Stara kartonska kutija za fotoaparat ZORKI 4,dosta dobro očuvana.

DISKETE 4 KOMADA drajver za instalaciju windovs 98 , i jos neki drajveri valjda... za stare racunare, koristio sam ih za p1 pre oko 20 godina

Rode MiCon priključak omogućava vam beskrajnu integraciju između Rode HS-1 naglavnog mikrofona, MicPin i lavalier mikrofona sa širokim spektrom raznih wireless sistema. MiCon-4 je dizajniran za spajanje sa sledećim Audio-Technica UnipakTM Body-Pack prijemnicima: 1800,2000,3000.

Kvalitetan, robustan i pouzdan 2 cilindra sa dijametar 30mm Snaga: 12-13,8 V Maksimalna amperaža:  25 A Napaja se direktnim povezivanjem na akumulator vozila i priključak za auto upaljač Izlazni kapacitet: 70 Lit. / min Maksimalni pritisak: 150 PSI Maksimalna temperatura okoline:  60 ° C Minimalna temperatura okoline:  -55 ° C Maksimalni radni ciklus: do 40min bez prestana normalni pritisok za 2-3min. 5m kabl + 25cm gumeno crevo 3 različiti nastavci za ventile bicikli, čamaca, lopte itd.

NA PRODAJU MATICNA PLOCA PENTIJUMA 4...SA INTELOVIM HLADNJAKOM SKINUTO SA PENTIJUMA KOJI JE RADIO

The NTG4 builds on the platform created by RØDE's award-winning NTG1 shotgun microphone. A broadcast-quality directional condenser microphone designed to provide premium audio recording in a versatile range of applications including on-camera and boom mounted. Intuitive Digital Switching Control the in-built high-pass filter, pad and high frequency boost using convenient digital switching on the microphone body. Persistent states ensure your settings are retained when the microphone is switched off. Super Low-Noise The NTG4 & NTG4+ both feature an all-new condenser capsule from RØDE with low noise floor, higher sensitivity and a rich, smooth character. Features Broadcast sound quality Low noise circuitry Condenser transducer Rugged metal construction On-board Power Button and LED High Frequency Boost Button High Pass Filter Button (Flat/75Hz) PAD Button (-10db) Low handling noise Designed and manufactured in Australia Full 10 year warranty with online registration Included accessories RM5 Mic Clip Foam Windshield ZP1 Pouch Specifications Acoustic Principle: Line Gradient Directional Pattern: Super-Cardioid Frequency Range: 20Hz ~ 20,000Hz (selectable HPF @ 75Hz) Sensitivity: -32dB re 1V/Pa (25mV @ 94db SPL) ±2dB @ 1kHz. Output Impedance: 200Ω Equivalent Noise: 16dBA SPL (per IEC651) Maximum Output: 7dBu (@ 1kHz, 1% THD into 1kΩ) Dynamic Range: 119dB (per IEC651) Maximum SPL: 135dB Signal to Noise Ratio: 78dB SPL (per IEC651) Power Req.: 48V, 24V, 12V Phantom Power (4.5mA current draw) Output Connection: 3 pin XLR, balanced output between Pin 2 (+), Pin 3 (-) and Pin 1 (ground) Dimensions: 22 x 225mm Net Weight: 126g

Building on the popularity and acceptance of the RØDE NTG2, the NTG4+ features an all-new condenser capsule with low noise, high sensitivity and the convenience of on-board equalisation/level control via digital switching. The NTG4+ is the very first microphone to feature an in-built battery that provides 150+ hours of operation with the convenience of USB charging. Intuitive Digital Switching Control the in-built high-pass filter, pad and high frequency boost using convenient digital switching on the microphone body. Persistent states ensure your settings are retained when the microphone is switched off. Internal Battery Provides 150+ hours of operation from with a charge time of only two hours. The included MicroUSB cable makes charging simple and convenient, meaning the mic can be charged via a computer, power-brick or even your car. Super Low-Noise The NTG4 & NTG4+ both feature an all-new condenser capsule from RØDE with low noise floor, higher sensitivity and a rich, smooth character. Features Broadcast sound quality Low noise circuitry Condenser transducer Rugged metal construction Internal rechargeable battery with 150 hours operation High Frequency Boost High Pass Filter (0Hz/75Hz) PAD (-10db) Designed and manufactured in Australia Full 10 year warranty (with online registration) Included accessories RM5 Mic Clip Foam Windshield ZP1 Pouch Micro USB Specifications Acoustic Principle: Line Gradient Directional Pattern: Super-Cardioid Frequency Range: 20Hz ~ 20,000Hz (selectable HPF @ 75Hz) Sensitivity: -32dB re 1V/Pa (25mV @ 94db SPL) ±2dB @ 1kHz. Output Impedance: 200Ω Equivalent Noise: 16dBA SPL (per IEC651) Maximum Output: 7dBu (@ 1kHz, 1% THD into 1kΩ) Dynamic Range: 119dB (per IEC651) Maximum SPL: 135dB Signal to Noise Ratio: 78dB SPL (per IEC651) Power Req.: 48V Phantom Power(4.8mA current draw) or internal rechargeable lithium battery. Battery Charger: MicroUSB cable (supplied) Output Connection: 3 pin XLR, balanced output between Pin 2 (+), Pin 3 (-) and Pin 1 (ground) Dimensions: 22 x 278mm Net Weight: 176g

NTG broadcast "shotgun" mikrofon izrađen je na platformi od višestruko nagrađivanog Rode NTG1 mikrofona. Broadcast kvaliteta zvuka usmjerenog kondenzatorskog mikrofona dizajniranog kako bi pružio premium audio snimanje unutar svestranog opsega aplikacija, uključujući i korišćenje s postavljanjem na kameru ili uz pomoć boom nosača. U kompletu dolazi: NTG4 mikrofon, RM5 lulica, ZP1 original torbica za mikrofon i windshield.

NTG+ broadcast "shotgun" mikrofon izrađen je na platformi od višestruko nagrađivanog Rode NTG2 mikrofona. Broadcast kvaliteta zvuka usmjerenog kondenzatorskog mikrofona dizajniranog kako bi pružio premium audio snimanje unutar svestranog opsega aplikacija, uključujući i korišćenje s postavljanjem na kameru ili uz pomoć boom nosača. Potpuno nova kondenzatorska kapsula s niskom nivoom šuma i izuzetnom osetljivosti i pogodnosti prilikom ekvalizacije i kontrolisanja nivoa putem digitalog prekidača. NTG4+ je prvi mikrofon koji ima ugrađenu bateriju koja mu omogućava 150+ radnih sati rada i koja se puni uz pomoć USB kabla. U kompletu dolazi: NTG4+ mikrofon s ugrađenom baterijom, RM5 lulica, ZP1 original torbica za mikrofon, Micro USB Kabl i windshield.

NAJNIŽA CENA U GALAKSIJI - NAZOVITE! Instalaciono pojačalo od 1.000W sa četiri fleksibilna izlazna kanala, namenjeno za instalacijske aplikacije, 1H rack visina. Izuzetno energetski efektivno s Energy Star* certifikatom (superiorno zeleno), Fleksibilni IntelliDrive omogućava snagu od 4 x 250W na konstantnoj 70V voltaži ili niskom otporu (2/4/8 Ohma) na bilo kojem kanalu, ugrađeni 50Hz visokopropusni filter po kanalu dostupan na zadnjem panelu, dizajnirano i projektovano u Švedskoj.

Clarify your sound. You’ve invested in a pair of high-quality studio monitor speakers, and you can’t wait to hear what your music really sounds like. So you place the speakers on a desktop, mixer top, or speaker stands and… yikes! Vibrations and resonant energy travel from your monitors to the supporting surface as the speakers and surface acoustically couple, resulting in unwanted coloration and reduced clarity. Fortunately, you can easily fix the problem with a set of PreSonus ISPD-4 isolation pads. These inexpensive foam pads isolate your speakers from their supporting surface, reducing vibration and improving clarity and midrange resolution. One set fits all. Sold in pairs, each PreSonus ISPD-4 isolation pad can be divided into halves and configured in several ways so you can use them with virtually any near-field studio monitors. For small, vertically placed speakers, use half of an isolator per side or employ the full pad, whichever works best. Place two half-pads side-by-side to accommodate larger speakers or horizontal placement.

Na SVC4.2 možete spojiti do četiri para zvučnika na jedan izlaz pojačala. Vaše pojačalo garantovano neće biti izloženo prekomernom opterećenju. Praktični dugmići na prednjoj ploči omogućavaju vam da posebno podesite jačinu svakog para zvučnika. Ta mogućnost daje do četiri različite zone jačine. Zbog lepog dizajna i dobre završne obrade ovaj uređaj se lako uklapa u svaki prostor .

Small in Size, Huge in Benefits Building on LAB GRUPPEN’s touring reputation for sonic excellence and rock-solid durability, E Series brings a competitive edge to the installation market by adding ultra-compact size, high operating efficiency, output configuration flexibility, and an unprecedented cost-benefit ratio. At the heart of E Series is LAB GRUPPEN’s IDEEA (IntelliDrive Energy Efficient Amplifier) technology. Based around a patented Class D variant output stage, IDEEA produces high power levels with very low distortion while drawing minimal mains current. LAB GRUPPEN’s proprietary Rail Sensing Limiter (RSL™), also exclusive to E Series, greatly reduces signal clipping to ensure high quality audio output at all times. User configurable for Hi-Z (70 V) or Lo-Z, RSL senses rail voltages and optimizes each output for instantaneous load conditions. RSL settings also facilitate asymmetric loading of the channels to optimize performance and efficiency. Total available output power can be allocated among the channels as required by the application. This makes it possible, for example, to drive a small sub on one channel, a number of 70 V ceiling loudspeakers on the second channel, and a pair of full-range low impedance loudspeakers on the two remaining channels. LAB GRUPPEN Performance with Energy Star Compliance LAB GRUPPEN’s IDEEA architecture secures full Energy Star compliance by combining net operating efficiency of greater than 80% with an auto-power-down feature. After 20 minutes with no input signal, the amplifier automatically switches to standby mode – with consumption of less than 1 W – and switches back on when an input signal returns. GPIO facilities enable third-party systems to remotely control and monitor power state via contact closure. Smart Green Credentials with Our IDEEA Platform The now proven IntelliDrive Energy Efficient Amplifier (IDEEA) platform represents the latest evolution of our amplifier design philosophies, drawing from technologies in our flagship PLM Series, to create ingenious contractor solutions with supreme green credentials. Energy Star Qualified By maintaining very low current draw during operating cycles even at high output levels, and reduced power consumption during non-operational cycles, our Energy Star qualified products harness impeccable LAB GRUPPEN sonic performance and robust power output while meeting the rigorous efficiency requirements of current Energy Star certification standards. Flexible Asymmetric Loading Optimize performance and efficiency from each individual unit - allowing the total available output power to be utilized unequally between the channels, or for mono use with all power on a single channel. Enabling you to drive a small sub on one channel and a number of 70 V distributed ceiling loudspeakers on the other. Features 1,000 W amplifier carrying 4 flexible output channels in a high power density 1 rack unit form factor saves rack space and system cost Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs Flexible IntelliDrive permits delivering the 4 x 250 W at constant voltage 70 V or low impedance (2, 4, 8 and 16 Ohms) on any channel Asymmetric channel loading allows mixing and matching loads with different impedances to maximize overall system efficiency and inventory utilization High efficiency amplifier with low power consumption and minimized heat generation lowers demands on the installations' mains distribution and cooling systems IDEEA outputs stage based on proprietary, state-of-the-art Class-D amplifier technology for superior performance Comprehensive fail safe circuit protection ensures continued operation even under reduced operating conditions Auto-standby and auto-power-on reduces power consumption to below 1 W in non-operating cycles Rail Sense Limiter (RSL) greatly reduces signal clipping and ensures simple configuration for constant voltage and low impedance loads Built in 50 Hz high pass filter selectable per channel available on rear panel switch Per channel attenuation knob and signal LED on rear panel for simple commissioning Efficient cooling with temperature-controlled fans with front to back airflow Aluminum front panel with power and temperature LEDs and per-channel signal and limit LEDs GPIO connector with power control and indication for further system integration Balanced high-quality analog inputs and amplifier outputs on detachable screw terminals 10-Year Warranty Program* Designed and engineered in Sweden Specs General Number of amplifier channels: 4 Total output all channels driven: 1000 W Peak output voltage per channel: 100 V / 70 Vrms Max. output current: 14 Arms Max output power (all channels driven) 2 ohms: N.R. 4 ohms: 250 W 8 ohms: 250 W 16 ohms: 250 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 125 W) 70 V: 250 W 100 V: Can deliver 250 W to a 100 V load tapped at 500 W Performance THD 20 Hz - 20 kHz at 1 W:<0.1% THD at 1 kHz and 1 dB below clipping: <0.05% Signal to Noise Ratio: >112 dBA Channel separation (Crosstalk) at 1 kHz: > 70 dB Frequency Response: 2 Hz - 40 kHz Input impedance: 20 kOhm Common Mode Rejection (CMR): 50 dB Output impedance: 25 mOhm Gain, Sensitivity and Limiters Limit and gain switch defining limit and gain (per channel): 2 pos: Lo-Z and 70 V PL for 70 V mode: 100 V VPL for Lo-Z mode: 63.2 V Sensitivity for stated power into 8 Ohm in Lo-Z mode: 4 dBu Sensitivity for 70.7 V out in 70 V mode: 4 dBu Sensitivity for stated power into 4 Ohm in Lo-Z mode: 1 dBu Sensitivity for stated power into 16 Ohm in 70 V mode: 3 dBu Gain in 70 V mode: 35.2 dB Gain in Lo-Z mode: 31.2 dB Level adjustment (per channel): Rear panel potentiometer, from -inf to 0 dB Connectors and Switches Input connectors (per ch.): 3 - pin detachable screw terminals, electronically balanced Output connectors (per ch.): 2 - pin detachable screw terminals High pass filter: Fixed at 50 Hz, switchable per channel Power control: Can be used to go between standby and ON GPI (power control input): Contact closure type, 2-pin detachable screw terminal, controls the power state GPO (power state output): Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state Cooling: Two fans, front-rear airflow, temperature controlled speed Power Nominal voltage: 100 - 240 VAC Operating voltage: 85 – 265 VAC Standby consumption: <1 W Mains connector: IEC inlet Dimensions Dimensions: W: 483 mm (19”), H: 44 mm (1 U), D: 381 mm (15”) Weight Weight: 6.2 kg (13.7 lbs) Finish Finish: Dark grey aluminum front and black steel chassis Approvals Approvals: CE, ANSI/UL 60065 (ETL), CSA, CCC, PSE, Energy Star

NET HP AP-220-MNT-W1 Basic Mount KiT

- Odgovara samo za uobičajeni žičani štampač, ne može da radi sa automatskim štampačem, - Omogućava 4 računara da dele jedan USB uređaj(štampač), bilo koji drugi uređaj sa USB-om, - Samo priključite svoj USB uređaj u USB port na prekidaču za deljenje i povežete 4 računara sa ostala 4 porta, - Opremljen tasterima za svaki port, - Tip interfejsa: 1 USB 2.0 i 4 PC porta, - Kompatibilan sa USB 2.0, - Kompatibilnost sa operativnim sistemom: Windows, Mac , Linux, - Veličina (D x Š x T): pribl. 11 x 7 x 2,5 cm.

Hp J1494A 4-port Console Switch (quartz Gray) - Connect Up To Four Computers To A Single Monitor, Keyboard, And Mouse. Ispravan 4- port kvm switch. Kuciste ima dosta ogrebotina. Bez ikakvih kablova se prodaje.

Kvalitetan 3.5mm džek sa 4 konektora pozlaćen 24k zlato i bakrom za slušalice / zvučnike • Džek 3.5mm sa 4 konektora za slušalice / zvučnike • pozlacen 24k zlatom i bakrom

Hirurški konac Prolene 4/0 za vežbanje.

- Delite 4 USB uređaja između 2 računara, - Ovaj 4-portni USB switch je odličan izbor za deljenje 4 USB uređaja između dva računara, - Idealan je za deljenje štampača ili skenera u okruženju male kancelarije, - Takođe je odličan za upotrebu kod kuće ako imate više računara ili Mac računara, - Prekidač jednim pritiskom, LED označava 2 korisnika, - Lako prebacivanje između 2 računara pomoću dugmeta sa LED indikatorom koji označava aktivan računar, - Veća snaga, - Uključite prekidač preko Micro USB porta za pristup uređajima kao što su eksterni HDD, digitalne video kamere i još mnogo toga, - Podržava više sistema i bez problema, - Kompatibilan sa Windows 10/8/8.1/7 / Vista / XP i Mac OS X, Linux i Chrome OS; Nije potrebna instalacija drajvera za kompatibilne sisteme.

Hirurška igla za creva ACUFIRM Pb 332/4. Nova. 12 komada u pakovanju.

- Povežite štampač sa/do 4 računara i lako se prebacujte između njih, - Ugreen switch ima dugme za napajanje, LED diode na svakom portu i izuzetno je jednostavan za korišćenje, - Pogodnost iznad svega - Povežite do 4 uređaja na switch i prelazite između njih u bilo kom trenutku pomoću dugmeta na vrhu, - Pored svakog kabla koji vodi do određenog računara nalazi se LED dioda, tako da u svakom trenutku možete da vidite koji je uređaj povezan sa štampačem, - Brzi prenos – USB 2.0 obezbeđuje brzo vreme prenosa podataka do 45 MB/sec, tako da su dve sekunde dovoljne za štampanje dokumenta, - Široka kompatibilnost – KVM switch je kompatibilan sa štampačima, memorijskim karticama, miševima, tastaturama, skenerima ili katerima, dok vam njegov ulaz omogućava da ga povežete sa laptopom ili desktop računarom, - Ulazni interfejs: 4 x USB, - Izlazni interfejs: 1 x USB, - Brzina prenosa podataka: 480Mbps, - Plug&play funkcija: Da, - Podržani sistemi: Windows XP/7/8/10/Vista, macOS 8.6 i noviji, - Dimenzije: 97 x 55 x 19,3 mm.

Zoom TPS-4 je tzv. tripod - tronožni stalak za mikrofone. Ima standardne mikrofonske navoje i krasi ga tanki i elegantni dizajn. Zahvaljujući svojoj maloj težini, idealan je za poneti svuda sa sobom, bilo da se radi o terenskom snimanju, konferenciji, intervjuu i sl.

odlicno resenje za PC koji ima malo usb izlaza Komunikacija sa kupcem putem Kupindo poruka, čak i nakon završetka prodaje zbog toga što želim da svu komunikaciju sa kupcem imam dokumentovanu.