Pratite promene cene putem maila
- Da bi dobijali obaveštenja o promeni cene potrebno je da kliknete Prati oglas dugme koje se nalazi na dnu svakog oglasa i unesete Vašu mail adresu.
1-25 od 162 rezultata
Režim promene aktivan!
Upravo ste u režimu promene sačuvane pretrage za frazu .
Možete da promenite frazu ili filtere i sačuvate trenutno stanje
Aktivni filteri
Tehnička specifikacija EL-D100G: max 100mW (2 x 50mW), min 80mW 532nm green * Lasers: aircooled DPSS laser * laser class: 3b * Beam properties: 3mm/1mrad * Scanner system: high-speed micro step motors * Deflection angle: max. 30± optical * Scanspeed: 2-5kpps. * Control mode: DMX 512, Stand-Alone (Auto / Sound) * DMX 512: 4 channels * basic patterns: 50 (layers, tunnels, fences, waves...) * effects: more than 250 different beam effects * Laser Safety: compliance to IEC 60825-1 * accessories: power cable, manual. * power supply: 220V - 240V AC (alternative 110V) * power consumption: 40W * measukaišts: 408 x 280 x 120 mm (L x W x H) * weight: 5 kg
Take your color mixing to the next level with the ADJ Flat Par QWH12XS professional “low profile” LED fixture. It features twelve 5-Watt QUAD LEDs (4-in-1 RGBW) with smooth RGB color mixing as well as a White LED to get the hard to achieve true cool white. The units “low profile,” sideways power & DMX Ins/Outs and dual hanging brackets make it ideal for mobile entertainers, permanent installations and for inserting into truss or for uplighting. The Flat Par QWH12XS has 8 different DMX channel modes, and may also run in Sound Active or Master/Slave modes. Users can also go “wireless” with the ADJ LED RC2 wireless remote (sold separately). This LED fixture also features: 15 Color Macros, Electronic Dimming (0-100%), IEC AC IN and OUT on rear to daisy chain power and a 25-degree beam angle. The Flat Par QWH12XS LEDs are rated at 50,000 hours, and only draws 80-Watts of power per fixture. Specifications: Ultra bright slim fixture with 12x 5-Watt QUAD LEDs (4-in-1 RGBW- Red, Green, Blue & White) Unique “sit flat” design – Power & DMX Ins/Outs are intelligently designed so the unit can be set flat on the ground or set inside truss Great for performance stages where traditional par cans emit a lot of heat onto performers Low profile case design Wireless infrared remote control up to 15 ft./4.5M (Model: ADJ LED RC2 - sold separately) 8 DMX Channel modes: 1, 2, 3, 4, 5, 6, 7 or 8 channel modes 6 Operational modes: Manual Color Mode; Color Change Mode; Color Fade Mode; Auto (Program Run) Mode; Sound Active Mode and DMX-512 Mode Smooth RGBW color mixing (fast or slow color change operation) QUAD LED (4-in-1) projects no RGB shadows 15 built-in Color Macros Color strobe effect Flicker Free Electronic Dimming: 0 - 100% Beam angle: 25-degree Linkable via 3-pin XLR cable (In/Out) 4-button LED DMX display on rear panel Dual bracket yoke allows fixture to be hung or set on the ground IEC AC IN/OUT outlets on rear to daisy chain power (up to 7 units) Includes gel frame for optional diffusion filters Run all night – No duty cycle Long Life LEDs (50,000 hrs.) Power Draw: 80W max Multi-voltage operation: AC 100-240V, 50/60Hz (IEC power In/Out) Dimensions (LxWxH): 328x280x115mm Weight: 3.2 kg
The DT34 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29cm series. For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 2mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness. The system from European production is compatible to the most common systems in the market and self-evident TÜV approved. Specifications: Main tube diameter: 50mm Wall thickness main tube: 2mm Bracing diameter: 20mm Wall thickness bracing: 2mm Alloy: EN-AW 6082 T6 (AlMgSi1) Connection: conical connectors with bolt and splint Delivery includes: 4 conical connectors, 8 bolts, 8 splints Produced according DIN 4112, DIN 4113-1
The ADJ UV COB Cannon produces a large ultraviolet wash from high output, advanced COB (Chip On Board) UV LEDs–COB LED technology allowing for a powerful LED engine to be placed in a small amount of space. This professional lighting fixture is designed for washing performance stages, theatrical productions and special effects productions. It requires very little maintenance or service due to its sold state electronics. The UV COB Cannon has 3 operational modes (sound active, manual or DMX), has 3 DMX operational modes, 5 selectable dim curves, a 4-Button DMX Display and is flicker free for film and television. This fixture is DMX linkable via 3-pin DMX, and is power linkable via PowerCon connections. The light source is a 100-Watt COB (Chip On Board) UV LED engine. Specification: Super high output UV light cannon Great for performance stages, theatrical productions and special effects productions – requires almost no maintenance – low heat, low power consumption Advanced COB Technology (Chip On Board) produces powerful, smooth UV color 3 Operation modes: Sound Active, Manual, & DMX 3 DMX Channel modes: 1, 2 or 3 channel 4-button digital DMX display Flicker Free operation (No flickering on camera) 5 selectable Dim Curves (Standard, Stage, TV, Architectural & Theatre) LED pulse and strobe effect Electronic Dimming: 0 100% Beam angle: 33 degrees Dual yoke allows fixture to be hung or set on the ground DMX Linkable: 3-pin XLR data connectors Power Linkable: PowerCon connectors (Up to 3 UV COB Cannon’s @ 120V, 5 UV COB Cannon’s @ 220V fixtures) Long Life LEDs Rated at approximately 25,000 hrs.) Power Draw: 120W total (All LED's @ Full) Light Source: 100W COB (Chip On Board) UV LED engine Multi-voltage Operation: Auto switching, AC 100V 240V/50Hz -60Hz Dimensions (LxWxH): 12.75” x 11” x 8”/ 320 x 278 x 200mm Weight: 11 lbs. / 4.98kgs Specifications subject to change without notice
The DT33 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29cm series. For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 2mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness. The system from European production is compatible to the most common systems in the market and self-evident TÜV approved. Specifications: Main tube diameter: 50mm Wall thickness main tube: 2mm Bracing diameter: 20mm Wall thickness bracing: 2mm Alloy: EN-AW 6082 T6 (AlMgSi1) Connection: conical connectors with bolt and splint Delivery includes: 3 conical connectors, 6 bolts, 6 splints Produced according DIN 4112, DIN 4113-1
Proffesional wind up stand made of strenghtened steel loads up to 60kg. Installed ratchet lock protects fixed equipment against uncontrolled falling down and damage. It’s an ideal solution for mobile DJ and musicians. Material: steel Load capacity: 60 kg Maximum height: 2,70 m Base spread diameter: 1,54 m Height: 1,60 m Pipe diameter: 35 mm Weight: 12 kg
Tehnička specifikacija - Main tube diameter: 50mm - Wall thickness main tube: 2mm - Bracing diameter: 20mm - Wall thickness bracing: 2mm - Alloy: EN-AW 6082 T6 (AlMgSi1) - Connection: conical connectors with bolt and splint - Delivery includes: 4 conical connectors, 8 bolts, 8 splints - Produced according DIN 4112, DIN 4113-1 Dodatne informacije The DT34 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29cm series. For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 2mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness. The system from European production is compatible to the most common systems in the market and self-evident T+â+ôV approved.
Tehnička specifikacija - Main tube diameter: 50mm - Wall thickness main tube: 2mm - Bracing diameter: 20mm - Wall thickness bracing: 2mm - Alloy: EN-AW 6082 T6 (AlMgSi1) - Connection: conical connectors with bolt and splint - Produced according DIN 4112, DIN 4113-1 Dodatne informacije The DT34 Series is one of the most sold Truss systems in general. The high load capacity and the light weight construction are plus points for this 29cm series. For a fast and stress free build up, the DT Series is equipped with standard sized conical fast couplers. The 50mm tubes are from high grade aluminum and show 2mm wall thickness. The bracing have a diameter of 20mm and also 2mm wall thickness. The system from European production is compatible to the most common systems in the market and self-evident T+â+ôV approved.