polar pattern High gain before feedback Lightweight, adjustable neckband Flexible gooseneck for optimal positioning Rugged “flexible” ear hooks APPLICATIONS The TG H34 neckworn microphone ensures maximum freedom of movement and is therefore ideal for all free-hand applications. On stage it is very popular amoung singing dancers, keyboarders or drummers. Furthermore, it is also suitable for all kinds of presentations and sports lessons. The TG H34 features easy handling, a natural sound and optimal fit. The supercardioid polar pattern provides a high gain before feedback. The flexible gooseneck allows optimally positioning the microphone and a wind shield integrated in the microphone reduces wind and popping noise. The TG H34 is supplied with an additional foam wind shield. The TG H34 microphone is available in two versions: as Opus version it can be connected to the Opus series beltpack transmitters; as TG version it can be used with the wireless microphone systems of the TG series. For wired applications with phantom power sources the TG H34 must be used with an optional power adapter. VERSIONS TG H34 (Opus) Neckworn microphone, condenser (back electret), supercardioid, black, supplied with foam wind shield, with 4-pin female Mini-XLR connector . . . . . . . . Order # 706.396 TG H34 (TG) Neckworn microphone, condenser (back electret), supercardioid, black, supplied with foam wind shield, with 4-pin female Mini-XLR connector . . . . . . . . Order # 706.477 1 of 2 TECHNICAL SPECIFICATIONS Transducer type . . . . . . . . . . . . . . . . Condenser (back electret) Operating principle . . . . . . . . . . . . . Pressure gradient Polar pattern . . . . . . . . . . . . . . . . . . Supercardioid Frequency response: Close miking. . . . . . . . . . . . . . . . . 20 - 13,000 Hz Distant miking (measured at 1 m) . . . 180 - 13,000 Hz Open circuit voltage. . . . . . . . . . . . . 6.0 mV/Pa (-44.5 dBV)* ±3 dB Nominal impedance . . . . . . . . . . . . . approx. 700 Ω Load impedance. . . . . . . . . . . . . . . . > 3.5 kΩ Max. SPL at 1 kHz . . . . . . . . . . . . . . 119 dB* Equivalent SPL . . . . . . . . . . . . . . . . . 31.5 dB SPL* Power supply . . . . . . . . . . . . . . . . . . Direct current 1.5 - 9 V Max. power consumption . . . . . . . . 780 µA Connector . . . . . . . . . . . . . . . . . . . . Mini-XLR, 4-pin, female Dimensions: Diameter. . . . . . . . . . . . . . . . . . . . 15 mm Length microphone boom. . . . . . . 95 mm Weight. . . . . . . . . . . . . . . . . . . . . . . 36 g *measured with a supply voltage of U = 5 V DC and a load resistance of 2.2 kΩ OPTIONAL ACCESSORY CV 18 Power adapter to connect to phantom-powered microphone inputs, for microphones with Opus pin assignment . . . . . . . . . Order # 475.378 MA-PVA Power adapter to connect to phantom-powered microphone inputs, for microphones with TG pin assignment. . . . . . . . . . . Order # 711.098

Equally straightforward and small, the Blink 500 B4 gives you everything necessary for recording crisp, clear speech in any location. You get two clip-on transmitters—each with a built-in microphone and a clip-on omni lavalier mic, a dual-channel receiver that plugs directly into your device, and the requisite charging cables for the transmitters. Whether you're a run-and-gun videographer, a YouTube content creator, or an avid vlogger, the Blink 500 B4 can get your wireless audio going in no time. Unpacking the Blink 500 B4 Use each ultracompact clip-on transmitter as a true wireless microphone with its built-in mic element, or as a bodypack transmitter with its supplied clip-on lavalier microphone. The ultracompact dual-channel receiver plugs directly into your iOS device's Lightning port, letting it work seamlessly with your iPhone or iPad—no batteries, cables, or clips required. Simply plug in the receiver and power on the transmitters to access reliable wireless audio functionality in an instant. Connect, Power, and Go With the receiver and transmitters paired at the factory, the Blink 500 system is comfortably easy to use for anyone, anywhere. Videographers, vloggers, YouTubers, and mobile journalists will benefit from the Blink 500's power-and-go operating style. Advanced technology invisibly handles the complicated tasks such as switching channels to avoid dropouts, leaving you with a streamlined and simple system that requires no menu diving or tedious manual configuration. Quality Sound Blink 500 systems utilize 24-bit / 48 kHz resolution—the same audio standard used worldwide by sound engineers in the film industry—to give you quality sound at a budget-friendly price point. Compared to the built-in microphones on cameras and mobile devices, Blink 500 systems offer considerably improved fidelity and clarity with less noise. Since your subjects may speak at very different volumes, Saramonic outfitted the Blink 500 TX with dedicated gain buttons to allow quick and effortless adjustment of the signal level. You can even turn the volume all the way down to effectively mute the transmitter. By connecting directly to your device's Lightning port, the Blink 500 RXDi avoids unnecessary D/A and A/D conversion to maintain the integrity of the digital signal from your transmitter all the way to your recording device. Perfect for 1- or 2-Person Shoots Since the Blink 500 RXDi is a dual-channel receiver, it can simultaneously handle both Blink 500 TX wireless transmitters. If you need to expand beyond that, you can use up to 18 Blink 500 systems at once to accommodate up to 36 wireless microphones. Each Blink 500 system can include one dual-channel receiver and up to two transmitters. Choose from camera-mount (Blink 500 RX), Lightning (Blink 500 RXDi), or USB Type-C (Blink 500 RXUC) receivers. Built-In Microphone for True Wireless Operation The Blink 500 TX features a built-in miniature condenser microphone with an omni pickup pattern that captures clear and natural voice tonality. Thanks to the transmitter's ultracompact housing, you can clip it to clothing, slide it into a shirt pocket, place it on a podium, or hold it in your hand. Lavalier Microphone Included For maximum visual discretion, use the Blink 500 TX as traditional bodypack transmitter with the supplied lavalier microphone. Just clip the omni lav mic to a collar or lapel, then plug it into the transmitter's 3.5mm input; the transmitter automatically switches to the external microphone so you don't have to bother selecting the input source. The lavalier mic includes a foam windscreen that lessens noise caused by light wind, breaths, and air conditioning systems. For enhanced reduction of stronger wind noise, a separately available furry windshield (a.k.a. windjammer) such as the Saramonic LM-WS can be fitted to the microphone. Stable and Simple 2.4 GHz Digital Wireless Whereas typical analog wireless systems are susceptible to interference from TV and radio waves, the Blink 500 digital system avoids that by operating in the 2.4 GHz band, which occupies frequencies beyond those of television, radio transmissions, and UHF wireless microphone systems. Within the 2.4 GHz spectrum, the Blink 500 boasts automatic channel hopping to mitigate noise and dropouts at a line-of-sight distance of up to 164 feet. For optimal performance, environments with limited Wi-Fi / 2.4 GHz traffic and minimal physical obstructions are recommended. Ready for Anywhere Don’t be concerned about licensing or selecting frequencies; the Blink 500 system uses the license-free 2.4 GHz band, so you can go anywhere in the world and have a reliable, fully functional wireless system. Other Features Lightweight, ultracompact housings Slim plug-in receiver won't interfere with the operation of a gimbal MFi-certified Apple Lightning male connector plugs directly into your device's Lightning port Works with iPhones and iPads equipped with Lightning ports Receiver requires no battery or charging Transmitter's intelligent LED indicators show power, audio level, low-battery level, and charging status Transmitter's internal 5-hour battery keeps you going on long shoots or multiple run-and-gun gigs in a day Power the transmitter or recharge its internal lithium-ion battery via a USB Type-C connection (charging cables included) Use up to two transmitters with each receiver Operate up to 18 systems simultaneously in the same environment Saramonic B4 Specs System Wireless Technology Digital 2.4 GHz Number of RF Channel Frequencies 18 Included Transmitters 2 x Clip-On with Microphone Diversity Non-Diversity RF Frequency Band 2400 to 2483.5 MHz RF Bandwidth Up to 83.5 MHz Max Operating Range 164' / 50 m (Line of Sight) 98.4' / 30 m (with Obstruction) Max Transmitters per Band 18 Sample Rate/Resolution 48 kHz / 24-Bit Latency 12 ms Encryption None Modulation GFSK Receiver Receiver Type Plug-In Mounting Options Plug-In Antenna 1 x 1/4 Wave Wire, Fixed Number of Audio Channels 2 Audio I/O 1 x 1/8" / 3.5 mm TRS Female Unbalanced Line Output Audio Output Level 5 dB Frequency Response 20 Hz to 16 kHz USB/Lightning Connectivity 1 x Lightning (Audio, Bus Power) Power Requirements Bus Power (Lightning) Display & Indicators 1 x LED (Power, Sync) Housing ABS, Plastic Operating Temperature 32 to 122°F / 0 to 50°C Storage Temperature -4 to 122°F / -20 to 50°C Dimensions 3 x 0.7 x 0.4" / 7.6 x 1.7 x 1.1 cm Weight 0.4 oz / 10 g Transmitter Transmitter Type Clip-On with Microphone RF Output Power 10 mW Audio I/O 1 x 1/8" / 3.5 mm TRS Female Unbalanced Input Plug-In Power 1 V Pad None Muting None Audio Input Level -42 to -30 dBV (at 0 dB Gain) Gain Range +11 to +25 dB (7 dB Steps) Signal Processing None Frequency Response 20 Hz to 16 kHz Sync Method IR Antenna 1 x 1/4 Wave Wire, Fixed Power Requirements Battery or Bus Power (USB) Battery Type 1 x Built-In Rechargeable (Included, Not Replaceable) Internal Battery Capacity 400 mAh Battery Charging Time 1.5 to 2.5 Hours Approx. Battery Life 5 Hours USB/Lightning Connectivity 1 x USB-C (Bus Power, Charging) Display & Indicators 4 x LED (Audio Level, Power) 1 x LED (Battery Status) 1 x LED (Recharging) Housing ABS, Plastic Operating Temperature 32 to 122°F / 0 to 50°C Storage Temperature -4 to 122°F / -20 to 50°C Dimensions 2.5 x 1.7 x 0.7" / 6.3 x 4.3 x 1.7 cm Weight 1.2 oz / 34 g Microphone Microphone Type Lavalier Color Black Sound Field Mono Operating Principle Pressure Operated Capsule Electret Condenser Polar Pattern Omnidirectional Frequency Range 50 Hz to 18 kHz Equivalent Noise Level 58 dB Maximum SPL 110 dB SPL Sensitivity -30 dB Output Connectors 1 x 1/8" / 3.5 mm TRS Male Unbalanced Cable Length 4' / 1.22 m Operating Voltage 1 V Packaging Info Package Weight 0.815 lb Box Dimensions (LxWxH) 17.25 x 7.2 x 2.05"

The Blink 500 B6 delivers considerably improved sound quality compared to the built-in mics on cameras and mobile devices while functioning as an ultracompact digital system that provides immediate out-of-the-box operability for anyone, making it ideal for video, podcast, and mobile journalism applications. Once it's plugged in and powered on, it's set and ready so your focus can stay on your content. Equally straightforward and small, the Blink 500 B6 gives you everything necessary for recording crisp, clear speech in any location. You get two clip-on transmitters—each with a built-in microphone and a clip-on omni lavalier mic, a dual-channel receiver that plugs directly into your device, and the requisite charging cables for the transmitters. Whether you're a run-and-gun videographer, a YouTube content creator, or an avid vlogger, the Blink 500 B6 can get your wireless audio going in no time. Unpacking the Blink 500 B6 Use each ultracompact clip-on transmitter as a true wireless microphone with its built-in mic element, or as a bodypack transmitter with its supplied clip-on lavalier microphone. The ultracompact dual-channel receiver plugs directly into your device's USB Type-C port, letting it work seamlessly with Android mobile devices and Mac/Windows computers equipped with USB Type-C ports—no batteries, cables, or clips required. Simply plug in the receiver and power on the transmitters to access reliable wireless audio functionality in an instant. Connect, Power, and Go With the receiver and transmitters paired at the factory, the Blink 500 system is comfortably easy to use for anyone, anywhere. Videographers, vloggers, YouTubers, and mobile journalists will benefit from the Blink 500's power-and-go operating style. Advanced technology invisibly handles the complicated tasks such as switching channels to avoid dropouts, leaving you with a streamlined and simple system that requires no menu diving or tedious manual configuration. Quality Sound Blink 500 systems utilize 24-bit / 48 kHz resolution—the same audio standard used worldwide by sound engineers in the film industry—to give you quality sound at a budget-friendly price point. Compared to the built-in microphones on cameras and mobile devices, Blink 500 systems offer considerably improved fidelity and clarity with less noise. Since your subjects may speak at very different volumes, Saramonic outfitted the Blink 500 TX with dedicated gain buttons to allow quick and effortless adjustment of the signal level. You can even turn the volume all the way down to effectively mute the transmitter. By connecting directly to your device's USB Type-C port, the Blink 500 RXUC avoids unnecessary D/A and A/D conversion to maintain the integrity of the digital signal from your transmitter all the way to your recording device. Perfect for 1- or 2-Person Shoots Since the Blink 500 RXUC is a dual-channel receiver, it can simultaneously handle both Blink 500 TX wireless transmitters. If you need to expand beyond that, you can use up to 18 Blink 500 systems at once to accommodate up to 36 wireless microphones. Each Blink 500 system can include one dual-channel receiver and up to two transmitters. Choose from camera-mount (Blink 500 RX), Lightning (Blink 500 RXDi), or USB Type-C (Blink 500 RXUC) receivers. Built-In Microphone for True Wireless Operation The Blink 500 TX features a built-in miniature condenser microphone with an omni pickup pattern that captures clear and natural voice tonality. Thanks to the transmitter's ultracompact housing, you can clip it to clothing, slide it into a shirt pocket, place it on a podium, or hold it in your hand. Lavalier Microphone Included For maximum visual discretion, use the Blink 500 TX as traditional bodypack transmitter with the supplied lavalier microphone. Just clip the omni lav mic to a collar or lapel, then plug it into the transmitter's 3.5mm input; the transmitter automatically switches to the external microphone so you don't have to bother selecting the input source. The lavalier mic includes a foam windscreen that lessens noise caused by light wind, breaths, and air conditioning systems. For enhanced reduction of stronger wind noise, a separately available furry windshield (a.k.a. windjammer) such as the Saramonic LM-WS can be fitted to the microphone. Stable and Simple 2.4 GHz Digital Wireless Whereas typical analog wireless systems are susceptible to interference from TV and radio waves, the Blink 500 digital system avoids that by operating in the 2.4 GHz band, which occupies frequencies beyond those of television, radio transmissions, and UHF wireless microphone systems. Within the 2.4 GHz spectrum, the Blink 500 boasts automatic channel hopping to mitigate noise and dropouts at a line-of-sight distance of up to 164 feet. For optimal performance, environments with limited Wi-Fi / 2.4 GHz traffic and minimal physical obstructions are recommended. Ready for Anywhere Don’t be concerned about licensing or selecting frequencies; the Blink 500 system uses the license-free 2.4 GHz band, so you can go anywhere in the world and have a reliable, fully functional wireless system. Other Features Lightweight, ultracompact housings Slim plug-in receiver won't interfere with the operation of a gimbal USB Type-C male connector plugs directly into your device's USB Type-C port Works with Android devices and Mac/Windows computers equipped with USB Type-C ports Receiver requires no battery or charging Transmitter's intelligent LED indicators show power, audio level, low-battery level, and charging status Transmitter's internal 5-hour battery keeps you going on long shoots or multiple run-and-gun gigs in a day Power the transmitter or recharge its internal lithium-ion battery via a USB Type-C connection (charging cables included) Use up to two transmitters with each receiver Operate up to 18 systems simultaneously in the same environment Saramonic B6 Specs System Wireless Technology Digital 2.4 GHz Number of RF Channel Frequencies 18 Included Transmitters 1 x Clip-On with Microphone Diversity Non-Diversity RF Frequency Band 2400 to 2483.5 MHz RF Bandwidth Up to 83.5 MHz Max Operating Range 164' / 50 m (Line of Sight) 98.4' / 30 m (with Obstruction) Max Transmitters per Band 18 Sample Rate/Resolution 48 kHz / 24-Bit Latency 12 ms Encryption None Modulation GFSK Receiver Receiver Type Plug-In Mounting Options Plug-In Antenna 1 x 1/4 Wave Wire, Fixed Number of Audio Channels 2 Audio I/O 1 x 1/8" / 3.5 mm TRS Female Unbalanced Line Output Audio Output Level 5 dB Frequency Response 20 Hz to 16 kHz Network I/O None Word Clock I/O None USB/Lightning Connectivity 1 x USB-C (Audio, Bus Power) Power Requirements Bus Power (USB) Display & Indicators 1 x LED (Power, Sync) Housing ABS, Plastic Operating Temperature 32 to 122°F / 0 to 50°C Storage Temperature -4 to 122°F / -20 to 50°C Dimensions 3 x 0.7 x 0.4" / 7.6 x 1.7 x 1.1 cm Weight 0.4 oz / 10 g Transmitter Transmitter Type Clip-On with Microphone RF Output Power 10 mW Audio I/O 1 x 1/8" / 3.5 mm TRS Female Unbalanced Input Plug-In Power 1 V Pad None Muting None Audio Input Level -42 to -30 dBV (at 0 dB Gain) Gain Range +11 to +25 dB (7 dB Steps) Signal Processing None Frequency Response 20 Hz to 16 kHz Sync Method IR Antenna 1 x 1/4 Wave Wire, Fixed Power Requirements Battery or Bus Power (USB) Battery Type 1 x Built-In Rechargeable (Included, Not Replaceable) Internal Battery Capacity 400 mAh Battery Charging Time 1.5 to 2.5 Hours Approx. Battery Life 5 Hours USB/Lightning Connectivity 1 x USB-C (Bus Power, Charging) Display & Indicators 4 x LED (Audio Level, Power) 1 x LED (Battery Status) 1 x LED (Recharging) Housing ABS, Plastic Operating Temperature 32 to 122°F / 0 to 50°C Storage Temperature -4 to 122°F / -20 to 50°C Dimensions 2.5 x 1.7 x 0.7" / 6.3 x 4.3 x 1.7 cm Weight 1.2 oz / 34 g Microphone Microphone Type Lavalier Color Black Sound Field Mono Operating Principle Pressure Operated Capsule Electret Condenser Polar Pattern Omnidirectional Frequency Range 50 Hz to 18 kHz Equivalent Noise Level 58 dB Maximum SPL 110 dB SPL Sensitivity -30 dB Output Connectors 1 x 1/8" / 3.5 mm TRS Male Unbalanced Cable Length 4' / 1.22 m Operating Voltage 1 V Microphone 2 Microphone Type Integrated Sound Field Mono Operating Principle Pressure Operated Capsule Electret Condenser Polar Pattern Omnidirectional Frequency Range 50 Hz to 18 kHz Equivalent Noise Level 58 dB Maximum SPL 120 dB SPL Sensitivity -42 dB Packaging Info Package Weight 0.79 lb Box Dimensions (LxWxH) 17.55 x 11.5 x 2.1"