Polovan ,delimicno ispitan ,EX - 43392 - S REV.B , za pci slot (RS 232).Imate sliku iz windowsa 7(vidi sliku).Nisam ga prakticno koristio ,pa na njega ne dajem garanciju i reklamaciju.Stanje kao sa slika.Sa neta:Manufacturer: EXSYS Modell: EX-43392-S Product: RS-232 Card Slot: PCI 32 bit Port: 1 x serial (rs-232) Dimensions: 6.2 x 12 cm approx Low profile: Yes

UGREEN KVM Switch je funkcionalni adapter, koji ima dva USB 2.0 tip B ulaza i jedan USB 2.0 tip A port. Omogućava vam da delite pristup jednom USB uređaju između dva računara. Savršeno rešenje za korisnike koji treba da dele, na primer, USB štampač između dva računara. Sa mogućnošću upravljanja datotekama sa dva računara istovremeno, možete lako i brzo da ih kontrolišete između uređaja. UGREEN KVM adapter sa prekidačem radi sa bilo kojim računarom na kome je omogućen USB, bez drajvera za Windows 10/8/8.1/7/Vista/XP, Mac OS X, Linux i Chrome OS, možete slobodno da prelazite između dva računari kada su povezani na USB uređaj jednim pritiskom na dugme. Specifikacija: Brend: Ugreen Model: 30345 Ulaz: 2 x USB-B Izlaz: USB 2.0 Prenos podataka: 480 Mbps

Podelite jedan USB uredaj sa 2 racunara Nije potrebno napajanje Savršeno za štampace, skenere i mnoge druge USB periferne uredaje -Za štampac, skener ili bilo koji drugi USB uredaj -2 racunara mogu da dele jedan USB uredaj (ili nekoliko uredaja povezanih sa USB cvorištem) -2 ulazna USB konektora (B muški) i jedan izlazni USB konektor (A ženski) Podržani interfejs: USB 2.0 / 1.1 kompatibilni USB 3.0 / 2.0 / 1.1 uredaj Konektori: 2x USB-BF v.2.0 za 2 racunara, USB-AF za uredaj ili USB cvorište Dimenzije: 120x85x28mm Neto težina: 0,15 kg Boja: crna

Omogucava korišcenje SSD diska u formatu M.2 na bilo kojem racunaru sa najmanje jednim slobodnim PCI-Express slotom. Dodatna kartica PCI-Ekpress M.2 adaptera -Mogu se povezati M.2 SSD-ovi u formatu 2280, 2260 ili 2242! -Nije potrebna instalacija drajvera -Podržava NVM Express (NVMe) Podržava M.2 SSD module u formatu 2280, 2260 i 2242 pomocu tastera M ili tastera B + M Konektori: 1 x 67 pin M.2 key M slot 1 x PCI Express x4, V3.0 1 x 2 pin pin header for LED Bootable from UEFI version 2.3.1 Dodatni mali nosac Dimenzije: 101x55x12mm Neto težina: 50g Sistemski zahtevi: Iskljucivo Windows 10

KUPUJTE BEZBEDNO I KUPUJTE PROVERENO! POGLEDAJTE MOJE OCENE! SALJEM POSTEKSPRESOM i BEX-om SIROM SRBIJE! MOGUCE LICNO PREUZIMANJE I TESTIRANJE U INDJIJI I NOVOM SADU! Agiler Auto Switch Parallel Port adapter. Model No: AGX-211P Agiler AGX211P A/B DB25 Parallel Auto Switch DV25 paralalni svic mozete koristiti za stampace (printere) tako sto pomocu njega mozete povezati da dva racunara rade na jednom stampacu. Ima 1 ulaz i 2 izlaza. Provereno radi na Epson lx 310, lq 2180 i lq 2190 stampacima. Nije mu potrebno dodatno napajanje i ide bez DB 25 kabla (prodajem ga posebno). Potpuno ispravan i testiran. Radna garancija 30 dana.

KUPUJTE BEZBEDNO I KUPUJTE PROVERENO! POGLEDAJTE MOJE OCENE! SALJEM POSTEKSPRESOM i BEX-om SIROM SRBIJE! MOGUCE LICNO PREUZIMANJE I TESTIRANJE U INDJIJI I NOVOM SADU! Duel Express Card to PCMCIA adapter za laptopove. Model: DuelAdapter by Duel Systems Part No: DA-001 (EXP34-DA-001) S/N: 00017258 54mm CardBus 68 pina to 34 mm Express card 26 pina Sluzi za povezivanje starijih PCMCIA kartica na noviji slot ExpressCard na laptopovima koji imaju Express Card 34 ili Express Card 54 slotove. Radi sa svim WiFi, Firewire, USB, eSata i ostalim vrstama kartica. Ima Texas Instruments cip sa kojim sve kartice bez problema rade i podesavanje rada u A i B modu preko prekidaca. Potpuno ispravan i testiran. Radna garancija 30 dana. Karakteristike: Features Windows XP and Mac OS X compatible Works great with Panasonic P2 Cards! Fits in 34mm or 54mm ExpressCard slots Works with standard PCMCIA 32-Bit PC CardBus and 16-Bit PC Cards Connects PCMCIA PC Cards to ExpressCard equipped notebook and desktop computers Also works with CompactFlash, Memory Stick, MMC SD Card, and other consumer memory cards using suitable adapters Data transfer rate up to ExpressCard maximum, limited by PC Card application Convenient 2-part module with cable for easy desktop configuration Easy driver installation and set up System Requirements PC Please check the Unsupported Systems List before purchasing. ExpressCard 54 or 34 equipped PC Windows XP, Vista, Windows 7 Drivers must exist for any PC Card being used System Requirements Mac ExpressCard 54 or 34 equipped Mac (ie. MacBook Pro) Mac OS X 10.6 (NOTICE: The DuelAdapter does not support Apple SNOW LEOPARD software upgrade) Mac OS X 10.5 (no drivers required) Mac OS X 10.4.8 (on CD-ROM) Mac OS X 10.4.9 and 10.4.10 drivers are available for download from Duel System`s download site. Drivers must exist for any PC Card being used DEVICES KNOWN NOT TO WORK Village Tronic has informed their customers that their VTBook product does not work with the DuelAdapter. SYSTEMS KNOWN NOT TO WORKThe following systems have ExpressCard firmware issues and are known not to work with the DuelAdapter. Some other ExpressCard equipped computers may also have compatibility issues, this list is by no means comprehensive. Allienware M5550 Allienware M5551 Dell Latitude 131L HP/Compaq DV2416US HP/Compaq DV6000 Series Models HP/Compaq DV9000 Series Models Nobilis N4026 Sony VAIO VGN-CR123 E Sony VAIO VGN-CR203 E Sony VAIO VGN-F2180 E/B Toshiba Satellite A205 6468 Toshiba Satellite P205 Toshiba Satellite S4607 Toshiba Satellite S4807 Toshiba Satellite X205 Macs Running Mac OS X 10.6 and above Chipset TI Bus Interface Host: ExpressCard Peripheral: PCMCIA 32-Bit PC CardBus Cards Peripheral: PCMCIA 16-Bit PC Cards Connectors Host: ExpressCard 34 Peripheral: up to Type II PCMCIA PC Card Performance Up to the full ExpressCard specification (x1 PCI Express) Limited by maximum data rate of PC Card used PCMCIA PC Card Compatibility 16-Bit PCMCIA PC Cards 32-Bit CardBus PC Cards Wide Area Network cellular cards 802.11a/b/g wireless LAN cards ATA Flash Cards and Drives Port expansion cards Ethernet LAN cards Memory cards Modem cards Package Includes DuelAdapter ExpressCard to PC Card Adapter 1-year limited warranty and support card Product registration card Driver CD-ROM Install Guide Physical Characteristics Dimensions Interface Module: 34 x 110 x 15mm Dimensions Interconnect Cable: 225 x 6mm diameter Dimensions PC Card Module: 72 x 141 x 26mm Weight: 115g (approximate) Electrical Characteristics Meets all PCMCIA and ExpressCard requirements 3.3V ± 0.3V @ 500mA (max. ) directly from ExpressCard socket Approvals: UL, CE, FCC, RoHS

KUPUJTE BEZBEDNO I KUPUJTE PROVERENO! POGLEDAJTE MOJE OCENE! SALJEM POSTEKSPRESOM i BEX-om SIROM SRBIJE! MOGUCE LICNO PREUZIMANJE I TESTIRANJE U INDJIJI I NOVOM SADU! Sinclair / ZX Spectrum / ZX81 kasete sa igrama i programima. POJEDINACNE CENE PISU U OGLASU! Vrlo lepo ocuvane originalne kasetne trake (tape cassette) kao NOVE! Sledeci naslovi su u ponudi: GRE: - Disco Dan by GEM Software 1984 - 1900 din - Oh Mummy by GEM Software 1982 Amstrad - 1900 din - Treasure Island by MR Micro LTD 1984 - 2600 din - Flight Simulator by PSION 48K Ram 1982 UK (G11/S) - 1600 din - Jet Pac by Ultimate 16K/48K Ram (Ashby Computers &Graphics Ltd. ) 1982 G27/R - 3800 din - Chess by PSION with Micro Gen 48K Ram (G10/S) 1982 UK - 2600 din - Crazy Golf by MR Micro 1982 Amstrad - 1900 din - Pssst (Robbie Robot) by Ultimate 16K/48K Ram (Ashby Computers &Graphics Ltd. ) 1982 G28/S - 2600 din - Reversi also known as Othello by MOI 16K Ram (Games of Skill Ltd) 1982 G18/S - 1900 din SOFTVER: - Horizons Software Starter Pack by PSION (C2) 1982 for Sinclair ZX Spectrum - 1900 din Strana A - Introdution and hardware description, Keyboard trainer (4 part`s), keyword dictionary Strana B - Thro` The Wall, Bubblesort, Evolution or Foxes and Rabbits, Life, Draw, Monte-Carlo, Character generator, Waves Potpuno ispravne.

Description The GPRS Shield is based on SIM900 module from SIMCOM and compatible with Arduino and its clones. The GPRS Shield provides you a way to communicate using the GSM cell phone network. The shield allows you to achieve SMS, MMS, GPRS and Audio via UART by sending AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module(They are all 2V8 logic) present onboard. Features Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world. GPRS multi-slot class 10/8 GPRS mobile station class B Compliant to GSM phase 2/2+ Class 4 (2 W @ 850 / 900 MHz) Class 1 (1 W @ 1800 / 1900MHz) Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal). Embedded TCP/UDP stack - allows you to upload data to a web server. RTC supported. Selectable serial port. Speaker and Headphone jacks Low power consumption - 1.5mA(sleep mode) Industrial Temperature Range - -40°C to +85 °C Size:8.5x5.7x2cm(approx)

Description: This mini OLED is design for Raspberry Pi computers, to give you a little display. The PiOLED comes with a monochrome 128x64 OLED, with white pixels. The OLED uses only the I2C pins so you have plenty of GPIO connections available for buttons, LEDs, sensors, etc. It`s also nice and compact so it will fit into any case. These displays are small, only about 1` diagonal, but very readable due to the high contrast of an OLED display. This screen is made of 128x64 individual white OLED pixels and because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness! Using the display is very easy, we have a Python library for the SSD1306 chipset. Our example code allows you to draw images, text, whatever you like, using the Python imaging library. Our tests showed 30 FPS update rates so you can do animations or simple video. Comes completely pre-assembled and tested so you don`t need to do anything but plug it in and install our Python code! Works with any Raspberry Pi computer, including the original Pi 1, B+, Pi 2, Pi 3 and Pi Zero. Feature: Voltage: 3.3v Interface: IIC Color: White Dimensions: 30mm x 30mm

KUPUJTE BEZBEDNO I KUPUJTE PROVERENO! POGLEDAJTE MOJE OCENE! SALJEM POSTEKSPRESOM i BEX-om SIROM SRBIJE! MOGUCE LICNO PREUZIMANJE I TESTIRANJE U INDJIJI I NOVOM SADU! Gemalto GemPC Twin USB smart citac licnih karata, zdravstvenih knjizica i vozackih dozvola. Model: PC USB-TR P/N: HWP108760 A Gemalto GemPC Twin USB smart Card Reader / citac saobračajne dozvole Kvalitetan i pouzdan čitac kartica, lične karte, vozačke dozvole i zdravstvene knjižice. Čitač nove generacije koji koristi univerzalne USB CCID drajvere već ugrađene u novije operativne sisteme Radi na skoro svim platformama i operativnim sistemima kao sto su: Windows 10 Windows 8.1 Windows 8 Windows 7 Windows Vista Windows XP Server 2012 Server 2008 R2 Windows CE (5/6/7) depending on hardware Linux Debian 6.0+, Ubuntu 11.04+, Fedora 15+, Open SUSE 11.4+ Mac OS X Android Potpuno ispravan i testiran. Radna garancija 30 dana. Opis: USB čitač reader ORIGINAL Gemalto GemPC Twin HWP108760 D Smart Card Reader smart biometrijskih kartica, ličnih elektronskih dokumenata (lična karta, zdravstvena knjižica, vozačka, saobraćajna dozvola, itd. ), kvalifikovanih elektronskih sertifikata, elektronskih potpisa Karakteristike: Host interface • USB 2.0, full speed (12Mbits/s), hubless, CCID protocol Standards • ISO7816-1, 2, 3, 4 • EMV terminal level 1 version 4 Supported smart cards Asynchronous • Microprocessor cards • T= 0, T=1 protocols • Transmission rate: 2 Kbps to 826Kbps (TA1=17 @ CK=4.8MHz) Synchronous • Through the Command Interpreter Smart card electrical interface Smart card power supply • 5V and 3V and 1.8V • Short circuit current limitation • Power up / power down control sequences Smart card management • Card insertion/extraction detection ESD protection on card I/O • 8KV Human Body Model Power down • Less than 200μ A suspend mode current Human interface Led • Green led with dual state (waiting and operation) USB Smart Card Reader GSM SIM HBCI for GemPC Twin (HWP108765 C HWP108760 B HWP108760 D)

Kontrolor brzine kompjuterskih ventilatora u zavinosti od temperature. Poseduje i alarm ukliko se ventilator zaustavi. Features Support all within 12V 5A fans, synchronous rectifier output, high efficiency! Even if a large current work does not require additional heat sink! A plurality of fans can be used in parallel (total current does not exceed 5A), supports automatic temperature control and manumotive speed control, temperature control speed with four temperature zones for setting up, easy to apply in a variety of applications! It can be opened with a three-wire fan monitoring function (stall warning). Specifications Working voltage: DC12V Circuit load capacity: maximum current per output 5A, the bus currents up 9A Output Range: The first channel 20% -100%, or 40% -100% (TFL = ON) The second channel and the third channel 10% -100% (Note: Above range only for PWM range, the actual control effect will vary depending on the fan. ) Temperature probe parameters: 50K B = 3950 Thermostat temperature zone error: error depending on the temperature probe, generally 3-5% Stall alarm minimum speed: 700-800 rpm Function setting switch Description: TFL (No. 1): The lowest temperature channel PWM setting, when ON state FAN1 PWM minimum is 40%, when OFF the minimum PWM of FAN1 is 20%. TP1 TP2 (No. 2,3): Temperature channel control temperature zones are interpreted as follows (need to used with the temperature probe): When the temperature lower than the accelerated temperature, then output at the minimum rotation speed; when it exceed over the full temperature, then always output at full speed. BF1 BF2 (No. 4,5): corresponds FAN1 FAN2 stall alarm function switch, when the corresponding open channel fan break down, the controller will alarm with soundand light (works with buzzle), alarm will automatically eliminated when the fan is rotated recovery . If BF1 and BF2 both are open (ON), the FAN1, FAN2 have any one or both stops, the controller will alarm!

KUPUJTE BEZBEDNO I KUPUJTE PROVERENO! POGLEDAJTE MOJE OCENE! SALJEM POSTEKSPRESOM i BEX-om SIROM SRBIJE! MOGUCE LICNO PREUZIMANJE I TESTIRANJE U INDJIJI I NOVOM SADU! SIIG CyberPro PCI karta sa 2 x RS232 serijska porta za PC racunare. Model: JJ-P02D11-S6 Hardware Version 6.0 PCI to Serial Port Card SIIG’ s CyberSerial Dual Ima dva serijska RS-232 porta od 9 pina. Pomocu dzampera na samoj karti je moguce konfigurisati kartice. Podrzava sledece operativne sisteme: DOS, Windows 95/98/98SE/ME/2000/XP/Server 2003/Vista/Windows 7/Windows 8 & Linux Kernel 2.4. x or later Potpuno ispravna i testirana na Windows 7 x64 operativnom sistemu na kome se drajveri automatski instaliraju. Radna garancija 30 dana. Karakteristike: Regulatory approval(s): FCC Class B (DoC) & CE Chip: CyberPro Bus type: 32-bit PCI Port type: Two 9-pin RS232 serial port IRQ sharing reduces IRQ conflicts Built-in 32-byte FIFO buffers dramatically increase data transmit/receive speed, especially under Windows multitasking environment 4-layer PCB board: separate layers for data & grounding. Greatly reduces signal noise & loss. Delivers more reliable high-speed data transfers Enhanced bracket design to prevent bending. Connected to PCB with washered screws for a more secure connection Supports 3.3V operation with 5V tolerance Conforms to PCI v2.2 universal card standard. PCI-X & 64-bit compatible Supports PME # (Power Management Event). Allows device to request a change in system power state (wake up system) Use SMT (Surface Mount Technology) type electrolytic capacitor. Low ESR (Equivalent Series Resistance) aluminum electrolytic capacitor. Offers much improved noise suppression & achieves higher levels of performance/reliability Use SMT (Surface Mount Technology) type crystal. Offers cleaner design than traditional DIP-type crystal. Provides greatly improved grounding, which reduces EMI emission & improves performance/reliability Supports 32-/64-bit, 3.3V/5V PCI and PCI-X slots Two high-speed 16550 UART serial ports (9-pin) support data rate up to 230 Kbps Will work as standard RS232 port or with 5V or 12V power output for devices that require power (such as handheld scanners, table scanners, POS displays, etc. ). Configurable via jumpers with silk-screened settings on PCB