JENO Engine (Jitter Elimination and Noise-shaping Optimization) Jitter is a major cause of distortion in digital systems, and is caused by mis-timing in the master clocks used in digital-to-analog conversion. To eliminate the degradation of sound caused by jitter, Technics has developed an original jitter reduction circuit, comprising a clock generator in the noise-shaping system to reduce jitter in the low-frequency range and a high-precision sample rate converter for suppressing jitter in the high-frequency range. Thus it reduces jitter in an ideal way over the entire frequency range. This works with a newly-developed and original high-precision PWM (Pulse Width Modulation) conversion circuit, optimizing the noise-shaping speed, the degree and requantization number, and the PWM gradation, in order to convert high-resolution signals to PWM without causing any damage to the dynamic range. These new technologies enable new Technics digital amplifier designs to reproduce the natural and delicate nuances of music. GaN-FET Driver (High-speed and Low-impedance Power Devices) In the speaker-driving section of the amplifier, Technics has employed a high-speed GaN (gallium nitride) FET driver device with super-low resistance. This enables the construction of a high-power amp using a single push-pull configuration, allowing the length of the large current carrying signal path to be shortened, and resulting in outstanding linearity regardless of the sound level. LAPC (Load Adaptive Phase Calibration) The impedance of a speaker is not constant: it varies according to frequency, thus altering the loading on an amplifier and therefore potentially the sound. Technics is able to measure an amplifier's frequency amplitude-phase characteristics with speakers connected, and has developed a speaker impedance adaptive optimization algorithm using digital signal processing to achieve ideal impulse response. Correction processing based on the new algorithm achieves a flat frequency response for both amplitude and phase, not possible in conventional amps, and delivering a sound with rich spatial expression. Technics Digital Link (Original Digital Signal Transmission) Some systems use a digital link between source component and pre-amplifier, keeping the digital signal pure as long as possible: Technics Digital Link goes further. It has eliminated the volume control function from the pre-amplifier, and instead transmits the volume control information, together with the audio signal, directly to the power amplifier in digital form. The power amp's jitter reduction circuit reduces any effect of jitter in signal transmission, then performs the volume control immediately before the PWM converter. This new sound transmission interface, Technics Digital Link, supports audio signals and also eradicates inter-channel effects by transmitting the left and right channel signals separately. Technics Digital Link has achieved an ideal amplifier configuration, minimizing any degradation between the pre-amplifier and the power amp, and resulting in superb stereo separation and reproduction of even the most subtle signals. The result is a more detailed and dynamic sound. High-speed Silent Linear Power Supply The accurate reproduction of everything from dynamic and powerful sounds to the low-level signals expressing delicate nuances requires a special power supply in an amplifier. It needs to be both powerful and low-noise, as well as capable of responding instantly to a continuously changing audio signal without any voltage fluctuation. The power supply circuit of an ordinary amp consists of a large-capacity power transformer and a rectifier circuit: after examining ways to achieve ideal voltage and current waveforms, Technics decided to use a choke-input rectification, plus a discrete stabilized power supply circuit. These technologies incorporated in the power supply circuit enable the amp to drive the speakers powerfully under any conditions. Battery Driven Clock Generator The best power supply for delicate circuitry such as the clock generator in the new amplifiers is one entirely isolated from any noise or fluctuations in the mains supply. Technics has extensive experience in circuits using battery isolation, having used them to create ultra-low-noise pre-amplifier stages in past analog amplifiers. Construction Dual Mono Construction The main amplifier layout separates the left and right channel signal paths completely, all the way back to the secondary winding on the power transformer, to prevent mutual interference and also achieve an ideal weight balance. This design gives optimal stereo separation, and also allows the two channels to be laid out in ‘mirror image’, giving equal signal-path lengths for each channel. Signal Path Minimization The length of the signal path is kept as short as possible to improve the signal to noise ratio, reduce potential sources of distortion and interference, and give the most direct communication of the music. High Rigidity Metal Double Chassis To support heavy parts and components and lower the center of gravity for improved stability, the inner chassis of the SE-R1 is made of 3-mm-thick plate, but the amplifier uses a huge, and very heavy, mains transformer: to support this better and reduce vibration, columns of die-cast aluminium are arranged at appropriate intervals between the bottom inner chassis and outer chassis. The external casing is made of a 7-mm-thick aluminium plate to resist the effect of electromagnetic noise. High-quality Parts Large, newly designed speaker terminals enable the connection of thick cables, and even the screws are high precision to ensure they remain tight, giving a firm and reliable cable connection. The insulators are cast iron for high rigidity and an excellent damping effect: this reduces both susceptibility to vibration, and the transmission of any vibration to external devices. Accurate Digital Technology JENO Engine (Jitter Elimination and Noise-shaping Optimization) GaN-FET Driver LAPC (Load Adaptive Phase Calibration) Technics Digital Link High-speed Silent Linear Power Supply Battery Driven Clock Generator Dual Mono Construction High Rigidity Metal Double Chassis Technics Definitive Design Aluminium plain miter joint White LED illuminated large level meter Symmetric structure Output Power 150 W + 150 W (1 kHz, T.H.D. 0.5%, 8 Ω, 20 kHz LPF) 300 W + 300 W (1 kHz, T.H.D. 0.5%, 4 Ω, 20 kHz LPF) Input Sensitivity / Input Impedance UNBALANCED 1.2 V / 47 kΩ, BALANCED 1.2 V / 47 kΩ Frequency Response 1 Hz - 90 kHz (-3 dB, 8 Ω) THD+N 0.05% (1 kHz, 75 W, 8 Ω, 20 kHz LPF) Load Impedance A or B, Bi-wiring: 4-16 Ω, A + B: 8-16 Ω Analog Input Terminal UNBALANCED x 1, BALANCED x 1 Digital Input Terminal Technics Digital Link x 1 Power Supply AC120 V, 60 Hz Power consumption 250 W Dimensions (W x H x D) 480 x 241 x 567 mm 18-7/8 x 9-15/32 x 22-11/32 inch Weight Approx. 54 kg Approx.119 lbs Accessories AC cords, Owner's manual

Opis KAWAI GL-30 polukoncertni klavir Kawai GL-30 polukoncertni klavir je klavir napravljen da nadmaši očekivanja. Vredan model u proslavljenoj liniji klavira serije GL (koju je 2016. magazin MMR proglasio „Proizvodom godine” za globalnu muzičku industriju), GL-30 je instrument visokog kvaliteta sa vrhunskim rasponom tonske ekspresivnosti. Poseduje revolucionarni Millennium III Grand Action sa kompozitima od ugljeničnih vlakana koji muzičaru pružaju osetljiv i konzistentan dodir iz godine u godinu. U fleksibilnoj veličini koja se odlično prilagođava širokom spektru prostora za izvođenje, GL-30 će nadmašiti bilo koji uporedivi klavir. SPECIAL FEATURES Kawai’s Exclusive Millennium III Action – Featuring ABS-Carbon Technology with Carbon Fiber Stretcher Over-Lap Integrated Design (SOLID) – Double-width Stretcher Bar for optimum strength Extended Length Keysticks – For more even response from the front to the back of each key Concert-Length Key Buttons – Doubled length for maximum energy transfer and optimum power Solid Spruce Precision Tapered Soundboard – Permanently crowned for long-term tonal stability Dual-Duplex Scaling – For added tonal richness Solid Brass Agraffes – For even string spacing and easier tuning Multi-Grip 11-Ply Laminated Pin Block V-Pro Plate – Gray Iron with “Crossbone” Design Steel-Reinforced Keyslip for strength and stability to avoid sticking keys Steel-Reinforced, Multi-Laminated Keybed for strength and optimum energy transfer Ultra-slow “Soft Fall” Fallboard Closing System SPECIFICATIONS Size Length 166 cm Width 150 cm Height 102 cm Weight 312 kg Touch White Key Surfaces Acrylic Black Key Surfaces Phenol Action Millennium III Action with Carbon Fiber Hammers All Underfelted Sound Soundboard Solid Spruce, Tapered Agraffes 1-46 keys Duplex Scaling Fore & Back Back Posts 3 Exterior Design Pedals Damper, Sostenuto, Soft Casters Single, Brass Lid Props 2 Fallboard "Soft Fall" Closing System Music Rack Position 5 Positions Other Features: Stretcher Over-Lap Integrated Design (SOLID) Longer Keys Steel-Reinforced Keyslip & Keybed V-Pro Plate Zemlja porekla: Japan Video

Opis Kawai GX-1 polukoncertni klavir Klasični klavir GX-1 je instrument koji uvek prevazilazi očekivanja. Gledajući njegov okvir od 166cm, moglo bi se pretpostaviti da nije dizajniran za situacije visokih performansi, ali GX-1 nikada ne treba potcenjivati. Napravljen je, pre svega, da bude „instrument za izvođenje“. Opremljen istim vrhunskim poboljšanjima koja se nalaze u svim klavirima GX BLAK Performance serije, uključujući revolucionarni Millennium III Grand Action sa kompozitima od karbonskih vlakana i ekskluzivne NEOTEx™ površine dirk,i GX-1 pruža vrhunski dodir i izvanredan opseg tonske ekspresivnosti koji može da parira svakom klaviru na tržištu danas. Pored toga, njegova fleksibilna veličina omogućava mu da se odlično prilagodi širokom spektru prostora za performanse. Kawai’s Exclusive Millennium III Action – Featuring ABS-Carbon Technology with Carbon Fiber Exclusive NEOTEX™ Key Surfaces – With moisture-absorbing properties for greater touch control Konsei Katagi Rim – Utilizing a blend of distinctive hardwoods to achieve an ideal balance of tone Vertically Laminated Bridge with Solid Maple Cap – For enhanced energy transfer Elegant Appointments – Brass Lid Prop and Cups, Brass Finials on Plate, Beveled Lid Edges, Spade Legs Hard Finish Music Desk – To preserve the piano’s beauty Stretcher Over-Lap Integrated Design (SOLID) – Double-width Stretcher Bar for optimum strength Extended Length Keysticks – For more even response from the front to the back of each key Concert-Length Key Buttons – Doubled in length to provide maximum energy transfer and optimum power Solid Spruce Precision Tapered Soundboard – Permanently crowned for long-term stability Advanced Scale Designs – Created in the Shigeru Kawai Research and Development Laboratory Dual-Duplex Scaling – For added tonal richness Multi-Grip Pin Block – Laminated with 11 plies Solid Brass Agraffes – For even string spacing and easier tuning Steel-Reinforced, Multi-Laminated Keybed – For strength and optimum energy transfer Steel-Reinforced Keyslip – For strength and stability that avoids sticking keys V-Pro Plate – Gray Iron with “Crossbone” Design Ultra-slow “Soft Fall” Fallboard Closing System Adjustable Artist Bench (Polished Ebony finish only) KAWAI Ten Year FULL Transferable Manufacturer’s Warranty Video

Opis Kawai GX-2 koncertni klavir Poednik kao najbolji proizvod od Music Inc. Magazine je klasičan salon Grand klavir sa ujednačenim tonom i neprestižnim tonom u svojoj klasi. Sa svojom bogatom istorijom i svetkom popularnošću vrlo rad gost u kućama, školama, i Studio za učenje klavira. Kawai FULL deset godina garancija !!! U cenu nije uracunata dostava, montaza i stimovanje instrumenta Length: 5'11" (180 cm) Width: 5'1" (152 cm) Height: 3'4" (102 cm) Weight: 714 lbs. (324 kg) Winner of the 2017 Product Excellence Award from Music Inc. Magazine, the GX-2 BLAK Classic Salon Grand combines the stately presence of a classic grand with an exquisite clarity of tone unmatched by other pianos in its class. With a rich history of international acclaim, the GX-2 is the popular choice for homes, schools, churches and teaching studios. Kawai’s Exclusive Millennium III Action – Featuring ABS-Carbon Technology with Carbon Fiber Exclusive NEOTEX™ Key Surfaces – With moisture-absorbing properties for greater touch control Konsei Katagi Rim – Utilizing a blend of distinctive hardwoods to achieve an ideal balance of tone Vertically Laminated Bridge with Solid Maple Cap – For enhanced energy transfer Elegant Appointments – Brass Lid Prop and Cups, Brass Finials on Plate, Beveled Lid Edges, Spade Legs Hard Finish Music Desk – To preserve the piano’s beauty Stretcher Over-Lap Integrated Design (SOLID) – Double-width Stretcher Bar for optimum strength Extended Length Keysticks – For more even response from the front to the back of each key Concert-Length Key Buttons – Doubled in length to provide maximum energy transfer and optimum power Solid Spruce Precision Tapered Soundboard – Permanently crowned for long-term stability Advanced Scale Designs – Created in the Shigeru Kawai Research and Development Laboratory Dual-Duplex Scaling – For added tonal richness Multi-Grip Pin Block – Laminated with 11 plies Solid Brass Agraffes – For even string spacing and easier tuning Steel-Reinforced, Multi-Laminated Keybed – For strength and optimum energy transfer Steel-Reinforced Keyslip – For strength and stability that avoids sticking keys V-Pro Plate – Gray Iron with “Crossbone” Design Ultra-slow “Soft Fall” Fallboard Closing System Adjustable Artist Bench (Polished Ebony finish only) KAWAI Ten Year FULL Transferable Manufacturer’s Warranty Video

The PSX’s Class D amplifier section produces a total peak output of 2400W, with 1400W allocated to the 15" subwoofer and 1000W to drive the associated full-range system. Its lightweight, switched-mode power supply auto-ranges to global mains voltages from 100 to 240V 50/60Hz, and Power Factor Correction smoothes out the mains current draw over the whole of the AC waveform. The operating range of the PSX is 48Hz to 150Hz, with a peak SPL capability of 136dB at one metre. Onboard DSP performs delay, crossover and EQ functions, while the PSX plus full-range system can be controlled and monitored from a laptop or wireless tablet PC via intuitive VU-NET™ proprietary software. PC connection can be made directly via micro USB, or via Martin Audio’s proprietary U-NET™ network and Merlin loudspeaker and network management system. An important feature of the PSX is its internal memory, which allows factory ‘plug-and-play’ or user-generated DSP preset ‘snapshots’ of the PSX/full-range combination to be recalled by means of a preset selector button on the rear panel, instead of using computer control. The PSX’s tour-grade plywood enclosure is coated in hard-wearing polyurethane and its Declon® backed steel grille is pre-curved to resist deformation in the field. Practical features include a pole-mount fitting in the top surface, bar handles and protective skids. When stacked, the skids on the base of the upper PSX enclosure align with recesses in the top of the enclosure below. Options included a wheelboard for ease of transportation and a transit cover. For outdoor use, an optional rain cowl is available to protect the amplifier section from rain and direct sun. Acoustical TYPE FREQUENCY RESPONSE (5) MAXIMUM SPL (3) Compact, self-powered 15" reflex loaded subwoofer 48Hz-150Hz ± 3dB -10dB @ 40Hz 133dB continuous, 136dB peak Driver 1 x 15" (380mm)/4" (100mm) voice coil, ultra-long excursion, high efficiency ferrite magnet Rated Power (2) 800W AES, 3200W peak Dispersion Omnidirectional Audio Input CONNECTORS ANALOGUE INPUT IMPEDANCE MAXIMUM ANALOGUE INPUT LEVEL AES/EBU IMPEDANCE Female XLR input, male XLR link output 20kΩ balanced to ground 6.15Vrms (+18dBu), over voltage protected 110 ohms balanced, receive and transmit termination Internal Processing Multi-channel DSP, programmable via network Up to 1 second of delay Sub output: up to 48dB/Oct LPF 8 PEQ/shelving filters Satellite output: up to 48dB/Oct HPF 8 PEQ/shelving filters Preset selection via rear panel switch Network CONNECTORS PROTOCOL PC CONNECTION IP68 rated 8-way, quick-release type U-NET Micro USB or via U-NET and Merlin controller Amplifier Module TYPE PEAK OUTPUT POWER CONNECTOR AVERAGE EFFICIENCY COOLING MAXIMUM AMBIENT TEMPERATURE 2 channel switched-mode, class D 2400W total 1400W PSX subwoofer 1000W full-range satellite system 1 x NL4 output to satellite system 85% Internal fan Temperature controlled external fan 45°C (113°F) for full output Power Supply TYPE AC INPUT OPERATING RANGE AC OVERVOLTAGE TOLERANCE POWER FACTOR NOMINAL POWER CONSUMPTION MAINS CONNECTOR Switch mode, fixed frequency with PFC 100 – 240V ~ AC, 50 - 60Hz 400V AC > 0.95 200W Neutrik® Powercon True1 General ENCLOSURE FINISH PROTECTIVE GRILLE FITTINGS Extensively braced multi-laminate birch-ply Textured black PU coating Black HEX perforated steel, Declon® backed Two skids on base, with mating channels on top M20 top-mounted thread plate for pole Large bar handle on each side Two front-mounted latch plates for wheelboard Optional weather protection cowl IP Rating DIMENSIONS WEIGHT Indoor (without weather protection cowl) IP 25 (with weather protection cowl) (W) 500mm x (H) 565mm x (D) 574mm (674mm with vent flap open) (W) 19.6in x (H) 22.2in x (D) 22.6in (26.6in) 48.2kg (106.2 lbs) 56.7kg (124.9 lbs) inc wheelboard Accessories Variable height pole mount Transit cover with integral plywood lid Wheelboard with 4 x 100mm castors Tour-grade network interconnects Merlin Controller/U-NET Hub

Opis Dodatne informacije Recenzije (0) DJI Ronin 2 Pro Combo sa Ready Rig i ProArm Kit DJI Ronin 2 Pro Combo sa Ready Rig i ProArm Kit Moćan DJI Ronin 2 Pro Combo sa Ready Rig i ProArm Kit postoji da bi filmskim producentima omogućio da snime scene onako kako ih vide u svojoj glavi. Unapređeni motori sa velikim obrtnim momentom omogućuju da gimbal podržava više kamera nego ranije. Otporan je na jake vetrove i G silu kada je postavljen na automobil. Kompatibilne kamere Bilo da je jednostavna DSLR ili neka druga profesionalna kamera sa svim dodacima na njoj, DJI Ronin 2 Pro Combo sa Ready Rig i ProArm Kit će je bez problema stabilizovati. Veći obrtni moment, više snage, ista preciznost Sa osam puta snažnijim motorima nego na prethodnim modelima, DJI Ronin 2 Pro Combo sa Ready Rig i ProArm Kit je stabilan i na brzinama do 75 mph sa kamerom težine do 30lbs. Povećali smo snagu motora , a na kontroli nismo izgubili. Podrška za dodatke Sa novim Hubom za napajanje, dodaci kao što su DJI Focus i sistem za bežični video prenos može dobiti snagu i komunicirati sa Ronin 2 stabilizatorom. Svestranost Ručice sa potpuno novim dizajnom koje se lako skidaju dozvoljavaju da DJI Ronin 2 Pro Combo sa Ready Rig i ProArm Kit stoji sam. Ronin 2 je takođe kompatibilan sa kamerama koje se povezuju kablom, dronovima, kranovima, itd. Lak za korišćenje Jednostavnost DJI Ronin 2 Pro Combo sa Ready Rig i ProArm Kit je neverovatna i lakša nego ikad. Sve od montiranja kamera do balansiranja i podešavanja je uprošćeno za lakše i brže korišćenje. Lakše podešavanje Sva fina podešavanja, koja su bitna za pravilno balasniranje kamere je sada pojednostavljeno. Integrisani ekran Ultra jasni Ekran osetljiv na dodir za podešavanje je integrisan na Ronin 2. Intuitivan software Obimno prerađen i redizajniran, proširena aplikacija za gimbal. Pruža više mogućnosti za rad uz minimalno truda. Inteligentan Povećana inteligencija znači da filmski producenti sada mogu da naprave snimke za koje suranije morali da imaju dodatnu opremu. Integrisan Sistem napajanja je sada potpuno integrisan u DJI Ronin 2 Pro Combo sa Ready Rig i ProArm Kit, koji je u mogućnosti da napaja motore i kameru koja je postavljena sa svim dodacima bez ikakvih dodatnih kablova ili napajanja. Zamena baterija bez gašenja Ronin -a 2 DJI Ronin 2 Pro Combo sa Ready Rig i ProArm Kit ima dve baterije, a i sto tako i mogućnost da radi sa samo jednom. Odnosno u toku rada možete skinuti bateriju koja j prazna i zameniti je punom. Napajanje dodataka Instalirane kamere, monitori, dodaci ili DJI Focus se sada mogu napajati preko integrisanih portova na Ronin 2 gimblu. Pouzdan Svaki deo na DJI Ronin 2 je dizajniran da bude maksimalno pouzdan, izrađen od kvalitetnih materijala i vodootpornih motora. Sve ovo omogućuje da se DJI Ronin 2 Pro Combo sa Ready Rig i ProArm Kit pokaže u najboljem svetlu. Izrađen od karbon fibera karbon fiber obezbeđuje da Ronin 2 funkcioniše i u naj ekstremnijim uslovima. Lagan , istrajan i pouzdan. Baterije sa produženim trajanjem Snažne i otporne u ekstremnim uslovima , baterije sa samozagrevanjem obezbeđuju stabilno napajanje i na temperaturama do -20C. Duple baterije koje mogu da rade nezavisno jedna od druge. Integrisani GPS Ugrađeni GPS obezbeđuje Ronin 2 gimblu informacije od bitnog značaja koje su bitne za pozicioniranje kamere pri većim brzinama. U kutiji: Ronin 2 Gimbal ×1 Ronin 2 Power Hub (w/ Camera Control Module) ×1 Camera Dovetail Plate ×1 Camera Top Cross Bar ×1 Remote Controller (w/ Neckstrap) ×1 TB50 Battery Mount ×1 Intelligent Battery (TB50) ×2 Battery Charger ×1 Battery Charger Power Cable ×1 Quad Charging Hub ×1 Grip (w/ Fold-away Feet and Top Mounting Block) ×1 Accessories Package (Screws & Hex Tool) ×1 Cables Package (Red Power Cable, Arri Alexa Mini Power Cable, CANBUS to 2-pin Power Cable, CANBUS to 5.5mm Power Cable, Triple P-tap Breakout Box, USB Type-C Data Cable, RED RCP Control Cable, Arri Alexa Mini Start/Stop Cable, SDI IN Cable, SDI OUT Cable, Remote Battery Mounting Cable, UART to D-BUS Cable, 1 each.) ×1 Quick Start Guide ×1 Monitor Mounting Bracket ×1 15mm Rod Mount ×1 15mm Rod ×2 Ronin 2 Universal Mount ×1 Water Tight Protective Case ×1 Ronin 2 MotionBlock ×1 Ready Rig Frame x1 Shoulder mounts x2 ProArm Carbon Fiber Support Rods x2 Rear Tension Cables x2 Universal Gimbal Attachments x2 Ready Rig GS Bag x1 Proizvođač: DJI

Series 5 - 530 Speaker Aktivni zvučnik sa Exakt tehnologijom. Your style, your sound Expertly designed to deliver outstanding musical performance in style, the 530 uses Exakt technology and a powerful Isobarik bass system to ensure the music makes as big an impression as the design. Create the perfect look for your home by selecting your Fabrik cover, top plate and stand finish - with so many colours and textiles to choose from, Series 5 complements any interior. All options are available separately, so if you change your décor you can refresh the look. Underneath that stylish exterior is a speaker packed with technology. The 530 integrates Exakt electronics, 300 W of power amps and an incredible Isobarik bass system; not that you’d know it from the elegant curves and discreet size. Place them where they fit best in your room and still enjoy exceptional performance. Space Optimisation+ takes care of optimising the sound for your room's characteristics and chosen speaker location. Add to any Exakt-enabled Linn network music player and enjoy impeccable sound and style from a complete music system that you can customise to perfectly complement your home. Small footprint. Big bass. Linn’s Isobarik bass system lets you enjoy a depth of bass normally associated with much larger speakers by using two bass drive units working in tandem, positioned face-to-face at the foot of the speaker. Bass is directed downwards and radiates out from the speaker through a precisely engineered air gap above the base. The 530 produces incredible bass extension using this system in combination with dual bass ports located on the underside of the cabinet to enable additional airflow. Technical Specifications Fully Integrated Aktiv loudspeaker with built-in Exakt technology Features Exakt Yes On-board Amps 3x 100 W Crossover Exakt digital Speaker Type 3-way floorstanding Space Optimisation Space Optimisation+ Bass System Isobarik Connections Exakt Link x2 Banana/Spade None Drive Units Tweeter Silk dome with anti-resonant chamber Midrange Doped 2-layer slice Bass 2x Isobarik Finishes Standard Fabrik Aubergine, Black, Blueberry, Butterscotch, Paprika, Vanilla Special Fabrik - Harris Tweed Barley, Granite, Grouse, Peat, Spruce Special Fabrik - Timorous Beasties Birdbranch Blueberry, Birdbranch Butterscotch, Napoleon Bee Blueberry, Napoleon Bee Paprika, Thistle Aubergine, Thistle Butterscotch Stand & Top Plate Black, White Dimensions Cabinet Volume 30 litres Width 232 mm Height 954 mm Depth 325 mm Weight 30 kg

Najsnažniji integrisani model iz serije Expert postavljen je na šasiju od stoprocentno čistog bakra, kako bi se poboljšalo odvođenje toplote, dok je kućište izrađeno iz jednog komada glodanog i ručno poliranog aluminijuma. TEHNIČKE KARAKTERISTIKE: Broj kanala: 2 Snaga po kanalu (6 oma): 250 W Ukupna izobličenja: 0,0005 % Audio ulazi: 2x RCA, coax i opt, 1x AES/EBU i USB-B Audio izlazi: 1x preamp Dodatno: Ethernet, Wi-Fi, AirPlay Daljinski upravljač: Da Dimenzije: 400 x 40 x 400 mm Masa: 9,7 kg Raspoložive boje: Silver Overview: 2X250 WATTS UNDER 6Ω A piece of craftmanship for extreme performance. The Expert 250 Pro pushes the limits of power amplification thanks to an exclusive hand-polished casing, equipped with a 100% pure copper bottom plate. In More Depth This is basically the first step into owning a Expert 1000 Pro, you can buy the Expert 250 Pro and at a later date create the ultimate Devialet system by adding another Expert 250 Pro to make the Dual Mono Expert 1000 Pro. General Specifications: RANGE Stereo EXCLUSIVE TECHNOLOGIES ADHV2®, SAM®, AIR®, EVO®, DAC Magic Wire®, RAM®, Core Infinity STREAMING SERVICES UPnP Airplay® Spotify Connect DAISY CHAINING Up to 8 units PHONO STAGE Advanced (MM / MC) PRE-AMPLIFIED OUTPUT Yes (mono / stereo) CASING Hand-polished Carved out from a single aluminium block 100% pure copper bottom plate for optimal thermal dissipation FINISH Dark chrome finish DIMENSION Lenght: 400mm | Width: 400mm | Height: 40mm WEIGHT 9,7Kg The Devialet Expert Pro in More Depth The ultimate audiophile system Expert Pro is the ultimate audiophile system, for the most discerning of music lovers. Well above and beyond an ordinary amplifier, Devialet reinvents and combines for the first time all of the key components of expert playback (preamplifier, amplifier, DAC, streamer, phono stage) in a single and extremely thin slab. Your Expert Pro is unlike any other: set each of the thousands of possible configurations for a unique musical experience. Regardless of the source. Regardless of the speakers. Unmatched performance Devialet technologies reinvent each step of the musical signal chain for never before achieved levels of performance. Pure sound. Explosive dynamics. Absolute silence. Perfect audiophile playback, completely transparent. A rare emotional experience. The performance delivered by Expert Pro is the best ever measured, at all power levels : THD+noise (harmonic distortion) at full power under 6Ω 0.00025% THD at 10W/6Ω 0,0001% Output impedance 0.001Ω Signal-to-noise ratio 133 dB Devialet inventions ADH® analogue-digital hybrid amplification, SAM® system for real-time adaptation of the signal transmitted to the speakers, free, regular updates using the EVO® platform, HD audio stream (wired or wireless) via AIR®, DAC Magic Wire®, RAM® Phono stage... The Expert is Pro system an engineering gem. All Expert Pro systems incorporate all of Devialet's audiophile technologies. 107 patents. 58 awards. The most award-winning audio system of all time. In addition to these technologies exclusive to Devialet, Expert Pro benefits from many major innovations developed for this new line : New ADH Intelligence® New Magic Wire® DAC New Class A Amplifier New Class D Amplifier New Power Supply New Thermal Management Your Expert Pro unlike any other Vinyl turntable, CD player, tuner, computer, smartphone, tablet, NAS, online music services, television : the Expert Pro system elevates all of your music. The Configurator enables you to adjust with absolute precision each setting of your audiophile installation. From defining active sources to setting the specifications of your phono cell, create a system unlike no other in the world A unique listening experience, whatever your preferences may be Regardless of your source and regardless of your speakers, Expert Pro renders your audiophile setup breathtaking. From the most delicate of turntables to the highest quality file of your digital library, Expert Pro allows you to rediscover all your music. COMPUTER CD VINYL MOBILE / TABLET TELEVISION ALL SPEAKERS Speaker Active Matching SAM® For the first time, your speakers operate at peak performance levels while being perfectly protected. No speaker models are exactly the same. Expert Pro sends a signal that is precisely adapted to their acoustical architecture. Displacement, driver excursion, acceleration, speed... with the SAM® technology, the Expert Pro system has perfect knowledge of how your speakers behave. The sensoriality of audiophile refinement A technological gem, the fully omnidirectional Devialet remote enables you to control your installation with the tips of your fingers, with no latency. A joyful experience. Devialet technologies Each Expert Pro system incorporates all of the exclusive technologies invented by Devialet. A revolutionary electronic architecture that radically optimises the entire sound signal path, from its input in the Expert Pro system to its output to your speakers. The key elements of this unique architecture have been thoroughly reviewed for the new Expert Pro line which introduces many major innovations : New ADH Intelligence® New Class A Amplifier New Class D Amplifier New Magic Wire® New Power Supply New Thermal Management These technologies are protected by 107 patents, rewarded by 57 awards and acclaimed by the international audiophile press. ADH® The best of both worlds Invented by Devialet, ADH Intelligence is the first hybrid amplification technology that combines the refinement of analog amplification (Class A) with the power and compactness of digital amplification (Class D). Both types of amplification operate in parallel, for radically increased performance. With Expert Pro, Devialet introduced a new version of the ADH Intelligence®, pushing once again the extreme performance of this unique technology. SAM® The best of your speakers For the first time, the SAM® technology (Speaker Active Matching) enables the precise adaptation of the sound signal to the specifications of your speaker model. This is made possible by the powerful DSP at the heart of each Expert Pro system. These built-in systems protect your speakers and ensure top performance. DAC Magic Wire® The world's shortest signal path The invention of Magic Wire® technology enables Devialet to ensure the world's shortest path between the DAC and speaker connections: 5 cm. To achieve this technological feat, Devialet refined the best digital-to-analog converter to achieve the world’s best performance in noise and distortion levels Switch-mode power supply All the power of current, with complete transparency Supported by a revolutionary switching mode power supply, the Expert Pro system goes from absolute silence to explosive dynamics in the blink of an eye. AIR® High definition streaming Invented for high definition music, AIR® enables you to enjoy all your streaming audio content without compromise (up to 24 bits / 192 kHz), via Ethernet or Wi-Fi, regardless of the format, multimedia player or streaming service that you use. AIR® (Asynchronous Intelligent Route) is the world's most advanced audio streaming technology. RAM® The world’s most advanced phono stage Thanks to the exclusive RAM® (Record Active Matching) technology, your phono stage is entirely and dynamically configurable. It precisely adapts itself to the characteristics of your turntable and your vinyl records. Serving the musical heritage. EVO® The permanent upgrade Expert Pro systems are designed to perpetually remain state-of-the-art. The EVO® platform, the electronic architecture of Expert Pro systems, is fully driven by upgradeable software. As such, your Expert Pro undergoes constant improvement via free, regular updates, for ever improved features and performance. Devialet Remote The weight of audiophile refinement Carved out of a single aluminium block, the Expert Pro Remote enables you to drive your system with unparalleled finesse. Responsive and precise, the Expert Pro Remote offers the best audiophile experience. Using zero latency radio transmission technology, the Expert Pro Remote is fully omnidirectional.

Small wonder 803 D4 may be notably more compact than the 801 D4 or 802 D4, but it still bristles with technical innovation, most obviously in its use of a three-box construction. Its 130mm (5-in) midrange cone is carefully isolated from the impact of its bass cones thanks to its Turbine Head enclosure. Reverse Wrap cabinet Instead of a conventional loudspeaker box, our cabinets are made from a continuous curved section of wood, with the drive units mounted at the heart of the curvature. This stiffer, more inert structure resists mechanical resonances far better and also ensures better dispersion of sound. Enhanced Matrix™ Matrix bracing uses interlocking panels to reinforce loudspeaker cabinet walls in all directions internally, reducing resonance and creating a more believable soundstage. The Matrix assembly in 803 D4 is our best yet, ensuring optimum scale, power and intelligibility. Aluminium bass pods 803 D4 mounts two Aerofoil™ bass cones in twin solid aluminium bass pods, each of which is clamped into an aluminium plate fixed to the stiffest part of its curved cabinet. Formed as single pieces of metal, these stiff structures provide the perfect mechanical location for those powerful bass cones. The science of sound Innovation is at the heart of everything we do. We question, we examine, we understand and then we evolve. We use computer modelling to explore and reimagine every aspect of loudspeaker design. Learn more about all the technologies that combine to make 800 Series Diamond™ so special here. There are few speakers more revered throughout the music industry than the volume-pumping, chicly-designed 800 Series Diamond range. Abbey Road recording studios uses them; which should tell you all you need to know. Gentlemen's Journal Step up for more power 803 D4 features all the most iconic ingredients in the 800 Series Diamond range including, of course, that famous headed enclosure. It is, however, smaller than its other siblings. Step up to the 802 D4, and you’ll get both larger 200mm (8-in) bass cones and a larger 150mm (6-in) midrange driver. Size & weight Dimensions Height: 1165mm (45.9 in) Width: 357mm (14.1 in) Depth: 511mm (20.1 in) Net weight 62.15kg (137 lb) Technical details Technical features Diamond tweeter Solid body Tweeter-on-Top Continuum™ cone FST Anti-Resonance plug Biomimetic Suspension Turbine™ Head Matrix™ Aerofoil™ cone bass units Flowport Description 3-way vented-box system Drive units 1x ø25mm (1in) Diamond dome high-frequency 1x ø130mm (5in) Continuum cone FST midrange 2x ø180mm (7in) Aerofoil cone bass units Frequency range 16Hz to 35kHz Frequency response 19Hz to 28kHz (+/-3dB from reference axis) Sensitivity 90dB (on axis at 2.83Vrms at 1m) Harmonic distortion 2nd and 3rd harmonics (90dB,1m on axis) <1% 80Hz – 20kHz <0.3% 100Hz – 20kHz Nominal impedance 8Ω (minimum 3.0Ω) Recommended amplifier power 50W – 500W into 8Ω on unclipped programme Max recommended cable impedance 0.1Ω

Small wonder 803 D4 may be notably more compact than the 801 D4 or 802 D4, but it still bristles with technical innovation, most obviously in its use of a three-box construction. Its 130mm (5-in) midrange cone is carefully isolated from the impact of its bass cones thanks to its Turbine Head enclosure. Reverse Wrap cabinet Instead of a conventional loudspeaker box, our cabinets are made from a continuous curved section of wood, with the drive units mounted at the heart of the curvature. This stiffer, more inert structure resists mechanical resonances far better and also ensures better dispersion of sound. Enhanced Matrix™ Matrix bracing uses interlocking panels to reinforce loudspeaker cabinet walls in all directions internally, reducing resonance and creating a more believable soundstage. The Matrix assembly in 803 D4 is our best yet, ensuring optimum scale, power and intelligibility. Aluminium bass pods 803 D4 mounts two Aerofoil™ bass cones in twin solid aluminium bass pods, each of which is clamped into an aluminium plate fixed to the stiffest part of its curved cabinet. Formed as single pieces of metal, these stiff structures provide the perfect mechanical location for those powerful bass cones. The science of sound Innovation is at the heart of everything we do. We question, we examine, we understand and then we evolve. We use computer modelling to explore and reimagine every aspect of loudspeaker design. Learn more about all the technologies that combine to make 800 Series Diamond™ so special here. There are few speakers more revered throughout the music industry than the volume-pumping, chicly-designed 800 Series Diamond range. Abbey Road recording studios uses them; which should tell you all you need to know. Gentlemen's Journal Step up for more power 803 D4 features all the most iconic ingredients in the 800 Series Diamond range including, of course, that famous headed enclosure. It is, however, smaller than its other siblings. Step up to the 802 D4, and you’ll get both larger 200mm (8-in) bass cones and a larger 150mm (6-in) midrange driver. Size & weight Dimensions Height: 1165mm (45.9 in) Width: 357mm (14.1 in) Depth: 511mm (20.1 in) Net weight 62.15kg (137 lb) Technical details Technical features Diamond tweeter Solid body Tweeter-on-Top Continuum™ cone FST Anti-Resonance plug Biomimetic Suspension Turbine™ Head Matrix™ Aerofoil™ cone bass units Flowport Description 3-way vented-box system Drive units 1x ø25mm (1in) Diamond dome high-frequency 1x ø130mm (5in) Continuum cone FST midrange 2x ø180mm (7in) Aerofoil cone bass units Frequency range 16Hz to 35kHz Frequency response 19Hz to 28kHz (+/-3dB from reference axis) Sensitivity 90dB (on axis at 2.83Vrms at 1m) Harmonic distortion 2nd and 3rd harmonics (90dB,1m on axis) <1% 80Hz – 20kHz <0.3% 100Hz – 20kHz Nominal impedance 8Ω (minimum 3.0Ω) Recommended amplifier power 50W – 500W into 8Ω on unclipped programme Max recommended cable impedance 0.1Ω

Small wonder 803 D4 may be notably more compact than the 801 D4 or 802 D4, but it still bristles with technical innovation, most obviously in its use of a three-box construction. Its 130mm (5-in) midrange cone is carefully isolated from the impact of its bass cones thanks to its Turbine Head enclosure. Reverse Wrap cabinet Instead of a conventional loudspeaker box, our cabinets are made from a continuous curved section of wood, with the drive units mounted at the heart of the curvature. This stiffer, more inert structure resists mechanical resonances far better and also ensures better dispersion of sound. Enhanced Matrix™ Matrix bracing uses interlocking panels to reinforce loudspeaker cabinet walls in all directions internally, reducing resonance and creating a more believable soundstage. The Matrix assembly in 803 D4 is our best yet, ensuring optimum scale, power and intelligibility. Aluminium bass pods 803 D4 mounts two Aerofoil™ bass cones in twin solid aluminium bass pods, each of which is clamped into an aluminium plate fixed to the stiffest part of its curved cabinet. Formed as single pieces of metal, these stiff structures provide the perfect mechanical location for those powerful bass cones. The science of sound Innovation is at the heart of everything we do. We question, we examine, we understand and then we evolve. We use computer modelling to explore and reimagine every aspect of loudspeaker design. Learn more about all the technologies that combine to make 800 Series Diamond™ so special here. There are few speakers more revered throughout the music industry than the volume-pumping, chicly-designed 800 Series Diamond range. Abbey Road recording studios uses them; which should tell you all you need to know. Gentlemen's Journal Step up for more power 803 D4 features all the most iconic ingredients in the 800 Series Diamond range including, of course, that famous headed enclosure. It is, however, smaller than its other siblings. Step up to the 802 D4, and you’ll get both larger 200mm (8-in) bass cones and a larger 150mm (6-in) midrange driver. Size & weight Dimensions Height: 1165mm (45.9 in) Width: 357mm (14.1 in) Depth: 511mm (20.1 in) Net weight 62.15kg (137 lb) Technical details Technical features Diamond tweeter Solid body Tweeter-on-Top Continuum™ cone FST Anti-Resonance plug Biomimetic Suspension Turbine™ Head Matrix™ Aerofoil™ cone bass units Flowport Description 3-way vented-box system Drive units 1x ø25mm (1in) Diamond dome high-frequency 1x ø130mm (5in) Continuum cone FST midrange 2x ø180mm (7in) Aerofoil cone bass units Frequency range 16Hz to 35kHz Frequency response 19Hz to 28kHz (+/-3dB from reference axis) Sensitivity 90dB (on axis at 2.83Vrms at 1m) Harmonic distortion 2nd and 3rd harmonics (90dB,1m on axis) <1% 80Hz – 20kHz <0.3% 100Hz – 20kHz Nominal impedance 8Ω (minimum 3.0Ω) Recommended amplifier power 50W – 500W into 8Ω on unclipped programme Max recommended cable impedance 0.1Ω

Small wonder 803 D4 may be notably more compact than the 801 D4 or 802 D4, but it still bristles with technical innovation, most obviously in its use of a three-box construction. Its 130mm (5-in) midrange cone is carefully isolated from the impact of its bass cones thanks to its Turbine Head enclosure. Reverse Wrap cabinet Instead of a conventional loudspeaker box, our cabinets are made from a continuous curved section of wood, with the drive units mounted at the heart of the curvature. This stiffer, more inert structure resists mechanical resonances far better and also ensures better dispersion of sound. Enhanced Matrix™ Matrix bracing uses interlocking panels to reinforce loudspeaker cabinet walls in all directions internally, reducing resonance and creating a more believable soundstage. The Matrix assembly in 803 D4 is our best yet, ensuring optimum scale, power and intelligibility. Aluminium bass pods 803 D4 mounts two Aerofoil™ bass cones in twin solid aluminium bass pods, each of which is clamped into an aluminium plate fixed to the stiffest part of its curved cabinet. Formed as single pieces of metal, these stiff structures provide the perfect mechanical location for those powerful bass cones. The science of sound Innovation is at the heart of everything we do. We question, we examine, we understand and then we evolve. We use computer modelling to explore and reimagine every aspect of loudspeaker design. Learn more about all the technologies that combine to make 800 Series Diamond™ so special here. There are few speakers more revered throughout the music industry than the volume-pumping, chicly-designed 800 Series Diamond range. Abbey Road recording studios uses them; which should tell you all you need to know. Gentlemen's Journal Step up for more power 803 D4 features all the most iconic ingredients in the 800 Series Diamond range including, of course, that famous headed enclosure. It is, however, smaller than its other siblings. Step up to the 802 D4, and you’ll get both larger 200mm (8-in) bass cones and a larger 150mm (6-in) midrange driver. Size & weight Dimensions Height: 1165mm (45.9 in) Width: 357mm (14.1 in) Depth: 511mm (20.1 in) Net weight 62.15kg (137 lb) Technical details Technical features Diamond tweeter Solid body Tweeter-on-Top Continuum™ cone FST Anti-Resonance plug Biomimetic Suspension Turbine™ Head Matrix™ Aerofoil™ cone bass units Flowport Description 3-way vented-box system Drive units 1x ø25mm (1in) Diamond dome high-frequency 1x ø130mm (5in) Continuum cone FST midrange 2x ø180mm (7in) Aerofoil cone bass units Frequency range 16Hz to 35kHz Frequency response 19Hz to 28kHz (+/-3dB from reference axis) Sensitivity 90dB (on axis at 2.83Vrms at 1m) Harmonic distortion 2nd and 3rd harmonics (90dB,1m on axis) <1% 80Hz – 20kHz <0.3% 100Hz – 20kHz Nominal impedance 8Ω (minimum 3.0Ω) Recommended amplifier power 50W – 500W into 8Ω on unclipped programme Max recommended cable impedance 0.1Ω

Absolute elegance 802 D4’s svelte proportions and beautiful painted or real-wood-veneer finishes make for an elegant living-room companion – but one that doesn’t compromise on performance. Perfect for reference-grade stereo listening and an excellent choice in home theatre applications. Aerofoil™ bass cone Our Aerofoil bass cone technology remains an outstanding solution to the conundrum of combining low mass and high stiffness in bass cones, thanks to its carbon-fibre skin and variable-profile foam core. Now, we have added the foam Anti-Resonance Plug for lower distortion and even cleaner bass. Aluminium top-plate Every stereo model in the new 800 Series Diamond™ range has a significantly upgraded cabinet with an all-new aluminium top-plate. This also provides a perfect mounting point for all-new Leather by Connolly trim, with luxurious black leather for dark cabinets and light grey for lighter finishes. Decoupled midrange assembly Like its floor-standing siblings in the new range, 802 D4 has a dedicated midrange cone using three key Bowers & Wilkins technologies: the Continuum™ cone, Biomimetic Suspension and midrange decoupling, the latter ensuring minimal interference from the operation of the loudspeaker’s bass drivers. The science of sound Innovation is at the heart of everything we do. We question, we examine, we understand and then we evolve. We use computer modelling to explore and reimagine every aspect of loudspeaker design. Learn more about all the technologies that combine to make 800 Series Diamond so special here. The Bowers & Wilkins 802 D4 produces less inherent sound than virtually any other loudspeaker, and reproduces music as it was originally recorded, completely unclouded. avguide.ch One of our best 802 D4 is a very special loudspeaker in its own right, with a thrilling blend of performance and style that other loudspeakers will find hard to emulate. Only one model in our range can best it – the flagship 801 D4, which has 250mm (10-in) bass cones in a more substantial low-frequency enclosure. Size & weight Dimensions Height: 1218mm (48 in) Width: 413mm (16.3 in) Depth: 602mm (23.7 in) Net weight 88.10kg (194.2 lb) Technical details Technical features Diamond tweeter Solid body Tweeter-on-Top Continuum™ cone FST Anti-Resonance plug Biomimetic Suspension Turbine™ Head Matrix™ Aerofoil™ cone bass units Flowport Description 3-way vented-box system Drive units 1x ø25mm (1in) Diamond dome high-frequency 1x ø150mm (6in) Continuum cone FST midrange 2x ø200mm (8in) Aerofoil cone bass units Frequency range 14Hz to 35kHz Frequency response 17Hz to 28kHz (+/-3dB from reference axis) Sensitivity 90dB (on axis at 2.83Vrms at 1m) Harmonic distortion 2nd and 3rd harmonics (90dB,1m on axis) <1% 70Hz – 20kHz <0.3% 100Hz – 20kHz Nominal impedance 8Ω (minimum 3.0Ω) Recommended amplifier power 50W – 500W into 8Ω on unclipped programme Max recommended cable impedance 0.1Ω

Absolute elegance 802 D4’s svelte proportions and beautiful painted or real-wood-veneer finishes make for an elegant living-room companion – but one that doesn’t compromise on performance. Perfect for reference-grade stereo listening and an excellent choice in home theatre applications. Aerofoil™ bass cone Our Aerofoil bass cone technology remains an outstanding solution to the conundrum of combining low mass and high stiffness in bass cones, thanks to its carbon-fibre skin and variable-profile foam core. Now, we have added the foam Anti-Resonance Plug for lower distortion and even cleaner bass. Aluminium top-plate Every stereo model in the new 800 Series Diamond™ range has a significantly upgraded cabinet with an all-new aluminium top-plate. This also provides a perfect mounting point for all-new Leather by Connolly trim, with luxurious black leather for dark cabinets and light grey for lighter finishes. Decoupled midrange assembly Like its floor-standing siblings in the new range, 802 D4 has a dedicated midrange cone using three key Bowers & Wilkins technologies: the Continuum™ cone, Biomimetic Suspension and midrange decoupling, the latter ensuring minimal interference from the operation of the loudspeaker’s bass drivers. The science of sound Innovation is at the heart of everything we do. We question, we examine, we understand and then we evolve. We use computer modelling to explore and reimagine every aspect of loudspeaker design. Learn more about all the technologies that combine to make 800 Series Diamond so special here. The Bowers & Wilkins 802 D4 produces less inherent sound than virtually any other loudspeaker, and reproduces music as it was originally recorded, completely unclouded. avguide.ch One of our best 802 D4 is a very special loudspeaker in its own right, with a thrilling blend of performance and style that other loudspeakers will find hard to emulate. Only one model in our range can best it – the flagship 801 D4, which has 250mm (10-in) bass cones in a more substantial low-frequency enclosure. Size & weight Dimensions Height: 1218mm (48 in) Width: 413mm (16.3 in) Depth: 602mm (23.7 in) Net weight 88.10kg (194.2 lb) Technical details Technical features Diamond tweeter Solid body Tweeter-on-Top Continuum™ cone FST Anti-Resonance plug Biomimetic Suspension Turbine™ Head Matrix™ Aerofoil™ cone bass units Flowport Description 3-way vented-box system Drive units 1x ø25mm (1in) Diamond dome high-frequency 1x ø150mm (6in) Continuum cone FST midrange 2x ø200mm (8in) Aerofoil cone bass units Frequency range 14Hz to 35kHz Frequency response 17Hz to 28kHz (+/-3dB from reference axis) Sensitivity 90dB (on axis at 2.83Vrms at 1m) Harmonic distortion 2nd and 3rd harmonics (90dB,1m on axis) <1% 70Hz – 20kHz <0.3% 100Hz – 20kHz Nominal impedance 8Ω (minimum 3.0Ω) Recommended amplifier power 50W – 500W into 8Ω on unclipped programme Max recommended cable impedance 0.1Ω

Absolute elegance 802 D4’s svelte proportions and beautiful painted or real-wood-veneer finishes make for an elegant living-room companion – but one that doesn’t compromise on performance. Perfect for reference-grade stereo listening and an excellent choice in home theatre applications. Aerofoil™ bass cone Our Aerofoil bass cone technology remains an outstanding solution to the conundrum of combining low mass and high stiffness in bass cones, thanks to its carbon-fibre skin and variable-profile foam core. Now, we have added the foam Anti-Resonance Plug for lower distortion and even cleaner bass. Aluminium top-plate Every stereo model in the new 800 Series Diamond™ range has a significantly upgraded cabinet with an all-new aluminium top-plate. This also provides a perfect mounting point for all-new Leather by Connolly trim, with luxurious black leather for dark cabinets and light grey for lighter finishes. Decoupled midrange assembly Like its floor-standing siblings in the new range, 802 D4 has a dedicated midrange cone using three key Bowers & Wilkins technologies: the Continuum™ cone, Biomimetic Suspension and midrange decoupling, the latter ensuring minimal interference from the operation of the loudspeaker’s bass drivers. The science of sound Innovation is at the heart of everything we do. We question, we examine, we understand and then we evolve. We use computer modelling to explore and reimagine every aspect of loudspeaker design. Learn more about all the technologies that combine to make 800 Series Diamond so special here. The Bowers & Wilkins 802 D4 produces less inherent sound than virtually any other loudspeaker, and reproduces music as it was originally recorded, completely unclouded. avguide.ch One of our best 802 D4 is a very special loudspeaker in its own right, with a thrilling blend of performance and style that other loudspeakers will find hard to emulate. Only one model in our range can best it – the flagship 801 D4, which has 250mm (10-in) bass cones in a more substantial low-frequency enclosure. Size & weight Dimensions Height: 1218mm (48 in) Width: 413mm (16.3 in) Depth: 602mm (23.7 in) Net weight 88.10kg (194.2 lb) Technical details Technical features Diamond tweeter Solid body Tweeter-on-Top Continuum™ cone FST Anti-Resonance plug Biomimetic Suspension Turbine™ Head Matrix™ Aerofoil™ cone bass units Flowport Description 3-way vented-box system Drive units 1x ø25mm (1in) Diamond dome high-frequency 1x ø150mm (6in) Continuum cone FST midrange 2x ø200mm (8in) Aerofoil cone bass units Frequency range 14Hz to 35kHz Frequency response 17Hz to 28kHz (+/-3dB from reference axis) Sensitivity 90dB (on axis at 2.83Vrms at 1m) Harmonic distortion 2nd and 3rd harmonics (90dB,1m on axis) <1% 70Hz – 20kHz <0.3% 100Hz – 20kHz Nominal impedance 8Ω (minimum 3.0Ω) Recommended amplifier power 50W – 500W into 8Ω on unclipped programme Max recommended cable impedance 0.1Ω

Absolute elegance 802 D4’s svelte proportions and beautiful painted or real-wood-veneer finishes make for an elegant living-room companion – but one that doesn’t compromise on performance. Perfect for reference-grade stereo listening and an excellent choice in home theatre applications. Aerofoil™ bass cone Our Aerofoil bass cone technology remains an outstanding solution to the conundrum of combining low mass and high stiffness in bass cones, thanks to its carbon-fibre skin and variable-profile foam core. Now, we have added the foam Anti-Resonance Plug for lower distortion and even cleaner bass. Aluminium top-plate Every stereo model in the new 800 Series Diamond™ range has a significantly upgraded cabinet with an all-new aluminium top-plate. This also provides a perfect mounting point for all-new Leather by Connolly trim, with luxurious black leather for dark cabinets and light grey for lighter finishes. Decoupled midrange assembly Like its floor-standing siblings in the new range, 802 D4 has a dedicated midrange cone using three key Bowers & Wilkins technologies: the Continuum™ cone, Biomimetic Suspension and midrange decoupling, the latter ensuring minimal interference from the operation of the loudspeaker’s bass drivers. The science of sound Innovation is at the heart of everything we do. We question, we examine, we understand and then we evolve. We use computer modelling to explore and reimagine every aspect of loudspeaker design. Learn more about all the technologies that combine to make 800 Series Diamond so special here. The Bowers & Wilkins 802 D4 produces less inherent sound than virtually any other loudspeaker, and reproduces music as it was originally recorded, completely unclouded. avguide.ch One of our best 802 D4 is a very special loudspeaker in its own right, with a thrilling blend of performance and style that other loudspeakers will find hard to emulate. Only one model in our range can best it – the flagship 801 D4, which has 250mm (10-in) bass cones in a more substantial low-frequency enclosure. Size & weight Dimensions Height: 1218mm (48 in) Width: 413mm (16.3 in) Depth: 602mm (23.7 in) Net weight 88.10kg (194.2 lb) Technical details Technical features Diamond tweeter Solid body Tweeter-on-Top Continuum™ cone FST Anti-Resonance plug Biomimetic Suspension Turbine™ Head Matrix™ Aerofoil™ cone bass units Flowport Description 3-way vented-box system Drive units 1x ø25mm (1in) Diamond dome high-frequency 1x ø150mm (6in) Continuum cone FST midrange 2x ø200mm (8in) Aerofoil cone bass units Frequency range 14Hz to 35kHz Frequency response 17Hz to 28kHz (+/-3dB from reference axis) Sensitivity 90dB (on axis at 2.83Vrms at 1m) Harmonic distortion 2nd and 3rd harmonics (90dB,1m on axis) <1% 70Hz – 20kHz <0.3% 100Hz – 20kHz Nominal impedance 8Ω (minimum 3.0Ω) Recommended amplifier power 50W – 500W into 8Ω on unclipped programme Max recommended cable impedance 0.1Ω

Classic quality 804 D4 is perhaps more conventional in appearance than other floor-standers in the 800 Series Diamond range, but it’s every bit as sophisticated. Its new Reverse-Wrap cabinet is both a mechanical and acoustic revolution in its class, and its new plinth ensures rock-solid, accurate bass response too. Aluminium top-plate Every stereo model in the new 800 Series Diamond range has a significantly upgraded cabinet with an all-new aluminium top-plate. This also provides a perfect mounting point for all-new Leather by Connolly trim, with luxurious black leather for dark cabinets and light grey for lighter finishes. Reverse Wrap cabinet Instead of a conventional loudspeaker box, the cabinet in 804 D4 is made from a continuous curved section of wood, with the drive units mounted at the heart of the curvature. This stiffer, more inert structure resists mechanical resonances far better and also ensures better dispersion of sound. Aluminium plinth A great speaker needs a rock-solid foundation. The new 804 D4 uses a downwards-firing Flowport exiting on to a solid aluminium plinth complete with a steel constrained layer damping sheet, which controls unwanted resonance. It also has greatly upgraded spikes for maximum stability and durability. The science of sound Innovation is at the heart of everything we do. We question, we examine, we understand and then we evolve. We use computer modelling to explore and reimagine every aspect of loudspeaker design. Learn more about all the technologies that combine to make 800 Series Diamond so special here. The 804 D4 is a significant upgrade over its predecessor. Purity, resolution and prominently presenting the finest detail and a lifelike performance are its strengths. hifi.nl - 5 stars Get a Head 804 D4 is the entry-level floor-standing model in the 800 Series Diamond range. Step up to 803 D4 and you’ll find larger bass drivers (180mm, 7-in) plus, crucially, the addition of a Turbine™ Head enclosure for the 130mm (5-in) midrange cone, which adds even more spaciousness to the sound. · Size & weight Dimensions Height: 1071mm (42.2 in) Width: 306mm (12 in) Depth: 391mm (15.4 in) Net weight 36.85kg (81.2 lb) · Technical details Technical features Diamond tweeter Solid body Tweeter-on-Top Continuum™ cone FST Anti-Resonance plug Biomimetic Suspension Matrix™ Aerofoil™ cone bass units Flowport Description 3-way vented-box system Drive units 1x ø25mm (1in) Diamond dome high-frequency 1x ø130mm (5in) Continuum cone FST midrange 2x ø165mm (6.5in) Aerofoil cone bass units Frequency range 20Hz to 35kHz Frequency response 24Hz to 28kHz (+/-3dB from reference axis) Sensitivity 89dB (on axis at 2.83Vrms at 1m) Harmonic distortion 2nd and 3rd harmonics (90dB,1m on axis) <1% 90Hz – 20kHz <0.3% 120Hz – 20kHz Nominal impedance 8Ω (minimum 3.0Ω) Recommended amplifier power 50W – 200W into 8Ω on unclipped programme Max recommended cable impedance 0.1Ω

Classic quality 804 D4 is perhaps more conventional in appearance than other floor-standers in the 800 Series Diamond range, but it’s every bit as sophisticated. Its new Reverse-Wrap cabinet is both a mechanical and acoustic revolution in its class, and its new plinth ensures rock-solid, accurate bass response too. Aluminium top-plate Every stereo model in the new 800 Series Diamond range has a significantly upgraded cabinet with an all-new aluminium top-plate. This also provides a perfect mounting point for all-new Leather by Connolly trim, with luxurious black leather for dark cabinets and light grey for lighter finishes. Reverse Wrap cabinet Instead of a conventional loudspeaker box, the cabinet in 804 D4 is made from a continuous curved section of wood, with the drive units mounted at the heart of the curvature. This stiffer, more inert structure resists mechanical resonances far better and also ensures better dispersion of sound. Aluminium plinth A great speaker needs a rock-solid foundation. The new 804 D4 uses a downwards-firing Flowport exiting on to a solid aluminium plinth complete with a steel constrained layer damping sheet, which controls unwanted resonance. It also has greatly upgraded spikes for maximum stability and durability. The science of sound Innovation is at the heart of everything we do. We question, we examine, we understand and then we evolve. We use computer modelling to explore and reimagine every aspect of loudspeaker design. Learn more about all the technologies that combine to make 800 Series Diamond so special here. The 804 D4 is a significant upgrade over its predecessor. Purity, resolution and prominently presenting the finest detail and a lifelike performance are its strengths. hifi.nl - 5 stars Get a Head 804 D4 is the entry-level floor-standing model in the 800 Series Diamond range. Step up to 803 D4 and you’ll find larger bass drivers (180mm, 7-in) plus, crucially, the addition of a Turbine™ Head enclosure for the 130mm (5-in) midrange cone, which adds even more spaciousness to the sound. · Size & weight Dimensions Height: 1071mm (42.2 in) Width: 306mm (12 in) Depth: 391mm (15.4 in) Net weight 36.85kg (81.2 lb) · Technical details Technical features Diamond tweeter Solid body Tweeter-on-Top Continuum™ cone FST Anti-Resonance plug Biomimetic Suspension Matrix™ Aerofoil™ cone bass units Flowport Description 3-way vented-box system Drive units 1x ø25mm (1in) Diamond dome high-frequency 1x ø130mm (5in) Continuum cone FST midrange 2x ø165mm (6.5in) Aerofoil cone bass units Frequency range 20Hz to 35kHz Frequency response 24Hz to 28kHz (+/-3dB from reference axis) Sensitivity 89dB (on axis at 2.83Vrms at 1m) Harmonic distortion 2nd and 3rd harmonics (90dB,1m on axis) <1% 90Hz – 20kHz <0.3% 120Hz – 20kHz Nominal impedance 8Ω (minimum 3.0Ω) Recommended amplifier power 50W – 200W into 8Ω on unclipped programme Max recommended cable impedance 0.1Ω

Classic quality 804 D4 is perhaps more conventional in appearance than other floor-standers in the 800 Series Diamond range, but it’s every bit as sophisticated. Its new Reverse-Wrap cabinet is both a mechanical and acoustic revolution in its class, and its new plinth ensures rock-solid, accurate bass response too. Aluminium top-plate Every stereo model in the new 800 Series Diamond range has a significantly upgraded cabinet with an all-new aluminium top-plate. This also provides a perfect mounting point for all-new Leather by Connolly trim, with luxurious black leather for dark cabinets and light grey for lighter finishes. Reverse Wrap cabinet Instead of a conventional loudspeaker box, the cabinet in 804 D4 is made from a continuous curved section of wood, with the drive units mounted at the heart of the curvature. This stiffer, more inert structure resists mechanical resonances far better and also ensures better dispersion of sound. Aluminium plinth A great speaker needs a rock-solid foundation. The new 804 D4 uses a downwards-firing Flowport exiting on to a solid aluminium plinth complete with a steel constrained layer damping sheet, which controls unwanted resonance. It also has greatly upgraded spikes for maximum stability and durability. The science of sound Innovation is at the heart of everything we do. We question, we examine, we understand and then we evolve. We use computer modelling to explore and reimagine every aspect of loudspeaker design. Learn more about all the technologies that combine to make 800 Series Diamond so special here. The 804 D4 is a significant upgrade over its predecessor. Purity, resolution and prominently presenting the finest detail and a lifelike performance are its strengths. hifi.nl - 5 stars Get a Head 804 D4 is the entry-level floor-standing model in the 800 Series Diamond range. Step up to 803 D4 and you’ll find larger bass drivers (180mm, 7-in) plus, crucially, the addition of a Turbine™ Head enclosure for the 130mm (5-in) midrange cone, which adds even more spaciousness to the sound. · Size & weight Dimensions Height: 1071mm (42.2 in) Width: 306mm (12 in) Depth: 391mm (15.4 in) Net weight 36.85kg (81.2 lb) · Technical details Technical features Diamond tweeter Solid body Tweeter-on-Top Continuum™ cone FST Anti-Resonance plug Biomimetic Suspension Matrix™ Aerofoil™ cone bass units Flowport Description 3-way vented-box system Drive units 1x ø25mm (1in) Diamond dome high-frequency 1x ø130mm (5in) Continuum cone FST midrange 2x ø165mm (6.5in) Aerofoil cone bass units Frequency range 20Hz to 35kHz Frequency response 24Hz to 28kHz (+/-3dB from reference axis) Sensitivity 89dB (on axis at 2.83Vrms at 1m) Harmonic distortion 2nd and 3rd harmonics (90dB,1m on axis) <1% 90Hz – 20kHz <0.3% 120Hz – 20kHz Nominal impedance 8Ω (minimum 3.0Ω) Recommended amplifier power 50W – 200W into 8Ω on unclipped programme Max recommended cable impedance 0.1Ω

Classic quality 804 D4 is perhaps more conventional in appearance than other floor-standers in the 800 Series Diamond range, but it’s every bit as sophisticated. Its new Reverse-Wrap cabinet is both a mechanical and acoustic revolution in its class, and its new plinth ensures rock-solid, accurate bass response too. Aluminium top-plate Every stereo model in the new 800 Series Diamond range has a significantly upgraded cabinet with an all-new aluminium top-plate. This also provides a perfect mounting point for all-new Leather by Connolly trim, with luxurious black leather for dark cabinets and light grey for lighter finishes. Reverse Wrap cabinet Instead of a conventional loudspeaker box, the cabinet in 804 D4 is made from a continuous curved section of wood, with the drive units mounted at the heart of the curvature. This stiffer, more inert structure resists mechanical resonances far better and also ensures better dispersion of sound. Aluminium plinth A great speaker needs a rock-solid foundation. The new 804 D4 uses a downwards-firing Flowport exiting on to a solid aluminium plinth complete with a steel constrained layer damping sheet, which controls unwanted resonance. It also has greatly upgraded spikes for maximum stability and durability. The science of sound Innovation is at the heart of everything we do. We question, we examine, we understand and then we evolve. We use computer modelling to explore and reimagine every aspect of loudspeaker design. Learn more about all the technologies that combine to make 800 Series Diamond so special here. The 804 D4 is a significant upgrade over its predecessor. Purity, resolution and prominently presenting the finest detail and a lifelike performance are its strengths. hifi.nl - 5 stars Get a Head 804 D4 is the entry-level floor-standing model in the 800 Series Diamond range. Step up to 803 D4 and you’ll find larger bass drivers (180mm, 7-in) plus, crucially, the addition of a Turbine™ Head enclosure for the 130mm (5-in) midrange cone, which adds even more spaciousness to the sound. · Size & weight Dimensions Height: 1071mm (42.2 in) Width: 306mm (12 in) Depth: 391mm (15.4 in) Net weight 36.85kg (81.2 lb) · Technical details Technical features Diamond tweeter Solid body Tweeter-on-Top Continuum™ cone FST Anti-Resonance plug Biomimetic Suspension Matrix™ Aerofoil™ cone bass units Flowport Description 3-way vented-box system Drive units 1x ø25mm (1in) Diamond dome high-frequency 1x ø130mm (5in) Continuum cone FST midrange 2x ø165mm (6.5in) Aerofoil cone bass units Frequency range 20Hz to 35kHz Frequency response 24Hz to 28kHz (+/-3dB from reference axis) Sensitivity 89dB (on axis at 2.83Vrms at 1m) Harmonic distortion 2nd and 3rd harmonics (90dB,1m on axis) <1% 90Hz – 20kHz <0.3% 120Hz – 20kHz Nominal impedance 8Ω (minimum 3.0Ω) Recommended amplifier power 50W – 200W into 8Ω on unclipped programme Max recommended cable impedance 0.1Ω

High-End Features 12'' Tonearm Single-pivot design This high-end tonearm features a non-magnetic low resonance construction with minimised bearing friction. Flywheel Vibration-free belt drive Its flywheel belt drive system ensures a vibration-free running which results in the most accurate and stable speeds. 10 kg Platter Mass loaded aluminium The 10 kg aluminium platter is TPE damped and sits on an inverted bearing which is magnetically decoupled. The vinyl layer on top is the perfect surface for your record. 33/45 RPM Speed change on touch display Easily change or fine-adjust the speed step-by-step on the built-in touch display. The precision generator ensures the perfect playback speed with the utmost precision. Single-Pivot 12'' Tonearm The new tonearm is a genuine Pro-Ject design and allows stepless, "on-the-fly" VTA and mounting distance settings. With its wide range of adjustment possibilities and the number of included counterweights, 100% of performance can be extracted out of any cartridge. Steel pellets inside the MDF chassis increase the mass of the Signature 12. As it is not from solid alloy a ringing effect will be avoided. The magnetic-floating platter runs ultra-silently on an inverted ceramic ball bearing and guarantees an absolutely quiet-running turntable. Step by Step. Unpacking Wooden Box with everything you need Your Signature 12 comes safe and secure in a big wooden box with everything you need to set it up correctly. Setup Perfect setup for the best sound With the included Measure it S2, Align it DS2, Level it and many more accessories the setup is made easy. Connection Connect it 5P-CC RCA To guarantee a perfect connection to your amp you will find a high-quality carbon-copper tonearm cable in the box. Enjoy! The most important step Put on a record, place the clamp on it, start the motor, lean back & enjoy! Speed 33, 45 (electronic speed change) Actuation principle Flywheel belt drive Motor control system Precision generator with LC display Platter 10.55 kg magnetically decoupled Main bearing Ceramic (ball/plate) Tonearm 12” single-pivot aluminium Effective arm length 304.8 mm Effective arm mass 19.5 g Cartridge mass 4-10g, several counterweights included RCA connectors Gold-plated Power supply 15V/1,5A included Dimensions 570 x 440 x 234 mm (WxHxD) Weight 34.6 kg net

High-End Features 12'' Tonearm Single-pivot design This high-end tonearm features a non-magnetic low resonance construction with minimised bearing friction. Flywheel Vibration-free belt drive Its flywheel belt drive system ensures a vibration-free running which results in the most accurate and stable speeds. 10 kg Platter Mass loaded aluminium The 10 kg aluminium platter is TPE damped and sits on an inverted bearing which is magnetically decoupled. The vinyl layer on top is the perfect surface for your record. 33/45 RPM Speed change on touch display Easily change or fine-adjust the speed step-by-step on the built-in touch display. The precision generator ensures the perfect playback speed with the utmost precision. Single-Pivot 12'' Tonearm The new tonearm is a genuine Pro-Ject design and allows stepless, "on-the-fly" VTA and mounting distance settings. With its wide range of adjustment possibilities and the number of included counterweights, 100% of performance can be extracted out of any cartridge. Steel pellets inside the MDF chassis increase the mass of the Signature 12. As it is not from solid alloy a ringing effect will be avoided. The magnetic-floating platter runs ultra-silently on an inverted ceramic ball bearing and guarantees an absolutely quiet-running turntable. Step by Step. Unpacking Wooden Box with everything you need Your Signature 12 comes safe and secure in a big wooden box with everything you need to set it up correctly. Setup Perfect setup for the best sound With the included Measure it S2, Align it DS2, Level it and many more accessories the setup is made easy. Connection Connect it 5P-CC RCA To guarantee a perfect connection to your amp you will find a high-quality carbon-copper tonearm cable in the box. Enjoy! The most important step Put on a record, place the clamp on it, start the motor, lean back & enjoy! Speed 33, 45 (electronic speed change) Actuation principle Flywheel belt drive Motor control system Precision generator with LC display Platter 10.55 kg magnetically decoupled Main bearing Ceramic (ball/plate) Tonearm 12” single-pivot aluminium Effective arm length 304.8 mm Effective arm mass 19.5 g Cartridge mass 4-10g, several counterweights included RCA connectors Gold-plated Power supply 15V/1,5A included Dimensions 570 x 440 x 234 mm (WxHxD) Weight 34.6 kg net

High-End Features 12'' Tonearm Single-pivot design This high-end tonearm features a non-magnetic low resonance construction with minimised bearing friction. Flywheel Vibration-free belt drive Its flywheel belt drive system ensures a vibration-free running which results in the most accurate and stable speeds. 10 kg Platter Mass loaded aluminium The 10 kg aluminium platter is TPE damped and sits on an inverted bearing which is magnetically decoupled. The vinyl layer on top is the perfect surface for your record. 33/45 RPM Speed change on touch display Easily change or fine-adjust the speed step-by-step on the built-in touch display. The precision generator ensures the perfect playback speed with the utmost precision. Single-Pivot 12'' Tonearm The new tonearm is a genuine Pro-Ject design and allows stepless, "on-the-fly" VTA and mounting distance settings. With its wide range of adjustment possibilities and the number of included counterweights, 100% of performance can be extracted out of any cartridge. Steel pellets inside the MDF chassis increase the mass of the Signature 12. As it is not from solid alloy a ringing effect will be avoided. The magnetic-floating platter runs ultra-silently on an inverted ceramic ball bearing and guarantees an absolutely quiet-running turntable. Step by Step. Unpacking Wooden Box with everything you need Your Signature 12 comes safe and secure in a big wooden box with everything you need to set it up correctly. Setup Perfect setup for the best sound With the included Measure it S2, Align it DS2, Level it and many more accessories the setup is made easy. Connection Connect it 5P-CC RCA To guarantee a perfect connection to your amp you will find a high-quality carbon-copper tonearm cable in the box. Enjoy! The most important step Put on a record, place the clamp on it, start the motor, lean back & enjoy! Speed 33, 45 (electronic speed change) Actuation principle Flywheel belt drive Motor control system Precision generator with LC display Platter 10.55 kg magnetically decoupled Main bearing Ceramic (ball/plate) Tonearm 12” single-pivot aluminium Effective arm length 304.8 mm Effective arm mass 19.5 g Cartridge mass 4-10g, several counterweights included RCA connectors Gold-plated Power supply 15V/1,5A included Dimensions 570 x 440 x 234 mm (WxHxD) Weight 34.6 kg net

High-End Features 12'' Tonearm Single-pivot design This high-end tonearm features a non-magnetic low resonance construction with minimised bearing friction. Flywheel Vibration-free belt drive Its flywheel belt drive system ensures a vibration-free running which results in the most accurate and stable speeds. 10 kg Platter Mass loaded aluminium The 10 kg aluminium platter is TPE damped and sits on an inverted bearing which is magnetically decoupled. The vinyl layer on top is the perfect surface for your record. 33/45 RPM Speed change on touch display Easily change or fine-adjust the speed step-by-step on the built-in touch display. The precision generator ensures the perfect playback speed with the utmost precision. Single-Pivot 12'' Tonearm The new tonearm is a genuine Pro-Ject design and allows stepless, "on-the-fly" VTA and mounting distance settings. With its wide range of adjustment possibilities and the number of included counterweights, 100% of performance can be extracted out of any cartridge. Steel pellets inside the MDF chassis increase the mass of the Signature 12. As it is not from solid alloy a ringing effect will be avoided. The magnetic-floating platter runs ultra-silently on an inverted ceramic ball bearing and guarantees an absolutely quiet-running turntable. Step by Step. Unpacking Wooden Box with everything you need Your Signature 12 comes safe and secure in a big wooden box with everything you need to set it up correctly. Setup Perfect setup for the best sound With the included Measure it S2, Align it DS2, Level it and many more accessories the setup is made easy. Connection Connect it 5P-CC RCA To guarantee a perfect connection to your amp you will find a high-quality carbon-copper tonearm cable in the box. Enjoy! The most important step Put on a record, place the clamp on it, start the motor, lean back & enjoy! Speed 33, 45 (electronic speed change) Actuation principle Flywheel belt drive Motor control system Precision generator with LC display Platter 10.55 kg magnetically decoupled Main bearing Ceramic (ball/plate) Tonearm 12” single-pivot aluminium Effective arm length 304.8 mm Effective arm mass 19.5 g Cartridge mass 4-10g, several counterweights included RCA connectors Gold-plated Power supply 15V/1,5A included Dimensions 570 x 440 x 234 mm (WxHxD) Weight 34.6 kg net

Key Features Hear All Your Music - From SACDs to DSD files, enjoy all of your music without limits. Pure Marantz Sound - HDAM technology combined with optimized circuit design layout and carefully selected components, provides exceptional sound quality and performance. Sound Master Tuned - Engineered and extensively tuned by a team drawing on more than 35 years of Marantz CD and SACD design knowledge. Upscale Listening - Innovative Marantz Musical Mastering “MMM-Stream” up-sampling to DSD and filtering Developed For Generations Like its partnering, the PM-10 integrated amplifier, the SA-10 is constructed to the highest possible standards, with a double-layered copper-plated chassis for excellent rejection of mechanical and electrical interference, and casework constructed from thick non-magnetic aluminum panels and 5mm thick top lid. Both products also sit on aluminum machining feet for reduced vibration and allows for a smoother listening experience. This Is More Than Just A DAC The SA-10 takes things further - just as it features an all-new disc transport mechanism, so the digital to analogue conversion has also been subject to a radical rethink, taking full advantage of the 1-bit conversion technology found in past flagship Marantz players, and incorporating brand-new filtering and up-conversion to take advantage of this simple, but elegant solution. We name it Marantz Musical Mastering. Marantz Musical Mastering DSD is at the heart of the way the SA-10 handles digital audio: PCM and DXD inputs are all upconverted to DSD at 11.2MHz using the proprietary MMM-Stream converter within the player, and then the high-frequency signal produced is processed by the unique MMM-Conversion stage, used in place of a conventional DAC, to produce the analogue output. It Starts With The Disc Whether playing SACDs, CDs, or other data discs containing music, it's vital that any player retrieves the information as accurately as possible: unlike a computer reading a disc for ripping, there's no time for repeated re-scans when playing music - it happens in real time, so the disc transport needs to get things right first time. CDs, SACDs And Beyond The SA-10 goes so much further than just disc playback: it's also a fully-functional digital-to-analog converter for music stored on a home computer, as well as having conventional digital inputs for existing source components. Those conventional inputs - optical and coaxial - can handle your music files up to 192kHz/24bit. CD Compatibility: CD / CD-R/RW / SA-CD / WMA / MP3 / AAC Yes / Yes / Yes / Yes / Yes / Yes CD-Text / SA-CD Text / ID3 Tag / WMA Meta Tag / AAC Meta data No / Yes / Yes / Yes / Yes Data Disc Compatibility: DSD / WAV / ALAC <=5.6 / 192 / 96 iPod / iPhone Compatible USB Input Yes DAC Operation Mode: USB / Coax / Optical Yes / Yes / Yes Asynchronous Mode Rear USB Yes Bit-Perfect Transmission Yes Signal Isolator For DAC Mode Operation Yes HDAM Version HDAM+HDAM SA2 Power Transformer: Toroidal / El Yes / No High Grade Audio Components Yes Customised Components Yes Symmetric Circuit Layout Yes Copper Plated Chassis Yes Extra Metal Plate For Chassis Strengthening Yes Digital Out Off / Audio EX Mode Yes / No Headphone: Standard / Buffer / Current Feedback No / Yes (HDAM SA2+HDAM) / Yes Others Separated Rectifier Circuit For Analog And Digital Circuitry Yes Display: Dimmer / Off No / Yes Low Noise LCD Display Yes 5mm Aluminium Top Cover Yes Selectable Filter: CD / SA-CD / DAC-Mode Yes / No / Yes Marantz Musical Mastering Yes (HD) Marantz Musical Mastering Stream Yes Marantz Musical Mastering Conversion Yes Playback Program Play (CD / SA-CD) Yes / Yes Repeat Yes Random Play Yes Start Sound Mode For SA-CD Yes Inputs/Outputs Analogue Out (Cinch) Content Heading 2ch Balanced Out Yes Digital Optical In / Out Yes / Yes Digital Coaxial In / Out Yes / Yes Sample Rate Digital In 192 kHz / 24-bit Gold Plated Cinch silver / nickel USB Audio (Front) / Made for iPod / Made for iPhone rear / Yes / Yes USB Type B Input For PC (Rear) Sample Rate USB Type B In Yes Asynchronous Mode Rear USB Yes USB Type B input For PC (rear) 384 kHz / 32-bit USB-B DSD Audio Streaming (DoP): DSD2.8 / DSD5.6 -> DSD11.2 Headphone Out Yes Headphone Volume Control Yes Mechanism SACD-M3 (METAL) D/A Conversion Marantz Musical Mastering Conversion DAC IC Marantz Musical Mastering Conversion Digital Filter DSP (Marantz) Low Pass Filter Stage HDAM x 2 Output Buffer HDAM SA2 Frequency Response (Cust.) 2 Hz - 60 kHz Dynamic Range (SA) 109dB Signal To Noise Ratio (SA) 112dB Channel Separation (SA) 105 dB Frequency Response 2 Hz - 20 kHz Dynamic Range 98 dB Signal To Noise Ratio 104 dB Total Harmonic Distortion 0.00% Channel Separation 100 dB Total Harmonic Distortion (SA) 0.00% General Available Colours: Gold / Silver / Black / Silver-Gold Yes / No / Yes / No Metal Front Panel Yes Remote Control RC004PMSA Power Consumption in W 50 Standby Consumption in W 0.3 Auto Power Off Yes Detachable Power Cable Yes Maximum Dimensions (W x D x H) In mm 440 x 419 x 127 Weight In kg 18.4