This 3-axis HAAS ST 30Y Lathe was manufactured in 2022. It features a spindle speed of up to 3400 rpm and a maximum torque of 407.0 Nm at 500 rpm. The sub-spindle supports a maximum speed of 4100 rpm with a chuck size of 165 mm. The turret accommodates 12 tool stations, and the machine has a coolant capacity of 208 liters. For those interested in the HAAS ST 30Y Lathe we have for sale, reach out for further details regarding this Lathe. application type: Turning Location: Slovenia machine type: Lathe availability: Immediately GINDUMAC ID: SI-TUR-HAA-2022-00001 Number of spindles: 3 Spindle speed range: 3400 rpm // 60 rpm // 4100 rpm 1/MIN Spindle motor power: 22.4 kW 30.0 hp Spindle bore: ø 88.9 mm 3.50 in Number of axis: 3 X-AXIS Rapid traverse: 12 m/min 406 ipm Y-AXIS Rapid traverse: 12 m/min 406 ipm Z-AXIS Rapid traverse: 24 m/min 945 ipm Number of turrets: 1 Number of stations: 12 Stations Air pressure: 5.5 bar 80 psi Max thrust x: 18238 n 4100 lbf // max thrust y: 10231 n 2300 lbf // max thrust z: 22686 n 5100 lbf- Spindle max rating: 22. 4 kw 30. 0 hp // spindle max torque: 407. 0 nm @ 500 rpm 300. 0 ft-lbf @ 500 rpm // spindle max torque w/opt gearbox: 1356 nm @ 150 rpm 1000 ft-lbf @ 150 rpm- Main spindle c axis max rating: 3. 7 kw 5. 0 hp // main spindle c axis positioning (±): 0. 01 ° // main spindle c axis brake diameter: 353 mm 13. 9 in // main spindle c axis brake holding torque: 339 nm 250 ft-lbf- Sub-spindle drawbar adapter bore: Ø 46. 0 mm x 78. 5 mm deep Ø 1. 18 in x 3. 09 in deep // sub-spindle drawbar bore (non-through): Ø 26. 2 mm x 124. 7 mm deep Ø 1. 03 in x 4. 91 in deep // sub-spindle bore (without chuck and drawbar installed): 58. 7 mm 2. 31 in // sub-spindle integrated brake torque: 23 n/m 17 ft-lbf // sub-spindle orientation accuracy (requires so): ± 0. 02 ° // sub-spindle rapids (b-axis): 10 m/min 400 ipm- Turret od vs id tools: any combination (will vary with turret) // turret boring bar rear clearance (from back of turret): 102. 0 mm 4. 00 in- Live tooling max speed: 4000 rpm // live tooling tooling: bmt65- Air required: 113 l/min @ 6. 9 bar 4 scfm @ 100 psi // inline air hose: 3/8 in- Coupler (air): 3/8 in- Drive system: direct speed belt drive- Input ac voltage (3 phase) - low: 220 vac // full load amps (3 phase) - low: 70 a // input ac voltage (3 phase) - high: 440 vac // full load amps (3 phase) - high: 35 a Poruka Poruka