801 D4 Signature je optimizovan za savršenstvo. 801 D4 Signature je unapređena verzija našeg najnaprednijeg zvučnika. On sadrži pažljivo razvijenu tehnologiju, pažljivo oblikovan dizajn i jedinstvene završne obrade koje kulminiraju vrhunskim performansama. Ovo je vrhunski zvučnik Bowers & Wilkins-a, doveden do savršenstva. Diamond Dome visokotonac Jedan od naših najznačajnijih dostignuća u protekle dve decenije je ultra čvrst i izuzetno precizan Diamond Dome visokotonac, koji predstavlja savršenu kombinaciju niske mase, izuzetne čvrstoće i izvanredne preciznosti. Petnaest godina nakon njegovog predstavljanja, nismo pronašli bolju tehnologiju za visokotonac. Solid Body visokotonac Naš Solid Body visokotonac na vrhu kućišta ima produženi oblik sa sistemom za usmeravanje zvuka i potpuno novim dizajnom rešetke za visokotonac, što rezultira još slobodnijim i otvorenijim zvukom visokih frekvencija. Unapređena skretnica 801 D4 Signature koristi unapređenu skkretnicu montiranu na zadnjoj strani, postavljenu na čvrste aluminijske šipke. Ovo izoluje osetljive kondenzatore od neželjenih efekata vazdušnog pritiska u kućištu i obezbeđuje optimalne performanse pri korišćenju. Aluminijumska gornja ploča Svaki novi model 800 Series Signature ima značajno unapređen dizajn kućišta sa potpuno novim, optimizovanim aluminijumskim gornjim delom za još veću čvrstoću. Isti dizajn pruža idealno mesto za montažu detalja od kože od strane Connolly-a, sa luksuznom plavom kožom za modele Midnight Blue Metallic i crnom kožom za modele California Burl Gloss. Otkrijte 805 D4 Signature Iako uvek težimo akustičnoj izvrsnosti, takođe stvaramo dizajne koji su prelepo oblikovani, značajni i elegantni. Naš 805 D4 Signature nije izuzetak, sa svojim prepoznatljivim proporcijama, beskompromisnom konstrukcijom i luksuznim detaljima. Veličina i težina Dimenzije: Visina: 1221mm Širina: 451mm Dubina: 600mm Neto težina: 100.60kg Tehnički detalji Tehničke karakteristike: Diamond visokotonac Solid Body visokotonac na vrhu Continuum™ cone FST™ srednjetonac Anti-Resonance utikač Biomimetičko vešanje Turbinasta glava Matrix™ Aerofoil™ profil bas membrane Flowport™ Opis 3-wayi sistem sa ventiliranim kućištem Pogonske jedinice 1x ø25mm (1in) Diamond Dome visokotonac 1x ø150mm (6in) Continuum™ cone FST™ srednjetonac 2x ø250mm (10in) Aerofoil™ profil bas Opseg frekvencija -6dB 13Hz - 35kHz Odziv frekvencija 15Hz - 28kHz ±3dB Osetljivost 90dB spl (2.83Vrms, 1m) Harmonijska distorzija 2. i 3. harmonik (90dB, 1m) po osi <1% 30Hz – 20kHz <0.3% 100Hz – 20kHz Nominalna impedansa 8Ω (minimum 3.0Ω)

Classic quality 804 D4 is perhaps more conventional in appearance than other floor-standers in the 800 Series Diamond range, but it’s every bit as sophisticated. Its new Reverse-Wrap cabinet is both a mechanical and acoustic revolution in its class, and its new plinth ensures rock-solid, accurate bass response too. Aluminium top-plate Every stereo model in the new 800 Series Diamond range has a significantly upgraded cabinet with an all-new aluminium top-plate. This also provides a perfect mounting point for all-new Leather by Connolly trim, with luxurious black leather for dark cabinets and light grey for lighter finishes. Reverse Wrap cabinet Instead of a conventional loudspeaker box, the cabinet in 804 D4 is made from a continuous curved section of wood, with the drive units mounted at the heart of the curvature. This stiffer, more inert structure resists mechanical resonances far better and also ensures better dispersion of sound. Aluminium plinth A great speaker needs a rock-solid foundation. The new 804 D4 uses a downwards-firing Flowport exiting on to a solid aluminium plinth complete with a steel constrained layer damping sheet, which controls unwanted resonance. It also has greatly upgraded spikes for maximum stability and durability. The science of sound Innovation is at the heart of everything we do. We question, we examine, we understand and then we evolve. We use computer modelling to explore and reimagine every aspect of loudspeaker design. Learn more about all the technologies that combine to make 800 Series Diamond so special here. The 804 D4 is a significant upgrade over its predecessor. Purity, resolution and prominently presenting the finest detail and a lifelike performance are its strengths. hifi.nl - 5 stars Get a Head 804 D4 is the entry-level floor-standing model in the 800 Series Diamond range. Step up to 803 D4 and you’ll find larger bass drivers (180mm, 7-in) plus, crucially, the addition of a Turbine™ Head enclosure for the 130mm (5-in) midrange cone, which adds even more spaciousness to the sound. · Size & weight Dimensions Height: 1071mm (42.2 in) Width: 306mm (12 in) Depth: 391mm (15.4 in) Net weight 36.85kg (81.2 lb) · Technical details Technical features Diamond tweeter Solid body Tweeter-on-Top Continuum™ cone FST Anti-Resonance plug Biomimetic Suspension Matrix™ Aerofoil™ cone bass units Flowport Description 3-way vented-box system Drive units 1x ø25mm (1in) Diamond dome high-frequency 1x ø130mm (5in) Continuum cone FST midrange 2x ø165mm (6.5in) Aerofoil cone bass units Frequency range 20Hz to 35kHz Frequency response 24Hz to 28kHz (+/-3dB from reference axis) Sensitivity 89dB (on axis at 2.83Vrms at 1m) Harmonic distortion 2nd and 3rd harmonics (90dB,1m on axis) <1% 90Hz – 20kHz <0.3% 120Hz – 20kHz Nominal impedance 8Ω (minimum 3.0Ω) Recommended amplifier power 50W – 200W into 8Ω on unclipped programme Max recommended cable impedance 0.1Ω

Absolute elegance 802 D4’s svelte proportions and beautiful painted or real-wood-veneer finishes make for an elegant living-room companion – but one that doesn’t compromise on performance. Perfect for reference-grade stereo listening and an excellent choice in home theatre applications. Aerofoil™ bass cone Our Aerofoil bass cone technology remains an outstanding solution to the conundrum of combining low mass and high stiffness in bass cones, thanks to its carbon-fibre skin and variable-profile foam core. Now, we have added the foam Anti-Resonance Plug for lower distortion and even cleaner bass. Aluminium top-plate Every stereo model in the new 800 Series Diamond™ range has a significantly upgraded cabinet with an all-new aluminium top-plate. This also provides a perfect mounting point for all-new Leather by Connolly trim, with luxurious black leather for dark cabinets and light grey for lighter finishes. Decoupled midrange assembly Like its floor-standing siblings in the new range, 802 D4 has a dedicated midrange cone using three key Bowers & Wilkins technologies: the Continuum™ cone, Biomimetic Suspension and midrange decoupling, the latter ensuring minimal interference from the operation of the loudspeaker’s bass drivers. The science of sound Innovation is at the heart of everything we do. We question, we examine, we understand and then we evolve. We use computer modelling to explore and reimagine every aspect of loudspeaker design. Learn more about all the technologies that combine to make 800 Series Diamond so special here. The Bowers & Wilkins 802 D4 produces less inherent sound than virtually any other loudspeaker, and reproduces music as it was originally recorded, completely unclouded. avguide.ch One of our best 802 D4 is a very special loudspeaker in its own right, with a thrilling blend of performance and style that other loudspeakers will find hard to emulate. Only one model in our range can best it – the flagship 801 D4, which has 250mm (10-in) bass cones in a more substantial low-frequency enclosure. Size & weight Dimensions Height: 1218mm (48 in) Width: 413mm (16.3 in) Depth: 602mm (23.7 in) Net weight 88.10kg (194.2 lb) Technical details Technical features Diamond tweeter Solid body Tweeter-on-Top Continuum™ cone FST Anti-Resonance plug Biomimetic Suspension Turbine™ Head Matrix™ Aerofoil™ cone bass units Flowport Description 3-way vented-box system Drive units 1x ø25mm (1in) Diamond dome high-frequency 1x ø150mm (6in) Continuum cone FST midrange 2x ø200mm (8in) Aerofoil cone bass units Frequency range 14Hz to 35kHz Frequency response 17Hz to 28kHz (+/-3dB from reference axis) Sensitivity 90dB (on axis at 2.83Vrms at 1m) Harmonic distortion 2nd and 3rd harmonics (90dB,1m on axis) <1% 70Hz – 20kHz <0.3% 100Hz – 20kHz Nominal impedance 8Ω (minimum 3.0Ω) Recommended amplifier power 50W – 500W into 8Ω on unclipped programme Max recommended cable impedance 0.1Ω

The 4329P is a completely self-contained amplified loudspeaker system featuring high-resolution streaming audio and prosumer connectivity. Patented JBL acoustic technologies render sound with incredible accuracy and powerful dynamics, while extensive wired and wireless connectivity opens up a world of possibilities for the music lover. Patented JBL Driver Technologies: 2409H / 1-inch (25mm) Compression Driver with High-Definition Imaging™ Horn 600W Total RMS System Power Wireless Streaming Audio via Chromecast, AirPlay 2, and Bluetooth J W 2 0 0 P - 4 / 8 - I N C H ( 2 0 0 M M ) P U R E - P U L P B L A C K PA P E R C O N E W O O F E R S W I T H C A S T - F R A M E S 2 4 - B I T / 1 9 2 K H Z H I G H - R E S O L U T I O N D A C E X T E N S I V E D I G I TA L A N D A N A L O G C O N N E C T I V I T Y Description 4329P Studio Monitor Powered Loudspeaker System The JBL 4329P Studio Monitor Powered Loudspeaker is a completely self-contained amplified loudspeaker system featuring high-resolution streaming audio and prosumer connectivity. Patented JBL acoustic technologies render sound with incredible accuracy and powerful dynamics, while extensive wired and wireless connectivity opens up a world of possibilities for the music lover. Each speaker is powered by a 300-watt amplifier, delivering 250 watts of power to the woofer and 50 watts of power to the compression driver. Both accurately controlled by sophisticated DSP processing assuring each driver blends seamlessly creating a dynamic and immersive listening experience. The integrated streaming engine provides both wired and wireless network audio capabilities via Google Chromecast built-in, Apple AirPlay 2, and Bluetooth 5.3 aptX Adaptive audio. A 24-bit/192kHz high-resolution DAC ensures your favorite music comes across with the highest fidelity. In addition to premium wireless audio, the 4329P provides extensive connections for analog and digital physical sources including a professional-grade combination XLR / ¼-inch TRS phono inputs for use with balanced or unbalanced signals. Type Bass-reflex Loudspeaker System with Built-in Amplification, DSP, and Wireless Connectivity Low Frequency Drivers JW200P-4, 8-inch (200mm) Pure-pulp Black Paper Cone Woofers with Cast-frames High Frequency Drivers 2409H, 1-inch (25mm) Annular Ring, Teonex® Diaphragm Compression Drivers with Advanced HDI™ Geometry Horns Amplifier Power 600W Class D System Power, 300W RMS per Speaker (50W per HF Compression Driver + 250W per LF Woofer) Audio Resolution Up to 24-bit, 192 kHz (Digital Link connection between spks) Audio Resolution Up to 24-bit, 96 kHz (Wireless connection between spks) Frequency Response 28 Hz - 25 kHz (-6 dB) Crossover Frequency 1,675 Hz Dispersion 90° Horizontal x 60° Vertical (2kHz to 15kHz) Sound Controls Front Panel Wireless Inputs WiFi streaming, Bluetooth 5.3 Wired Inputs (Analog) XLR/¼" Combo and 3.5mm stereo Wired Inputs (Digital) Asynchronous USB-B and Toslink/Optical Supported Digital Audio Sample Rates (PCM 2CH) Streaming & Local Media - 32kHz/44.1kHz/48kHz/88.2kHz/96kHz/176.4kHz/192kHz SPDIF - Up to 192kHz USB-B - PCM 2-channel, up to 192kHz Bluetooth - Up to 48kHz, aptX Adaptive up to 96kHz Music Formats Supported (Local Media) AAC / AIFF / ALAC / DSD64 (to PCM) / FLAC / MP3 / MP4 / MQA / OGG / WAV / WMA Subwoofer Output Autosensing w/ Auto-engage of 80Hz High Pass Filter Remote Control Type BTLE Wireless Bluetooth Audio Version 5.3 Bluetooth Audio Profiles SPP (Serial Port Profile), A2DP (Advanced Audio Distribution Profile), AVRCP (Audio/Vido Remote Control Profile) Enclosure Bass-reflex Design with Dual Front-facing Ports, ¾" MDF Finished in Satin Walnut or Black Walnut Furniture-Grade Wood Veneer Grille Dark Blue (with Walnut Cabinet) or Black (with Black Cabinet) Acoustically Transparent Cloth Grille Net Speaker Dimensions with grille 20.3” H x12.6” W x 12.7” D (515.5mm x 320mm x 322.4mm) Net Speaker Weight Primary - 34.5 lbs (15.7kg), Secondary - 34.3 lbs (15.6kg) Shipping Units of Measure System Pairs Gross Shipping Dimensions 25.59” H x 30.31” W x 16.46” D (650mm x770mm x 418mm) Gross Shipping Weight 79.4 lbs (36.1 kg) AC Input Voltage 100 - 240 VAC (+/-10%), 50/60Hz

ProAc K10 Speakers are the latest floorstanders to join the K series range - a selection of speakers utilising Kevlar constructed drivers. The K10 celebrate 10 years of the range and uses two Kevlar cone bass drivers to deliver a simply an stunningly natural and extended bass response. New Midrange Units The K10 is equipped with two of ProAc's ultra-light midrange units designed to deliver an astonishingly detailed midrange. This is thanks to the lightweight diaphragm loaded by an updated waveguide. With this revamped midrange design, the K10 presents an expansive soundstage. Detailed Sound The two K-Cone bass drivers feature new modifications to take advantage of the midrange detail. Power handling is improved and the midrange can work at a higher frequency, revealing details previously hidden thanks to a high quality crossover point. Alongside this, ProAc's ribbon tweeter gives these speakers that sweet sound that when combined with the bass and midrange, creates a wonderfully natural sounding speaker. Premium Design The K10 speakers look as incredible as they sound. Their super slim cabinet stands tall beautiful real wood finishes. The cabinet has been optimised to provide exceptional rigidity and damping. Choose from black ash, mahogany, cherry, walnut, oak and silk white for your visual and listening pleasure. - Nominal Impedance: 4Ω - Recommended Amplifiers: 10 - 150W - Frequency Response: 20Hz - 30kHz - Sensitivity: 91.5dB linear for 1 Watt at 1 Metre - Bass Driver: 2x 200mm (8”) ProAc professional drive units fitted with pure polymer impregnated and polished Kevlar weave cone with rear lacquer and concentric weighting. - Midrange Driver: New 75mm (3”) light diaphragm unit with anew open felt back to help with colouration from the rear. - Tweeter: ProAc ribbon with diaphragm as light as a human hair, alnico magnet and rear chamber damping. - Crossover: Finest components on dedicated dual layer circuit board. ProAc multistrand oxygen free copper cable throughout. Split for optional Bi Wiring or - Bi Amplification - Height: 1499mm (59”) - Width: 297mm (11.7”) - Depth: 457mm (18”) - Weight: 56kg (126lb) each - Grille: Acoustically transparent crimplene

Patented D2430K 3-inch (75mm) dual diaphragm compression driver mated to patented High-Definition Imaging (HDI™) geometry horn. Patented 15-inch (380mm) Dual Differential Drive® woofer in bass-reflex design with dual front-firing tuned ports. Choice of Satin Walnut or Black Walnut furniture-grade satin wood veneers. JBL 4367 For many years, iconic JBL loudspeakers have perfected the definition of luxury audio. The 4367 is no exception. The 2-way loudspeaker offers a cast-frame 15-inch woofer (2216Nd-1) with a powerful, patented Differential Drive® dual 3-inch voice coil and neodymium motor structure for outstanding behavior in the low to mid frequency range. Upper-mid and high frequencies are reproduced by a patented D2430K 3-inch dual diaphragm, dual voice coil compression driver with dual neodymium motor structures and JBL's patented High-Definition Imaging (HDI™) waveguide horn. Type 2-way Floorstanding Loudspeaker Low-Frequency Transducer 15” (380mm) 2216Nd-1 Dual Differential Drive® woofer Mid/High Frequency Transducer 3” (75mm) D2430K dual compression Maximum Recommended Amplifier Power 300 watts RMS Frequency Response (-6DB) 30 Hz – 40 kHz Sensitivity (2.83V@1M) 94dB Nominal Impedance 6 Ohm Crossover Frequencies 700 Hz Enclosure Type Bass-reflex via Dual Front-firing Ports Inputs Dual Gold-plated Five-way Binding Posts Dimensions (H X W X D) 37-1/16” x 22-1/16” x 16-3/4” (941mm x 560mm x 425mm) Weight 119 lb (54kg)

The R Series The R11 is the largest model in the new R Series from UK-based innovators, KEF. It comes before the R7 and R5 floorstanding speakers in terms of size and specification and makes a great accompaniment to the R3 bookshelf speakers and R6 or R2 centre speakers. The R Series is packed full of the latest and greatest innovations from KEF; such features as the trailblazing Metamaterial Absorption Technology (MAT) and Uni-Q® drivers, found in their flagship Reference series and LSX II respectively, are an indicator of great performance. Uni-Q® Across all seven models of the R series, there features the Uni-Q® driver array, consisting of a high-frequency tweeter at the centre of a mid-range driver. On the R11 speaker, this combined unit is found located between four bass drivers—two above and two below. The purpose of such a driver unit is to extend the ‘sweet spot’, thereby yielding optimal listening over a larger area of your room. Now in its twelfth generation, this driver design is the outcome of many technological advancements and in-house modifications. This newest iteration has been designed to perfectly complement the Metamaterial Absorption Technology (MAT) at the centre of KEF’s R series, resulting in incredible sonic detail. A flexible decoupled chassis is one factor contributing to this; such support around the mid-range driver of the R11 speakers minimises midrange vibration to promote ultimate clarity. Metamaterial Absorption Technology The key performance feature of the R11 floorstanding speakers—and the R series more broadly—is the incorporation of Metamaterial Absorption Technology (MAT). It sounds impressive, but what is this exactly? Metamaterial Absorption Technology is a What Hi-Fi? award-winning innovation by KEF in collaboration with the Acoustic Metamaterials Group. It is an absorption solution for speaker drivers which successfully diminishes 99 of unwanted sound. This is approximately 40 better absorption than other loudspeakers, leading to a noticeable difference in sonic clarity and naturalism. Quadruple Bass Definition With a fantastic four bass drivers, the R11 is extremely well-equipped to meet your low-frequency demands. However, with greater bass comes the challenge of control, something KEF has tackled with a two-part structure consisting of a shallow concave aluminium skin and paper cone. The former delivers the stiffness needed to manage resonance and enforces smooth piston movement. Unwanted resonance is further limited by a sophisticated suspension, keeping everything agile for punchy, yet precise bass. Rear-Ported Power Despite having a rear port, the R11 speakers manage to avoid any unwelcome resonance and turbulence through the application of computational fluid dynamics. The results of such calculations are flexible port walls and a strategically sized port flare and profile. Sounds are ultimately untouched by distortive colouration and vibration. Stereo and Home Theatre The R11 Meta floorstanding speakers work great in both stereo or home theatre configurations; for music or film and television. Regardless of room size, the R11 speakers will perform their high-fidelity duties and serve up true-to-recording music or realistic and cinematic sounds. Due to the consistency in driver design and placement across the R series, a full home theatre using R series speakers offers uniformity that’s hard to come by. Features Twelfth generation Uni-Q driver array has been refined over time for next-level clarity Metamaterial Absorption Technology (MAT) diminishes the chance of high-frequency distortion Flexible decoupling chassis helps prevent vibration and noise colouration in the midrange Frequencies meet and mix with an enhanced crossover, resulting in an unspoiled signal delivery Ideal for both stereo and home theatre setups Hybrid aluminium bass drivers with improved stiffness and suspension eliminates unwanted resonance Flexible rear port optimised for minimal sound colouration with computational fluid dynamics A ‘Constrained Layer Damping’ bracing system keeps cabinetry inert Microfibre grilles are included for sleek protection of your speakers’ drivers without inhibiting performance What’s in the Box? Two R11 Meta Floorstanding Speakers Microfibre grilles Plinth and spike accessories Port bungs User manual and warranty information Dimensions with terminal (H x W x D) 1249 x 200 x 384 mm Dimensions with terminal and plinth (H x W x D) 1296 x 311 x 384 mm Weight 36.5 kg Drive Units High frequency 25mm vented aluminium dome Uni-Q Driver with MAT Mid-range 125mm aluminium cone Uni-Q Driver Low frequency 4 x 165mm hybrid aluminium cone bass drivers General Crossover frequency 330Hz, 2.5kHz Frequency range (-6dB) 30Hz – 50kHz Typical in-room bass response (-6dB) 26Hz Frequency response 46Hz – 28kHz Harmonic distortion <1 33 Hz and above <0.5 80Hz – 20kHz Maximum output 113 dB Amplifier requirements 15-300 Watts Nominal impedance 4 Ohms (min. 3.2 Ohms) Sensitivity 90 dB

Product Description ProAc Response DB3 is a new high-end stand mount loudspeaker available at an affordable price offering good efficiency and a rich sound that belies its compact size. Exceptional Performance DB3 continues the legendary ProAc stand mount tradition and produces an excellent level of sound quality when partnered with high-quality electronics. Featuring a similar cabinet size to that of the Response DB1, there are structural and visual differences including a new bass driver and crossover which were chosen for exceptional performance but at a more affordable price. Superb Bass Extension The new Response DB3 has a wonderfully rich and extended bass quality, loaded with a single reflex port in the rear baffle of the cabinet. The newly designed bass driver with a special surround and dust cap, allows extra information from the voice coil to give a smoother transition of frequencies to the 1" dome tweeter. It is a long throw design with a raised spider and linear motor system and is responsible for a remarkable bass extension. Soft Dome Tweeter The tweeter is ProAc's 1" silk soft dome with special coolant, used in many other ProAc designs, which has a superbly flat response with electrostatic type detail and sweetness. This is combined with a 5” long throw unit incorporating mikapulp cone and a transparent dust cap. Detailed Reproduction The crossover has been designed to seamlessly mate with the tweeter using the finest components on the dedicated circuit board. Multistrand oxygen free copper cable is used throughout which is split for optional Bi-wiring or Bi-amplification The sound quality is what music lovers have come to expect from ProAc with a very natural presentation, excellent detailed, sweet high-frequency reproduction and exceptional soundstage. Stunning Finishes ProAc DB3 is available in the usual choice of standard wood veneer finishes which now includes natural oak. The other standard finishes are black ash, maple, Cherry, silk white or mahogany. Rosewood and ebony finishes are also available at a premium. This wide choice of finishes ensures you find the right style to match your home decor or personal choice. Performance Nominal Impedance: 8 ohms Recommended Amps: 20 to 100W Frequency Response: 38Hz-30kHz Sensitivity: 88.5dB linear (1w @1m) Drivers Bass/mid: 5” long throw Cone material: mikapulp cone Dust cap: Transparent Tweeter: 1” silk dome Dome uses: Special coolant Crossover Circuit board: Finest components Cable: Multistrand oxygen free copper Split: optional Biwiring or Biamp General Mode: Stand mounting Grille: Acoustic transparent crimplene Dimensions (HWD): 320 x 182 x 280mm Weight 19.6lb (8.8kg) each

It’s a Wrap The new HTM82 D4 may be our most compact centre-channel speaker, but it shares the design DNA of its larger siblings, including the Reverse Wrap cabinet and Matrix™ bracing. The combination of the two technologies ensures a quieter, more acoustically efficient and better-sounding speaker than ever. Reverse Wrap cabinet Instead of a conventional loudspeaker box, our cabinets are made from a continuous curved section of wood, with the drive units mounted at the heart of the curvature. This stiffer, more inert structure resists mechanical resonances far better and also ensures better dispersion of sound. Continuum™ cone midrange Introduced as a huge evolutionary change for us in 2015, the Continuum cone midrange drive has swiftly become a fundamental element in every Bowers & Wilkins loudspeaker. With exceptionally low noise, it ensures outstanding resolution without colouration or masking of detail. Decoupled midrange assembly HTM82 D4 has a dedicated midrange cone using three key Bowers & Wilkins technologies: the Continuum cone, Biomimetic Suspension and midrange decoupling, the latter ensuring minimal interference from the operation of the loudspeaker’s bass drivers. The result is outstanding clarity. The science of sound Innovation is at the heart of everything we do. We question, we examine, we understand and then we evolve. We use computer modelling to explore and reimagine every aspect of loudspeaker design. Size & weight Dimensions Height: 289mm (11.4 in) Width: 715mm (28.1 in) Depth: 369mm (14.5 in) Net weight 25.15kg (55.4 lb) Technical details Technical features Diamond tweeter Solid body Tweeter-on-Top Continuum™ cone FST Anti-Resonance plug Biomimetic Suspension Matrix™ Aerofoil™ cone bass units Flowport Description 3-way vented-box system Drive units 1x ø25mm (1in) Diamond dome high-frequency 1x ø130mm (5in) Continuum cone FST midrange 2x ø165mm (6.5in) Aerofoil cone bass units Frequency range 33Hz to 35kHz Frequency response 45Hz to 28kHz (+/-3dB from reference axis) Sensitivity 89dB (on axis at 2.83Vrms at 1m) Harmonic distortion 2nd and 3rd harmonics (90dB,1m on axis) <1% 100Hz – 20kHz <0.3% 100Hz – 20kHz Nominal impedance 8Ω (minimum 3.0Ω) Recommended amplifier power 50W – 200W into 8Ω on unclipped programme Max recommended cable impedance 0.1Ω

AVForums Highly Recommend "Tight, powerful, natural and fast, this subwoofer really delivers on all levels" Home Cinema Choice Best Buy! "Smaller in stature and output than the PB16, but still a stonking performer that's speedier and sounds more controlled. And it's more affordable, too." One Subwoofer to Rule Them All. Introducing the SB16-Ultra. An unrelenting passion for awesome bass performance and engineering perfection guided every aspect of the SB16-Ultra subwoofer’s design. Groundbreaking technology, rigorous design and extreme testing in real world and laboratory environments allowed SVS to achieve massive output levels, extreme low frequency extension, near-perfect frequency response accuracy, and pinpoint transient response. The culmination of all SVS design advancements, SB16-Ultra represents the greatest leap forward in performance and innovation since the inception of subwoofers. Masterful Engineering. 3 Game-Changing Subwoofer Innovations. One of these groundbreaking innovations would’ve been enough to make the 16-Ultra Series an engineering tour-de-force, but the combination of 3 subwoofer firsts propels the SVS SB16-Ultra into the pantheon of all-time great audio products. Massive New 16-inch SVS Ultra Driver with Unprecedented 8-inch Edge Wound Voice Coil. When designing the biggest and most formidable driver ever used in an SVS subwoofer, it was of utmost importance to meet or exceed the same supreme standards of control and accuracy as every other subwoofer SVS manufactures. One huge advancement that allows the SB16-Ultra to handle the crushing force of a 16-inch driver is the 8-inch edge wound voice coil, the largest ever deployed in a consumer subwoofer. This innovation ensures ultra-low distortion, efficient heat dissipation, exceptional linearity and nearly zero power compression. By nature, larger drivers are more difficult to control, but the unprecedented voice coil design ensures accuracy in frequency response and speed in transients without ever sounding boomy. Pushing the driver are four massive, dedicated toroidal ferrite magnets that unleash a staggering 78mm peak to peak excursion and the highest levels of motor force and palpable SPLs. The light and rigid 16-inch Ultra driver cone consists of a premium fiberglass resin composite with optimal stiffness to mass ratio to maximize movement of air and sonic energy without ever distorting or losing control. Stunningly Powerful, New Sledge Amplifier with Fully Discrete MOSFET Output and 1,500 Watts Continuous, 5,000+ Watts Peak Power. Conservatively rated at 1,500 watts continuous, 5,000+ watts peak power, the SB16-Ultra Sledge STA-1500D amplifier’s 64 Amp 200-Volt MOSFETs are the sonic muscle behind arguably the most powerful and highest fidelity subwoofer amplifier ever developed. Discrete MOSFET output results in superior handling and tighter control of the immense amplifier power and represents a major upgrade over the integrated circuits found in nearly all other Class D subwoofers. Effortless power must be harnessed to ensure refined behavior and pristine output at the most demanding drive levels. To achieve this, the SB16-Ultra subwoofer uses the audio industry’s most advanced 50 Mhz Analog Devices Audio DSP with 56bit filtering to handle the nearly limitless power, only unleashing the perfect amount of low frequency energy at just the right time. Innovative New Smartphone App for Subwoofer DSP and Control. Compatible with Apple® and Android® platforms, the innovative SB16-Ultra smartphone app unleashes the full depth, force and nuance of the world’s finest subwoofer. The groundbreaking SVS subwoofer app controls all DSP functions and conveniently stores custom presets. It’s the easiest way ever to fine tune bass surpassing 16Hz at reference volumes from the comfort of your favorite seat. For added convenience, 2-way feedback shows updates in real time on both the app and subwoofer interface and Bluetooth connectivity allows adjustments to be made even when the subwoofer is not in sight. Control is also available via IR remote and an intuitive front panel display. Google Play and the Google Play logo are trademarks of Google Inc. Acoustically Inert, Rigidly Braced Cabinet A subwoofer capable of creating such extreme levels of sonic energy requires an equally robust cabinet design. The SB16-Ultra is built with a double thick MDF front baffle and rigid internal bracing to support the massive drive unit and to ensure an acoustically inert environment. The highly reinforced internal design eliminates any chance of coloration or resonance from the cabinet, even when the deepest low frequencies are played at reference sound pressure levels. SVS Subwoofer Design Philosophy Cabinet Type Forward Firing Sealed Finish Black Oak Inputs Low Level / Line Level RCA / Balanced XLR Outputs Line Level RCA / Balanced XLR Driver SVS 16” Ultra Driver Amplification Sledge STA-1500D Discrete Mofset DSP Amplifier Power 1500 Watts RMS (5kw peak) Frequency Response 16-460 Hz +/- 3dB Dimensions w/grille (H x W x D) 508mm x 495mm x 582mm Boxed Dimensions (H x W x D) 650mm x 700mm x 800mm Weight 55.3Kg

3-way floorstanding speaker Perfect for medium to large sized rooms JBL's own chassis technology A 25 mm magnesium compression tweeter, a 100 mm magnesium compression midrange driver and a 380 mm Alnico magnet woofer ensure dynamic, powerful sound enjoyment and the typical JBL sound. Rear bass reflex port Suitable for amplifiers up to 500 watts Bi-wiring connection terminals The high-quality screw terminals accept speaker cables with banana plugs or cable lugs, as well as bare cable ends. Removable front cover Height-adjustable spikes The spikes derive disruptive vibrations and ensure a clean and differentiated sound. Available in two elegant colors Wood Grain or Zebra Wood. REVIEWS "The K2 S9900 is a miracle of resolution of the first order, plays completely confidently and calmly, has a friendly tonality and is such a well-rounded and finely seasoned work of art that I have rarely experienced." Source: hifitest.de “Large-volume noble floor-standing speaker with pressure chamber drivers for mids and highs. Tweeter with beryllium membrane, bass with Alnico magnet. The JBL sounds monitor-like neutral and crystal clear, even at levels beyond good and bad.” Source: Stereoplay, price/performance: good, very good Version / Color: Zebrano, Wood Grain Recommended amplifier power: up to 500 watts Impedanz: 4 Ohm, 8 Ohm Principle: 3-way, bass reflex, on the back Serie: JBL Serie K2 Drivers: 1x 25mm tweeter, 1x 100mm midrange, 1x 380mm woofer Efficiency: 93dB Frequency response: 48 - 50,000 Hz Item weight: 82.70 kg Length × width × height: 35.00 × 56.00 × 122.00 cm

Sharing the same DNA as Blade One Meta, Blade Two Meta offers all the acoustic prowess and iconic design on a slightly smaller scale. Blade Two Meta features Single Apparent Source technology with four 165mm (6.5 in.) force-cancelling bass drivers and 12th generation Uni-Q® driver array with MAT™. Uncompromised Innovation Obsessed with sound quality and committed to bringing a superior listening experience, our engineers created the revolutionary Concept Blade to showcase KEF’s technology leadership and powers of innovation with no preconceptions and restrictions. Since then, we keep pushing the boundaries of HiFi to create the loudspeaker with the best possible sound. Uniquely KEF. Uniquely coherent. At the heart of Blade lies Single Apparent Source technology; a unique technology that makes the Blade incredibly coherent, with noticeably more precise imaging. The latest version of Blade benefits from our latest acoustic innovation of the 12th generation Uni-Q® with Metamaterial Absorption Technology (MAT™). Engineered and handcrafted in UK Since 1961, we have been creating remarkable award-winning loudspeakers at our UK home in Maidstone, Kent. As our flagship HiFi speakers, Blade is still being designed, engineered, and handcrafted in Maidstone. Design Three-way bass reflex Single apparent source Drive units ​​Uni-Q driver array: HF: 25 mm (1 in.) aluminium dome with MAT MF: 125 mm (5 in.) aluminium cone Bass units: LF: 4 x 165 mm (6.5 in.) aluminium cone, force cancelling Frequency range free field (-6dB) 30Hz -45kHz Frequency range typical in room bass response (-6dB) 25Hz Frequency response (±3dB) 33Hz - 35kHz Crossover frequency 450 Hz, 2.2k Hz Amplifier requirements 50-400W Sensitivity (2.83V/1m) 86dB Harmonic distortion 2nd and 3rd harmonics (90dB, 1m) <0.5% 40Hz - 100kHz <0.2% 200Hz - 2kHz <0.1% 2kHz - 20kHz Maximum output (SPL) (peak sound pressure level at 1m with pink noise) 116dB Impedance 4 Ω (min. 3.2 Ω) Weight 35.5kg (77.8 lbs.) Dimensions - with plinth (H x W x D) 1461 x 338 x 475 mm (57.5 x 13.3 x 18.7 in.) Standard finishes Piano Black/Copper, Piano Black/Grey, Frosted Blue/Blue, Frosted Blue/Bronze, Charcoal Grey/Red, Charcoal Grey/Bronze, Racing Red/Grey, Arctic White/Champagne Downloads Information SheetManualWhite PaperBrochure

At the centre of it all The centre-channel speaker is arguably the most important in home theatre – and the HTM81 D4 has an enviable array of advanced technologies to reinforce that point, including Solid Body tweeter-on-top, a decoupled Continuum™ Cone midrange drive unit and twin 200mm (8-in) Aerofoil™ bass cones. Aerofoil bass cone Our Aerofoil bass cone technology remains an outstanding solution to the conundrum of combining low mass and high stiffness in bass cones, thanks to its carbon-fibre skin and variable-profile foam core. Now, we have added the foam Anti-Resonance Plug for lower distortion and even cleaner bass. Diamond dome tweeter One of our most significant accomplishments over the past two decades, the ultra-stiff, supremely accurate Diamond dome tweeter is the perfect combination of low mass, exceptional stiffness and outstanding accuracy. 15 years after we introduced it, we haven’t found a better tweeter dome technology. Aluminium bass pods HTM81 D4 mounts two Aerofoil bass cones in twin solid aluminium bass pods, each of which is clamped into an aluminium plate fixed to the stiffest part of its curved cabinet. Formed as single pieces of metal, these stiff structures provide the perfect mechanical location for those powerful bass cones. The science of sound Innovation is at the heart of everything we do. We question, we examine, we understand and then we evolve. We use computer modelling to explore and reimagine every aspect of loudspeaker design. Size & weight Dimensions Height: 334mm (13.1 in) Width: 847mm (33.3 in) Depth: 371mm (14.6 in) Net weight 32.20kg (71 lb) Technical details Technical features Diamond tweeter Solid body Tweeter-on-Top Continuum™ cone FST Anti-Resonance plug Biomimetic Suspension Matrix™ Aerofoil™ cone bass units Flowport Description 3-way vented-box system Drive units 1x ø25mm (1in) Diamond dome high-frequency 1x ø150mm (6in) Continuum cone FST midrange 2x ø200mm (8in) Aerofoil cone bass units Frequency range 20Hz to 35kHz Frequency response 28Hz to 28kHz (+/-3dB from reference axis) Sensitivity 90dB (on axis at 2.83Vrms at 1m) Harmonic distortion 2nd and 3rd harmonics (90dB,1m on axis) <1% 80Hz – 20kHz <0.3% 100Hz – 20kHz Nominal impedance 8Ω (minimum 3.0Ω) Recommended amplifier power 50W – 500W into 8Ω on unclipped programme Max recommended cable impedance 0.1Ω

Components The cabinet is made from a heavily damped, thin-wall rigid birch ply carcass, with a 25mm back panel. The bass driver is new, using the same cone technology as the Response D15 but with a revised coil and magnet. Driver Features The tweeter is the same 1" silk dome as used in other ProAc models and the drive units are seamlessly mated with an HQ network designed and built by ProAc. Sound quality from the D2 is one of extreme transparency; a lush and potent bass response and a silky detailed high frequency. The D2 also have a huge sound stage with pinpoint imagery. The speakers are designed to sit on high mass stands from 18" high depending on your seating position. Performance Nominal Impedance: 8 ohms Recommended Amp: 30-150W Freq Response: 30hz-30Khz Sensitivity: 88.5db linear 1W @1M Driver Bass: New 165mm ProAc unit Magnet: Excel Magnet system Bass Cone: glass fibre weave Plug: copper phase plug Tweeter: 1" silk dome Air cooled: + inner damping Crossover HQ network: finest components Optional: bi-wiring/bi-amping Using: oxygen cable General Mode: Stand mount rigid high mass Grill: Acoustic transparent crimplene Dimensions (HWD): 430 x 203 x 260mm Weight: 24 lbs (11kg) /cabinet

Formidable All New SVS 13-inch Driver All-new SVS 13-inch driver is the largest and most advanced available in this price range. The new design is packed with innovations to ensure incredible output and low frequency extension with accuracy in frequency response and pinpoint transient speed. A flat edge wound split-wind voice coil maximizes magnetics to ensure visceral, chest-pounding bass without sacrificing refinement or control. You’re always feeling the full intensity of every song or scene with no distortion or limiting at all volume levels. Massive Power with Precise Control Conservatively rated at 800 watts RMS, 2,500 watts peak power Sledge STA-800D2 amplifier maximizes the full potential of the 13-inch driver with effortless power and absolute control. The innovative design combines the efficiency of a Class D amplifier with the ability to move colossal amounts of current through the fully discrete MOSFETs, enabling immense output with surgical precision resulting in outstanding real-world subwoofer performance at all drive levels. New Rear Panel Intelligent Control Interface Designed specifically for the 3000 Series Subwoofers, the Intelligent Control Interface (ICI) on the rear panel of the 3000 Series cabinets provide control options for the subwoofer’s most critical functions. Adjustments can be made for volume based on listening preferences and content to achieve full and balanced bass response. SVS Subwoofer Smartphone App The 3000 Series subwoofer app is the most convenient way ever to control volume, access multiple DSP functions and program custom presets for one-touch tuning optimized for music, movies, gaming, and more. Adjust crossover frequencies, a three-band parametric EQ, polarity, room gain and more from your favorite seat. SVS SB3000 Subwoofer Specification Colour Finish Premium Black Ash Grille Protective non-resonant steel mesh grille Driver Front-firing 13 inch high-excursion SVS driver Amplifier Rear-mounted amplifier with Intelligent Control Interface(ICI) Ports Yes (Dual 3.5-inch) Cabinet Construction Robust Medium Density Fiberboard (MDF) cabinet construction Cabinet Dimensions H-W-D Without Grille 557mm x 465mm x 596mm With Grille 557mm x 465mm x 596mm Shipped Dimensions (795mm) x (587mm) x (674mm) Weight Unboxed 37.3 kg Shipped Weight 44 kg Included Accessories Protective Non-Resonant Steel Mesh grill | IR Remote Control | High Current 6" Power Cord | Screw-in Iso-elastomer feet

Nothing looks, or sounds, quite like Nautilus. A revolution when it launched and still an icon today. Its ethos informs everything we do. Nautilus comes in three standard colors: midnight blue, black, and silver. We also offer a special service that can match any color from a sample or color reference. Redefining sound The long, tapered damping tubes were a revolution, allowing the drive units to work optimally by gently absorbing stray energy. Shaped by sound At a glance, you can see Nautilus is no ordinary speaker, and after nearly three decades it still defines high-end audio. Making magic Constructing the complex shapes and precision drive units demands decades of experience and exacting attention to detail. Crafting a classic Nautilus speakers are hand-built to order, alongside the 800 Series Diamond™, by a dedicated specialist team in the Worthing factory. Infinite colors Nautilus comes in three standard colors: silver, black and midnight blue. But, as befits such a unique speaker, we also offer a special service that can match any color you specify. Setting the standard for the future The striking spirals and tubes of Nautilus came from our research into making speaker drive units behave as we wanted: this Nautilus Tube technology, for which we won a Queen's Award for Innovation, is now found in almost every speaker we make. Thinking beyond the box Nautilus is quite unlike a conventional box speaker: to package our unique Nautilus tubes for use in the home, our designers developed the striking, and space-efficient, spiral form from which the speaker takes its name. But why the Nautilus tube? We want to hear a speaker driver, not its side-effects – conventional boxes contain sound from the rear of the driver, but bring their own problems. Nautilus tapering tubes soak up wayward energy and reduce resonances to the point of insignificance. Specifications Nautilus™ tube loading Active crossover System 4-way tube-loaded loudspeaker system Drive Units 1x 300mm (12 in) aluminium cone bass 1x 100mm (4 in) aluminium/polymer sandwich cone lower midrange 1x 50mm (2 in) aluminium dome upper midrange 1x 25mm (1 in) aluminium dome high-frequency Frequency range -6dB at 10Hz and 25kHz Dispersion Within 2dB of response on reference axis Horizontal: over 60° arc Vertical: over 10° arc Crossover frequency 220Hz, 880Hz, 3.5kHz Power amplifier requirements 4 channels per speaker, rated100W-300W continuous into 8Ω on unclipped programme (each channel to have identical gain and phase) Dimensions Height: 1210mm (47.6 in) Width: 430mm (16.9in) Depth: 1105mm (43.5 in) Net weight Speaker: 44.5kg (98lb) Plinth: 42kg (92lb) Total: 86.5kg (190lb)

3-Way Floor Standing Loudspeaker • Two 15" (38.1 cm) woofers • 4" (10.2 cm) pure-beryllium diaphragm for crystal-clear highs • 1" (2.5 cm), pure-beryllium diaphragm for extreme highs • Self-charged Crossover network; Provides more transparent and detailed voicing with lower distortion (Class A Operation) • Frequency Response 29 Hz – 60 kHz (half space); 45 Hz – 60 kHz (anechoic) • Recommended Amplifier Power: 500 watts • Sensitivity (2.83V @ 1m) 96dB Nominal Impedance 8 ohms; 5.0 ohms @ 80 Hz; 3.0 ohms @40 kHz • Dimensions (H x W x D): 43.7" x 38" x 18.5" (110.9 cm x 96.5 cm x 47 cm) • Weight: 313 lb (142.1 kg) • Packaged dimensions (H x W x D): 28" x 53.1" x 49.8" (712 x 1350 x 1265 mm) • Packaged weight: 573 lb (260 kg) • Rosewood (RW) Finish with textured carbon fiber baffle. • 120 day lead time This three-way speaker features two 380-millimeter three-ply sandwich cone woofers (Pure-Pulp layers above and below a foam-injected core) for precise, authoritative bass response. Clear highs and mids come from a 100mm driver for pure beryllium compression. A 25mm pure beryllium driver delivers sound up to 60kHz - far beyond the range of human hearing Frequency Response 29Hz – 60kHz (half space); 45Hz – 60kHz (anechoic) Recommended Amplifier Power 500 watts Sensitivity (2.83V @ 1m) 96dB Nominal Impedance 8 ohms; 5.0 ohms @ 80Hz; 3.0 ohms @ 40kHz Crossover Frequencies (Hz) 150Hz (LF1 6dB/octave) 850Hz (LF2 24dB/octave) 20kHz (UHF 24dB/octave) Ultrahigh-frequency Drive Components 1″ (25mm) pure-beryllium compression driver High-frequency Drive Components 4″ (100mm) pure-beryllium compression driver Low-frequency Drive Components Dual 15″ (380mm) three-layer, pure-pulp sandwich/foam core cone woofer Height 43.7” (110.9 cm) Width 38” (96.5 cm) weight 142.1

The new Tablette 10 has cutting edge new drive units, the bass driver has a Paginna Mika cone which is reed leaves mixed with Mika and coated with an acoustic dope. The crossover has been specially designed for a sealed enclosure with a network which shapes the response to give a rich bass and an extremely transparent midrange. The tweeter is our well known 1 inch silk dome used in many of ProAc's other models. During the design several speakers were used as comparison those being the LS3/5a, ProAc D2, Spender BC1 and Quad Esl 57. We urge people to listen and compare with other makes and models as we are sure you will find the music intoxicating. Specifications Nominal Impedance 10 ohms Recommended Amplifiers 5 to 50 watts Frequency Response 55Hz - 30kHz Sensitivity 86 dB linear for 1 watt at 1 metre Bass/Midrange ProAc 5" with Paganni Mika cone, with acoustic coat. Tweeter 1" (25mm) ProAc silk dome air cooled and inner damping Crossover Finest components on dedicated circuit board. Multistrand oxygen free copper cable throughout. Split for optional Bi Wiring or Bi Amplification. Dimensions Height: 12" (305mm), Width: 7" 1/2 (191mm), Depth: 6" 1/4 (159mm) including grille Weight 24lb (11kg) a pair Mode Stand/Shelf mounting Grille Acoustically transparent crimplene Premium Finishes: Rosewood, Ebony.

The world's first Single Apparent Source speaker, now with 12th generation Uni-Q® with MAT™. A bespoke driver array engineered to deliver pristine performance, and capable of raising Blade to new heights of performance. Featuring four 225mm (9 in.) force-cancelling bass drivers, Blade One Meta is the top model in the Blade series. Uncompromised Innovation Obsessed with sound quality and committed to bringing a superior listening experience, our engineers created the revolutionary Concept Blade to showcase KEF’s technology leadership and powers of innovation with no preconceptions and restrictions. Since then, we keep pushing the boundaries of HiFi to create the loudspeaker with the best possible sound. Uniquely KEF. Uniquely coherent. At the heart of Blade lies Single Apparent Source technology; a unique technology that makes the Blade incredibly coherent, with noticeably more precise imaging. The latest version of Blade benefits from our latest acoustic innovation of the 12th generation Uni-Q® with Metamaterial Absorption Technology (MAT™). Engineered and handcrafted in UK Since 1961, we have been creating remarkable award-winning loudspeakers at our UK home in Maidstone, Kent. As our flagship HiFi speakers, Blade is still being designed, engineered, and handcrafted in Maidstone. Design Three-way bass reflex Single apparent source Drive units ​​Uni-Q driver array: HF: 25 mm (1 in.) aluminium dome with MAT MF: 125 mm (5 in.) aluminium cone Bass units: LF: 4 x 225 mm (9 in.) aluminium cone, force cancelling Frequency range free field (-6dB) 27Hz - 45kHz Frequency range typical in room bass response (-6dB) 20Hz Crossover frequency 350Hz, 2kHz Frequency response (±3dB) 35Hz - 35kHz Amplifier requirements 50-400W Sensitivity (2.83V/1m) 88dB Harmonic distortion 2nd and 3rd harmonics (90dB, 1m) <0.5% 40Hz - 100kHz <0.2% 200Hz - 2kHz <0.1% 2kHz - 20kHz Maximum output (SPL) (peak sound pressure level at 1m with pink noise) 117dB Impedance 4 Ω (min. 2.8 Ω) Weight 57.2 kg (126 lbs.) Dimensions - with plinth (H x W x D) 1590 x 363 x 540 mm (62.5 x 14.3 x 21.2 in.) Standard finishes Piano Black/Copper, Piano Black/Grey, Frosted Blue/Blue, Frosted Blue/Bronze, Charcoal Grey/Red, Charcoal Grey/Bronze, Racing Red/Grey, Arctic White/Champagne Downloads Information SheetManualWhite PaperBrochure

The ProAc Tablette range has been in development for almost 40 years. The first speakers in the range were originally released in 1979, and now these 10th generation ProAc Tablette 10 Signature loudspeakers are about to up the game even further. With an all new design, these speakers have been constructed using a thin walled, heavy damped infinite baffle enclosure – the same baffle that was previously used in the BBC LS3/5a. This design method allows the Tablette 10 Signatures to boast an added flexibility in its positioning options, meaning you can now place these loudspeakers directly against the wall – a method of positioning that would not be possible with ported enclosures. Each of the Tablette 10 Signature Loudspeakers includes a new, cutting edge drive unit in order to offer a much better sound reproduction when compared to previous models, and the bass driver uses a Paganni Mika cone. This Paginna Mika cone is constructed using reed leaves mixed with Mika and then coated with an acoustic dope. A specially designed crossover can be found in these loudspeakers, designed for use within a sealed enclosure, and including a network that shapes the response in order to deliver a richer bass and a more transparent midrange. The tweeter found within the speakers is ProAc’s popular 1 inch silk dome. More flexibility in positioning options 10th generation Tablette speaker Paganni Mika bass driver cone New, cutting edge drive units Specially designed crossover Please note that the Tablette 10 Signatures do not come with the stands pictured ProAc Tablette 10 Signature Speakers follow the hugely successful introduction of the Tablette 10 in 2017, sharing many of its proven components. Signature Model This new Signature model uses the same cabinet and ProAc soft dome tweeter utilised in the Tablette 10 but the performance if further enhanced through the addition of a new bass driver made of the same Paginna Mika cone material but with a high-quality copper magnet system and phase plug. Silk Dome Tweeter The tweeter used in the Signature model is ProAc's highly renowned 1" silk dome model which is also used in many of ProAc's other models. During the design, several speakers were used as comparison those being the LS3/5a, ProAc D2, Spender BC1 and Quad Esl 57. Rich and Smooth When designing the Tablette 10, the legendary LS35A design was used for comparison and the resulting ProAc speaker is even less coloured. Tablette 10 Signature not only improves on this but the midrange and bass qualities benefit from a finely tuned crossover designed after many months of listening. This gives it a smoother and more detailed presentation over the standard model which can be clearly heard on various types of music, whether vocal or instrumental. A thin-walled heavy damped infinite baffle enclosure means the Tablette 10 Signature can be positioned with its rear baffle close to a wall on a shelf but will give its best performance when stand-mounted. Cabinet Design Tablette 10 Signature is available in ProAc's 5 standard wood finishes; Black Ash, Cherry, Mahogany, Maple and Silk White along with the Rosewood and Ebony premium finishes. On top of high quality sound, you can be assured you'll get a visually appealing wood design that fits in well with your personal taste or home decor. Brand Proac Product Specifications Nominal Impedance 10 Ohms Rec Amplifiers 5 to 50 WATT Freq Response 55Hz – 30 kHz Sensitivity 86 dB linear for 1 WATT at 1 metre Bass/Midrange Proac 5 inch with Paganni Mika cone, with acoustic coating and coper excel magnet system with solid copper phase plug Tweeter 1 inch (25mm) Proac silk dome air cooled and inner damping Crossover Finest components on dedicated circuit board. Multi-strand oxygen-free copper cable throughout. Split for optional bi-wiring or bi-amplification Dimensions H – 12” (305mm) W – 7” ½ (191mm) D – 6” ¼ (159mm) Weight 24lb (11kg) each Mode Stand mounting recommended. Can be shelf mounted if necessary Grille Acoustically transparent crimplene

An icon born from The Reference Derived from The Reference, the R6 Meta hosts a suite of class-leading technological innovations to deliver exceptional acoustic performance. Decades of experience combine to create an exciting sound which sets the benchmark for future loudspeaker design. Whether you're looking for a home Hi-Fi solution or multi-channel home theatre, the R-Series reveals levels of detail that must be heard to be believed. etamaterial Absorption Technology A complex maze-like structure, each channel efficiently absorbs a specific frequency and when each channel is combined an acoustic 'black hole' is created, absorbing up to 99 percent of unwanted resonances that occur in the rear of the tweeter. You can expect to hear a more natural, pure acoustic tone. The signature KEF sound A refined 12th-generation Uni-Q driver has been implemented to work along with the MAT technology for a design that's specific to the speaker. This is combined with a re-engineered tweeter gap damper which places two rings of porous material to tame imperfections and resonances, greatly improving detail and clarity. Shadow Flare for improved clarity Designed to allow the 12th-generation Uni-Q drivers to work to their optimum, Shadow Flare is a precision-designed surface which extends the waveguide. This means it no longer has line of sight to the cabinet edges, creating a 'shadow region' where diffraction is highest. The result is an incredibly clear high-frequency sweet spot for more detailed listening. Powerful, deep lows Built with a two-part structure, the R6 Meta delivers the most articulate and powerful bass frequencies. A shallow concave aluminium skin is mounted on top of a paper cone with a unique geometry to effectively reduce resonances for a clean, pristine and deep low-end response. A uniform magnetic field is created with the onboard driver system to reduce harmonic distortion. Flexible Decoupled Chassis First used on the Blade and The Reference loudspeakers, the chassis design is employed to ensure the Uni-Q drivers dramatically reduce colouration of the sound by eliminating cabinet vibrations. By decoupling the midrange driver from the chassis, the vibrations are dissipated and transferred into heat, effectively eliminating any unwanted sound. Get the ultimate sonic experience at home With identical Uni-Q driver arrays deployed on the centre speakers and all other R-Series speakers, the R6 Meta is perfectly capable of being used in an LCR configuration. This configuration creates a consistent sound character, maintaining focus on the audio reproduction and not the equipment, making it perfect for a wide range of home-listening environments. Custom-design microfibre grille Made from multiple pieces layered together, this precision-cut grille features 1,801 cut holes to provide a stylish aesthetic to your speakers, all without interfering with the sonic quality. Perfect for matching the look of your speakers to your environment, they also feature burnished edges for a suede-like feel. Features Metamaterial Absorption Technology (MAT) delivers optimised high-frequency response Enhanced 'sweet spot' for evenly dispersed sound with bespoke 12th-generation Uni-Q driver array Harsh high-frequency resonances are tamed with re-engineered tweeter damper Unwanted vibrations are eliminated with flexible internal chassis to decouple internal bracing from drivers Fine-tuned signal path and superior crossover design delivers signature KEF sound Match sound with visuals without interfering with sound reproduction using the specially-designed microfibre grilles Design Three-way closed box Drive Units HF: 25mm (1in.) Vented Aluminium Dome with MAT MF: 125mm (5in.) Aluminium Cone Bass Driver LF: 2x 165mm (6.5in.) hybrid aluminium cone Crossover frequency 500-Hz, 2.4kHZ Frequency range (-6db) 55Hz - 50kHZ Typical in-room bass response (-6dB) 40Hz Frequency response +/-3dB 65Hz - 28kHz Harmonic Distortion (90dB, 1m) <1 65Hz and above Maximum output 111dB Amplifier requirements 15 - 250W Nominal impedance 4 Ohms (min 3.2 Ohms) Sensitivity (2.83V/1m) 88dB Weight 17.8KG Dimensions (H x W x D) 200 x 625 x 339 mm (7.9 x 24.6 x 13.3 in)

The SB4000 subwoofer delivers on the full potential of the Sledge STA-1200D amplifier’s power with precision and control to produce room energising SPLs and effortless low frequency extension with pinpoint accuracy at all drive levels. Dual ferrite magnet motor assembly weighing nearly 40lbs generates immense magnetic force and excursion of the 13.5-inch driver to produce massive low frequency output well below the limits of human hearing. Edge wound voice coil with eight-layer aluminium flat wire minimises distortion and power compression while providing excellent heat dissipation and linearity ensuring precise control. Lightweight and rigid composite cone with premium glass fibre dust cap generate massive output with pinpoint accurate frequency response. Proprietary injection molded gasket and long-throw parabolic surround ensure longevity and allow extreme excursion and SPLs. Chest-thumping slam and low frequency extension below the threshold of human hearing, with refined musicality – a level of subwoofer performance not seen at this price before. The SB4000 Subwoofer's sophisticated DSP amplifier, innovative driver and a sealed box design master room gain and command a space with deeper bass and higher output levels than what is typically possible from a subwoofer of its size. The SB4000 sets all performance benchmarks for a subwoofer and leaves larger and more expensive subs trembling in its wake. Unparalleled Performance Low Frequency Depth, Power and Detail, the SVS SB4000 powered subwoofer demolishes all preconceived notions about subwoofer performance and technology by taking command of any room with deep, effortless bass and adding visceral energy to every listening experience. With trickle down technology from the 16-Ultra Series, named top subwoofers in the world by nearly every audio publication and industry group in 2017, the SB4000 obliterates expectations and delivers a level of unrivaled subwoofer performance only available from SVS. Sledge Amplifier Massive Output, Sophisticated DSP, Advanced Power Management rated conservatively at 1,200 watts RMS, and 4,000+ watts peak power, the SB-4000 Sledge STA-1200D amplifier uses an efficient Class D design combined with fully discrete MOSFET output and a sophisticated Analog Devices DSP engine. The result is a level of effortless power and advanced processing not available from any other powered subwoofer manufacturer. Smartphone App Groundbreaking smartphone app works with Apple iOS® and Android® devices to unleash the full depth, force and nuance of the SB4000 powered subwoofer by controlling all DSP functions including: volume, parametric EQ, low pass filter, phase, polarity, room gain, port tuning, custom presets and system settings. SVS SB4000 Subwoofer Specification Colour Finish Premium Black Ash | Piano Gloss Black Grille Protective non-resonant steel mesh grille Driver Front-firing 13.5" driver Amplifier Rear-mounted amplifier Cabinet Construction Robust Medium Density Fibreboard (MDF) Cabinet Construction Cabinet Dimensions H-W-D Without Grille 465mm x 453mm x 473mm With Grille 465mm x 453mm x 530mm Shipped Dimensions (598mm) x (598mm) x (712mm) Weight Unboxed 46.6kg Shipped Weight 53.45kg Included Accessories Protective Non-Resonant Steel Mesh grill | IR Remote Control | High Current 6" Power Cord | Elastomer Feet

The LS60's sound profile is smooth, consistent, and extremely natural, delivering an incredibly accurate and immersive listening experience. Taking advantage of KEF's innovative technologies, the Single Apparent Source design utilises precise driver calibration to ensure that the entire frequency spectrum appears to radiate from a single point. Taken from their flagship Blade speaker, this feature gives these wireless floorstanding speakers highly accurate imaging and accurate sound across larger space. The LS60's drivers are built with KEF's Uni-Q® driver array, which places its vented tweeter in the acoustic centre of the cone. This combined with their Uni-Core™ woofer design which improves force cancelling drivers to output deeper, accurate bass from smaller cabinets makes these speakers sound truly excellent at all times. This one-two punch of innovative driver design ensures that the LS60's sound is consistent no matter where you are in the room. No more hunting for the best position, your entire space has now become one large sweet spot. The final unique characteristic of the LS60's sound is its Metamaterial Absorption Technology (MAT™). MAT is a complex, winding structure that eliminates unwanted sound from the rear of the speaker drivers, delivering a pure and realistic sound that you'll get lost in instantaneously. Loading a single speaker with all of this staggering technology makes the LS60's some of the most natural sounding floorstanding speakers available. Featuring not just one, but four unique technical innovations in a pair of speakers, the LS60 deliver acoustic excellence for any occasion. Celebrating 60 Years of Innovation LS60 Wireless combines all of KEF's core technology to provide one of the most technologically advanced wireless floorstanding speakers. Designed in Collaboration with Michael Young Minimalistic, and futuristic, the LS60's physical design reflects what KEF are aiming to achieve sonically. The LS60 look and feel natural, and sleek. Single Apparent Source Technology Utilising precise calibration of their drivers, the LS60 gives exceedingly coherent sound that appears to come from a single point, delivering detailed stereo information and accurate sound across a larger space. Uni-Q Driver Design By placing the tweeter accurately at the acoustic centre of the bass/midrange drivers, both units act together as a single point source. This makes for a more even sound distribution, eliminating the need for sweet spots. The LS60 sounds its best absolutely everywhere. Uni-Core Speaker Cones KEF's engineers have iterated on typical force cancelling speaker cones by combining the traditional back-to-back drivers into a single motor system. The overlapping voice coils deliver improved driver excursion, giving low frequencies more depth and output in smaller cabinets. Metamaterial Absorption Technology MAT™ is an advanced, maze-like structure that eliminates unwanted sound from the rear of the driver, giving pure, realistic sound. Designed in collaboration with the Acoustic Metamaterials Group, this feature revolutionises loudspeaker design. Music Integrity Engine The Music Integrity Engine, having been the heart of KEF's previous LS50 Wireless II is a collection of bespoke Digital Signal Processing algorithms. These algorithms are optimised for the Uni-Q drivers, making them deliver a perfectly timed performance, improving imaging and tightening sound for snappy, clear transients. Advanced Amplification The LS60's built-in amplifiers deliver a total of 1400 W of amplification. Class A/B tweeter amplification provides smooth, nuanced treble that fits the LS60's natural, realistic sound. Then, dedicated Class D amplification powering the mid and bass drivers assure powerful, but controlled and articulate low-frequencies. Comprehensive Connectivity The LS60 supports audio streaming from a wide variety of formats. All major music streaming services, a wide range of supported audio formats, and wireless streaming via Chromecast, Bluetooth, or Roon are all options. Plus, wired HDMI, optical, coaxial, and RCA connections, as well as subwoofer outputs allow you to expand and use your system however suits you. Dimensions (HWD per speaker) 1090 x 212 x 394 mm (42.9 x 8.3 x 15.5 in.) with plinth 1042 x 130 x 321 mm (41.0 x 5.1 x 12.6 in.) without plinth Weight (per set) 62.4 kg (138 lbs) Drive Units (per driver) HF: 19 mm (0.75 in.) vented aluminium dome with Metamaterial Absorption Technology MF: 100 mm (4 in.) aluminium cone LF: 4 x 135 mm (5.25 in.) Uni-Core Force Cancelling Driver Frequency Range (-6 dB) 26 Hz - 36 kHz (measured at 85 dB/1 m, depends on EQ settings) Frequency Range (±3 dB) 31 Hz - 24 kHz (measured at 85 dB/1 m, depends on EQ settings) Amplifier Output Power (per driver) HF: 100 W MF: 100 W LF: 500 W Amplifier Class (per driver) HF: Class AB MF: Class D LF: Class D Maximum SPL 111 dB (measured at 1 m) Wireless Streaming Features AirPlay 2 Google Chromecast Roon Ready UPnP Compatible Bluetooth 4.2 Streaming Services Spotify via Spotify Connect Tidal via Tidal Connect Amazon Music Qobuz Deezer QQ Music via QPlay Internet Radio Podcasts Input Resolution Network up to 24bit/384kHz Optical up to 24bit/96kHz Coaxial up to 24bit/192kHz HDMI up to 24bit/192kHz Interspeaker Connection Wireless: all sources resampled to 24bit/96kHz PCM Wired: all sources resampled to 24bit/192kHz PCM Supported Format Types (all inputs) FLAC, WAV, AIFF, ALAC, AAC, WMA, MP3, M4A, LPCM and Ogg Vorbis Supported Format (network) MQA, DSD Power Input 100 – 240VAC 50/60Hz Power Consumption 450W (operating power) Inputs (Primary Speaker) HDMI eARC TOSLINK Optical Digital Coaxial Analog RCA USB Type A (service) RJ45 Ethernet (network) RJ45 Ethernet (interspeaker) Inputs (Secondary Speaker) USB Type A (service) RJ45 Ethernet (interspeaker) Output (Primary Speaker) RCA Subwoofer output Output (Secondary Speaker) RCA Subwoofer output Wi-Fi Network Standard IEEE 802.11a/b/g/n/ac IPv4, IPv6 Wi-Fi Network Frequency Band Dual-band 2.4 GHz / 5 GHz

Crafted. Honed. Perfected. HTM71 S3 Signature features optimised technologies, such as our proprietary decoupled Continuum midrange drive unit and Tweeter-on-Top, plus upgraded bass motor systems, improved capacitors, revised speaker terminals, and a more open tweeter grille mesh, as developed for our 800 Series Signature loudspeakers. Size & Weight Net weight 18.50 kg (40.8 lbs) Dimensions Height: 165mm cabinet only, 233mm including tweeter
Width: 628mm cabinet only
Depth: 318mm cabinet only, 356mm including grille and terminals Technical Details Drive units 1x ø25mm (1in) Decoupled Carbon Dome high-frequency, 1x ø130mm (5in) Continuum cone FST midrange, 2x ø130mm (5in) Aerofoil Profile bass Frequency range -6dB 45Hz - 33kHz Frequency response 50Hz - 28kHz ±3dB Harmonic distortion 2nd and 3rd harmonics (90dB, 1m on axis), <1% 90Hz - 22kHz, <0.5% 120Hz - 20kHz Nominal impedance 8Ω (minimum 3.1Ω) Recommended amplifier power 30W - 200W into 8Ω on unclipped programme Sensitivity 89dB spl (2.83Vrms, 1m) Technical features Decoupled Carbon Dome tweeter, Solid Body Tweeter-on-Top, Continuum™ cone FST™ midrange, Aerofoil™ Profile bass cones, Flowport™ Description 3-way vented-box system Max recommended cable impedance 0.1Ω Finishes Cabinet finishes: Datuk Gloss, Midnight Blue Metallic
Grille finishes: Black

Crafted. Honed. Perfected. Engineered for pristine studio-quality sound at home, the 702 S3 Signature utilises upgraded midrange and low-frequency motor systems, improved capacitors, revised speaker terminals, plus a more open tweeter grille mesh, as developed for our 800 Series Signature loudspeakers. Size & Weight Net weight 35.26 kg (77.7 lbs) Dimensions Height: 1010mm cabinet only, 1138mm including tweeter and plinth
Width: 192mm cabinet only, 290mm including plinth
Depth: 354mm cabinet only, 391mm including grille and terminals, 410mm including plinth Technical Details Drive units 1x ø25mm (1 in) Decoupled Carbon Dome high-frequency, 1x ø150mm (6 in) Continuum cone FST midrange, 3x ø165mm (6.5 in) Aerofoil Profile bass Frequency range -6dB 28Hz - 33kHz Frequency response 46Hz - 28kHz ±3dB Harmonic distortion 2nd and 3rd harmonics (90dB, 1m on axis), <1% 86Hz - 28kHz, <0.5% 110Hz - 20kHz Nominal impedance 8Ω (minimum 3.1Ω) Recommended amplifier power 30W - 300W into 8Ω on unclipped programme Sensitivity 90dB spl (2.83Vrms, 1m) Technical features Decoupled Carbon Dome tweeter, Solid Body Tweeter-on-Top, Continuum™ cone FST™ midrange, Decoupled midrange, Aerofoil™ Profile bass cones, Flowport™ Description 3-way vented-box system Max recommended cable impedance 0.1Ω Finishes Cabinet finishes: Datuk Gloss, Midnight Blue Metallic
Grille finishes: Black