Table microphone stand with microphone holder

Pickguard, Jocker bass, 3 ply, black, standard

Pickguard, Stallion, 3 ply, black, standard, SSS, 3 pot holes, 3-5 switch

Bridge for e-guitar, "tune'o matic", chrome, stud spacing 74,0mm, stud diam 6,0mm

Tailpiece guitar, LP-model, black, with studs and anchors

Bridge for e-guitar, roller bridge model, with studs, chrome

Bridge for e-guitar, “tune’o matic”, stud spacing 74,0mm, with studs, stud diam 6,0mm, gold

Bridge for e-guitar, “tune’o matic”, stud spacing 74,0mm, with studs, stud diam 4,0mm, nickel

Bridge for e-guitar, “tune’o matic”, stud spacing 74,0mm, with studs, stud diam 6,0mm, nickel

Pickguard, LP-model, 3 ply, black, standard

Vintage kobilica za Jazz i Precision bass giatare. U cenu je uključen imbus ključ za podešavanje sedla. Bez šrafova za drvo.

Wilkinson tremolo crna boja za stratocaster oblik i model gitara sa 6 rupa - 10,8mm, chrome, sa kompletnim šarafima, napravljen od cinka

Pickguard, LP model, 1ply, black.

Troslojna maska (pickguard) za strat gitare, crne boje, 11 rupa za montažu, SSH, 3 rupe za potenciometre, usek za preklopnik.

Specijalni bešumni Kabl zamenjen za spajanje mikrofona, okarakterisan sa visokim zvučnim performansama na bilo kojoj frekvenciji i sa vrlo malom distorzijom signala. Izražena cena se odnosi na 1 metar.

Opis Pickguard za SG tip gitare Troslojni Boja: crna Slojevi: crni-beli-crni

Konektor Neutrik NC3FXS je tropolni ženski XLR konektor sa prekidačem vrhunskog evropskog kvaliteta firme Neutrik. Ovakvi konektori su pravi izazov za znalce jer su faktički neuništivi. Sa ovim konektorom možete uključivati i isključivati neki uređeaj ili mikrofon koji nema prekidač na sebi. Built in noiseless ON-OFF switch short-circuiting contacts 2 + 3 For use on a microphone without switch Rugged zinc diecast shell, long lasting and durable Rugged metal boot Chuck type strain relief system for secure clamping of cables Boot with rubber gland gives high protection against bending stresses

Boston T-70-B tailpiece za gitare u LP postavci. Standardni razmak rupa, u kompletu sa podešavajućim nosačima. U crnoj boji.

Opis proizvoda: The 635N/D-B has the same “hammer-like” toughness and classic performance and reputation as the 635A with the added benefit of increased output from its neodymium magnet structure. Case Material Steel Connector Type 3-pin XLR Diameter (Max) 36 mm (1.42") Element Dynamic Finish Non-reflective black Frequency Response 80 - 13,000 Hz Impedance, Low-Z balanced 150 Ω Mic Type Handheld Open Circuit Voltage 2.8 mV/Pascal Polar Pattern Omni Power Requirement Passive Wired/Wireless Wired Height 151 mm (5.94") Weight Net 6 oz (170 g)

B&C Zvučnik 10HPL64 : B&C 10HPL64 10" 200W 8 Ohms Neodymium Loudspeaker Driver (Faston) Specifications Nominal diameter 250 mm (10.0 in) Nominal impedance 8 ohms Minimum impedance 6.2 ohms Nominal power handling 200 W Continuous power handling 400 W Sensitivity (1W/1m) 99.0 dB Frequency range 60 - 4000 Hz Voice coil diameter 64 mm Winding material Aluminium Former material Glass Fibre Winding depth 12 mm Magnetic gap depth 8 mm Flux density 1.25 T Design Surround shape Double Roll Cone shape Exponential Magnet material Neodymium Inside Slug Spider Single Pole design Straight Pole Woofer cone treatment None Recommended enclosure 26.0 dm3 Recommended tuning 67 Hz Parameters Fs 61 Hz Re 5.4 ohms Qes 0.33 Qms 4.5 Qts 0.31 Vas 32.0 dm3 Sd 320.0 cm2 Reference efficiency 2.5 % Xmax 4.0 mm Xvar 5.5 mm Mms 29 g Bl 15.0 Txm Le 0.5 mH EBP 184 Hz Mounting and Shipping Info Overall diameter 261 mm Bolt circle diameter 245 mm Baffle cutout diameter 230.0 mm Depth 122 mm Flange and gasket thickness 13 mm Air volume occupied by driver 1.5 dm3 Net weight 2.0 kg Shipping weight 2.6 kg Shipping box 270x270x150 mm

B&C Zvučnik 6PEV13 : B&C 6PEV13 6" 120W 8 Ohm Loudspeaker Driver Specifications: Nominal diameter 170 mm (6.5 in) Nominal impedance 8 ohms Minimum impedance 6.0 ohms Nominal power handling 120 W Continuous power handling 240 W Sensitivity (1W/1m) 99.0 dB Frequency range 150 - 8000 Hz Voice coil diameter 38 mm (1.5 in) Winding material Aluminium Former material Glass Fibre Winding depth 7 mm Magnetic gap depth 6 mm Flux density 1.4 T Design: Surround shape Flat Cone shape Exponential Magnet material Ferrite Spider Single Pole design Straight Pole Woofer cone treatment None Parameters: Fs 126 Hz Re 5.2 ohms Qes 0.39 Qms 4.6 Qts 0.36 Vas 6.0 dm3 Sd 132.0 cm2 Reference efficiency 3.0 % Xmax 2.5 mm Xvar 1.5 mm Mms 6 g Bl 8.2 Txm Le 0.6 mH EBP 323 Hz Mounting And Shipping Info: Overall diameter 187 mm Bolt circle diameter 172 mm Baffle cutout diameter 145.0 mm Depth 78 mm Flange and gasket thickness 11 mm Air volume occupied by driver 0.8 dm3 Net weight 2.4 kg Shipping weight 10.9 kg Shipping box 215x215x135 mm Recone Kit RCK06PEV138

B&C Zvučnik 10NDL64 : B&C 10NDL64 10" 250W 8 Ohm Neodymium Loudspeaker Driver Specifications Nominal diameter 250 mm (10.0 in) Nominal impedance 8 ohms Minimum impedance 7.0 ohms Nominal power handling 250 W Continuous power handling 500 W Sensitivity (1W/1m) 97.0 dB Frequency range 50 - 3000 Hz Voice coil diameter 64 mm Winding material Aluminium Former material Glass Fibre Winding depth 14 mm Magnetic gap depth 8 mm Flux density 1.25 T Design Surround shape Double Roll Cone shape Exponential Magnet material Neodymium Inside Slug Spider Single Pole design Straight Pole Woofer cone treatment TWP Waterproof Both Sides Recommended enclosure 26.0 dm3 Recommended tuning 62 Hz Parameters Fs 56 Hz Re 5.7 ohms Qes 0.29 Qms 3.4 Qts 0.26 Vas 31.0 dm3 Sd 320.0 cm2 Reference efficiency 1.8 % Xmax 6.0 mm Xvar 7.0 mm Mms 37 g Bl 16.2 Txm Le 0.9 mH EBP 193 Hz Mounting and Shipping Info Overall diameter 261 mm Bolt circle diameter 245 mm Baffle cutout diameter 230.0 mm Depth 113 mm Flange and gasket thickness 13 mm Air volume occupied by driver 1.5 dm3 Net weight 2.9 kg Shipping weight 3.5 kg Shipping box 330x330x160 mm

B&C Zvučnik 5FG44 : B&C 5FG44 5" 100W 8 Ohm Loudspeaker Driver Specifications: Nominal diameter 127 mm (5.0 in) Nominal impedance 8 ohms Minimum impedance 6.5 ohms Nominal power handling 100 W Continuous power handling 200 W Sensitivity (1W/1m) 92.0 dB Frequency range 63 - 6000 Hz Voice coil diameter 44 mm (1.7 in) Winding material Copper Former material Kapton Winding depth 9 mm (0.35 in) Magnetic gap depth 6 mm (0.25 in) Flux density 1.1 T Design: Surround shape Roll Cone shape Exponential Magnet material Ferrite Spider Single Pole design T-Pole Woofer cone treatment WP Waterproof Front Side Recommended enclosure 5.0 dm3 (0.17 ft3) Recommended tuning 70 Hz Parameters: Fs 63 Hz Re 5.8 Qes 0.3 Qms 10.0 Qts 0.27 Vas 6.3 dm3 Sd 95.0 cm2 Reference Efficiency 0.55 % Xmax 3.0 mm Xvar 5.0 mm Mms 12 g Bl 10.0 Txm Le 0.8 mH EBP 210 Hz Mounting And Shipping Info: Overall diameter 135 mm Bolt circle diameter 142 mm Baffle cutout diameter 122.0 mm Depth 77 mm Flange and gasket thickness 9 mm Air volume occupied by driver 0.5 dm3 Net weight 1.6 kg Shipping weight 1.85 kg Shipping box 221x214x130 mm

B&C Zvučnik 6MD38 : B&C 6MD38 6" 120W 8 Ohms Loudspeaker Driver Specifications: Nominal diameter 170 mm (6.5 in) Nominal impedance 8 ohms Minimum impedance 6.5 ohms Nominal power handling 120 W Continuous power handling 240 W Sensitivity (1W/1m) 96.0 dB Frequency range 150 - 6000 Hz Voice coil diameter 38 mm Winding material Aluminium Former material Glass Fibre Winding depth 9 mm Magnetic gap depth 6 mm Flux density 1.4 T Design: Surround shape Triple Roll Cone shape Exponential Magnet material Ferrite Spider Single Pole design T-Pole Woofer cone treatment WP Waterproof Front Side Parameters: Fs 130 Hz Re 5.7 ohms Qes 0.49 Qms 3.7 Qts 0.44 Vas 3.0 dm3 Sd 132.0 cm2 Reference efficiency 1.4 % Xmax 2.0 mm Xvar 4.5 mm Mms 12 g Bl 10.5 Txm Le 0.25 mH EBP 265 Hz Mounting And Shipping Info: Overall diameter 187 mm Bolt circle diameter 172 mm Baffle cutout diameter 145.0 mm Depth 82 mm Flange and gasket thickness 9 mm Air volume occupied by driver 0.8 dm3 Net weight 2.2 kg Shipping weight 2.45 kg Shipping box 221x214x130 mm Recone Kit RCK06MD388