Marka: Özgül Model: SIDE TIPPING SEMI TRAILER Tip: poluprikolica kipera Lokacija: Turska Konya Datum objavljivanja: više od 1 meseca Autoline ID: MM20227 Total length: 12,600-13.600 mm Height of side cover: 800 mm Number of side covers: 5 x 2 pieces Floor steel sheet: 4 mm Side cover steel sheet: 2 mm Cover bollard: 4 mm Side skirts: 3 mm Frame tilting direction: Bodywork has property of being tilted to both directions Hydraulic cylinder: 3 Nos 6 Stage hydraulic cylinder is used Oil tank: 160 lt oil tank is mounted at right hand side of undercarriage AXLE: 3 Nos 12 ton capacity axle with drum are used High strength undercarriage arms have “I” cross section There is Single axle lifting system front axle which is controlled from cabinet 385/65 R 22,5 12+1 No tyre and rim 2s/2m EBS E + RSS brake sys¬tem accordingly with EU standards Electrical hardware is accordingly with SAE standards and road traffic legislation Electricity is taken from ve¬hicle by 7 pin plug two lamps are used at both sides. There two orange reflectors at both side There are rear parki stop signal lamps and rear trailer reflector at rear side It is painted in Heated Special Paint cabinet by sandb¬lasting+1 layer epoxy lining+ 2 layers acrylic lining Color is determined according to customer request Lifting jack feet operates parallel has two speed hinged wide shoed telescobic and has 50 ton static and dynamic 25 ton capacity 2 pieces steel sheet tool box wheel hub cover wrench Aluminum bicycle crash location Plastic wedge

Marka: Serin Model: 2023 Tip: poluprikolica za prevoz kontejnera Godina proizvodnje: 05/2022 Lokacija: Turska Selçuklu / KONYA Datum objavljivanja: više od 1 meseca Autoline ID: WL12425 Length —12500 mm Width —2480 mm Chassis —ST 52 material “I” profile how is produced by welding with gas, King Pin —2” king – pin detachable from below made by SAE standards 8 bolt type. Axles —3 x 12000 kg carrying capacity SERİN brand Loading Capacity — 40 ton Distance Between the Axles —1320 mm Brake And Air Suspension System —Air Suspension —Drum Brake System —ABS WABCO Brake System Base Floor & Container Lock —Skeleton —12 Piece Container Locked —1 PCS 40, —2 PCS 20 Container, Landing Gear —Double Speed, —24000 kg carrying capacity, —Mechanical Landing Gears, Rear Bumper —Suitable 70/221 / AT-version of the rear bumper, Chocks and Protective Barriers —Carriers with 1 unit wheel chock Mud Guards —2 PCS galvanized steel mudguards with plastic edges. Tires and Rims —6+1 PCS 385 / 65 R 22,5 Bridgestone Spare Wheel Carrier —1 piece tire carrier Boxes —1 unit Tool Box, —1 units of 6 kg of fire tube and plastic carriers Water Tank —60 lit water tank which is made of stainless steel. Paint —Material cleaned and grit (metal) material is blasting, —2 Floor Epoxy primers are made and the desired color, —In the final layer is painted with 2 coats acrylic paint, Electric Installation and Lightning System —There are amber-colored lights in the side by 3 units, —Park at the rear lamps, —License plate lamp, —Reflector triangles, —Electrical system; Flame proof electrical system 2 X 7-pin electrical socket. Accessories —Hub key, —Axles Bolt Nut key, —Tool box keys,

Marka: Sinan Tanker-Treyler Model: Container carrier semitrailer Tip: poluprikolica za prevoz kontejnera Lokacija: Turska KONYA Datum objavljivanja: 10. 5. 2024. Autoline ID: XT36589 Technical Parameters of the Tanks Semitrailer type Universal container ship 2023 container type 1x20/ 2x20 / 1x40 / 1x30 SSU height 1150 mm. for tractor 4x2 frame material high alloy steel (ST52-3,Qste 380Tm) Color On request axes Pneumatic Osman Koc / Ceylan 4 x 9, first and last axle lifting Suspension Pneumatic Brake system Drum type with Wabco ABS/EBS Electronic Braking System, ECE Compliant support device OMS or equivalent, 25 tons each Tires Pirelli/Lasso/Goodyer or equivalent size 385/55 R22.5 8 pcs+1 Disks Janta-Jantas Size 11.75 x 22.5 8 pcs. +1 kingpin 2 inches electrical system 24V made in accordance with European standards (class 3 ADR) Options At the rear of the semi-trailer there is an unloading platform for unloading/loading goods into a 20Ft container. Accessories 12 pcs. fittings for fastening 1 PC. Water barrel with tap for water supply 1 PC. Toolbox Red fire compartment (without cylinders) 1 PC. Spare wheel 2 pcs. wheel chock Konteynerler 1х20/ 2х20 / 1х40 /1х30 King pin yüksekliği 1150 мм. Çekeci 4x2 Çelik ST52-3,Qste 380Tm Renk Dingil Osman Koc /Ceylan 4 х 9, первая и последняя ось подъемная Ön ve son dingil kalkma Suspansion Hava Fren Wabco EBS Park ayak OMS Lastik Pirelli/Lasso/Goodyer veya muadili 385/55 R22.5 8 tane .+1 ek Jantlar 11.75 x 22.5 8 +1 King pin 2 inch Elektrik 24 V standart Arka platform Dorse arkasında 20 feet konteyner boşaltmak için platform olacak Aksesuar 12 tane kilit 1 su tankı 1 alet dolap plastik 1 yangın dolap 2 takoz

Marka: Nükte Trailer Tip: poluprikolica kipera Lokacija: Turska Konya Datum objavljivanja: 22. 5. 2024. Autoline ID: MD36396 Şasi ve kasa üretiminde yüksek mukavemetli ithal saclar kullanılmaktadır. Araç yüklü veya boş iken kapak ve ilaveler problemsiz olarak açılıp kapanabilir. Yüksek kalitede, standar üretim bandında imal edilmektedir. Dingil teknolojisi yakıt tasarufu ve uzun lastik ömrü sağlamaktadır. Şasi: Şasi ana sacı (ayna sacı – lonjeron), alt ve üst lamaları ve tüm kroslar yüksek mukavemetli ithal S700MC cinsi sac kullanılarak imal edilir. Şasi I kesitli formda robot kaynaklı olarak üretilir Kasa: 33-46 m3 arasındaki hacimlerde ve yüksek mukavemetli, aşınmaya ve darbelere dayanıklı ithal saclar kullanılarak üretilir Hidrolik Sistem: 5 kademeli ağır tip teleskobik silindir, 82 litre çift dönüşlü pompa, çift hız kademeli ventil, sınır kontrol ventili, 120 lt yağ tankı, hidrolik tesisat hortum ve rakorları, hava kontrollü kabin içerisinde düğme ve hava tesisatı Aydınlatma Sistemi: 2x7+1x15 pin soketli, 24 V aydınlatma Fren Sistemi: 2S-2M EBS sistemi (RSS özellikli) WABCO ya da KNORR-BREMSE Yürür Aksam: 3x9 ton kapasiteli kampanalı, 70 tek kat makaslı, hava süspansiyonlu yerli dingil seti. Fesan seçimi markada, 6+1 adet 385x65xR22,5 ölçülerine lastik ve bu lastiklere uygun jant Boya: Girit metal kumlama, epoksi astar, akrilik boya (Fırınlı boya kabininde) Standart Aksesuarlar: 2 hızlı mekanik park ayakları, 1 adet borulu stepne yeri, 1 adet takoz yeri ve takozu, 1 adet sac dolap, 1 adet plastik takım sandığı, 1 adet yangın söndürücü dolabı, 1 adet su tankı, 6 adet plastik tam çamurluk, 1 adet tonaj saati, alüminyum merdiven Standart Özellikler: Sökülebilir cıvata bağlantılı king pin, güçlendirilmiş kepçe dayama yeri, manuel 1. dingil kaldırma, otomatik körük boşaltma, ön panelde çift merdiven, katlanır arka tampon Opsiyonlar: Damper kasası açık iken otomatik frenleme ile araç yürüyüşünü engelleme, Avrupa diskli ve kampanalı dingiller, PTO montajı, alüminyum jant, branda sistemi

Marka: Serin Model: 2023 Tip: poluprikolica kipera Zapremina: 38 m³ Lokacija: Turska Datum objavljivanja: 7. 5. 2024. Autoline ID: MT35445 Standard Features SEMI TRAILER SUITABLE: 6x4 truck DIMENSIONS OF BODY: Overall length: 8997 mm, Overall width: 2190 mm, Payload: 35 Ton, Volume: 35 m3 FIFTH WHEEL HEIGHT: 1350 -1400 mm. CHASSIS: The Trailer has to lay on a special steel profile which connects the saddles. On the special profile proper reinforcements have to be located for connection points of the running gears, Material is ST52 steel plate according to the dimensions of International Standards FRONT WALL, SIDE COVERS AND REAR COVER: Primer box dimension 8997x2190x1840 mm KING PIN: 2” king – pin detachable from below made by SAE standards 8 bolt type. AXLES: 3 x 12000 kg carrying capacity STANDART TYPE AIR SUSPENSION AXLE. (SERİN brand) DISTANCE BETWEEN AXLES: 1320 mm BRAKE AND SUSPENSION SYSTEM: Air Suspension, Drum Brake System, WABCO Brake System, ABS Brake System LANDING GEARS: Double Speed, 24000 kg carrying capacity, QRC brand mechanical Landing Gears REAR BUMPER: Suitable 70/221 / AT-version of the rear bumper, WHEEL CHOCK: Carriers with 2 unit wheel chock TIRES & WHEELS: 6 +1 PCS 385 / 65 R 22,5 (or optional double tyres 315 80 R 22,5 MUDGUARD: 2 PCS galvanized steel mudguards with plastic edges. SPARE TIRE CARRIER: 1 piece tire carrier BOX: 1 unit plastic Tool Box, 1 unit fire distinguisher plastic carriers’ box. WATER TANK: 60 lt water tank which is made of stainless steel. PAINT: Material cleaned and grit (metal) material is blasting, 2 coats epoxy primers are made and desired colour, In the final layer is painted with 2 coats acrylic paint ELECTRICAL EQUIPMENT AND LIGHTING: 3 units amber-colored lights placed on the both side, Park lamps at the rear side of the vehicle, License plate lamp, Reflector triangles, Flame proof electrical system, 2 X 7-pin electrical socket. ACCESSORIES: Hub key, Axles Bolt Nut key, Tool box keys, HYDRAULIC SYSTEM: 5 stage Cold Shooting Steel Profile

Marka: Serin Model: 2023 Tip: poluprikolica za prevoz kontejnera Godina proizvodnje: 2023 Neto težina: 5550 kg Lokacija: Turska KONYA Datum objavljivanja: više od 1 meseca Autoline ID: UW34998 Tractor Type : 4x2 , tractor suitable for 1150 mm King Pin Height. Chassis : High Graded Material “I” profile it is produced with gas welding, it has high-quality strength, Standard chassis type Platform: Skeleton chassis for transport dangerous materials. Container twist lock:12 PCS. 1 x 20 feet, 2 x 20 feet, 1 x 30 feet, feet 1 x 40 feet and 1x 45 feet King Pin: 2" king pin—Pin detachable from below made by SAE standards 8 bolt type. Axles: 3 x 9000 kg carrying capacity SAF or SERİN brand Disc Brake Type, 1st axle lifting Distance Between Axles:1320 mm Brakes & Suspension: Air Suspension ,EBS Brake System KNORR or Wabco brand, Automatic Slack Adjuster Landing gear: Double Speed, 24000 kg carrying capacity SAF brand, Mechanical Landing Gears Rear Bumper: Suitable 70/221 / AT-version of the rear bumper Tire Chock: Carriers with 1 unit wheel chock Tires: 6 PCS 385/ 65 R 22,5 Single tire type , Bridgestone or equivalent,120 offset 22,5 x 11,75 Rim, 280,8 x 335 x 10 wheel stud M 22 x 1,5 Mud Cover: 6 Units full plastic mudguards fited with galvanized steel holders. Spear Wheel Carrier:1 piece tire carrier Reducer type Tool Box:1 pcs Plastic Tool Box 80 cm , 1 pcs Plastic Fire Extinguisher Box Water Tank: 30 liters’ plastic Water Tank Paint:Steel Material surface is cleaned by grit metal and send, which is shot blasted on the surfaces of the metal. 2 Floor Epoxy primers are made and final paint with requested RAL color Electrical System and Lightening System: —3 unit’s amber-colored lights placed on the both sides —Park lamps at the rear side of the vehicle (with a protective grill) —License plate lamps, —Reflector triangles, —Flameproof electrical system —2 X 7-pin and 1 x 15-pin electrical socket.

Marka: Reis Treyler Model: 32m3 Tip: poluprikolica kipera Godina proizvodnje: 04/2023 Prvo registrovanje: 2023-04-07 Zapremina: 323 m³ Kapacitet podizanja: 48500 kg Neto težina: 11500 kg Ukupna težina: 60000 kg Lokacija: Turska Selçuklu / KONYA Datum objavljivanja: 20. 5. 2024. Kataloški broj prodavca: KD300 TECHINCAL SPECIFICATIONS OF TIPPER SEMI -TRAILER Chassis —ST 52 Material “I” profile it is produced with gas welding, it has high quality strength 4mm, Length of the Chassis 8,3m for 6x4 Truck Tare weight approximate 9,6 ton King Pin —2” king – pin detachable from below made by SAE standards 8 bolt type. Axle —3 x 14.000 kg carrying capacity SERİN brand Distance Between Axles —1380 mm Brakes & Suspension —Mechanical Suspension —Drum Brake Landing gear —Double Speed, —24000 kg carrying capacity, —JOST brand mechanical Landing Gears, Rear Bumper —Suitable 70/221 / AT-version of the rear bumper, Tire Chock —Carriers with 1 unit wheel chock Tires and Rimes —12+1 PCS 315 / 80 R 22,5 —Goodyear, Pirelli or Bridgestone Mud Cover —2 PCS. Galvanized steel mudguards with plastic edges. Spear Wheel Carrier —1 piece tire carrier Tool Box —1 PCS Tool Box. Water Tank —40-liter Plastic water tank with liquid soap cup Paint —Steel Material surface are cleaned by grit metal and send which is shot blasted on the surfaces of the metal. —2 Floor Epoxy primers are made and paint will be choose on demand of the customer, —STANDART YELLOW Electrical System and Lightening System —3 units amber-colored lights placed on the both side, —Park lamps at the rear side of the vehicle, —license plate lamps, —reflector triangles, —Flame proof electrical system —2 X 7-pin electrical socket. Equipment (Tools) —Hub key, —Axles Bolt Nut key, —Tool box keys, Hydraulic System —5 stage Cold Shooting Steel Profile and Dual Lift x 5700 Front and middle of the lift cylinder with mounting brackets Tipping Weight 50 – 52 tons Oil Tank —Oil Tank made from 3 mm thickness steel sheet Volume —32 m ³ Legal Payload —32,5 ton Max. Payload — 54,5 ton Total Combination —51 ton

Marka: TAD Model: Jumbo 30-3 Tip: poluprikolica sa niskom platformom Godina proizvodnje: 2024 Kapacitet podizanja: 30000 kg Neto težina: 9700 kg Ukupna težina: 39700 kg Lokacija: Ukrajina Volochisk Datum objavljivanja: 21. 5. 2024. Autoline ID: YY15816 TAD. JUMBO 30-3 полуприцеп для перевозки строительной, дорожной, сельскохозяйственной техники, промышленных грузов. Особенностью данной модели является небольшая погрузочная высота, 800 мм (с возможностью понижения до 760 мм) и дополнительные углубления под колёсную технику 500 мм, углубления накрыты снимающимися трапами. Также прицеп оборудован съемными заездными трапами грузоподъемностью 20 т каждый. Задняя ось для улучшения манёвренности самоустанавливающаяся, передняя подъёмная. Межосевое расстояние между первой и второй осями увеличено, что позволяет увеличить без оплатную осевую нагрузку на переднюю ось, как на одинарную, для Украины это 11 т (вместо 7.33 строенные ося). Для других стран согласно местным законодательствам. Для перевозки широких грузов предусмотрены уширители, до 3300 мм. Прицеп соответствует правилам и нормам перевозок в ЕС. Изготовлен с высокопрочных сталей марок S350, S670. При проектировании и производстве мы используем большой опыт нашей компании как крупного международного перевозчика негабаритных грузов (более 18 лет, более 70 прицепов в парке). Исходя из этого мы предлагаем для Вас качественную, проверенную, надежную технику для длительной и выгодной эксплуатации. С большим сроком гарантии (3 года) и выгодной ценой. Обращайтесь, будем рады сотрудничеству! Технические характеристики: * грузоподъемность 30000 кг * полная масса до 39700 кг * собственная масса - до 9700 кг * ширина 2550 мм * расширение 3200 мм * длина рабочей платформы 10388 мм * длина гузнека 3212 мм * высота рабочей платформы 800 мм (в углублениях 500мм) * высота седла тягача 1050 мм / ± 100 мм * межосевое расстояние 1а ось-2а ось 2500 мм * межосевое расстояние 2а ось-3я ось 1360мм * нагрузки на сцепное устройство 16200кг * нагрузки на оси 27000кг * скорость 80км\ч Технический описание: * Гузнек - длина 3200 мм, настил металлический, толщиной 16 мм и транспортная фанера в местах заезда техники толщиной 25 мм * Рабочая - платформа: длина 10388 мм, настил комбинированный с использованием рифлёного листа металла толщиной 5 мм, транспортной фанеры толщиной 25 мм, и специального резинового покрытия толщиной 30 мм в месте заезда техники. Платформа изготовлена из специальной углублениями под колеса техники, которые выравниваются в ровную платформу с помощью специальных трапов * Оси - BPW * Подвеска - пневматическая, с двойной полурессорой * Пневмосистема - WABCO или HALDEX с ABS / EBS * Електосистема - Светотехника производства WAS, питание 24В * Опоры - JOST * Сварная конструкция - Высокопрочная сталь: S355J2 (прочность 355MPa) S690QL (прочность 690MPa) Обработка и покраска - после сварки рама проходит дробеструйную обработку, после чего покрывается двумя слоями цинксодержащего грунта, и двумя слоями полиуретановой краски. • контроль качества сварных швов осуществляется магнитно-порошковым методом, специалистом с соответствующим сертификатом TAD. JUMBO 30-3 напівпричіп для перевезення будівельної, дорожньої, сільськогосподарської техніки, промислових вантажів. Особливістю даної моделі є невелика навантажувальна висота, 800 мм (з можливістю зниження до 760 мм) і додаткові поглиблення під колісну техніку 500 мм, поглиблення накриті знімаються трапами. Також причіп обладнаний знімними заїзними трапами вантажопідйомністю 20 т кожен. Задня вісь для поліпшення маневреності самовстановлювана, передня підйомна. Міжосьова відстань між першою і другою осями збільшена, що дозволяє збільшити без оплатне осьове навантаження на передню вісь, як на одинарну, для України це 11 т (замість 7.33 строєні ося). Для інших країн відповідно до місцевих законодавств. Для перевезення широких вантажів передбачені розширювачі, до 3300 мм. Причіп відповідає правилам і нормам перевезень в ЄС. Виготовлений з високоміцних сталей марок S350, S670. При проектуванні і виробництві ми використовуємо великий досвід нашої компанії як великого міжнародного перевізника негабаритних вантажів (понад 18 років, понад 70 причепів в парку). Виходячи з цього ми пропонуємо для Вас якісну, перевірену, надійну техніку для тривалої і вигідної експлуатації. З великим терміном гарантії (3 роки) і вигідною ціною. Звертайтеся, будемо раді співпраці! Технічні характеристики вантажопідйомність 30000кг повна маса до 39700кг власна маса – до 9700кг ширина 2550мм розширення 3200мм довжина робочої платформи 10388мм довжина гузнека 3212мм висота робочої платформи 800мм(в заглибленнях 500мм) висота сідла тягача 1050мм/±100мм міжосьова відстань 1а вісь-2а вісь 2500мм міжосьова відстань 2а вісь-3я вісь 1360мм навантаження на зчепний пристрій 16200кг навантаження на осі 27000кг швидкість 80км\год Технічний Опис * Гузнек - довжина 3200мм, настил металевий товщиною 16мм та транспортна фанера в місцях заїзду техніки товщиною 25мм * Робоча - платформа: довжина 10388мм, настил комбінований з використанням рефленого листа металу товщиною 5мм, транспортної фанери товщиною 25мм, та спеціального гумового покриття товщиною 30мм в місці заїзду техніки. Платформа виготовлена зі спеціальним заглибинами під колеса техніки, які вирівнюються в рівну платформу за допомогою спеціальних трапів * Осі - BPW * Підвіска - пневматична, з подвійною напівресорою * Пневмосистема - WABCO або HALDEX з ABS/EBS * Електросистема - Світлотехніка виробництва WAS, живлення 24В * Опори - JOST * Зварна конструкція - Високоміцна сталь: S355J2 (міцність 355MPa) S690QL (міцність 690MPa) * Обробка та покраска - Після зварювання рама проходить дробоструйну обробку, після чого покривається двома слоямими цинковмісного грунту, та двома слоямими поліуретанової фарби. • контроль якості зварних швів здійснюється магнітно-порошковим методом, спеціалістом з відповідним сертифікатом

Marka: Reis Treyler Model: 54m3 Tip: poluprikolica za prevoz metalnog otpada Godina proizvodnje: 04/2023 Zapremina: 54 m³ Kapacitet podizanja: 36500 kg Neto težina: 8500 kg Ukupna težina: 45000 kg Lokacija: Turska Selçuklu / KONYA Datum objavljivanja: 21. 5. 2024. Autoline ID: LT33519 54 m3 TIPPER SEMI-TRAILER TECHNICAL SPECIFICATION Chassis —High Strength Steel “I” profile it is produced with gas welding, it has high-quality strength Chassis dimension 400mm deep x 120mm Fifth Wheel Height —1250 mm , Tire weight of the trailer with net payload of 28 ton King Pin —2" king – pin detachable made by SAE standards 8 bolt type. Over All Lenght Dimension —Length 11819 mm x Width 2550 mm x Height 3630 mm —WITH WHEEL BASE OF 8000 MM FROM THE CENTER FO THE KING-PIN Tipper Box —Length 10500 mm x Width 2230 mm x Height 2550 mm WITH REAR DOOR OPENING IN THE MIDDLE WITH CENTRAL LOCKS. Axle —3 x 09000 kg carrying capacity SAF BRAND DISC BRAKE SYSTEM with first lifting axle Distance Between Axles — 1310 mm Brakes & Suspension —Air Suspension with front lifting axle optional —EBS Brake System WABCO brand, 2S2M RSS Stability system 2 ABS sensor mounted on the center axle. — Automatic Slack Adjuster , 2x60 liter Air Tank mounted under the chassis Landing gear —Double Speed, —24000 kg carrying capacity, —JOST brand mechanical Landing Gears, TYPE. Rear Bumper —Suitable 70/221 / AT-version of the rear bumper, Tires and Rimes —6+1 PCS 385 65 R 22,5 Single tire type WITHOUT SPARE WHEEL CARRIER — Goodyear, Bridgestone, Pirelli or Equivalent brand —0 offset 22,5 x 9 Rim, 280,8 x 335 x 10 wheel stud M 22 x 1,5 Mud Cover —6 PCS. Full plastic Mud Flap with steel galvanized holders and Mud Flap on the edges. Toolbox —1 PCS Tool Box. Tipping Cylinder —Single cylinder is mounted on the body Hidromas GHS175-5KD 6425, Paint —Steel Material surface are cleaned by grit metal and send which is shot blasted on the surfaces of the metal. —2 Floor Epoxy primers are made and paint will be choosing on demand of the customer, —Finally Logo applications are made, (optional Galvanized chassis) Electrical System and Lightening System —3 Units amber-colored lights placed on the both side park lamps at the rear side of the vehicle, —license plate lamps, —reflector triangles, —Flame proof electrical system —2 X 7 and 1x15 -pin electrical socket 24 volt . (Euro.2 or Euro.3 Electrical System) 54 m3 TIPPER YARI RÖMORK TEKNİK ŞARTNAMESİ Şasi -Yüksek Mukavemetli Çelik "I" profil gaz kaynağı ile üretilmiştir, yüksek kaliteli mukavemete sahiptir Şasi boyutu 400mm derin x 120mm Beşinci Teker Yüksekliği -1250 mm, 28 ton net taşıma yükü ile treylerin lastik ağırlığı King Pim -2" king - pim sökülebilir SAE standartlarına göre 8 cıvata tipi. Tüm Uzunluk Ölçüleri -Uzunluk 11819 mm x Genişlik 2550 mm x Yükseklik 3630 mm -KING-PIN MERKEZINDEN ITIBAREN 8000 MM TEKERLEK TABANI ILE Damperli Kasa -Uzunluk 10500 mm x Genişlik 2230 mm x Yükseklik 2550 mm ARKA KAPI ORTADAN AÇILIR MERKEZİ KİLİTLİ. Aks -3 x 09000 kg taşıma kapasiteli SAF MARKA DİSK FREN SİSTEMİ ile birinci kaldırma aksı Akslar Arası Mesafe - 1310 mm Frenler ve Süspansiyon -İsteğe bağlı ön kaldırma akslı Hava Süspansiyonu -EBS Fren Sistemi WABCO marka, 2S2M RSS Stabilite sistemi Orta aksa monte edilmiş 2 adet ABS sensörü. - Otomatik Gevşeklik Ayarlayıcı, Şasi altına monte edilmiş 2x60 litre Hava Tankı İniş takımı -Çift Hız, -24000 kg taşıma kapasitesi, -JOST marka mekanik İniş Dişlileri, TİP. Arka Tampon -Arka tamponun 70/221 / AT versiyonuna uygundur, Lastikler ve Jantlar -6+1 ADET 385 65 R 22,5 YEDEK TEKERLEK TAŞIYICISI OLMAYAN tek lastik tipi - Goodyear, Bridgestone, Pirelli veya Eşdeğer marka -0 ofset 22,5 x 9 Jant, 280,8 x 335 x 10 tekerlek saplaması M 22 x 1,5 Çamur Kapağı -6 ADET. Çelik galvanizli tutucular ve kenarlarda Çamur Kapağı ile tam plastik Çamur Kapağı. Alet Kutusu -1 Adet Alet Kutusu. Devirme Silindiri -Tek silindir Hidromas GHS175-5KD 6425 gövde üzerine monte edilmiştir, Boya -Çelik Malzeme yüzeyi metal grit ile temizlenir ve metal yüzeylere kumlama yapılarak gönderilir. -2 Zemin Epoksi astar yapılır ve müşteri talebine göre boya seçimi yapılır, -Son olarak Logo uygulamaları yapılır, (opsiyonel Galvaniz şase) Elektrik Sistemi ve Aydınlatma Sistemi -3 Ünite Aracın arka tarafındaki her iki yan park lambasına yerleştirilmiş amber renkli ışıklar, -plaka lambaları, -Yansıtıcı üçgenler, -Alev geçirmez elektrik sistemi -2 X 7 ve 1x15 -pin elektrik soketi 24 volt (Euro.2 veya Euro.3 Elektrik Sistemi)

Marka: Zrůst Model: ZPT 27 Tip: prikolica sa niskom platformom Godina proizvodnje: 0/2023 Prvo registrovanje: 2023 Kapacitet podizanja: 20500 kg Neto težina: 6500 kg Ukupna težina: 27000 kg Lokacija: Češka Chrudim Datum objavljivanja: više od 1 meseca Autoline ID: VX22896 • délka ložné plochy 8.000 mm • šířka max 2.550 mm • celková délka 10.100 mm • ložná výška min. cca 910 mm • hmotnost užitečná: 20.500/20.500 kg • maximální povolená/technická hmotnost 27.000/27.000 kg • provozní hmotnost cca 6.500 kg • Specifikace: • rám svařená konstrukce z pevnostní oceli, tryskáno, podélníky I profil, • příčníky s obvodovým lemem U profil pro uložení fošen, v zadní části čep pro • uložení nájezdů, zadní část zešikmená pro snadnější nájezd • podpěry 1 ks vpředu plynule stavitelná, 2ks zadní – přestavení po 60 mm • oj pevná, oko 50 Rockinger, výška 950 mm • nápravy 3x9t GIGANT (SRN), brzda 300x200, samostavitelné brzdové páky • pérování vzduchové GIGANT + stop ventil pro zvedání/spouštění podlahy • brzdová soustava Wabco ABS EBS 2S/2M, park. brzda pružinové válce "TRISTOP" • pneu 12ks dvoumontáž 235/75-R 17,5 dle výrobce • ráfky 12ks ocelové 6,75 x 17,5 pro dvoumontáž-10 děr • blatníky 4ks blatník + zástěrky • elektroinstalace 24 V vodotěsná dle norem DIN, propoj 2x7 pol • osvětlení 2ks přední bílé, 6ks boční oranž. poziční světla, 2ks • zadní, 2ks osvětlení RZ včetně držáku RZ, 2ks boční tykadla • zadní panel součást rámu, s uložením zadních lamp a RZ s osvětlením • nástavba podlaha fošny modřín tl.45 mm, • 5 párů třmenů v obvodovém lemu, 6 párů upínacích ok 5 t • přední čelo 400 mm ocelové, odnímací • nájezdy 2 ks zadní jednodílné nájezdové rampy 2.800x700 mm, výplň modřín 45 mm • manipulace s nájezdy pomocí hydraulických válců, tlak z tažného vozidla • boční posun nájezdů ruční, jištění pomocí kurt • výbava náhradní kolo s košem, 1 ks bedna na nářadí 800 mm, boční zábrana • 2ks zakládací klíny, sada žárovek, maják, klíč na kola • povrchová úprava před lakováním pískováno+ základní nátěr+ vrchní nátěr • barevné provedení typ barvy akrylát: RAL 5002 • dokumentace TP, servisní knížky vozidla a náprav, ND brzd, obchodní podmínky, • záruční list, předávací protokol, návod k obsluze a údržbě, reklamační řád • záruka na rám a ostatní 12 měsíců od uvedení do provozu

Marka: Serin Model: 2023 Tip: furgon poluprikolica Kapacitet: 32 paleta Lokacija: Turska Datum objavljivanja: više od 1 meseca Autoline ID: KT35447 TECHINCAL SPECIFICATIONS OF PLYWOOD BOX SEMI-TRAILER Truck Tractor Type : 4x2 Truck Tractor with fifth wheel height 1100 mm Chassis: ST 52 Material “I” profile it is produced with gas welding, it has high quality strength, Standard Chassis Type, produced according to the 98/91 EEC standards Inner Lenght Dimension —Length 13.600 mm mm x Width 2600 mm x Height 2900 mm Over All Lenght Dimension —Length 13440 mm mm x Width 2480 mm x Height 2700 mm Platform: Phenolic waterproof plywood plate (30 mm) King Pin: 2” king pin according to the 94/20 EEC Pin detachable from below made by SAE standards 8 bolt type JOST Brand. Axles: 3 x 09.000 kg carrying capacity SAF brand Disc Brake Type Distance Between Axles: 1320 mm Brakes & Suspension: Air Suspension , EBS Brake System KNORR brand, automatic load adjusting valve 71/320 EEC and 2002/78 EC standards, Automatic Slack Adjuster Landing gear: Double Speed, 24000 kg carrying capacity SAF brand, Mechanical Landing Gears Rear Bumper: Suitable 70/221 / AT-version of the rear bumper Tire Chock: Carriers with 1 unit wheel chock Tires and Rimes: 6 PCS 385 65 R 22,5 Single tire type Mud Cover: 6 Units full plastic mudguards fited with galvanized steel holders. Spear Wheel Carrier: 1 piece tire carrier Basket type Tool Box: 1 pcs Plastic Tool Box 80 x 50 x 50 cm Paint: Steel Material surface are cleaned by grit metal and send, which is shot blasted on the surfaces of the metal, 2 Floor Epoxy primers are made and final paint with standard RAL 7024 or demand of the customer, total thickness of the paint 150 Electrical System and Lightening System —3 unit’s amber-colored lights placed on the both sides —Park lamps at the rear side of the vehicle (with a protective grill) —License plate lamps, —Reflector triangles, —Flame proof electrical system —2 X 7-pin and 1 x 15-pin electrical socket. Equipment : Tool box keys, Ro-Ro Lashing Rings, Fire Extinguisher Box, Rear Ladder, Forklift barriers, Rear Bumper, Optional Accessories, According to the demand optional accsesories will be added in the proposal Side Protectors: Side preventive protectors made from high strength material complied with 70/156 EEC standards BOX STRUCTURE Panels Dimensions —Front Wall 20 mm fiberglass reinforced plywood panels —Floor 30 mm waterproof plywood plate —Rear Door 30 mm insulated sandwich panel sandwich panel made from fiberglass and foam —Roof 10 mm polyester fiberglass translucent roof arched crossbeam reinforced 250 mm —Side Panels 20 mm fiberglass reinforced plywood panels Panel Structure —Plywood Panels covered with polyester film with thickness of 30 mm —Sandwich panels made from polyester sheet and foam Inner Lighting — 2 PCS Amber colored lights Rear Door —Two side rear doors with recessed locks, Sandwich panels made from polyester sheet and foam KUTU YARI RÖMORK TEKNİK ÖZELLİKLERİ Kamyon Traktör Tipi : 4x2 Kamyon Traktör, beşinci teker yüksekliği 1100 mm Şase: ST 52 Malzeme “I” profil, gaz kaynağı ile üretilmiş, yüksek kalite mukavemete sahip, Standart Şasi Tipi, 98/91 EEC standartlarına göre üretilmiştir. İç Uzunluk Ölçüsü —Uzunluk 13.600 mm mm x Genişlik 2600 mm x Yükseklik 2900 mm Tüm Uzunluk Ölçülerinde —Uzunluk 13440 mm mm x Genişlik 2480 mm x Yükseklik 2700 mm Platform: Fenolik su geçirmez kontrplak levha (30 mm) King Pin: 94/20 EEC'ye göre 2” king pin SAE standartlarına göre alttan sökülebilir pim 8 civata tipi JOST Marka. Dingiller: 3 x 09.000 kg taşıma kapasiteli SAF marka Disk Frenli Tip Dingil Arası Mesafe: 1320 mm Frenler & Süspansiyon: Havalı Süspansiyon , EBS Fren Sistemi KNORR marka, otomatik yük ayar valfi 71/320 EEC ve 2002/78 EC standartlarında, Otomatik Cırcır İniş Takımları: Çift Hızlı, 24000 kg taşıma kapasiteli SAF marka, Mekanik İniş Takımları Arka Tampon: Arka tamponun 70/221 / AT versiyonuna uygun Lastik Takozu: 1 adet takozlu taşıyıcılar Lastikler ve Jantlar: 6 ADET 385 65 R 22,5 Tek lastik tipi Çamurluk: 6 Adet galvanizli çelik tutucularla donatılmış tam plastik çamurluklar. Mızrak Taşıyıcı: 1 adet lastik taşıyıcı Sepet tipi Alet Kutusu: 1 adet Plastik Alet Kutusu 80 x 50 x 50 cm Boya: Çelik Malzeme yüzeyi grit metal ile temizlenir ve metal yüzeylerine kumlama yapılarak gönderilir, 2 Kat Epoksi astar yapılıp son boya RAL 7024 standardında veya müşteri talebi ile toplam boya kalınlığı 150 Elektrik Sistemi ve Aydınlatma Sistemi —3 ünitenin her iki yanına yerleştirilmiş kehribar rengi ışıklar —Aracın arka tarafındaki park lambaları (koruyucu ızgaralı) —Plaka lambaları, —Yansıtıcı üçgenler, —Ateşe dayanıklı elektrik sistemi —2 X 7 pimli ve 1 x 15 pimli elektrik prizi. Ekipman : Alet kutusu anahtarları, Ro-Ro Bağlama Halkaları, Yangın Söndürme Kutusu, Arka Merdiven, Forklift bariyerleri, Arka Tampon, Opsiyonel Aksesuarlar Talebe göre opsiyonel aksesuarlar teklife eklenecektir. Yan Koruyucular: 70/156 EEC standartlarına uygun yüksek mukavemetli malzemeden üretilmiş yan koruyucular KUTU YAPISI Panel Ölçüleri —Ön Duvar 20 mm fiberglas takviyeli kontrplak paneller —Zemin 30 mm su geçirmez kontrplak levha —Arka Kapı 30 mm yalıtımlı sandviç panel fiberglas ve köpükten yapılmış sandviç panel —Çatı 10 mm polyester cam elyafı yarı saydam çatı kemerli çapraz kiriş takviyeli 250 mm —Yan Paneller 20 mm fiberglas takviyeli kontrplak paneller Panel Yapısı —30 mm kalınlığında polyester film kaplı kontrplak levhalar —Polyester levha ve köpükten yapılmış sandviç paneller İç Aydınlatma — 2 ADET Amber renkli ışıklar Arka kapı —Gömme kilitli iki yan arka kapı, Polyester levha ve köpükten yapılmış sandviç paneller

Marka: Serin Model: 2023 Tip: poluprikolica sa ravnom platformom Godina proizvodnje: 04/2023 Prvo registrovanje: 2023-04 Lokacija: Turska Selçuklu / KONYA Datum objavljivanja: više od 1 meseca Autoline ID: LM12425 Fifth wheel height —1350 mm Total length —12800 mm Total Width —2600 mm Semi-trailer suitable for —6x4 Truck Tractor Chassis —The Trailer has to lay on a special steel profile which connects the saddles. —On the special profile proper reinforcements have to be located for connection points of the running gears —Material is ST52 steel plate according to the dimensions of International Standards Cargo Deck —The flat bed has to be covered with chequered plate (3+1=4mm thickness), reinforced with crossbeam’s chassis by U profiles. Front Wall, Side Covers and River Cover —Fixed type height of front wall be bolt and it has to be from 2,5 mm thickness channeled steel plate —Side Covers made from 5 PCS. —Open able type with one piece 1000 mm height and bolted. 300mm additional steel. —Rear Covers with open able operation. Roof Grill type —Portable steel profile assembled of the top of the side doors. With an option to be disassembled during loading of Containers. Canvas —Manuel type of canvas pleased on the top of the front wall. King Pin — 3½” king – pin detachable from below made by SAE standards 8 bolt type. Axles —3 x 12000 kg carrying capacity SERİN brand Distance between Axles —1380 mm Brake and Suspension System —MECHANICAL Suspension —Drum Brake System — Wabco Brake System — ABS Brake System Landing Gears —Double Speed, —24000 kg carrying capacity, —Jost brand two speed mechanical Landing Gears, Rear Bumper —Suitable 70/221 / AT-version of the rear bumper, Wheel Chock —Carriers with 1 unit wheel chock Tires & Wheels —12 +1 PCS 315 80R 22,5 — Goodyear-Pirelli-Bridgestone Mudguard —2 pcs galvanized steel mudguards with plastic edges. Spare Tire Carrier —double tire piece tire carrier Box —1 unit Plastic Tool Box, —1 unit fire distinguisher plastic carrier’s box. Paint —Material cleaned and grit (metal) material is blasting, —2 Floor Epoxy primers are made and the desired color, —In the final layer is painted with 2 coats acrylic paint Electrical Equipment and Lighting —There are amber-colored lights in the side by 3 units,— Park at the rear lamps, —License plate lamp, —Reflector triangles, —Electrical system; Flame proof electrical system 2 X 7-pin electrical socket. Accessories —Hub key, —Axles Bolt Nut key, —Tool box keys, Shipping type —3 units will be one set

Marka: Dinkel Model: DAP 18000 Baustoffanhänger SAF-Achsen 7.100mm Tip: prikolica sa ravnom platformom Prvo registrovanje: 2023-03 Kapacitet podizanja: 18000 kg Ukupna težina: 18000 kg Lokacija: Nemačka Burghaun/Gruben Datum objavljivanja: više od 1 meseca Kataloški broj prodavca: d17068 Dinkel DAP 18000 Baustoffanhänger SAF-Achsen 2 fabrikneue DINKEL – Pritschenanhänger 2-achsig TYP DAP 18000 in Leichtbauweise Aufbau i.d.M. im Lichten ca. 7.100 x 2.480 x 1.000 mm Fahrhöhe unbeladen ca. 1.320mm (Einstellbereich -10/+30 mm) Außenbreite 2.550 mm Leergewicht nach DIN ca. 3.420 kg Fahrgestell Spezialstahlrahmen an den Verbindungsstellen elektrisch verschweißt. Drehgestell mit Kugellenkkranz voll durchlenkbar. Gut dimensionierter Außenrahmen Zugdeichsel mechanisch verstellbar Luftfederung. Kunststoffradabdeckung über der Vorder- und Hinterachse.EG-Unterfahrschutz. Unterlegkeile mit Halter.Seitlicher Anfahrschutz aus eloxiertem Aluminium montiert als Aufstieg verwendbar.Sämtliche Stahlteile sandgestrahlt Aufbau Feststehende Stirnwand aus Aluhohlkammerprofilen – 25 mm mit stabilen Stirnwandstützen und bewährten DINKEL-Frontformstahlabschluß Höhe ca. 1.200 mm Seitenwände und Rückwand ebenfalls aus 25 mm Alu-Hohlkammerprofilen Höhe 1.000 mm aushäng- und abklappbar ohne Planösenprofil Boden 27 mm Buchen Siebdruckplatten raue Oberfläche. Außenrahmen mit Oberfläche bündig. Ringsumlaufend Silikonabdichtung Achsen Zwei 9.000 kg SAF-Sauer luftgefedert mit Scheibenbremsen Bremsen WABCO Druckluftbremsanlage mit nach EG-Norm 71/320 EWG inkl. PREV (Park-Löse-Sicherheitsventil.Federspeicherbremszylinder als Standbremse ALU – Luftkessel DUO-Matic-Luftanschluß Bereifung Einfachbereifung 385/65 R 22,5 – 4-fach Premiumfabrikat nach Wahl des Herstellers ohne Halter ohne E-Rad Beleuchtung Nach EG-Norm in Mehrkammerausführung inkl. Seitenleuchten in LED-Ausführung.Heckseitig Positionsleuchten mit Gummiarm in LED Ausführung Kpl. Beleuchtungsanlage in LED Ausführung Zusätzlicher LED Rückfahrscheinwerfer V-Leitung 15-polig Lackierung Sämtliche Stahlteile sandgestrahlt und grundiert.Bordwandnieten Edelstahl ohne Lackierung Aufbau in MB 9147 arktikweiß Fahrgestell in MB 7350 novagrau Achskörper KTL beschichtet schwarzKunststoffteile schwarzFeuerverzinkte Teile unlackiert Felgen werkssilber Ausstattungvorteile/Sonderausstattung inkl alle Beleuchtungseinheiten mit wartungsfreundlichen Bayonettanschlüssen 200 mm hoher Verschleißschutzstreifen an Stirnwand bedienungsfreundliche Zuggabelhöheneinstellung Mittelrungen aushäng- und abklappbar Heckrungen quer in Fahrtrichtung gestellt feststehend Bordwandanschlagpuffer EG-Unterfahrschutz Seitenwände mit verschieb- und klappbaren Aufstiegtritten Länge ca. 500 mm DINKEL Federentlastung/Hebehilfe der Seitenbordwände Alu-Staplerrammschutz seitlich und heckseitig gelochter angeschrägter Außenrahmen für Zurrgurteinhängung Lochabstand ca. alle 200 mm (Nutzhöhe Seitenwände ca. 950 mm) Aufbauausführung nach Code XL Werkzeugkasten Kunststoff ca. 800x400x500 mm abschließbar retroreflektierende Konturmarkierung 4 x Aufstieggriff jeweils an den Aufbauecken Leichtbau Zugdeichsel mechanisch verstellbar Lochrahmen Hebehilfe Verschiebbare Klapptritte Aluluftkessel Werkzeugkasten LED-Beleuchtung LED Rückfahrscheinwerfer Auf Wunsch unterbreiten wir Ihnen ein Leasing- oder Finanzierungsangebot Herr Ebert und Herr Seidel (Tel. 06652/9666-0) betreuen Sie gerne Weitere Informationen finden Sie auf unserer Homepage pokazati kontakte !!! Irrtümer Änderungen und Zwischenverkauf vorbehalten !!!

Marka: Reis Treyler Model: FLATBED Tip: poluprikolica platforma Godina proizvodnje: 04/2023 Prvo registrovanje: 2023-04 Kapacitet podizanja: 42500 kg Neto težina: 7800 kg Ukupna težina: 50300 kg Lokacija: Turska Selçuklu / KONYA Datum objavljivanja: 20. 5. 2024. Autoline ID: FK33520 TEHCHINCAL SPECIFICATIONS OF FLAT BED SEMI-TRAILER Truck Tractor Type —6x4 Truck Tractor Chassis —ST 52 Material “I” profile it is produced with gas welding, it has high quality strength, Extandble Chassis Type Inner Lenght Dimension —Length 13.600 mm mm x Width 2480 mm x Height 1550 mm Over All Lenght Dimension —Length 13.800 mm mm x Width 2550 mm x Height 1550 mm Platform — Base chequered steel plate made from ST52 material with thicknes 4+1 mm Container twist lock —N/A King Pin —2” or 3 ½” king pin —Pin detachable from below made by SAE standards 8 bolt type. Axles — 2 x 16.000 kg carrying capacity SERIN brand Trilex Brake Type Distance Between Axles — 1320 mm Brakes & Suspension — Mechanical Suspension with Tandem Suspension System — Pneumatical Brake System WABCO brand, 2S2M RSS Stability system — Automatic Slack Adjuster Landing gear —Double Speed, —24000 kg carrying capacity QRC Brand —Mechanical Landing Gears Rear Bumper —Suitable 70/221 / AT-version of the rear bumper Tire Chock —Carriers with 1 unit wheel chock Tires and Rimes — 6 + 1 PCS 385/ 65 R 22,5 Single tire type — Goodyear, Bridgestone, Pirelli or Equivalent brand — 120 offset 22,5 x 11,75 Rim, 280,8 x 335 x 10 wheel stud M 22 x 1,5 Mud Cover — 6 Units full plastic mudguards fited with galvanized steel holders. Spear Wheel Carrier — 1 piece tire carrier Basket type Tool Box — 1 pcs Metal Tool Box 150 cm, 1 pcs Plastic Tool Box 80 cm Water Tank — 30 liters’ plastic Water Tank Paint —Steel Material surface are cleaned by grit metal and send, which is shot blasted on the surfaces of the metal. —2 Floor Epoxy primers are made and final paint with standard RAL 7024 or demand of the customer, Electrical System and Lightening System —3 unit’s amber-colored lights placed on the both sides —Park lamps at the rear side of the vehicle (with a protective grill) —License plate lamps, —Reflector triangles, —Flame proof electrical system —2 X 7-pin and 1 x 15-pin electrical socket. Equipment (Tools) —Hub key, Axles Bolt Nut key, Tool box keys —Ro-Ro Lashing Rings —Fire Extinguisher Box Optional Accessories — According to the demand optional accsesories will be added in the proposal Drop Side — 5 PCS Drop Sides with —Front Wall Height 1600 mm —4 PCS Pillars

Tip: prikolica platforma Kapacitet podizanja: 2820 kg Neto težina: 680 kg Ukupna težina: 3500 kg Lokacija: Poljska Gliwice Datum objavljivanja: 20. 5. 2024. Autoline ID: NU30555 PRODUCENT PRZYCZEP GROMEX Nasze przyczepy spełniają wszystkie standardy bezpieczeństwa. Jakość i trwałość naszych produktów jest dla nas bardzo ważna, dlatego wprowadziliśmy politykę oraz kontrolę jakości, aby mieć pewność, że każdy produkt był niezawodny i spełniał wysokie oczekiwania naszych klientów. JAKOŚĆ Tworząc nasze produkty, na pierwszym miejscu stawiamy wymagania jakościowe oraz stałą kontrolę naszych produktów. Ciągle ulepszamy procesy produkcji, a odpowiednio wyszkolony i doświadczony zespół pozwala nam na osiągnięcie wysokiej jakości produkcji i wytworzenie produktów szytych na miarę. Nasza fabryka wyposażona jest w nowoczesny park maszynowy, w którego skład wchodzą m.in. przecinarki plazmowe, prasy krawędziowe, prasy hydrauliczne, piły do obróbki aluminium, frezarki CNC. Nasze podzespoły zamawiamy u sprawdzonych dostawców. Produkujemy ultralekkie lawety wykonane z wysokiej jakości aluminium do przewozu pojazdów. Przyczepa wykonana jest w technologii panelowej z otworami na pasy zakuwanymi ze stali nierdzewnej. Laweta oparta jest na podzespołach firmy Al-Ko. Nasze lawety charakteryzują się solidnym wykonaniem i dużą wytrzymałością. Posiadamy homologację na wszystkie typy przyczep. Wyróżnia nas krótki termin realizacji zamówienia. Wszystkie nasze przyczepy są pod każdym względem zgodne z CERTYFIKATEM ZGODNOŚCI WE (COC) oraz mogą być zarejestrowane na stałe w państwach członkowskich o ruchu lewostronnym/prawostronnym i stosujących jednostki metryczne/imperialne dla prędkościomierza. Nowy model przyczepy L3-3500 8,5/2,1 3 osie . Przyczepa posiada aluminiową ramę dodatkowo wzmacnianą rozpoczynającą się dyszlem V zakończoną tylnym zderzakiem, podłoga wykonana z panelu otworowanego po 12 oczek zakutego stalowym wzmocnieniem boki zakończone profilem nie otworowanym wzmacniającym konstrukcję nośną FORMY SPRZEDAZY Faktura z VAT, wewnątrzwspólnotowa dostawa towaru lub eksport oraz gwarancja CECHY STANDARDOWE • Wymiary wewnętrzne/ładunkowe: 600 x 210cm • Ładowność: 2820kg • dopuszczalna masa całkowita: 3500kg • Masa własna: 680kg • 3 osie hamowane 3x1350kg AL-KO • Urządzenie najazdowe 3500kg • Opony 195 R10C / R13C • Podwozie bardzo stabilna, spawana konstrukcja z dyszlem V • Rama nośna wykonana z aluminium • Platforma transportowa wykonana z aluminiowych paneli podłogowych z systemem LOHR • Wszystkie części ramy są gorące -ocynkowane zanurzeniowo w kąpieli zanurzeniowej i dzięki temu odporne na korozję • Sprzęg kulowy ze wskaźnikiem bezpieczeństwa • Rampy aluminiowe 2,5m - bardzo mocne! • Koło podporowe • Oświetlenie bezpieczeństwa Multi-LED 12 / 24V • w tym koło zapasowe WYPOSAŻENIE DODATKOWE Wciągarka ręczna 300 zł / 68 € 6 x amortyzatory – 1470 zł / 334 € Rampy przednie – 1850 zł / 420 € Sprzęg bezpieczeństwa AKS- stabilizator jazdy 2200 zł / 500 € Skrzynia na pasy mocujące – 330 zł / 75 € Felgi aluminiowe – 440 zł brutto za sztukę / 100 € Wciągarka elektryczna – 2450 zł / 556 € akumulator z instalacją pod wyciągarkę – 1600 zł / 363 € Kliny pod koła 2 sztuki – 400 zł / 90 € tym dodatkowe wsporniki z tyłu (PODPORY) – 1100 zł / 250 €

Tip: prikolica platforma Godina proizvodnje: 2024 Kapacitet podizanja: 2080 kg Neto težina: 620 kg Ukupna težina: 2700 kg Lokacija: Poljska Gliwice Datum objavljivanja: 20. 5. 2024. Autoline ID: GD30556 PRODUCENT PRZYCZEP G R O M E X Nasze przyczepy spełniają wszystkie standardy bezpieczeństwa. Jakość i trwałość naszych produktów jest dla nas bardzo ważna, dlatego wprowadziliśmy politykę oraz kontrolę jakości, aby mieć pewność, że każdy produkt był niezawodny i spełniał wysokie oczekiwania naszych klientów. JAKOŚĆ Tworząc nasze produkty, na pierwszym miejscu stawiamy wymagania jakościowe oraz stałą kontrolę naszych produktów. Ciągle ulepszamy procesy produkcji, a odpowiednio wyszkolony i doświadczony zespół pozwala nam na osiągnięcie wysokiej jakości produkcji i wytworzenie produktów szytych na miarę. Nasza fabryka wyposażona jest w nowoczesny park maszynowy, w którego skład wchodzą m.in. przecinarki plazmowe, prasy krawędziowe, prasy hydrauliczne, piły do obróbki aluminium, frezarki CNC. Nasze podzespoły zamawiamy u sprawdzonych dostawców. Produkujemy ultralekkie lawety wykonane z wysokiej jakości aluminium do przewozu pojazdów. Przyczepa wykonana jest w technologii panelowej z otworami na pasy zakuwanymi ze stali nierdzewnej. Laweta oparta jest na podzespołach firmy Al-Ko. Nasze lawety charakteryzują się solidnym wykonaniem i dużą wytrzymałością. Posiadamy homologację na wszystkie typy przyczep. Wyróżnia nas krótki termin realizacji zamówienia. Wszystkie nasze przyczepy są pod każdym względem zgodne z CERTYFIKATEM ZGODNOŚCI WE (COC) oraz mogą być zarejestrowane na stałe w państwach członkowskich o ruchu lewostronnym/prawostronnym i stosujących jednostki metryczne/imperialne dla prędkościomierza. Nowy model przyczepy L2-3500 5,0/2,1 2 osie. Przyczepa posiada aluminiową ramę dodatkowo wzmacnianą rozpoczynającą się dyszlem V zakończoną tylnym zderzakiem, podłoga wykonana z panelu otworowanego po 12 oczek zakutego stalowym wzmocnieniem boki zakończone profilem nie otworowanym wzmacniającym konstrukcję nośną FORMY SPRZEDAZY Faktura z VAT, wewnątrzwspólnotowa dostawa towaru lub eksport oraz gwarancja CECHY STANDARDOWE • Wymiary wewnętrzne/ładunkowe: 500 x 210cm • Ładowność: 2080kg • dopuszczalna masa całkowita: 2700kg • Masa własna: 620kg • 2 osie hamowane 2x1350kg AL-KO • Urządzenie najazdowe 2700kg • Opony 195 R10C / R13C • Podwozie bardzo stabilna, spawana konstrukcja z dyszlem V • Rama nośna wykonana z aluminium • Platforma transportowa wykonana z aluminiowych paneli podłogowych z systemem LOHR • Wszystkie części ramy są gorące -ocynkowane zanurzeniowo w kąpieli zanurzeniowej i dzięki temu odporne na korozję • Sprzęg kulowy ze wskaźnikiem bezpieczeństwa • Rampy aluminiowe 2,5m - bardzo mocne! • Koło podporowe • Oświetlenie bezpieczeństwa Multi-LED 12 / 24V • w tym koło zapasowe WYPOSAŻENIE DODATKOWE Wciągarka ręczna 300 zł / 68 € 6 x amortyzatory – 1470 zł / 334 € Rampy przednie – 1850 zł / 420 € Sprzęg bezpieczeństwa AKS- stabilizator jazdy 2200 zł / 500 € Skrzynia na pasy mocujące – 330 zł / 75 € Felgi aluminiowe – 440 zł brutto za sztukę / 100 € Wciągarka elektryczna – 2450 zł / 556 € akumulator z instalacją pod wyciągarkę – 1600 zł / 363 € Kliny pod koła 2 sztuki – 400 zł / 90 € tym dodatkowe wsporniki z tyłu (PODPORY) – 1100 zł / 250 €

Tip: prikolica platforma Kapacitet podizanja: 2120 kg Neto težina: 580 kg Ukupna težina: 2700 kg Lokacija: Poljska Gliwice Datum objavljivanja: 20. 5. 2024. Autoline ID: MJ30556 PRODUCENT PRZYCZEP G R O M E X Nasze przyczepy spełniają wszystkie standardy bezpieczeństwa. Jakość i trwałość naszych produktów jest dla nas bardzo ważna, dlatego wprowadziliśmy politykę oraz kontrolę jakości, aby mieć pewność, że każdy produkt był niezawodny i spełniał wysokie oczekiwania naszych klientów. JAKOŚĆ Tworząc nasze produkty, na pierwszym miejscu stawiamy wymagania jakościowe oraz stałą kontrolę naszych produktów. Ciągle ulepszamy procesy produkcji, a odpowiednio wyszkolony i doświadczony zespół pozwala nam na osiągnięcie wysokiej jakości produkcji i wytworzenie produktów szytych na miarę. Nasza fabryka wyposażona jest w nowoczesny park maszynowy, w którego skład wchodzą m.in. przecinarki plazmowe, prasy krawędziowe, prasy hydrauliczne, piły do obróbki aluminium, frezarki CNC. Nasze podzespoły zamawiamy u sprawdzonych dostawców. Produkujemy ultralekkie lawety wykonane z wysokiej jakości aluminium do przewozu pojazdów. Przyczepa wykonana jest w technologii panelowej z otworami na pasy zakuwanymi ze stali nierdzewnej. Laweta oparta jest na podzespołach firmy Al-Ko. Nasze lawety charakteryzują się solidnym wykonaniem i dużą wytrzymałością. Posiadamy homologację na wszystkie typy przyczep. Wyróżnia nas krótki termin realizacji zamówienia. Wszystkie nasze przyczepy są pod każdym względem zgodne z CERTYFIKATEM ZGODNOŚCI WE (COC) oraz mogą być zarejestrowane na stałe w państwach członkowskich o ruchu lewostronnym/prawostronnym i stosujących jednostki metryczne/imperialne dla prędkościomierza. Nowy model przyczepy L2-3500 4,6/2,1 2 osie. Przyczepa posiada aluminiową ramę dodatkowo wzmacnianą rozpoczynającą się dyszlem V zakończoną tylnym zderzakiem, podłoga wykonana z panelu otworowanego po 12 oczek zakutego stalowym wzmocnieniem boki zakończone profilem nie otworowanym wzmacniającym konstrukcję nośną FORMY SPRZEDAZY Faktura z VAT, wewnątrzwspólnotowa dostawa towaru lub eksport oraz gwarancja CECHY STANDARDOWE • Wymiary wewnętrzne/ładunkowe: 460 x 210cm • Ładowność: 2120kg • dopuszczalna masa całkowita: 2700kg • Masa własna: 580kg • 2 osie hamowane 2x1350kg AL-KO • Urządzenie najazdowe 2700kg • Opony 195 R10C / R13C • Podwozie bardzo stabilna, spawana konstrukcja z dyszlem V • Rama nośna wykonana z aluminium • Platforma transportowa wykonana z aluminiowych paneli podłogowych z systemem LOHR • Wszystkie części ramy są gorące -ocynkowane zanurzeniowo w kąpieli zanurzeniowej i dzięki temu odporne na korozję • Sprzęg kulowy ze wskaźnikiem bezpieczeństwa • Rampy aluminiowe 2,5m - bardzo mocne! • Koło podporowe • Oświetlenie bezpieczeństwa Multi-LED 12 / 24V • w tym koło zapasowe WYPOSAŻENIE DODATKOWE Wciągarka ręczna 300 zł / 68 € 6 x amortyzatory – 1470 zł / 334 € Rampy przednie – 1850 zł / 420 € Sprzęg bezpieczeństwa AKS- stabilizator jazdy 2200 zł / 500 € Skrzynia na pasy mocujące – 330 zł / 75 € Felgi aluminiowe – 440 zł brutto za sztukę / 100 € Wciągarka elektryczna – 2450 zł / 556 € akumulator z instalacją pod wyciągarkę – 1600 zł / 363 € Kliny pod koła 2 sztuki – 400 zł / 90 € tym dodatkowe wsporniki z tyłu (PODPORY) – 1100 zł / 250 €

Marka: Reis Treyler Model: 2023 Tip: poluprikolica kipera Godina proizvodnje: 02/2023 Prvo registrovanje: 2023-02 Zapremina: 30 m³ Kapacitet podizanja: 38000 kg Neto težina: 7300 kg Ukupna težina: 45300 kg Lokacija: Turska Selçuklu / KONYA Datum objavljivanja: 20. 5. 2024. Autoline ID: JJ32703 HALF PIPE TIPPER SEMI-TRAILER TECHNICAL SPECIFICATION Chassis —DOMEX 700 MC Material “I” profile is produced with gas welding; it has high-quality strength and reinforces with cross-beams from 700 MC material Box —Build from high-graded HARDOX 450 materials with wall thickness 4 mm x front and rear wall 4 mm x Floor 5 mm Fifth Wheel Height —1.150 mm / 1180 mm King Pin —2" kingpin and second kingpin position. —Pin detachable from below, made by SAE standards 8 bolt type. Over All Length Dimension —Length, 10714 mm x Width 2550 mm x Height 2986 mm (approximately) Size of the Bucket —Length 7300 mm x Width 2325 mm x Height 1450 mm (approximately) Operator Platform —There will be an operator platform in front of the superstructure Axle —3 x 09.000 kg carrying capacity, REİS brand Drum Brake Type —First axle with lifting mechanism —The third axle is fixed Distance Between Axles — 1320 mm Brakes & Suspension —Air Suspension —EBS Brake System KNORR brand, (2S/2M RSS) — Automatic Slack Adjuster Landing Gear —Double Speed —24000 kg carrying capacity —Mechanical Landing Gears OMS BRAND Rear Bumper —Suitable 70/221 / AT-version of the rear bumper Tires and Rimes —6 PCS 385 / 65 R 22,5 Single tire type —Pirelli, Lassa brand, or equivalent premium brand — 120 offset 22,5 x 11,75 Rim, 280,8 x 335 x 10-wheel stud M 22 x 1,5 Mud Cover —6 PCS. Plastic mudguards with plastic edges. Spear Wheel Carrier —1 PC tire carrier Reducer type Toolbox —1 PC Plastic 60 cm Toolbox. Paint —Steel Material surface is cleaned by grit metal and sent, which is shot blasted on the surfaces of the metal. —2 Floor Epoxy primers are made and finally painted with RAL 7016 or according to the demand of the customer Electrical System and Lightening System —3 unit’s amber-colored lights were placed on both sides —Park lamps at the rear side of the vehicle —License plate lamps, —Reflector triangles, —Flameproof electrical system —2 X 7-pin and 1 x 15-pin electrical socket. (The connection pins will be mounted on a specially designed front panel) —Electrical system is ASPÖCK brand Euro point 2 or Euro point 3 Equipment (Tools) —Toolbox keys Accessories —1 Unit Fire extinguisher box —2 Units of Tire Chocks —Ferry rings on the rear and front total 4 Units —Aluminum Side Protection —Document holder Hydraulic System —5 stages Cold Shooting Steel Profile and Dual Lift with stroke GHS 175 X 5 X 5550 C type HIDROMAS brand. Front lift cylinder with mounting brackets —WITHOUT OIL TANK AND HYDRAULIC VALVES Volume —30 m³

Marka: Serin Model: 2023 Tip: poluprikolica sa kliznom ceradom Godina proizvodnje: 04/2023 Prvo registrovanje: 2023-04 Zapremina: 82.36 m³ Neto težina: 8000 kg Ukupna težina: 40000 kg Lokacija: Turska Selçuklu / KONYA Datum objavljivanja: više od 1 meseca Autoline ID: PQ12424 Inner Length: —12300 mm Inner Width: —2480 mm Inner Height: —2700 mm Fifth Wheel Height —1400 mm Volume: —75.4m3 Empty Weight: Total Weight: —8000 Kg —40000 Kg Chassis: —ST 52 Material “I” profile it is produced with gas welding, it has high quality and chassis is suitable for 40000 kg loading capacity. Chassis Color will our standard Black. King Pin: —SAE standards 3 ½” diameter how is assembled with 8 PCS bolts and is produced from forged 42 Cr Mo4. Axles: —3 x 12 Serin Brand Axles with closed bearing system. —Front lifting axle will be automatically lifted after the over loading of the trailer. Distance between axles: —1380 mm Brake and Suspension System —Mechanical Suspension —SACSH brand Shock absorber —Drum Brake System —WABCO EBS Brake System —Automatic Slack Adjuster —11 level spring life suspension —Emergency Parking Brake System —Pneumatically drainage safety valve Side Walls Dimensions —4 covers 650mm Aluminum side doors, —Steel pillar —Sliding curtain sides Rear Wall: —Rear Door Container wall, —Aluminum hidden locking system, —Front Wall, Rear Door, Side Doors will be painted with red color. Canvas: —1000 g/m2 Sio-Line Brand Coated Panama Canvas. —Digital printing canvas: (Like Azania –BAKHRESA –JAMBO LOGO) Roof Profiles: —Special reinforced steel Profiles and roof will be reinforced with the two tensions chains. Floor Covering: —4 mm thickness chequered plate , Landing Gears: —JOST Brand, Having 24 000 Kg Carrying Capacity Two Speed Level Landing Gears. Tires and Rims: —6 + 1 PCS of 385/65 R 22,5 Tubeless Tires —Goodyear, Bridgestone or Pirelli 11,75 – 22,5 Plot Rims Spare Tire Carrier: —Two Spare Tire basket Boxes: —One PCS plastic tool box, — One PCS of plastic box for fire extinguisher — One PCS fire extinguisher Rings, Chains, Hooks —4 pieces of public ferries. —2 x 8 piece side cover installed inside the base mount ring. Mudguard —4 Pcs plastic type quarter mudguards with plastic edges. —Removable arm mudguards, —8 connections mudguards, —Aluminum Hook for pooling the curtain, Ladder —2.5 m high ladder portable mounted inside the back cover. Water Tank: —60 liters of Cr-Ni Water Tank Produced with Stainless Steel Paint: —Material cleaned and grit (metal) material is sand blasted blasting, —2 Floor Epoxy primers are made and the desired color, —In the final layer is painted with 2 coats acrylic paint, Electrical Accessories And Lighting —White Colored Corner Lights at Front Left and Front Right. —Five PCS of Amber Colored Lambs at Sides. —Park Lambs, License Plate Lamb and Triangular Reflector at Rear. —Electrical System is E Approved. 2 x 7 Electrical Sockets. Accessories —Hub key, —Axles Bolt Nut key, —Tool box keys, Laser Graphics —Digital laser printing will be made according to company logo, Reflector —Rear Door, will be covered with reflecting stripe Rear Bumper —Suitable for RO- RO transporting

Marka: Reis Treyler Model: General Kargo Tip: poluprikolica sa ravnom platformom Godina proizvodnje: 04/2023 Prvo registrovanje: 2023-04 Zapremina: 33 m³ Kapacitet podizanja: 36500 kg Neto težina: 8500 kg Ukupna težina: 45000 kg Lokacija: Turska Selçuklu / KONYA Datum objavljivanja: 22. 5. 2024. Autoline ID: PY33520 TECHNICAL SPECIFICATION FOR GENERAL CARGO SEMITRAILER Dimensions —Overall length : 13.600 mm —Overall width : 2.600 mm —Payload : 36.500 kg —GVW : 45 ton Fifth Wheel Height —1150 the fifth wheel height will be negotiated Chassis —The trailer will lay on a special steel profile which connects the saddles. —On the special profile proper reinforcements must be located for connection points of the running gears. —Material is ST52 steel plate according to the dimensions of International Standards. Cargo Deck (Lashing Cargo Deck accessories will be negotiate) —The flat bed will be covered with Plywood (30 mm thickness), reinforced horizontally from chassis by L profiles. —In the length of the chassis there will be 3 Units Lashing points that will stand 5 ton pulling pressure. Front Wall, Side Covers and River Cover (The side doors and Front wall will be optional after the agreement will be discuss for details) —Fixed type height of front wall be bolt and it will be from 25 mm thickness channeled Aluminum plate —Side Covers made from 5 pcs. Fixed type with one piece 650 mm height and bolted with rivets. —Rear Covers with openable operation. King Pin 3, 5” king – pin detachable from below made by SAE standards 8 bolt type. Axles 3 x 9000 kg carrying capacity SAF brand Distance between Axles 1320 mm Brake and Suspension System —Air Suspension —EBS Brake System —Front Lifting Axle with installation remote control from Truck Cabin. Landing Gears —Double Speed, —24000 kg carrying capacity, —SAF brand mechanical Landing Gears, Rear Bumper Suitable 70/221 / AT-version of the rear bumper, Wheel Chock Carriers with 1 unit wheel chock Tires & Wheels — 6 +1 PCS 385 65 R 22,5 —FULDA, GOODYEAR, BRIDGESTONE or LASSA Mudguard —6 pcs plastic mudguards with steel holders. Spare Tire Carrier —1 piece tire carrier Box —1 unit Plastic Toolbox, —1 unit fire distinguisher plastic carrier’s box. Water Tank 60 lit water tank which is made of stainless steel. Paint —Material cleaned and grit (metal) material is blasting, —2 Floor Epoxy primers are made and the desired color, —In the final layer is painted with 2 coats acrylic paint total paint cover 150-180 micron. Electrical Equipment and Lighting —There are Amber-colored lights in the side by 3 units, —Park at the rear lamps, —License plate lamp, —Reflector triangles, —Electrical system; Flame proof electrical system —2 X 15 pin electrical socket. Accessories —Hub key, (with Serin Axles) —Axles Bolt Nut key, (with Serin Axles) —Toolbox keys, —Square Type Pillars 21 unit with dimension 80 x 80 x 1200 mm, —Side protective bars according to the EC Regulation.

Marka: Reis Treyler Model: 2023 Tip: poluprikolica s ceradom Godina proizvodnje: 02/2023 Prvo registrovanje: 2023-02 Kapacitet podizanja: 28000 kg Neto težina: 7200 kg Ukupna težina: 35200 kg Lokacija: Turska Selçuklu / KONYA Datum objavljivanja: danas Autoline ID: AE32237 TECHNICAL SPECIFITACIONS OF CURTAINSIDER OPTIMA SEMI-TRAILER Truck Tractor Type — 4x2 Truck Tractor Chassis — ST 52 Material “I” profile it is produced with gas welding, it has high quality strength, Standard Chassis Type, produced according to the 98/91 EEC standards Inner Lenght Dimension — Length 13.600 mm mm x Width 2480 mm x Height 2820 mm Over All Lenght Dimension — Length 13.600 mm mm x Width 2550 mm x Height 4050 mm Platform — Phenolic waterproof plywood plate (30 mm) with rings and iron plate Container twist lock — Without Container Locks King Pin — 2” or 3 ½” king pin according to the 94/20 EEC —Pin detachable from below made by SAE standards 8 bolt type. Axles — 3 x 9.000 kg carrying capacity SAF brand Disc Brake Type — First axle is lifting — Third axle is steering Distance Between Axles — 1320 mm Brakes & Suspension — Air Suspension — EBS Brake System KNORR or WABCO brand, 4S3M RSS Stability system RSS according to 71/320 EEC and 2002/78 EC standards — Automatic Slack Adjuster Landing gear — Double Speed, — 24000 kg carrying capacity OMS Brand — Mechanical Landing Gears Rear Bumper — Suitable 70/221 / AT-version of the rear bumper Tire Chock — Carriers with 2 unit wheel chock Tires and Rimes — 6 PCS 385 65 R 22,5 Single tire type —Goodyear, Bridgestone, Pirelli or Equivalent brand — 120 offset 22,5 x 11,75 Rim, 280,8 x 335 x 10 wheel stud M 22 x 1,5 Mud Cover — 6 Units full plastic mudguards fited with galvanized steel holders. Spear Wheel Carrier — 1 piece tire carrier Reducer type Tool Box — 1 pcs Metal Tool Box 150cm Paint — Steel Material surface are cleaned by grit metal and send, which is shot blasted on the surfaces of the metal. — 2 Floor Epoxy primers are made and final paint with BLACK, GRAY or GALVANIZED Color Electrical System and Lightening System — 3 unit’s amber-colored lights placed on the both sides — Park lamps at the rear side of the vehicle (with a protective grill) — License plate lamps, — Reflector triangles, — Flame proof electrical system — 2 X 7-pin and 1 x 15-pin electrical socket. Equipment (Tools) — Tool box keys — Ro-Ro Lashing Rings — Document holder — Fire Extinguisher Box, Rear Ladder, Forklift barriers, Rear Bumper, Optional Accessories — According to the demand optional accsesories will be added in the proposal CURTAIN SUPERSTRUCTURE Roof System — Aluminum rail profile roof system suitable for Custom Clearance — Lifting roof — Sliding roof Curtain System — Provided with a tarpaulin woven at 9x9 grade, weighing 680 g/m2, having fracture strength of 3500 N/S and 350 N tearing resistance. — Code XL Rear Door — Two side rear doors with recessed locks Side Protectors — Side preventive protectors made from high strength material complied with 70/156 EEC standards

Marka: Serin Model: 2023 Tip: poluprikolica za prevoz metalnog otpada Zapremina: 58 m³ Lokacija: Turska Datum objavljivanja: više od 1 meseca Autoline ID: JD35447 SPECIFICATON 3x AXLES AIR SUSPENSION STEEL STEPFRAME TIPPING TRAILER To be compatible with a 6x2 tractor unit Dimensions APPROXIMATE • Loading capacity 28,000kg • Body Length 10500mm (internal) • Body height FRONT 2200 mm (internal) • Body height REAR 2500mm (internal) • Body width 2550 mm max. (external) • Axles centres 1310 mm • Axles capacity 3x9000 kg Please note the UK requirements is a minimum of 8meters between the centre line of the king pin to the centre line of the rear axle. Body • Floor 5mm. Hardox 450 • Sides 4mm. Hardox 450 Rear Door Opening • Swinging both sides (50% – 50%) with vertical locking gear to each door. • 2 X additional horizontal locking bar fitted, 1 X under each door with handles extending to the rear corner pillars. This enables the driver to open each door separately whilst standing at the side of the trailer (not in the danger zone behind the trailer) Chassis • ‘I’ profile as per your specification (neck depth of 210mm and main chassis depth of 400mm) neck shape to be compatible with a 6x2 tractor unit • FLANGE 15mm X 130mm. Bumper • ‘E’ marked certificated bumper. Rear side of the bumper is designed flat-type. Aspock (ARB-3) • ‘E’ marked certification sticker is affixed to the bumper, in an easily visible position Lateral Protection • E certified side guards compatible with ECE R73 regulation. • 3x100mm horizontal bars, spaced at a max of 300mm. • Maximum 350mm from body line • Maximum 550mm from ground level • Maximum 250mm from front of guard to centre of landing leg • Maximum 2700mm from front of guard to king pin • Maximum 300mm from rear of guard to front of first axle tyre King-pin • EU norms E certificated. 2” King Pin (JOST Brand) Removable from bolts at the bottom. Mechanical Legs • Dual-speed 24 tons. Mechanism on the left acc. to driving direction – JOST Brand. Hydraulic System • Telescopic piston. (minimum 45°- 46° tipping angle). Or equivalent (will be negotiated) Axles • Axle, Brake, Pneumatic brake valve and air tank configurations. AXLE BRAKE PNEUMATIC BRAKE VALVE MINIMUM AIR TANK SIZES BRAKE CHAMBERS SAF DISC WABCO 140 ltrs 2 X 16 (1ST axle ONLY) 4 X 16/24 (2ND & 3RD axle) Suspension • Air suspension with front lift axle Wheels and Tyres • 6x 385/65R 22,5 tyres and wheels rims. Mudguards • 6x individual plastic mudguards with spray suppression flaps ‘E’ marked between each wheel. Brake System • EBS Modulator 2S2M WABCO EBS to match axles above. • Air tanks to be fitted above mid axle within two metres of EBS valve • SAF = 1x60ltr + 1x80ltr air tank- • Air tanks to be fitted above mid axle within two metres of EBS valve Park brake valve • Emergency stop and ramp valve. Ramp valve will be placed on the left according to driving direction. Located in front of the landing leg no more than 3.5meters from the front of the trailer. (Air pipes will not contain any joiners.) Electrical System • According to EU directives 24S 24N with both 2x7 pins 24 volt lighting system connected to 1x15 pins E socket will be included. • 2 X white marker lights on either side at the front of the chassis with amber facing outwards set at body width, in-line with the front of the body. • ASPOCK Weighing system • Vishay PME (MODEL 1155) on board weigh cell system with digital ready out unit fitted to the chassis on the right according to driving direction (OPTIONAL) Painting • After sandblasting, epoxy primer and acrylic painting will be applied. Accessories • Necessary warning signs. ÖZELLİKLER 3x AKSLI HAVA SÜSPANSİYONLU ÇELİK BASAMAKLI ŞASİ DAMPERLİ RÖMORK 6x2 tıra uyumlu olması Boyutlar YAKLAŞIK • Yükleme kapasitesi 28.000kg • Gövde Uzunluğu 10500mm (dahili) • Gövde yüksekliği ÖN 2200 mm (dahili) • Gövde yüksekliği ARKA 2500 mm (dahili) • Gövde genişliği 2550 mm maks. (harici) • Aks merkezleri 1310 mm • Dingil kapasitesi 3x9000 kg KASA • Zemin 5mm. Hardox 450 • Kenarlar 4 mm. Hardox 450 Arka Kapı Açma • Her kapıya dikey kilitleme dişlisi ile çift taraflı (%50 – %50) açılır. • 2 X ek yatay kilitleme çubuğu takılmıştır, her kapının altına 1 X arka köşe direklerine kadar uzanan kulplarla. Bu, sürücünün treylerin yanında dururken (römorkun arkasındaki tehlike bölgesinde değil) her bir kapıyı ayrı ayrı açmasını sağlar. ŞASİ • Spesifikasyonunuza göre 'I' profili (210 mm boyun derinliği ve 400 mm ana şasi derinliği) 6x2 çekiciye uyumlu boyun şekli • FLANŞ 15mm X 130mm • 'E' işaretli sertifikalı tampon. Tamponun arka tarafı düz tip olarak tasarlanmıştır. Aspock (ARB-3) • 'E' işaretli sertifikasyon etiketi, kolayca görülebilecek bir konumda tampona yapıştırılmıştır. Yan Koruma • ECE R73 yönetmeliğine uygun E sertifikalı yan korumalar. • Maksimum 300 mm aralıklı 3x100 mm yatay çubuklar. • Gövde hattından maksimum 350 mm • Zemin seviyesinden maksimum 550 mm • Koruyucunun önünden iniş ayağının merkezine kadar maksimum 250 mm • Muhafazanın önünden kral pime kadar maksimum 2700 mm • Korumanın arkasından birinci aks lastiğinin önüne kadar maksimum 300 mm King pin • AB normlarında E belgelidir. 2” King Pin (JOST Marka) Alttaki civatalardan sökülebilir. Mekanik Ayaklar • Çift hızlı 24 ton. Soldaki mekanizma sürüş yönüne – JOST Markası. Hidrolik sistem • Teleskopik piston. (minimum 45°- 46° devrilme açısı). Veya eşdeğeri Dingiller • Aks, Fren, Pnömatik fren valfi ve hava tankı konfigürasyonları için lütfen aşağıdaki tabloya bakınız. AKS FRENİ PNÖMATİK FREN VALFİ MİNİMUM HAVA TANKI ÖLÇÜLERİ FREN KÖRÜKLERİ SAF DİSK WABCO 140 lt 2 X 16 (YALNIZCA 1. aks) 4 X 16/24 (2ND & 3RD aks) Süspansiyon • Ön kaldırılabilir akslı havalı süspansiyon Jantlar ve Lastikler • 6x 385/65R 22,5 lastikler ve jantlar. Çamurluklar • Her tekerlek arasında 'E' işaretli püskürtme önleyici kanatçıklara sahip 6 adet ayrı plastik çamurluk. Fren sistemi • EBS Modülatörü 2S2M WABCO EBS, yukarıdaki akslara uyacak şekilde. • EBS valfinin iki metre yakınında orta aksın üzerine takılacak hava depoları Hava tankları, orta aksın üzerine, EBS valfinin iki metre yakınına takılacak • Park freni valfi • Acil durdurma ve rampa valfi. Rampa valfi sürüş yönüne göre solda yer alacaktır. Römorkun önünden en fazla 3,5 metre uzaklıkta iniş ayağının önünde bulunur. (Hava boruları herhangi bir birleştirici içermeyecektir.) Elektrik sistemi • EU direktiflerine göre 24S 24N her ikisi de 2x7 pinli 1x15 pinli E sokete bağlı 24 volt aydınlatma sistemi yer alacaktır. • Gövde genişliğinde, gövdenin önü ile aynı hizada, dışa doğru ayarlanmış kehribar renginde, kasanın ön tarafında her iki tarafta 2 X beyaz işaret ışığı. • ASPOK Tartı sistemi • Vishay PME (MODEL 1155), sürüş yönüne göre sağdaki şasiye takılmış dijital hazır çıkış ünitesi ile yerleşik tartım hücresi sistemi (OPSİYONEL) BOYAMA • Kumlama sonrası epoksi astar ve akrilik boya uygulaması yapılacaktır. Aksesuarlar • Gerekli uyarı işaretleri.

Marka: Reis Treyler Tip: prikolica za kontejnere Godina proizvodnje: 04/2023 Prvo registrovanje: 2023-04 Kapacitet podizanja: 27500 kg Neto težina: 5200 kg Ukupna težina: 32700 kg Lokacija: Turska Selçuklu / KONYA Datum objavljivanja: 18. 5. 2024. Autoline ID: QP33521 CONTAINER CARRIER SEMI-TRAILER TECHNICAL SPECIFICATION Tractor Type — 4x2 tractor suitable for 1100mm King Pin Height. (Total GWA 44 tons) Chassis —High Graded Material “I” profile it is produced with gas welding, it has high-quality strength, Standard chassis Type. (Required changes will be made after the order confirmation) —Special reinforced bracket on the square beam profile at the front and rear. —Rear cross twist lock cross member will be 110 mm from the center to the edge of rear bumper. —Rear Bumper and light and license plate holder will be moved to the inner side with 100 mm. —Upper level of the chassis will not exceed 1150 mm with 385 65 R 22,5 tires. Over All Lenght Dimension —Length 9 700 mm x Width 2550 mm x Height 1250 mm —Wheelbase (between king pin and center of axles) +/- 7550 mm Vehicle Type —Skeleton chassis Container twist lock —12 PCS. 1 x 20 feet, 2 x 20 feet, 1 x 30 feet, feet 1 x 40 feet and 1x 45 feet —30 ft. cross member portable place is not needed to reinforce the neck of the chassis. King Pin —2" kingpin and second king pin position. Jost or OMS brand —Pin detachable from below made by SAE standards 8 bolt type. Axles —3 x 09.000 kg carrying capacity SAF brand Disc Brake Type —First axle with lifting mechanism, controlled manually on the chassis Distance Between Axles — 1320 mm Brakes & Suspension —Air Suspension —EBS Brake System KNORR brand, (2S/2M RSS) — Automatic Slack Adjuster —3 units of 80 lt, 40 lt and one spare air tubes Landing gear —Double Speed, —24000 kg carrying capacity SAF —Mechanical Landing Gears Rear Bumper —Suitable 70/221 / AT-version of the rear bumper Tire Chock —Carriers with 2-unit wheel chock Tires and Rimes —6 PCS 385/ 65 R 22,5 Single tire type —Bridgestone brand — 120 offset 22,5 x 11,75 Rim, 280,8 x 335 x 10 wheel stud M 22 x 1,5 Mud Cover —6 Units full plastic mudguards fited with galvanized steel holders. Spear Wheel Carrier —N/A or Optional Toolbox —N/A or Optional —Document holder Water Tank —N/A or Optional Paint —Steel Material surface is cleaned by grit metal and send, which is shot blasted on the surfaces of the metal. —2 Floor Epoxy primers are made and final paint with standard RAL 7024 or demand of the customer, —Galvanization is optional. Electrical System and Lightening System —3 unit’s amber-colored lights placed on both sides —Park lamps at the rear side of the vehicle —License plate lamps, —Reflector triangles, —Flameproof electrical system —2 X 7-pin and 1 x 15-pin electrical socket. (The connection pins will be mounted on special designed front panel) —Electrical system is ASPÖCK brand Euro point 2 or Euro point 3

Marka: Reis Treyler Model: BOX Tip: furgon poluprikolica Godina proizvodnje: 04/2023 Zapremina: 90 m³ Kapacitet podizanja: 27000 kg Neto težina: 5500 kg Ukupna težina: 32500 kg Lokacija: Turska Selçuklu / KONYA Datum objavljivanja: 20. 5. 2024. Autoline ID: WR33764 TECHINCAL SPECIFICATIONS OF PLYWOOD BOX SEMI-TRAILER Truck Tractor Type —4x2 Truck Tractor with fifth wheel height 1100 mm Chassis — ST 52 Material “I” profile it is produced with gas welding, it has high quality strength, Standard Chassis Type, produced according to the 98/91 EEC standards Inner Lenght Dimension —Length 13.600 mm mm x Width 2600 mm x Height 2900 mm Over All Lenght Dimension —Length 13440 mm mm x Width 2480 mm x Height 2700 mm Platform —Phenolic waterproof plywood plate (30 mm) King Pin —2” king pin according to the 94/20 EEC —Pin detachable from below made by SAE standards 8 bolt type JOST Brand. Axles —3 x 09.000 kg carrying capacity SAF brand Disc Brake Type Distance Between Axles —1320 mm Brakes & Suspension —Air Suspension —EBS Brake System KNORR brand, automatic load adjusting valve 71/320 EEC and 2002/78 EC standards — Automatic Slack Adjuster Landing gear —Double Speed, —24000 kg carrying capacity SAF brand —Mechanical Landing Gears Rear Bumper —Suitable 70/221 / AT-version of the rear bumper Tire Chock —Carriers with 1 unit wheel chock Tires and Rimes — 6 PCS 385 65 R 22,5 Single tire type — Goodyear, Bridgestone, Pirelli or Equivalent brand — 120 offset 22,5 x 11,75 Rim, 280,8 x 335 x 10 wheel stud M 22 x 1,5 Mud Cover —6 Units full plastic mudguards fited with galvanized steel holders. Spear Wheel Carrier — 1 piece tire carrier Basket type Tool Box —1 pcs Plastic Tool Box 80 x 50 x 50 cm Paint —Steel Material surface are cleaned by grit metal and send, which is shot blasted on the surfaces of the metal. —2 Floor Epoxy primers are made and final paint with standard RAL 7024 or demand of the customer, total thickness of the paint 150 Electrical System and Lightening System —3 unit’s amber-colored lights placed on the both sides —Park lamps at the rear side of the vehicle (with a protective grill) —License plate lamps, —Reflector triangles, —Flame proof electrical system —2 X 7-pin and 1 x 15-pin electrical socket. Equipment (Tools) —Tool box keys —Ro-Ro Lashing Rings, Fire Extinguisher Box, Rear Ladder, Forklift barriers, Rear Bumper, Optional Accessories —According to the demand optional accsesories will be added in the proposal Side Protectors Side preventive protectors made from high strength material complied with 70/156 EEC standards BOX STRUCTURE Panels Dimensions —Front Wall 20 mm fiberglass reinforced plywood panels —Floor 30 mm waterproof plywood plate —Rear Door 30 mm insulated sandwich panel sandwich panel made from fiberglass and foam —Roof 10 mm polyester fiberglass translucent roof arched crossbeam reinforced 250 mm —Side Panels 20 mm fiberglass reinforced plywood panels Panel Structure —Plywood Panels covered with polyester film with thickness of 30 mm —Sandwich panels made from polyester sheet and foam Inner Lighting — 2 PCS Amber colored lights Rear Door —Two side rear doors with recessed locks, Sandwich panels made from polyester sheet and foam

Marka: Reis Treyler Model: ALUMINUM DAMPER Tip: poluprikolica kipera Godina proizvodnje: 04/2023 Zapremina: 30 m³ Kapacitet podizanja: 39500 kg Neto težina: 6045 kg Ukupna težina: 45545 kg Lokacija: Turska Selçuklu / KONYA Datum objavljivanja: 20. 5. 2024. Autoline ID: BG33521 ALU TIPPER SEMI-TRAILER TECHNICAL SPECIFICATION Chassis —DOMEX 700 MC Material “I” profile it is produced with gas welding, it has high quality strength and reinforces with cross beams from ST-52 material. Box —Build from high graded ALU alloy material with wall thickness 4mm x front and rear wall 4 mm x Floor 5 mm Fifth Wheel Height —1180 mm King Pin —2” king – pin detachable from below made by SAE standards 8 bolt type. Overall Length Dimension —Length 8975 mm x Width 2550 mm x Height 2950 mm Size of the Bucket —Length 7872 mm x Width 2431 mm x Height 1405 mm AxlE —3 x 9000 kg carrying capacity SAF brand Disc Brake System Distance Between Axles — 1320 mm Brakes & Suspension —Air Suspension with front lifting axle —EBS Brake System KNORR brand, 2S2M RSS Stability system 2 —ABS sensor mounted on the center axle. —Air Tank, with capacity of (2 x 60 liters) mounted under the chassis. —Type 24/30 x 2 chambers on 2 axles 4 Units and 24 x 2 Chambers on lifting axle — Emergency stop and ramp valve. Ramp valve will be placed on the left according to driving direction. Located in front of —The landing leg no more than 3.5meters from the front of the trailer. (Air pipes will not contain any joiners.) Landing gear —Double Speed, —24000 kg carrying capacity, —SERIN brand Mechanical Landing Gears, TYPE. Rear Bumper —Suitable 70/221 / AT-version of the rear bumper, Tire Chock —Carriers with 1-unit wheel chock Tires and Rimes —6+1 PCS 385 65 R 22,5 Single tire type — Goodyear, Bridgestone, Pirelli, or Equivalent brand —0 offset 22,5 x 9 Rim, 280,8 x 335 x 10-wheel stud M 22 x 1,5 Mud Cover —6 PCS. Plastic mudguards with plastic edges. Spear Wheel Carrier — 1 Piece tire carrier Reducer type Toolbox —1 PCS Toolbox. Water Tank —40-liter Plastic water tank with liquid soap cup Paint —Steel Material surface are cleaned by grit metal and send which is shot blasted on the surfaces of the metal. —2 Floor Epoxy primers are made and finish acrylic paint will be applied on demand of the customer, PPG Brand Permissible Payload —25,3 ton Tire Weight —6.200 Kg. Truck Tractor Tire Weight —8,5 ton —Our Chassis paint is RAL 7024 Grey-Blue paint of the box nonmetallic Electrical System and Lightening System —3 Units amber-colored lights placed on both side park lamps at the rear side of the vehicle, —license plate lamps, —reflector triangles, —Flame proof electrical system —2 X 7-pin electrical socket. Equipment (Tools) —Toolbox keys, Hydraulic System —5 stage Cold Shooting Steel Profile and Dual Lift with stroke GHS 175 X 5 X 6200 C type HIDROMAS brand. Front lift cylinder with mounting brackets Tipping Weight 45– 50 tons, —OIL TANK AND PTO NOT INCLUDED IN THE PRICE Volume —30 m ³ Tire Weight —7,2 ton Max. Payload —27,5 ton Permissible Payload —25,5 ton