Garancija:

PA wall speaker 100 V line technique 5-step rotary switch for 10/6/4/2 W/off Rotary switch can be replaced with a cover plate to avoid accidental changing of the power selection Emergency priority relay White wooden cabinet with protective metal grille Easy wall mounting via supporting plate Ball-proof according to DIN 18032, Part 3

PA wall speaker 100 V line technique 2-way coaxial speaker, providing a high-quality sound 5-step rotary switch for 20/10/5/2.5 W/off Rotary switch can be replaced with a cover plate to avoid accidental changing of the power selection Emergency priority relay White wooden cabinet with protective metal grille Mounting plate for easy wall mounting Ball-proof according to DIN 18032, Part 3

ADDITIONAL INFORMATION PRODUCT CODE MFX1101 BOX QUANTITY 1 SIZE (LXWXH) 13x8x13cm - pipe: 20.5cm - base plate: 20x12.5cm WEIGHT (KG) 4 VOLTAGE 230V POWER 20W CONTROL 230V on/off or DMX by using a switch pack CONSUMPTION CO2 (liquid with a dip pipe) MAX. DISTANCE depending on the hummidity approx. 8 m

Presa za kosu za cik-cak talase Gemei Lokacija: Novi Beograd (Srbija, Beograd) Kategorije: Styler i prese za kosu Garancija: Nije nevadeno Stanje: Novo Tekst oglasa presa za kreiranje teksturisanog (cik-cak) izgleda kose, kao i dodatnog volumena. ODNOS CENA KVALITET - ODLICNO Brand Gemei Type Hair Straightener Technology Tourmaline Voltage 220-240V 50-60Hz Model GM-1953 Cord 360 Degrees Swivel Cord Power 30W Colour Purple and Black Plate Ceramic Mogucnost Licnog Preuzimanja na Novom Beogradu Slanjem Brzom Postom!

Vivanco Indoor Antenna TVF 46UK UHF/VHF/FM 46dbNapajanje 12V  preko adaptera 220V Reinforced indoor antenna for excellent reception of analogue and digital radio and television stations Metal Reflection Shield: Reflection over the metal base plate for best signal reception Adjustable broadband amplifier for best picture and sound quality Extremely energy efficient! Power consumption in standby (stand-by): < 0.3 W Box contents: includes external power supply 12VDC/100 mA with > 1.35 m power cable length

The sound projector with a power capacity of 10 W is fitted with two 13 cm full range speakers and a 100 V transformer with 4 power taps. A robust plastic-coated aluminium housing in RAL9010 and a vandal-resistant aluminium mounting plate ensure a permanent installation of this speaker. The 2-pole ceramic terminal and thermal fuse as well as the waterproof speaker ensure extra operating reliability. With the high protection class IP65, the speaker is also protected against weather influences. It is particularly suitable for the application in corridors and hallways. The speaker complies with British Standard BS 5839, Part 8.

Opis With plates coated with non-stick surface, it’s easy to clean just with a paper. Fast heating process allows you to have your desired barbecue in few minutes. You could even grill the biggest burger due to the big space from upper plate to lower plate. Bon Appetite! Automatic temperature control Easy to clean the heating plates Non-stick coating of the heating plates Heat-insulating handle and housing Power consumption 750 W Voltage and frequency: 220-240 V, 50/60 Hz Automatic temperature control Easy to clean the heating plates Non-stick coating of the heating plates Heat-insulating handle and housing Power consumption 750 W Voltage and frequency: 220-240 V, 50/60 Hz Saobraznost Zagarantovana sva prava kupaca po osnovu zakona o zaštiti potrošača

Circuit: Digital Bypass: Buffered Bypass Audio: Mono Power Supply: 9.6VDC-200mA power adapter included Dimensions (in): 3.65 x 2.0 x 2.0 Current Draw: 100mA Year Released: 2023 The EHX Pico Oceans 3-Verb is an ultra-compact reverb pedal packed with the essentials of ambience with plenty of flexibility and control. This Pico-sized reverberator adds the huge sounds of Spring, Plate, and Hall reverb to any pedalboard while using minimal space. Adjustable decay time, pre-delay / spring length, and tone make the Oceans 3-verb able to create a plethora of spacious sounds. SPRING – pays homage to the classic Fender® 6G15 tube spring reverb PLATE – the lush, warm reverb that got its name as it was originally created by a large metal plate HALL – the rich reverberant sound of a grand concert hall A comprehensive control set allows for tailored sound to any setup. BLEND adjusts from 100% dry to 100% wet. TIME controls the decay time of the reverb. DELAY/SPRING sets the pre-delay time in PLATE and HALL mode or selects between 3 springs lengths in SPRING mode. The TONE control adjusts the overall brightness of the reverb from bright and airy to warm and smoky. Additionally, TAILS bypass can be selected so the reverb continues to decay after the pedal is switched to bypass. This allows for a more natural sounding decay when turn the reverb off. Infinite Reverb can be achieved by maxing out the TIME control in both PLATE or HALL mode or by pressing and holding the footswitch. This creates a building ambient soundscape until you release the footswitch. Compact Pico chassis 3 different reverb types: SPRING, PLATE, & HALL Adjustable Decay, Pre-delay and Tone for flexibility SPRING mode features 3 selectable spring lengths Infinite Reverb function for creating ambient soundscapes Tails Bypass function allows reverb to decay after pedal is bypassed Power supply included

Opis SKU: 26848 Part Number: PCIe TO Gigabit ETH Board (C) Brand: Waveshare Korisne informacije: www.waveshare.com/wiki/PCIe_TO_Gigabit_ETH_Board_(C) Features PCI-E×1 Gen2 mode. Only support PI5B. Network working indicator: Accessing 1000M network: the green indicator keeps blinking. Accessing 100M network: the yellow indicator keeps blinking. Equipped with original RTL8111H high-performance controller. PCIe TO Gigabit ETH Board (C) For Raspberry Pi 5, Supports Raspberry Pi OS, Driver-Free, Plug And Play, Raspberry Pi 5 PCIe Adapter, With Transparent Acrylic Mounting Plate, Side-Mounting Solution PCIe TO Gigabit ETH Board (C) Designed for Raspberry Pi 5 Supports Raspberry Pi OS, Driver-Free, Plug And Play Specifications CONTROLLER RTL8111H ETHERNET PORT RJ45 Gigabit Ethernet PICE INTERFACE PICe x1 GEN2 POWER SUPPLY 5V NETWORK STANDARD 10/100/1000Mbps INDICATOR STATUS accessing 1000M network: the green indicator keeps blinking accessing 100M network: the yellow indicator keeps blinking Connecting To PI5 Via 16PIN Cable Based On 16PIN PCIe Interface Of Raspberry Pi 5 * for reference only, please refer to the Package Content for detailed part list High-Performance Controller Onboard Original High-Performance RTL8111H Chip Supports Raspberry Pi OS, Driver-Free, Plug And Play Comes With Transparent Acrylic Mounting Plate Adopts Side-Mounting Solution To Save Space Above The Raspberry Pi 5 * for reference only, please refer to the Package Content for detailed part list Supports Power Supply Via PCIe Cable Outline Dimensions PACKAGE CONTENT Weight: 0.021 kg PCIe TO Gigabit ETH Board (C) x1 Transparent acrylic mounting plate x1 PH2.0 3PIN cable ~5cm x1 PCIe-Cable-50mm x1 Standoff pack x1

Opis SKU: 26785 Part Number: PCIe TO M.2 Board (C) Brand: Waveshare Korisne informacije: www.waveshare.com/wiki/PCIe_TO_M.2_Board_(C) Features Support NVMe protocol M.2 interface Solid State Drive protocol, high-speed write/read, higher working efficiency. Support PCI-E×1 Gen2 or Gen3 mode. Only support PI5B. Compatible With 2230 / 2242 / 2260 / 2280 Size M.2 Solid State Drive. Onboard working indicator, light-up when powering on, and the ACT status indicator keeps blinking while writing/reading. PCIe To M.2 Adapter Board (C) For Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing, With Transparent Acrylic Mounting Plate, Side-Mounting Solution PCIe To M.2 Board (C) Designed for Raspberry Pi 5 Adapter For NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing, Improves Working Efficiency Connecting To PI5 Via 16PIN Cable Based On 16PIN PCIe Interface Of Raspberry Pi 5 * for reference only, please refer to the Package Content for detailed part list Comes With Transparent Acrylic Mounting Plate Adopts Side-Mounting Solution To Save Space Above The Raspberry Pi 5 * for reference only, please refer to the Package Content for detailed part list NVMe Drive Protocol Support Compatible With 2230 / 2242 / 2260 / 2280 Size M.2 Solid State Drive Supports Gen2 And Gen3 Modes, Supports Booting PI5 From Solid State Drive Multiple Power Supply Methods Supports Power Supply Via PCIe Cable Or 3PIN Cable * Note: uses PCIe cable for power supply by default, you can add 3PIN cable in cases of insufficient power Onboard Dual LED Indicators Easy To Monitor The Working Status Outline Dimensions PACKAGE CONTENT Weight: 0.017 kg PCIe TO M.2 Board (C) x1 Transparent acrylic mounting plate x1 PH2.0 3PIN cable ~5cm x1 PCIe-Cable-50mm x1 Standoff pack x1

HT-REVERB vas može povesti od vaše sobe do arene preko hall, plate, spring, gate i reverse reverb efekata. Lampaška kompresija i harmonici se dodaju korišćenjem Dwell kontrole, i možete switch-evati vreme reverba od kratkog do dugačkog dok svirate. • 8 reverb effects • Genuine valve design • Operates at 300V HT • Unique Dwell control • Manual and Short/Long modes • Stereo • Unique switching operation • High integrity buffered bypass • Power supply included • Silent switching

Type: full colour semiconductor diode laser system Guaranteed optical output: 2000mW Suitable for: indoor laser displays and laser graphics Control signal: ILDA | for Ethernet, ArtNet and SD card see Options below Scanning system: ScannerMAX 506 Compact | 40kpps @ 8° [see Options below] Safety: fully complies with the latest EN 60825-1, FDA regulations and TUV Laser Safety. Weight: 6kg Package includes: power lead, 5M ILDA signal cable, E-STOP remote with 10M cable, set of 4 safety keys, interlock connector, CD with PDF manual. R | G | B [mW]: 340 | 630 | 1100 [*see note] Beam size [mm]: 3.5 x 4 Beam divergence: Modulation: analog, up to 50kHz Power requirements: 100-230V/50Hz Consumption: max. 250VA Operation temperature: 10-40 °C Ingress protection rating: IP54 System features: Power output adjustment for each colour, X & Y axes invert, X & Y size and position, scan-fail safety mode selector, scanning system protection, daisy chain of emergency STOP signal for multiple system "one-hit" operation. Laser safety features: Keyed interlock, emission delay, magnetic interlock, scan-fail safety, V-RAD 506 mechanical shutter | reaction time <20ms, adjustable aperture masking plate. *Due to Advanced Optical Correction technology used in our laser systems the optical power output of each laser colour within the system may slightly differ from the specification of respective laser module(s) installed. This does not affect the guaranteed total output power. Dimensions: Name: CM-1000; 2000; MX-G900; G1800; G3600 Length: 207 Width: 255 Height: 168

http://www.deepcool.com/product/cpucooler/2013-12/7_237.shtml# ?100X25mm fan with PWM function offers a perfect balance between airflow and noise. Radial aluminum heatsink offers highly effective cooling performance. Screw and Back plate installation provides a safe mounting. ?100X25mm fan with PWM function offers a perfect balance between airflow and noise. Radial aluminum heatsink offers highly effective cooling performance. Screw and Back plate installation provides a safe mounting. Application For Intel Socket 95W LGA1156/LGA1155/LGA1150 kuler za procesor cooler master chiftec Core i7/i5/i3 Pentium G Technical Spec Overall Dimension Fan Dimension Net Weight Bearing Type 97.5X97.5X60mm ?100X25mm 375.5g Hydro Bearing Rated Voltage Operating Voltage Started Voltage Rated Current 12VDC 10.8~13.2VDC 7VDC 0.13±10%A(MAX) Power Input Fan Speed Max. Air Flow Noise 1.56W 900±150~2400±10%RPM 42.76CFM 17.8~32.5dB(A)

The high quality paper cone has a smooth, curvilinear profile design that eliminates bell-mode resonances within the intended frequency range. This is carried by a specially treated, dampened double half-roll linen suspension which has been designed to control excursion maintaining the piston action linearity. The 12W500 employs the Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. This results in an extremely linear motor assembly with a reduced tendency for eccentric behavior when driven hard. Voice coil cooling is achieved by incorporating airways between the chassis back plate and the top plate of the magnet, allowing heated air from the voice coil and gap to be channeled away and dissipated by the chassis basket. Key Features 99,5 dB SPL 1W / 1m average sensitivity 65 mm (2,5 in) Interleaved Sandwich Voice coil (ISV) 350 W AES power handling Excellent transient response Improved heat dissipation via unique basket design Ideal for compact two way systems General Specifications Nominal Diameter 300 mm (12 in) Rated Impedance 8 Ohm AES Power 350 W Program Power 500 W Peak Power 1000 W Sensitivity 99,5 dB Frequency Range 50 - 6000 Hz Power Compression @-10dB 0,7 dB Power Compression @-3dB 2,5 dB Power Compression @Full Power 4,1 dB Max Recomm. Frequency 2500 Hz Recomm. Enclosure Volume 50 - 100 lt. (1,77 - 3,53 cuft) Minimum Impedance 6,4 Ohm at 25°C Max Peak To Peak Excursion 22 mm (0,87 in) Voice Coil Diameter 64 mm (2,5 in) Voice Coil winding material aluminum Suspension M-roll, Polycotton Cone Curvilinear, Paper Thiele Small Parameters Fs 46 Hz Re 5,2 Ohm Sd 0,0531 sq.mt. (82,31 sq.in.) Qms 6,02 Qes 0,38 Qts 0,36 Vas 123 lt. (4,34 cuft) Mms 36,5 gr. (0,08 lb) BL 12,1 Tm Linear Mathematical Xmax ± 4 mm (±0,16 in) Le (1kHz) 1,12 mH Ref. Efficiency 1W@1m (half space) 97,2 dB Mounting information Overall diameter 315 mm (12,4 in) N. of mounting holes and bolt 8 Mounting holes diameter 7,15 mm (0,28 in) Bolt circle diameter 296 - 300 mm (11,65 - 11,8 in) Front mount baffle cutout ø 282 mm (11,1 in) Rear mount baffle cutout ø 282 mm (11,1 in) Total depth 141 mm (5,55 in) Flange and gasket thickness 16,5 mm (0,65 in) Net weight 4,5 kg (9,93 lb) Shipping weight 5,7 kg (12,56 lb) Packaging Dimensions 5,7 kg (12,56 lb)

Circuit: Digital Bypass: Buffered Bypass Audio: Mono Power Supply: 9.6VDC-200mA power adapter included Dimensions (in): 4.5 x 2.75 x 2.1 Current Draw: 150mA Year Released: 2018 The EHX Oceans 11 is a compact, affordable pedal packed with advanced functionality and 11 reverb styles ranging from essential to exotic. The EHX Oceans 11’s reverbs are: 1. HALL – the rich reverberant sound of a grand concert hall 2. SPRING – pays homage to the classic Fender® 6G15 tube spring reverb 3. PLATE – the lush, warm reverb that got its name because a large metal plate was originally used to create it 4. REVRS – emulates the quirky reverse reverb effect where a note’s reverb fades-in backwards. (Jimmy Page claims to have invented it.) 5. ECHO –sends a recirculating echo thru the Plate reverb. The crisp clear delays get tastefully smudged by the airy plate reverb 6. TREM – reverb plus tremolo that’s applied to both the wet and dry mix of a Hall reverb, your choice of three different tremolo shapes 7. MOD – modulated reverb, three modes. Chorus laced onto the reverb tails creates a luscious atmospheric effect. Flanger wraps around the reverb tails and weaves a hypnotic tapestry. Chorus and flanger combined. 8. DYNA – Swell, gate and duck. Swell silences your notes’ attacks before blooming the tails back into the soundscape. Gate passes the reverb tail thru a noise gate that opens when it detects playing. (Phil Collins popularized the technique by applying it to drums.) Duck compresses the reverb tail while you’re playing and fades it back in when you’re resting. 9. AUTO-INF – Auto-infinite reverb that triggers a reverb wash for each note or chord. When a new one is struck, the previously resounding reverb crossfades to the new one 10. SHIM – Shimmer generates a rich octave-shifted reverb wash that modulates and blossoms behind your signal 11. POLY – Polyphonic reverb, two configurable bi-directional pitch shifts operating on your pre-reverb signal. Combine dissonant intervals with near infinite decays to create disorienting soundtracks, or choose perfect/major intervals to generate creative harmonies when jumping around a key signature The Oceans 11 features powerful, yet intuitive “hidden” parameters accessible thru its Secondary Knob Mode that let the player take greater control of its effects. An internal Tails switch also provides a choice of whether the reverb effect fades out naturally or stops immediately when the pedal is switched to bypass. In most settings the pedal is also capable of producing infinite reverb which can be played over with a fresh reverb effect complete with adjustable parameters! 11 different reverb types: HALL, SPRING, PLATE, REVRS, ECHO, TREM, MOD, DYNA, AUTO-INF, SHIM and POLY Tails switch. Select whether the reverb fades out naturally or stops immediately when the pedal is switched to bypass Easy access to powerful “hidden” parameters thru Secondary Knob Mode Able to produce infinite reverb you can play over in most settings Power supply included

The fiberglass fiber reinforced, straight-sided ribbed cone assures smooth response with high internal damping. The 100 mm Ø copper voice coil employs the Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. The weight of the windings are evenly distributed, providing a uniform motive drive. The already low distortion and sound quality of 15LW2400 has been further improved by the Double Demodulation Rings (DDR) designed to dramatically reduce the intermodulation and harmonic distortion whilst improving the transient response. Excellent heat dissipation has been achieved by incorporating air channels between the basket and the top plate of the magnet. Further ventilation is provided using air vents in the back plate that direct air into the lower part of the voice coil gap. In order to furtherly increase power handling and reduce power compression figure, 15LW2400 uses the same voice coil ventilation technology developed for our flagship 9000 neodymium transducer series. A low density material air diffractor is placed into the backplate acting as a cooling system, increasing power handling capability and lowering the power compression figure. As a final result the transducer shows 1 dB reduction in full power power compression value if compared to 15LW1401, and a program power handling value of 2400 Watt. 10% reduction in weight have been obtained optimizing the magnetic structure through advanced FEA CAD simulation tools. The 15LW2400 ability to perform properly under inclement weather conditions has been achieved using an exclusive cellulose treatment which gives water repellent properties to both sides of the cone. In addition, an epoxy coating is applied to metal plates in order to resist against the corrosive effects of salts and oxidization. General Specifications Nominal Diameter 380 mm (15 in) Rated Impedance 8 Ohm AES Power 1200 W Program Power 2400 W Peak Power 7000 W Sensitivity 97 dB Frequency Range 40 ÷ 2200 Hz Power Compression @-10dB 0,7 dB Power Compression @-3dB 1,5 dB Power Compression @Full Power 2,2 dB Max Recomm. Frequency 500 Hz Recomm. Enclosure Volume 60 ÷ 130 lt. (2.12 ÷ 4.59 cuft) Max Peak To Peak Excursion 38 mm (1,53 in) Voice Coil Diameter 100 mm (4 in) Voice Coil Winding Material copper Suspension Triple roll, Polycotton Cone Straight ribbed, Fiberglass reinforced treated cellulose Thiele Small Parameters Fs 40 Hz Re 5,3 Ohm Sd 0,090 sq.mt. (139,5 sq.in.) Qms 4,75 Qes 0,32 Qts 0,3 Vas 131 lt. (4.63 cuft) Mms 138 gr. (0,30 lb) BL 24 Tm Linear Mathematical Xmax ± 10 mm (±0,39 in) Le (1kHz) 1,25 mH Ref. Efficiency 1W@1m (half space) 96,4 dB Mounting information Overall diameter 393 mm (15.47 in) N. of mounting holes and bolt 8 Mounting holes diameter 7,15 mm (0,28 in) Bolt circle diameter 371 mm (14.6 in) Front mount baffle cutout ø 354mm (13.93 in) Rear mount baffle cutout ø 360 mm (14.17 in) Total depth 181 mm (7.13 in) Flange and gasket thickness 12,5 mm (0,49 in) Flange and gasket thickness 12,5 mm (0,49 in) Net weight 11,2 kg (24.7 lb) Shipping weight 12,2 kg (26.9 lb) CardBoard Packaging dimensions 405 x 405 x 214 mm (15,94 x 15,94 x 8,43 in)

The deep profile curvilinear cone, made with high strength wood pulp, has been designed to achieve the best possible linearity within its frequency range. The cone surround, made from a linen material, is highly resistant to aging and fatigue. The in-house developed cone treatment is humidity repellent and significantly dampens bell mode resonances. The 75mm (3in) copper edge-wound voice coil assembly is wound on a strong fiberglas former to improve force transmission and power handling. The already low distortion and high sound quality are further improved by the aluminum demodulating ring (SDR) used to reproduce instantaneous peak on mid frequencies, reducing intermodulation distortion. The magnetic structure has been optimized using our FEA CAD software that has maximized the flux density in the voice coil gap. Excellent heat dissipation has also been achieved by incorporating air channels between the basket and the magnetic top plate. Due to the increase in use of audio systems at outdoor events, the ability of the 15W930 to perform in adverse weather conditions or in areas of high humidity is a great advantage. This has been achieved using exclusive treatments which enable the cone and the magnetic plate to resist corrosion and render the cone water repellent at the same time. General Specifications Nominal Diameter 380 mm (15 in) Rated Impedance 8 Ohm AES Power 500 W Program Power 800 W Peak Power 1600 W Sensitivity 98 dB Frequency Range 50 ÷ 3600 Hz Power Compression @-10dB 0,6 dB Power Compression @-3dB 1,9 dB Power Compression @Full Power 2,8 dB Max Recomm. Frequency 1700 Hz Recomm. Enclosure Volume 60 ÷ 140 lt. (2,12 ÷ 4,95 cuft) Minimum Impedance 7,2 ohm at 25°C Max Peak To Peak Excursion 33 mm (1,30 in) Voice Coil Diameter 75 mm (3 in) Voice Coil Winding Material Edgewound Copper Suspension M-roll, Polycotton Cone Curvilinear, humidity repellent Thiele Small Parameters Fs 33 Hz Re 5,5 Ohm Sd 0,086 sq.mt. (132.53 sq.in.) Qms 8,78 Qes 0,23 Qts 0,22 Vas 240 lt. (8,46 cuft) Mms 97 gr. (0,21 lb) BL 22,1 Tm Linear Mathematical Xmax ± 7,5 mm (± 0,30 in) Le (1kHz) 1,47 mH Ref. Efficiency 1W@1m (half space) 97,9 dB Mounting information Overall diameter 393 mm (15,47 in) N. of mounting holes and bolt 8 Mounting holes diameter 7,15 mm (0,28 in) Bolt circle diameter 371 mm (14,6 in) Front mount baffle cutout ø 360 mm (14,17 in) Rear mount baffle cutout ø 354 mm (13,94 in) Total depth 185 mm (7,28 in) Flange and gasket thickness 14 mm (0,55 in) Net weight 7,6 kg (16,7 lb) Shipping weight 9,1 kg (20,06 lb) CardBoard Packaging dimensions 405 x 405 x 252 mm (15,94 x 15,94 x 9.92 in)

Detalji predmeta Stanje Nekorišćeno Description: - USB2.0 to SATA 13 Pin converter allows you to connect CD DVD ROM Driver with SATA 13Pin interface to your computer via USB 2.0 port at speed up to 480Mbps. The extra USB port is for additional power. - Connect for 7+6pin Slimline SATA optical drive to computer via USB port for easy test and data transfer - Support for any Slimline SATA CD/DVD optical drive,USB bus power mode. No external power required - Supports for any Slimline SATA CD/DVD optical drive (7MM/9.5MM/12.7MM). not support Hard disk or desktop drive Compatible with Serial ATA specification revision 2.0 & 1.0.Support USB 2.0 high-speed 480Mbps and full-speed 12Mbps - One USB 2.0 type, a male and one 7+6pin SATA female connectors available - Good Compatible: Can be used in multi plate data exchange,Operating System: Win 98/Me/2000/XP/Win 7/8/10,Easy and Convenient to use Pogledajte sve moje ponude na Kupindu: http://www.kupindo.com/Clan/vogonche/SpisakPredmeta Predmeti koje nudim na Limundu: http://www.limundo.com/Clan/vogonche/SpisakAukcija

Detalji predmeta Stanje Nekorišćeno Description: - USB2.0 to SATA 13 Pin converter allows you to connect CD DVD ROM Driver with SATA 13Pin interface to your computer via USB 2.0 port at speed up to 480Mbps. The extra USB port is for additional power. - Connect for 7+6pin Slimline SATA optical drive to computer via USB port for easy test and data transfer - Support for any Slimline SATA CD/DVD optical drive,USB bus power mode. No external power required - Supports for any Slimline SATA CD/DVD optical drive (7MM/9.5MM/12.7MM). not support Hard disk or desktop drive Compatible with Serial ATA specification revision 2.0 & 1.0.Support USB 2.0 high-speed 480Mbps and full-speed 12Mbps - One USB 2.0 type, a male and one 7+6pin SATA female connectors available - Good Compatible: Can be used in multi plate data exchange,Operating System: Win 98/Me/2000/XP/Win 7/8/10,Easy and Convenient to use Pogledajte sve moje ponude na Kupindu: http://www.kupindo.com/Clan/vogonche/SpisakPredmeta Predmeti koje nudim na Limundu: http://www.limundo.com/Clan/vogonche/SpisakAukcija

Detalji predmeta Stanje Nekorišćeno Description: - USB2.0 to SATA 13 Pin converter allows you to connect CD DVD ROM Driver with SATA 13Pin interface to your computer via USB 2.0 port at speed up to 480Mbps. The extra USB port is for additional power. - Connect for 7+6pin Slimline SATA optical drive to computer via USB port for easy test and data transfer - Support for any Slimline SATA CD/DVD optical drive,USB bus power mode. No external power required - Supports for any Slimline SATA CD/DVD optical drive (7MM/9.5MM/12.7MM). not support Hard disk or desktop drive Compatible with Serial ATA specification revision 2.0 & 1.0.Support USB 2.0 high-speed 480Mbps and full-speed 12Mbps - One USB 2.0 type, a male and one 7+6pin SATA female connectors available - Good Compatible: Can be used in multi plate data exchange,Operating System: Win 98/Me/2000/XP/Win 7/8/10,Easy and Convenient to use Pogledajte sve moje ponude na Kupindu: http://www.kupindo.com/Clan/vogonche/SpisakPredmeta Predmeti koje nudim na Limundu: http://www.limundo.com/Clan/vogonche/SpisakAukcija

Very High Output Neodymium MF Transducer Key Features 102 dB SPL 1W / 1m average sensitivity 45 mm (1,77 in) edgewound aluminum voice coil 180 W AES power handling Neodymium motor assembly Extremely high sound quality Very shallow profile, 58 mm (2,3 in) Suitable for horn and direct radiation midrange applications Description The 6ND410 is a very high output, state-of-the-art midrange product for high quality professional use. The high level of sound quality has been achieved thanks to extensive research by Eighteen Sound engineers which focused on implementing mid frequencies intelligibility. The 6ND410 can be used as a midrange in both horn and direct radiation, closed or reflex enclosures, as small as 2 liters. The extremely powerful external neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange. Consequently, the levels of force factor and power handling are at a top professional level with an optimum power to weight ratio. A consistent heat transfer is guaranteed by the encapsulation of the magnetic structure in the interior of the basket, offering a large contact space between the back plate and the dissipating structure. The curvilinear cone-surround, has been created using computer aided vibrational modelling software to move all undesired bell modes out of the usable frequency range. The 45 mm edge-wound voice coil assembly and terminals have been designed to minimise the moving mass while reinforcing force transmission. The 3 threaded back plate holes give the final user the opportunity to insert an external customised heat sink, if further heat dissipation is required. A proprietary humidity-block cone treatment makes the transducer suitable for outdoor use in adverse weather conditions. In addition, a special coating applied to both the top and back plates makes the 6ND410 far more resistant to the corrosive effects of salts and oxidization. General Specifications Nominal Diameter 152mm (6 in) Rated Impedance 8 Ohm AES Power 180 W Program Power 240 W Peak Power 480 W Sensitivity 102 dB Frequency Range 200 ÷ 8000 Hz Power Compression @-10dB 0,7 dB Power Compression @-3dB 1,2 dB Power Compression @Full Power 1,6 dB Max Recomm. Frequency 5000 Hz Recomm. Enclosure Volume 1 ÷ 5 lt. (0,04 ÷ 0,18 cuft) Minimum Impedance 8,2 Ohm at 25°C Max Peak To Peak Excursion 8 mm (0,31 in) Voice Coil Diameter 44 mm (1,75 in) Voice Coil Winding Material aluminum Suspension Progressive double roll, Polycotton Cone Curvilinear, Paper Thiele Small Parameters Fs 120 Hz Re 5,9 Ohm Sd 0,0143 sq.mt. (20,6 sq.in.) Qms 2,2 Qes 0,27 Qts 0,24 Vas 6,2 lt. (0,22 cuft) Mms 8,2 gr. (0,02 lb) BL 11,6 Tm Linear Mathematical Xmax ± 2 mm (±0,08 in) Le (1kHz) 0,67 mH Ref. Efficiency 1W@1m (half space) 97,9 dB Mounting information Overall diameter 162 mm (6,38 in) N. of mounting holes and bolt 4 Mounting holes diameter 5,5 mm (0,22 in) Bolt circle diameter 170 mm (6,69 in) Front mount baffle cutout ø 148 mm (5,38 in) Rear mount baffle cutout ø 148 mm (5,38 in) Total depth 60 mm (2,3 in) Flange and gasket thickness 9,5 mm (0,37 in) Net weight 1,25 kg (2,76 lb) Shipping weight 1,8 kg (3,97 lb) CardBoard Packaging dimensions 170 x 170 x 80 mm (6,69 x 6,69 x 3,15 in)

KeyFeatures 100,5dB SPL 1W / 1m average sensitivity 65 mm (2,5 in) Interleaved Sandwich Voice coil (ISV) 350 W AES power handling Excellent transient response and cone damping Improved heat dissipation via unique basket design Ideal for compact two way and multiway systems Description The 15W500 is a fine example of a high quality transducer providing the right balance between performance and engineering costs. This ferrite low frequency driver satisfies the demand for a 15" loudspeaker which combines excellent linearity with good sensitivity and power handling characteristics. The 15W500 has been designed for two-way or multi-way reflex systems. The high quality paper cone has a smooth, Eighteen Sound specified curvilinear textured profile design that eliminates bell-mode resonance within the intended frequency range. The cone is carried by a specially treated and dampened multi-roll linen suspension designed to control excursion while maintaining piston action linearity. The 15W500 also employs our Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglas former carries windings on both the outer and inner surfaces to achieve a mass balanced coil. This results in an extremely linear motor assembly with a reduced tendency for eccentric behavior when driven hard. Voice coil cooling has been achieved by incorporating airways between the chassis back plate and the magnetic top plate, allowing heated air from the voice coil and gap to be channeled away and dissipated by the chassis basket. This technology is the result of a meticulous 3D CAD design project. General Specifications Nominal Diameter 380 mm (15 in) Rated Impedance 8 Ohm AES Power 350 W Program Power 500 W Peak Power 1000 W Sensitivity 100,5 dB Frequency Range 50 ÷ 4500 Hz Power Compression @-10dB 0,7 dB Power Compression @-3dB 2,5 dB Power Compression @Full power 4,0 dB Max Recomm. Frequency 3000 Hz Recomm. Enclosure Volume 80 ÷ 200 lt. (2,47 ÷ 5,3 cuft) Minimum Impedance 6 Ohm at 25°C Max Peak To Peak Excursion 23 mm (0,88 in) Voice Coil Diameter 64 mm (2,5 in) Voice Coil Winding Material aluminum Suspension Multiroll, Polycotton Cone Curvilinear ribbed, Paper Thiele Small Parameters Fs 50 Hz Re 5,2 Ohm Sd 0,085 sq.mt. (131,75 sq.in.) Qms 9,64 Qes 0,55 Qts 0,52 Vas 189 lt. (6,68 cuft) Mms 55 gr. (0,12 lb) BL 12,6 Tm Linear Mathematical Xmax ± 4 mm (±0,16 in) Le (1kHz) 1,04 mH Ref. Efficiency 1W@1m (half space) 98,2 dB Mounting information Overall diameter 387 mm (15,23 in) N. of mounting holes and bolt 8 Mounting holes diameter 7,15 mm (0,28 in) Bolt circle diameter 370 - 371 mm (14,55 - 14,6 in) Front mount baffle cutout ø 353 mm (13,90 in) Rear mount baffle cutout ø 357 mm (14,06 in) Total depth 161 mm (6,33 in) Flange and gasket thickness 11,5 mm (0,45 in) Net weight 4,3 kg (9,4 lb) Shipping weight 5,1 kg (11,2 lb) CardBoard Packaging dimensions 405 x 405 x 214 mm (15,94 x 15,94 x 8,43 in)

Opis proizvoda: The 6W powered speaker is equipped with a 165mm full-range loudspeaker chassis and a 100V transformer with 3 power adjustments. The high-density, shock-resistant MDF wood housing in white provides a low resonance sound. A sturdy front grille made of steel guarantees enduring stability. For additional reliability, a 2 pin-ceramic block, a thermal fuse is provided and the speaker chassis is impregnated against wetness. The speaker is also secured with the high protection class IP 54 against the security risks of environmental influences. The speaker is also compliant with the British Standard BS 5839, Part 8. The proven spring clamp on the rear plate ensures a quick mounting on walls. Product: WA 06-165/T-EN54 Power: 6/3/1,5 W Impedance (100V): 1667/3333/6667 ohm Information Frequency Range: 197 - 21.900 Hz Information Frequency Response: 172 - 23.500 Hz Information SPL 1W/1m, peak: 100,6 dB Information SPL , 1W/4m, peak: 88,6 dB Information SPL Pmax/4m, peak: 96,3 dB SPL, rated noise power / 4m: 90,0 dB Information Sensitivity EN54-24, 1W/4m: 81,0 dB Information Sensitivity EN54-24, 1W/1m: 93,0 dB Dispersion -6dB, 500Hz: h=180° v=180° Dispersion -6dB, 1KHz: h=160° v=160° Dispersion -6dB, 2KHz: h=125° v=125° Dispersion -6dB, 4KHz: h=89° v=89° Connector: 2-pin ceramic block Maximum cable cross section: 8mm² Max. cable cross section loop: 2x2mm² Temperature range: -10/+55C° Dimensions: 253x194x82 mm Type A/B: A IP Rating: IP54 Weight (net): 1,95 kg Colour: white Mounting: spring clamp Certificate Number: 1438-CPR-0231